Slideshow frame in elements 6

How can I get the last frame to stay on at the end, instead of going back to the beginning?

Are you seeing the return to the beginning when you do the Preview within the Photoshop Elements slide show Editor?
You should not see this go back to the beginning when you make your final slide show using the Output command.
For example, I just did a quick slide show in PSE 6. When I did the Preview it played all the slides and then did go back to a static image of the first slide. However, next I did the slide show OUTPUT command and created a WMV file. When I played the WMV slide show back uisng Windows Media Player, the slide show played throught the last slide and then faded out to black - it did NOT return to the beginning.

Similar Messages

Adding Music to a slideshow in Premiere Elements 4

I am new to media software. I have some experience with editing photos in Photoshop Elements 4. Since that program was unable to make slideshows that played on a TV, I purchased the new bundle with Photoshop Elements 6 and Premiere Elements 4. I have been having great difficulty finding good instructions on how to do things in these programs. Their online manuals and Help section seem to be for people who are already familiar with these kinds of programs. So, I am here, to try to get some help.
I made a slideshow in Photoshop Elements 6 and sent it to Premiere Elements 4. I was able to burn it and it plays on our TV. Now I want to add music to it. I first looked at the slideshow in Premiere Elements 4 but could not figure out how to add the music using that program.
Therefore, I went back to the slideshow I created in Photoshop Elements 6 and have been trying to add music in that program with the idea of sending it to Premiere Elements 4 again when it is time to burn. I need to add Mulitiple Music Selections to the slideshow. I am trying to coordinate different music with the different cities we visited in Alaska. This has been a bit difficult for me to do. I am getting there, but it is not effecient. I posted on the Photoshop Elements Forum and it was suggested I try this forum. Someone thought it might be easier to do using Premiere Elements 4. If there is a link somewhere with directions on how to add the music in either program, I would be most grateful for that information. I am looking for instructions on how to add MULTIPLE music selections to ONE slideshow. I found the instructions for adding one music selection, and I understand that. I just need to take it further. Thank you for any help you can provide.

Mary,
I create all of my slideshows in Premiere Pro, so I am learning a lot about the interaction between PSE and PE from your thread. Were it not for Barbs instructions to Break Apart the slide show from PSE, I would never have thought of that. As you say, learn something new everyday. I also only have the full Photoshop, not PS Elements, so I do not know what PSE offers. See, Im learning things right there.
Now, lets see if I can give you an easy way to do the Fade-out of your Audio, and not confuse you. There are several ways to do this, but I like to use the Audio Mixer. Maybe its because it looks like my mixing console from my analog days and Im comfortable with the pot (potentiometer) control that is displayed.
You have now followed Barbs instructions to Break Apart the slide show. You are now in the Timeline view and have expanded it horizontally and maybe the two main Track (Audio, where your music is, and Video) vertically, so that you can see your Clips (your slides). Go to the menu at the top of the Workspace and click Window. This will give you a drop-down menu. About 7/8 of the way down, click on Audio Mixer. This would be written as Window>Audio Mixer. This will open a new Panel, Audio Mixer. At the top of this new Panel are the names of your Audio Tracks, say Audio 1, Audio 2, Narration and Music. Because you could have your music on about any of these, youll need to match up its location (left side of the Timeline will give you the exact Track name) with the names of the various Tracks in the Audio Mixer. Once you have that name match, the fun begins.
I like to place the CTI (the Current Time Indicator) a bit ahead of where I will want to make my change. This gives me some time to get ready. Lets say that your music IS on the Music Track. Looking down below that label in the Audio Mixer, you can see a round knob marked Balance. Look down below that and youll see a vertical window marked Level, with a chart just to the right of it. There are three elements to that chart: a black slot line, and small horizontal rectangle with a horizontal line in it and then numbers with +s and -s. That horizontal rectangle is the pot (potentiometer) handle and is what we will be using. It is probably set a 0, but it might reflect a sound level set previously, maybe in PSE. You might want to jot down where it is set right now, in case we need to go back.
Now its time to get creative. Position the Audio Mixer where you can see it and also the Timeline. Note that you can change the size of the Audio Mixer, so that it only shows the Audio Track that you are working on, if needed. Place your mouses cursor over the pot handle (that little horizontal bar) click and hold for a second. With your other hand, hit the Spacebar to start the play of your Timeline. The CTI will begin moving to the right and youll hear the Audio Track and see the images in the Monitor. While still clicking and holding on the pot, get ready. When you are approaching where you want your Fade-out to begin, slowly drag the pot down to the very bottom. The idea is to do this at a speed that will get you to the - ∞ point, just as you come to the end of your slide.
What this does is automatically add Keyframes to the Audio Track (the one where your music is), that go from the set level to silent. This is just how we used to do it pre-digital, except we had our finger on the pot and actually slid a mechanical/electronic device. If you look closely at your Audio Track, youll also see a bunch of little circles on the yellow line. These are the Keyframes. The beauty of doing it this way, is that you can vary the speed of the Fade-out. You can start slowly, then increase the Velocity of the Fade. [Note: in Premiere Pros Effects Panel, you can manipulate this Velocity to your hearts content. I do not believe that PE allows as much control there.]
There are two other ways to accomplish the same thing. One is to manually add a Keyframe, at the CTI (accomplished by clicking on the little diamond on the left side of the Audio Track in the Timeline), on the Audio Track, where you wish the Fade-out to start. This basically holds the Level before that point to what it was set to. Then you go to the end of that piece of music. Lets say that it ends exactly where your slide ends (on the Video Track). I find that point easily by hitting Page Down, then the <- key (left cursor key). Page Down takes you to the next cut, or Clip, and the <- takes you back to the last frame. Here youd manually add another Keyframe. Drag down on this second Keyframe to drop the Audio level to - ∞ like above.
The other way to do this is to add an Audio Transition to the end of your music. I use Constant Power from the Audio Transitions pre-sets for this. One can alter the length of these Transitions to fit the time desired for the Fade-out. When it comes to steps involved, this might be the easiest method, but I like the control of Keyframes, and like to use the Audio Mixer to achieve the effect that I am listening for.
As with most Adobe programs, there are several ways to get what you desire. These methods usually only differ by degrees for control. Some are almost one click and drag solutions, other require user input. The beauty is that the simple way will often get what you want, while the latter will allow much more control.
Personally, Id try all three, just to see which one is easier for you and which one allows you the exact effect that you want.
I hope that the forum formatting will bring in the characters that I have used, so you can see them. If you get a bunch of little solid black blocks, it did not. That is why I also added the annotations to tell you what the symbol is.
Good luck,
Hunt

