Slight problem with DWM, terminator, and weechat

So obviously I use arch linux. My WM is dwm. I am using terminator for weechat so I can copy/paste. Only problem is I can't use ALT + left/right of the arrow key to navigate the channels on weechat. Anyone else have this problem or a solution?

Try This...
Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

Similar Messages

Problem with Nokia Camera and Smart Sequence

Hi,
I'm having a problem with Nokia Camera and the Smart Sequence mode.
Basically, if you take a picture using nokia camera, and view it in your camera roll, it usually says, underneath the pic "open in nokia camera".
Well, if I take a pic using the Smart Sequence mode, it just doesn't say "open in nokia camera" so, to use the functions of smart sequence (best shot, motion focus, etc), I have to open nokia camera, go to settings and tap the "Find photos and videos shot with nokia camera" option.
Does anyone has the same problem? Anybody solved it?
I already tried reinstalling nokia camera, but that didn't help.
I'm running Nokia Black on my 925.
Thanks everyone!

Hi,
I had the same problem with my 1020. It did get fixed with the last update to Nokia camera.
However, IIRC, it didn't just happen right away. When browsing the camera roll I'm pretty sure that the "open with Nokia camera" text wasn't there.
Slightly disappointed I opened the (Nokia) camera anyway and was going to test the smart sequence again. I noticed the only precious pic I'd taken using this actually appeared top left of the screen.
I opened it and I had all the smart sequence editing options again - that we're missing previous. Made a new picture and saved it.
Now when in camera roll the text shows below the image and all is good.
This probably doesn't help much except that it didn't seem to fix automatically.
I work @Nokia so I can ask around a bit to see if this is a known / common issue (not that I know any developers)

Error: There is a problem with the file and it cannot be copied

I've been trying to copy (and essentially move) the contents of an NTFS-formatted external HDD to my iMac's internal HDD so I can then format the external HDD to Mac OS Extended. However, when I simply try to drag and drop, I get an error during the transfer that states:
There is a problem with the file and it cannot be copied.
I tried a basic cp command in Terminal to copy all contents of the external HDD to a folder on my iMac's desktop, and found that while there were no errors, there were many individual files missing full chunks of data (ie. original file would be 4GB on my external HDD, but only 350MB on my desktop).
Any ideas on how I can successfully copy a large amount of data (approx. 170GB) from my external HDD to my internal HDD while avoiding this error, so I can ultimately format my external HDD to Mac OS Extended? ANY help is greatly appreciated.

That's not a good error to see. It indicates something is very wrong. Pulled out of an old programming header file:
ioErr = -36, /*I/O error (bummers)*/
If Apple labelled it "bummers," they had a good reason! Unfortunately, that doesn't bode well for you.
Try running Disk Utility again. Keep repairing over and over until one of two things happens: 1) Disk Utility says no repair was needed, or 2) Disk Utility reports the same error in two sequential repair sessions and is unable to repair it both times.
If you hit the second case, or if you hit the first but still can't copy files, then you've got two basic options:
= Buy a third-party disk utility or two and try them. Try TechTool as a first choice.
= Recover what files you can and write the rest off as gone.
= Send your drive to a data recovery service and hope they can extract more than you can.
Of course, none of this is necessary if you have a backup of the contents of that hard drive. (If you don't, this is your learning experience. Once bitten, twice shy, so they say.) Also, regardless of the outcome, once you've got your data or have decided it's gone, you're going to want to wipe that drive completely clean. Reformat the drive with Disk Utility, then when it's done, select the drive in Disk Utility and hit command-i. (Don't select the new volume you just created on that drive, select the drive itself. Mine looks like "232.9 GB Hitachi ..." with the volume name indented underneath.) Look for an item that says S.M.A.R.T. Status, and if it doesn't say Verified, you might as well throw out the drive. Don't trust any more data to it.
If all appears safe, you can start moving data back onto it. But, as always, make sure you have a backup of everything!

