Slideshow Starts When Clicking Trigger in Composition Widget

When inserting different slideshows into a composition widget (different slideshows placed within different targets), have the slideshows start from the beginning when the corresponding trigger is clicked. The slideshow would play in order, starting with the first slide, when the trigger is clicked rather than have it playing continuously when viewing other targets.

This seems like a no-brainer. I mean why would we want all slideshows to start at the same time when you're only viewing one at a tme. WHen I click from one slideshow to another, it should start from ONE! Muse staff....any ideas?!!!

Similar Messages

Firefox stops responding and some times dose not start when clicked on alot!

fire fox 9 stops responding for long periods and some times dose not load when clicked on. Also please note fire fox refuses to load the comments section on Yahoo.com under the news tab. The little wheel on the bottom of the page just spins and spins and never loads this area of the page.
I think i know why but wonder since i have had issues with fire fox in the past with the whole not responding and load issues.

Firefox which stops responding after some time is a BIG problem. You're not the only one. The problem seems to be with sites which require Java. The problems I seem to have spotted is this : You visit a web site which needs Java so Java asks Firefox for the amount of memory needed and this is lent to JAVA. However, when you leave that web site, Java is naughty in that it doesn't give back the memory borrowd. Firefox then has to consume a lot of memory to the point that the whole computer system grinds to a halt as you have run out of memory.
Search in the forums for high memory or RAM and you will see many threads. In fact, when you first install Firefox it will ask if you want to send anonymous data about the memory usage!!

Adobe Audition 3.0 Delayed Start When Clicking "Play"

When I click "Play" or hit the space bar to play back an audio file, the green play arrow lights up immediately, but the playback line doesn't start moving to play the audio for about 1 or 2 seconds. I use Audition to play back prerecorded phone calls on the air, and it would be nice if I could tighten up this delay in playback. I am using Windows 7 Pro 32 bit. Any help would be greatly appreciated.
Thanks!
Ron

After scouring the internet, I found the solution to this problem and thought that I would share it with anyone that might be interested. The solution is clearly shown in this YouTube video - How to Fix Lag in Apps Like Adobe Premiere, AfterFX, Vegas, Photoshop, etc. (Windows) - YouTube

Firefox won't start whenI click on the icon; info on help page doesn't help

I have Windows XP and Verizon Internet Security Suite. I've installed Firefox twice (with an uninstall in between) and it still won't load when I double-click on the icon. It runs fine on my other laptop with same OS and same anti-virus/firewall. Info on help page doesn't actually address this problem, even though the headline indicates it does.
== This happened ==
Every time Firefox opened
== Firefox has never actually opened. I double-click the icon and nothing happens. Check task mgr, it's not listed. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.0.3705; .NET CLR 1.1.4322; Media Center PC 4.0; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

See my update at 6:46PST - having the very same problem on a MacBook Pro. Someone named "Sherry" posted around 5:42PST w/ same problem. No techies are picking up on these posts, though. Please add a comment to mine as well to keep it at the top and see if we can get some visibility to what is obviously a bug.
Did you upload a new version/update? That is what caused my problem

Installed Photoshop Elements 10 Program will not start when click on Icon cannot find exe file

I had a trial version which uninstalled I have purchase copy of Photoshop Elements 10 and installed on my computer which is running windows 7 the set up stated it had finished the setup. When you click on the Icon a message comes up saying it cannot find Photoshop Elements 10.0 exe

Go To the below locations and run the exe files manually and check if you ae able to launch the applications.
C:\\Prog Files\Adobe\Photoshop Elements 10 and run PhotoshopElementseditor.exe
C:\\Prog Files\Adobe\Elements10 Organizer/PhotoshopElementsOrganizer.exe
In case you are still not able to find the exe files on the above locations, re-install PSE 10 again as it might not have been installed.

Internet Explorer starts when clicking on Firefox.exe

Whether through the desktop shortcut (which points correctly to firefox.exe in the right folder) or through the exe itself, Internet Explorer starts instead of Firefox.
Asking for a default browser from IE did nothing, as did changing the default setting for the OS (Windows 7). Re-installing to the latest version of Firefox did not work. IE was current. "firefox.exe" does start up in Task Manager and can be shut down that way.
There are no error messages and no new add-ons were installed in Firefox before this happened.
Haven't heard of anything like this before.
== This happened ==
Every time Firefox opened
== Cannot recall any settings changing.

He did add the Broadsoft toolbar. We disabled it in IE (couldn't uninstall it) and uninstalled the Outlook add-on then restarted. This didn't take care of the problem.
My problem seems different than any of the ones posted. As Firefox does NOT start a browser window at all; instead IE starts a browser window.
The toolbar was designed for IE and was not installed on Firefox. Also, my boss said the problem was there before this toolbar was installed.

