Slideshow in QT 7.1.3 in Windows: Frame Rate Fixed at 29.97

I have my sequentially numbered JPGS, Open Slide Show in File menu, highlight the first JPG, but then the Frame Rate is fixed at 29.97, no opportunity to set to 3 seconds per frame or 10 seconds a frame or anything except 29.97 per second.
I have uninstalled and reinstalled the program: no change. The program was downloaded recently from Apple and says that it is validating the install when the installer is run. Antivirus is switched off when the program is installed.

I thought this Windows version bug had been "squashed" in 7.0.4. Maybe not.
You should get two dialog windows when choosing "Image Sequence". If your files are properly sized and named sequentially you highlight just the first image file in the list and click OK. A second dialog window should then open that offers a "frame rate" for your import.
You say that it refuses to allow you to edit the frame rate at import? Bummer. A bug.
A simple workaround would be to accept any frame rate it offers and then open this new file. Select all (Control-A) and Copy (Control-C). This places your image sequence in your Clipboard.
Open any audio file and trim, or add to it, to fit the duration you need for your image sequence:
30 images at a duration of 3 seconds each would be 90 seconds of audio.
Select all of this newly trimmed audio and choose "Add to Selection & Scale" from the Edit menu. This will add your video track to the duration of the audio track.
Open the Movie Properties window and either "Extract" the video track or "Delete" the audio track and then Save As self-contained. mov file.
Maybe not what you wanted to hear.
Does the same issue occur under different user accounts? It may be something we could isolate.

Similar Messages

Msi GeForce 4 4200 frame rate locked at 60 with Windows 2000

Lost here..... I have an MSI Geforce 4 4200 120MB Video Card slotted on an Asus A7V motherboard - AMD Thunderbird 1Ghz processor with 640mb of ram.
There is a common problem with the Nvidia chip and Windows 2000 in regards to a lock frame rate at 60fps within games.
I've tried several programs to fix this i.e. "Refresh Lock", "Windows 2000/XP Nvidia Refresh rate lock", "PowerStrip 3.15" and "NVFresh Tool 1.0"
But nothing seems to work. I'm sure these program work with older Nvidia cards but not with GeForce 4.
Any Ideas? I even turned the Vsync off and on.
HELP!

p-fulla, I'm not to sure about your system and Windows XP but check out these tweeking sites.
GEFORCEZONE.COM
http://www.geforcezone.com/
and
TWEAKED.NET
http://www.tweak3d.net/
TECHTV.COM/SCREENSAVERS
http://www.techtv.com/screensavers/
(A little advice: If you can, dump XP and install a copy of Windows 2000 second edition. They both have the same KERNAL but I find that Win 2000 is much more compatible for now. I give XP 2 more years before it's the OS for all. I've reinstalled 6 systems with Windows 2000 because of compatibility problems.)

Open Firefox 4 in new window gives a Window frame and address bar does not refresh the current url

Using Firefox 4 in Windows 7
I have customised the position of tabs (Tabs on top) and which toolbar items I would like to see.
The first window I open of firefox 4 always has the configuration as I set it.
Whenever I open a new window of firefox either:
- Right-click a link to open in a new window
- Click a link anywhere (such as an email) to open a new window
- When a website opens a page in a new window
Bad Results:
- The new window does not have the configuration as set in the main window (Tabs on top)
- The new window has a windows type window frame around the firefox window (see two sets of window controls eg. "minimise", "restore" and "close")
- The open page does not show the url - navigating to a new page within this window will not update the url :: strangely enough clicking the url page icon will update the url as it should be
- Sometimes when restarting firefox, it will open the first main window with the remembered tabs and then open approx 8 or so blank new windows as described above

This issue can be caused by an extension that isn't working properly.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

How do I turn off the window maximizing feature when I click the top window frame?

Clicking on the top window frame causes Firefox to maximize. This is the only program I have that does this, so I am constantly doing this accidentally. It causes me no end of annoyance, having to minimize the Firefox window every time to see the other window I am using at the same time. Is there a way of turning this "feature" off? I have looked through all controls tabs I can find, and the help files on the Firefox website, and can find no answers to this.

Unintended consequences ... my favorite kind! New information - this appears to be a Windows issue - sorry Mozilla. Another app (Word) just started doing the same thing (previously only observed with Firefox). If the app is too close to the top of screen, and you select it, and slightly move it, it maximizes. I heard this is standard in Windows 7, but I am using XP. This is becoming typical of the annoying hubris of Microsoft that will likely make my next OS Linux. I am not blind, and in need of Microsoft making a single window maximally readable, especially at the expense of all the other windows. If I wanted my computer to make all of my decisions for me, I would have stuck with Apple!
Sorry Mozilla help board - I just had to get it off my chest!

