Sliotin invail server name

hello evryone..i wont tel you about siliotn to tise problem
WIFI form smart phone nokia with speedtouch routrt
1- go to commend line
2- type < telnet 192.168.1.254 >
3- enter your password and username in mamgment your router
4- type < wireless qos config mode=disabled|>
5- saveall
enjoy naw

Why did you started this topic?
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Similar Messages

  • WebtopNaming - can not find server name for server ID

    We have a LB, and web servers in front of OpenSSO app servers in our environment.
    OpenSSO debug log CoreSystem fills up with lot of errors like these:
    ERROR: WebtopNaming.getServerFromID() can not find server name for server ID : 07
    com.iplanet.services.naming.ServerEntryNotFoundException: Cannot find server.
    Sometimes, it even complains about a server id (07 in the following trace) which doesn't even exist in the Site Id Table.
    There are no changes in the configuration. DNS is properly configured and all the servers and their connectivity are available. CoreSystem throws these errors even after a restart of opensso app servers.
    Any ideas about the root cause?
    amNaming:05/13/2011 10:22:37:009 AM PST: Thread[WebContainer : 0,5,main]
    Server Id Table -> {%protocol://%host:%port%uri/AssertionManagerServlet/AssertionManagerIF=iplanet-am-naming-samlassertionmanager-url, http://host4.company.com:8080/openSSO=04, com.iplanet.dpro.profile.agent.ProfileService=iplanet-am-naming-profile-class, %protocol://%host:%port%uri/SecurityTokenManagerServlet/SecurityTokenManagerIF=iplanet-am-naming-securitytokenmanager-url, %protocol://%host:%port%uri/authservice=iplanet-am-naming-auth-url, %protocol://%host:%port%uri/sts=sun-naming-sts-url, %protocol://%host:%port%uri/SAMLAwareServlet=iplanet-am-naming-samlawareservlet-url, http://host5.company.com:8080/openSSO=05, com.sun.identity.authentication.server.AuthXMLHandler=iplanet-am-naming-auth-class, com.sun.identity.policy.remote.PolicyRequestHandler=iplanet-am-naming-policy-class, %protocol://%host:%port%uri/loggingservice=iplanet-am-naming-logging-url, %protocol://%host:%port%uri/jaxrpc/=iplanet-am-naming-jaxrpc-url, %protocol://%host:%port%uri/FSAssertionManagerServlet/FSAssertionManagerIF=iplanet-am-naming-fsassertionmanager-url, %protocol://%host:%port%uri/identity/=sun-naming-idsvcs-rest-url, 03,05,04,02|03,01|03=iplanet-am-platform-site-id-list, %protocol://%host:%port%uri/identityservices/=sun-naming-idsvcs-jaxws-url, %protocol://%host:%port%uri/sts/mex=sun-naming-sts-mex-url, %protocol://%host:%port%uri/profileservice=iplanet-am-naming-profile-url, %protocol://%host:%port%uri/SAMLPOSTProfileServlet=iplanet-am-naming-samlpostservlet-url, 02|02,01|01,05|05,04|04=iplanet-am-platform-lb-cookie-value-list, %protocol://%host:%port%uri/SAMLSOAPReceiver=iplanet-am-naming-samlsoapreceiver-url, https://host4.company.com:8443/openSSO=01, com.sun.identity.log.service.LogService=iplanet-am-naming-logging-class, %protocol://%host:%port%uri/sessionservice=iplanet-am-naming-session-url, https://host5.company.com:8443/openSSO=02, %protocol://%host:%port%uri/policyservice=iplanet-am-naming-policy-url, iplanet-am-naming-service=serviceObjectClasses, com.iplanet.dpro.session.service.SessionRequestHandler=iplanet-am-naming-session-class, https://opensso-qa.company.com:443/openSSO=03}
    amNaming:05/13/2011 10:22:37:009 AM PST: Thread[WebContainer : 0,5,main]
    Site Id Table -> {03=03, 02=03, 01=03, 05=05, 04=04}
    amNaming:05/13/2011 10:22:37:009 AM PST: Thread[WebContainer : 0,5,main]
    Platform Servers -> [https://opensso-qa.company.com:443/openSSO, https://host5.company.com:8443/openSSO, https://host4.company.com:8443/openSSO, http://host4.company.com:8080/openSSO, http://host5.company.com:8080/openSSO]
    amNaming:05/13/2011 10:22:37:009 AM PST: Thread[WebContainer : 0,5,main]
    Platform Server IDs -> [03, 02, 01, 04, 05]
    amNaming:05/13/2011 10:22:37:010 AM PST: Thread[WebContainer : 0,5,main]
    ERROR: WebtopNaming.getServerFromID() can not find server name for server ID : 07
    com.iplanet.services.naming.ServerEntryNotFoundException: Cannot find server.
    at com.iplanet.services.naming.ServerEntryNotFoundException.<init>(ServerEntryNotFoundException.java:52)
    at com.iplanet.services.naming.WebtopNaming.getServerFromID(WebtopNaming.java:709)
    at com.iplanet.dpro.session.SessionID.setServerID(SessionID.java:380)
    at com.iplanet.dpro.session.SessionID.parseSessionString(SessionID.java:363)
    at com.iplanet.dpro.session.SessionID.getSessionServerID(SessionID.java:261)
    at com.iplanet.dpro.session.service.SessionService.isLocalSite(SessionService.java:881)
    at com.iplanet.dpro.session.Session.getSessionServiceURL(Session.java:1197)
    at com.sun.identity.authentication.UI.LoginServlet.initializeRequestContext(LoginServlet.java:153)
    at com.iplanet.jato.ApplicationServletBase.processRequest(ApplicationServletBase.java:578)
    at com.iplanet.jato.ApplicationServletBase.doGet(ApplicationServletBase.java:459)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)

