Slideshow Export ends with long black phase

I am exporting a large slideshow from iphoto. The export goes through all the pictures and movies, but after the last one the progress bar is still only halfway completed and from then on shows a black thumbnail picture (or several ongoing) and hardly moves anymore.
Not sure if the export will eventually finish. This did not happen with small slideshow exports that I tested with 4-20 pictures.
Anybody had the same problem? Any suggestions where this is coming from and how to avoid it?

Thanks, I will try that but I've had some bad experiences with imovie, the pictures don't seem to render right and you cant see the expressions on peoples faces.
I can't be the only person who has tried to sync music and pics in iphoto, and yet there is no one else on the discussions commenting on it. I've even read a tutorial about adding a commentary to your photos in iphotos by working out the timing, so it must be possible. Someone put me out of my misery please!

Similar Messages

Client Export ended with errors

Hi All,
It is very urgent. Please help!
I'm doing client export a Prod client and will import to a Dev client. I run the export SCC8 in background. The export job (SAP_ALL profile) was completed successfully in SM37. However in SCC3, I received error "End with errors". I drilled down the log then I see the following errors.
Command file......................... PRDKT00024
Customizing data .....................X
With application data................ X
Initialize and recreate......... X
Change documents are not copied
Transport control program tp ended with error code 0008
Transport program tp could not be started (RC= 0)
Program ended with error or warning, return code: F
Runtime (seconds)         :          9,222
End of processing: 21:04:45
Could you please let me know if these are errors or they are okay to ignore? The export created a transport file PRDKT00024 about 3GB. I don't see the KX00024 and KO00024.
Is this a successfully export or not? please advise.
thanks,
bichloan

In Al11 what does DIR_TRANS pointing to?
Make sure you have enough space there as it will export the 2 files to the transport directory.
Have you tried Remote Client Copy.
Thanks
Adil

PS CC autom. generate function for layers (LAYER.PNG) export file with a black Background!

I generate my ps layers as PNG files (LAYER.png), but since a while it just export my layers with a black (.png) or white (.png24) background. Why? I can't find a solution.. it is so random!
I'm thankfull for any help!

Ok, I forgott to say that I use the PNG's in After Effects. Now I know that all Versions of AE can't show small PNGs with transparency backgrounds! Just After Effects CC can do this.
So this are the two solutions:
1. Buy After Effect CC
2. Work with a batch script, to re-saves the PNGs after the export.

TRANSPORT REQUEST CANNOT BE EXPORTED ENDED WITH RC 0208

Hi I am trying to release my request AEDK902592 of DEVELOPMENT server through se10. Now my problem is that the child request number
AEDK902593 is getting released whereas the parent request
AEDK902592 is nor released giving the following error: test call of transport control program (tp) ended with return code 0208.Can anyone please tell what can be wrong.Or is something wrong with the
request a it is also showing:your transport request could not be
exported as all requirement is not fulfilled.
Please help as it is very urgent.Helpful suggestion will be duly
rewarded.
Regards,
vicky

Dear vicky
Longtime back, one of my friends also had faced similar problem and at that time, I was told that by applying the sapnotes 216703, the problem has been rectified. I am not sure, whether this will help you.
If not, you can also try with the following which I got from my ABAB colleague [I dont have technical knowledge )]
1. Check the permission/owner on the directory /usr/sap/trans/buffer (or DIR_TRANS/buffer)
2. Do a cd on that directory and then view the file SID. Check for multiple entries (as in the row entries are the same in all aspects) and any sign of corruption.
Check this file first with the command tp showbuffer <file name>
If the command also outputs the above error message, look for the incorrect line in the buffer file after the last displayed transport request.
Generate a backup copy of the buffer file and then correct the incorrect format of the line with a text editor. You must use the editor 'sappad' on Windows platforms.
If the command 'showbuffer' does not generate an error message, you must search for the incorrect line manually. To help you, you can generate a backup copy of the file and then use the command 'cleanbuffer' to remove processed requests from the buffer file.
Remember to do this first:
- Rename the old buffer file (example: System XYZ buffer):
mv /usr/sap/trans/buffer/XYZ /usr/sap/trans/buffer/XYZ.old
thanks
G. Lakshmipathi

Slideshow export plugin with HTML5?

