Slight gap at corners between LCD and base when closed

Hello,
I just got a brand new MBP 15" the other day and I noticed that when it is closed, the screen is not perfectly flush against the base of the computer. Rather, it is flush where it is latched in the center, and a slightly widening gap expands to the corners, where it is at its widest (about 2mm).
Is this normal, or is the lcd on my laptop slightly warped?
Any input would be appreciated, thanks.

BulletzBill,
It's entirely normal. Nothing to worry about.
Scott

Similar Messages

How to maintain space between value and base unit of measure in sapscript

Hi Guys,
I am working on an upgradtion project, i have problem like while upgrading from 4.6b to 5.0. i need to main a space between value and base unit of measure. can anyone letme know how to maintain in the form. I mean in sapscript.
Thanks,
Yogesh

There are a couple of ways to handle this, if you need a bigger space between, you can use tabs in the paragraph format. Or you can just write the space in between the fields like so.
ZA &MSEG-MENGE& &MSEG-MEINS&
Regards,
RIch Heilman

Huge gap of PIR between PP and APO

hI,
what should I do if I found huge gap of PIR between PP and APO?
When I compare them in CIF, I got error code 312.
Please help, thanks.

What is the application area? Is it APO error or SAP error? Is it only for certain materials/plants or for all materials?

Powerbook alternates between battery and adapter when plugged in

The other day my PB started alternating between battery and adapter when plugged in: the symbol changes from batt to charging every few seconds, brightness goes up and down. I've managed to find a position where it will actually charge. I even tried a new adapter, but it's still extremely temperamental.
I'm afraid there's something wrong with the internal power jack, but is there anything else it could be? Any way to tweak the jack?
Thanks!

No, there's no way to "adjust" the port. It's soldered to a small Sound/DC-In card inside the Powerbook. What's apparently happened to yours is that the cord has been jerked rougly up, down or sideways one time too many, and one or more of the solder joints has broken. Because it's now able to move, however slightly, the rest of the joints are also being stressed every time you connect or disconnect the cord. Sooner or later another will break, then another. You'll end up having to replace the card when you can no longer shim or jimmy the port so it makes proper contact.
If you're very good at very small-scale soldering, you could take the card out and try to repair it, but if you're an average ham-handed Joe like me, replacing the board is a better bet. Getting to it, while not actually difficult, is a pretty considerable adventure in an Albook, because nearly everything else has to be removed from the case first to reach it.

In Mountain Lion how does OS select between ethernet and WiFi when both are activated??

In Mountain Lion how does OS select between ethernet and WiFi when both are activated?? How does OS use "both" networl accesses??

It will pick the highest service in the list which has an internet connection.
To order the list, open Network System Preferences and select Set order of network services from the button below the service list.

What are the configuration need between R3 and XI when we use RFC sync adap

hi,
What are the configuration need between R3 and XI when we use RFC sync adapter.
Regards
siva.

if its the sender adapter ref:
RFC adapter
Sender- /people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
Receiver;
http://help.sap.com/saphelp_nw04/helpdata/en/c8/e80440a832e369e10000000a155106/content.htm
Also;
trouble shooting rfc/soap -
/people/shabarish.vijayakumar/blog/2008/01/08/troubleshooting--rfc-and-soap-scenarios-updated-on-20042009

How does iPad choose between wifi and 3G when both are 'on'?

Easy peasy question.
I have 02 and Wifi going on my iPad. I know I can use 02 out and about and I know I can use wifi at home etc.
But when I'm at home how do I make sure I'm using my wifi for data and not my cellular connection???
I've been turning my cellular to 'off' when at home, just in case, but I don't want to have the faff of turning it off and on, so it would be nice to know how the iPad chooses between wifi and 3G when both data access points are active.
Also I've had no wifi troubles at home at all. so far... The acid test will be setting it up at work as they have proxyies for everything, but obviously I don't have proxies at home. I'm not sure if the settings screen can cope with different proxies dependent upon different wifi networks... * grin *

In the status bar I have
a signal strength indicator then 'O2-UK' then the 'fan' No mention of 3G.
I'm guessing you're going to say that when 3G is showing then 3G is being used for data?

