Slideshow in adobe premier elements 7.0

I recently installed this program & created a slideshow on what I will call PC1. Something happened and it would no longer open the slideshow editor. I backed up the catalog & was able to complete the slideshow on PC2. I have now uninstalled & reinstalled adobe premier elements 7.0 twice on PC1 trying to get the slideshow editor to start working. I have cleared all the temp files. I am able to see the slideshow as I backed up the catalog on PC2 and restored it on PC1. Any thoughts on how I can get the Editor working on PC1 again? It is a faster machine & I really need to use it to burn a DVD of the project. Many thanks smanson

Welcome to the forum.
First, give us a complete description of the two systems. The more details the better: OS, CPU, RAM, Video card and hard drives.
Next, tell us about this slide show, expecially the number, size and format of the slides. The more, the better.
Have you sized the images to no more than 1000x750?
Have you looked over the FAQ's in this forum? There are some great ideas on optimizing one's system there.
These steps will help others see possible issues, so that they can help you better.
Good luck,
Hunt

Similar Messages

Adobe premier elements 11 downloaded but will not install

adobe premier elements 11 downloaded but will not install?

Hunt
What you just wrote may have revealed the Photoshop Elements Premiere Elements integration consideration. If you have Premiere Elements 11, you need Photoshop Elements 11 for the integration between the programs to produce the DVD version of the Photoshop Elements Slideshow.
All along I was picturing Meyerswalter already in Premiere Elements 11/Publish+Share/Disc/DVD and being told to install Premiere Elements to get the burn to disc accomplished.
But, if Meyerswalter is using Premiere Elements 11 and a non integrated version of Photoshop Elements for this matter, that could very well fit.
So, Meyeswalter, so that we can dispel those thoughts
a. What versions of Photoshop Elements are you using with Premiere Elements 11? And, are you in the Photoshop Elements Slideslide Show Editor using the Output of Burn to Disc DVD or Edit with Premiere Elements Editor and getting the load software message somewhere along the line?
b. To prove this point, if you have not already, what happens if you take Photoshop Elements out of the equation. Import some media into Premiere Elements 11 and try to burn to disc from there Publish+Share/Disc/DVD?
If that is the core of the issue, I will post a list of Photoshop Elements Premiere Elements integrated combos as a guideline for you.
If this is the core of the issue, you could always keep the non Photoshop Elements 11 version that you have, output the slideshow to a wmv file sized for DVD and then import that into Premiere Elements 11 via its Add Media. More on that later if necessary since right now I am speculating on an explanation for what you are encountering.
Thanks.
ATR

Hi, After I try to load either an existing or new project in Adobe Premier Elements 9 I just get a blank grey screen with none of the timeline, etc. boxes on view. This has suddenly happened, one day OK next not! At the top of the screen I get the normal

Hi, After I try to load either an existing or new project in Adobe Premier Elements 9 I just get a blank grey screen with none of the timeline, etc. boxes on view. This has suddenly happened, one day OK next not! At the top of the screen I get the normal Pre icon, File, Edit, Clip, etc.
I am planning on purchasing Premier Elements 13, would it be better if I bought a new program rather than download an upgrade, just in case the upgrade doesn't load properly due to the error with my existing program?
If I the deleted Premier Elements 9 on my PC would I lose all my existing videos that were produced using Premier Elements 9 or would they be saved so that they can still be worked on in Premier Elements 13?
Does Premier Elements 13 work with Windows 7?
Thanks
Terry

Premiere Elements 13 absolutely works with Windows 7!
In fact, I'd highly recommend you download the free trial and give it a test run.
Meantime, go to Windows Update and make sure you have all of the latest Windows updates, including those that don't install automatically. Then go to the nVidia or ATI site and ensure you have the latest driver for your graphics card, and go to Apple.com and ensure you have the latest version of Quicktime, per the program's requirements.

Sorry, a serious error has occurred that requires Adobe Premier Elements to shut down.

I have Adobe Premier Elements 7. When I launch the application then try to begin using it an error is presented which advises Sorry, a serious error has occurred that requires Adobe Premier Elements to shut down. We will attempt to save your current project. When I click OK the program shuts down. I have tried fixes I have found on the Forum. I have also uninstalled and reinstalled the program.

