SLOT 1 on Intel iMac is bad?

Hi all,
When I use SLOT 1 on my 1st gen Intel iMac 20", my computer randomly reboots after running a few programs. Very highly annoying.
I've run MEMTEST with some interesting results that don't totally make sense but here they are:
This test is done in Single User Mode, OS X 10.5.2 with PC5300 DDR2 667MHz OWC RAM.
First Test Run for RAM stick A:
SLOT 0=Pass
SLOT 1=Fail but did not reboot on its own
Second Test Run for RAM stick A:
SLOT 0=Pass
SLOT 1=Pass
First Test Run for RAM stick B:
SLOT 0=Pass
SLOT 1=Fail with self-Reboot (computer restarted on its own)
Second Test Run for RAM stick B:
SLOT 0=Pass
SLOT 1=Fail with self-Reboot (computer restarted on its own)
It seems that with RAM A it doesn't reboot by itself in SLOT 1 but it will reboot if RAM B is in SLOT 0.
All signs point that SLOT 1 is faulty.
Is there a way to fix this by zapping the PRAM? or any other suggestions?
Thanks,
Paul

I couldn't tell you. You'd have to take it in to get it diagnosed in order to get an estimate. If it is indeed a motherboard, then it's fairly expensive.
You could run with just a single module, but understand that if the board is defective the resale value of the computer drops dramatically. A diagnosis and estimate will cost less than $100 (and applies to the repair if you choose to have it fixed.)

Similar Messages

Intel Imac with bad logic board.

The logic board on my 20" Intel Imac failed(according to the diagnosis form the tech at the Apple Store) and will require a $900+ dollar repair....a tad bit high considering it's age, the cost of the machine in late 2006 and the going prices of the new Imacs! Anyone know of a lower priced repair option or a way to salvage the machine, or is it now a very large paperweight?
I know that I apparently should've gotten Apple Care, but I've never had such a catastrophic Mac failure in the 12 years I've been dealing with the machines. Judging by the lines/wait for service at the Apple store maybe it's a good idea next time...although with all the problems the new machines seem to be having it seems a bit like extortion and maybe they should just raise the prices and include it.

I have a similar problem that I'll describe hoping that it will contribute to this discussion and I'll ask a couple of questions. In December 2007 I bought an iMac 24 inch maxed out for speed and RAM and with the 750 gig hard drive. I had no problems until about three weeks ago when on startup I got grey hash marks all over the screen. When I selected the entire screen the grey hash disappeared and the computer seemed to run normally. I thought the problem was software related and began the long process of trying to find the culprit. Then two days ago I connected a video camera to the iMac to test the camera for the first time. It's a loaner from my school and is five years old. It seemed to be working fine. I then turned off the camera but left it connected to the computer by the firewire cable and put the computer to sleep. THAT was probably a mistake. When I tried to wake the computer it would not respond. There was a DVD in the machine and when I pushed the power button I could hear the DVD player makes it startup sounds and could hear the CD spin. Also I could hear the fans come on but the startup BONG never sounded. I disconnected all cables, pulled out the power cord for various lengths of time from 30 seconds to ten hours but nothing changed. I called Apple this morning and was told it sounds like a blown logic board which is what I was thinking. They will pick up the iMac day after tomorrow. When I talked to the Apple person this morning it didn't occur to me to ask about my chances of getting this repair done for free since I'm still within the one-year warranty period. I'll call when they open tomorrow morning but what are my chances of getting the repair done free? I've been using Macs since the Mac Plus came out but have never had a failure within one year so have no experience with the warranty. I did not buy Apple Care for this computer and never have but I will the next time. Thanks in advance for any comments.

