SLoader Question - Error

Hi all,
would like to use ZfS 6.5 MMS. Installed the product for testing on VMware
and physical no name machines some times with no errors.
Now on a HP/Compaq ML370 Server Machine, when starting the sloader.ncf the
system begins with
<----- Initializing sloader -------> ... and nothing else!
It only loads the jncpv2.nlm and than stops. There is nothing to find in
the Log files, they are empty, no error messages on the console. Startet
the box twice to ensure everything is ready. Installed ZfS 6.5 SP1a -
does'nt matter...
It's a NW 6.0 / SP5 box.
Did someone experiaence the same problem?
Greetings
David

Sorry Jared, this is MMS, so the log is in ZENWORKS\MMS\LOGFILES\SLOADER
Do you have a replica on the server?
Ron
"Jared" <[email protected]> wrote in message
news:7NW7e.360$[email protected]..
> Sounds like a java issue.
>
> In your pds/smanager directory there is a zfsinit.log file, does it hold
> anything.
>
> --
> Jared
> Novell Support Forums SysOp
> Systems Analyst with Data Technique, INC.
> Kansas City, MO
>
> Using XanaNews 1.16.5.2 as a News Reader
>
> Novell eDirectory Services 1.6 Billion users worldwide
> 81% 0f Fortune 500 use Novell's eDirectory
> Novell Desktop Management 40 Million users worldwide

Similar Messages

Question error message 150:30

error message 150:30--can't access EDIT--can do ORGANIZE--message says "license stopped working"

thx--
Date: Sun, 2 Feb 2014 18:59:21 -0800
From: [email protected]
To: [email protected]
Subject: question error message 150:30
    Re: question error message 150:30
    created by mytaxsite.co.uk in Photoshop Elements - View the full discussion
Without further info regarding your version and operating system, I sugge4st try this link:
<http://helpx.adobe.com/creative-suite/kb/error-licensing-stopped-windo ws.html>
This error is pretty common and googling for it will generate many different solutions.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6079421#6079421
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6079421#6079421
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6079421#6079421. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Photoshop Elements at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Sharepoint 2010 question : Error while deploying wsp file in using managment shell (power script)

When I tried to deploy the wsp's using managment shell (power shell scripts) everything looks good.
When I go and take a look the "manage farm solutions" thru sharepoint central admin, I see the deployment failed in two servers.
Error is
Could not load file or assembly 'c:\windows\Temp\solution-cxxxxxxxxxxxxxx\xxx.xxx.dll" or one of its dependencies. Access is denied.
Can you please let me know what could be the reason.
Note : I have two app servers and two web servers setup. The deployment is sucessful in 2 apps servers . but 2 web servers are giving error.
Thanks
Pichaimani

Hi,
According to your post, my understanding is that you wanted to failed to deploy the wsp's using managment shell.
You need to make sure that the dll is registered in the GAC.
Go to %Windows%\assembly. If the dll isn't there , you need to install it to the GAC on the server. Simply drag it into that folder in Windows Explorer, and it should install itself.
Here is a similar thread for your reference:
http://stackoverflow.com/questions/1265505/sharepoint-could-not-load-file-or-assembly-the-system-cannot-find-the-file-sp
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Build Question: error 7 occurred at source does not exist

I have VIs built in LabVIEW 6.1. It works and built well. In LabVIEW
7, It works well. But when I try to build it. I got error.
I first use the mass conpile to compile VIs and then build the exe
with default settings. I got:
Error 7 occurred at source does not exist
Possible reason(s):
LabVIEW: File not found. The file might have been moved or deleted,
or the file path might be incorrectly formatted for the operating
system. For example, use \ as path separators on Windows, : on Mac OS,
and / on UNIX.
NI-488: Non-existent board.
But It does not point out which file does not exist.
Anyone can help me out?

