Slideshow crop photos problem when i close the thumbnail botton
In the slideshow i use thumbnail photo "turned on" to change the pictures (is it the only way to do it?) and manage them with crop function but when i later close thumbnail (i don't want visible) photos resize. Any suggestion ?
I have not a link yet, i'm preparing the graphic layout at the time. I bypassed the problem importing in muse the right photos size without use crop. Maybe i should see better edit photo functions tutorials. I'm new with Muse.
Il giorno 09/ago/2013, alle ore 01.37, Brad Lawryk ha scritto:
Re: slideshow crop photos problem when i close the thumbnail botton
created by Brad Lawryk in Help with using Adobe Muse CC - View the full discussion
Can you provide a link or screenshots so we can see what you are doing and what you are trying to achieve?
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5579245#5579245
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5579245#5579245
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5579245#5579245. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Help with using Adobe Muse CC by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.
Similar Messages
-
I have a problem when i close the prgram and i open it agin it open on the page which i closed at it
when i close firefox at any page and also when i close my pc and then i open the program i find it open on last page which i closed at ,, although i made home page for it to open at and it doesn't make the order
Check in preferences > general > Startup: Do you have "Show my windows and tabs from last time" selected? If so change to "Show my home page" (or blank page).
Note: this may happen when quitting Firefox, and you inadvertently click "Save and Quit" and select "Do not ask next time". -
Slideshow resize photos problem
Hi there,
Yesterday I did a wonderful slideshow ( basic) in Muse with 3 variants of each of the used motives.
Today, I worked on the slideshow, and now - the pics appear in different sizes although they have the same pix-size.
What is a stake here - anybody know?
MichaelI have not a link yet, i'm preparing the graphic layout at the time. I bypassed the problem importing in muse the right photos size without use crop. Maybe i should see better edit photo functions tutorials. I'm new with Muse.
Il giorno 09/ago/2013, alle ore 01.37, Brad Lawryk ha scritto:
Re: slideshow crop photos problem when i close the thumbnail botton
created by Brad Lawryk in Help with using Adobe Muse CC - View the full discussion
Can you provide a link or screenshots so we can see what you are doing and what you are trying to achieve?
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5579245#5579245
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5579245#5579245
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5579245#5579245. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Help with using Adobe Muse CC by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
I am using elements & premiere 12 on my PC using windows 7. My problem is that photos in portrait view in slideshow are OK but when I move the slideshow to premiere to edit included video the portrait photos turn side-on and stretch when still in portrait view. Is there any way to prevent this from happening? Any comments would be appreciated.
Bruce369
What is the Output option that you are selecting for the transfer of the Elements Organizer 12/12.1 slideshow to Premiere Elements 12/12.1 Editor?
If you are using Edit with Premiere Elements output option, are you using the Premiere Elements command to break apart the Elements Organizer slideshow and then applying rotation to the portrait files? Or, it is this more than just a photo rotation matter?
More on this in the morning.
Please review and consider.
Thank you.
ATR -
After creating a new slideshow I export it with the setting HD 1080p it is then saved as a .mov i then create a dvd in idvd and the quality is not as good as the original photo's when viewed on the monitor or a TV, am i doing something wrong?
DVD's are only 640 x 480 (interlaced), so yes, the quality is not nearly as good. You should probably create your .mov in DV format to best match the DVD format
-
Adobe Flash Player 10, when installed, closes the whole computer when it is used to play any clip from U Tube or other source. I uninstalled it and there was no further trouble but, of course, I cannot view the clip. If I reinstall it the same problem persists. I have contacted my 'computer guru' but his comment is that many of his clients have the same problem but it appears to be a problem with Adobe however many other friends have put in the version 10 Flash Player and have no problems. I do not appear to have any other problems with the computer such as viruses etc and it is scanned very day for such items. I would appreciate any advice you can give as it is very annoying, thanks, RAB
Me too!
On both IE8 and Firefox. Win 7 32 bit on IBM T42 - 1GB ram.
Old laptop I know but the 10.1.x.x Flash Players worked just fine. Problem started with 10.2.152.26 flash player.
Now BBC TV live and iPlayer work just fine, however YouTube does not - audio but no video. Just a black rectangle where the video should be.
Right click to get the menu and "settings" is greyed out. However select the pop-out option and the video plays. Right click on the pop-out and "settings" is available. So deselect "enable hardware acceleration", close the pop-out and refresh the window (F5) and now YouTube videos play. Switch hardware acceleration back on and now they don't.
