Slideshow cuts off images when site uploaded

check out the error on the published site..maranatha.co.uk
the slideshow cuts of portions of the images, or sometimes one of the images drops out of the slideshow.
the issue doesnt occur in design mode.Generally and only generally it occurs in the preview mode, and invariably on uploading the site.
i move the elements of the slideshow around when i am creating a custom version.. but this cant be wrong to do?.
i have text on top of each slideshow image usually...again surely this is normal.
using muse CC
help! is there any wrinkle with the slideshow widget that i should know about...what can i do to fix this?

Try the link below. I had a "cropping" problem when trying to use a full page lightbox slideshow. and it was eventually answered here:
http://forums.adobe.com/message/6128470#6128470
I hope this helps.

Similar Messages

Unwanted margin cutting off design when printing document

I've laid out a design in InDesign that is meant to be printed on a precut 5.5" square card. The document is set up as a 5.5" square with no margins... my design is set to the edge of the card on the screen. when i print on 8.5"x11" everything is fine all images appear - nothing is cut off. when i print on my precut cards the images get cut off by a 1/8" margin on all edges of the card. printer settings are set to have no margins as well. i've never had this problem before and can't seem to solve it. i tried to make the document a PDF and print it that way but the same thing happened. i contacted epson (i print with an epson RX595) and this is what they said:
"The program that you are having problems printing from probably requires a Postscript Printer Definition (PPD) and this printer does not have one available from Epson. In order to get a PPD for the printer, you will need to look for third party RIP programs that will work with your printer.
Another option may be to save the file as a PDF before printing as this will mask PS fonts and EPS files (even if you do not use PS fonts this may be necessary).
If the issue persists, we recommend contacting the program vendor or Apple for additional support."
any help on this issue would be greatly appreciated!! thanks!

Just a guess, but if this is a borderless printer you probably need to click the setup button in the print dialog to access the driver settings, and pick the borderless page size there, then set the size inthe print dialog to "defined by driver."
Peter

I'm trying to make a slideshow in iMovie, but when I upload photos from my Aperture Library into the iMovie Photo Browser some photos (305 out of 427) are missing. How do I get iMovie to upload all of them?

I'm trying to make a slideshow in iMovie, but when I upload photos from my Aperture Library into the iMovie Photo Browser, some photos (305 out of 427) are missing. How do I get iMovie to upload all of them?

I have same problem. I could only see a fraction of my project photos if I browse the Aperture lbrary. It is the same problem when I sync the aperture photos to my iPhone or iPad. I still cannot solve it but I know a way to go around it for your iMovie to see the pictures so that you can work on your iMovie.
Here is the work around:
Export the photos from your album to your hard disk and re-import into your iPhoto. Now you should be able to see those photos that you want to work on in iMovie when you browse your iPhot library.

RH11 - Cuts off tables when I generate review PDFs. How do I get it to include the entire table?

We just upgraded from RH9 to Rh11. I'm using the Create PDF for Review... option on the Review menu. I have several two column tables in the topic I'm sending for review. The PDF cuts off half of the second column in the tables. We didn't have this issue with RH9. Has anyone else had this problem with the PDF review feature in RH11? Can you tell me why it's doing this & how to fix it?
Thanks

Hi Peter and everyone else.
I started using RH 11 recently, and I am experiencing the same issue as CathyR-Fico reported: when generating the PDF output, RH keeps cropping some of my tables.
NOTE: some of my table cells contain long non-breakable text strings such as TimeoutInsightServerUpDisconnectedCheck. Can't avoid that.
I looked into the table properties and ensured that my table width is 100%, and adjusted the individual column width % to make sure that the total does not exceed 100%, but my tables are still cropped in PDF.
Here is a passage from the RH 11 User Guide, Create a PDF for review section: "Tables, images, and other elements that do not fit in a page are cropped." I keep checking my HTML preview now and then - all of my tables fit into the HTML help window. But the PDF output looks otherwise:( I tried the AutoFit feature as well - won't help:(
My question is: Is there any other way to ensure that my tables fit into any output page, be it PDF, Word or HTML?
Thanks!

