Slideshows created with earlier iPhoto don't run properly in iPhoto 11

I built some nice slideshows with my previous iPhoto. When I run them in iPhoto 11, some pictures show up blank and the timing to the music is off. Can I get my shows back to the way they were without having to completely rework them?

Basically, you want to burn at 4x or lower for your DVD disk in order to minimize errors and be campatible with the most consumer DVD players. Some of the older DVD players have trouble with the higher burn speeds, and sometimes poor disk media can cause difficulties. Maxell or Verbatim DVD-R disks are the recommended media.
iDVD doesn't let you set burn speeds, but you can do it by using Roxio Toast or by burning your iDVD project via the Applications/Utilities/Disk Utility application on your iMac hard disk. The recommended procedure is to save your iDVD project to a disk image (an option in the File menu). All the encoding will take place as if you were burning a disk. When the disk image is completed, you can play it back on your screen using the DVD player application on your hard disk. The playback will display exactly as it would if you had burned a DVD disk. If everything is satisfactory, open your Disk Utility application in the Utilities folder. You will see your newly created disk image as an .img file in the pane that pops up. If it's not there, drag your disk image into the pane. Then select the disk image. Insert a DVD-R disk. The "Burn Options" will change to 4x speed. (Use 2x if it offers that option.) Click "Burn", and the disk will burn fairly quickly, because all of the encoding already has been done. Then see if your disk will play on your TV/DVD combo. You could also take it to a consumer electronics store (like Frys or Circuit City) and try playing the disk in several DVD players to check for compatibility.
I don't know anything about Final Cut, but I doubt that your use of that program is causing any problem because you were able to create a successful disk that played on your iMac DVD player. The issue is probably with your TV/DVD combo player.
There are experts on this forum more knowledgeable than I, and perhaps they will offer additional comment.

Similar Messages

  • Slideshow created with iphoto will not burn with idvd

    I cannot seem to burn dvd using idvd.  slideshow created with iphoto

    I'm having the same problem after upgrading to 10.3.9 and iphoto 4.0.3. Read below:
    Until recently I was running 10.1.5 using iphoto 2 to burn folders of photos within a library. After upgrading to 10.3.9 and iphoto 4.0.3 I get a message: “The burn to the ARCHOS MiniCDRW XS8432 drive failed. The device failed to respond properly, unable to recover or retry.”
    Actually, I got another message before I installed patchburn 3.1.2. After installing patchburn 3.1.2 for 10.3.X, system profiler recognized my burner and says it is supported but the above message is displayed after the program has stopped the process.
    Toast Titanium 5.2.1 burns CD’s just fine but when a CD with an iphoto library is inserted into the CD-ROM the iphoto program will not recognize it. In other words, it won’t show up in iphoto as an iphoto library or anything for that matter. Maybe there’s a way to do this in Toast or maybe I need something else to make iphoto work with my burner.
    Can anybody help me? Thanks!

  • Itunes will not open, message says library was created with earlier version. what now?,

    itunes will not open, message says library was created with earlier version. what do i do?

    Unless you just attempted to downgrade iTunes to an earlier verison this is probably a sign of a corrupt library.
    Empty/corrupt library after upgrade/crash
    Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping.  Note that in iTunes 11 an "empty" library may show your past purchases with links to stream or download them.
    In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
    Alternatively, depending on exactly when and why the library went missing, there may be a more recent .tmp file in the main iTunes folder that can be renamed as iTunes Library.itl to restore the library to a recent state.
    See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
    When you get it all working make a backup!
    Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device.
    I've noticed more of these missing library posts of late and a common factor to most since I started asking is AVG Anti-Virus. It seems in some cases it might be at least part of the reason why the library file disappears. Try excluding the iTunes folder from any AV scanning process.
    tt2

  • Closing window of web dynpro application with exit-plug don't run in the EP

    Hi everybody,
    I want to close a window that contains a Web Dynpro with a close button, because it's used and create as a popup from an other iView (that's not created with web dynpros) in the EP. I read the different threads how to close a window in web dynpro, like JavaScript in WD
    I create a HTML file with the javascript code to close the window and it works fine, when I start the application separately.
    If I used it in the portal and click the close button I get the following error message:
    com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Exit-Plug must no be triggered with an URL when running in portal. Use portal navigation instead to navigate to another application!
    I tried also: ...wdFirePlugExit("javascript:self.parent.close();") or some other javascript code, but got the same error message.
    Then I tried:
    WDPortalNavigation.navigateAbsolute(url,WDPortalNavigationMode.SHOW_INPLACE,(String) null, (String) null,(String) null);
    instead of fireing the outbound plug in the action of the close button
    (...InterfaceViewController().wdFirePlugExit(url);)
    but than a new window with the EP open and the old is still there!
    We use the NWDS2004s an the EP 7.00.
    It must be possible to close a (this) window!
    Thanks for any hint
    christian