I am using iPhoto 11 and my library has 736.5mb on disk. I have problems with iPhoto stalling and needing to force quit. I have rebuilt my library. Can you suggest anything else?

I am using iPhoto 11 and my library has 736.5mb on disk. I have problems with iPhoto stalling and needing to force quit. I have rebuilt my library. Can you suggest anything else? Thanks, Rose

Make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iPhoto folder.
Click to view full size
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
NOTE 2: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
If that does'nt help log into another user account on your Mac and try iPhoto from there.

Audio latency problem with VST, SONAR and Audigy 4 PRO

Hello all,
I have a slight problem with audio performance on my computer and I can't isolate what is wrong. I am using Cakewalk SONAR 4 studio edition, and a recently purchased Audigy 4 Pro soundcard. ( I know it's not quite professional grade, but it works well for me) I recently bought some string instruments from the Vienna Symphonic Library. So far, I love the sound of these "virtual instruments" if you will. The problem comes when I try to record them. I get stuttering and dropouts when I try to record the track in Sonar. I've tried the WDM drivers in 16 and 24 bit modes and the ASIO drivers (which apparently only support 16 bit!?) I know Creative has mentioned that these cards can record easily at 24/96 which is what I'd like if possible. Vienna instruments come in a 24 bit format. Is there something I'm doing wrong or do I need to seriously consider a different soundcard? I use Sonar to bring in the Vienna instruments as a VST. I also apply a reverb on it. When I just play this stuff on my MIDI keyboard, it all sounds great and keeps up. The moment I go to record though, I get dropouts after about 15 seconds or so. Also, is there no way to get ASIO 24 bit support for creative's consumer level cards? I'd be happy with the WDM's personally if those would work. I've looked into the KX project as well but haven't had a chance to try their drivers yet. On a different note, what are the significant differences between ASIO and WDM if any at all? (aside from supported bit rates) My current computer setup is quite powerful and I don't use much CPU power at all so I don't think it's my setup. Intel E6700 (2.67Ghz) Core 2 Duo, 2GB DDR2-800, 320GB Seagate SATA in RAID 1, Nvidia 7600GT, and Creative Audigy 4 Pro. Any help, or insight would be greatly appreciated!
Matthew

Audigy 4 Pro should support 24-bit/96 kHz w/ ASIO --> have you selected those I/O drivers in Sonar audio settings (Options-Audio-Drivers -tab). ! You need to unselect all I/O drivers first to get those 24/96 drivers selectable)?
Dropouts comes from various sources. Have you checked if the read/write caching is set properly (Sonar, try different settings)?
Stuttering may come from shared IRQ/resources and PCI Latency settings.
If your graphics card is not PCIe then, make this registry tweak
Run regedit and search the key named as DisableProgPCILatency
- set all 'DisableProgPCILatency' key values to 1 (HEX or DEC) (1 = disabled, 0 = enabled)
- boot to BIOS settings and find the "PCI latency timer" option --> set its value to 32 or 64 (this is global PCI latency setting)
- reboot
and check the IRQ situation. If there are IRQ shares between Audigy and other devices/controllers, try to get those fixed by disabling unneeded controllers/devices or by moving the Audigy into another PCI slot (PCI slots #3 and #4 are normally not shared).
Couple meaninful differences between WDM/KS and ASIO are;
- you can't get latency lower than 10 ms w/ WDM/KS (well, you can in Sonar by manually editing those buffer values but, the result is not good when you go under 10 ms buffer values (buffersize / samplerate * 1000 = latency in ms --> 512/96000*1000=5.33ms)
and
- you can record from one stereo (you can split this to two mono) source at a time w/ WDM (recording source is set in CT Surround Mixer (or windows recording controls))
- ASIO supports (Audigy serie) locked 'resolutions' only - 16/48 or 24/96
Also, tweak your system for music - http://www.musicxp.net/
Some information on CT ASIO -
http://forums.creative.com/creativel...essage.id=1726
jutapa
Message Edited by jutapa on 12-17-200606:01 PM

