Slideshow loop after ios8

After installing ios8 on my ipad2 my slideshow will no longer loop.  Shuffle seems to work.  I tried setting it to not loop and back and also tried changing the transition style with no change to the looping.  The pics I have on the pad show one time through and then goes back to the home screen (not a lock screen).  I'm not running any music with my pics. 
Is this a known issue?  Can the app be reset without resetting the whole pad?  Any help would be appreciated since slide shows for trade shows is mainly what I use it for.
Thanks,
Duane

You aren't running a Classic operating system.  See where to post here:
http://discussions.apple.com/docs/DOC-2463

Similar Messages

  • IBooks problem after iOS8 download

    My iBooks is not functioning correctly after iOS8 download. Keeps looping trying to download books, so cannot select to transfer to iCloud. Also while reading book shuts down & closes.

    I have been having the iBooks crashing problem in iOS 8.x since I installed it on my iPad Air.  I tried bunches of different things but it would only work without crashing in Airplane mode.
    Today I did a complete restore via iTunes and set it up as a new iPad.  I did not restore my backup to it.  I simply set it to sync all my books, music, apps and photos in iTunes and when it finished syncing iBooks is no longer crashing on me.
    I don’t know if this will work for everyone/anyone else.  I’m also using Yosemite and iTunes 12, so that might also make a difference.

  • HT6114 Reboot loop after 10.9.2 upgrade

    My 2009 (dual-quad) Mac Pro 4,1 is now stuck in a reboot loop after upgrading from 10.9.1 to 10.9.2.
    //edit: I realized there wasn't a question: What is wrong with my computer and how do I fix it?
    So far I have tried:
    * Repairing the disk
    * Repairing permissions
    * Zapping the NVRAM/PRAM
    * Resetting SMC
    * Copying BootCache.playlist from a backup to /var/db
    Other things to note about my setup:
    In addition to the original hard drive, I installed a 4tb drive from which I have been working with since June. It is the 4tb drive that has 10.9.2 installed. The original 650gb still has 10.8.4 installed and all my original data pre-June.
    Also installed is a VisionTek Radeon 7870 video card which powers my numerous monitors. I do not recall having to install anything extra, or modify any settings to get it to work. The only downside is you can't really see anything when booting.
    In addition to the VisionTek card I also have one of the factory Geforce 120 cards installed. Using another monitor attached to that card I've been able to monitor the boot process using the command-v verbose output.
    Of notable interest I get the dreaded "BootCache: unable to open /var/db/BootCache.playlist : 2" error, along with a few SMC errors. If these are important I can attach pictures taken of the boot process.
    I am able to zap the NVRAM and boot the old 10.8.4 650gb drive. It loads fine. 10.9.2 will not boot into safe mode, but will boot into recovery mode.
    As a final attempt to fix the BootCache error I copied it from a Time Machine backup into /var/db/ ensuring the correct permissions were set. After rebooting the file is deleted again.
    I would greatly appreciate any help on this issue as this is my work computer. I do have full backups via Time Machine so I can reinstall, but I'm hoping there's another solution.

    I just started a discussiion related to this topic in "Mac Pro."
    https://discussions.apple.com/message/25019730#25019730
    " I have a 2009 dual quad core Mac Pro (4.1) with an upgraded Radeon 7950 GPU. I use a 30" Apple Cinema display (DVI) and  a 27" LED Cinema Display (Display Port). After updating to 10.9.2, the Mac would not boot, but went on a continuous re-boot cycle every 5-10 minutes without a flicker of life in either display. I unplugged both displays and the Mac booted. I could log in remotely from my laptop. I then attached the 30" Cinema Display into the DVI port and the Mac booted normally."
    Dave

  • After IOS8 upgrade IPhone5s syncs with exchange but IPad2 syncs ONLY Mail and Contacts, NOT Calendar.  Totally stumped. Ideas anyone?

    After IOS8 upgrade IPhone5s syncs with exchange but IPad2 syncs ONLY Mail and Contacts, NOT Calendar.
    Also, my other tablet - Samsung TabS - has same issue - calendar wont sync. My IPhone and my desktop (windows) synch just fine.
    Google calendar syncs on all devices. Totally stumped. Ideas anyone?
    THANKS

    1.      Log onto Outlook Web Access
    2.      Top right hand part of the screen select "Options"
    3.     Select "See All Options"
    4.      Select "Phone" menu
    Check if you have 10 Devices registered.
    If you have, you need to delete one of them to add your new Smart Phone to Exchange for synching
    Check the "Last Sync Time" to indicate if this device is still active or not.

  • Can not update apps after IOS8 update on iPhone 4s

    Can not update apps after IOS8 update on iPhone 4s
    I can no longer update apps on my iPhone 4s after the IOS 8 update. The IOS 8 update took a very long time to complete, maybe 12 hours, and afterwards, it worked but updating packages were very slow. Package updates have since been problematic and about 4 days ago, it stopped being able to update any packages. I click on them to update and they never make any progress. I have 2.8 Gbytes free and I keep deleting more and more packages, pictures, etc. It seems like, from the amount of stuff that I have deleted, I should have more than 2.8 Gbytes free.
    Is anyone else having this kind of problem?

