Slideshow auto run issue?

I notice that when you create an auto run slideshow, if you include thumbnails or back and forward arrows, once the thumbnails or arrows are used - thus interrupting the auto run - the show does not restart to auto run afterwards and there is no play button to re start it?
Phil

Hello Phil,
It is the expected behaviour of Slideshow. When an autoplay is interrupted then it cannot be started again.
The only options in that case for user is to either use the back and forward arrows or refresh the page to start the slideshow again from the beginning.
Regards,
Sachin

Similar Messages

In Slideshow, auto timing to music length

When selecting a music track to run against a slideshow, auto-adjust the length in seconds the image is displayed based on the length of the music selection. Make this optional. So as an example, you have 20 images in a slideshow, with a track that lasts 2 minutes. In this case you would auto adjust the display to be 6 seconds per image.
Jay S.

I agree that it's quite bad to have a feature so blatantly not working as it's supposed to... Since I have no idea how to succesfully work around this issue in LR4 I tried other options for the slideshow feature...
FotoMagico seem solid and has additional features as individual slide duration and individual transition times... It has some quirks too... The audio fades with the slide transition at times... The biggest draw back (and maybe I haven't found good settings yet) is that the rendered 720p HD slideshow didn't look half as good as the one rendered in LR4 at pretty much the same file size...
Then I tried Aperture... Which has pretty neat slideshow functions as well... Lets you adjust the audio placement freely... But the filesize exported with the standard 720p setting was about 4 times bigger... Now doing tests what custom settings will yield acceptable quality files with acceptable filesizes.
D.

KODI/XBMC auto run and script problems?

I started a project a couple weeks ago to build a htpc using xbmc/kodi. I wanted to be able to play retro and steam games. So I've installed emulationstation and steam. Now comes the tricky part (for me anyways), writing bash scripts to access the programs through Advanced Program Launcher. Once I finally got that set up, I set the computer to login automatically and to auto run kodi. And here's where the issue happens. Normally when I run the simple script below, it closes kodi, and opens the program (so only one program is running at a time). However if I try to access the program from the auto-run instance of kodi, it doesn't close kodi before running. Instead, it opens the program and then opens another version of kodi. So if I press alt-tab it shows "kodi/emulationstation/kodi", so I have 3 programs open instead of 1 and trying to close any of them starts a cycle of new instances opening that causes a crash....
#bin/bash
killall -9 kodi.bin
emulationstation
kodi &
So since everything runs fine when I start kodi by hand (icon and terminal), I'm assuming the problem is the way I'm auto starting the program? I've used the autostart section under the LXsession configuration, trying @kodi and @lxterminal -e kodi but both produce the same problem. Is there another/better way to autostart a program that I can do this? Or do you guys think it's an issue with the script?
Thank in advance!!
I'm running Arch 64 bit with the LXDE desktop.

How do you autostart kodi ? By enabling the service ?
In that case killing kodi would make it restart.

Auto run file for installation of HP Officejet 8500 Pro A909g Missing from driver download

I have a HP Officejet 8500 Pro A909g. I downloaded the new Windows 8.1 64 bit driver as 8.1 would not allow the scanner to operate on the existing driver. Printing was fine. When i went to install the wizard, auto run file for the wizard is missing and so the installation can not run and instal the new driver.

Hello IanHP8500,
Welcome to the HP Forums.
I see that you're having an issue getting your Officejet 8500 scanning on Windows 8.1. I will do my best to help you with this issue.
Did you upgrade to 8.1 from an older version of Windows?
If so, with it not scanning correctly. You can try just removing the HP Solution Center from programs and features.
Go to the bottom left corner of your screen right click on the Windows icon> go to Control Panel> Go to Programs> uninstall Solution Center if it's listed.
Next, instead of using the printer install wizard. Download the software from this link: HP Officejet Pro Full Feature Software and Driver. Let it run through, it should prompt to " add more software". This should allow you to reinstall Solution Center.
If you run into issues, there is something you may have to do. If you get a file missing error here, or the install hangs check your computer for the following.
McAfee Live Safe - Disable the "Realtime Scanning".
Check for and remove HPOINS*.dat or HPWINS*.dat. Here is a link to a post by JonW on how to do this: Re: installer setup hangs under Windows 8.1.
Try all of this, and let me know how you make out. Thank you for posting on the HP Forums.
I worked on behalf of HP.

