Slideshow with music I would like to add bonus commentar

Hi, I created exported a quicktime slideshow with music from iPhoto and imported it into iDVD. What would be a way to add the option to the dvd to listen to audio commentary about the slideshow. I imagine this would work like a regular film dvd where the bonus features section has an option to turn on
"director commentary" Any ideas? THANKS

G'day RittDog
It's relatively easy if you're prepared to spend the time doing it.
• First, forget about the slideshow option. Instead, open up an iMovie project and import your slides into it (ensure you're first set to NTSC for the US of A). Use the Ken Burns effect if you want. Also, add transitions between slides. Unlike the slideshow, you can use different transitions for each slide if your tastes run to it. Don't forget to set the required time for each slide.
• Add your music track(s)
• Now, using something like Audacity (it's free), record your voice over tracks (one per slide) for each slide (you do have a microphone/iSight don't you?). Set Audacity to 48,000 Hz by the way. Trim the tracks, or select the appropriate part. Export the trimmed tracks or the selection as AIFF files to a folder.
• Import the AIFF files into itunes, and use from there, or open the AIFF folder into the media/audio window, or simply drag & drop them. Place them into the middle track in iMovie. Arrange each voiceover to it's appropriate slide.
• Dampen the music during each voiceover, or for the whole show.
• Export to iDVD, burn as disk image.
• If you really, really want to have the voiceovers as a choice, export a Quicktime movie WITHOUT the voiceovers (untick them via the box alongside the right of the track), and then export again WITH the voiceovers (different name of course). Import the two movies into a suitable iDVD menu, with a button for each.
Regards
Santa

Similar Messages

  • I have a 60 Gig ipod. The first one you could put pictures on. I have about 30 gigs of music I would like to add to itunes on new computer. Old pc is not available. Can I do this?

    I need help moving music off ipod classic to itunes on windows 7 pc. Old computer is not available.

    Yes. See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
    https://discussions.apple.com/thread/2452022?start=0&tstart=0
    B-rock

  • I recently purchased a new laptop and have some music on it that I would like to add to my iphone. And vice versa so I can sync them.  What is the best way?

    I recently purchased a new laptop and have some music on it that I would like to add to my iphone. And vice versa so I can sync them.  What is the best way?

    iDevices are not backup devices.
    Copy the ENTIRE iTunes folder from the old computer or the backup of the old computer to the new computer, then sync the device to the computer.
    Attempts to sync the device to the new computer will remove all content from the device and replace it with content from the new computer/library.

  • HT2589 I have two Apple ID accounts, with which I purchase music,  I would like to consolidate those accounts into one, how can I do it?

    I have two Apple ID accounts, with which I purchase music,  I would like to consolidate those accounts into one, how can I do it?

    Stop using one. Everything you've previously purchased from it has that Apple ID stored inside the file, which can't be changed.
    (66245)

  • I own a MAC Pro 3,1 (early 2008) and am running Mavericks 10.9.3 with no problems. I would like to add an I/O card to add USB 3 functionality or ESATA functionality but am unable to find a compatible card. As such my question...can I do this and if so wha

    I own a MAC Pro 3,1 (early 2008) and am running Mavericks 10.9.3 with no problems. I would like to add an I/O card to add USB 3 functionality or ESATA functionality but am unable to find a compatible card. As such my question...can I do this and if so what is the best card?
    Thank you

    Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?
    Also see:
    https://discussions.apple.com/thread/6282459?tstart=0

  • What slideshow with music maker program will run on Mac Powerbook G4?

    What slideshow with music maker program will install and run on my Mac Powerbook G4 1.5.8 1.33 GHz OSX  laptop? Or are there any out there, I know my system is old but it's all I got for now.

