Slideshow starting point

Just upgraded to iPhoto 09. I used to be able to determine where the slide show STARTED by clicking on the thumbnails (@ top of screen). In 09 it seems that even though I select a thumbnail where I want the slide show to begin, it ALWAYS starts at the beginning. Am I missing something, or is that option gone in this new version?
Thanks,
Dan

Thanks for your reply. I see using "preview" I can at least choose where I what the slide show to begin, but it has to be full screen. Did Apple not think users would want to have a choice in where their slide show began and see it full screen? What if I have a hundred pictures (in my slide show) & I added ten, and only want to view those 10. Yes, Apple says you can do this, BUT you must see them reduced and not using the full size of your screen, which in my case is a 46" flat panel display. It's funny, because I was able to select where I wanted the slide show to begin, AND see it in full screen in the last version of iPhoto. So Apple actually TOOK AWAY FEATURES. That's weird.

Similar Messages

  • Get filename from Watched folder start point

    I have a watched folder as a start point and I can use the
    symbols %F and %E in order to save the output documents in the Result folder.
    This is easy.
    What I cannot do, is getting in a string variable the same filename in order to use it within the Process:
    Is it possible?
    I would like to exploit this filename to discriminate the activities that the file have to make...
    Thanks you as usual!

    thank you Jasmin, your answer is correct and now it works!
    only I don't understand why my way didn't work...
    Instead of a setValue, I used directly a INSERT SQL activity with getDocAttribute(/process_data/@docXML, "basename") as parameter: as is, it didn't work!
    As you suggest, if I put a setValue between the Watched folder startpoint and the INSERT SQL activity (now with the populated string as parameter), it works...
    Bah!
    Thank you again!
    Fabio

  • Email start point issue com.adobe.idp.dsc.provider.service.email.impl.EmailProviderException: Error

    Hi,
    I have configured email start point process. While deploying and invoking the process it is not showing any kind of error. But when i send mail to configured SMTP server i recieves a mail saying
    LiveCycle ES has tried to process your request and encountered the following error: 
    com.adobe.idp.dsc.provider.service.email.impl.EmailProviderException: Error getting user context 
    This response to your original email
    Subject:hadshafds
    Date Sent:Wednesday, May 25, 2011 12:22 PM
    Body:
    Attachments: 
    Why i am getting error. I have tested the pop3 and smtp mail server using send and recieve activity. But when i send some mail to configured server to start a activity it replies with a mail that there is some error.
    Please help me out with this issue.
    Regards
    Sunil