PDF launched in/out of CHM window frame

Hi,
I have a couple of .chms developed with RH 7. In these, I have a couple of merged CHMs that contain topics whose only function is to launch a PDF file.
The HTML/JS code that does this is below. It is not clear to me that this code has anything to do with what I am seeing. I don't know where the script came from. If there is a better way, please share it!
My prefererence is to have the PDF launched within the CHM's window frame. And it does do this, but only when the CHM is launched by another program. So if you view the "primary layout" from withing RH and select the topic, the .pdf opens up right in the frame.   This is also the case if the .chm is launched from our application executable using HTMLHelp() from the Windows SDK.
But, if you click on the .CHM file and open it directly from windows, when you select the topic that maps to the .PDF, the .PDF is opened in an independent launch of Adobe Reader, not in the .CHM frame.
Does anyone know why this works this way, and if there is a way to correct it? I would like the operator to be able to open the .CHM directly and still have the .PDF displayed within that frame.
Thanks.
Suzanne.
Here is the HTML code that launches the .PDF:
<html><head>
<meta stuff blah blah blah...>
<title>External PDF</title>
<script LANGUAGE=JavaScript TYPE="text/javascript" src="SomeScripts.js"></script>
</head>
<body onLoad="parser('../FolderName/Filename.pdf')">
<h1 style="font-family: Arial, sans-serif;">External PDF</h1>
<p> </p>
</body>
</html>
Here is the script:
function parser(fn)
var X, Y, sl, a, ra, link;
ra = /:/;
a = location.href.search(ra);
if (a == 2)
X = 14;
else
X = 7;
sl = "\\";
Y = location.href.lastIndexOf(sl) + 1;
link = 'file:///' + location.href.substring(X, Y) + fn;
location.href = link;

The only other (still similar) method is to touch at the bottom of the active screen and drag SLOWLY up to place it in the corner, it will slow down the animation some, but still basically the same.
Otherwise, there is not a way to disable that.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Rounded/curved edge/corner in page window frame/box of SAPscript

Hello,
Can anyone tell me whether SAP ECC6.0 has any functionality which allows a page window frame/box within a SAPscript form to have rounded/curved corners for the rectangular shape?.
I have reviewed various documentation and forum posts, sap notes etc. but none of them even bothered to mention or explain this. Other forum posts I have seen re this topic simply said it was not possible but I hope for a more explanatory answer than that.
It wouldn't appear to be a big ask for a form to have boxes of different shapes rather than just hard straight lines and edges but perhaps SAP have some reasoning for it which I've not seen.
Appreciate if someone out there can elaborate about this and what alternatives there would be, for example could we upload a graphic of a rounded edge box and then place text over that?.
Thanks in advance,
Michael

Thanks but my question is applicable for Smartforms too. I know SAPscript is OLD and new forms should be developed with Smartforms but at the moment we are tweaking some exisitng SAPscripts and when time permits at a future point we will move to Smartforms.
To other people out there, do you know if there is functionality in either SAPscript or Smartforms to apply Rounded/curved edges/corners in page window frames/boxes?.
Thanks.

Cannot create slideshow with high frame rate

I have just bought QuickTime Pro version 7. I am using Windnows XP SP2 on a Pentium D machine.
I am trying to create a movie with still images I captured from my digital camera. I created a 10 seconds slideshow and set the frame rate to 30 frames per second. I then saved the file as a Quicktime movie. When I played the movie with my QuickTime Player, I could see actions for the first two seconds only. After that, the picture didn't change eventhough the progression bar was moving. Once the movie reached the end, the player then changed the frame to show the last picture of my slideshow.
In short, only the first 60 images are shown in the first 2 seconds. Then the slideshow was stuck with the 60th image, until it changed to the 300th image at the very end.
Does anybody has the same experience? Did I do anything wrong?

One more thing. If I set the frame rate to be less than 10 frames per second, it works fine. It just won't work with high frame rate.

File(s) appear in all OS X finder window frames. How did I remove? TIA

Yep. File icon with filename under it appears on all finder window frames next to Search window. I have two: one an existing file on Desktop and another for which I deleted the actual Desktop file which now appears as a question mark only. I think I dropped these Desktop file on a Finder window frame. My bad. I can't find a way to rid myself of them. Maybe Disk warrior can help? If I log in under a different user these files do not appear on the window frames. Can someone help?

Thanks for the response. I've looked into things in the past and this gives me more things to look at. Let's first talk about that file that is not shown as a ?. It's called Senate Action on Cloture Motions.rtf, although that is irrelevant. The Name and icon appears on the Desktop itself as usual, and on every Finder Window Frame when I'm logged in (as opposed to another user logged in). The file is also in the Desktop Folder as you say, but only once. In effect, I have 3 name instances of that file. The ? file no longer appears on the desktop, since I deleted the actual file, but the ? for it still appears on Finder window frames. The ? does not appear in the Desktop Folder. I ***think*** I somehow created an alias for these files, but don't know how I got them on the Finder Window frames. If I could find the alias, I may be able to fix this myself.

When exporting a slideshow, what does "current frame rate" mean?

I'm exporting a slideshow from iPhoto '11 and I'm using custom settings
I am wondering when you click the custom settings button
what does "current frame rate" mean?
does it mean use the current frame rate that it uses to let me preview the slideshow?