    There are many ways to produce slide shows using iPhoto, iMovie or iDVD and some limit the number of photos you can use (iDVD has a 99 chapter (slide) limitation).
    If what you want is what I want, namely to be able to use high resolution photos (even 300 dpi tiff files), to pan and zoom individual photos, use a variety of transitions, to add and edit music or commentary, place text exactly where you want it, and to end up with a DVD that looks good on both your Mac and a TV - in other words end up with and end result that does not look like an old fashioned slide show from a projector - you may be interested in how I do it. You don't have to do it my way, but the following may be food for thought!
    Firstly you need proper software to assemble the photos, decide on the duration of each, the transitions you want to use, and how to pan and zoom individual photos where required, and add proper titles. For this I use Photo to Movie. You can read about what it can do on their website:
    http://www.lqgraphics.com/software/phototomovie.php
    (Other users here use the alternative FotoMagico:  http://www.boinx.com/fotomagico/homevspro/ which you may prefer - I have no experience with it.)
    Neither of these are freeware, but are worth the investment if you are going to do a lot of slide shows. Read about them in detail, then decide which one you feel is best suited to your needs.
    Once you have timed and arranged and manipulated the photos to your liking in Photo to Movie, it exports the file to iMovie  as a DV stream. You can add music in Photo to Movie, but I prefer doing this in iMovie where it is easier to edit. You can now further edit the slide show in iMovie just as you would a movie, including adding other video clips, then send it to iDVD 7, or Toast,  for burning.
    You will be pleasantly surprised at how professional the results can be!
    To simply create a slide show in iDVD 7 onwards from images in iPhoto or stored in other places on your hard disk or a connected server, look here:
    http://support.apple.com/kb/HT1089
    All above suggestions will work on a PPC Mac running Leopard.

  • Have a 3350 and would like to add it to my network. Do I need to make IOS changes?

    In my home network I have a number of netgear gigabit unmanaged switches.  My Firewall/Router acts as DHCP and DNS.
    I would like to add a Cisco 3550 to segment the network and put all of my Tivo IPTV equipment on for fastest throughput. Not Vlan, just a physical where all the Tivo traffic from the DVR to all of the streaming devices will be on this switch and will not need to traverse the other network switches
    As a test I plugged the 3550 into the network and then threw a workstation into the switch as well.  I wasn't sure if the switch would do auto x over but it did and it appeard to work.  I was able to get to the internet from the PC connected to the switch.  When I tried to access my NAS from the computer it did not work.
    I'm wondeing if I have to make any configuration changes to the switch in order to do what I'd like?  Since everythig I use is unmanaged I don't have a lot of experienece with managed devices and it's been years and years since I've done any IOS (is it even still called that?) configuration.
    I'm sure there are firmware updates for this switch it's been in a box for many years.  Can I obtain firmware for this switch without any sort of subscription?  If so, can you point me in the right direction.
    Also, how do I get into this switch once it's on my network?  Is there a web interface?  SSH? or do I have to use the console port?  It doesn't show up on my network as an IP address like some of my other gear does.
    Would this work plug and play?
    Thanks,
    Roveer

    I don't think iTunes can do that.  Your best source for finding out how is to search on Facebook. It will probably involve some sort of formatting for audio files you upload.
    I presume when you say "my music" you really mean it is your music -- you singing and playing the guitar or something.  Web sites are getting very wary of posting of copyright media.

  • Can I drop an IMovie Slideshow with music into IDVD?

    Hello,
    I created (and it took a long time) a slideshow with music using IMovie. Now I want to burn it to a DVD and am realizing I need to put it into IDVD. I saved it to my desktop and then dropped it into the IDVD Magic program but it does not save the slideshow. Or if it does, I can't seem to figure out how to play it. I also can't figure out how to choose the picture for the IDVD theme page. Any help with how to burn my IMovie slideshow on a DVD using either IDVD or some other way, would be greatly appreciated. Thank you!