    Hi Diana,
    i tried to add the user and gave invoke access but still having the same issue.
    Please find the following log error
    19:24:20,633 ERROR [STDERR]     ... 60 more
    19:24:20,635 ERROR [EmailResultHandlerImpl] Internal error.
    19:27:50,472 ERROR [EmailWriterImpl] EmailWriterImpl error : Unknown SMTP host: testSebi
    19:27:50,474 ERROR [STDERR] javax.mail.MessagingException: Unknown SMTP host: testSebi;
      nested exception is:
            java.net.UnknownHostException: testSebi
    19:27:50,480 ERROR [STDERR]     at com.sun.mail.smtp.SMTPTransport.openServer(SMTPTransport.java:1280)
    19:27:50,482 ERROR [STDERR]     at com.sun.mail.smtp.SMTPTransport.protocolConnect(SMTPTransport.java:370)
    19:27:50,484 ERROR [STDERR]     at javax.mail.Service.connect(Service.java:275)
    19:27:50,486 ERROR [STDERR]     at javax.mail.Service.connect(Service.java:156)
    19:27:50,488 ERROR [STDERR]     at com.adobe.idp.dsc.provider.service.email.impl.EmailWriterImpl.send(EmailWriterImpl.java:2 60)
    19:27:50,490 ERROR [STDERR]     at com.adobe.idp.dsc.provider.service.email.impl.write.EmailResultHandlerImpl.handleFailure( EmailResultHandlerImp
    l.java:529)
    19:27:50,494 ERROR [STDERR]     at com.adobe.idp.dsc.provider.service.email.impl.write.EmailResultHandlerImpl.handleFailure( EmailResultHandlerImp
    l.java:425)
    19:27:50,498 ERROR [STDERR]     at com.adobe.idp.dsc.provider.service.email.impl.scan.EmailScanJobImpl.handleFailure(EmailSc anJobImpl.java:621)
    19:27:50,500 ERROR [STDERR]     at com.adobe.idp.dsc.provider.service.scheduler.scan.impl.AbstractScanJob.invokeJob(Abstract ScanJob.java:142)
    19:27:50,502 ERROR [STDERR]     at com.adobe.idp.dsc.provider.service.email.impl.scan.EmailScanJobImpl.processInputs(EmailSc anJobImpl.java:165)
    19:27:50,504 ERROR [STDERR]     at com.adobe.idp.dsc.provider.service.email.impl.scan.EmailScanJobImpl.execute(EmailScanJobI mpl.java:102)
    19:27:50,506 ERROR [STDERR]     at sun.reflect.GeneratedMethodAccessor509.invoke(Unknown Source)
    19:27:50,508 ERROR [STDERR]     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    19:27:50,510 ERROR [STDERR]     at java.lang.reflect.Method.invoke(Method.java:597)
    19:27:50,511 ERROR [STDERR]     at com.adobe.idp.dsc.component.impl.DefaultPOJOInvokerImpl.invoke(DefaultPOJOInvokerImpl.jav a:118)
    19:27:50,514 ERROR [STDERR]     at com.adobe.idp.dsc.interceptor.impl.InvocationInterceptor.intercept(InvocationInterceptor. java:140)
    19:27:50,516 ERROR [STDERR]     at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
    19:27:50,518 ERROR [STDERR]     at com.adobe.idp.dsc.interceptor.impl.DocumentPassivationInterceptor.intercept(DocumentPassi vationInterceptor.jav
    a:53)
    19:27:50,522 ERROR [STDERR]     at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
    19:27:50,524 ERROR [STDERR]     at com.adobe.idp.dsc.transaction.interceptor.TransactionInterceptor$1.doInTransaction(Transa ctionInterceptor.java
    :74)
    19:27:50,528 ERROR [STDERR]     at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionCMTAdapterBean.execute(EjbTr ansactionCMTAdapterBe
    an.java:357)
    19:27:50,531 ERROR [STDERR]     at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionCMTAdapterBean.doSupports(Ej bTransactionCMTAdapte
    rBean.java:227)
    19:27:50,535 ERROR [STDERR]     at sun.reflect.GeneratedMethodAccessor332.invoke(Unknown Source)
    19:27:50,537 ERROR [STDERR]     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    19:27:50,539 ERROR [STDERR]     at java.lang.reflect.Method.invoke(Method.java:597)
    19:27:50,541 ERROR [STDERR]     at org.jboss.invocation.Invocation.performCall(Invocation.java:359)
    19:27:50,543 ERROR [STDERR]     at org.jboss.ejb.StatelessSessionContainer$ContainerInterceptor.invoke(StatelessSessionConta iner.java:237)
    19:27:50,545 ERROR [STDERR]     at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke(CachedConnectionI nterceptor.java:158)
    19:27:50,547 ERROR [STDERR]     at org.jboss.ejb.plugins.StatelessSessionInstanceInterceptor.invoke(StatelessSessionInstance Interceptor.java:169)
    19:27:50,551 ERROR [STDERR]     at org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidationInterceptor.java:63)
    19:27:50,553 ERROR [STDERR]     at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:121)
