Slideshow in Elements 9: Shows some pictures as "broken"

Hi
When I run a slideshow from Elements 9, the "View/Edit/Organisein Full screen" option, quite a few of the pictures appear "broken" and a "broken" type icon appears. It seems to get worse after that. I'm showing an album of 90 pictures, mixture of JPEG, PSD, RAW files. At first I though the app only supported JPEG but when I stop at the broken file, locate it, and start the slideshow from there, it dissplays fine.
Is this a known bug or limitation? Any fix or workaround?
I have PSE9 and 9.0.3.0 patch installed. Running on a i7 Dell PC with 4GB RAM (so in theory plenty horsepower)
Any advice appreciated
thanks
Stephen

Please ensure that Thumnails are properly gereated for all the files in your catalog. This happens usually when bigger size thumbnail is not readily available to show.
+ http://bit.ly/plFUdD

Similar Messages

Why will transitions in Pre8 slideshow not be accepted between some pictures and accepted between ot

When applying transitions between pictures in a Pre8 slideshow I find that occasonally the space between the pictures will not accept a transition that I am dragging to it. It doesn't make any difference as to which transition that I'm trying to use. I even tried inserting them by right clicking on the space. The frequency of occurence appears to be random. It sometimes occurs after working OK for as few as 2 or 3 pictures and other times it wont happen for 10 or 15 pictures.
I would appreciate hearing from anyone who has had this problem and has been successful in solving it.
Jim

Zoom into the timeline at one of these places.
Often, when arranging or re-arranging photos on a timeline, if you drag one clip too close to another, you actually split it and a small sliver of a clip is between the new clip and the next. When you try to apply a transition, the program can't apply one to such a small clip.
You may also see these accidental "phantom clips" between your main clips if you temporarily switch over to sceneline mode.
Also per the FAQs to the right of this forum and my books, if you don't ensure that your photos are no larger than 1000x750 pixels, you will overload the program and get some pretty strange behavior. Are your photos larger than 1000x750 pixels in size?

Iphoto not showing some pictures?

Hello. I have a slight problem. Some photos in iphoto will not show up. They are like a grey box with a "!" in them. I just rebuilt the thumbnails and they're still not there. Now I'm doing the longer rebuild. I did save the pictures to a dvd just incase (but this was while the pictures were still gone, so those pics are not saved) But I did not save my videos I have. Is rebuilding something else going to get those pictures back? And if so would I loose anything on my library. (Most importantly, my videos.) Thanks for the help in advance!

The ! or ? turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
The most common cause of this is User Activity in the iPhoto Library Folder in the Finder.
Have you altered, moved or renamed anything in the iPhoto Library Folder?
If you haven't, then try rebuilding the database. Hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose the top three options.
Regards
TD

EPDF not showing all pictures in file

I have some pdf docs that show some pictures but not others. The latter just show up as grey boxes. When I sent one of these docs back to the person who sent them to me, so she could check it, she reported seeing the pics just fine, so the files must be OK. I searched the forum and found nothing about ePDF having problems.
The ePDF viewer version is 0.1.8
Linux myhost 3.6.11-1-ARCH #1 SMP PREEMPT Tue Dec 18 08:57:15 CET 2012 x86_64 GNU/Linux

I found this complaint of the same thing:
http://forum.manjaro.org/index.php?topic=2164.0

I m trying to import some picture from my iphoto library but element 12 don't show me the iphoto dialog box , as I can see on my classroom book and in many tutorial.any one can help please

I m trying to import some picture from my iphoto library but element 12 don't show me the iphoto dialog box ,where i choose what i want to import, as I can see on my classroom book and in many tutorial.any one can help please ? thanks

I have the same problem... but the photo library is neither on my iPhone or my Computer!! Please help.. its taking too much space.

Some pictures in iPhoto won't show or copy, but they're there

I'm using iPhoto 9.2.2. Did an update from the App Store just last week but didn't notice if this problem had anything to do with that update.
On some Events, some pictures seem to be missing. At first when I open the Event some of the thumbnails are there and some are thumbnails of one same random picture of wallets that I didn't even realize I had in my Library (I might have added it by accident). After a few seconds all of these thumbnails turn into grey ones, as if the picture wasn't there, but when I double click it I'm able to open most of the missing pictures normally - not all. Here's a screenshot:
When I first open the Event all of the missing photos look like the one with the wallets, but after a few seconds they all turn grey like the bottom ones, except for the ones that seem normal from the beggining. iPhoto says the Event has 88 photos and that includes the greyed out/wallet ones. When I open each of them, some show me a normal picture and some show me a blank page. I can't copy the Event or any of these individually. This is happening with more than one Event, but not all. I suspect if might only be happening with merged Events, but I can't be sure. I also suspect it might have something to do with pictures that have the same name as other pictures in my Library.
I would try to rebuild my library, but the whole reason why I'm trying to copy these pictures is that I just lost my backup drive. So this IS my backup right now. These are pictures I never really look at so I have no idea when this started. I also can't seem to find the real wallet picture to see what would happen if I deleted it. I think I must have saved it accidentaly from the internet.
Help?