Illustrator CC 2014 - save for web cuts off image

In Illustrator CC 2014 when I save a vector image with a thick stroke (e.g. 20pt) while using save for web and clipping to the image (so not selecting clip to artboard) and scaling to e.g. 20%, then the edges of the drawing are cut off.
I'm not completely sure but I think previous versions didn't have this issue.
If I save the image at 100% no edges are cut off.
I suppose save for web uses the center of the vector line to determine where to cut off the image if the image is scaled down.
But it should use the outer 'edge' of the stroke to cut off the image.
Any ideas to the cause or solution?
P.S.: Yes, I'm a Windows user ;-)

I've ticked Edit>Preferences>General>Use Preview Bounds
That would seem the right way to solve the issue but the problem remains.
Maybe the origin of the issue isn't because of the centre of the path / artwork size.
Since there is no problem (with or without "Use Preview Bounds" ticked) using Save for web while scaling at 100% (or higher).
The clipping only occurs when scaling down.

Epson 9800 cuts off image

I just got an Epson 9800, and when I print from Photoshop, it cuts off the image drastically. I'm printing a 22" x 3" image to a 24-inch roll of clear film. The printer only prints about 7.75 inches at the right side of the film.
I've got all the latest drivers installed. I also installed Epson's OSX 10.5 common updater and restarted.
My page setup looks good -- I created a custom page size of 23" x 4", big enough to fit the image on the roll with room to spare. In the print dialog box, the paper choice is "roll." The printer shows that it's printing from a roll, autocut. No matter what I try, only about 7.75 inches of the image will print.
Any suggestions to fix this? Many thanks! I'm going nuts.

I've got a little more information on my printing problem. It's not just Photoshop -- the same thing is happening in Illustrator.
But here's the weird part: only SOME image files are getting cut off. I can print one file (a PNG file, say) and it prints fine. The next PNG will be drastically cut off. I can print a vector graphic just fine, and the next one, which is roughly the same size, gets cut off.
For the life of me, I can't find any difference between the files that are getting cut off and the ones that aren't. Suggestions welcome!

Illustrator cutting off 2" when printing

Illustrator 9.0; WIN2000; HP Deskjet 722C -- Working on pages in Illustrator with photos & copy; the print copies have started coming out with about 2" cut off the bottom of the page; tried changing document setting to legal length but keeping content within the letter-size dimensions, hoping to "fool" the printer with a "longer" print area, but not to be. Any ideas about what's going on and how to remedy?
Tried to .pdf the file(s): First time I .pdf'd it, it printed correctly (with no cut-off); second time I printed it, some gremlin decided to change the fonts to Uzbekistanese or some such -- very strange graphic.... So -- .pdf gives back the complete printable page (still, why doesn't Illustrator?), but takes away my font choices; .pdf comes up with the Uzb font about four times out of five or six ...
Sure would be nice (!) if Adobe Illlustrator wouldn't decide to make changes to my print commands on its own ....
Many thanks for any help

A few things could go wonky and cause this problem (Illustrator being the most fussy of all the Adobe products when it comes to printing).
Artboard - Check to make sure your artboard includes all of your image, i know it's obvious but sometimes you can overlap the boarder if you have a very detailed image without noticing.
Print Paper Size - For some printers you need to set the paper size in the general tab of illustrator as well as in the "Printer" sections and the "Page Setup" section (these are the buttons under the display)
Check your display and if your image is being cut-off there then drag it around (inside the preview window) until it's centered. If all of it won't fit then use the scale options under the General section.
Let me know if all of that doesn't solve the problem, because it's always something small that i forget to do, when Illustrator is giving me printing problems.

Cutting off calendar when printing

Since upgrading to Lion the ical is cutting off part of the calendar when printing? Anyone else having this issue? Thanks

A few things could go wonky and cause this problem (Illustrator being the most fussy of all the Adobe products when it comes to printing).
Artboard - Check to make sure your artboard includes all of your image, i know it's obvious but sometimes you can overlap the boarder if you have a very detailed image without noticing.
Print Paper Size - For some printers you need to set the paper size in the general tab of illustrator as well as in the "Printer" sections and the "Page Setup" section (these are the buttons under the display)
Check your display and if your image is being cut-off there then drag it around (inside the preview window) until it's centered. If all of it won't fit then use the scale options under the General section.
Let me know if all of that doesn't solve the problem, because it's always something small that i forget to do, when Illustrator is giving me printing problems.