Problems with ListViews Drag and Drop

I'm surprised that there isn't an Active X control that can do this more
easily? Would
be curious to find out if there is - although we aren't really embracing the
use of
them within Forte because it locks you into the Microsoft arena.
---------------------- Forwarded by Peggy Lynn Adrian/AM/LLY on 02/03/98 01:33
PM ---------------------------
"Stokesbary, Michael" <[email protected]> on 02/03/98 12:19:52 PM
Please respond to "Stokesbary, Michael" <[email protected]>
To: "'[email protected]'" <[email protected]>
cc:
Subject: Problems with ListViews Drag and Drop
I am just curious as to other people's experiences with the ListView
widget when elements in it are set to be draggable. In particular, I am
currently trying to design an interface that looks a lot like Windows
Explorer where a TreeView resides on the left side of the window and a
ListView resides on the right side. Upon double clicking on the
ListView, if the current node that was clicked on was a folder, then the
TreeView expands this folder and the contents are then displayed in the
ListView, otherwise, it was a file and it is brought up in Microsoft
Word. All this works great if I don't have the elements in the ListView
widget set to be draggable. If they are set to be draggable, then I am
finding that the DoubleClick event seems to get registered twice along
with the ObjectDrop event. This is not good because if I double click
and the current node is a folder, then it will expand this folder in the
TreeView, display the contents in the ListView, grab the node that is
now displayed where that node used to be displayed and run the events
for that as well. What this means, is that if this is a file, then Word
is just launched and no big deal. Unfortunately, if this happens to be
another directory, then the previous directory is dropped into this
current directory and a recursive copy gets performed, giving me one
heck of a deep directory tree for that folder.
Has anybody else seen this, or am I the only lucky one to experience.
If need be, I do have this exported in a .pex file if anybody needs to
look at it more closely.
Thanks in advance.
Michael Stokesbary
Software Engineer
GTE Government Systems Corporation
tel: (650) 966-2975
e-mail: [email protected]

here is the required code....
private static class TreeDragGestureListener implements DragGestureListener {
     public void dragGestureRecognized(DragGestureEvent dragGestureEvent) {
     // Can only drag leafs
     JTree tree = (JTree) dragGestureEvent.getComponent();
     TreePath path = tree.getSelectionPath();
     if (path == null) {
          // Nothing selected, nothing to drag
          System.out.println("Nothing selected - beep");
          tree.getToolkit().beep();
     } else {
          DefaultMutableTreeNode selection = (DefaultMutableTreeNode) path
               .getLastPathComponent();
          if (selection.isLeaf()) {
          TransferableTreeNode node = new TransferableTreeNode(
               selection);
          dragGestureEvent.startDrag(DragSource.DefaultCopyDrop,
               node, new MyDragSourceListener());
          } else {
          System.out.println("Not a leaf - beep");
          tree.getToolkit().beep();
}

Problems with Customer Service AND unexplained charges!

