Slideshow export video p1080 black screen only

I'm trying to export video, a 60 min slideshow, all tiff's, all previewed, no music but all I get is a 3.6 GB large mp4 file which is black, from start to end.
Does anyone has an idea what the problem could be?
Thanks for your help
Rolf

I'm trying to use Quicktime X, I'm on Mac. I exported a smaller version of the video (960x540) which worked but quality is by far not what I need.
I have to try p780 later to see if that works, but 1080p does not give me anything but black..
Thanks
Rolf

Similar Messages

Slideshow export - video options grayed out

The slideshow export video options are grayed out. When the slideshow is exported it is sound only, no video.

Hi,
As well as Defcom's first steps he may need to do this
http://support.apple.com/kb/HT1411?viewlocale=en_US
9:59 PM Monday; July 6, 2009
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Slideshow - just shows a black screen

I set up a photo album on iWeb, but when I am visiting the site, clicking the the Play Slideshow command opens a black screen that does nothing. I did enable the slideshow option in the Inspector.
I'm using Safari.
Any suggestions???
Carl

All of your slideshows work but they take a looong time to load and I've got a very fast connection. What type of connection do you have? I'm using Safari 4b. You may just have to wait longer for all of the files to load before they display in the slideshow. For example your 1945-70 has 83 photos. Change the slides per page to 30 and each page will load much faster. The last group has 98 per page on the first page. Reduce that to around 30 and have more pages.
You have a several options:
1 - fewer photos per page.
2 - use an application like Web Site Maestro to optimize your site files and then upload them to your iDisk.
3 - move your site to a commercial hosting service like Host Excellence, GoDaddy, etc. which will vastly increase load times.
4 - move to a commercial server AND use Web Site Maestro or similar which will help make the site more accessible to those using the outdated Internet Explorer.
MobileMe is just not setup for commercial use and, as a result, is much slower than other servers.
OT
Message was edited by: Old Toad

My iPad stop working suddenly i see black screen only pressing the home? and sleep button dose not solve the problem please help?

My iPad stop working suddenly i see black screen only pressing the home and sleep button dose not solve the problem please help ?

Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Home button not working or unresponsive, fix
http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
Fixing an iPad Home Button
http://tinyurl.com/om6rd6u
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

HT201210 I updated my ipad 1 to 5.1.1 and after that, my ipad shows black screen only, no more

I updated my ipad 1 to 5.1.1 and after that, my ipad shows black screen only, no more screens, what can i do to fix it,a already tried to recover several times, on three different computers nothing happens

1. Turn off iPad
2. Connect USB cable to computer
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPad
Note: You need to be patient and repeat the above many times.

[SOLVED] Gnome 2.30 logout = black screen only

Are any of the rest of you that don't run a display manager getting a black screen only after logging out from version 2.30 of Gnome that just hit the repos?
This means no command line, no shutdown, no startx, or anything other than blackness. I have to reboot just to reach a command line again, then I can startx, or shutdown. Things worked fine before this, so I'm guessing it's a bug with one of the new packages.
If someone can confirm, I'll file a bug report.
Thanks.
Edit: added solved tag
Last edited by ozar (2010-04-01 03:06:12)

Never mind... after a couple of reboots, it started working properly again.

Adobe Flash Player don't show videos on YouTube after some point - Black Screen only

Hello. I have a problem with Flash Player on YouTube. It has crashed many, many times so I decided to open this thread for let you know about it if you don't know already.
Now, I've got no crash reports or anything but it crashes after some point. Even if it doesn't give me crash report, I understand it because YouTube videos don't run and I got only black screen. When I tried to close (click "X" at right above) Firefox, it denies to close with some click sounds. I can only close with combination of CTRL+ALT+DELETE and terminate process. After I closed Firefox and open new page, it works fine until I get the same situation.
By the way, I have laptop with these specs:
Intel Core i5 3210m
AMD Radeon 7670m + Intel HD 4000 ( with AMD Switchable Graphics called Enduro )
8 GB Ram
Windows 7 Ultimate 64 bit
I don't know what problem is causing it so I couldn't give you much information. But if you need any information, I'll try to help. Thanks in advance.
P.S: I'm sorry for the bad English.

Thanks for your reply. I totally forgot the topic, sorry.
I've solved the issue, just disabled hardware acceleration feature from Preferences menu and everything is working well now.
http://helpx.adobe.com/flash-player/kb/video-playback-issues.html

Exporting "Youtube HD" Preset results in no video just black screen

Hello,
I am a new user to Premiere CS5. I made a short video and would like to put it online in HD for youtube and vimeo. I shot the footage using a Canon DSLR t2i in HD at 24fps.
I am trying to export it in order to upload it to youtube and I tried to the preset under H.264 that is called Youtube HD. When it finished I went to watch the video and it was just a black screen but the audio worked fine. The Export video box is checked so it is not that.
I exported using Quicktime Format but the quality was a little worse. I am now trying HDTV format to see how that turns out.
Is there something I can do to make the Youtube HD preset work correctly? I imagine that's the best option for uploading to youtube.
Thanks!

