Slideshow on iPad, automatically updated with latest photos

I'm looking to have a iPad slideshow running at events, while allowing event guests to email in photos - which are then automatically added into the already running slideshow. Could be either via an app, or Safari.
It looks like there are some systems that support emailing photos into albums, e.g. picasaweb, flickr, and it's also possible to update an iOS device's photos over email using IFTTT (unfortunately there's a sizeable IFTTT lag), but I haven't yet found a good way to have a running slideshow automatically include display on newly provided images.
I've found ways to get almost there, e.g. I've found apps such as "Web Albums" and Flickring to show picasaweb or flickr slideshows (but you have to exit the slideshow and resync), or embedding a picasaweb slideshow in a custom web page that could auto-refresh (although embedded picasaweb slideshows don't loop), Smugmug (but embedding in a custom web page has some limitations).
Any other ideas?
Thanks!
Andy

Thy this: http://nootrix.com/2012/01/prioritize-wifi-on-iphone/

Similar Messages

HT4623 I can not get my Ipad to update the latest software rendering my Ipad useless. It keeps saying software update unavailable.

I can not get my IPAD to update the latest software the update says it is unavailable at this time try later I have been trying for 5 hours any suggestions as this renders my IPAD useless

If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.0.4. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
You can no longer update to iOS 6.x, or down grade the iOS.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and antivirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
How to Upgrade to iOS 7
The iOS 7.0 update requires around 2.5 GB of storage space, so if your iPad is almost full, you may need to clear up some space. You can check your available space in Settings -> General -> Usage.
There are two ways to upgrade to iOS 7: You can use your Wi-Fi connection, or you can connect your iPad to your PC and update through iTunes. We'll go over each method.
To upgrade using Wi-Fi:
Note: If your iPad's battery is under 50%, you will want to plug it into your charger while performing the update.
Go into the iPad's Settings.
Locate and tap "General" from the menu on the left.
The second option from the top is "Software Update". Tap this to move into the update settings.
Tap "Download and Install". This will start the upgrade, which will take several minutes and will reboot your iPad during the process. If the Download and Install button is grayed out, trying clearing up some space. The space required by the update is mostly temporary, so you should gain most of it back after iOS 7 is installed.
Once the update is installed, you may have to run through the initial steps of setting up your iPad again. This is to account for new features and settings.
To upgrade using iTunes:
First, connect your iPad to your PC or Mac using the cable provided when you purchased your device. This will allow iTunes to communicate with your iPad.
You will also need the latest version of iTunes. Don't worry, you will be prompted to download the latest version when you launch iTunes. Once it installs, you may be asked to setup iCloud by logging into your iTunes account. If you have a Mac, you may be prompted on whether or not you want to enable the Find my Mac feature.
Now you are ready to begin the process:
If you upgraded iTunes earlier, go ahead and launch it. (For many, it will launch automatically when you plug in your iPad.)
Once iTunes is launched, it should automatically detect that a new version of the operating system exists and prompt you to upgrade to it. Choose Cancel. Before updating, you will want to manually sync your iPad to make sure everything is up to date.
After canceling the dialog box, iTunes should automatically sync with your iPad.
If iTunes doesn't automatically sync, you can manually do it by selecting your iPad within iTunes, clicking on the File menu and choosing Sync iPad from the list.
After your iPad has been synced to iTunes, select your iPad within iTunes. You can find it on the left side menu under Devices.
From the iPad screen, click on the Update button.
After verifying that you want to update your iPad, the process will begin. It takes a few minutes to update the operating system during which time your iPad may reboot a few times.
After updating, you may be asked a few questions when your device finally boots back up. This is to account for new settings and features.
 Cheers, Tom

Why is my address book no longer being automatically updated with new entries?

why is my MacBook Pro address book no longer being automatically updated with new entries?
thanks!
Joe

thanks for the question!
i have an iphone that uses addresses/contacts. i don't use icloud because i was getting doubled calendar entries.
updating is done "via itunes on this computer"

Have a wrt54g, v6.1 updated with latest firmward download...

Have a wrt54g, v6.1 updated with latest firmward download. No problems for about a year. Now, problem is, almost daily I'll connect to the net, browse just a screen or two, and get the "cannnot connect" message. Have learned to go into the router (status says connected) and I have to clone the mac address from my pc to the router, go back to status, disconnect, then connect. Then I can go on browsing for hours, no more trouble. Any ideas what I can do so don't have to clone mac so often?

you got cable for your internet provider right? So, it's is really nessecary to do MAC CLONE for cable connections...sometimes that is a must for cable connections..
LinksysGuy

How to fix iPad. My iPad automatically updated itself. Now it doesn't work.

How do I fix my iPad? Today my iPad automatically updated itself. Now it doesn't work.
A red square fills up the screen. Then it goes to an ad for Office. It flips to various apps without touching it.
I tried restarting it several times. This is a disaster. My mother 91 yrs. old has been keeping busy playing
puzzles on my iPad. Now she is driving me crazy telling me to just "plug it in" lol
HELP!

Try a reset first. Hold down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears on the screen. Then let go of the buttons and let the iPad start up.