I've been with Verizon for I-don't-know-how-many years, and through the years you are bound to have a few problems here and there but some of the problems are just ridiculous! It's also the same reocurring problem!!!!!!!!!!!!!!!! I was with Alltel first, before it was bought out by Verizon. The years I was with Alltel, I didn't have near as many problems. It seems EVERY time I do the smallest change or something to my phone or bill, I get a ridiculous amount of charges that I was NOT aware of, nor told about... EVEN IF I ask "So this isn't going to change my bill, or there will not be any unexpected/unexplained charges that I don't know about?"... BUT not matter how many times I ask... and NO matter how many times I am told "no"... there always is. For example.... last year, I updated and signed a new 2 year contract and purchased the first Driod. Before, my 30 day warranty was up, I was having problems with my Driod, and decided to send it in and get a new one. Before I did this.. I called customer service to make sure there would be no interuption in my bill, and there wouldn't be any unexpect charges, and there would be no difference in anything. I was told there was not, and once I recieved my new phone, just send it in and nothing would be changed. Of course, when I get my bill.. I see I was charged $500 for the new phone. It was explained to me that my credit card was reimbursed (which I never check that card, because I never used it expect to purchase the phone) and that I was recharged for the new phone, since it was a new phone. So I had to fork out the $500 (on top of my bill) and then wait months to get the $100 rebate card. Months after that, I "assumed liablity of my line" because I was on a plan with my family. I decided to have my own line, so I "assumed liability." I was not told that when I did that, I "renewed" my contract date. So I just added 6 more months to my 2 year contract. Was NOT told about that! Then again...... I was recently having problems with my Driod (the screen went black and would not come back on.) I had to turn on an OLD motorola razor, so I would not be without a phone for two days while I was waiting on my phone to come in. As soon as my phone came in, I had my Droid turned back on. I recieved my bill recently, and my bill was $200 over what it normally should be.... so I called in... apparently, when I had my phone replaced, they dropped off my data package and when I recieved my replacement driod, they never put it back on. So I was being charged for alllll my data usage... again I was NOT told about this. I wasn't even aware that they had dropped off my data package, and when/where did they get the authority to do that??? These are just a FEW of the problems that I have had.................................
Does anyone have these reoccuring problems!?

I understand that my bill can be viewed online, and I do view it fairly regularly, so if there are any unexplained charges, I can call Verizon asap. The problem does not come from me not understanding my bill, but from customer service. I have been with Verizon for a very long time, and it is a continuing problem. Where did Verizon get the 'OK' to drop my data package off my plan? Who authorized that?
After calling Verizon and trying to find out the problem, the gentleman told me that when I activated on old phone while I was waiting on my new Droid to arrive, my data package was dropped off and I "should" have been told about that. When I reactiviated my new Droid, I "should" have called and had them restart my data package. I was not aware that when you activate an old phone that data plan is taken off your plan. In all my years of having cell phones, I never make two years with one phone. I have always, at one point, had to turn on an old phone, and my data package has NEVER changed. Why would I have my data package dropped and why would I have to call Verizon to have it restarted. I would never know to do that unless I was TOLD that my data packaged HAD to be re-added when I recieved my new phone, but I was never told of that.
All of that is beside the point, the point is, Verizon was never given the authorization to change my plan. Never. My bill was taken care of and readjusted, and I am thankful for that. It does not change the fact it is always a hassle with Verizon Customer Service and I am always the one having to PROVE that I am not at fault, or that I was NEVER told of certian things. EVERY TIME I HAVE CALLED CUSTOMER SERVICE, I AM TOLD "I'M SORRY, THEY SHOULD HAVE TOLD YOU THAT."
"they should" does not help my bill with the extra armount of charges.

Problems with dropped calls and no reception on Samsung Continuum

My mother and I both purchased a Samsung Continuum in late March 2011, and have experienced the same problems with the phone. The device drops at least 2-3 calls per day, often on the same conversation; we have not found that location or time of day makes a difference. The phone freezes up frequently, even if no apps are running in the background. We lose our 3G network reception frequently, and cannot access our texts, emails, or the internet. The screen saver kicks in even when we are actively dialing a number, or typing in a text message. The overall performance of the phone is also poor, and it is quite slow much of the time.
We have raised this issue several times with a representative at one of the Verizon stores, but he states that he can find no problem with the phone, and that these issues may not be covered under our insurance plan. None of my friends with non-Samsung phones are having the same problems with phone reception and performance. I am aggravated enough with these issues that I am considering reactivating my old Blackberry, which worked like a charm.
I am not upset that my phone has not been updated to Android 2.2. I just want the phone to perform as stated, and not fail at its primary function: making and receiving phone calls. I am not certain if these problems originate with the phone, Verizon, or Samsung, nor do I care. I just want to resolve these issues as soon as possible, or I will have to look at other alternatives.
Thank you.