Thanks for replying =)
My footage properties are all as follows (except different file names obviously for different files):
Also, I am not using the audio at all in the project, just the video.
File Path: /Users/jonirizarry/Documents/LBR/MVI_0726.MOV
Type: MPEG Movie
File Size: 1.3 GB
Image Size: 1920 x 1080
Pixel Depth: 32
Frame Rate: 23.976
Source Audio Format: 48000 Hz - compressed - Stereo
Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
Total Duration: 00:03:50:15
Average Data Rate: 5.6 MB / second
Pixel Aspect Ratio: 1.0
I am not sure what you mean by assets but if you mean what computer am I using. I am on a MacBook Pro.
Model Name: MacBook Pro
Model Identifier: MacBookPro5,3
Processor Name: Intel Core 2 Duo
Processor Speed: 2.66 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 4 GB
Bus Speed: 1.07 GHz
Just installed Adobe Premiere Pro CS5 a few days ago.

Mac Mini and Samsung 43" DLP HDTV gets Black Screen Only

Just bought a new Mac Mini with great anticipation for some large screen viewing.
After numerous attempts the Mini has yet to produce anything but a black image with the occasional red or white horizontal line on my 43" Samsung DLP TV. Not even a brief grey start up screen. Just permanently black.
Here's the kicker: I do get a great computer screen image on this 43" DLP TV in Mac OS 8.6 off my ten year old Macintosh PowerPC. (The trouble is it's a noisy older computer and has no bluetooth for wireless mouse & keyboard: and no Front Row with remote control)
I have the VGA cable connected to the "computer in" port on the back of the Samsung DLP TV .
This is with the exact same cable and connection that refuses to work with the Mini.
Earlier attempts at using the DVI port were unsuccessful so for now I am staying with what works on the older Mac.
Some other things I've tried:
-with my Mini hooked up to a 17" CRT Samsung monitor I have tried all available resolution settings at 60 Hz, reconnecting to my large screen Samsung each time, producing nothing but the black screen.
I've tried turning the TV on before the Mini and vice versa
I always check to make sure the PC connection is selected on the TV
As well, I have re-installed the OS onto the Mini to eliminate any possibility of a sofware conflict from data transferred from my Emac
After consulting an Apple technical page (article 303406) regarding Black Screen issues and Mac Mini on large screen HDTVs, I went into single user mode and changed some text as specified. That did't help either
So far I have never seen a grey startup screen at all, only a totally black screen.
Someone in a recent post here or on MacMini.com touched on impedence issues with signals into VGA or DVI ports. The Mac Mini operates on low voltage. Could there be some connection to how strong a signal it produces compared to my old PowerPC with its ATI graphics card?? And just why would that make a difference
I haven't seem my particular issue addressed in this forum or on MacMini.com
Thanks for any help
Mac Mini 1.83 Intel Core Duo 512 Mb Ram Mac OS X (10.4.7) Emac; 604e PPC with G3 Upgrade & ATI Video Card

Just finished testing the Mini remotely with the use of the Redstone software recommended by BSteely in a previous post. Fun Stuff.
I saw the Mini "desktop" on my Emac screen and could control it remotely, even though the mini was connected to the large screen Samsung.
But the "fix" did not progress from there. When I called Apple for further help they were not able to help me tweak my Mini. Apparently there was nothing to tweak.
A second level Apple technician finally told me (after a few calls to both Apple support and Samsung) that this Mac Mini is likely not capable of producing a screen image on my large screen Samsung.
He said the Mini supports "Coherent Displays up to 154 Megahertz and Non Coherent displays up to 135 Megahertz". On his recommendation I checked with Samsung (second tier) and they are not sure exactly what that means. Same here.
Samsung did reply that the "pixel clock (of this HDTV) is 74.2 Megahertz". Again, too technical for me.
The latest second tier Apple guy just told me said that my Samsung 43" DLP is probably not compatible with the output capability of my Mac Mini.
Bottom line
It's all about the output capabilities of the Mini's "Intel Extreme Graphics GMA
The Mini's video output is not upgradeable like the other mac which works with this HDTV.

AE exported video appears black in Premiere Pro

Do I have wrong settings or something in my Premiere (Pro 1.5) or more likely in export settings of my After Effects 6.5, cause after I've exported a video clip from AE and bring it to Premiere, the video turns black. I can hear it's audio though.
If I watch the same exported video with some video player, it's ok.
Thanks,
Jussi

Umm, could you please provide some format specs? You know, I can watch videos on YouTube "in some player" and it's okay, but that does not mean that these videos will have any value in Premiere. Not meaning to be snobistic here, but everyone's telepathy can only go so far and in my case it seems I'm not tuned to your brainwave length....
Mylenium

YouTube videos a black screen an no play button since installing Flash10. Firefox 3.6.14 and OS X.4.11 What to do?