From the Premiere Elements Information FAQ http://forums.adobe.com/thread/1042180
•You MUST use an account with Administrator Privileges to run Premiere Elements
•(Doing Run as Administrator http://forums.adobe.com/thread/969395 [says Encore and also for "All" versions of Premiere] will sometimes fix "odd" errors)
•What version of Premiere Elements? Include the minor version number (e.g., Premiere Elements 12 with the 12.0.1 update).
•What operating system? This should include specific minor version numbers, like "Mac OSX v10.9.4"---not just "Mac"
•Has this ever worked before? If so, do you recall any changes you made to Premiere Elements, such as adding Plug-ins, brushes, etc.? Did you make any changes to your system, such as updating hardware, printers or drivers; or installing/uninstalling any programs?
•Have you installed any recent program or OS updates? (If not, you should. They fix a lot of problems.)
•What kind(s) of image file(s)? When talking about camera raw files, include the model of camera.
•If you are getting error message(s), what is the full text of the error message(s)?
•What were you doing when the problem occurred?
•What other software are you running?
•Tell us about your computer hardware. How much RAM is installed? How much free space is on your system (C:) drive?
•How many and what speed are your hard drive(s)... ie 5400rpm or 7200rpm or?
And some other questions...
•What are you editing, and does your video have a red line over it BEFORE you do any work?
•Which version of Quicktime do you have installed?
•What is your exact brand/model graphics adapter (ATI or nVidia or ???)
•What is your exact graphics adapter driver version?
•Have you gone to the vendor web site to check for a newer driver?
•For Windows, do NOT rely on Windows Update to have current driver information
•-you need to go direct to the vendor web site and check updates for yourself
•ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
•nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us

I want to create a HD disc with my Adobe Premier Elements but I am getting low resolution. When I go to share the DVD to disc the form only offers 8pixels at the bottom. How do I burn this DVD in HD with higher number of pixels?

I want to create a HD disc with my Adobe Premier Elements but I am getting low resolution. When I go to share the DVD to disc the form only offers 8pixels at the bottom. How do I burn this DVD in HD with higher number of pixels? I have read other forums on burning HD DVD's but I do not see the option to turn the 8 pi into 40 pi the one forum recommended. I want my DVD to be HD so I may sell these videos online for my business. I can't sell them the low quality they are burning now. Hopefully you can help me. Thanks.

desalvom
Thank you for your reply.
You cannot burn your high resolution video that you can view on your computer to an AVCHD on DVD disc
that will replay through a regular DVD player. But players are marketed under a variety of names with
different support opportunities. One manufacturer may call its product MultiMedia Player, media player, Blu-ray player,
etc.The bottom line is the specifications for each of the players that are candidates for the playback of
the AVCHD format on DVD disc or the format of interest.
If you upload your HD (1920 x 1080) video to YouTube, YouTube converts the video to flash format, but it goes up as the HD video.
But, beware. Look at the YouTube viewing setting when your uploaded video is playing back. The YouTube default is not
HD. It might be 360p, 480p. If you have a 1080p video, then before the YouTube playback, you should be looking
at the video with the YouTube 1080p HD setting for best viewing. That is a YouTube matter.
Best results depend on you
a. setting up the Premiere Elements project preset to match the properties of the source media. That means, if
you have 1080p source, you (manually) or the project (automatically) set the project preset at
NTSC
DSLR
1080p
DSLR [email protected]
or the PAL counterpart, depending on your region need.
b. if you upload your video to YouTube using the Premiere Elements feature, there is a HD preset, but you cannot
customize it.....if you need customization, then you can export your Timeline to a file...in this example
Publish+Share
Computer
AVCHD
with Presets = MP4 H.264 1920 x 1080p30 or PAL counterpart
and then customize the preset under the Advanced Button/Video Tab of that preset. In increase quality, you might look to increase
the Bitrate under Advanced Button/Video Tab settings - without compromising the file size.
Then you would upload that file to YouTube at the YouTube web site.
All of the above are factors that need looking into in order to determine the why for what you wrote
I have published a shortened advertisement video to YouTube- say 5 minutes-
and it is low quality
Often SD video upscaled to HD can present poorly. But, you are dealing with a HD workflow so that should not be introduced into the matter. The setup of the project and
the properties of the source video are important, but let us start with the above and rule in or out those considerations first.
Thank you. As always, any clarification needed, please do not hesitate to ask.
ATR

I am attempting to upgrade from Adobe Premier Elements 9 to Adobe Premier Elements 13 after using 13's trial version for a few weeks. I am unable to find where and how to do this without losing the project I have been working on. Please help?