If this doesn't work...now what??? I have a useless $400 plus piece of unreliable junk. My Motorola Razor was ions more reliable than this phone...very, very sad but true.
What carrier were you using with the Razor? AT&T? Same area?
Dave M.
MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
Creator of 'Mac611 - Mobile Mac Support' (designed exclusively for an iPhone/iPod touch)

Problems with Mail, Safari and iTunes after updating to 10.5.6

Hi all,
after installing 10.5.6 I have problems with Mail, Safari and iTunes.
The time to open mails, websides and iTunes store is increasing dramatically since the update. If I open a webside parallel with Safari and Firefox, Safari needs minimum 15 times longer to open the complete side. Mails containing HTML-code also needs a long time to be opened. Tha same Problem with iTunes store. Connecting to the Store costs at least 30 - 40 seconds. And unfortunately for every iTunes store side I open. Its terrible
Any idea or workaroung to solve that problem?
Regards
Michael

First, run Disk Utility and repair permissions and then restart.
I installed the 10.5.6 Combo update. Sometimes things get "lost in the translation" when you use Software Update depending on your installation. Perhaps you can download 10.5.6 Combo from the website and install it from your desktop.

Problems with the richTextEditor and quotes

Hello
I'm having problems with quote chars and the richText
control's htmlText. When users enter quotes into the richTextEditor
control. The quotes breaks the HTML text, meaning it's no longer
well formatted. Is there an escape char that I need to use. Or do I
need to force some kind of refresh on the control prior to using
the htmlText string?

I have been using RTE in a content management system and
found a need to replace non-standard quote characters with proper
UTF-8 character counterparts. Curly quotes in particular are
problematic. Use a replace function to substitute non-standard for
standard characters.

Problems with .ARW files and auto toning

problems with .ARW files and auto toning
let me try to explain this because this has happened in past and never found a way to resolve but i lived with it
now that I have a Sony A7R the problem is more serious
Firstly i take pride it making the picture happen all in camera, i use DRO lvl 5 to get enough light, like when i'm shooting at dusk. DRO its like doing HDR but in a single file, it lightens the darks. in my camera i'm happy with results
but when I upload them to lightroom, they come out near black.
allow me to explain
lets say I import 100 images
i double check my preferences and everything is UNCHECKED when it comes to importing options, there is no auto toning, nothing.
as the images import i see a preview in the thumbnail which looks fine.
i double click on one to enlarge it, hence leave grid view.
for a brief 1 or 2 seconds, i see the full image in all its glory but than lightroom does something funny, it darkens the image
one by one as it inspects each image, if it was a DRO image it makes it too dark.
to make this clear, the image is perfect as it was in the beginning but after a few seconds lightroom for some reason thinks it needs to correct it.
how to prevent lightroom from doing this, i want the image exactly as it is, why must lightroom apply a correction>?
i think it has to do something with interpreting the raw file and lightroom applies its own algorithm.
but here is what i dont get.....before lightroom makes the change i'm able to witness the picture exactly as it was taken and want it unchanged..
now i have to tweak each file or find a profile for it which is added work.
any ideas how to prevent lightroom from ruining my images and just leave them as they were when first detected...
there are 2 phases...one is when it originally imports and they look fine
second is scanning each image and applying some kind of toning which darkens it too much.
thanks for the help

sorry thats the auto reply message from yahoo email.
i've disabled it now
thing is, there is no DRO jpg to download from the camera
its only ARW. so my understanding is when i use DRO setting, the camera makes changes to the ARW than lightroom somehow reads this from the ARW.
but then sadly reverts it to no DRO settings.
because i notice if i take normal picture in raw mode its dark but if i apply dro to it, it comes out brighter, yet when i d/l the image from camera to lightroom, which is an ARW - there are no jpgs. lightroom decides to mess it up
so in reality there is no point in using DRO because when i upload it lightroom removes it.
is there a way to tell lightroom to preserve the jpg preview as it first sees it.
its just lame, picture appears perfect...than lightroom does something, than bam, its ruined,.
what do i need to do to prevent lightroom from ruining the image? if it was good in the first place.