Stop outlook from starting when clicking links in safari

In the past I used to work with Outlook for Mac (my former company worked with Outlook).
For a couple of years I switched to working with the Mac Agenda, Mail, Contacts, etcetera.
But whenever there is a link in Safari for opening an agenda, or a contact, it is Outlook that is being opened and not the native Mac programs.
How can I change these setting, I've looked but am not able to find this option.
I've got Outlook still on my Macbook because I have to maintain a backup of the email of the former company.
Outlook is set to not be the standard for Mail, Agenda, etcetera so this is not the solution (unfortunately...).
My laptop is up to date, so I'm using all the latest software versions, except for Outlook (this is the 2011 version).
Thanks in advance for the help.
Pascal

Try this:
Open MS Office Outlook 2011 for Mac >> Preferences >> General tab >> uncheck Set Outlook as default program for email, contacts and calendar.

'Blank' and 'Tooltip' Composition Widget disappearing

I have created a slideshow of sorts using the 'blank' composition widget (also tried 'tooltip comp'). I chose to use this so that I can add interactivity eventually and link text. Everything is working fine, until I start scrolling down the page. Once the composition is about half-way underneath my top menu, it completely disappears and no slides are visible. I've checked my scrolling/opacity settings and cannot for the life of me figure out what is triggering this. Any and all help would be greatly appreciated! The composition I'm referring to is the first one that appears on the page, just as the top menu drops down and contains a slide that says 'connect'.
http://www.matthewwilledesign.com
Thanks in advance!
-Matt

Place the trigger where it should be and rearrange the sequence of the triggers by changing their stacking order: Rightclick the trigger and choose "Arrange/…". The most backward trigger is the first one to open.

How To Handle With Back Ground JOB From WEBUI When Click On "Appove"

Hi
How To Scheduled A Job Through ABAP Report In back end Of CRM when i click on "Approve" Button in WEBUI From result list.
As per My requirement I have a Search View and Result View
In Search View I have Below Fields
ITC Vendor ID
Claim Status
User status (date status changed)
Model
Serial Number
Date completed of Service Completion
Based on Search Criteria I will get Result In Result View.(Suppose 10 Records I got In Result View)
In the Result View I need to Add one Button As "Approve"
When i Click On Approve button One Pop up Message Need to Open And In that popup window I need to Display Below Text
"Approve Claim Job Has Started In Background
Note: Only Claims Which are in Submitted Status Will be Approved. you May Close This Window"
In SAP CRM System Back Ground Job Need To Start When Click On "Approve" Button In WEBUI .
In the Back Ground ABAP Report which will validate based on Result List Records"
In the Result List we may have all types of Claims which are status in "Submitted" "Pending" "Rejected" "Approve".
I need to collect all records from Result list and validate Those Records who's Status in "Submitted
1)Sort all the claims based on ITC Vendor ID.
2)Grouped all the submitted claims against each ITC Vendor ID from the search result
3)Change the status of the selected submitted claims to Approved.
4)Displays information messages as mentioned whenever a claim is approved, the same message will be captured in the job log.
‘Claims <ClaimID 1>,…<ClaimID N> now approved for ITC Vendor ID’.
5)Sending Email to each IRC.
6)Capture all the approved claims in the below format (Format Attached "Screen Shot Attachment")
7)Store the file in the Application Server AL11 in .csv format
Please Find Attachement For Reference.
1)ITC Claim Screen Shot
2)Screen Shot For Attachment
Thanks
Raj

Hi,
You can add the following code in on approve method to show popup to the user,
IF req_edit IS NOT BOUND. " gloabl attribute in impl class of the view
    REFRESH lt_buttons.
    lss_button-id = 'btnyes'.
    lss_button-text = 'YES'.
    lss_button-on_click = 'YES'.
    APPEND lss_button TO lt_buttons.
    CLEAR lss_button.
    lss_button-id = 'btnno'.
    lss_button-text = 'NO'.
    lss_button-on_click = 'NO'.
    APPEND lss_button TO lt_buttons.
    CLEAR lss_button.
    CALL METHOD comp_controller->window_manager->create_popup_2_confirm
      EXPORTING
        iv_title          = 'ATTENTION'
        iv_text           = 'Are you sure you want to edit this document?'
        iv_btncombination = '99'
        iv_custombuttons = lt_buttons
      RECEIVING
        rv_result         = req_edit.
    req_edit->set_on_close_event( iv_event_name = 'EDIT' iv_view = me ). "#EC NOTEXT
    req_edit->open( ).
    RETURN.
ELSE.
    lr_node ?= req_edit->get_context_node( 'OUTPUTNODE' ).
    lv_outbound = lr_node->get_event_name( ).
* CLEAR ptc_pricing_status.
*    lv_outbound = req_edit->get_fired_outbound_plug( ).
    IF lv_outbound = 'YES'.
you can use the submit report code here and you can al the validations here
    ELSE. " No
if user clicks no nothing to do..
    ENDIF.
    CLEAR req_edit.
ENDIF.
Best Regards,
Dharmakasi.

How can I make a specific page open in a new window when clicked from a menu?

Don't know if its possible but I have one specific page I want to open in a new window in the browswer when clicked on from a widget menu. I know how to go in and put the coding in but it would be nice if there is some option in Muse to do that already. Any suggestions? Thanks for any help.

ryanj4799 You'll need to change the Menu Type to Manual in the widget's options and add the links yourself. Then go to the Hyperlinks panel. Check the option to open in a new tab/window.
David

Slideshows within composition widgets

Is it possible when inserting different slideshows into a composition widget (different slideshows placed within different targets) to have the slideshows start from the beginning when the corresponding trigger is clicked? I'd like the slideshow to play in order, starting with the first slide, when the trigger is clicked rather than have it playing continuously when viewing other targets.