Really BAD 3D Performance on Intel iMac

Hello all,
I have like 2 weeks with a new Intel iMac 20" (C2D 2.4Ghz / 256MB ATI Card / 1Gb RAM) had no problems so far, until today. I decided to install Vista thru Boot Camp (I know I should have installed XP, but Vista is all I got) for games, so I downloaded a few demos to check if it was any good with 3D gaming, installed GRAW2 and NFS Most Wanted, these are not cutting edge games and I tought they should run perfectly smooth as my iMac is superior than recomended specs for those games, well they didnt run well, not even playable at even low resolutions (640*400 / 800*600) the games looked all jerky and slow, really painfull performace, I tought, well, maybe the drivers didnt installed correcly, reinstalled drivers, nothing, erased and reinstalled Vista and drivers, still same problem, even tried games under OS X, HALO Universal and DOOM 3 Demo, again not cutting edge games, they run really bad even on low settings, and I mean painfully slow, so this is not only on Windows.
This is not acceptable for a computer with these specs, even my 2 year old PC (AMD Athlon 3400+ / 1Gig RAM) with Vista and integrated graphics runs DOOM3 and F.E.A.R. at playable levels on medium quality settings @ 1024*800, its not even fair.
My Mac OS version is 10.5.2 and all current updates have been installed, the problem seems to be only with 3D graphics in both Windows and OS X as it plays Quicktime 960p HD videos and all other graphic media as smooth as butter on a hot pan. Does someone else has this issue or knows what to do to solve it?... It is really frustrating.

You probably did not install the drivers for the video hardware (on the Windows side).
My Mac OS version is 10.5.2 and all current updates have been installed
That would have nothing to do with 3D performance when booted into Windows.
Here's the forum category for Boot Camp users. You should also ask your question there.
http://discussions.apple.com/category.jspa?categoryID=237

20" intel iMac is having bad week, "Sleep" hiccup, now can't find system

Hi all,
I'm running a 20" intel iMac, purchased new in January 2008. It's been a trooper.
A handful of days ago, it developed an odd glitch. The fan would "power down" like what one hears when the computer would go to sleep -- but this would be in the middle of use. It would immediately come back up. No screen dimming. On most occasions, this would take down open and in-use programs (for example, Safari).
Today it again did this, and shortly thereafter, the system "froze" (cursor was movable but no reaction from any open program; no visible activity from anything running). I rebooted by holding the power key for 10 seconds, waited for some time (±15 minutes), then came back to power it on. It powers up, fan spins up, white screen with apple and the spinning wait icon (not the beachball, but the "clock lines" one normally sees at restart). It does not progress beyond this point.
In short, I see this as two troubles that I need help with.
1. The system was damaged/corrupted during the last startup, and the drive can no longer see it.
2. There is a problem with the fan, a possible overheating issue, or perhaps an issue with a power module/SMC. The fact that programs are crashing with this makes me somewhat skeptical of this being merely "dusty fan" or even common overheating.
I'd like an idea of what steps to take next, either to diagnose what is wrong with my iMac, or to bring her back to health.
Message was edited by: gwenners

HI,
Unfortunately, it sounds like the startup disk needs replacing.
Boot from your Mac install disk and run Disk Utility.
Insert your install disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
*(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)*
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
Select your start up disk and click Restart
While you have the Disk Utility window open, look at the bottom of the window. Where you see Capacity and Available. *Make sure there is always 10% to 15% free disk space*
If you cannot boot from your install disc, try booting in Safe Mode
What is Safe Mode
If the hard disk appears to be ok, you could try Resetting the SMC
Carolyn

Intel iMac randomly relaunching Finder. RAM problem?

Several months ago I bought a new 3.06 GHz Intel iMac with 2GB of RAM. I also bought CS4 so I maxed out my RAM at 4GB with a 2x2GB RAM kit from Other World Computing.
I've noticed in the lately that everything will suddenly hang, the Dock won't appear when I cursor to the bottom, and then my desktop pic will change. I have my prefs set to choose a random one each day but this isn't happening at the right time, it's random. Not only that but if I open Dashboard after that it has to reload all of my widgets again. Plus any docked Finder or app windows pop back out to the desktop. It's like the Finder is being relaunched or something.
I'm wondering if this could be an issue with bad RAM or not having enough. With email, browser, FTP, time logger, and a few smaller apps going I can never really have more than a couple of the CS4 apps open without things getting sluggish. I try to avoid having more than 2 open at any one time. I've even dropped Photoshop's RAM usage settings from 70% to 60% to see if it makes any difference.
The problem is still happening and it seems to be happening more frequently. Things just relaunched and I went into Mail to minimize an email window. As soon as I clicked the yellow button things hanged again but not in the same way. No windows would minimize, the Dock wouldn't appear and I couldn't switch Spaces. When I went to restart, as soon as my cursor rolled over the Dock item in the Apple menu it stalled there for a short time before I was able to go down to restart. Then the restart sequence stalled and I had to force a shut down.
This is really frustrating as I was expecting a great new machine and software to replace my aging PowerMac G4 and older apps. Is there a way to test for bad RAM or does this sound like a known issue with CS4 or iMacs in general? I don't have the original 2x1GB RAM sticks any more, I sold them after installing my new RAM.
Any help would be greatly appreciated.