Hello yqin,
Here are some more KnowledgeBases that may pertain to your issue.
Error 7 When Building Applications and DLLs That Use the LabVIEW Report Generation Toolkit
Why Do I Get Error 7 When Building an Executable from a Build Script?
Error 7 at Invoke Node When Building a LabVIEW Executable
If the above KnowledgeBases do not work, we will want to try the following procedure.
1. Open your Main VI.
2. Hold + a
nd click the run arrow (forces recompile).
3. Close the VI and mass compile it.
4. Keep the VI closed and build the application from scratch (do not use a script).
5. Ensure that all VIs called dynamically are included as support files before building.
Please let me know if you have any questions,
Matt
Keep up to date on the latest PXI news at twitter.com/pxi

Oracle + Unix question , Error validation for SQL statements in co process

Hi,
If I use co process in a shell script , what is the best way to do the error validation of the execution of any sql statements . I was trying to change the following code to make use of co process concept. When I tried echo $? after the execution of a "wrong statements"
it is still giving Zero output ( meaning success)
<<<<<<<<<<<<<<<<<<<<<<<<<<<
cat ${CFG_DIR}/srs_indx.lst | egrep -v '^#' | egrep -v '^[    ]*$' | while read x
do
echo " Processing values :: pre $pre tbl $tbl indx $indx tblspc $tblspc cols $cols param $param" >> ${LOGS_DIR}/srs_indx.log
sqlplus ${BIZSTG} << EOT >> ${LOGS_DIR}/srs_indx.log
set verify on timing on term on echo on feedback on serveroutput on
WHENEVER SQLERROR CONTINUE
drop index $indx;
WHENEVER SQLERROR EXIT FAILURE
alter session set query_rewrite_enabled = true;
create $pre index $indx on $tbl ($cols)
tablespace $tblspc
$param;
exit
EOT
RC=$?
if ( test $RC -ne 0 )
then
     ERR_MSG="ERROR in creating index $indx for table $tbl from srs_indx.ksh of $ENVIR : $APP by `whoami`@`hostname` on `date` "
     echo $ERR_MSG >> ${LOGS_DIR}/srs_indx.log
     process_warning ${LOGS_DIR}/srs_indx.log
     exitstat=1
else
     echo "$indx created at `date`" >> ${LOGS_DIR}/srs_indx.log
fi
done
>>>>>>>>>>>>>>>>>>>>
Any help will be appreciated .
with thanks and regards
Ranjeesh K R

Hi,
Thanks for the response, I guess people misunderstood my question .
My question was about "error handling in case of CO PROCESS". For those who don't know about this, in case CO PROCESS you just need to login once to Oracle. In my above code It is logging in & out for each entry in the list. CO process statements may look Similar to SQL statements in pro*C. In PRO*C we use EXEC, but here print -p statements..
a sample is given for those who are new to co process.
sqlplus -s /nolog |& # Open a pipe to SQL*Plus
print -p -- 'connect user/password@instance'
print -p -- 'set feed off pause off pages 0 head off veri off line 500'
print -p -- 'set term off time off'
print -p -- "set sqlprompt ''"
print -p -- "select sysdate from dual;"
read -p SYSDATE
print -p -- "select user from dual;"
read -p USER
print -p -- "select global_name from global_name;"
read -p GLOBAL_NAME
print -p -- exit
echo SYSDATE: $SYSDATE
echo USER: $USER
echo GLOBAL_NAME: $GLOBAL_NAME
But I got stuck during error handling of these SQL statements, especially the $? / $* returns 0 even after an erroneus execution.
Regards

Newbie Question - Error in Transaction SFP - Layout Tab

Hi All,
When I go to the "Layout" tab in transaction SFP, I get the following message:
"Error occurred in communication with layout editor"
Have my BASIS department forgotten to install something, or is there some config required in SPRO?
Thanks,
Tristan

Hi Pavan,
It wasn't installed on my PC. I have the Netweaver Developer Studio CD, with which I can install the Adobe Designer, but when I try to do that it asks for the path to my Java SDK directory.
I know this is a stupid question, but is the SDK something I also need to install on my PC, or something that needs to be installed on our SAP server?
Thanks,
Tristan

Reconcile question: Error iterating accounts for resource:

Guys,
One question. While trying to reconsile my MS SQL database table it fails and I'm getting the next error message:
Error iterating accounts for resource :
java.lang.NullPointerException
Any Idea what might cause this error. All other resources are reconsiling just fine...
Thanks.
Elger

Unfortunately that didn't help. I deleted the whole account index just to make sure all 'links' where gone but I'm still getting the null pointer exception.
Any more idea's?