Auto Run in Dashboard

I have created a Publisher report based on OBIEE Answers I have 'Auto Run' checked. The report is not auto-running I have to click on the View button. Has anyone come across this?
I really want the report to auto-run so I can remove the controls.

You can't for the Macintosh. The ability to autorun a cd was removed after a security issue under OS9 back in the 90s. Since OSX came out it is not possible to make an autorun CD.
But perhaps you were thinking of that other platform....
In many cases it is possible you just need to create an ini file or something like that. I can't remember exactly but I have done it before and it is easy. You can easily search with google to find out how.
However a lot of folks have disabled the feature in windows as well since it is such a security risk. So you should have an alternate plan to make it easy for your users to start it on their own as well.

Auto Run in Flash

Hi,
Is it possible to create an Auto Run cd in Flash without having any extra software? I want to be able to create a cd that runs automatically with buttons on the menu that will take the user to individual files? Do I need special software to do this?
Thanks for your help!

You can't for the Macintosh. The ability to autorun a cd was removed after a security issue under OS9 back in the 90s. Since OSX came out it is not possible to make an autorun CD.
But perhaps you were thinking of that other platform....
In many cases it is possible you just need to create an ini file or something like that. I can't remember exactly but I have done it before and it is easy. You can easily search with google to find out how.
However a lot of folks have disabled the feature in windows as well since it is such a security risk. So you should have an alternate plan to make it easy for your users to start it on their own as well.

Auto Run won't work

I can't get the auto run feature to work for placing content
on a CD. Any Thoughts PLEASE? Thank you!

Yes, I have a thought. Don't double-post issues to the
fourms. We'll see your (single) post and offer help if we have any
to offer, but double posting is like SHOUTING or cursing - it is
rude and wastes our time. It is also a violation of forum rules.
You're welcome - see your duplicate post for a suggestion
about your problem.
.

No auto run on CS4 student licensing

I just purchased CS4 Design Standard to install on an HP laptop running Vista 64, sp1. I purchased it this summer, so it is fairly new. When I tried to install from the first disc in the case entitled, "Application 2," I get the following error message:
E:\
Application not found
There are no auto run or setup.exe for CS4 on the disc.
The other disc, "Content," does not have anything to install - just pdf files and such - no programs.
I have sent an email outlining the problem and looked through the forums, but didn't see this specific issue.
Any ideas?

There were earlier reports of academic packages missing a DVD. The only
thing I can suggest is calling Adobe.
Bob

How to enable check number from manual entry to auto running?

Hi,
Does anyone knows how to enable auto running of check number (in outgoing payment) for a particular bank account?
I had tried to set it in Administration -> Setup -> Banking -> House Bank Account. In the "Next Check Number" field, i have set a check number. However, when I create a outgoing payment, in the payment means -> check tab, i select the bank and account code, the check number doesn't auto-default to next number.
Thanks!
sianghing

Hi
check this out and find your solution,
Outgoing Payment- Check
In outgoing payment when cheque number issue ..
gud luck
RIYAZ

"Auto stop" and "Auto Run" function exist?

"Auto stop" and "Auto Run" function exist?

many thanks...
full of ????
cracking this project issue...
Attachments:
AMK_solar monitoring system.vi ‏1451 KB
datalogger.vi ‏26 KB
Start.vi ‏22 KB

Building a LabVIEW installer that auto runs

Hello,
I am looking for a tutorial that gives the steps on creating an installer. I need to have the installer copied to a DVD for distrubution. I am wondering if there is a way to have the install run once the DVD in inserted like an "Auto Run" Is this possible? The next best I guess would be to include a readme file which I will probably have anyways. I have always written the program on the PC that it will be used on so creating an installer is new to me.
Thanks,
John

