Slightly jittery video export from FCPX

I'm placing a supplied 3D rendering video file in FCPX and when I export the footage it doesn't move as smoothly as the original footage. It seems a bit more jittery. I was supplied with both Apple ProRes 422 HQ and a full Animation format and they both export the same. Any idea why this is happening?

The footage was supplied by a 3D animation studio we use. They can provide me with whatever format I require. In the future what should I ask for exactly to make it easier to edit in FCPX?
Here is a screen grab of the "hi-res" render file they also supplied me with.

Similar Messages

Problems exporting from FCPX

I can not export from FCPX. Get stuck on 95% and I give up after 45 min. It´s about 15 min fotage that I tried to export in Apple TV3 format.

I've had this issue weekly with a show I produce. It bugs me for hours. In my case, I have to wait until the entire timeline is rendered, and then I have to export it to ProRes 422. Any other codec requires a re-render, which provokes the problem again. The problem starts when I take a few clips from my P2 and use the stability function along with any color correction topping them off with titles. It seems as though part of the rendering process involves re-analyzing the entire clip during rendering, and if I don't allow it to completely render the clips, I get missing video with graphics on top. I have a 12-core machine with 16GB RAM, and yet it still takes about two hours to render my 30 minute show after I'm done. This doesn't include the hours it takes to analyze the P2 clips as I import them, which also hinders me during editing and causes continual crashes. I'm hoping this new update I'm about to run addresses some of those issues.

Movies have stopped exporting from FCPX?? Urgent

I have recently done the update to Mavericks and since then my movies wont export from FCPX?
When I click export nothing happens and when try uploading striaght to youtube it come up with this.
The operation couldn’t be completed. (com.apple.Compressor.CompressorKit.ErrorDomain error -1.)
Anyone have any solutions got some deadlines to meet need help asap!!!
Cheers

http://www.apple.com/finalcutpro/specs/
This is the page that's probably relevant to you.
http://support.apple.com/kb/HT4664?viewlocale=en_US&locale=en_US
The requirements have changed a bit since the first version two and half years ago. It's also possible the software was simply copied onto the machine without being downloaded from the App Store.

Export from FCPX to Compressor 4 Failed - Quick time Error:-50

Hi all,
Having some trouble exporting a large video (1080p, about 5 gb) after using the Share>send to compressor option. Footage was shot with a Canon Ti3, and exported fine by itself to an .mov, but when sent to compressor I get the above error.
I have so far done the following:
trashed FCPX and Compressor 4 prefs
checked for updates
deleted the projects render files and rerendered
Any ideas? Screen shot below.
Jimmy

There have been many reports of QT- 50 errors on export at FCPX forum.
This may sound as though I'm changing the subject, but why not bring your exported movie into Compressor? It's always been a more reliable workflow than Send-to Compressor going back to the FCS days.
If you are committed to the Send workflow, try creating a new project and copy and paste from the old project to the new.
Russ

MPEG IMX 625/50 export from FCPX

Hi,
is there a way to export to IMX 50 (MPEG IMX 625/50) from FCPX directly or by sending it to Compressor 4 ?
FCPX manual says that it can work with IMX files but I cannot find a way to export to it. I have also looked through Compressor 4 manual and can't see this export option either. Please help.

Hi Tom,
maybe I am missing something here but I cannot see an 'export' menu in FCPX.
I've looked through the entire interface with no luck. I only see that share timeline range button:
which has really limited options to choose from.
In the File menu I only have the Export XML... Please don't mind if this is something obvious but I am still learning the whole new interface, which by the way is simply awesome!

Strange glitch in my audio when exporting from FCPX.

I just finished my short film in FCPX today, and exported it. I used Apple's ProRes 422(HQ) format to export it using the "Export Using Compressor Settings" options. I was content with the video quality, however the audio was I believe to have been corrupted. I played my video in QuickTime X and on both my iMac and my MacBook Pro I can hear really annoying and distracting glitches that keep cutting up my audio and making the bass sound extremely weird. In the end, I put my video in iMovie, silenced out the audio and put on a track of the same song I was using in the original video. And just like I expected, the audio of the file that came out of iMovie did not have any of these weird glitches. Does anyone know what I might be doing wrong in FCPX that is casuing this problem or it might be something to do with the software itself? Perhaps bugs?