    Hi,
       This is what you can do:
    1. You have already created the HTML file with the necessary javascript in the foloowing folder structure :
    src->Mimes->Components-><your component name>-><fileName.html>.
    2. Create a new iView of type URL in your portal.
    3. Get the absolute URL of this HTML file inside your project. This will be in the following format:
    http://<server>:<port>/webdynpro/resources/sap.com/<development ComponentName>/Components/<namespace>/<fileName>.html
    You can find it thus:
    try {
    String u = WDURLGenerator.getAbsoluteWebResourceURL(wdComponentAPI.getDeployableObjectPart(),"filename.html");
    wdComponentAPI.getMessageManager().reportSuccess(u);
    } catch (WDURLException e) {
    // TODO Auto-generated catch block
    e.printStackTrace();
    4. Now enter this URL string as the URL for the iview.
    5. Do a normal portal navigation to this iview on-click of the button.
    Regards,
    Satyajit.

  • Logic will not open files created with earlier versions?

    Logic Pro 9 will not open willnot open files created in earlier versions advising that attempts should be mad using Logic pro 7.  My Mac Pro wil not open this version of Logic "because PowerPC applkcations are no longer supported."  Any help would be very much appreciated since I need to have books reprinted.
    Thanks

    Pancenter wrote:
    Won't help, the "installer" (through Logic 8) uses some PPC code, this person is running Lion which means no version of 7 or 8 can be installed.
    Hi
    I think that the PPC installer can be worked around (?):
    Make disk images of the Install Disks, mount them all, then use Pacifist to run the Install process
    Looks like it should work here..
    CCT

  • How do you get photos with alpha channel on to display properly in iPhoto ?

    Yesterday I imported some raw photos from PSE9 to iPhoto 09 (version 8.1.2) in tiff format.  Most of the pictures came out fine, but the ones that had alpha channel on looked more like negatives.  Is there a way to fix this problem?

    Alpha channels of masked areas are not supported or rendered properly by iPhoto.  Alpha layers of selected areas don't seem to be affected.
    Send a feature request to Apple via http://www.apple.com/feedback/iphoto.html.
    OT

  • Can't open projects with Imovie 5 that were created with earlier version

    I can't open my Imovie projects that I created when using Mac OS 9.2 now that I'm using Tiger and Imovie 5.
    I'm not sure what version of Imovie I created them with. Do I need to find an earlier version and open them in the classic environment, or is there some way of converting or importing them?
    iBook G4   Mac OS X (10.4.2)  

    Theoretically iMovie 5 can convert old projects, but projects created in Mac OS 9.2 can be quite difficult, for OS 9 is very different than OS X. More about that here:
    http://discussions.apple.com/click.jspa?searchID=-1&messageID=1677339
    Your best option is to use the version of iMovie that you used originally to edit the project. If the projects are really old, that may require starting up your Mac in Mac OS 9 (instead of running iMovie in the Classic environment, which is Mac OS 9 running inside Mac OS X.)
    Your best solution may be to boot up in Mac OS 9 and use your old version of iMovie to export the project back to the camera, then boot into Mac OS X and import the tape into iMovie 5.
    If you don't have a camera, export to a Full Quality DV movie, then import that movie into iMovie 5.
    The camera will (probably) deliver the clips to iMovie 5 as clips, while the export to a Full Quality DV movie will not.
    By the way, to see which version of iMovie last edited the project, drop the project file on the TextEdit icon in the Dock. The version is shown at the top of the file.
    iMovie 2.1.2 was the first version to run in OS X, I believe. The last version to run in OS 9 had the same version number, unfortunately.
    If your Mac doesn't let you start up in Mac OS 9, then say more about exactly what happens when you try to convert the project. Do you get error messages? What are they?
    Karl

  • How to View PDF slideshow created with Adobe Photoshop Album?

    Many years ago during the Windows ME era, I created several short PDF slideshows with software (Adobe Photoshop Album) that included audio.  I saved them to a flashdrive.  I believe I used Adobe Reader 7 to play them years ago.  I am now running Windows 7 and attempted to open/play the videos and all I could see is the individual slides with no audio.  Is there a way to view these slideshows with audio today?  Some of them have special meaning and I would appreciate any assistance on how to view them once again.  

    Hi there! Because the forum you originally posted in is for beginners trying to learn the basics of Photoshop, I moved your question to the Photoshop Ablum Starter Edition forum, where you'll get more specialized help.

  • Premiere Pro CC 2014 seems to  Corrupt projects created with earlier versions

    I have opened  in PPro CC 2014  projects created in PPro CS6  or PPro CC. Every time  PPro crashed and got the message " PPro Debug Event - PPro encountered a major problem and has stopped working" After that the project seemed corrupted and could not be opened even in earlier versions.
    I get the following message
    Première Pro Debug Event (Title of the window)
    Premiere Pro has encountered an error
    [c:\caravan\releases 2014.09\shared\adobe\mediacore\mediafoundation\api\incK... (can't read the res...)
    Then there is a "continue" button if I hit this button I get the following window
    Following a serious error PPro must shut down. The program will try to record your current project.
    Has anyone encountered this problem?
    I don't dare open any old project. help!