Hello,
Unfortunately it is not possible to start the Slideshow when the Composition Trigger is clicked.
All the slideshows with Autoplay option enabled start as soon as the page loads.
I would suggest you to post this as a feature request on our "Ideas for features in Adobe Muse" section of the forums : http://forums.adobe.com/community/muse/ideas
Regards,
Sachin

Slideshow within composition widget - 100%width image causes bug

Hi community,
I asked once before for a solution.
Tried to solve it by myself, but everything I tried didn't change the problem and no one posted something similar.
I placed a combination of a composition and a slideshow widget at my site because I want to have
- triggers on which you can klick
- 100% width images
- the background images of the middle part of the site should change together with the slideshow image
So I placed in every target of the composition widget a slideshow with only one image (set to 100% width) and the other elements.
When I start the preview in the browser (Safari+Firefox), the images of the slideshow are set to 100% indeed, but the most times during the slideshow they are shifted to the right (always to the position where the other content starts),
or - if I have a very small browser window - they are shifted to the left.
In that moment I change the size of browser window a bit, they switch back to their 100%width look.
Can anyone help me?
Add some screenshotsr better understanding
If I set the images not to 100%width it works well.
Thanks
nadine

Did you find an answer to this? If so, it would be great to see what you found.
If not, I've come up with a workaround although it's not the best designed solution, but it works.
First an explanation. Although I didn't spend enough time researching Adobe Muse generated JavaScript for all the details, I found that the slideshow seems to correctly dynamically set its pixel width to a width that spans the browser window, however the css left property is not always dynamically adjusting properly and therefore shifts the image off of the screen. This appears to be something buggy or unintentional with the Adobe Muse generated code.
So to solve this, the workaround is to keep triggering the window resize event so that the left property updates through the Adobe Muse generated script. It would be better of course to trigger this only when the slideshow changes. Or would even be better if the Adobe Muse team fixes the bug as well as makes it easier to create 100% width compositions so that the slideshow workaround is not even needed.
In the meantime, here's how to implement the fix:
1) In Adobe Muse, go to the page that your slideshow exists on
2) Object > Insert HTML...
3) Paste the below JavaScript
<script>
function triggerResize() {
//trigger resize event
if (document.createEvent) { // W3C
    var ev = document.createEvent('Event');
    ev.initEvent('resize', true, true);
    window.dispatchEvent(ev);
} else { // IE
    document.fireEvent('onresize');
//call the trigger evey 100 milliseconds
setInterval(function () {triggerResize();}, 100);
</script>

Basic Composition Widget HIDE TARGET on CLICK not working on PHONE layout?

Hi all this relates to behaviour with basic Composition widget when in PHONE layout - When all elements set to HIDE TARGET on CLICK in the PHONE layout a 'click' on the target does not hide it...
APPLICATION
Using a basic composition widget [single trigger] for the PHONE menu drop down.
Everything works except clicking on an item in the target area does not hide the target.
Important because I am kinking to anchors on the same page - the links all work - the page scrolls behind the menu!
It's PHONE so can't use Hide on "Roll Out"

Hello,
You would need to make sure that all the containers (Targets and Triggers and the Container inside which the Triggers reside) have a reduced width in order to have a reduced width of the whole slideshow.
In case you are still facing issues, please provide us some screenshots where we can check the issue.
You can also contact our chat support using the steps mentioned in the article : http://helpx.adobe.com/x-productkb/policy-pricing/support-options-muse.html
Regards,
Sachin

I want a slideshow that when any individual image is clicked on it goes full screen

Right now I have a slideshow that only fills the centre of the page, which is how I want it. I do not want a fullscreen slideshow. However, what I want is that when anyone clicks a particular image within this slideshow, that image becomes full-size and covers the rest of the site, and to get back to the normal slideshow you just click around the image (I guess a similar thing is how photos are viewed on Facebook after a thumbnail is clicked, that is sort of what I want).

Try using/experimenting with the Lightbox Composition Slideshow Widget.

How can I change the order of thumbnails so it affects the order in the lightbox when using the composition widget - lightbox display?

Hi, I'm making my portfolio in Muse, and I'm using the composition widget - lightbox display. I imported all the images and then I wanted to reorganize the thumbnails - and when I do that, the order in the lightbox doesn't change and so it's not the same as the order of the thumbnails (after rearranging them). Please let me know if there is a way to fix this quickly, or do I have to do it all one more time

The order the items display in a composition widget is the front to back order of the items. You can rearrange the stacking order of the thumbnails/triggers using the Layers panel and/or the Object > Bring To Front, Send To Back, etc. menu items to adjust the order they're displayed during auto play or when clicking the next/previous buttons.

Slideshow Starts When Clicking Trigger in Composition Widget

Similar Messages

Maybe you are looking for