3 security questions error

when i was dowloading apps it suddemly ask for 3 security questions. I got an timeout error every time. cant get past it.
Ilooked at some forums and there was asolution to go to itunes and chance questions her. but i did not work for me.
Everytim i try to save i got and wrong password. ??? wathever i do i cant save, cause i got this error.
i start to get frustrated and cant figure out whats wrong.
I have offcourse tryed to turn it off and on.
anyone who have a solution to this problem ??

1) Quit App Store in multi-tasking.
•From the Home screen, click the Home button twice.
•Tap and hold on the app.
•When it starts to jiggle, tap the red in the top corner to close it;
***Please close all open apps on your phone***
2) Tap Settings.
3) Tap Safari.
4) Tap Clear History.
5) Tap the Clear History button.
6) Tap Clear Cookies and Data.
7) Tap the Clear Cookies and Data button

GETVPN Question (error output)

Dear All,
I have question about getvpn, when i run getvpn , my getvpon (ks and gm) comes up but after a minutes comes down and star to register.i have some error output.
my configuration on KS :
crypto isakmp key cisco address x.x.10.2
crypto ipsec transform-set cisco esp-3des esp-sha-hmac
crypto ipsec profile GET
set transform-set cisco
crypto gdoi group test
identity number xxxx
server local
rekey retransmit 10 number 2
rekey authentication mypubkey rsa cisco
sa ipsec 1
profile GET
match address ipv4 112
replay counter window-size 64
Configuration on GM :
crypto isakmp policy 10
encr 3des
authentication pre-share
group 2
crypto isakmp key cisco address x.x.11.1
crypto gdoi group test
identity number xxxx
server address ipv4 x.x.10.2
crypto map GETVPN local-address ethe0/1
crypto map GETVPN 10 gdoi
set group test
=============================
Output error is :
%GDOI-4-GM_RE_REGISTER: The IPSec SA created for group test may have expired/been cleared, or didn't go through. Re-register to KS
how can i solve this problem.
Thanks

Hi,
Is this affecting one GM or multiple ones?
Is the GM reciving rekeys properly?
During problem is it visible on KS as GM?
You should be able to temporarily recover by doing "clear crypto gdoi".
M.

Acrobat 9 deployment question: error initializing interpreter

I've tried deploying Acrobat 9 silently at (3) client sites with the same result. In all cases the installation finishes with this error message:
Error initializing interpreter: Fatal error
Further patches from this point on will fail to patch the Distiller component, though a repair seems to fix it. Here are the things I have tried to far to no avail. Does anyone have any ideas?
Deploying with the following command-line options:
msiexec.exe /i path\to\AcroStan.msi TRANSFORMS=path\to\AcroStan.mst /QB-
msiexec.exe /i path\to\AcroStan.msi TRANSFORMS=path\to\AcroStan.mst /QB!
msiexec.exe /i path\to\AcroStan.msi TRANSFORMS=path\to\AcroStan.mst /QR
msiexec.exe /i path\to\AcroStan.msi TRANSFORMS=path\to\AcroStan.mst /QN
I have tried this while deploying the following versions:
Acrobat Professional 9.0
Acrobat Professional 9.1
Acrobat Professional 9.2
Acrobat Standard 9.0
Acrobat Standard 9.3.1
I have tried creating an administrative install point as outlined in the deployment guide, but the result is the same.
I have tried installing manually as a domain administrator and with our software distribution tools.
I am out of ideas.

Acrobat is deployed by SCCM => error message
Manual installation works => No error message
it seems that the problem comes from SCCM

Library Backup Question/Error

Well, 3 months and 657 CDs later, I just finished moving everything to itunes (YAY). Now I am trying to backup. I started the process and it told me it would take 16 DVDs. So last night I was putting them in and swapping them out every 10 mins or so and here's what happened:
When it got to DVD #6 it locked up...So I shut down itunes and took a look at what was on the DVD. The music files are there but when I try to open it in itunes it says something to the effect of "error with this DVD...cannot read".
So I started backup again, this time with the option of "backup only files since last backup". So it said I needed 10 DVDs...okay great, it was starting at the right place.
However, on DVD 9 the same thing happened....then it happened again at DVD 11.
Any thoughts on what would cause this? Has anyone had success backing up a library this large or larger? Should I just do it outside of itunes via some other method or is the itunes backup process usually pretty good?
I may just start over and make sure I close all other programs because I have no idea why it's not working. Any insight would be appreciated. Thanks!!!