Slideshow in Photoshop Elements 9 keeps crashing when I try to output it to movie file (wmv)

Made a slideshow using Photoshop Elements 9 that keeps crashing when I try to output it to movie file (wmv).
This message appear: Microsoft Visual C++ Runtime Error
This is totally new to me as I have made a few slidshows before and saved them into wmv-files without any problem.I tried to open the file and renew it "save as" and did the whole procedure over again but it still crasches. There is no video in the slideshow and all pics are .jpg and to summarize it - 5 days of work is nearly gone if this doesent convert into a wmv-file..... Pls advise any suggestion what to try here.
Best regards
Eric
/Sweden

Your crash has nothing to do with the junk filter. It looks more like a corrupt preferences file. If you're curious, you may check the validity of that file issuing the following command in Terminal:
plutil ~/Library/Preferences/com.apple.mail.plistWhat does it say? Now, try this:
1. Quit Mail.
2. Make a backup copy of the HOME/Library/Mail folder, just in case something goes wrong. You can do this in the Finder by dragging the folder to the Desktop while holding the Option (Alt) key down, for example. This is where all your mail is stored.
3. In the Finder, go to HOME/Library/Preferences/. Locate the file com.apple.mail.plist and move it to the Desktop (to be deleted if this fixes the problem).
You'll have to set up your accounts from scratch all over again. If given the option to import existing mailboxes or something like that, don't. Just enter the account information and Mail will automagically rediscover the data in HOME/Library/Mail/ when done.
You'll also have to re-configure most of your settings in Mail > Preferences. The first thing you should do is go to Preferences > Viewing and disable "Display remote images in HTML messages" if it's enabled.

How can I put captions in a pdf slideshow in Photoshop Elements 13?

How can I put captions in a pdf slideshow in Photoshop Elements 13?

Tags are independent of PDF page content. Removing/deleting a page or page(s) does not remove anything in the PDF's structure tree.
As Full Check is looking at the structure tree the report reflects what is present there.
In the Tags panel walk the structure tree to locate the Table tags. Delete these.
Be well...

I made a DVD slideshow with premiere elements 4, in 2008. How can I retrieve the photos?

I made a DVD slideshow with premiere elements 4, in 2008. How can I retrieve the photos?