HT1338 I have itunes version 10.6.3 it seems outdated and needs to be updated with latest version so that Iphone 5 can be connected. Can anyone help me know how to have latest version on my MAC

I have itunes version 10.6.3 it seems outdated and needs to be updated with latest version so that Iphone 5 can be connected. Can anyone help me know how to have latest version on my MAC

You need to purchase a Mac OS X 10.6 DVD, which requires an Intel Mac with at least 1GB RAM. Run Software Update twice afterwards.
If you're already running Mac OS X 10.6, run Software Update until it gives you the option of installing iTunes 11.
(74797)

In LR5, the slideshow does not update with new photos taken by a tethered camera

Hi Everyone,
I'm just trying out LR5 and have found a problem - I've watched vidoes where in LR4 you can setup a slideshow to play from a folder, and while the slideshow is playing you can take new photos from a tethered camera and it will automatically add it to the slideshow.
In LR5, on my computer (Mac), the incoming photo seems to get stuck and does not make it into the slideshow. I have to stop the slideshow, and restart it to see the new incoming photo taken by tethered camera. I need this function for an event, so I'm just wondering whether I'm doing something wrong, or whether it is a bug in LR5?
Note: I've selected the mode "Use: All Filmstrip Photos". What I've observed is that while playing the slideshow without going fuill screen, a newly taken photo from the tethered camera appears as a white tile, but then the thumbnail contents do not change. When I stop the slideshow, the photo then gets "Developed" and then it will be in the slideshow the next time I play it.
Thanks,
Jason

I have an update - I downloaded LR4 and what I wanted to do above works!
So I think there is a bug with LR5.
I'm new to Lightroom - this would be a barrier to me buying LR5. Might have to buy LR4 beforehand...

Problems with ipad 2 updating to latest update

Trying to update to latest version: finish hour long backup then problems on the internet, anyway to bypass backup next time?

TeamRacing6 wrote:
b noir,
I can get itunes to start if I disable Bonjour or if I "repair" it first. Sometimes I can repair Bonjour though add/remove programs, sometimes it will only "repair" using WinRar. Sometimes I have to "repair" Bonjour 2 or 3 times to get iTunes to start.
I have tried uninstalling and reinstalling at least a dozen times. I have tried redownloading iTunes at least 5 times and from different links. This leads me to believe that the dnssd.dll file is not itself corrupt, but this newest version is causing a conflict with XP somewhere somehow.
Team, iTunes 10.2.2.12 has just been released. I installed it and checked, and BonJour's been updated to version 2.0.5.0, and there's a new 2.0.5.0 version of dnssd.dll on my system. So I reckon it's worth a try updating to that to see if it's of any help with your trouble.

Ipod nano updated with latest software will not play or charge on ipod dock

My ipod nano generation 4 is updated with the latest software version 1.0.4
It was playing and charging fine on my ipod docking station until the update.
Now however the ipod is unresponsive on the dock. neither charging or playing. I have tried it charging on the cord and playing on my headphones no issues.
any thoughts?

Hi tj.coventry,
I'm sorry to hear you are having issues with your iPod nano. If it continues to be unresponsive, you may find the steps outlined in the following Troubleshooting Assistant helpful:
Apple - Support - iPod - iPod nano (4th generation) Troubleshooting
Cheers,
- Brenden

Does not load pictures after updating with latest version

I have windows 7 and just updated the latest version of firefox. Since I did this, none of the pictures load in my email.

See:
*http://kb.mozillazine.org/Images_or_animations_do_not_load
If images are missing then check that you aren't blocking images from some domains.
*Check the permissions for the domain in the current tab in "Tools > Page Info > Permissions"
*Check that images are enabled: Tools > Options > Content: [X] Load images automatically
*Check the exceptions in "Tools > Options > Content: Load Images > Exceptions"

My location field on calendar automatically updates with unfinished addresses

When I enter the address in the location field of calendar, even if I type in the whole address, it sometimes substitutes it with an incomplete one which it has plucked from somewhere on the net. How to I overrule the location automatic entries with my own?

I am using Calendar on Yosemite now

Quotation not updated with latest configuration prices

Hi Friends
Quotation is changed using FM-BAPI_CUSTOMERQUOTATION_CHANGE for updating configuration options with changed prices. But Quotation is not getting updated with changed prices, there is no error message thrown.....Please let me know how to fix this.
BR
Lavanya

Hi ,
are u doing the this step ?
The BAPI does not have a database. This means that the relevant application must leave the commit, in order that changes can be carried out on the database. The BAPI BAPI_TRANSACTION_COMMIT is available for this.
regards
Prabhu

Any soltuions yet....In LR5, the slideshow does not update with new photos taken by a tethered camera

I have read a number of issues with LR5 not including new images to a running slideshow. The images load into the filmstrip, but never make it into the slideshow. Has a solution arrived for this bug?
Thanks,
Cnoel

I have an update - I downloaded LR4 and what I wanted to do above works!
So I think there is a bug with LR5.
I'm new to Lightroom - this would be a barrier to me buying LR5. Might have to buy LR4 beforehand...

HT4623 I have apps that say I need iOS 6 but my iPad says I'm updated with latest 5.1 version. Is Apple no longer supporting 1st Gen iPad???

Is there any way to update my iPad even though it doesn't have a camera? I'm hoping Apple isn't going to stop updating and fixing bugs for original iPad.

I don't think bug fixes are ruled out, however iOS6 is for iPad 2+. The theory/thought/idea is that iPad 1's simply can't handle the bells and whistles of iOS6. IIRC, models of the iPhones and Touches are also not eligible for iOS6.
It's really the same as the laptop that I have at work that can only run XP because it lacks a processor and ram to handle windows 7 or 8.
Software moves faster than hardware.

Message send failure. iPad ios7.1 with latest update.

I have tried all of the standard resets. Modem, iMessage, power off, etc. My iPhone is working fine.

I was trying to send to non-iOS devices. My bad.... Works as designed to other iPad, iPhone devices.

Slideshow on iPad, automatically updated with latest photos

Similar Messages

Maybe you are looking for