    19:27:50,555 ERROR [STDERR]     at org.jboss.ejb.plugins.TxInterceptorCMT.runWithTransactions(TxInterceptorCMT.java:378)
    19:27:50,557 ERROR [STDERR]     at org.jboss.ejb.plugins.TxInterceptorCMT.invoke(TxInterceptorCMT.java:181)
    19:27:50,559 ERROR [STDERR]     at org.jboss.ejb.plugins.SecurityInterceptor.invoke(SecurityInterceptor.java:168)
    19:27:50,561 ERROR [STDERR]     at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:205)
    19:27:50,563 ERROR [STDERR]     at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke(ProxyFactoryFinderInterceptor. java:138)
    19:27:50,565 ERROR [STDERR]     at org.jboss.ejb.SessionContainer.internalInvoke(SessionContainer.java:648)
    19:27:50,567 ERROR [STDERR]     at org.jboss.ejb.Container.invoke(Container.java:960)
    19:27:50,569 ERROR [STDERR]     at org.jboss.ejb.plugins.local.BaseLocalProxyFactory.invoke(BaseLocalProxyFactory.java:430)
    19:27:50,571 ERROR [STDERR]     at org.jboss.ejb.plugins.local.StatelessSessionProxy.invoke(StatelessSessionProxy.java:103)
    19:27:50,573 ERROR [STDERR]     at $Proxy205.doSupports(Unknown Source)
    19:27:50,575 ERROR [STDERR]     at com.adobe.idp.dsc.transaction.impl.ejb.EjbTransactionProvider.execute(EjbTransactionProvi der.java:104)
    19:27:50,577 ERROR [STDERR]     at com.adobe.idp.dsc.transaction.interceptor.TransactionInterceptor.intercept(TransactionInt erceptor.java:72)
    19:27:50,580 ERROR [STDERR]     at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
    19:27:50,582 ERROR [STDERR]     at com.adobe.idp.dsc.interceptor.impl.InvocationStrategyInterceptor.intercept(InvocationStra tegyInterceptor.java:
    55)
    19:27:50,586 ERROR [STDERR]     at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
    19:27:50,588 ERROR [STDERR]     at com.adobe.idp.dsc.interceptor.impl.InvalidStateInterceptor.intercept(InvalidStateIntercep tor.java:37)
    19:27:50,590 ERROR [STDERR]     at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
    19:27:50,592 ERROR [STDERR]     at com.adobe.idp.dsc.interceptor.impl.AuthorizationInterceptor.intercept(AuthorizationInterc eptor.java:188)
    19:27:50,594 ERROR [STDERR]     at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
    19:27:50,596 ERROR [STDERR]     at com.adobe.idp.dsc.interceptor.impl.JMXInterceptor.intercept(JMXInterceptor.java:48)
    19:27:50,598 ERROR [STDERR]     at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
    19:27:50,600 ERROR [STDERR]     at com.adobe.idp.dsc.engine.impl.ServiceEngineImpl.invoke(ServiceEngineImpl.java:121)
    19:27:50,602 ERROR [STDERR]     at com.adobe.idp.dsc.routing.Router.routeRequest(Router.java:129)
    19:27:50,603 ERROR [STDERR]     at com.adobe.idp.dsc.provider.impl.base.AbstractMessageReceiver.routeMessage(AbstractMessage Receiver.java:93)
    19:27:50,606 ERROR [STDERR]     at com.adobe.idp.dsc.provider.impl.vm.VMMessageDispatcher.doSend(VMMessageDispatcher.java:22 5)
    19:27:50,608 ERROR [STDERR]     at com.adobe.idp.dsc.provider.impl.base.AbstractMessageDispatcher.send(AbstractMessageDispat cher.java:66)
    19:27:50,610 ERROR [STDERR]     at com.adobe.idp.dsc.clientsdk.ServiceClient.invoke(ServiceClient.java:208)
    19:27:50,612 ERROR [STDERR]     at com.adobe.idp.scheduler.callback.ServiceCallbackHandler.execute(ServiceCallbackHandler.ja va:87)
    19:27:50,614 ERROR [STDERR]     at org.quartz.core.JobRunShell.run(JobRunShell.java:202)
    19:27:50,616 ERROR [STDERR]     at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:529)
    19:27:50,618 ERROR [STDERR] Caused by: java.net.UnknownHostException: testSebi
    19:27:50,620 ERROR [STDERR]     at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:177)
    19:27:50,621 ERROR [STDERR]     at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
    19:27:50,623 ERROR [STDERR]     at java.net.Socket.connect(Socket.java:529)
    19:27:50,624 ERROR [STDERR]     at java.net.Socket.connect(Socket.java:478)
    19:27:50,626 ERROR [STDERR]     at com.sun.mail.util.SocketFetcher.createSocket(SocketFetcher.java:232)
    19:27:50,627 ERROR [STDERR]     at com.sun.mail.util.SocketFetcher.getSocket(SocketFetcher.java:189)
    19:27:50,629 ERROR [STDERR]     at com.sun.mail.smtp.SMTPTransport.openServer(SMTPTransport.java:1250)
    19:27:50,631 ERROR [STDERR]     ... 60 more
    19:27:50,633 ERROR [EmailResultHandlerImpl] Internal error.