Depends on the environment, but if we are talking Windows you need to make an autorunrun.inf, then burn the DVD with the software and the autorun.inf on the root of the DVD.
http://www.computerhope.com/issues/ch000670.htm
Keep in mind that in Windows can be configured to not use the autorun.inf for security reasons. If this is enabled you won't be able to use this feature.
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

How to set Lion built-in FTP Server auto run off

Hello all.
I set FTP Server by using Rumpus Server application.
But Lion's built-in FTP Server is running on the front.
So if I try to connect my FTP Server out of my LAN, I can only connect to the built-in FTP Server despite I wanted to connect Rumpus FTP Server.
It can be solved by unload the built-in FTP Server(using sudo -s launchctl unload...) but every after rebooting I should set it because it is set to run automatically in every booting.
How can I set the auto run off?

well, the ftp server (=ftpd) takes account info from the user list for your mac. so, go to the system settings on your mac, then to users, and then just add another user with a password of your choice (tap on the little plus-sign to add a user!). this will then be a valid user for your ftp server after you restart your ftp server.
the other thing you want to do, about the home directory, is called chroot. you can set the home directory of a specific ftp-user to be another directory then the standard. for this, there are configuration directives in the configuration file in /private/etc/ftpd.conf which you have to edit by hand. so make sure what you do there.
you should read this before editing the file, this will give you a better understanding of what to put there: https://developer.apple.com/library/mac/documentation/darwin/reference/manpages/ man8/tnftpd.8.html

Job Schedule - Doesn't auto run at a given time.

Hi
I hope you can help. I have set up the job below:
DECLARE
X NUMBER;
BEGIN
[i] SYS.DBMS_JOB.SUBMIT
( job => X
,what => 'REPORTING_API_12_IR02;'
,next_date => to_date('13/02/2006 15:58:27','dd/mm/yyyy hh24:mi:ss')
,interval => 'TRUNC(SYSDATE+1)'
,no_parse => TRUE
SYS.DBMS_OUTPUT.PUT_LINE('Job Number is: ' || to_char(x));
END;
commit;
It compiles and is viewable from dba_jobs, but for some reason doesn't seem to auto run at the times given.
Can anyone help?
Thanks.

i tried to view that with:
show parameter job_queue_processes
and got the following error:
SQL> show parameter job_queue_processes
unknown SHOW option "parameter"
unknown SHOW option beginning "job_queue_..."
anything wrong with my statements?
thanks again

SSRS 2008 R2 Report parameters have default values and report not to auto run

Hi, I am using SSRS 2008 R2 one of my requirements for a Report is all the parameters have default value and I do not want this report to auto run when users open this report. I can create a dummy hidden parameter to break the auto run for this
report. But I am looking for solutions other than that.
Thanks in advance..........
Ione

Hi lone,
According to your description, you have a report with parameters. Now you want you report not to run automatically with your parameters default values. Right?
In Reporting Service, if you have parameters with default values in your report, your report will always auto run with these default values. We can say these default values are used for report running initially. So for your requirement, if you really need
to see your default value before the report running, the best workaround is set one more parameter to break the auto run like you have done. If you just want your report not to auto run, your can achieve it by removing those default values.
Reference:
Report Parameters (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou (Pactera)

Auto Goods Issue not taking place

Hii All
I hv Maintained backflush indictor in work center and in MRP2 view it is maintained as Workcenter
decides whether to backfluch .
But the auto goods issue is not taking place when the production order is saved and confirmed.
The stock remains the same ..
Can anybody tell the reason for that
Regds
Rakesh

Hi Rakesh,
what is the control key u have maintained in Routing?
if u r using Control key PP01 - Routing/Ref. op. set - internal proc., then after Production Order confirmation u have to do MB31- Goods Receipt for Order, with movement type 101.
If u r using PP03 Routing - in-house prod. auto. goods rct, then it accepts only single operation in a Routing (or) if u r having say more than one operations in a routing, then u have to give PP03 control key for the last operation.
I think u got it...
revert back if u have doubts.
Thanks & Regards,
Santosh

Slideshow auto run issue?

Similar Messages

Maybe you are looking for