    Or if it does, I can't seem to figure out how to play it.
    Click on the "Preview" button in the bottom left corner of the iDVD window. For more details go to iDVD Help: >_Making a Magic iDVD_
    I also can't figure out how to choose the picture for the IDVD theme page.
    Once you have added your slideshowGo to Help: _Adding images and movies to drop zones_
    Any help with how to burn my IMovie slideshow on a DVD using either IDVD or some other way, would be greatly appreciated.
    I am not familiar with the workings Magic DVD, but if you have already created the slideshow, it might be just as easy to follow the regular route in making this project. If you wish to try this, follow these steps.
    1. Open iDVD, select to create a new project, and name it.
    2. Select the theme.
    3. Import your slideshow into iDVD. Go to your movies folder (or wherever your project is saved), and drag the iMovie icon (the one with the star) to the window of your iDVD project. Avoid drop zones.
    4. You can add photos to the drop zones by clicking on the "Media" Button in the bottom right corner, and then on "Photos". Just drag and drop the photos to their desired location.
    5. Preview by clicking on the triangle at the bottom of the window.
    6. When you are ready to burn, first go to File>Save as disk image. This will allow you to have a final check of your project before burning to DVD. You can see how this project will actually play when played on a regular DVD player. If everything is fine, you can then burn the DVD using Disk Utility.
    I hope this helps.
    Message was edited by: Glo H

  • I bought Elements for a specific purpose...to create a slideshow with music.

    DOES the new REVEL include CREATING A SLIDESHOW WITH MUSIC?  This is the reason I bought ELEMENTS to begin with.
    I am not interested in I PADS, CELL PHONES or any other internet media.  I need the SLIDESHOW/MUSIC feature of my original ELEMENTS.      CAN YOU HELP?     Thank you, Kathy

    kitt6549 wrote:
    DOES the new REVEL include CREATING A SLIDESHOW WITH MUSIC?  This is the reason I bought ELEMENTS to begin with.
    Hi,
    I'm not sure about how you came to the idea that PSE would help you create slideshows with music. To do that seriously, you need a more specialized software like PicturesToExe for example : http://www.wnsoft.com/picturestoexe/ (I have no relationship with this company but I have seen what my fellow photographers are doing with this software).

  • Slideshow with music keeps stalling

    My Aperture slideshow with music keeps stalling in various places.

    G'day RittDog
    It's relatively easy if you're prepared to spend the time doing it.
    • First, forget about the slideshow option. Instead, open up an iMovie project and import your slides into it (ensure you're first set to NTSC for the US of A). Use the Ken Burns effect if you want. Also, add transitions between slides. Unlike the slideshow, you can use different transitions for each slide if your tastes run to it. Don't forget to set the required time for each slide.
    • Add your music track(s)
    • Now, using something like Audacity (it's free), record your voice over tracks (one per slide) for each slide (you do have a microphone/iSight don't you?). Set Audacity to 48,000 Hz by the way. Trim the tracks, or select the appropriate part. Export the trimmed tracks or the selection as AIFF files to a folder.
    • Import the AIFF files into itunes, and use from there, or open the AIFF folder into the media/audio window, or simply drag & drop them. Place them into the middle track in iMovie. Arrange each voiceover to it's appropriate slide.
    • Dampen the music during each voiceover, or for the whole show.
    • Export to iDVD, burn as disk image.
    • If you really, really want to have the voiceovers as a choice, export a Quicktime movie WITHOUT the voiceovers (untick them via the box alongside the right of the track), and then export again WITH the voiceovers (different name of course). Import the two movies into a suitable iDVD menu, with a button for each.
    Regards
    Santa

  • I would like to add my Deskjet F4480 printer to my home wireless network. How can this done?

    I have a Linksys wireless router that is the hub of my home wireless network.  I have been successful in adding a HP OfficeJet 6500 All-in-one Printer an old HP DeskJet 890C that I purchased in 1997 with a computer running Windows 95.  The HP 890C has been my tireless workhorse throughout my two kids K-12 school as well as printing reams of paper during my MBA...and guess what: it still works.  However, my daughter has just returned home from college and she has a HP DeskJet F4480 printer/scanner that she would like to add it to the home network.  I have been researching the problem, but haven't been successful in finding out if this printer is compatible to add to a wireless network.  Or simply, will a 802.11g Wireless USB 2.0 Adapter suffice?  I am also adding a new Windows 7 laptop in the network, that will need to print to this F4480.  I patiently await the forum's response.