I've been trying a few things here and there when I've had time, giving time in between to see if the problem reoccurs. So far I've done the following:
1. Repaired Permissions. No effect.
2. Used Onyx to clean the System, User and Font cache options listed by default. It also told me that S.M.A.R.T., startup volume, Permissions and Prefs are all ok. No effect.
3. I removed the RAM, inspected the boards and the slots. Can't see any sort of damage to either. I replaced the boards but swapped slots. Both boards are firmly seated. Also no effect.
I'm going to try running 1 board at a time, swapping slots if the problem continues. If it does I'll try creating a 2nd admin account and go from there.
I've also noticed at times when the hang happens it seems to be when I click on an item in my Dock (usually a folder of items). There have also been times that after it happens I'll switch to another space and the windows for different apps will have disappeared. The apps are still open but if I try choosing the missing window under View or Window they still won't appear. Same goes with trying to use Show All under the Finder menu.

Why is my Intel iMac restarting randomly and USB keyboard not working randomly?

My intel iMac has been randomly rebooting itself without any error messages. It also seems to coincide with the keyboard (USB) not working, but not always. At first, it seemed to happen right after waking the computer from sleep, but now it happens when I am just sitting at the computer about once or twice a day. For now, i have temporarily removed all external devices (except time capsule) and disabled any bluetooth or iTunes synch'ing over wifi. I have also disabled all power management features.
I've tried different keyboards and resetting the SMC. Could bad memory cause this?

Could be anything from a loose power cable, to loose or bad RAM module.
1. Check all your power connections, including the mag connector on the back of the iMac.
2. Reinstall the RAM modules, as per > iMac: How to remove or install memory. When installing new or reinstalling RAM, be sure to push firmly on each module with both thumbs to insure that they are fully seated in the slots.
Then if it is still acting up...
3. Run the > Extended Apple Hardware Test

An Intel iMac AND a MacBook Pro for Logic Pro?