I am attempting to upgrade from Adobe Premier Elements 9 to Adobe Premier Elements 13 after using 13's trial version for a few weeks. I am unable to find where and how to do this without losing the project I have been working on. Please help?

Vere Clarke
Premiere Elements 9.0/9.0.1 and Premiere Elements 13 are standalone products.
So, you can have both on the same computer, but only open one for your work.
The classical recommendation is to finish a project in the version in which it was created since there
is no guarantee that a project from an earlier version will open in the later version. Probably will, but
no guarantees. And, when you do explore this, do it from a copy of the earlier version project. Once you
take the earlier version project into a later version one, you cannot go back to edit the later version edited
project in the earlier version program.
If you have both versions (9 and 13) on the same computer and you have not moved, deleted, renamed any of the version 9's files/folders,
right click the saved closed Premiere Elements 9.0/9.0.1 project file, select Open With, and then Adobe Premiere Elements 13.
(Your 9.0/9.0.1 saved closed project file should be found in Libraries/Documents/Adobe/Premiere Elements/9.0.)
Please review and consider. If any questions or need clarification, please do not hesitate to let me know.
Thank you.
ATR

Upgrade to Adobe Photoshop Elements 4.0 plus Adobe Premier Elements 2.0

I currently have Adobe Photoshop Album Starter Edition 3.0
I would like to purchase the Adobe Photoshop Elements 4.0 plus Adobe Premier Elements 2.0. for more photo and video options.
I'm offered one of two options. Either buy the Full Version or the Upgraded version of Adobe Photoshop Elements 4.0 plus Adobe Premier elements 2.0.
I don't want to lose any of my videos or photos in my Adobe Photoshop Album Starter editon 3.0.
Will the Upgrade over the Full Version be sufficient?
Thanks,

The upgrade only applies if you already have a paid-for version of these programs. You cannot "upgrade" SE.
> I don't want to lose any of my videos or photos in my Adobe Photoshop Album Starter editon 3.0
That isn't an issue. Your pictures aren't "in" PSA SE, it is just cataloging what's on your disk. In any case, the catalog will be usable by PSE 4 Organizer, so all your tags etc. will be preserved.

Install Adobe Premier Elements 9 results in Windows Installer window pop up

Installed Adobe Photoshop Elements 9 fine. When installing Adobe Premier Elements 9, the installation fails during 'Configuring Windows Installer' and a pop up window appears with the title 'Windows Installer'. What do I need to do to get this software installed?

You need at least 30GB (or better, 60GB) free defragmented space for PRE9 to work. Do you have this? You may have been on the borderline during install and your first project, so when you rendered your project, or restarted the machine, (possibly Windows creating a system restore point) your free space dropped below the limit.
Can you also confirm that you didn't install any new software between the saving and opening of your project.
Here are some general points you should work through to maximise your chances of success
Install all Windows Updates.
Install latest version of Apple QuickTime (v7.6.8 at time of writing). Even if you don't use QuickTime, PRE relies heavily on it.
Install most recent graphics and sound drivers from the manufacturers web sites.
Run Disk Cleanup.
Run Defragmenter.
Temporarily disable any anti-virus realtime scanning.
And give us some information about your clip and hardware:
Use the GSpot Codec Information Utility to analyse the file and post screen image.
What project preset did you use?
Where did the clip come from?
How did you get it into PRE?
Post back here with the necessary information described here: Got a Problem? How to Get Started