Nowadays people don't back up to CD/DVD. They get an *external hard drive* and copy over their entire iTunes folder, and whatever else they are backing up.
The advantages are (1) this method does not depend on iTunes's horribly unreliable burning capability (2) you can look at the external and see that the stuff you backed up is really there. (If you want to see an unhappy person, it is when they try to restore from CD/DVD and discover that it did not burn correctly in the first place.) (3) it lets you back up your other valuable files besides your music.
Give an external drive serious consideration. As you are seeing, your library is much too large to go the DVD route.

PL/SQL Question Error while Executing

Hi Experts,
This is the SQL Procedure i have which delete a set of order number which are closed
CREATE OR REPLACE PROCEDURE closed_test1(tabname varchar , v_rowcount_int OUT number)
is
v_sql varchar2(4000);
begin
v_sql:='delete from '||tabname||' fac where exists (select order_nbr from closed_order cl where fac.internal_order_id= cl.order_nbr)';
execute immediate v_sql;
v_rowcount_int := sql%rowcount;
dbms_output.put_line(v_rowcount_int||' rows deleted');
commit;
end;
I am using an ETL tool to print the number of rows deleted, So i had to create an output parameter and assigned it to the sql%rowcount
When i execute
Declare
v_rowndel number;
exec closed_test1('COST_TRANS_TABLE',v_rowndel);
I get this error message
ERROR at line 3:
ORA-06550: line 3, column 57:
PLS-00103: Encountered the symbol "end-of-file" when expecting one of the
following:
:= ; not null default character
I dont understand what the problem is!! Is it because i dont have an exit statement but the sql statement is interlooped
Any help is apprct in advance
Thanks
AJ

You're trying to mix PL/SQL with something PL/SQL has nothing to do with.
exec is a SQL*PLus thing and was never part of PL/SQL:
sys@cr2> declare
2 a number;
3 exec dbms_output.put_line('a');
4 /
exec dbms_output.put_line('a');
ERROR at line 3:
ORA-06550: line 3, column 31:
PLS-00103: Encountered the symbol "end-of-file" when expecting one of the
following:
begin function pragma procedure subtype type <an identifier>
<a double-quoted delimited-identifier> current cursor delete
exists prior
sys@cr2> declare
2 a number;
3 begin
4 dbms_output.put_line('a');
5 end;
6 /
PL/SQL procedure successfully completed.

Forms question - Error validation

Gurus,
I have a question .. Please suggest me a suitable answer .. I am using forms 6i, in which i have created a data block (which isnt associated with a table or any procedure), in which i have 3 items, custno (customer number), custname (customer name), toknno (token no)..Its a multi record block (displaying 10 records at a time) ..
Now when i enter value 1 in custno, ABC in custname, A1 in toknno items, and when i move to the next custno text item, if i once again enter 1 in the custno text item, immediately it should display a message stating that "value has been entered already" ... it should happen only for custno ...
One important thing is, i amnt saving changes to database .. I amnt marking the text item as a unique key (without marking as unique key in the property sheet), i should get the solution
Can any guru help me
Regards