    Thank You for the response.
    Here is my site configuration in OpenSSO:
    There are 4 servers in the two opensso hosts (2 secure, 2 non secure)
    Servers:
    http://host4.company.com:8080/openSSO
    http://host5.company.com:8080/openSSO
    https://host4.company.com:8443/openSSO
    https://host5.company.com:8443/openSSO
    Only one site with secure URLs is configured
    Sites:
    site1
    Primary URL: https://opensso-qa.company.com:443/openSSO
    Assigned Servers:
    https://host4.company.com:8443/openSSO
    https://host5.company.com:8443/openSSO
    From the CoreSystem log, Server ID definitions are:
    https://host4.company.com:8443/openSSO=01
    https://host5.company.com:8443/openSSO=02
    https://opensso-qa.company.com:443/openSSO=03
    http://host4.company.com:8080/openSSO=04
    http://host5.company.com:8080/openSSO=05
    Sometimes it throws an exception with existing server IDs. But sometimes it also complains about non existing server IDs.

  • List of server names

    Is it possible to get a list of server names that Adobe uses for hosting Creative Cloud apps and services?
    I am stuck behind a whitelisting firewall and any domains I need to access have to be listed specifically.
    Thanks

    Well... this morning I tried it again and it worked, without my having to change anything!
    I then managed to get Edge Animate to install after simply retrying 20 times.
    It seems there was some problem with Adobe's servers but what else is new?

  • Reference to database and/or server name in '' is not supported in this version of SQL Server

    Hello all
    I am using C# and ADO.NET (native) - Visual Studio 2013.
    I am always using full qualified queries like "SELECT * FROM [database].[schema].[table]"
    Obviously there is a problem when doing this against SQL Azure,
    I get the following error: "Reference to database and/or server name in '' is not supported in this version of SQL Server"
    Interesting fact: With SQL Management Studio, the same query works.
    I need to know if this error is really a true one or not.
    If yes, I can quit using SQL Azure. I would need a SQL Server and not a partial SQL Server :-)
    Thanks and best regards
    Frank

    Hi,
    Here are my suggestions:
    1. Use partially qualified queries, because:
    a. from a security standpoint, you'd want to limit your login's access across the server instance
    b. in order to achieve a even better, you should specify your database as the Initial Catalog directly in the SQL Connection.
    If you take into account these practices, SQL Database doesn't come with any limitation from that point of view.
    However, in regard to 'With SQL Management Studio, the same query works', this is actually only partially true because if you run that query agains ADO.NET, you'll actually end up in switching databases along the query which is obviously not permitted in
    SQL Database since you're running in a hosted black-box version of SQL you're not managing. It's just like running the USE <dbname> command which obviously doesn't work.
    Alex

  • WRT610N - Unable to change "Server Name" - No Text box.