Adobe Premier Elements 10 has stopped working error message/Audio issues

I'm working on a project for about a week. I almost finished it, "shared" it to my computer, and watched it thru windows media player. I thought of something else that I could add to the audio, so I went back into the project in PE10 and put small (2-3 seconds) audio clips on audio track 3. Once I did that, PE 10 would not allow me to put any audio effects on that track. (I went into some older longer projects that I have and it allowed me to put effects on any audio track).
So, I moved my short audio clips to the Narration and Soundtrack tracks. It finally highlighted the App;y button for the audio effects. Now, the problem is that I can't play or click onthe timeline or move the timeline indicator without PE10 closing out of my video. As soon as I try to do anything, it says "Adobe Premier Elements 10 has stopped working" and it closes the program.
I can open my other projects and everything seems to work fine on those and it doesn't close out, but it won't allow me to do anything in this particular project.
Again, I have been going into and out of the project for a week and all of the sudden it won't let me work on it. It's only about a 3 minute project, so I don't know why it would have trouble.
Oh, and it also un-rendered everything.
Any thoughts?
Thanks!

LOTS more information is needed for someone to try and help
These questions below may be for a different product... but the information you need to supply is the same, for the products you use
-http://forums.adobe.com/message/4200840
-http://forums.adobe.com/thread/416679
-http://forums.adobe.com/thread/419406

How to import AVI files created in Adobe Premier Elements 2?

I have captured video in Adobe Premier Elements 2 on my PC from my Canon Optura camcorder. I have a few hundred small .avi files that I need a friend to import into his Final Cut Pro so they can be edited along with other footage that he has created. What is the best way to do this? Should I output a different file type from Adobe to make it easier for him to import?
Thanks in advance.
Bob

David Bogie Chq-1 wrote:
Should I output a different file type from Adobe to make it easier for him to import?
<
No, it would be easier to give him the camera and let him capture natively.
bogiesan</div>
Unfortunately the clips are dispersed throughout many tapes so it is not reasonable for my friend to capture directly from the tapes.
I'm new to video editing and I don't know what format is recorded by my camcorder. Reading in this forum indicates that the .AVI files are just "wrappers". Is the compressor part of Final Cut? Would he be able to convert the files? Is it a problem if the time codes are lost. Can I do anything else in Adobe to make the conversion easier?
Sorry for all the dumb questions.

Adobe premier element 9

Hello,
I have a problem with Adobe premier element 9.
I created a project with some photo and in this photo I put a little video to comment it. The project is in 1280*760.
My problem is when I want to record my project in a littler resolution (800*600), all the insert video moves out from the picture.
Do u know if there is an “option” to keep all as it was in 1280*760?
Other information: I tried to record my project in 1280*760, but it don’t work, “undefined error”…. This is an other problem…
Thanks for your help.

For what I am reading, per your desires, I would match the Project's Preset to that of your Video, in every respect.
Scale your still images to match the chosen Frame Size. This ARTICLE will give you tips and more detail.
Now, to get the Video to "come out of the stills," be sure to turn Scale to Frame Size OFF. Then, you will do a PiP (Picture in Picture), with the stills on Video Track 1, and the Video on Video Track 2, above the stills. You will then use the fixed Effect>Motion>Scale and Keyframe the Scale of the Video. You will start with a Scale of 0, so that the Video is not visible, then Keyframe the Scale to what you need, whether PiP (smaller than the stills), or full-frame. If you want the Video to "disappear" back into the still, just reverse the Keyframes.
When done, you can Export/Share to a smaller set of dimensions, with most formats/CODEC's. You will want to keep the Aspect Ratio the same, as with your Project's Preset, so a little math might be required.
If this is not what you want, please correct where I went wrong, and good luck,
Hunt

Please help me!--rendering makes the images or video blurry (very pixelated) deteriorates the image Adobe Premier Elements 13 need help! .jpg and mpeg images, but I have never "rendered" before since I got APE 13 about 6 weeks ago. I am desperate for

Please help me!--rendering makes the images or video blurry (very pixelated) deteriorates the image Adobe Premier Elements 13 need help! .jpg and mpeg images, but I have never "rendered" before since I got APE 13 about 6 weeks ago. I am desperate for assistance!