Difference between CS3 and CS4 when placing images, percentage not kept

There is some kind of difference between CS3 and CS4 when placing images. The images I've dealt with right now were vector images but it might apply to all kinds of images.
When replacing an existing image, the CS4 behaviour is to let the image fill up the frame. In CS3 the percentage was set to 100% as default (the % you see when selecting the image, not the container).
Also when replacing an impage in CS4, the "inner" image frame is kept, while in C3, the percentage was kept.
Is there some kind of placement preferences / settings to let CS4 act the same wat as CS3 did, when placing an image?
-- Andreas

Yes, the behavior was changed in CS4 (and many users, like me, prefer the new system).
If you click and drag a loaded image place cursor the entire image will be be scaled to fit the proportionally drawn frame -- a huge timesaver if you mostly place uncropped art. If you want 100% of the image at 100% scale, just click and release -- same as before, or as before you can pre-draw a frame and place into it and your image will come in cropped at 100% (unless you've changed the fitting options for the frame before placing).
Peter

Gap between lcd and digitiser

Any one find the gap between ipad air lcd and digitiser annoying? I mean it could be better if they were one. Sometimes when tapping a little hard on th screen makes sound as if ita hollow inside.

I never noticed it before, but yeah it has a larger gap on the right side than on the left...
But hey, I look at the screen not at the gap. I'm happy to have an anti-glare IPS screen.
| X220 i7-2620M | 12.5" IPS | Intel 520 Series 180GB Main SSD | Mushkin 120GB mSATA SSD | 8GB RAM | Intel 6205 WiFi | BT | Win7 Pro 64 SP1 |

Formation of moisture between LCD and front panel in a iMac

Hi Guys
I am using a 21,5" iMac for the last 18 months or so. Every monsoon (which is pretty heavy in Bombay) I face a strange problem. A few minutes after starting the mac, moisture starts accumulating between the LCD panel and the front glass which covers it. I have complained to Apple several times but there is no satisfactory reply. In fact one of their service center girls sent me this email explaining the reasons behind this problem
Hi , Sir !
Greetings of the day ............
This is with regards of ongoing problem with your iMac display issue.
I have understand it from the technician who have visited your place regarding this issue.Pls correct me ,if your imac display issue is different than belows.
Problem Reported: u see Some fog/condensation forms in that middle or corner of the screen(behind the glass). computer, But after turning it ON a large spot is clearly visible. [Deepak J] Your understanding is Correct .After turning of the computer, The fog disappears in just about 20 or 30 minutes.[Deepak J] No its not correct that fog/condensation goes in 20 or 30 minutes rather it takes more than 8 to 10 hours to get disappear and nature of the problem is intermittent. This is an environmental issue that happens with most of the iMacs here in mumbai during monsoon.it is because of humidity/moisture in the air.mostly it happens if there is a open window right behind the iMac or imac is very close to the AC.[Deepak J] My early PC which I used for more than 5 Years was also kept in the same way / environment in which iMac is Kept & I bought iMac for 4 times more than the Cost I purchased my Old PC.
Since the iMac goes Glass > Space > LCD it wouldn't be totally surprising that condensation would show up there if there is a lot of humidity and the temp variations between the outside of the glass and the inside of the glass.
The space between the glass and lcd is not air tight. The glass is just a "cover" and not affixed to the actual LCD. It's held on by some magnets but there's still air going to and from between the lcd and the section that connects to the glass. It's like when you get condensation/ie., fogged windows in a car. The temp difference the air outside the glass and the air inside the glass as well as both surface sides it's a matter of physics that a fog will appear if the conditions are optimal.
So,only few below things can help u in this case.
1.Keep the iMac On,as much u can.we can keep the system in sleep all the time with energy saver settings.we will help u to do the same.[Deepak J] I use PC for Max to Max 2 to 4 hours in a Week so are you suggesting that I keep the PC on for rest of 160 Hours
2.use of de-humidifier will might help.[Deepak J] Can you please tell me what is de-humidifier ?
3.Removing the glass panel(But not advisable.)[Deepak J] I don’t want to do that
Trust me ,it happens only in rainy seasons where humidity level is very high in our city and there is no technical solution to fix this as imac is design that way.[Deepak J] This the First rainy season after I purchased iMac
Hope,the above information will help u.
Pls let me know ,if u need any more information from our side.--
Thanks & Regards,
Rupali Mandve
Admin Asst.
For
 Unicorn Infosolutions Pvt. Ltd.
301, Kotia Nirman, New Link Road
Andheri (W), Mumbai - 400053
Tel: +91-22-67354000
Mobile :- 9769276811
[email protected]
www.uipl.co.in
Its pretty obvious from this email that they have no clue on how to solve this problem. Combined with the fact that Lion has a lot of bugs, my impression is "Apple is the new Microsoft".
whats your experience guys
best regards
Tejash