    I have my WRT610N running V2 firmware.  In all of the documentation I see, on the Admin area within the Storage Tab, there is a text box next to the Server Name and you are able to update that field to change the Server Name.  However, I have no textbox here, and thus am unable to change the Server Name.  I've attempted factory defaults, firmware upgrades, and multiple reboots to attempt to solve the issue.  Any help out there? 
    Thanks in advance

    Whats the Firmware version is installed on your Router and whats the Version number of your Router? If it's an Version 2 Router, then it doesn't have an option to change the Server Name. As far as i know the Version 1 Router has an option to change the Server Name.
    If its an Version 1 Router and if you have updated the firmware, with the latest firmware you don't have an option to change the Server Name, By Default its WRT610N. 

  • E72 connected to wifi but 'invalid server name' pr...

    I had no problems connecting to the wifi at the mobile phone shop but have the 'invalid server name' problem at home. however, my husband who is using Nokia too has no problems using the home wifi on his phone. 
    it shows that the phone is connected to the wifi but when i try to browse, it tells me that the server name is invalid. I have had phone conversations with people from Digi, Nokia and the phone company all day long and this continues to be a problem

    Delete all browser privacy data.
    ‡Thank you for hitting the Blue/Green Star button‡
    N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

  • How to pass database logon info to a Crystal Report in a subreport with different server name using VS C #

    Post Author: fabu1971
    CA Forum: .NET
    I could pass the database logon in Reports with subreports but the reports with subreports with different  server name I can not pass the logon information . Do you have any idea how I can do that to pass the database logon with different database or server name ?

    Post Author: quafto
    CA Forum: .NET
    You can use the Subreports collection of the ReportDocument object to access all the subreports in your main report. These are returned as ReportDocument objects. Once you have your subreport as a ReportDocument you can loop through your Tables collection and set the ConnectionProperties to your appropriate Server/Database. For example here is some pseudo code: ConnectionInfo boConnectionInfo = new ConnectionInfo();boConnectionInfo.ServerName = "serverName";boConnectionInfo.DatabaseName = "databaseName";boConnectionInfo.UserID = "username";boConnectionInfo.Password = "yourpassword"; foreach(ReportDocument boSubreport in mainReport.Subreports){    foreach(Table boTable in boSubreport.Database.Tables)    {        TableLogOnInfo boTableLogOnInfo = boTable.LogOnInfo;          boTableLogOnInfo.ConnectionInfo = boConnectionInfo;          boTable.ApplyLogOnInfo(boTableLogOnInfo);          boTable.Location = "newtablelocation";     }}

  • Get error when passing a server name to Crystal Report

    I am developing a desktop application using VS 2012 with CRforVS_13_0_9 and CRRuntime_64bit_13_0_10 installed.  The database is SQL Server 2012 Express.  I use SQL OLEDB in Crystal Report to connect the SQL database.  Here is part of the codes.
    Dim crTableLogoninfo As New TableLogOnInfo
    Dim crConnectionInfo As New ConnectionInfo
    Dim crTables As Tables
    Dim crTable As Table
    With crConnectionInfo
    .ServerName = Login.sServer
    .DatabaseName = Login.sDatabase
    .UserID = Login.sDBUserID
    .Password = Login.sDBPassword
    End With
    Try
    crTables = CReport.Database.Tables
    For Each crTable In crTables
    crTableLogoninfo = crTable.LogOnInfo
    crTableLogoninfo.ConnectionInfo = crConnectionInfo
    crTable.ApplyLogOnInfo(crTableLogoninfo)
    Next
    CrystalReportViewer1.ReportSource = Nothing
    CrystalReportViewer1.ReportSource = CReport
    I get an error "Failed to open connection -- Database vendor code 17" when I run a Crystal Reports through my application.  The problem is Crystal Reports does not like the server name which is passed.  The purpose for passing a server name is to connect to different server if needed.  I am not 100% sure the error occurs after VS 2012 or SQL Server 2012 express was updated.
    Any ideas how I can fix this problem?
    Thanks,
    John

    Hi John
    First, you want to check the error code in your database documentation. The error is being passed from the db client through the report engine totally unmodified. Googling the error will also be a good idea.
    And, seeing as you are using SQL Server 2012, make absolutely sure that the SQL Native 11 client is installed.
    - Ludek
    Senior Support Engineer AGS Product Support, Global Support Center Canada
    Follow us on Twitter