    My mistake, it seems that price was a deciding factor when I purchased the F4480 in lieu of a more expensive wireless ready printer-scanner.  I will eventually come-up with a solution as I did with the 890C where I have a wireless print server connected directly to the printer serial connection.  It seems that backward compatible is still evident, but I am having some problems coming up with the long-lasting HP49 and HP23 tri-color ink packs. 
    Here is the rub; I don't replace technology because it is out-dated. I upgrade and or repair everything myself. I found warranties not worth the paper their written on and in most cases, the technical support was lacking.  My Win95 desktop went thru several major components until I found that it was becoming harder to find software to run with it.  I finally replaced it in 2007.  Now it seems that there has been a paradigm shift toward utilities that are very hungry for memory, and even if I didn't want to, I am forced to come over to the dark side with a device that has a minimum of 8GB of RAM. 

  • I would like to add a new Canon camera profile to the RAW interface

    Hi,  I would like to add a new Canon camera profile to the RAW interface.
    I have recently installed the new camera profile 'Studio Portrait' which i download from here:
    http://www.canon.co.jp/imaging/picturestyle/file/studio-portrait.html
    When I open up a RAW files in Camera RAW, go to 'Camera Calibration', click on the drop down list called
    'Camera Profile'  I only see  'Adobe Standard, Faithful etc etc'.
    My questions are, can i add the same camera profile i put in my camera, into a folder with in photoshop?
    Or is photoshop reading the raw file and only seeing the default camera profiles?
    If I could see the new camera profile listed it would help with work flow.
    Best
    JL-B
    Please help, ive not had a good time waiting on the phone and trying to explain this to a live chat, hours have been wasted. Once i know the answer I can get back to the commission.

    Are you following this
    Apply a camera profile
    To apply a camera profile, select it from the Camera Profile pop-up menu in the Camera Calibration tab of the Camera Raw dialog box. The Adobe Standard profile for a camera is named Adobe Standard. Camera Matching profiles include the prefix Camera in the profile name. The Camera Profile pop-up menu displays only profiles for your camera.
    If the only profile in the Camera Profilemenu is Embedded, it means that you have selected a TIFF or JPEG image. Adobe Standard and Camera Matching profiles work only with raw images.
    Note:  If you have selected a raw file and Adobe Standardand Camera Matching profiles do not appear in the Camera Profilepop-up menu, download the latest Camera Raw update. 

  • I would like to add skype on my 2g ipod touch.  It says I have to have a 4.3 iOS.  How do I get that?

    I would like to add skype on my 2g ipod touch.  It says I have to have a 4.3 iOS.  How do I get that?

    first get  and an old version of skype than go C:\Documents and Settings\My Documents\My Music\iTunes\iTunes Media\Mobile Applications and paste the old version of skype and then change the type file to itunes ones than sync and enjoy...

  • I would like to add a "i like" FB bouton in my e-mails. how can I do that?

    I sent order confirmations to my clients and would like to add an "I like" bouton to my facebook site from my mac e-mail. How do I do that?
    Best regards
    Katrine

    Select the text you want as a link > Inspector > Link > Hyperlink > Enable as hyperlink > Link to webpage > URL: your facebook site
    That will take you to the site but not click the button (bouton had me thrown the first time) for you.
    If you want more than that you'll have to fiddle with it.
    Peter

  • I bought an old iPod touch It is 6.1.6, i would like to add a new icloud account but it can't let me. this iPod touch belonged to another person and i don't know where is he can you tell me please how to add a new icloud account??

    I bought an old iPod touch It is 6.1.6, i would like to add a new icloud account but it can't let me. this iPod touch belonged to another person and i don't know where is he can you tell me please how to add a new icloud account??

    The 4G/iOS 6 does not have an Activation Lock. That started with iOS 7.
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:                                                             
    iTunes: Restoring iOS software

Maybe you are looking for