    16GB iPhone4: Go to Settings, scroll down to iTunes & App Stores and touch. At the top of the next page it shows: Apple ID. Touch this. Select Sign Out. Your Apple ID will go away. Re-enter Apple ID and password. Try App Store again.
       Other solutions were to go to Settings:General:Date&Time and turn off auto-update, then change date to next year. This didn't work for me, nor a lot of other users on the forums. It took reading a lot of threads to find the log-out, log-in solution. Even on the official Apple Website all I saw was: Make sure your connection is working, battery is charged, desktop is plugged in when you try to sync. OK I exaggerate, but with all the users posting this problem, you'd think they'd post their solutions when they work with a Tech Help call.

  • Apple Composite AV Cable no longer working on Ipad2 after ios8 update. Only getting sound, can you revert back to ios7 or buy a cable that will work any help would be appreciated

    Apple Composite AV Cable no longer working on Ipad2 after ios8 update. I'm only getting sound no video can you revert back to ios7 or buy a cable that will work any help would be appreciated
    Thanks

    The 30-pin connector on the iPhone 4 dock might not have all the connector pins to do video.
    I'm 99% sure the Universal Dock does have the pins (and therefor supports video out).

  • How to stop a while loop after certain time using Elapsed time vi

    how to stop a while loop after certain time using Elapsed time vi.

    Hi Frankie,
    Just place the Elapsed Time VI inside the WHILE loop, and wire the 'Time Has Elapsed' output to the conditional terminal in the lower right corner (which should be set to 'stop if true' by default).
    In the future, please post your LabVIEW questions to the LabVIEW Forum.  You have a much better chance of getting your questions answered sooner, and those answers can then help others who are searching the LabVIEW forums.  Thanks!
    Justin M
    National Instruments

  • Z68a-gd65 boot loop after bios update using USB

    Hi there,
    My  z68a-gd65 (G3) went into a boot loop after I did a bios update from a USB key that I installed using the latest BIOS version on the MSI site 7681vP8.zip
    After the system restarted, it keeps booting up for 5 seconds and then shutting down, I removed all external devices and the Geforce GTX 550 Ti card and used the onboard card, but still no change...
    Is there a way to set the board to factory defaults again???
    Marcel

    Hi there,
    Maybe for others to solve the same problem, I found out what was the cause of this problem, I had a USB/Firewire card installed in the PC, after removing it the BIOS update could proceed from the USB stick as planned.
    After the update though, my USB/firewire card can still not be installed back into the slot, because doing so will make the boot loop appear again, very odd!
    Does anyone know why this new BIOS will not work with the card that has been inside my PC for 2 years???
    Marcel

  • Can i delete iPhoto after iOS8 installation?

    iPhoto was been replaced by Photo after iOS8 installation, so my question is:
    can i delete iPhoto?

    iPhoto was been replaced by Photo after iOS8 installation, so my question is:
    can i delete iPhoto?
    Make a backup to save it.
    Open "Photos" to migrated your photos to Photos, otherwise your photos will be deleted
    Right now, iPhoto is unsupported on iOS 8 and does not run.
    Unfortunately, Photos is not a full replacement for iPhoto. Many features are missing, as you will discover - no Journals, no books, no brushed adjustments, no tags, no Info panel.

  • PHOTO SORTING AFTER IOS8 - PROBLEM SOLVED

    Like everyone else, after IOS8 Event sorting on both my iPhone & iPad were all mucked up... I couldn't find anything! I happened upon a "fix" in the Apple store that has saved me hours and hours of using an alternative photo organizer. It's so simple and sorts my events (with the pictures I already have downloaded on each device). The program is SMART PHOTO ORGANIZER by Backpackr. No, I don't work for Apple or the software developer, but just wanted to share a solution that's cheap and works GREAT for me!!!

    Hi, P/Booth has been an issue at times. Thankfully you found the solution,,Well Done.
    Remember though sometimes it is the initial ? that may need re editing....L

  • After iOS8.1.3 upgrade on 5c lost Verizon cell service (works sporadically,  "No Service" most of time).

    Carrier version Verizon 18.1
    iOS version 8.1.3 (12B466)
    iPhone 5C (ME553LL/A)
    After iOS8.1.3 upgrade on 5c lost cell service (works sporadically). WiFi works fine, all other phone functions work fine.  Replaced SIM at Verizon store, updated carrier settings, did a factory reset, and nothing works.  About 20% of the day I will get service while sitting in a high-coverage area.  If
    I restart the phone several times, sometimes it re-syncs to the network. 
    Prior to iOS 8.1.3 upgrade, phone was working fine, no signal/service issues.  I am not 100% sure what version of iOS and carrier I was running prior to the upgrade (Verizon 18.0? and iOS 8.0?).  I have found no way to roll-back to the prior (working) version of iOS that I was running.
    This is an issue somewhere between Apple and Verizon, so I have found it frustrating to resolve.  I have spent ~2.5 hrs over 3 support sessions with Verizon.  Have no submitted ticket to Apple support.  Seems like others have had similar issues – but not a common issue.
    Let me know if you have suggestions while waiting for Apple to help.
    Thanks,
    John

    Couple things you can try, Reinsert the sim and power cycle the iPad. Also go to settings>general>reset then select reset subsciber services then attempt to log in to your verizon account, lastly reset network settings and see if that helps. If none of the above help, i would take to apple retail store to have serviced or replaced or contact verizon to make sure everything is good on there end as well.