    Hi there!
    I´ve updated to latest version and then opened my project and got this error.
    Then I found in a forum that I should delete the ADOBE folder in \my documents
    I´ve deleted and then I could open the file again.
    But the .MP4 and some other video files doesn´t open.
    I saw that the 'Effect Presets and Custom Items.prfpset' file on \my documents\adobe\premiere Pro\8.0\Profile-myprofilename was causing the error.
    I also saw in other forum that I should rename Adobe folder to old.adobe from \userfolder\appdata\roaming and \userfolder\appdata\local but this hasn´t solved the problem.
    I tried also to reinstall Quicktime and K-Lite Codec Pack but the problem persists.
    Have you found any solution??
    Regards
    Lucas

  • Exe created with labview 2012 won't run using LVRTE2013

    I created an exe using Labview 2012.  I had the user install the latest rte (lvrte2013).  The exe would not run and told the user it needed 2012 rte.  Do users have to have the same rte for each exe?
    Solved!
    Go to Solution.

    Yes.  But the various RTEs can coexist on the same PC.

  • How to get embedded HTML code of slideshow created with photoshop elements 8?????

    How do I get the EMBEDDED HTML CODE after creating a SLIDE SHOW using Photoshop Elements 8?????

    You're welcome. How about awarding them duke stars?
    edit: cheers!

  • Are there any new 17 " MBPs with matte display out which run properly?

    Hallo,
    I am about to buy one 17 MBP with matte display. But now I ve read all these posts and
    I hesitate to order one. I don't want to have all the trouble to send it back and then wait
    again. So, are there any guys who can not report these graphic issues?
    Yours
    Matthias

    CD = Core Duo, the 1st generation of 17" MBP from way back in 2006. It was flawless when I got it. It's still running perfectly 3 years later. Only issue was a bad battery, and that was a known manufacturing problem at Sony that affected Macs as well as PC laptops. Apple extended the warranty to cover the issue, and replaced mine for free ~3 months after my one-year warranty expired. Two colleagues have the new 17" unibody MBP, one with glossy and one with matte, both are flawless.

  • Required Windows updates to run/load dlls created with Visual C++ 2013

    I have dlls created with VS2013 C++. Dlls are statically linked with runtime libraries and therefore do not require the redistributable to run on a machine that does not have VS2013 installed.
    I have a test machine with Win7 SP1 64-bit without any windows updates. When I try to load a dll created with VS2013 in an executable on that machine, the code dies. Another test machine with windows 7 SP1 fully updated using windows updates loads the same
    dll without a problem and the code runs fine.
    My question is which windows updates for Win 7 and Win 8  are necessary for dll created with VS2013 to load and run?
    Thanks. 

    I did use dependency walker. In my post above (third post in the thread) I actually state that: 
    "The code crashes(=dies) on the machine without windows updates. I used dependency walker and there are no missing dlls.
    Even if there were missing dlls, which there are none, those would be system dlls, because a machine with fully up to date Win7 loads and executes the code without a problem."
    The dll is statically linked (/Mt flag was used). For a good measure I installed redistributable which did not solve the problem. Besides static linking applies to runtime dlls, not the system dlls.

  • Why does slideshow created in Elements v12 display black

    A slideshow created in PSE v11 plays back correctly on my Windows 8 computer, but running a slideshow in PSE v12 on the same computer in the same session displays the slides as black. There was a suggestion that the photos are at too high a resolution to playback, but I am using the same photos. I even created a slideshow with only three images that were about 1 meg in size each -- same problem.  There is no error message and the audio does play.
    I imported into the Organizer (PSE 12) three different video formats: wmv, mp4, and m2ts. All three played correctly. It is the slideshow created with PSE that displays black.  What needs to be updated? What steps can I do to correct the problem?

    I think the difficulty is that because it doesn't affect everyone they can't recreate it and so can't fix it*. If you want to report it the place to report bugs is at http://feedback.photoshop.com (this is a user-to-user forum so Adobe won't see it).
    * Mind you with a release cycle of only twelve months it's very rare to see any updates other than to Camera RAW.
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children
    If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

  • Can't use certificati, with version 4, it not run

    for use an bank account, I use an security certificate, but with version 4 don't run, I can't send the certificate, I think that I can send with an normal Email, with an allegato

    I have the same problem.
    I have my sons touch and my iphone. Neither can connect either way since the update to V4.3. It just rings on the outgoing device until it says "Call Failed"
    Both devices have facetime activated
    Skype VC works fine so I know its not the devices or the connection.
    Another new one is in setting up "find me" on the touch it seems to think we are at our old address in I have spoke to my broadband provider and they have the correct postal address and they issue a dynamic IP address.

Maybe you are looking for