Premiere elements 12 is cutting off images after finalizing project

I have recently finished a music video project and after finalizing the project and saving it down as a wmv. file, I have played back the video and parts have been cut off. I use a lot of green screen keying in my videos and at times the tops of peoples head will be cut off and images aren't aligned the way I had them within the editing program. This is only happening after I save & share the project, but yet everything looks fine in the editing window. No one's heads or limbs are cut off and the back ground images for the green screen effect look fine in the editing window, yet once the project is saved down the background images aren't stretched across the screen like they appeared in the editing program. I don't understand why this is happening and I'm seeking help before I resort to modifying any of my work again.
Case & point, why is what I see in the editing window different from what I see after the project is finalized? PLEASE HELP!!

screamindemon
What computer operating system is your Premiere Elements 12 running on? For now I will assume Windows 7, 8, or 8.1 64 bit in case I need to mention specifics.
What you describe is probably a mismatch of project settings importing and exports. So let us start with details.
What have you or the project set automatically for the project preset? (See Edit Menu/Project Settings/General and the readings for Editing Mode, Timebase, Frame Size, and Pixel Aspect Ratio even if they appear to be grayed out.)
What are the properties of what you are putting on the project's Timeline? Do the properties of the source media match the details of the project preset that you are using.
Then the most likely cause of the problem...your export settings.
From what you wrote, you are probably using
Publish+Share
Computer
Windows Media
Now the important part, what are you selecting for "Presets" and what are your settings under the Advanced Button/Video Tab and Audio Tab of the preset selected?
The answers will be in your details.
If you have questions about what is written or need clarification on it, please do not hesitate to ask. But, the answers are need for all of the above.
Thank you.
ATR

White line cutting off image in Ken Burns effect

Hi I have multiple layers in a clip-- White background, photo with some white background as well, some text. When I apply Ken Burns to get a little movement, all of the sudden a white bar appears up top and cuts off part of the photo. Where is this coming from? There's really nothing above the photo that I can see in the layering of all this? Thoughts?
Thanks so much!
ClemKins

Are you editing inside a clip timeline, or on a project? What are you applying the Ken Burns effect to? The whole clip, the photo?
Please post a screenshot of your timeline, viewer and inspector, to see exactly what you are trying.

How to develop a solution for news web part to not cut off words when displayed on a page?

Hello,
I am not sure where to turn to, but I have a web part on a SharePoint 2013 page where it displays news and announcement items. 4 lines of text are displayed, but words are cut off. For example:
The day was grey and stormy in the middl...
Read More
Is there a way to not have SharePoint cut off words and display the whole word before it adds the ... and the end of text?
Is there a third party web part that does a better job at displaying news?
Thanks,
Paul
Paul

i think your code is such way it hides remaining text anyways try these links as reference:
http://veroniquepalmer.com/2011/04/23/announcements-gotchas-on-sharepoint-2010-site-pages/
http://sharepoint.stackexchange.com/questions/20959/sharepoint-2010-set-character-limit-of-news-webpart-without-sp-designer
http://sharepointsolutions.blogspot.in/2009/02/expanding-size-of-announcements-web.html
http://www.edugeek.net/forums/virtual-learning-platforms/31539-customizing-announcements-summary-view-sharepoint.html
Please mark as answer if you find it useful else vote for it if it is close to answer..happy sharepointing