I am torturing myself over this issue lately so any input you guys could offer would be welcome!
This is the situation:
After 3 months of serious debating whether to purchase a 20" Intel iMac or a MacBook Pro for Logic Pro, I went ahead about 3 weeks ago and got the iMac. My reasoning behind this was that even though I found the portability of the MBP very desirable, the iMac simply represented a better value with the big screen and bigger hard drive. Since getting it, I must say I love this machine and I have not had one single problem with it. Logic 7.2 runs like a dream on it. By the way, aside from maintaing my iTunes Library, occasional iLife stuff and web surfing with Safari, this iMac is for music production only.
But here's the problem:
Still, I can't seem to shake the desire for OCCASSIONAL portability. Keep in mind, I am only a "serious" music hobbyist; I create instrumental hip-hop, trip-hop, electronica style of music mainly with software instruments, loops and breakbeats. So needless to say, I don't tour or do a lot of travelling. But the prospect of being able to compose tracks or make beats in Logic anywhere is DESIRABLE to say the least. I could compose while sitting on the couch watching a game or laying in bed - even though I have no idea of how often I'd actually do that, just having the ability to do it is VERY APPEALING to me. Throw in the fact that the iMac currently shares deskspace with a PC that my wife uses - meaning that I often have to stop what I'm doing to let her use the space. With a laptop, I could move and still continue my flow. Lastly, I unfortunately have bad knees and a bad back so after a couple of hours (or 3 or 4) of sitting at the desk working on Logic, I am seriously hurting. Not comfortable at all. At least owning a MacBook would give me the option to move around to some place more comfortable if I desire.
So...
Even though I recently bought a wonderful iMac that works great, I'm seriously considering getting a 1.83 MBP with at least 1GB of RAM and the 100GB/7200 RPM drive to accompany it just for the portability factor. Sure, I could get a used G4 PowerBook or iBook, but all I own is the Universal Binary of Logic Pro; I would have a hard time accepting the decrease in speed I've gotten use to on the Core Duo. Besides, I inherently have a problem buying something (even used) that I know is old and out of date when the latest and greatest is available.
So here is the $25,000 question: Am I nuts for even considering this? Am I placing too much of a premium on the portability as I would use it?
This could easily be justified if I was a working musician on the road, but that ain't me. And you can believe that I'm definately not rich and thus don't have money lying around.
But I have obsessed over this so much lately, I feel that I almost have to get it just to put my mind at ease! I even briefly considered putting the iMac on eBay and just buying a MBP to replace it, but I love the screen real estate I get with the 20" iMac and I question if I'll be truly satisfied with a 15.4" screen FULL TIME. 17" might be better, but I doubt if I can wait until June for them to arrive. In addition, everything would connected via my wireless LAN and .Mac so file sharing should not be an issue.
Help!!!
What would you do? Sell the iMac or just get a MBP as cheap as I can?
Opinions, Please!
20" iMac Core Duo, 2GHz, 2 GB RAM, 250 GB HD, 128MB VRAM Mac OS X (10.4.4)

I love the portability my powerbook gives me. You can use a PB in your setup. You can run an external monitor for either PB or MBP. You can node. Universal Binary menas it is an application which has the components written for both PPC and Intel chips-so you don't need to do conversion. Nodes won't require you buy a nother license. so the answer is down to how much the 2 upgrades and 1 crossgrades will set you back vs how much use you'll get out of them. IMO the iMac is inexpensive (I mean that in a good way-worth hooding on to). Maybe just look at a refurb PB unless you really have the extra cash.

Intel iMac 20' users - any problems with noise on your firewire interfaces?

Someone please tell me that they have a quiet intel iMac 20'/Firewire interface set up, I'm having problems with a lot of digital noise from my Saffire LE & badly am hoping it's 'fixable' or just a faulty unit but more so, praying it's not noise from the iMacs Power supply that will interfere with any firewire interface I get???
I've read many posts about G5's suffering from noisy psu's which was one factor in my choosing an intel iMac & I chose the Saffire on it's great reviews for sound quality, there's no way I can work with the noise I'm getting & I'm pretty much panicking that if it IS the iMac & firewire thats the problem I'll be screwed as i only have 6 pin firewire as a useable option (really don't want to use usb2)
Incidentally, the 'budget' set up I had previously (PC & soundblaster audigy) didnt suffer from any noise like this (at least not that was even audible with the mixer levels at conversational level!) which i guess rules out any blame of this on 'mains hum/interference'?
The noise is there with the saffire's monitor output knob at any setting & with no inputs connected, it;s even worse if i power the saffire with it's external psu instead of off buss power. I'm not using a firewire hub & I've tried switching firewire leads & removing the firewire hard drive i have in the other port in case this was affecting it.
Would really appreciate hearing from anyone with similar troubles or even better anyone thats NOT having this problem with a 20' intel iMac & firewire interface so at least i know there's light (& quiet!) at the end of the tunnel
Adam
Intel iMac 20' Mac OS X (10.4.7)

funnily enough I'm going the other way, I have a rack of external modules/>sampler/fx etc & a crate of looms I've just unplugged as they've not been >turned on in so long!!!
I hear you there!
The noise is there without any inputs at all to the interface, its defiantely >digital though, its like a toned version of the sound of an old telephone >modem.
What I mean, is try disconnecting everything, drives and all. You might even disconnect the interface and crank up the iMacs volume to see if it is there. If it is, you can try the UPS and see if that takes care of it. Then add them in one at a time. All it takes is one cheap power brick in the mix to cause all kinds of trouble (if your using powered monitors, that brick too). Noisy components can actually send noise back into the source power.
I know it can be really frustrating, especially if you have noise coming from more that one source. The key is to strip everything until it is quiet and then add them back in to see where the worst is. Then come up with a plan to try to get rid of the noise.