  • Changing the Media Start point

    So I just had a hard drive crash on me and I did not have back-ups of my footage. It's not to bad because I have back-ups of the project file I was working on. So all I was going to do is a Batch Capture to reconnect all of my clips. Only problem is the person I had capture the footage did not leave enough pre-roll when they did a capture now. So now when it tries to re-capture it says "Cannot locate specified timecode"
    This is because there is not enough pro-roll on the clip to allow it to batch capture. When I look at the Media Start in the browser window for the clip it says it starts at 00:00:02:31. I need to change this to a later start so it does not try to roll the tape so far back. So.....
    How do I change the Media Start Point???
    Thanks

    Ok, I am following you, I just need to make sure the clips in the edited timeline reconnect with the old master clip.
    I could keep the old offline master clip and just make it reconnect to the new captured clip. But will this make all of my already edited clips in my sequence that are looking at the old master clip off by however many seconds I had to reset the in-point to get the tape re-captured?
    Thanks for the tip on dragging clips to the L&C window, I did not know you could do that.

  • Don't know how to set an interactive form as starting point?

    Hi all,
    I need to have a scenario where the starting point of a guided procedure is an interactive form.
    I've made an interactive form in Adobe Designer and saved it as .xdp
    I've made a callable object from it, add it to an action and add the action into a process.
    Now when I initiate a new process in runtime I only see the input fields from the form in a Web Dynpro like design and not the actual form itself.
    I thought it was just a simple handling to start a guided procedure process with an IF but it appears not to be for me.
    Can somebody help me please?

    The input parameters you are seeing in a 'Web Dynpro like' form are more than likely input parameters to the process.  Process input parameters come from action input parameters  in process blocks and actions that are not mapped.  Given that, it sounds like you have not mapped all the input parameters for one or more of your actions in your process.  By default, GP provides the process initiator the ability to specify the values of these inputs when a process is started. To avoid this you can either,
    1. Map all the input parameters.
    2. Specify the process to start automatically under the 'Instantiation' tab for the process template.  By selecting this, input parameters are ignored and their default values used.
    3. Don't expose these parameters if they are not required or applicable to your process.  This can be done at the action or block level under the 'Parameters' tab.
    ~Greg

  • How can I get the mail body of the start point mail

    Hi,
    I am using 'MailStartPoint' activity to fetch mails using POP3 protocol. It is fetching the mail successfully. Now, how can I read the different parts of mail message such as Subject, Body in variables.
    Thank You,
    Hali Gerorge.

    You need to set data types values as below for reading the mail.
    %SUBJECT%
    %BODY%
    %HEADER%
    %SENDER%
    Check this link for more details - http://help.adobe.com/en_US/livecycle/9.0/workbenchHelp/help.htm?content=001463.html
    Also see "Use an e-mail start point" @ http://www.adobe.com/devnet/livecycle/videotraining.html
    ~ Varun

  • Controlling the execution of start points in different nested iViews

    Hi,
    I have an application in which a tabstrip displays a single nested iView within each tab.  Each of the nested iViews loads data via a BI Query data service.  A start point in each iView specifies the initial parameters to load the query data.
    I would like the start point for a particular iView to be executed only when the user selects the tab that contains that iView.  However, at the moment, when the application starts up, ALL of the iView start points are executed, resulting in a long wait.  There doesn't appear top be a way to check if a particular tab has been clicked by the user and then only execute the start point for the tab's iView based on this.
    I would appreciate any suggestions for implementing the above requirement.
    Regards,
    Mustafa.

    Hi KK,
    It seems there is no way to trigger events/actions from tab selections.  However, you can try the following workaround to simulate the same effect:
    [https://wiki.sdn.sap.com/wiki/x/iT0 |https://wiki.sdn.sap.com/wiki/x/iT0 ]
    The approach taken is to replace the tab strip with a series of buttons in a form which then control the visibility of nested iViews and trigger the appropriate queries.
    Regards,
    Mustafa.