Hi Shilpa
Its not the lack of testing. I am sure moisture is a problem in many other parts of the world. More irritating are the 'suggestions' by so called apple experts.
One solution could be to seal it from all sides. Should be a pretty standard job.
best regards
Tejash R Majmudar

How to break the link between photoshop and lightroom when saving a photo?

I've had an ongoing issue with saving copies of photos I import from LR to PS and back into LR. Any multiple copies I make get erased when they move back to LR. My solution has been to save a copy in an extra folder apart from Lightroom and import them in later. It's rough, but it works. But now I have a new demon.
I tweaked a photo in LR, made a copy to keep it safe, then sent the copy over to PH where I did some magic. I Saved As in that special other folder, closed the tab, got the usual box asking if I wanted to save the changes (of course I did), I went back to LR to see both the original and copy changed over to the PS version. I went back to PS, opened the .psd, unclicked the mask, clicked the checkbox, when back to LR and both the original and copy in LR had the mask removed.
I'm missing something here.
There m u s t be a way to break the link between PS and LR so that when I save a copy of a photo I made in LR the original and copy remain two separate photos. Does anyone know how?
Thanks,

I think I am a little confused. What you are describing seems more like a Project Server "Profile" issue, than a SharePoint to MS Project Sync.
If my guess is correct, then you just need to set the default profile to be something other than your computer.
If I am wrong, a screenshot of the error would be really helpful.
Cheers,
Prasanna Adavi, Project MVP
Blog:
Podcast:
Twitter:
LinkedIn:

Speed between server and client when using FML

I using FML between server and client, the server access oracle using only 5 ms, but when tranfer back to client, it about 100ms long. I tuned my hp-ux 11 kernel and tuxedo config file, but useless, Why?

Hi Tumecan,
Your expected information available here, check.
Frontend Network Load - Network Integration Guide (BC-NET) - SAP Library
few related SAP Notes:
164102 - Network load between application server and front end
500235 - Network Diagnosis with NIPING
62418 - Network Load of SAPGUI Frontend Communication
679918 - The front-end network time
578118 - Long response times on the SAP GUI
161053 - Using SAP GUI in WAN
Regards,
V Srinivasan

Difference between Firefox and Safari when viewing iWeb created content.

Greeting Mac fans,
I've noticed that my iWeb pages load 2-3 times faster when viewed in Firefox than Safari. I find this a little suprising.
Also, my hit counter shows when the page is displayed in Firefox, but not in Safari.
Any ideas?
All content was created using iWeb and is hosted at my dotmac account. I have a domain name and I'm also using "masked URL fowarding"
Peace
super_tee
Emac 1.25ghz Mac OS X (10.4.8) Packed to the eyeballs with goodies....

There are two things that I think are at play
here...
First, the difference in loading times between
FireFox and Safari.... I haven't noticed that huge of
a difference myself, but what I have noticed is that
FireFox is much faster at pulling up cached
material....or maybe figuring out whether to pull
from cache vs. anew. I've noticed that FireFox also
hangs on to cached material more tenaciously than
Safari, meaning that sometimes I have to go in and
empty FireFox's cache in order to see something
update...I have to do this much more often in FireFox
than Safari.
Second, about your counters. If you turn your
masking off from your domain forwarding, you .Mac
counters will be visible to all. Using masking will
make them invisible to certain browsers under certain
conditions.
James, I guess I should download and use Firefox, but remember feeling burned the last time I did. I downloaded it, and soon after, things went awry with my computer. I am hoping that the were unrelated events, since Leo Laporte, the KFI techie guru, also recommends using Firefox for various reasons. He says that it is very safe because, basically, it is "dumb" (his words). But he meant that it's lack of bells and whistles made it go very fast, and made it avoid all the problems of Internet Explorer.
Lorna in Southern California

Firefox won't load homepage when launched and crashes when closed.