Welcome to the Apple Discussions. What happens to the slideshow other than giving you this error. Don't know what it means. However, several users have reported iPhoto crashing when trying to export a slideshow. You might search this forum for that to see if you're experiencing something similar. As far as I know there was no fix found.
Be sure to report it to Apple via via http://www.apple.com/feedback/iphoto.html.
OT

After installation of 11.0.6 update und disabling protected mode text menu bar and window frame are disappeared

Hello,
see topic.
my environment : WIndows Server 2008R2 SP1 witx xenapp 6.5.
adobe acrobat 11.000 without protected mode and 11.0.06 with protected mode works properly
F9 reactivate the menu bar and the window frame but it is not practicable for my customers permanently F9 to press
protected mode has to be disabled
greetings
Don Mentiroso

This looks like a bug and I'll have it investigated.
Ben

Firefox 4 - Opening in a new window puts a second windows frame around the firefox browser window

Using Firefox 4 in Windows 7
I have customised the position of tabs (Tabs on top) and which toolbar items I would like to see.
The first window I open of firefox 4 always has the configuration as I set it.
Whenever I open a new window of firefox either:
# - Right-click a link to open in a new window
# - Click a link anywhere (such as an email) to open a new window
# - When a website opens a page in a new window
Bad Results:
# - The new window does not have the configuration as set in the main window (Tabs on top)
# - The new window has a windows type window frame around the firefox window (see two sets of window controls eg. "minimise", "restore" and "close")
# - The open page does not show the url - navigating to a new page within this window will not update the url :: strangely enough clicking the url page icon will update the url as it should be
# - Sometimes when restarting firefox, it will open the first main window with the remembered tabs and then open approx 8 or so blank new windows as described above

I have troubleshooted this issue and have found what I think is a resolution.
The cause of this issue seems to be Profiles.
Previously when running firefox 3 I had multiple profiles setup. when deciding to update to firefox 4 I removed these old profiles.
When installing firefox 4 for some reason it used a "default" named profile, and this caused the problems I described above.
RESOLUTION:
Ran firefox.exe -ProfileManager
created a new profile, it named itself "Default User" I then selected the new default and tested. The window behavior is now acting as it should wothout the above problems.
I deleted the old profile and now it works, using the new profile.

How to blurr background of this image,while mting the window frame?

I would like to blurr the background of this image of mom and child,while maintaining the integrity of the window frame. (ie i don"t wish to change the frame or blurr it.)
i know if i select the mom and child via selection tools and then go to filters and gauserian blurr and hit ok;it will blurr the background as well as the window frame. I am sure this involves two procedures,but how would it be done? Thanks for your help!!

Open the picture file
Make a selection of the frame. I used the magnetic lasso tool, which works very well here. Once the selection is complete (see marching ants), go to Layer>new>layer via copy
Use one of the selction tools, e.g. lasso ot selection brush, to select mom and child. Layer>new>layer via copy
Blur the background layer with Filter>blur>surface blur
To enhance this a bit, I applied unsharp mask to the frame layer and to the layer with Mom and child
You could also blur the entire picture and use a mask to mask out the blur on Mom and child.

Itunes 10.7 visualizer- windows 7 frame rate display

I just want it to display the frame rate on itunes visualizer I did it once but i forogt how. I am running windows 7 ultimate 64 bit

I have tried 2 different computers & to different browsers. (firefox & chrome).
Are both computers on the same wireless network? (Issues with a router can sometimes cause these sorts of symptoms.)

How to set the window frame icon of javafx.scene.control.Alert ?

Hi,
I am looking into using the new Java 8u40 Alert Dialogs (javafx.scene.control.Alert) and I am struggling with setting custom (application) icons for the window / stage.
I mean that icon, which appears in the upper left corner (on Windows OS) of the window frame, which you can set for normal stages with
javafx.stage.Stage.getIcons()
Similarily I want to apply a custom stylesheet to the Alert.
How can I do this?
Is it really only this way?
((Stage)alert.getDialogPane().getScene().getWindow()).getIcons().add(...) ?

I think you already have the recommended way to set an icon for Java 8u40. Maybe some future Java version might add some additional API to make it a little bit less clunky, but for now, just go with the same code you have:
((Stage)alert.getDialogPane().getScene().getWindow()).getIcons().add(...) ?
It is the same technique used in:
javafx - How do you set the icon of a Dialog control Java FX/Java 8 - Stack Overflow
and in makery's dialog tutorial:
JavaFX Dialogs (official) | code.makery.ch

Starting sunstudio remotely provides an IDE with no "window frame"

Logged into the console and started sunstudio. It started correctly in a window which code be moved and resized and closed.
Logged into the same node using remotely starting e.g. a xterm or dtterm. In this terminal started sunstudio which were started with the tool bar and so on, but there is no window frame. Hence the IDE window can't be moved, resized etc.
Does anyone have any hints forward ?
Rgds Peter

The problem I apparently had was I used Reflection to connect from my PC to the node where my home directory is located using a REXEC connection starting a dtterm on that node and from there I made a TELNET connection to the Solaris node.
I now made a new connection directly from my PC using Reflection but with a TELNET session starting a dtterm on the Solaris node.
Now I have the frame and top bar.

Slideshow in QT 7.1.3 in Windows: Frame Rate Fixed at 29.97

Similar Messages

Maybe you are looking for