If you have the space available on your hard drive and don't aready have a backup copy of the library make a temporary, backup copy (select the library and type Command+D) and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

Preview mode showing some elements shifted vertical ;(

One of my pages if showing some elements shifted vertically when viewing in preview mode. Its rather annoying as only one page is showing this. The design section shows all elements as they should be. Please help!!
Image showing design mode as intended with Event title bar and featured events image in correct place.
Preview mode below showing feature event image shifted vertically with event title bar.
Any helpers got a fix for this?

I also have a similar issue with a page on my site.
I have a vertical scroll page with anchored links on the page.
Each section of the page I have denoted by a vertical solid color rectangular bar.
In design mode these bars are the correct lenght and position, however in preview I had issues where they were either shifting vertically or after trying out some fixes, which I will list, they now start (I think) at their designated start points but their end point is not that which i have specified.
Fixes I tried:
I put the anchors at numbers below 0 - no change
I changed from one continous text box to segmenting the text boxes into section which correspond to the different colored rectangular bars - this, once grouped with corresponding bar and text box, solved the issue of the bars starting in the wrong location but did not fix their their over run at the end as in picture.
I then put the grouped bars inside their respective text box and wrapped text with a margin of 20 - no change
I then grouped all simialr grouped items together - no change
I would greatly appreciate your help and I will forward the site with a link to this thread to muse support.
yours faithfully.

Slideshow Thumbnails Blank - Some pictures missing

My first time using iWeb and iPhoto to publish pictures to the web. The iPhoto interface to Homepage seemed to do this much easier... but anyway.
I created my album, clicked the iWeb button, chose a template, updated text and gave my pictures captions. Published to .Mac and when I view the slideshow, the navigation part at the top is all blank pictures, and the slides change very slowly. Most of the pictures do show up in the slideshow - but some don't. Looking at my iDisk, I have plenty of free space and all the pictures (including the thumbnails) appear to be there. If I click on each picture by itself on the main page it loads and shows the pictures one a time that way.
I've removed the files from iDisk and uploaded again, I've erased the site and tried again etc. I've tried Safari, Firefox and Explorer (on a PC). I've cleared the Safari cache, reloaded pages etc. Always the same thing. maybe mucking around and deleting has caused issues? If so - how do I reset everything? Any suggestions?
Running on my PowerMac G5 Dual 2.0, 10.4.5, iPhoto 6.0.2 and iWeb 1.0.1.
You can check out the result at:
http://web.mac.com/butlers
There is also no reflection that I've seen on other's sites. Not sure why. The reflection is neat and not sure I'm bought into it - but maybe it's a symptom of what's going on here.
Thanks,
Sean
12 PB Rev C (1.33 GHz G4) & PowerMac G5 Dual 2.0 Mac OS X (10.4.5)

Thanks Will,
I see it now as well. Wonder why there was a delay. Perhaps I whacked out the iDisk somehow and it too some time to clean itself up ?? Not sure - but you are right - it works. Thanks for checking and helping out.
Sean

I want to play music from my playlist when I am using slideshow of my pictures in Ipad, but I can only choose ONE SINGLE song, and it continuously repeates itself. Is there a way to play the complete playlist while showing my pictures?

I want to play music from my playlist when I am using slideshow of my pictures in Ipad, but I can only choose ONE SINGLE song, and it continuously repeates itself. Is there a way to play the complete playlist while showing my pictures?

You can start the playlist playing in the iPod app and then switch into the Photos app and start your (non-music) slideshow - as you've found out you can currently only select a single track in the Photos app. Whether that will change in iOS 5 I don't know, but you could try leaving feedback for Apple : http://www.apple.com/feedback/ipad.html

Is Copy Paste Pans & Zooms Possible in Photoshop Elements Slide Show Editor Slideshow?

In the Photoshop Elements Slide Show Editor, someone wants to create a unique pan and zoom effect for one photo and be able to apply it the the rest of the photos in the Filmstrip without having to do that on an individual photo basis.
In the Slide Show Editor, Edit Menu/Apply Pan & Zoom to All Slides or Apply Pan & Zoom to Selected Slide(s) does not get the job done. Instead it looks like it just applies the default Photoshop Elements pan and zoom. I have investigated several routes to the goal unsuccesful and have concluded that Photoshop Elements Slide Show Editor offers no such copy paste pans & zoom feature.
I have detailed how to add more than one pan & zoom per slide, how to get the pan & zoom copy/paste job done in Premiere Elements, either doing all the pan & zoom in Premiere Elements or creating the pan & zoom in Photoshop Elements for one slide, using Send to Premiere Elements, Break Apart Adobe Photoshop Elements Slideshow, copy/paste of the transferred pan & zoom. Believe it or not, that does work. I know that there will be skeptics who feel that the pan & zoom timing would be distored, but....This person does not have or want Premiere Elements in the equation. So, I am looking for a way out for her.
I am posting the question here for someone to confirm my conclusion or offer a way that has escaped me. If someone has found a way, he/she will be fully created for the contribution and thanked.
ATR

Copy and past funtionaliy is not available in pan & zoom feature. Please do a feature request.