Install the excellent 'Search Everything' utility and enter 'extreme' as a search term. Note that when you first run 'Everything' it takes time to index your drive(s). After that though it is a nearly instantaneous start.
Cheers,
Neale
Insanity is hereditary, you get it from your children

Cannot create slideshow in Premiere Elements 8

I just installed and am trying to use Premiere Elements 8. I have been racking my brain for the last two hours trying to figure out how to create a slide show. I do not have a create button anywhere. I jumped from Elements 1.0 to 8. I am ready to return 8 and go back to 1 if I cannot figure this out.
Where do I find the slideshow dialog box?
Can someone please help?????
Thanks.

Oh come on, Eric! You're not really going to return the program just because you couldn't figure out how to use it, are you?
I"m just teasing you. The program can be a bit intimidating at first. That's why I spend most of my day showing people how to use it.
Actually, there are at least four ways to build a slideshow in Premiere Elements. I show you how to do them all in my book, "The Muvipix.com Guide to Photoshop Elements and Premiere Elements 8," if you're interested.It's available on Amazon.com and from the Muvipix store.
I don know specifically what kind of slideshow you're trying to create, so I can't give you specific instructions.
But first, before you bring any photos into Premiere Elements, be sure to resize them to 1000x750 pixels, per the FAQs to the right of this forum.
http://forums.adobe.com/thread/431851?tstart=0
Then use Get Media/From Files and Folders to get the photos into your Project panel (also under the Organize tab.)
Once you've got all of your photos gathered in your Project media panel, select them all and right-click -- and select Create Slideshow.
As I say, there are a number of other ways to do it, but this is the easiest. There is also an option for creating a slideshow in Themes and there's a slideshow creator built into the Organizer.
But that should get you started.
Meantime, why not check out my free Basic Training with Premiere Elements tutorials on the Muvipix site?

Can''t import MP3 to slideshow in Premiere Elements 12

I get an error message Unable to add the audio file. The selected file cannot be played your system does not have the required compressor/ decompressor or codec is not installed.

What computer operating system is your Premiere Elements 12 running on? 7 ultimate home
Have you updated 12 to the 12.1 Update using the opened project's Help Menu/Update?
Elements Organizer 12.0.0.0
Core Version: 12.1 (20140303.12.1.49334)
Language Version: 12.0 (20130925.r.43436)
Current Catalog:
Catalog Name: Adobe Elements 12
Catalog Location: C:\Users\SKI\AppData\Roaming\Adobe\Elements Organizer\Catalogs\Adobe Elements 12\
Catalog Size: 136.1MB
Catalog Cache Size: 1.6GB
System:
Operating System Name: Windows 7
Operating System Version: 6.1
System Architecture: Intel CPU Family:6 Model:7 Stepping:10 with MMX, SSE Integer, SSE FP
Built-in Memory: 5.9GB
Free Memory: 1.6GB
Important Drivers / Plug-ins / Libraries:
Microsoft DirectX Version: 9.0
Apple QuickTime Version: 7.75
Adobe Reader Version: 11.0
Adobe Acrobat Version: 10.1
CD and DVD drives:
F: (ATAPI iHAS224 BUS: 2 ID: 2 Firmware: A)
G: (PLDS DVD+-RW BUS: 2 ID: 2 Firmware: DH-16A6S)
Where are you trying to import this .mp3 files...into a Premiere Elements 12/12.1 project Expert or Quick workspace or into the Elements Organizer 12 Slideshow Editor? Elements Organizer 12 Slideshow Editor
Is this music from iTunes? Is the file extension m4a or actually .mp3. mp3 From Amazon

How to add & reorganize photos in slideshow in photoshop elements 11

How do I add photos & reorganize photos in a slideshow in photoshop elements 11?

Hi, see this : http://help.adobe.com/en_US/elementsorganizer/using/WS8346320B-3F64-46f6-AE4B-9FF4D934DB36 _WIN.html

What happened to slideshow adjustments in elements 13?

what happened to slideshow adjustments in elements 13?
I can't control effects, time or movement. can't belive adobe took all these adjustments away

Adobe is starting over with a completely different slideshow in PSE 13. Unfortunately, for now it's a lot more basic than the old slide show editor.

How do I get my slideshow in Photoshop Elements to make a DVD in Premiere?