Last night, while I was in Firefox, a notification popped up that updater.exe had been downloaded. I could easily take a guess: a new version of Firefox was out. I closed Firefox and then had the updater do its thing.
When Firefox then launched & came up with a blank screen (like what you would see with New Tab), I was a little confused. I checked Tools > Options and the general tab was still set to show the homepage when Firefox starts up (Xfinity). I also went through all the other tabs and found that nothing had been changed. It was 18.0, as shown in "About Firefox" so I was scratching my head as to what was going on. Humoring myself, I clicked the "home" Icon, and sure enough it toop me to my homepage. Figuring I'd take a shot at it later, I closed Firefox (The red X in the upper right).
Then things took a stranger turn. Upon closing, the Mozilla Crash Report screen popped up. I figured this was a one-time thing, so I didn't send a report. I launched Firefox again, and again I got a blank screen. Upon closing, the Crash Report screen popped up again. To ensure this was just something with Firefox, I launched Internet Explorer. It showed the homepage upon launch, and didn't crash when closed.
Now, upon getting the troubleshoot information, I discovered another twist: When I go to close one of the tabs, Forefox crashes.
This has me scratching my head. Before I updated, everything was perfectly fine. Now I run into this. Any thoughts?

Alright, I just tried to reset (help > Troubleshooting > click 'Reset Firefox'. It said it would try to hold onto bookmarks, passwords, etc). When it closes, we hit the Crash Report screen again. Launching Firefox reveals nothing has changed (Theme being the same is the give-away). I'd say that hasn't worked as of yet.
I typed about:crashes and copy/pasted everything in the "details" tab. If the "Raw Dump" tab would be more effective, just say so and I'll add that
Signature coffplgn.dll@0x3714
UUID 89ad14cd-e4c9-43d9-9ba0-fa8332130111
Date Processed 2013-01-11 08:26:27
Uptime 27
Last Crash more than 3 months before submission
Install Age 27 seconds since version was first installed.
Install Time 2013-01-11 08:25:31
Product Firefox
Version 18.0
Build ID 20130104151925
Release Channel release
OS Windows NT
OS Version 5.1.2600 Service Pack 3
Build Architecture x86
Build Architecture Info AuthenticAMD family 16 model 2 stepping 3
Crash Reason EXCEPTION_ACCESS_VIOLATION_EXEC
Crash Address 0x54d7048
User Comments
App Notes
AdapterVendorID: 0x1002, AdapterDeviceID: 0x9611, AdapterSubsysID: 00000000, AdapterDriverVersion: 8.531.0.0
D3D10 Layers? D3D10 Layers- D3D9 Layers? D3D9 Layers-
Processor Notes
EMCheckCompatibility True
Winsock LSP
MSAFD Tcpip [TCP/IP] : 2 : 1 :
MSAFD Tcpip [UDP/IP] : 2 : 2 : %SystemRoot%\system32\mswsock.dll
MSAFD Tcpip [RAW/IP] : 2 : 3 : %SystemRoot%\system32\mswsock.dll
RSVP UDP Service Provider : 6 : 2 : %SystemRoot%\system32\rsvpsp.dll
RSVP TCP Service Provider : 6 : 1 : %SystemRoot%\system32\rsvpsp.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{0BBE6F70-6FFF-4959-B762-459BA69AE89C}] SEQPACKET 4 : 2 : 5 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{0BBE6F70-6FFF-4959-B762-459BA69AE89C}] DATAGRAM 4 : 2 : 2 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{CA2BB869-E7F7-405E-9266-0E2BDF8F748D}] SEQPACKET 1 : 2 : 5 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{CA2BB869-E7F7-405E-9266-0E2BDF8F748D}] DATAGRAM 1 : 2 : 2 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{2FAAFBE0-C5F0-46B6-A02A-3B87402292F7}] SEQPACKET 2 : 2 : 5 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{2FAAFBE0-C5F0-46B6-A02A-3B87402292F7}] DATAGRAM 2 : 2 : 2 : %SystemRoot%\system32\mswsock.dll