No, they are AAC audio files, 256kbps that I got from my iTuens library. So they need to be AIFF at 48k? Does the convert option to AIFF in iTunes satisfy this criteria? I am relatively new to audio formatting and related issues.

Only one CPU core is working during video export from Premiere Media Encoder

Windows Resource Monitor showed cores 'parked' at first. I was able to turn that feature off using regedit. They no longer say they are parked'. but still only one core is at 100% while the other seven cores are at close to zero %. Windows 7 Ultimate SP1 64-bit. i7-2600k processor 3.4 GHz running at 3.8 GHz XMP setting. ASUS P8Z77-V motherboard 32 GB RAM.
I had this problem in the past and fixed when I turned off core parking. But, I recently clean installed Windows and problem has returned. I contacted Microsoft and they assured me that the problems lies with Premiere or AME.
it just took over an hour to export a video that should have taken 10 minutes

This has been driving me CRAZY... so going over the message boards from 2 to 5 am this morning I found the best explanation I have seen. The problem is that Adobe Creative Cloud is NOT "Processor Group Aware". Windows parses any more than 36 cores into "Processor Groups" and while the Pro version of Windows 7 & 8 can handle 256 threads they have to spread them across multiple processor groups.
Simple Version: AREA | How many cores does 3ds Max support?
Microsoft's Explanation: Processor Groups (Windows)
Clearly, this is an Adobe Problem... If any engineers are reading this PLEASE review the below and incorporate it into your next build of Creative Cloud!!!
https://msdn.microsoft.com/en-us/library/windows/hardware/dn653313%28v=vs.85%29.aspx
Again, I bought a VERY expensive machine based on your white paper that recommended Dual Xeon Workstations. Please, Please Give us the product you PROMISED!!!
Michael

Why is QT not playing my movies which have been exported from FCPX?

Nov 11, 2012 1:07 AM Hello there. I have posted this post in Mac intel forums but have been redirected to post this post in FCPX forums and hence I am posting this thread here. Hope I will be given the proper answer to my problem/s which seem to be growing day after day.
I hope this is the right forum to place this post.
I have been facing this problem for the past 2 days only and I remember it all started after I had exported my latest project in FCPX. The exported file would not open up in quicktime player, and I started getting this notice even with other movies which were exported earlier and were being played by QT with no problem.
The screenshot given above came with with a movie I had exported about 2 months ago. At that time QT had no problem in playing it. But now, Why is it not able to play the same?
FYI, the latest project I had exported was started in fcpx 10-0-5 version and I had upgraded to the latest 10-0-6 version while the project was yet unfinished.
Apart from this problem, a number of other problems also have simulataneously raised their heads: FCPX is not opening up: stating that there is a corrupt data base which has to either restored or moved. And, when I try to move or delete the corrupt files via finder, I am not being allowed to delete them...error code -50 being the 'culprit'.
I am growing faint with all these malfunctioning and am in a perplexity of what to do next!
Any helps or guidance will be deeply appreciated.
Thanks. Take care.
iMac, Mac OS X (10.7.5), garage band, FCPX:10.0.6 version

Hello, hello, hello to one and all! Both the goose and Karsten's horse have been resurrected. HO HO HO am I on the top of the world. I feel that in asingle moment I have been transferred from the depths of the Dead sea to the top of Mount Everest!
What seemed to have worked is this:
I selected one QT movie which was not being opened and subjected it to PMan which did a rebuild and created an new repaired movie. I played it on QT and to my pleasant surprise it opened and I could watch the movie. There was one movie which was not being played in QT. I attempted to repair the same with Pman, but received a notice that it could'nt. It was not an important one and so I deleted the same. I tried playing other movies and found out that QT was playing the other exported movies which it was not opening earlier. Next, before opening FCPX I first opened the final cut events and deleted, or rather, was able to delete one particular event which I had been suspecting to be the cause of all these malfunctions: it was a still image captured on my daughter's Galaxy and she had sent the same to me via email a few days ago. I had imported the pic. into an event. When FCPX began its refusal to start misbehavior, it blamed this pic as one of the corrupt files which had to be restored or moved. Deleting this pic resulted in the resurrection of my works and I am taking no more chances in this matter. Right now I am in the process of duplicating completed projects on my scratch drive and archiving them in a different drive. I am duplicating them only with the used clips. Guess if any further clips are needed while rediting the work later, I could always import fresh clips into the event.
Thanks to all of you who have been helping me out in this thread. Any guidance as to how to avoit getting into this unpleasant situation will be received with attentive ears.