I make my slide shows in Photoshop Elements and put them into Premiere Elements to burn them to a DVD and play it on my Blu-Ray player. I have made seven of these in Photoshop Elements 8 and Premiere Elements 8. They are about 30 minutes long. Sometimes it will work and sometimes it won't. The people at Adope Photoshop Elements told me a number of different things to do - each person trying something different.
I bought Photoshop Elements 9 and Premiere Elements 9 and have a new computer. Today I burned, by hit and miss, two DVD copies of a 30 minute slide show. They are perfect.. Now I can't get a different slide show to open up in Premiere Elements. It says Serious Error. Premiere is shutting down. It does not shut down. I did get it to burn one, and it left me with pictures with black all around them.
My pictures were 8x 10 and "Crop to fit" Today I learned they were way too many pixels. and to 1,000 x 750 pixels. I made a short slideshow doing this, and still couldn't get it to open in Premiere Elements.
When I finish making a slideshow, I go to Output and Save As a movie file. When this is finished I go to Output Edit with Premere Elements. When Premiere comes up I click on Open Product. From there I'm lost on just exactly what to do. Once I get the slideshow up on Premiere Elements I have no problem going to Share and burning the DVD.
Is this a common problem having problems getting the slide show to Premiere Elements, or just a lack of knowledge? I would someone telling me in simple steps just exactly what I need to do once I get to Premiere Elements.
Photo Learner

Thank you very much!!! That did it!
JCF

Why can't I make a slideshow in Photoshop Elements 12 on a mac?

Hi,
I'm trying to make a slideshow in PSE12 on a Mac Air - but I don't see the option to do it. Can anyone tell me how to do this - it's a fairly basic function.
Thanks,
Maggie

PSE13 supports slideshow on MAC. You may download a trial of PSE13 from http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=en_gb and try slideshow creation workflow. Here's what's new in PSE13 - http://helpx.adobe.com/elements-organizer/using/whats-new.html
Thanks
Andaleeb

No slideshows, frames or albums publish!

I have been trying to solve this for six hours and have a dead arm so give up!
My site (which I have had for a few years with no probs) will no longer publish albums, slideshows or frames. When I publish and 'View Site' on iWeb it is all there. But once I look in the folder, the html files are missing the slideshows etc - but the photos are all still in the media folder.
When trying to view the html files in my FTP the message says "A valid URL could not be created for the file you are attempting to preview. Make sure the file is in your site root or enter the URL manually." However, this is entered correctly within iWeb and has had no issues before.
I have also tried to upload to mobileme and it said that there was an error and could not upload. Is it possible this site could be corrupted? I have nine other sites on the same library which appear to upload Ok!
I can remember when I upgraded this site with iWeb'08 that there was an issue with a .js file within Script, but I have replaced the whole Script folder and still no joy!
The URL I should first direct you to is as I have no set up a temporary diversion from the first page. Photos on their own seem fine, but nothing more exciting
http://www.karlagowlett.co.uk/personal-projects/personal-projects.html
ANY light on this will be fab! I am off to sleep...

If you're publishing to MobileMe it probably was a server problem that finally got fixed. We've seen a lot of problems similar to this, i.e. web sites suddenly missing files after a publication and then suddenly fixing itself some time later.
Like your album/slideshows. What did you use for them.
OT

Photo doesn't fit slideshow frame

Is there a way within iPhoto '08 to make a photo fit properly on the screen when creating a slideshow? I have a series of photos and "full frame" photos fit fine, but photos shot vertically are cut off at the top of the screen.

tarkin:
In the slideshow settings deselect the option to "Scale photos to fill screen. That should fit the portrait photos to the monitor's height. It may, however, cause the landscape photos to have a bar at the left and and right depending on their size ratio in comparison to the monitor's ratio.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Edited slideshow in Premier Elements

I created a slideshow in PSE 9, and now I want to edit it and burn a DVD in Premier Elements, but I can't figure out how to transfer/import the slide show into Premier elements. Appreciate any help.

You're more likely to get the answer in the Premiere Elements forum:
http://forums.adobe.com/community/premiere_elements
Ken

How to turn off application frame photoshop elements 12 on OSX?

I just upgraded from PS elements 8 to 12 and can't find the "shut off application frame" option? Photoshop Elements 12 OSX

I didn’t think that was an option in PSE12. Do you mean the ability to see through the application to the desktop? It used to be in older versions under the top menu:
Window >> Application Frame
Or are you referring to floating windows/cascading? You change the settings in:
Adobe Photoshop Elements Editor >> Preferences >> General

Slideshow frame in elements 6

Similar Messages

Maybe you are looking for