  • Domain name/"primary DNS" name/mail host name/mail server name/mx name

    Hi,
    I have registered my domain name (N.com) with an external dns server and created an MX record (mail.N.com) for it as well. My server sits behind a router and internet traffic is port(80)-forwarded to my server's fixed internal ip address (I can access my webpages from the internet just fine). When I initially setup the server I was asked to give it a "primary DNS name." I naturally assumed that N.com was supposed to be entered here, but that just caused all kinds of problems (though I still do not understand why). So I reinstalled and currently have server.N.com as the primary DNS name of the server (although it shows up in Server Admin and Workgroup Manager as server.local--why is that?)
    I have had no luck getting any email from the internet with the default settings in mail services (domain name of N.com and host name of server.N.com). Having no luck with the defaults, I assumed that maybe I needed to change the host name to "mail.N.com" so that it matched the MX record. I also changed the user preferences in Workgroup Manager to receive mail from mail.N.com--but still no luck. Could someone tell me what I am doing wrong and how come none of the Mail Service literature mentions anything about what a mail "host name" is supposed to be? Is it supposed to be the same as the "Mail Server" name that Workgroup Manager asks each user for? and is it the same as the MX record name?
    I am just needing some help to connect all these variously named, but undefined, dots.
    Also, how come I can access webmail from the internet using www.N.com/webmail but can't do it from any computers within my physical network (I have to use IPaddress/webmail or server.local/webmail)?
    Also, should my user email addresses be [email protected] or [email protected] (which is the current default)?
    Thanks in advance and good luck!
    John

    I had been told by a friend that ... regular email coming in from the internet would go through port 80
    Unfortunately you were misinformed.
    My MX record needs the extra subname (such as "mail") in front of the domain name, right?
    Not at all. A MX record for 'N.com' is entirely valid (expected, in fact).
    An MX record tells remote mail servers where to send mail for any domain/subdomain. If you think about it, let's say you worked for Apple and you wanted people to be able to send email to [email protected], well then you need an MX record for 'apple.com'.
    You can see if you dig MX apple.com that they actually have 9 MX records, but the point still stands.
    Now, you might also have MX records for subdomains so that you can have [email protected], [email protected], [email protected], etc. Each of these subdomains would need a separate MX record.
    So, in general, for any set of email addresses @[anything.]domain.com you have a MX record telling remote mail servers where to send that mail.
    Of course the MX record name is mail.N.com, but I think you are implying that the in the Mail settings of Server Admin where it asks for domain name all I need to put there is the N.com, right?
    What I mean is that you need to set the domain name to whatever domain name you expect to receive mail at.
    If you want users to have email addresses in the form of [email protected], then you enter 'N.com'.
    If you want users to have email addresses in the form of [email protected] then you enter 'mail.N.com'.
    If you want both forms, enter one in the main domain and add the other(s) in the Advanced -> Hosting -> Local Host Aliases section.
    Is there anything in the Mail settings that needs to have the full MX record name (mail.N.com)?
    Yes. Either the 'domain name' or the 'Local Host Aliases' needs to contain the same thing as your MX record. That's because the MX record tells remote servers to send mail to this machine, but the machine won't accept the mail unless it is configured to do so.
    What is the "host name" supposed to be?
    This should be the name that remote servers see when this machine tries to send outgoing mail.
    Ideally this should match the reverse DNS of your IP address, that way when it connects to a remote server it says "Hi, I'm $hostname" and the remote server can lookup the machine's IP address and see the same result. This will reduce the problem of remote servers thinking you're sending them spam.
    If you only have a single IP address then this probably needs to be something like 'N.com'. If you don't have control over your reverse DNS then you're going to run into a problem.
    Also in the user accounts (in Workgroup Manager) what should the "mail server name" be? Is it the host name or the domain name?
    Off hand, I don't know.
    Also, why are all the default user email addresses [email protected] (the name I gave the server at setup)? Why doesn't the user accounts create [email protected] as the default address?
    Presumably because the mail server says it is 'server.N.com' and therefore any accounts on that machine would be [email protected]. Changing the domain name (as above) should fix that.