Hello, is there available any plugin that would create simple HTML5 based slideshows? I guess while the appearance is a slideshow it would work as web gallery plugin.
Fade effect would be nice as transition, it should autoplay (with manual override), have some text fields for information. Comment feature would also be nice but I think that could be a separate snippet as I would not need a comment per image feature, plain common single comment area for the whole show would be enough. (Any pointers for simple comment tool?)
TIA.

iMac computer. Yosemite.

CS4 6.0 pdf export bug with long tables and graphics

I discovered this bug in the CS4 trial, can anyone confirm that:
1. start a new document having at least two pages
2. insert one table spanning over both pages, having at least one headline
3. insert some graphic into the headline
4. right click the graphics element / anchored object / options
5. set position to user defined
6. check that the object is in the printable area of all pages
7. export this into a pdf
8. notice the graphics object is present on the first page ONLY while in the indd file it is correctly repeated on ALL pages!
I think that is a true bug, is it?

I believe that it is indeed a bug. I've seen it reported here before, if memory serves.
Dave

Restarting Client export which ended with return code 8.

Hi guys,
I have performed an client export using SCC8 and the export ended with return code 8. stating the request cannot be imported. I have fixed the errors. I would like to know how do i restart the same export instead of doing a other client export. KIndly let me know as early as possible as it is very urgent.
Naresh

Hi ,
Thanks for the reply, One of my colligue is telling no need of transport elements under the query. why means we copied (dev) one of our query and just changed the Variable to curent fiscalyear/period. now we to transport this query. My colligue is telling any way thos elements are there in old query , and telling no need to transport those. Is it correct or again we need to collect all those using elements in that query while transporting ?
we dont have access for SE03.
Thanks & Regards
Pcrao.

Transport control program tp ended with error code 0008

Hi !
I trying to realize an export of client like that :
Source Client                     400
Target System:                    ASI
Copy Type                         Client Export
Profile                           SAP_RECO
Status                            Ended with Errors
User                              ST01051
Start on                          17.06.2009 / 17:41:00
Last Entry on                     18.06.2009 / 00:20:40
Transport Requests
- Client-Specific                 ASIKT00028
- Texts                           ASIKX00028
The export ended with this error :
Transport control program tp ended with error code 0008
Error when exporting request ASIKT00028 00:20:39
Program ended with error or warning, return code: F
What happen ?
If somebody can help me to solve this problem ?
Regards,
Johan

hai johan ,
of the return code is 008 then it is error,
what have u transported to target just chekc the log an du might find the error ,
just click the expand button of the error and u will get the detials what errror occured
may be some objects might be inactive just chekc once
m.a

When exporting a video slideshow to my desktop it will start and then just end with no progress so I have to cancel it.

When exporting a video slideshow to my desktop it will start and then just end with no progress so I have to close it out. I get no warnings or any explanations. Any ideas? I am running Windows 7. No problem viewing it in LR. Thanks

Found out LR wasn't stopping but slowed way down. For 19 pictures, no video and no sound it took over 6 Hrs to export. Does anyone have any ideas to help this? Thank You.

Long black wire from ant socket in rear i want to know where the other end goes in front S5710f PC

I have a long black wire that is connected in the rear to a part that serves the antenna. The other end goes to the front of the PC. It came off when I removed the hard drive and dvd player. I have the pavilion s5710f.

That model did not ship with a Wi-Fi card according to HP's specs.
If there were to be such a card, the antenna wire snaps onto the card's brass fitting. The wire is an antenna.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

After creating a new slideshow I export it with the setting HD 1080p it is then saved as a .mov i then create a dvd in idvd and the quality is not as good as the original photo's when viewed on the monitor or a TV, am i doing something wrong?