Can't export from FCPX!! (error -1)

Hi, I'm running FCPX 10.0.8 on a late 2012 iMac and I've got to get an edit out urgently for the client but I keep getting an error every time I try to export. I can't do anything with this video if I can't export it!!! I need help urgently.
I get the following message as attached:
The share operation Master File has failed.
The operation could not be completed because an error occurred when creating frame 1328 (error -1).
It's 1440X1080 ProRes 422 original footage AVCHD.
Any help on this?! It's urgent!
Btw I've already located frame 1328 and removed the clip that starts there. Still fails. Also tried copy/pasting it into new project and rendering it all again. Still fails.
Many thaks

Hi saddact,
I, along with many others are having the same problem. I am days behind on delivery of of a master disk for a client and thanks to FCPX 10.0.8, I have not been able to. I am currently "sharing" a masterfile and as of now it is working, I am at 73% . . .
First duplicated file, then the below . . .
Here is what seems to be working for me (fingers crossed):
Settings in Preferences set to under Playback / background render unchecked, under Destinations / Masterfile codec ProRes 422, . . .
Well forget that, just failed!!! "encoding frame error" one of many I have seen over the last few days!!!
I was able to export a codec set to H.264 last night, maybe I try that again.
Well I did not try deleting preferences this last time . . . try that along with the above.
Come on, lets get the updates right BEFORE releasing them.

Having Audio Glitching Issues in Video Export from Premier Pro CS6

I have been exporting video for the first time from Pro CS 6. The audio I am using plays perfectly in the timeline, but after exporting, when I play it back, it sounds very glitchy and it stutters quite a bit. I really hear a "digital fluttering".
I am using fairly common H264 settings for YouTube, and have tried different formats with the same effect. The audio is 48khz at 24bit, and shouldn't be having any problems. Its actually one song, and I am not using any of the audio from the camera footage. I haven't changed the audio at all, so it's not a conversion problem.
I have even tried to re-marry the song in pro tools, but it just seems to have the same effect. I can't seem to find any threads that address this, except for one, and the solution was not applicable.
Has anyone encountered this issue and figured out the solution?
I am not asking the box to do anything less than totally ordinary, so am a bit confused on this one.

yes.
here is a sample of the video and audio
https://vimeo.com/87367096

Video Export From Mac

When exporting my video on my Mac from Premiere Pro the video will play but there is just an awful static sound for all my audio. I have used the H.264 format with Match Source from my dell and it has worked fine. I don't know why it exports this way from my Mac and it is the computer I would like to use. Haven't been able to share anything from this computer yet. Any suggestions?

The Adobe Media Encoder CC menu:

Why grainy home video exported from itunes

All my pictures and movies that have been purchased and downloaded from itunes have looked great!!!
But today, I made some home videos on my Canon Zr800 video camera, and exported the video to Apple TV via IMovie/Itunes.
The result was a very grainy video. It was very poor quality. However, when we watch the same home video via IMovie on our imac computer, the video looks great. It only looks poor when viewing it on our tv via Apple TV. Any thoughts???

when i tried to create a new project just now...it came up as dv widescreen...that is probably the one i used
You are likely correct, I also assume you have used DV widescreen and I assume your source is WS as well, or you would have ended up with your movie stretched or pillarboxed. I would say you are using the best project settings, if you'd chosen another project type, there would have been a lot of unnecessary conversions happening, which would lead to lower quality.
I use the DV settings for my imovie projects, however when I export to tv I get interlacing problems (alternate lines across the picture are out of sync on high motion video), my solution is to use export to full quality and then send the result through streamclip. Maybe you might need to do something similar to solve your issue.
Just a couple of things to check first. Make sure your imovie prefs match your location, if your source is NTSC then ensure your project frame rate is 30 (25 for PAL), could you also open the finished movie in Quicktime (just drag and drop onto the QT app) open the movie info window and tell us what it says.