  • Help with starting point for "proof of concept" integration

    We are a third party application provider and are attempting to figure out how to do a "proof of concept" integration with SAP.  We are not looking for "certification".  Our product does not appear to fit any of the standard certifications for integration and our experience integrating with other systems indicates that no two integration will be identical.
    We are looking to do a simple integration scenario with an SAP system so we have some basic experience doing it, can say 'Yes" when asked if we have done it, and can create a video showing a transaction being done in SAP and our system also updating (and ideally the reverse).
    Our starting point with respect to SAP knowledge is "0".
    Our basic task list (we think) goes something like
    1.  Figure out the version and modules of SAP with which we should be integrating
    2.  Get access to an SAP system (do we rent, is there a developer/evaluation, ...)
    3.  Put some data in the test system (is there a "sample data" set?)
    4.  Figure out the SAP transactions that map to the business process in which we are interested (moving goods in and out of a distribution center/ware house - are there some "standard business process guides")
    5.  Integrate (we are a .NET web based application so we are guessing this means use the ".Net Connector")
    Could anyone point out any resources (white papers, links, people, places to find people,...) that might be a good starting point?
    Thanks,
    John

    Athol,
    We are looking to recieve notifications out of SAP as tractor trailers at a dock are filled as proof on concept.  The actual integration scenarios we do are more complex and do not match well with any of the pre-packaged certification scenarios.  The real world integration scenarios actual vary substantially from customer to customer in terms of the integration points between systems.
    As we have become more marginally knowledgable about SAP, I think we will end up receiving and sending "IDOC" messages from SAP but have no idea what those IDOC messages are or where to start looking for what a "standard" (if there is one) message SAP would generate in reaction to whatever the "trailer is loaded" transaction is.
    To figure out what the transaction is, I assume we need to identify what version of SAP we should be targeting for a simple integration.  Are there any could references on what the commonly integration methods are and to which versions they apply?
    Something like "hey, if you do an integration with a IDOCs in with SAP Netweaver 2004 then that would good proof you could integrate with 90% of the installed SAP base".  Of course, any links explaining what the versions of SAP are and where they are in there lifecycle and what people are actually using would be helpful.
    John

  • Can't reset project start point

    I decided to add a four bar introduction to a song in logic, and dragged the 'project start' point back to -3 bars. Then I realised when I bounced, it began from 0, so I just selected all and moved everything forward four bars.
    Now, I know I could have used cycle to set my own start and end points for the bounce, but now that I have everything starting at 0, why can I not bring back the project start point to 0? It stays at -3, and I hate having to wait 4 bars for my song to start after I hit O to play the song from the top.
    Can anyone help? Many, many thanks if possible. I'm extremely frustrated!

    Because there maybe is Automation happening before the 1 1 1 1 point. So open any Automation event list with a Keycommand - hit command+1 - a new Arrange page opens displaying the Automation regions - cut those regions at 1 1 1 1 with the scissor tool or by selecting them all and using the Keycommand for "cut at playhead position" and then delete everything before 1 1 1 1.

  • Windows Application Starting Point

    Does a basic (and best practice) framework (or netbeans like project) exist for a java windows application that would include menuing and initial windows classes?
    I have decided to create a application in java and it will be a windows gui application. I understand how to do this but it seems like this would be something someone else has already done. Kind of a starting point for an application. Does something like this exists? I searched online but didn't find anything. Maybe this is because I'm not sure what I'm asking for.

    I haven't seen any nice GUI frameworks for Java, beyond what Java already gives you. It would depend somewhat on what the app does. And you have to decide if you want to use Swing or SWT. Based on a previous thread, it would seem there are also some GUI builder tools out there, if you don't want to hand code it, but they won't produce very nice code; they just help prevent you from having to write it yourself. If this is your first jump into Java GUI, here is a quick Hello World app I just threw together in using Swing; it's a starting point anyway, and might help you get going:
    import java.awt.FlowLayout;
    import java.awt.event.ActionEvent;
    import java.awt.event.ActionListener;
    import java.awt.event.WindowEvent;
    import javax.swing.BorderFactory;
    import javax.swing.JFrame;
    import javax.swing.JLabel;
    import javax.swing.JMenu;
    import javax.swing.JMenuBar;
    import javax.swing.JMenuItem;
    import javax.swing.JPanel;
    import javax.swing.SwingUtilities;
    public class HelloWorld {
         public static void main(String[] args) {
              // Code that affects the GUI should be run on the Event Dispatch thread;
              // Calling launchUI() using SwingUtilities.invokeLater(...) takes care of this.
              SwingUtilities.invokeLater(new Runnable() {
                   public void run() {
                        launchUI();
         private static void launchUI() {
              final JFrame frame = new JFrame("Hello World");
              JPanel panel = new JPanel(new FlowLayout());
              JLabel label = new JLabel("Hello World!");
              panel.add(label);
              panel.setBorder(BorderFactory.createEmptyBorder(20, 20, 20, 20));
              JMenuBar menuBar = new JMenuBar();
              JMenu menu = new JMenu("File");
              JMenuItem menuItem = new JMenuItem("Exit");
              menuItem.addActionListener(new ActionListener() {
                   public void actionPerformed(ActionEvent event) {
                        // This action will be fired when the Exit menu item is selected;
                        // firing off a Window Closing event is basically the same thing
                        // pressing the window close button in the corner does.
                        WindowEvent windowClosingEvent = new WindowEvent(frame, WindowEvent.WINDOW_CLOSING);
                        frame.getToolkit().getSystemEventQueue().postEvent(windowClosingEvent);
              menu.add(menuItem);
              menuBar.add(menu);
              frame.setJMenuBar(menuBar);
              frame.setContentPane(panel);
              frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
              frame.pack();
              frame.setLocationRelativeTo(null);     // this centers the frame
              frame.setVisible(true);
    }