Hi Here is the code...
May be it will be useful..
When-New-Form-Instance
DECLARE
            rg_name VARCHAR2(40) := 'RG_EMP';
            rg_id    RecordGroup;
            gc_id    GroupColumn;
            errcode NUMBER;
BEGIN
            rg_id := Find_Group(rg_name);
            IF Id_Null(rg_id) THEN
                        rg_id := Create_Group(rg_name);
                        gc_id := Add_Group_Column(rg_id, 'EMP_NO', NUMBER_COLUMN);
            END IF;
            errcode := Populate_Group_With_Query( rg_id,'SELECT EMPNO FROM EMPLOYEE ORDER BY 1');
END;
When-validate-Record
DECLARE
            rg_name VARCHAR2(40) := 'RG_EMP';
            rg_id    RecordGroup;
            gc_id    GroupColumn;
            errcode NUMBER;
            the_rowcount NUMBER;
            V_VAL              NUMBER;
BEGIN
           MESSAGE(' ');
            rg_id := Find_Group(rg_name);
            IF Id_Null(rg_id) THEN
                        --MESSAGE('rg not exist');MESSAGE(' ');
                        rg_id := Create_Group(rg_name);
                        gc_id := Add_Group_Column(rg_id, 'EMP_NO', NUMBER_COLUMN);
                        Add_Group_Row( rg_id, END_OF_GROUP );
                        Set_Group_Number_Cell( gc_id, 1, :EMPNO);
            ELSE
                        the_rowcount := Get_Group_Row_Count( rg_id );
                        --MESSAGE('record count'||the_rowcount);MESSAGE(' ');
                        IF the_rowcount > 0 THEN
                                    FOR I IN 1..the_rowcount
                                    LOOP
                                                V_VAL := Get_Group_Number_Cell( 'RG_EMP.EMP_NO', I );
                                                IF V_VAL = :PARAMETER.P_EMPNO THEN
                                                            MESSAGE('DUPLICATE RECORD');MESSAGE(' ');
                                                            RAISE FORM_TRIGGER_FAILURE;
                                                END IF;
                                    END LOOP;
                                    Add_Group_Row( rg_id, END_OF_GROUP );
                                    Set_Group_Number_Cell( 'RG_EMP.EMP_NO', the_rowcount+1 , :EMPNO);
                        ELSE
                                    Add_Group_Row( rg_id, END_OF_GROUP );
                                    Set_Group_Number_Cell( gc_id, 1, :EMPNO);
                        END IF;
            END IF;
END;     Check it.....
One more thing is U need to check that Column data type .whenvever u r adding a column in Add group column check whether is it number_column and char_column like wise u should give and Same as in Get_group_number_cell and set_group_number_cell .

Question error message photoshop CS3

I have a MacBook Pro and have good luck using CS3 extended. A couple of days ago when I opened the program and I received an error message: 'Your license is no longer active". I purchased program update via the internet last June so I am legal. The window popup says to 'reinstall the program'
. I can reinstall photoshop 7 but how do I reinstall the CS3 upgrade since I have purchased over the internet?
Any help appreciated.

I suddenly started getting the same error message and was reaching my wits end in trying to find a solution.
This may sound bizarre, and you may not have the same situation as I found, but check your system/Windows date setting.
Somehow, the year on my system had become 2096. I corrected it, and bingo! PSE 8 Editor works again.

Simple Socket Question / Error...

I'm testing out a socket connection for an RDP app on the playbook.
Flash Builder Burrito 4.5
Adobe AIR SDK 2.5 Hero
Playbook SDK 0.9.2
Playbook Sim 0.9.2
VMPlayer running in Bridged Networking mode
public function RDPApp()
               var socket:Socket = new Socket();
               socket.addEventListener(Event.CONNECT, onConnect);
               socket.addEventListener(IOErrorEvent.IO_ERROR, onIOError);
               socket.addEventListener(Event.CLOSE, onClose);
               socket.addEventListener(SecurityErrorEvent.SECURITY_ERROR, onSecurityError);
               socket.addEventListener(ProgressEvent.SOCKET_DATA, onReceivedData);
               socket.connect("http://www.google.com", 80);
               socket.close();
               stage.nativeWindow.visible = true;
          private function closeWindow(event:MouseEvent):void{
               stage.nativeWindow.close();
          protected function onConnect(event:Event):void
               // TODO Auto-generated method stub
          protected function onIOError(event:IOErrorEvent):void
               trace(event);
          protected function onClose(event:Event):void
               // TODO Auto-generated method stub
          protected function onSecurityError(event:SecurityErrorEvent):void
               // TODO Auto-generated method stub
          protected function onReceivedData(event:ProgressEvent):void
               // TODO Auto-generated method stub
The code above throws on the sim and on the desktop:
IOErrorEvent type="ioError" bubbles=false cancelable=false eventPhase=2 text="Error #2031: Socket Error. URL:http://www.google.com" errorID=2031]
Googling this error message indicates that the client flash app has not received the required policy file from the server.
I was under the impression that AIR apps running on the desktop sandbox (Playbook included) do not require the retrieval of the policy file.
Any help is much appreciated.
Matt

For sockets you need to first load the securitypolicy file then call methods on it.
ref : http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/flash/net/Socket.html
Message was edited by: saisri2k2

SLoader Question - Error

Similar Messages

Maybe you are looking for