Performance issue with brand new intel iMac extreme

I am at a loss to explain a problem I've been having and I thought I might put it out to you guys.
In September I purchased a macbook Pro (2.4 ghz, 4 GB RAM) to use in video editing with Final Cut Pro, and for the most part I've been thrilled. I use 1TB LaCie external drives connected via FW800, and perform Multiclip editing with 4-5 video streams at a time and only on occasion have dropped frames during the editing process.
In December I determined that I needed to have an additional system, and thought a 2.8Ghz Intel iMac extreme would be an excellent choice, since for the same price I could get a little more power in the processor, more hard drive space and a bigger screen to work on. When we picked up the new system in the store (The Grove Apple Store in LA), we had them upgrade the memory to 4GB.
Since day one we have had performance issues, including problems playing streaming and DVD video, severe delays mounting and unmounting drives (firewire and USB) and application images, and freezing while doing even simple tasks like printing or checking email. These problems occur even while there are no external drives are connected. I have none of these issues with the Macbook Pro, which has virtually an identical set of programs installed, and both running the same version of Leopard.
I already took the original iMac back to the store, and they exchanged it, but did not have 4GB sets of RAM in stock so they took the RAM from the original machine and put it in the new one. They said if I continued to have problems then it was most likely the RAM and I should come back when they got more in stock. I DID have the same problems with the new machine, and took it back to the Apple Store and they swapped the memory. It seemed to improve the issue, but now I'm seeing the same severe performance issues again.
All tech support can do is tell me to do a PRAM reset, which seems to improve things very temporarily (but that may be my imagination) or have me restart, which at least has the ability to make the printing of documents capable.
What I'm wondering is if it is likely that the RAM is the issue and I just got another bad batch, or if the iMac has some weird glitch that isn't present in the macbook Pro...?? Or could I have possibly gotten 2 bad systems in a row? It's extremely frustrating, and I KNOW it shouldn't be this way! It's so bad I get better performance out of my single-core G5 tower! How do I get a good working system that operates like it should? Am I better off getting another Macbook Pro? I'd rather not for several reasons...
I have xbench on both the MBP and the iMac and can provide test numbers if they'll help, as well as any other info.
Thank you so much for reading my novella of a post and also for any insight you have!
Best,
Travis

Hi!
I got the same problem with my MacBook when it still was new in may 2006. It was supposed to be one of the faster Laptops around but it was soooo slow it drove me nuts. I can only advise to have a look if there is something hugging up your RAM and run some tests using these programs on your machine:
Xbench:
http://www.macupdate.com/info.php/id/10081
MenuMeters:
http://www.macupdate.com/info.php/id/10451
If they show any unusual results you might have your problem...
As to my problem with the MacBook: I did a complete re-install (writing the harddisk over with zeroes) and suddenly everything was just fine. (But be sure to back all your files before that, I learned this one the hard way.) I know it is just a standard answer, but it worked out for me this time...
Hope this helps in some ways.
Cheers,
Rene

Intel iMac with 10.5.8 - Grey Screen of Death but worse please help!