  • How to find out SSRS report server name

    I'm trying to follow the steps for using SSRS web services (http://ssrstutorials.blogspot.com/2012/10/lesson-12-using-ssrs-web-services.html).
    In Step 3:
    Click advanced--> add web reference -- url - http://localhost/reportserver/reportservice2005.asmx
    (replace localhost with your report server name).
    How do I know what's my report server name?
    Thanks, 

    Hi sherri71,
    Sorry for that mark an incorrect reply as an answer.
    The reply suggested by Akbar is about Instance Name, not report server name. Based on my further research, I find that the Reporting Services server name is the computer name which install
    the report server. So we can try to click Start button, right-clicking Computer, and then clicking Properties. Under Computer name, domain, and workgroup settings, you can find your computer name.
    If there are any other questions, please feel free to ask.
    Thanks,
    Katherine xiong
    Katherine Xiong
    TechNet Community Support

  • How to find out server name in reports9i

    hi all
    how to find out server name in reports9i
    i need the report server name to call a report
    thanks
    Edited by: vikas singhal on Nov 5, 2008 1:02 AM

    You do not need to do anything, if your Report server is on the same machine as the Forms server (which is usually the case) you simply use the url as
    /reports/rwservlet?report=myreport' and the server will automatically use the default report server.
    then you simply use
    web.show_document('/reports/rwservlet?userid=scott/tiger@orcl&report=myreport&desformat=htmlcss&desname=test.html'Tony
    Try it now
    Edited by: Tony Garabedian on Nov 5, 2008 2:00 PM

  • Report server name issue

    Dear All,
    I am stucking with the following problem,
    I have deployed my ERP apllication (developed in oracle forms & reports 10g) on oracle apllication server 10g forms & report services. my apllication server has two LAN card. out of two one has been configured with statis IP for web access. but while running report from parameter form i am taking report url from table. table contain report server name as my local server name.
    My problem is,
    If i am accessing erp from web using static ip and running report then server name is not recognized
    because it is my local server name coming from table. so for that every time i need to change report url & replace server name with statis ip in browser addr for web users.
    Please guide me what should i do to resolve this issue.
    Your reply would be greatly apprecited.
    Thanks

    If "Credentials supplied by the user running the report" is selected, when the report is run, the user will be prompted to provide credentials.  They would need to provide credentials that have the appropriate permissions (e.g., read, execute) to the
    database.  This prevents the double hop.
    If "Credentials stored securely in the report server" is selected, you have to enter the username and password of a user (or service account) that has the appropriate permissions (e.g., read, execute) to the database. When the report is run, SSRS will use
    these stored credentials each time to authenticate to the database engine and query the data.  Users running the report are not prompted to provide credentials.  With this option you can use an Active Directory or SQL Server account.
    In order to access/run the report, a user will need to authenticate to SSRS.  There are options here as well. You can provide them the link to the report manager and they can authenticate, navigate to, and run the report.  You can also provide
    direct links to reports that users click in a document or application.  At this point the user is typically still prompted to authenticate to SSRS.  You can also programmatically call the report using API's and essentially build a proxy that authenticates
    to SSRS and open the report.
    Not sure if that answers your question.

  • Connection Failed: The server "name" may not exist or it is unavailable...

    So I think I know what caused this problem, but I can't figure out how to make it stop...
    When I go to print, if I try to click on the pop-up to change the default printer setting, there's a LONG delay, then I get a dialog that says:
    Connection Failed
    The server "name" may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, then try again.
    Then there's another delay and I get the message a second time. I can then select any of my printer settings and print fine, it's just an annoying delay if I click on that pop-up accidentally or need to change it.
    I have a new iMac and I migrated from my old G5. The "name" of the server it is seeking is my old G5, so that must be in the settings somewhere, but I can't find it. I tried going into the Print & Fax settings in System Preferences, deleting the printer there, and then re-adding, but that didn't clear it up.
    Thanks for any insight you can provide!
    --John

    Hmm, well, this stopped working again for me. I tried swapping ethernet and re-installing the Airport client update - to no avail. I could always see my Mac shares from PCs though. However, I have (for now) managed to connect to the PC using ip address rather than name even though finder quite clearly sees the name. Does your printer connection work by ip rather than name ? I'm going to play name lookup detective for a bit now - it's some kind of Netbios name lookup issue I guess as I've no local DNS service. resolv.conf is apparently not used so a bit of learning to do! ...
    ... nmblookup seems to work but nslookup doesn't. Looks like SL connect via Finder isn't using nmblookup properly and I can't see how to make that work. When this gets reported enough it should get a publicised work-round or a fix. If only I can get dig/nslookup to slave out to nmblookup ...must be something I can configure for that ??