That's going to be a ridiculous waste of money and energy.
First of all, the current ATI drivers don't support multiple GPUs, so at the moment even a single 4870X2 would be only a 'normal' 4870 (which is quite a speed beast already). GFX drivers evolve rapidly, so things might look different next month, but when it comes to Linux and hardware there's one Golden Rule: stay away from the newest stuff and wait for proper support to get coded.
I also wonder what power supply could possibly cope with the differences between idle and full load; that's way beyond 400W. But then, I'm one of those "quiet&green" types where >100W idle is already a bit much.
I kind of understand that you want to get it done and not worry about hardware for the next 10 years or so, but that's simply not how the hardware world works and never did. At least not for the average consumer.

Hello, I just purchase Adobe Premier elements 12. I installed it but the only problem is when I try to open "new project" it tells me I have to put my password in and username for the first seven days of installation, but when I do that the project never

Hello, I just purchase Adobe Premier elements 12. I installed it but the only problem is when I try to open "new project" it tells me I have to put my password in and username for the first seven days of installation, but when I do that the project never opens, it just has the loading bar loading and then it stops, so I have no idea wat the problem is, please help

new project help
What computer operating system is your Premiere Elements running on?
Have you gone through the typical drills of
1. Latest version of QuickTime installed on your computer with Premiere Elements?
2. Running program from User Account with Administrative Privileges as well as from Run As Administrator applied to the desktop icon
with right click of the icon, followed by selecting Run As Administrator?
3. Does problem exist with and without the antivirus and firewall(s) disabled?
4. Even though the Premiere Elements 12 Editor will not open, can you open the Elements Organizer 12?
If Yes to all of the above, please review the following for a possible solution...
ATR Premiere Elements Troubleshooting: PE12: Premiere Elements 12 Editor Will Not Open
Please review and consider the above and then we can decide what next which might include trying to open
the program directly from the .exe files. (If Windows 7, 8, or 8.1 64 bit, Local Disk C\Program Files\Adobe\
Adobe Premiere Elements 12\ and in the Adobe Premiere Elements 12 Folder are the Adobe Premiere Elements 12.exe
and Adobe Premiere Elements.exe files. Double click the Adobe Premiere Elements .exe file to try to open the project.)
We will watching for your results.
ATR

Im having difficulty downloading Adobe Premier Elements 13 to my PC

I am having difficulty installing my Adobe Premier Elements 13 to my Dell PC. I got though everything I thought but then it said it needed to extract files and put them to one of my files to complete the download. It acted ok, but then gave me the answer of, "Installer has detected that a machine restart may be pending....Its recommended that you quit thje installer and restart the machine and install again." I restarted the machine twice with no luck.

geowife
From where are you downloading Premiere Elements 13? And, are you downloading purchased files from Adobe direct or the Premiere Elements 13 tryout from Adobe direct?
What computer operating system is involved?
If you continue to have problems downloading and installing the program, try the download and install (with antivirus and firewall(s) disabled) from the following
web site and then insert your purchased serial number in it if you are dealing with purchased product.
Remember to read the Note: Very Important Instructions at that web site so that you do not get Access Denied message.
Also, after you go through the Very Important Instructions part and are eligible to click on the wanted file...
a. select the 2 files for your program and computer operating system
b. process File 1 (the .exe file) first - Adobe Application Manager before File 2 (the .7z file) - the program.
More details depending on the details specific to your situation.
Thanks.
ATR

Adobe Premier Elements Video Editor will not open

I just installed version 12 of Adobe Premier Elements on my Windows 7 (64) system and am unable to open Video Editor. I receive a message that the display driver is not current and a newer version would make the program run more efficiently. After some time, the video editor stops trying to load. I have verified all windows updates are loaded and that I have the most current Quicktime version. I have also unloaded and reloaded Adobe Premier Elements but this issue continues to persist. Please assist.

blee3874
I suspect that this might be the immediate area to pursue
1. What is your video card's/chip's make and model?
AMD Radeon HD 8730M, Intel Graphics HD 4000
There have been discussions here about problems with Premiere Elements and a dual video card set up.
http://forums.adobe.com/message/5747654
What happens if you disable the Intel Graphics HD 4000 and just work with the AMD video card?
This is one of John T. Smith's and Hunt's favorite subjects. So we should be hearing from them soon. Meanwhile their presence can be felt in the link that I have referenced on this subject of dual video cards.
More later.
ATR

Slideshow in adobe premier elements 7.0

Similar Messages

Maybe you are looking for