Okay, this has happened three times now in six months, and I'm about to go out of my mind. Everytime it's a little different but basically:
My iMac becomes unresponsive, whether by a system lock up, or I wake up in the morning (like this morning) to a black screen with the white light still on, as if it were asleep. Nothing I do wakes the computer or otherwise makes it respond, so I hold the power button down for a few seconds and it shuts off.
Now, when I boot up, I get a grey screen with the Apple logo with the spinning black/grey pinwheel.
Inserting a CD does nothing. In fact, now my only install CD of Leopard is stuck in the slot-loading drive. I've tried everything I can to eject it: hold down eject on boot, left mouse button on boot, option on boot, commandoption+pr, command+v, etc. etc. etc.
I'm a software developer for OS X and have extensive hardware knowledge, so I kind of know a bit about what I'm doing.
The iMac will not boot off of a CD. It doesn't even recognize the CD. I have an external USB 2.0 hard drive with a current Time Machine backup, but I don't think those are bootable.
Anyway, in the past, to resolve this issue, I've had to take the iMac apart, put the internal hard drive into an external enclosure, and mount the drive onto my MacBook Pro. Interestingly enough, when I do this the drive mounts perfectly fine and shows all files exactly as they should be. So it's something to do with Leopard destroying it's boot record, or some other system configuration.
Even worse, I cannot simply reinstall Mac OS X from the laptop, because the installer says the hard drive needs to be formatted before an install can occur. So either way I'm losing all my data (even though as I said I have a current backup).
Well this time I haven't taken it apart yet. But the install CD is stuck in the drive. Even if I got the hard drive out, and mounted on my MacBook, my other install CD is too damaged to use, so I MUST get this CD out of the iMac.
My questions are:
What do you do when the grey screen of death occurs, and the computer won't even boot off of the CD?
What do you do to get a CD stuck in an iMac out? Especially when the iMac is in the grey screen of death mode?
What in the world is causing this to happen EVERY 3-6 MONTHS??!
Someone please help... I'm going insane.

Hi I am having the identical problem with my 24" intel iMac 2007..... Did you ever figure out what the problem was? I'm on round 3 now and with a completely blank grey screen and it won't start up from the disk 1.. I also have diskwarrior and techtool pro as well as the osx leopard and snow leopard disk... The HD is new.. Replaced by apple 3 months ago.. Don't know the cause the first time this happened about 9 months ago.. 2nd time, 6 months ago it never rebooted from the office for mac 2008 critical update... Did a clean install after backing up to TC... Took it to apple replaced HD even though it appeared ok, they checked all hardware and I ran techtool pro daily ever since. Last week software update had several updates avail. Office for mac being one of them.. I updated and have never booted since.. . I swear to never ever use another Microsoft product as long as I live if I can just fix this once more... Help me please

New intel iMac with reduction on Microsoft Office 2004

Hi.
I am seriously considering buying a new iMac Intel Core Duo. If i order before the end of january along with Microsoft office, i can get upto 50% off office.
I know that the current version of office will run fine on the new iMac Intel Core Duo using 'Rosetta' and that they are developing a new version to be released in march that will run native on the intel imac.
Therefore, if i buy office with my iMac now, I will not have the native version and I will have to buy the new version again?
I am quite confused and really unsure what to do?
Would it be worth me buying office now?
Will i be able to upgrade to the new version for free?
.... I dont understand why apple are selling a version of office with the new iMacs if it is not even the proper software.
Please help me as I am unsure of what to do.
Thanks a lot in advance...

I'm not positive on this but I think I remember, during the keynote speech, the woman that was from the MSBU saying the updates would be available for download at no charge. Might be worth looking at that part of the keynote to be sure. I don't remember the date she said they would be available though.
Eric
Mini 1.25, 512MB RAM, 80GB HD Mac OS X (10.4.4) G4 DA 533MHz DP w/Giga dual 1.8GHz upgrade, 1.25GB RAM, Radeon 9600 Pro
I was wrong. I just watched that part of the keynote again and there will be updates available for download for free but not the universal binaries. My bad.
Message was edited by: Eric S.

Can you put the small DVD discs from a camcorder in the DVD slot of the iMac?

Stupid question...can you put the small DVDs from a camcorder in the DVD slot of the iMac?

That could be a challenge. If I am not mistaken that camera strictly records to DVD - RW and has no digital output connectors, is that right?
My only experience with a camera like that was a bad one. I was able to get the video off the disc using a tray-loading iMac but it was painfully slow.
iMovie (for example) is designed to work with camcorders such as those specified in this reference:
http://help.apple.com/imovie/cameras/en/index.html
I cannot find the DCR-DVD92 in that database
You might consider finding an external USB slot-loading DVD drive, but as I say my experience was painfully slow, and you might run into file format compatibility challenges.
I am sure it's possible but it won't be as easy as importing video from something like an iPad or iPhone. I still use a camcorder on occasion but it has a FireWire port. That's easy.