Adapter Vendor ID 0x1002
Adapter Device ID 0x9611
Total Virtual Memory 2147352576
Available Virtual Memory 1770160128
System Memory Use Percentage 29
Available Page File 4371468288
Available Physical Memory 2476265472
Bugzilla - Report this bug in Firefox, Core, Plug-Ins, or Toolkit
Related Bugs
783369 NEW --- Norton Confidential 2012/2013 crashes (couictlr.dll, coffplgn.dll)
Crashing Thread
Frame Module Signature Source
0 @0x54d7048
1 coFFPlgn.dll coFFPlgn.dll@0x3714
2 couictlr.dll couictlr.dll@0x28355
3 couictlr.dll couictlr.dll@0x3dcec
4 couictlr.dll couictlr.dll@0x35609
5 couictlr.dll couictlr.dll@0xbe7f
6 oleaut32.dll APP_DATA::AllocCachedMem
7 couictlr.dll couictlr.dll@0x6106b
8 coFFPlgn.dll coFFPlgn.dll@0x590e7
9 coFFPlgn.dll coFFPlgn.dll@0xa812b
10 coFFPlgn.dll coFFPlgn.dll@0x51748
11 coFFPlgn.dll coFFPlgn.dll@0x2bec
12 coFFPlgn.dll coFFPlgn.dll@0x4ef66
13 coFFPlgn.dll coFFPlgn.dll@0xb335b
14 coFFPlgn.dll coFFPlgn.dll@0xc753f
15 coFFPlgn.dll coFFPlgn.dll@0x3c5a3
16 coFFPlgn.dll coFFPlgn.dll@0xa7b00
17 coFFPlgn.dll coFFPlgn.dll@0xa522
18 coFFPlgn.dll coFFPlgn.dll@0xc6fe
19 coFFPlgn.dll coFFPlgn.dll@0x2a908
20 coFFPlgn.dll coFFPlgn.dll@0xc8813
21 coFFPlgn.dll coFFPlgn.dll@0xa9e51
22 coFFPlgn.dll coFFPlgn.dll@0x2a346
23 coFFPlgn.dll coFFPlgn.dll@0xaa35b
24 xul.dll nsObserverService::NotifyObservers xpcom/ds/nsObserverService.cpp:149
25 xul.dll nsCOMPtr_base::assign_from_qi obj-firefox/xpcom/build/nsCOMPtr.cpp:56
26 xul.dll xul.dll@0xebfe67
27 @0x12c713
28 xul.dll nsWindowWatcher::RemoveWindow embedding/components/windowwatcher/src/nsWindowWatcher.cpp:1221
29 xul.dll nsAppShellService::UnregisterTopLevelWindow xpfe/appshell/src/nsAppShellService.cpp:525
30 xul.dll nsTimerImpl::Release xpcom/threads/nsTimerImpl.cpp:138
31 xul.dll nsWebShellWindow::Destroy xpfe/appshell/src/nsWebShellWindow.cpp:758
Show/hide other threads

Mail accessing the internet all the time and hangs when closing or deleting

Why is it every time I look at my DSL modem when Mail is open there is activity and when I close Mail it stops? It's only set to get the mail every 5 min but it's constantly accessing the internet. The other problem is that it seems to hang when closing and sometimes it takes several mins before it will delete an email that I wanted it to delete. Any ideas? I'm running 10.4.4 with a FRESH install, not an upgrade. I only have .Mac mail accounts so there is no other active accounts that Mail has to access to get mail.
This has only been going on since I upgraded to 10.4+ so I tried to reload the 10.4 several times without any change.
Thanks, Jason

Okay I used the Activity Monitor to check out mail while it was using the DSL connection. It was using 1.20% CPU and receiving 7 packets/sec. It's memory usage was slowly but steadily climbing until I shut it down. Then all the network activity stopped. As I said before this seems to start after mail has been open but not used for about 20-30 min and doesn't stop until I close mail.
Any ideas. Initially I was worried that there was an exploit in the new mail and someone was using it to access my mac. Is this something worth worrying about or is this a Mail quirk that will be patched later? Anyone else having this issue. I'm not even sure it's a problem but I don't see why Mail would be constantly downloading packets????
Jason

Slight gap at corners between LCD and base when closed

Similar Messages

Maybe you are looking for