  • Using flex pitch is there a way to fine tune the start point .i'm using it as a audio to  midi function

    using flex pitch is there a way to fine tune the start point .i'm using it as a audio to  midi function

    Thank you for your reply Karsten but unfortunately this didn't help me so far. Or maybe I'm missing something?
    First the link is a tutorial for iMovie on a Mac. I'm using iMovie on iPad so the steps are inapplicable.
    Second it is only possible for me to manipulate the end part of the sound clip to whichever duration I want. But I can't do the same with the 'beginning' of the sound clip.
    I simply want to place some photos in the beginning of my video with no sound in the background then after like 2 secs I want to start the music clip. For some reason that is not possible! Cause every time I drop the music clip unto my project timeline it automatically place it self along with the first frame in the project! And consequently the photos and music are forced to start together.
    Hope I'm making sense...

  • Can't fine tune scene icon starting point

    Hello.
    I have an iMovie HD project that I am finalizing in iDVD 6. It is 90 minutes long and divided into ten chapters. iDVD 6 automatically created motion icons for each of the ten chapters. For ease of editing, I have turned Motion off for now.
    I can click once on each icon, and a slider appears above it that allows me to set the starting point for that icon's movie. The problem is that I can't finely select the starting point I want. Even if I move my mouse the shortest distance possible, the video jumps by about one minute increments. Same thing when I use the right or left arrows on the keyboard. I've tried variations with the shift, control, option and command keys, but nothing worked, and iDVD Help has no solution that I can find.
    Is there any way that I can get the movie sliders to move in much smaller increments, preferably frame by frame? Thanks!

    I never found out anything on this, so I just finished the project as best I could. Now I have Final Cut, and doubt I'll use iDVD again. Good luck!
    Fred

  • Structural data as start point

    Hi Experts,
    I have a web service which has a complex type input and output. However, in the start point element, I cannot define a structure data type. On the other hand, if I drag a table view for the web service output and drag an end point element, the end point element will automatically generate the structural view. How can I solve it?
    Best Regards

    Sorry, Let me clarify my question.
    Firstly, I have a web service which has a complex data type input. For example:
    <product></product>
    <supplier>
       <name></name>
    </supplier>
    This web service allows consumer to get multiple suppliers' quotations. I want to integrate it into guided procedure. Hence, I drag a "start point" in VC and right click on it to define data. However, I cannot define structural data type which will pass multiple suppliers to the web service. How can I achieve it?
    Best Regards

  • How do you move a track region in Garage Band to a new starting point without altering the existing length of the track?

    How do you move a track region in Garage Band to a new starting point without altering the existing length of the track? Thanks.

    What exactly are you trying to do? You can drag any region by grabbing it in the middle of the upper area with the highlighted name of the region. However, if you move it towards the end of the track, the length of the track will get longer, to accommodate the extra part of the region. DO you want to speed up the region, to shorten it or do you want to trim it? You can simply grab the right margin of the region and drag it, to make the region shorter.

  • The video file jumping to the start point.

    Hello, Is anyone know why the video file, when he get to the end he is jumping to the start point, And Is there  any way to prevent this?
    thanks a lot
    anat/

    Hi Anat,
    Can you please confirm complete version of Adobe Captivate (Help > About Adobe Captivate).
    How have you inserted the video? multi slide synchronized video or event video?
    Is it jumpiing to the start point of the video or the start of your project?
    In which format have you published your output?
    Thanks.

Maybe you are looking for