Problems with itunes 8 and ipod shuffle gen 2.

Problems with itunes 8 and ipod shuffle gen 2.
I recently upgraded from itunes 7 to itunes 8 on my windows XP PC. That's when i had issues syncing my 2nd gen shuffle.
When i try to drag songs directly on it, itunes says i can't
I made a playlist and use auto fill. But when I remove it from the dock, it's either not updated, or the new songs are at the bottom of the playlist when they are supposed to be up higher. I end up having to hit auto fill twice to make it sync correctly.
Computer Specs
Windows XP SP3
384MB of Ram (works really good)
USB 1.1 connection
Pentium 4 clocked at 1.285 GHZ
IPOD Shuffle Specs
2nd Generation
1GB (964MB)
Version 1.0.4
unchecked options: open itunes when ipod is attached, Sync only checked songs, convert higher bit rate songs to 128kbps AAC, Enable sound check, Limit MAX volume, enable disk use
All those are NOT checked. Sometimes i enable disk use for seeing the IPOD_Control folder, but either way it still messes up.
Itunes Specs:
Version 8.1.1.10

This is a well-known issue. Apple changed the internal file names used with iTunes 8, which makes the ordering on 2nd generation Shuffles behave differently. There is no good workaround, apart from moving the files with a hand-crafted AppleScript program.
Apple has been silent on the issue, so nobody knows if we'll ever have a fix for it or not.

I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid co

I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid contrast, colour, radius, high tonal width and low tonal width.
If anyone has any suggestions as to how to access this advanced section, I'd be most grateful.

Hi David-
The advanced adjustments in the Highlights & Shadows tool were combined into the "Mid Contrast" slider in Aperture 3.3 and later. If you have any images in your library that were processed in a version of Aperture before 3.3, there will be an Upgrade button in the Highlights & Shadows tool in the upper right, and the controls you asked about under the Advanced section. Clicking the Upgrade button will re-render the photo using the new version of Highlights & Shadows, and the Advanced section will be replaced with the new Mid Contrast slider. With the new version from 3.3 you probably don't need the Advanced slider, but if you want to use the older version you can download it from this page:
http://www.apertureexpert.com/tips/2012/6/12/reclaim-the-legacy-highlights-shado ws-adjustment-in-aperture.html

My iTunes says that there is a problem with my ipod and i have to restore it, but i bought songs on my itunes on my ipod not on the itunes on the computer so i have not transfered purchases and now it wont let me how doi restore without losingmy newsongs

So my itunes says that there is a problem with my itunes and i have to restore it but i have purchased ne songs through itunes on my ipod not through the computer so of course i would have to transfer purchases on my ipod to the computer before i restore it so it does not delete everyting and then i cant back them up. So i went to transfer purchases and It wouldent let me. So how do i transfer my purchases before i restore my ipod so i can back it uup so i dont lose everything. Thanks

There is a backup plan after doing the Restore. Read this.

Anyone NOT having problems with ITunes 8 and latest firmware update???

I have really been put off updating to ITunes 8. The firmware update appears to be doing well. Is there anyone that uses a MacBook like myself who have had absolutely NO problems with new Itunes and firmware update? Answers on the back of a £50 note....

Not having issues now that I have updated all i(hardware) firmware to version 2.1, two phones and an iPod Touch, all work fine (So Far) (knocking on wood). As far as iTunes goes I have mixed feelings. It's a bit faster and more stable, however they removed the "Burn CD" ability from the software. That blows a bit as I would make CD's from some of my play lists to play in the car. Yes I can dock my devices in the car, but as a matter of convenience it's easier to fire up the CD when your in a rush.

Slight problem with DWM, terminator, and weechat

Similar Messages

Maybe you are looking for