Slide Show video exports from Macs to Windows

I work on a Mac. When I export a Slide Show as Video anyone with a mac has no problem viewing it. my windows friends however can't open it. any suggestions?

Slideshows exported as video will play in the Adobe Media Player, Quicktime player and Windows Media player 12 (as well as quite a few other players, the best being VLC). The first two work on widows XP, Vista and 7 and OSX, the windows media player 12 on Windows Vista and 7. They must have a video player installed on their system to play the slideshows. All these are free for them to download. If they haven't got one of these players installed, other than suggesting that they do so, there is not a lot you can do...

Setting Poster Frame for H.264 Youtube HD video exported from Pr CC

Hey All,
I've searched many of the forums for an answer to this, but most of them refer to setting poster frames in encore/media encoder.
I'm wanting to select a specific frame from the video i've created to be used as the poster frame (i.e. the frame that is displayed as the preview of the video before it is played to show the viewer the content of the video) on the video when it's uploaded, either to Youtube or Facebook etc. As i'm not using En or the Media Encoder, I'm wanting to do this directly from Premiere Pro CC.
I'm sure I've seen/used a feature to select a poster frame within Pr before, but can't for the life of me remember or find where it is (if it is actually there at all).
Can anyone provide any suggestions?

Unfortunately Compressor, Quicktime X and Quicktime 7 can't play a Blu-ray .264 video files. This makes it hard to test your raw Blu-ray videos.
I found an app that will plaback the Blu-ray .264 video file on a Mac, VideoSpec. It's a free app!
http://videospec.free.fr/index.html
Drop your Blu-ray .264 video onto the open window and hit the play button in the upper left. VideoSpec has the Mplayer incorporated into the app. I guess you could download the stand-alone Mplayer app. But, Videospec gives you more options, video info for example.
What you could do to save on Blu-ray discs is to burn the Video onto a DVD for a test. You can only burn about 35 minute onto a DVD disc.
http://forums.creativecow.net/thread/8/1107035

Multi channel audio not exporting from fcpx xml as mono to logic always comes in a mixed surround

I have a long edit cut with 24 bit multi channel wav files (i.e 6 microphones on separate tracks but in a single wav file.)
This is very a very common production practice.
when i import into fcpx it defaults to seeing the files as surround. I change this to mono so i can mix and spit the audio between each mic.
The last step in the edit is to hand the mix off to the sound designer in logic.
however no matter how i export the xml file for logic. it always comes in as a surround file again instead of mixed mono files.
it shows up in logic as 6 tracks but all but generally only the top track has a mono mix of all 6 and the rest are blank.
it shows that all 6 are seen as 5.1 surround indicated by the icon.
interestingly if i just import the file directly into logic it comes in as 6 mono files. (the icon for mono showing and all are separate microphones)
Any ideas on how to get fcpx not to export the audio xml as surround? (it seems that it is locked to that on import no matter how i modify after)

Ok so i order to help anyone who is interested.
The only ironic solution to this problem i found was to use a plugin called xto7 to convert the xml to the old fcp7 format.
i then imported this into premiere pro.
this was then able to export an OMF that when imported into logic 10 that was using the correct 6ch mono setting as separate tracks.
Insane but it works until Apple fixes the incorrect meta data import in FCPX that sets the xml export to the default import that is always surround.
this is the only way i was able to send stems with all the edit points and fades for the sound editor.
If you don't have premiere lying around you maybe able to do it with fcp7 too we just didn't have it in this studio.
Fingers crossed Apple fixes the fcpx xml export.

Slightly jittery video export from FCPX

Similar Messages

Maybe you are looking for