  • '"Connection Failed" : The server "rrnas01" may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again' message

    '"Connection Failed" : The server "rrnas01" may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again' message keeps displaying whenever I try to open any Adobe CS5 applications (except for Adobe Acrobat Pro). It displays until I click "OK" about 15-20 times or so and then will finally let my program open.
    I have tried deleting files within my Library/Preferences folder and turning off/deleting login items within my system preferences as other forums suggested but nothing happened. Spending 3.5 hours on the phone with Adobe and completely uninstalling and then reinstalling the entire CS5 Master Collection didn't work either.
    Also, it may be helpful to know that my programs worked fine for about three weeks then when we got internet and changed the password (the join, not the adminstrative password) with the wireless network "ScubaSteve" (which I've used with no problems at my old apartment) it started acting up. I have never seen "rrnas01" before so I don't know at all where it came from. I also installed the free 30 day trial of Suitcase Fusion 3 recently, but thinking that could also be the cause I have uninstalled it, and still no help.
    Please help me! And please keep in mind I don't know all the computer lingo that a lot of the people in these forums seem to know. Thanks in advance for ny help you can give me.

    It may not be possible .. there is a major bug between Mountain Lion and the TC where the TC disk goes off the radar of the computer.
    Lion is also affected but not as badly.
    7.6.4 seems worse than earlier firmware.. so back to 7.6.1 or 7.5.2 if that is possible.
    Obviously that is not a solution for a later Gen5 TC.
    Reset to factory after the firmware downgrade. .use all network names that are short, no spaces and pure alphanumeric.
    If the TC is the main router set the dhcp to a very short lease time.. eg 30min.. and see how it goes, or try a longer lease like 99days.
    I prefer the very short lease but response has been mixed.
    Use ethernet not wireless.. ethernet is always more reliable and stable than wireless.
    And last .. a nightly electric timer that powers off every night at midnight for 1min.. would not be the first device we have suggested a fix that amounts to beat the unit to the punch by forcing it to reboot since it is unstable.

  • Like i said Microsoft outlook keeps coming up in my iTunes and a box with server name i ,v tried all the server names on my account and it will not work and now my iTunes account is  stuffed

    I,m sorry but i,v a enough of all these **** problems Microsoft has been on help with helping me fix this problem i,v tried everything to fix it and i do know that i,m not talking to Apple like i said this outlook from Microsoft keeps coming up every time i start my iTunes up and then it has a box with enter server name and i,v tried all the server names on my laptop and it will not accept any of them I,v spent a heep of money already with computer people and my laptop is now more stuffed and i don,t trust anyone any more my computer bloke stufhfed my iTunes account up as well and tried to tell me i had to upload a new iTunes and i fixed it up and i,v never done a computer coruse in my life sorry for the all the chat but i,m just sick of all the scams just to get money out of you one more thing my iCould is not backing up to my iCloud as well so where is all my dtuff gone to so much for security

    Ande i,v got on idea where to see your relpys here this is all new to me like where are your messages here thank you

Maybe you are looking for

  • We have two ipads in the house and sync on one computer.  How do we switch between apple id s

    We have two ipads in the house with separate apple IDs.  How do we switch between these on the only laptop in the house

  • In Spotlight, Why can't I see the file location?

    There has been a loss of a feature from 10.6 SL or 10.7 Lion.... When I search for a file in Spotlight, I want to see the file location. Instead, I get the file preview. Is there a way to set a perference so I can actually "find" my file in the folde

  • Bug in layer resize.

    I reported a bug today I feel could do some nasty thing to document when you use resize() to re-size a layer. Particularly if you have used suspend history.  It looks like resize for some unknown reason backs the document up one history state before

  • ODI-15605: Multiple ordered joins in this dataset use the same order number.

    I get this error but only have 3 ordered joins numbered 10, 25 and 30; I also have ten lookups specified as left-outer joins. I presume the lookup joins also have order numbers. Does anyone know how to find out those order numbers? (For the moment I'

  • Closing a new document with textvariable

    1. In Indesign CS4 version 6.0.2 , if I create a new document and insert a textvariable, I can save the document and I can close it. 2. In scripting Indesign CS4 version 6.0.2 with VB.net (Visual Studio 2008 + Framework 3.5),if I open a document manu