Dynamic Tab Shell Cutting Off Images and Text

I'm using the Dynamic Tab Shell on a page and trying to get a few image links and output text displaying properly in the Global Toolbar. I want the image links on the left side of the toolbar and the output text on the right side. The problem is the images are being cut off and the text is wrapping into a small space and is not fully readable. The images are 32x32 pixels. Should I resize them to something smaller? I tried using smaller images previously, but it seems to just push them down and still cut them off.
The full output text should be "Logged in as: username", but it's forcing it into a small space and cutting off the username like this:
Logged
in as:
username (this line is not visible in the toolbar)
Here is my code. Any help is appreciated.
            <af:pageTemplate viewId="/oracle/ui/pattern/dynamicShell/dynamicTabShell.jspx" value="#{bindings.ptb1}"
                             id="pt1">
                    <f:facet name="globalToolbar">
                       <af:panelGroupLayout id="pgl5" layout="horizontal" valign="top">
                         <af:toolbar flex="1" stretchId="stretch1" id="tb1">
                           <af:group id="grp1">
                              <af:commandImageLink text="" actionListener="#{tabmanagement.dashboardSelected}" id="cil1" icon="/images/AsIconDashboard.png" partialSubmit="true"/>
                              <af:commandImageLink text="" actionListener="#{tabmanagement.toggleSelected}" id="cil2" icon="/images/AsIconToggle.png" partialSubmit="true"/>
                            </af:group>
                            <af:spacer id="stretch1" width="10" height="35" clientComponent="true"/>
                            <af:outputText id="loggedInAsOT" value="#{tabmanagement.loggedInAsText}"/>
                         </af:toolbar>
                      </af:panelGroupLayout>
                    </f:facet>

Moving the output text from the globalToolbar facet into the globalSearch facet fixed the problems and gave me the intended results:
               <f:facet name="globalToolbar">
                  <af:panelGroupLayout id="pgl5" layout="horizontal" valign="top">
                     <af:toolbar id="tb1">
                        <af:group id="grp1">
                           <af:commandImageLink text="" actionListener="#{tabmanagement.dashboardSelected}" id="cil1"
                                                icon="/images/AsIconDashboard.png" partialSubmit="true"/>
                           <af:commandImageLink text="" actionListener="#{tabmanagement.toggleSelected}" id="cil2"
                                                icon="/images/AsIconToggle.png" partialSubmit="true"/>
                        </af:group>
                     </af:toolbar>
                  </af:panelGroupLayout>
               </f:facet>
               <f:facet name="globalSearch">
                  <af:outputText id="loggedInAsOT" value="#{tabmanagement.loggedInAsText}"/>
               </f:facet>

My iPhone is severely messed up. I think my mophie has caused a short in my phone because without it on there my phone cuts off even when my phone was at 100%. Idk what else I can do

My iPhone is severely messed up. I believe my mophie external battery has caused a short in my phone because if I take it off and even sometimes when it is still on, my phone likes to cut off and then try to cut on but cant cut on. I have had this phone since february or so and it is becoming very frustrating. Idk what I can do

tapia1988 wrote:
... My question is can they erase all the information from my phone to the point of using it although i have not disconnected it from sprint????
Yes.
Unless you are certain that it was stolen, don't overlook the fact it may have been turned in to a lost and found.

Safari 6.02 cuts off headers when printing

My header and footer get chopped when printing via Safari under Mountain Lion. I do not remember having this problem under Snow Leopard so this may be a Mountain Lion or Safari 6.x issue here.

No I don't. I am printing a lot of work files and it seems to scale the width of the document to 100%, which makes the the top edge cut off. I have actually decided to use the adobe reader plug-in in safari, and it looks like everything works fine. I was just wandering if there is anything that I can do in safari without using the plug-in. Thank You!

Losing my images when I upload to the FTP site

I've been updating pages in Dreamweaver CS3 and they look
fine when I preview them in various browsers. However, when I go to
upload them to the FTP site, I lose the images (a box appears with
an "x" in it). I can't figure out what I am doing wrong.
Can anyone help me?

Post a link to one of your pages, please....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Lila37" <[email protected]> wrote in
message
news:gah076$7lq$[email protected]..
> I've been updating pages in Dreamweaver CS3 and they
look fine when I
> preview
> them in various browsers. However, when I go to upload
them to the FTP
> site, I
> lose the images (a box appears with an "x" in it). I
can't figure out
> what I
> am doing wrong.
>
> Can anyone help me?
>

Slideshow cuts off images when site uploaded

Similar Messages

Maybe you are looking for