Hi
Re Mac intel... Firefox updated to 3.6.14 and advised Flash 10 be installed. I did this and now on YouTube videos all I see is a black screen with no play or pause button. System is OS X10.4.11
Do I need to uninstall Firefox and re load an earlier version and an earlier version of Flash etc... will I lose my bookmarks and firebug? If so not worth it.
Would really appreciate help so sad not to be able to view any YouTube. Many thanks, Clare

Hi again - since writing the above I have posted on Adobe>Webplayer>Flash forum the following request and will post on here if I receive a reply that works:
Firefox updated to 3.6.14 and then advised Flash 10 be installed. I did this and now on YouTube videos all I see is a black screen with no play or pause button. System is OS X10.4.11 Have now followed Adobe instructions to Uninstall Flash player on system and then Install Flash 10. But still at YouTube Safari says Flash 10 is needed and in FF shows a black box only. I use Intego virus barrier but this has never blocked an update before. Flash is enabled in Firefox and Safari.
eldnolb at Adobe forum advised: Go to this site and right click on the Flash logo, Settings, Display Settings. UNcheck the hardware acceleration.
http://www.adobe.com/software/flash/about/
But when I go to this page no logo appeared for me to right click on, which again means that Flash player is not working... so I could not access Settings, Display Settings, Uncheck etc. Was advised to start a new Mac entitled thread. Clare

Lightroom 5.2 Slideshow "Export Video" over exposed

Hello, In using Lightroom 5.2 Slideshow (current version), I can export PDF and Jpeg versions of the Slideshow which look good. When I add music and Export Video slideshow the exposure goes up by +1.5 to +2. Help!
I have gone to "Preferences", "Presets", "Store presets with this catalog" (checked)
Thanks,
Mike84

The video on SMugMug looks very good on my Windows 7 system using both IE 9 and FireFox 24, so it appears there is nothing wrong with the LR video. Check your Grapics adapter's control panel. I'm running an Nvidia graphics card- Right click on a blank area of the Desktop and select Nvidia Control panel, or whatever graphics adapter panel you have.
Try setting the 'Video' section of your panel back to 'Restore Defaults,' or do it manually. In addition, there is a know issue with Nvidia drivers that causes black levels to look washed-out. If using an Nvida card folow the settings shown in the screenshot below and set the 'Dynamic Range' to 'Full (0-255)' and NOT 'Limited (16-235).' Make sure the Conrol panel Video section Gamma and Color settings are at their default settings.
If still having this issue download the latest driver from Nvidia's or AMD's website and install it. If still having the issue provide your OS version, graphics adapter model, and graphics driver version.
Click on image to see full-size

Why does my exported video have black edges?

Hi Everyone,
Somehow my video must be changing frame sizes or something to that extent. I have thin black edges on my exported video. I have checked carefully and my output and source settings match to my visual knowledge. Please help.
Mike Diaz

Mark,
I can show you the player in Premier but I wouldn't know how to export the encoded clip back into Premiere LOL. I'm a total newbie at CS6. And I don't know how to upload a clip, I don't even know how to screen shot it through my notebook. I tried print screen and I get nothing so I am going through my mobile device to upload everything. Thank you guys for your patience and help.

Video.app black screen

64 GIG 3G
========
Watching a video on the train and the 3G cellular connection is lost (through the tunnels). A message appears with "Dismiss" or "Settings" which interrupts the video so hit "Settings" to turn airplane mode on so avoid the constant connection lost message. Go back to the video and nothing but a black screen with no controls or ability to do anything apart from hit the home button.
A hard reset, quitting the app, or any other trick does nothing. The app is still a black screen.
Any ideas apart from a full restore?

Sorry, I am a WiFi only iPad owner. I have no clue how to get the message to stop. But now I do understand that the comment was made so you could describe what was going on at the time.
If my first suggestion doesn't work, another thing you can try is to double tap the home button and scroll the the ro the iPod control and hit the resume play arrow. Then go back to the videos app and see if it works.
Ironically and oddly enough, a third "fix" that I've read about involves downloading a free podcast, or playing a podcast in the iPod app for a short time, quit and then go back to the videos app and try again!

HT204291 Video is black screen

I am getting a black screen when I AirPlay a home video captured by ipad3.
Air playing other video sources like YouTube works fine as does still frame pictures.
IOS is latest version and no updates available.
Suggestions?

seems to be a problem with ClicktoFlash. I went back to 1.5.3. The one available on the Apple extensions page causes the problem.

Slideshow export video p1080 black screen only

Similar Messages

Maybe you are looking for