This video works fine with hardware acceleration enabled. http://www.adobe.com/products/flashplayer/features/video/h264/
These also work. http://www.adobe.com/devnet/flashplayer/stagevideo.html
Something broken in 10.2, I think. -
When I close the cover - it really does take a picture and saves a photo. Luckly, it make a click, and pictures are seen in the photo album, and it does not appear to be forwarding. It is just gobbling memory and annoying as I can only delete these pictures one at a time.
It seems to take a picture of the counter top = I do not see the keyboard.
I am wondering ....It may be a kids game app that takes pictures of the screen or out the back camera. I am starting to think it may just be a sound effect when placing the iPad on its screen. So many things that may be unrelated but coincedental. It started in May (the sound) and so did the multiple pictures - starting to think they are not related.
Thanks for the quick tip on deleting multiple pictures. -
My Photoshop Elements 9.0.3 will not crop photos as it did in the past. When I use the crop tool, the photo is changed to the size of a dot and is unrecognizable. Can this be fixed?
Click image for larger view:
-
Normaly it goes to sleep, when I close the Lid, but suddently this function stopped. That means that Mac'en still is running and become warm, during transport.
(Macbook Air 13 ", medio 2011, 1,7 core i5, 4 MB ram, 256 GB, iMac 22", Timecapsule 1 TB, Airport Express, 2 Iphone 4, 1 iPhone 3s, iPad2)Test after each of the following steps that you haven’t already tried:
Step 1
▹ System Preferences ▹ Print & Scan ▹ Open Print Queue...
Check all printers for unfinished jobs. Deal with any you find.
Step 2
▹ System Preferences ▹ Energy Saver ▹ Power Adapter ▹ Wake for network access: uncheck. You may need to unlock the preference pane by clicking the lock icon in the lower left corner and entering your administrator password.
Step 3
▹ System Preferences ▹ Energy Saver ▹ Schedule… ▹ Start up or wake: uncheck
Step 4
Disconnect all wired peripherals except keyboard, mouse or trackball, and monitor, if applicable.
Step 5
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Activity Monitor in the page that opens.
Select All Processes from the menu in the toolbar of the Activity Monitor window, if not already selected. Enter “powerd” (without the quotes) in the "Filter" text field. Select the powerd process and click the Quit Process button in the toobar (stop-sign icon.) In the sheet that opens, click Force Quit. You’ll be prompted for your administrator password. The process will be relaunched immediately.
Step 6
Boot in safe mode and log in. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Note: If FileVault is enabled under Mac OS X 10.7 or later, or if a firmware password is set, you can’t boot in safe mode.
Safe mode is much slower to boot and run than normal. Don’t launch any applications at first. If sleep still doesn’t work properly, back up all data and reinstall the Mac OS. After that, if you still have the issue, make a “Genius” appointment at an Apple Store to have the machine tested.
If sleep now works as expected, go on to the next step.
Step 7
Still in safe mode, launch the usual set of applications that are running when you have the problem, including your login items, one at a time, testing after each one. Some applications may not work; skip them. You might be able to identify the cause of the problem this way.
Step 8
If sleep is still working after you’ve launched all the usual applications, reboot as usual (not in safe mode) and test again. If sleep still works, you’re done, at least for the moment.
If you still have the sleep issue after booting out of safe mode, post again. -
Hi All, I have question about the iMac operating system. I have the last updated. The problem when I manage the place of the folder windows they are all mixing up. I mean they not on the place where I left them. how to set they stay on the same place? I know there are different possibilities to set.
I tried but it not helped for me. What I can do? How and where can set this they stay on their place?
Thanks.
laciOption 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD -
Since I installed Lion on my macbook the LED light does not pulse when I close the screen - the sleep function does not work neither when chosen after pressing the button nor chosen in the apple menu..
I have had the same problem but on another forum it was suggested that disabling internet sharing would solve this. This fix seems to work on my machine - why it works I do not understand
-
A rundown of what I've tried:
Adjusting energy settings to try to prevent sleep
Pluging the USB keyboard and wacom tablet directly into the laptop (as opposed to a usb hub)
My laptop's power cable is connected
My display (a Vizio TV) is recognized in the System Preferences panel
I'd been using this TV for about a year with my older Macbook Pro (OS 10.5.8), though using a different wireless keyboard and mouse
***Update: The issue seems to lie with the keyboard and wacom tablet. I am trying to use a wireless Case Logic keyboard (with dongal) and wired wacom tablet to wake the Macbook Pro in clamshell mode. To experiment, I tried using my Logitech wireless keyboard & mouse set (also dongal) that I had been using before and it wakes the computer without any problems! However, I really need to be able to use my wacom tablet. If I switch to the tablet after waking the computer using the Logitech keyboard & mouse it works, but once the computer sleeps it won't work anymore. I could keep switching back and forth I suppose, but it's sort of a pain. There has to be an easier way! Any ideas why the wired wacom tablet is unable to wake the computer in clamshell mode?