After creating a new slideshow I export it with the setting HD 1080p it is then saved as a .mov i then create a dvd in idvd and the quality is not as good as the original photo's when viewed on the monitor or a TV, am i doing something wrong?

DVD's are only 640 x 480 (interlaced), so yes, the quality is not nearly as good. You should probably create your .mov in DV format to best match the DVD format

Since upgrading to Mavericks, my Canon MP980 printer no longer works. I've tried deleting the printer and adding it again. the process ends with my mac saying the software is not currently available from the software update server.

Since upgrading to Mavericks, my Canon MP980 printer no longer works. I've tried deleting the printer and adding it again. I've downloaded the driver software from Canon. My Mac dropbox tells me "the selected printer software is available from Apple", but when I click to download it, the process ends with my mac saying the software is not currently available from the software update server.

Open Finder and click on Go > Go to Folder. Then type
/Library/Printers/Canon
and press Enter. This will show the BJPrinter and iJScanner folders. You could try moving or trashing this folder and then installing the driver that you downloaded from Canon again.

When I create an album and then try to watch it in slideshow, I get only a black screen with a white title. No photos come up. Also when I click on an individual photo in the album, I get a white exclamation point on a black background but no big photo.

When I create an album of photos and then open the album and try to watch it by selecting "slideshow" I get only a black screen. The white title comes up briefly but then no photos, only a black screen. Also when I go back to the album and click on a thumbnail, up comes a big white exclamation point on a black background instead of the enlarged photo. Any idea what's going on?

The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

Exporting a table with Long datatype col. name

Hello,
I need help exporting a table, One of the column is long datatype.
How can I do this without using Export Util?
Is it possible.
(If someone has a solution then PLEASE Email
me)
URGENT.
Thanks.
Pankaj Patel.

Just wanted to find out, if you already solved this problem. I have a similar issue with long column. I am trying to sql dump a table with long column that will be imported into another database(probably using sql*load), but the spooled file puts the data from the long column in separate lines 80 char long and not on a single line. I have set the long to 64000 and linesize to 32000. Wrap is on too.
null

Client export SCC8 - ended with errors

Hi All,
It is very urgent. Please help!
I'm doing client export a Prod client and will import to a Dev client. I run the export SCC8 in background. The export job (SAP_ALL profile) was completed successfully in SM37. However in SCC3, I received error "End with errors". I drilled down the log then I see the following errors.
Command file......................... PRDKT00024
Customizing data .....................X
With application data................ X
Initialize and recreate......... X
Change documents are not copied
Transport control program tp ended with error code 0008
Transport program tp could not be started (RC= 0)
Program ended with error or warning, return code: F
Runtime (seconds) : 9,222
End of processing: 21:04:45
Could you please let me know if these are errors or they are okay to ignore? The export created a transport file PRDKT00024 about 3GB. I don't see the KX00024 and KO00024.
Is this a successfully export or not? please advise.
thanks,
bichloan

Hi All,
It is very urgent. Please help!
I'm doing client export a Prod client and will import to a Dev client. I run the export SCC8 in background. The export job (SAP_ALL profile) was completed successfully in SM37. However in SCC3, I received error "End with errors". I drilled down the log then I see the following errors.
Command file......................... PRDKT00024
Customizing data .....................X
With application data................ X
Initialize and recreate......... X
Change documents are not copied
Transport control program tp ended with error code 0008
Transport program tp could not be started (RC= 0)
Program ended with error or warning, return code: F
Runtime (seconds) : 9,222
End of processing: 21:04:45
Could you please let me know if these are errors or they are okay to ignore? The export created a transport file PRDKT00024 about 3GB. I don't see the KX00024 and KO00024.
Is this a successfully export or not? please advise.
thanks,
bichloan

Slideshow Export ends with long black phase

Similar Messages

Maybe you are looking for