TS4057 I did this and now my videos are not working. They show the pictures aren't there on some and on others it shows they are there, but doesn't show them in the player. When I try to Share anything it just says Waiting for Processing for hours. What d

I did this and now my videos are not working. They show the pictures aren't there on some and on others it shows they are there, but doesn't show them in the player. When I try to Share anything it just says Waiting for Processing for hours. What do I do?
I also got Motion and can't figure out how to use it with Final Cut Pro X. Any help woud be great. Thanks

I have no idea what may have caused your MacBook to stop working, but from your description it kind of sounds like it may have started before you ran Software Update and installed the new Apps. Just the general slow feeling and bugginess is what tips me off. You said that you weren't sure if you had closed all open windows, that doesn't matter if the computer restarts itself. It automatically closes all other open applications when restarting.
As to your data being retrievable, if when you take it in they do a fresh install of the OS, then no, it will not be unless you want to pay several thousand dollars to a software retrieval company.
I am glad to hear that you have taken into the Apple Store to get it fixed, and that you have all of your purchased music backed up to your iPod. You should be able to just transfer it all back to iTunes once you get your computer back should it be necessary.
As a side note, the proper place for this topic would probably in the MacBook forums, not iTunes since there is no evidence that iTunes started the issue.

Some pictures from My Photostream not showing up in Photos

I noticed that something strange is going on in the new Photo App. As you may know there are two choices for viewing photos: Photos and Albums.
The first (Photos) shows my pictures ordered by date and location. The second (Albums) show it all in the old fashioned way.
Today I was cleaning up my Photoroll since all my pictures are also in My Photostream and I want to gain some more free space on my iPhone. The strange thing I noticed after that was that on the Photos overview some pictures from My Photostream are shown, but a lot of pictures are not. If I place those pictures back into my Photoroll from My Photostream, they appear in the Photos overview again. But that's not what I want since they arte stored twice on my device this way...
Can someone please help me understand how the new photo app works? Why are some pictures shown, and some not?

Do the choice items match up in the form to the options available in the list?

HT5622 Some pictures in my iCloud show up blank on my ipad.... But it says I have zero pics on my iPhone... Where are my pictures?

Some pictures in my iCloud show up blank on my ipad.... But it says I have zero pics on my iPhone... Where are my pictures?

Photostream in the cloud only keeps photos from the last 30 days (subject to a 1,000 photo limit). When photostream syncs the photos to your device they will stay there (subject to a 1,000 photo limit) until deleted, which means you may well have more photos in your photostream album on your device than there are in photostream in the cloud.
The consequence of this is that if you turn photostream off and on again on your device (or enable it for the first time), it will only be populated with photos from the last 30 days, which may not be all the photos that were previously in the photostream album on that device.
The problem I see is that the photos aren't on your phone and you won't be able to get them from the cloud because they are over 30 days old.
As for your iPad it sounds like they might be there, but you have encountered some sort of corruption. The problem is you can't turn photo stream off and on again to reset it, because you would lose what ever you have (even though they are corrupt) and they can't be recovered from the cloud.
The only suggestion I have is to try restarting the iPad.

I have problems with syncing my events folders från MacBookAir to Ipad2. Some pictures show and not others?

I have problems with syncing my events folders från MacBookAir to Ipad2. Some pictures show and not others?
Anyone else having this problem?

Try deleting the photo cache from your computer and then re-try the photo sync and see if they then copy over - the location of the cache, and how to delete it, is on this page http://support.apple.com/kb/TS1314

I created a slideshow in Elements 12 and burned a DVD in Premiere 12. Why was the orientation of some of some of my slides rotated 90 degrees

I created a slideshow in Elements 12 and burned a DVD in Premiere 12. Why was the orientation of some of some of my slides rotated 90 degrees?

Rick
Have you looked at Delete and Close Gap as well as Delete for what you describe?
Nonetheless, adding or moving clips to an existing Timeline content without disturbing the existing Timeline content can be challenging and complex under certain scenarios.
Typical solutions include making these moves with a keyboard modified held down (Windows Alt or Ctr). I am strictly an Elements Windows user, so we will need to find the Mac counterparts for the Windows keyboard modifier techniques.
Also, if one move triggers a multi-chain disaster, then you should consider grouping block of clips so that they do not move while you are busy with your Timeline maneuvers. Check out the Clip Menu options for Group and Ungroup.
Some times in the "Mac condition", you need to use fn in addition to the command to achieve some of these Windows counterparts.
The following video tutorial on arranging clips and keyboard modifiers is being posted for informational non promotional reasons.
Premiere Elements: Arranging clips on the Timeline using modifier keys | lynda.com - YouTube
It is demo'd with Premiere Elements 8, but the principles are the same for later versions of the program.
Here is one variation of the issue on Windows.
ATR Premiere Elements Troubleshooting: PE: Delete and Close Gap Failures
You should not have to delete audio to prevent it from being split by an addition to an existing Timeline. The keyboard modifiers should help you resolve this type of issue.
Please review and consider.
Thanks.
ATR

Slideshow in Elements 9: Shows some pictures as "broken"

Similar Messages

Maybe you are looking for