Thanks!So your keyboard or mouse won't wake the Mac when you close the lid correct? Try resetting the SMC and pram
Shut down the computer.
Disconnect the MagSafe power adapter from the computer, if it's connected.
Remove the battery.
Press and hold the power button for 5 seconds.
Release the power button.
Reconnect the battery and MagSafe power adapter.
Press the power button to turn on the computer.
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys. -
My macbook pro won't go to sleep when I close the lid
I've been having this problem for a couple of years now, and it's getting pretty annoying.
I got this MacBook Pro in April of 2011. Otherwise, it works great. It goes to sleep when I go up to the apple menu and select "sleep." BUT, when I close the lid, it stays on. Heaven forbid I don't have it plugged in, because then the battery will be shot! It also won't go to sleep automatically when I leave it for a long time. Yet another potential battery drain.
How do I fix it so that it goes to sleep automatically when I close the lid and when I leave it alone for a while?
In Energy Saver, I have checked all the boxes necessary: "Put the hard disk(s) to sleep when possible" "Wake for network access" and "Automatically reduce brightness before display goes to sleep."
Am I missing something here, or does my computer just have a defect?I had the same issue.
I used an external monitor but all of a sudden when I closed the lid my Macbook Pro did not go to sleep!
I solved the problem with a SMC reset.
Try to do it... -
Hey, I am new to mac and still getting used to it (making the transition from windows), its amazing! Anyhow, I cannot figure out why my itunes and other media like youtube or a film on vlc player continues to play once the lid has been closed. I thought that when i close the lid the macbook should then sleep. It does everytime when there is nothing playing. The little white light on the bottom right hand corner of the book is on but music continues to play.
The sleep option always works. If I press the power button and choose the option sleep it does so etcc.
Is this normal and am I just being stupid or is there a problem??
I bought the laptop from ebay, its a macbook pro late 2011 17inch. I dont have apple support and might have to make a trip into London to the mac store however I was hoping someone can help me...
Processor 2.4 GHz Intel Core i7
Memory 4 GB 1333 MHz DDR3
Graphics Intel HD Graphics 3000 384 MB
Software Mac OS X Lion 10.7.5 (11G63)
Thanks if you can it is muc appreciated....!!hey, thanks for the reply. I don't know to be perfectly honest. When I close the lid without any music playing it sleeps fine. How could I check?
So basically I pressed the power button and pressed sleep. The laptop turned off and the little white light turned on no problem. I did the same thing with closing the lid and it went to sleep no problem. (Can you confirm that when the little white light is on it means the laptop is sleeping)??.
I then had itunes playing and pressed the power button and when i pressed sleep the music paused then 6 seconds later it went to sleep. I then had itunes playing and closed the lid and the music kept on playing even though the white light was on.
What do you think jessejarvi? -
I open many tabs on firefox, many times when I close the first tab, the entire window closes, and I have to reopen the browser. When I try that many times I get a message saying something like "Firefox is running Cannot open another window". When I checked the Task Manager I see firefox.exe and plugin-container.exe running. but the firefox is nowhere to be seen. Once I "End Task" these two, I can start firefox. This thing happens many times
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
See also:
*http://kb.mozillazine.org/Firefox_crashes
*https://support.mozilla.org/kb/Firefox+crashes
Maybe you are looking for
-
Do you want to leverage your business, technical and interpersonal skills to position SAP software solutions to overcome business challenges and help prospective customers "Run Better"? Do you want to be rewarded financially and professionally for de
-
Labview crashing - running dll. motorbee
Hi, I'm a student doing my masters project. I'm trying to run a dc motor with the driver board and software called motorway from pc-control.co.uk The board came with some software to run it and I have the dll. and header files. I have managed to impo
-
P7-1058uk, with upgraded PSU. Trying to install a GeForce GTX 780Ti
I have a P7-1058UK system, which I've already upgraded the PSU in to a 700W (branded) unit. Until now I've been running an ASUS Radeon HD 5870, which uses both the 8 PIN and 6PIN aux PCIE connectors from the PSU, and the 16x PCI-E 3.0 slot on the mot
-
Can Oracel Application Server 10g R2 (10.1.2.0.2) with forms/reports and sso be installed on 1 server. We have AD/OID sync. OS is Windows NT. IF so will 4G and dual cpu Dell server be enough. Regards v
-
OIF Authentication Failing - UserID : anonymous - Internal Error
Hi, We have implemented SSO in our environment. After credentials are entered in the login page (protected by OAM), we get 500 internal server error on the browser. In the OIF logs, we see the following exception: [2013-01-17T04:27:24.730-05:00] [wls