  • Intallation loop after configuring X in Solaris 8

    The installation program gets into a loop after configuring X.
    It test my X setting, attempt to continue the installation, laungh a X test screen, goes back to the logging screen and says "All devices configured" go back to X test screen and then bag to the log screen and says the same "All devices configured" again. And it does it forever.
    Does any one has an idea what is going on?
    Thanks

    Try to "bypass" the X11 server configuration, and finish the
    installation in text mode.
    Once solaris is installed, try to install:
    - the latest solaris X11 video driver patch (109401-10 )
    http://sunsolve.sun.com/pub-cgi/show.pl?target=patches/xprod-Solaris_x86IntelDrivers&nav=pub-patches
    - or the Solaris XFree86 Video Drivers and Porting Kit
    http://soldc.sun.com/developer/support/driver/tools/video/video-index.html
    Try to configure the video card with the "kdmconfig" program,
    when logged in as user "root".

  • Memory requirement is continiously increased when i am running my application program in an infinite loop,after certain time it shows an error called low virtual memory

    memory requirement is continiously increased when i am running my application program in an infinite loop,after certain time it shows an error called low virtual memory

    What are you doing with your program. Lots of improper programming techniques can cause this - building arrays, concantanating strings, opening but not closing refrences, etc. Need more details or post your VI. Also, have you looked at "LabVIEW Performance and Memory Management"? It's part of the shipping documentation and available from Help>Search the LabVIEW Bookshelf.

  • How to exit from loop after 3  time

    hi
    how to exit from loop after 3  time
    loop at itab.
    <exit after 3 time>
    endloop.
    thanks

    Hi,
    You can check the value of SY_TABIX inside loop,
    For Example:
    Loop at itab.
    if sy-tabix  = 3.
    Exit.
    endif.
    Endloop.
    Hope it helps
    Regrds
    Mansi

  • Slideshow shaking after burning to DVD

    I have created a DVD containing a video and a slideshow. After burning the DVD and dropping it into my DVD player (actually two different DVD players -- different ages / brands), I notice that while the video is steady and plays fine, I am getting shaking of slides in the slideshow. The shaking is slight, but very noticable. In fact, at times the shaking looks more like a slight bounce (up and down) of the slide, almost evenly spaced in time (i.e. every slide gets a slight bounce). I have tried burning another DVD (burn another), and now I'm starting the burning process from the beginning, so that the rendering can happen again.
    I am burning off my Powerbook's superdrive. Has anyone experienced this, and/or do you have any ideas why this might be happening?
    Brad

    TV - let's talk NTSC - sends one frame of information every 1/30 sec. To minimize flicker, each frame contains two fields of information that are interlaced and transmitted at 1/60 sec. In a moving image this eliminates the 1/30 sec flicker. You will see the interlacing when you make a screen capture of a video image with motion - items in motion will appear as 'teeth on a comb' because the two fields are time separated by 1/60 sec.
    Now lets talk your still images. Lets say each image is displayed on your TV screen for 10 seconds. During that ten seconds, your screen is constantly switching back and forth between two separate field images. Every 1/30 sec a field (lets call it the even field) is displayed followed by a different field (lets call it the odd field) 1/60 sec later.
    Keep in mind these two fields each represent 1/2 of your original image - or every other line of your image (that's why they are said to be interlaced).
    If there in no fine detail, the even and odd fields will be the same - but if there IS fine detail, the two fields will be slightly different. Since they are slightly different (not noticable in area without shap detail) the eye will detect the flicker on a TV set that has interlacing. A computer display (usually) is not an interlaced display, so there is no flicker.
    Note that THIS IS NOT A FAULT of iDVD! It's one of the problems of a system like NTSC video that uses interlaced video fields.
    I had suggested slightly blurring your image - the point is to make the even and odd fields exactly the same so there will be no flicker.
    I've said it before and I'll say it again - it is possible to have a still image that is too sharp on a DVD!
    Note that if you eliminate the flicker on a TV set, the image will look slight soft on a computer monitor. Which is important to you - a TV set or a computer monitor?
    very strange.
    No, it's not strange when you understand what's going on, is it?
    BTW, digital images taken in low light level conditions can have lots of noise (that looks like film grain). This noise can REALLY make a TV image shimmer because there are major differences between the even and odd fields.

Maybe you are looking for