Advice asked for purchasing an intel iMac

Hello, everybody,
after 4.5 years i'm up to my next iMac, and have a question for advice: with my last iMac (G5, 1.8 GHz) i had a troubled relationship: after 18 months, it started to behave badly, and had two logic board exchanges within a very short time. Thanks to Apple, they were made under a LB replacement programme, so no cost for me (well, the replacement needed for several weeks when my iMac was in "hospital" was at my charge...) Now, the PSU shows signs of weakness... for my taste too early.
I know many others had problems with this model (and with the PSU), after all, Apple launched a fairly vast replacement programme.
My question: how is the Intel iMac? Is it similar to the old G5, or is it more reliable? i love the design of the iMac, the quality of its screen, and the system altogether - but would like to avoid a similar experience.
Any comment would be greatly appreciated.
thomas

Hi, Kenichi,
thanks for your comment. I installed everything of my old iMac on the new one i got yesterday night, and it seems to be a still nicer machine. Also the old G5 machine was nice, but had these stupid logic board problems, which caused me some severe problems 2 years ago. but since the LB got replaced (twice) by Apple under their exchange programme, not the normal warranty, it was running again very nicely. I hope that this intel machine is doing it the same way, and without need for changing hardware...
I thought the G5 was a slim machine, but the new one is even slimmer... Great!
Thanks again for responding.
Thomas

2 cd's stuck in intel iMac.. !!!!!!!!!!!!!!!!!!!!!!

Thats what my friend in Australia said to me (I am in New Zealand so 4 hours on a plane away! so cant go look)
Itunes was copying a cd and was about to burn it evidently and asked her to insert a blank disk so she stuck it gently in the slot and it sucked it in!!! now she thinks there are 2 cd disks in there ! there are 2 CD images on the desktop 1 for the music cd and 1 for the blank disk
This is what she recons happened though I cannot see how anyone could even with a great deal of force put 2 cd's in a slot drive at once !! and she used no force the drive grabbed it and sucked it in but now there seems no way to eject it/them
I am assuming there is one disk in there and suggested the eject button and dragging and reboot hold mouse idea and none of that works . The drive makes a few noises but nothing comes out
So whats the story with intel iMacs.. is there no physical way like paper clips or others to eject it/.. I also heard you could boot to open firmware and type in something to eject it that way but it doesnt seem to respond to the commands to start in open firmware.. maybe intel Imacs dont have open firmware ?
is there some command line way at boot up to do this ?
or some other way ?
Yes she is blonde but i cant believe this is her fault..

Yes thanks
it was only 1 cd
I thoguht she may have been confused with the 2 icons
evidently it was a Karaoke CD and it comes up as 2 disks
1 audio content
1 video content
I am glad no one can force 2 cd's in their iMac
thanks a bunch she was killer herself laughing

Intel iMac + USB Printer

Hi,
My HP Deskjet 845c Printer no longer works with my new intel iMac.
(previously it did work with Powerbook G4 1.67, also running 10.4.6)
I checked the Apple support document :
http://docs.info.apple.com/article.html?artnum=303057
for printers supported with intel macs & this printer IS listed as supported.
I've also followed the steps described, including reseting the print manager.
I AM able to print a test page, using the HP Driver utility via Printer Setup Utility.
This works fine.
However, if I attempt to print anything else (textedit, photoshop, preview) i get a badly garbled printout, letters large or streched & broken up onto several pages.
I'm confused why the test page works fine from Printer Setup, but anything else is junk - Any ideas?

Download Guten Print
http://www.versiontracker.com/dyn/moreinfo/macosx/15970
it has the lastest drivers for the HP printers, yours included. I hope it'll work.
Antonio

SLOT 1 on Intel iMac is bad?

Similar Messages

Maybe you are looking for