Slow 3g problem identified?

     Moto Droid here.  My 3g isn't horrible, but it has always been somewhat slower than what is typical.  I was taking to somebody who is actually a consultant for Sprint yesterday and was quite knowledable about phones (I promise Verizon, I am not cheating) and he looked through my settings and noticed that my PRL version, which is '40066' is out of date, and should read 40068.'  Apparently this has to do with updating the location of Verizon/Sprints towers, which they share often since they share the same 3g technology.
     My question is if he is correct that it should be 40068, how can I go about getting it updated?  I've done *228 a few times throughout the months, but it never helps even a little.. Aside from that though there really isn't a problem..but does anybody else's PRL number differ from mine?   I appreciate any feedback anybody has.  Thanks.

Ok. I think I can answer this, but first ill answer. rkeesler
The PRL is basically a list of numbers that tells your phone which tower is the best to use to reduce call roaming. So, if the PRL finds a tower that your phone doesn't see, you'll get roaming. The higher the PRL the better, because towers that are listed are the towers the better provide the 3G service, because they are Verizon Towers. Now that we know what they are, lets talk about updating them. It's really quite simple, you have to go somewhere else. You've got to get in the range of a new tower. If you know you're number is low, it's because your area only has so many towers. You can't read something if it's too far away. So simply get closer. Which isn't always that simple I guess... But that's about all there is to it. 

Similar Messages

  • Fixing my slow sleep problem

    I have been having problems with my MacBook taking a fairly long time before going to sleep. In attempting to fix the problem I have tried repairing permissions, resetting PRAM, Safe Boot mode, cleaning the system with MacJanitor, etc. In some cases the system seem to work better, but eventually the slow sleep problem reappeared.
    I did further searching and found references to checking what the system was doing before going to sleep using the System Console. I tried this and found a variety of error messages being logged that didn't seem normal. With further investigation I found a number of problems related to remnants of old programs still affecting my system when they should have been removed some time ago.
    I started to track down and remove items manually such as no longer used prefpanes. I found items in the Launch Agents and Launch Daemons directories that shouldn't have been there. I even found an old kernel extension (SideTrack.kext) that was somehow transferred from my old Powerbook to my new MacBook. There were also .plist items hanging around that weren't needed - so I removed them too.
    After using the Console to identify problems in my system and then track down and remove all the old program remnants, my MacBook seems to be its old self again. It goes to sleep very quickly and the overall performance of the system seems improved. So, if you're having sleep issues or other problems I'd suggest having a look at the System Console to help identify the problems.

    The sleep time before the fix was in the 20-30 sec. range. The sleep time after getting things fixed is about 1-2 sec. or so.

  • Weird Slow Connectivity Problem

    Hi guys
    We are facing a slow connection problem and we cant seem to find an answer
    as to whats happening.
    Our application has
    1. An app server hosting EJBs , datasources etc
    2. A webserver on different box hosting servlets and command classes.
    3.A Sql server 7 database on a different box.
    All these boxes are on a secured network ; which means that access to them
    is given on a requirement basis.
    We have JSPs on the web box which get a datasource connection from the app
    box to run queries against the database server.Our problem is that even to
    run a very simple query ; it takes a long long time (in order of minutes)
    and the same query runs lightening fast in the test environment where all
    the boxes are on the same network.
    We use type 4 SQL driver.We initially thought that this could be a network
    problem as it doesnt make sense that the same query runs very fast on the
    test boxes.But the network settings seem ok.
    The network settings are this way :
    Appserver box has access to database server box.
    Webserver box has access to Appserver box.
    So you can see that webserver doesnt have direct access to database
    server.Is it needed to run queries ; since I am taking a connection from the
    appserver.How does the whole business of running queries work when I take a
    connection from a datasource on an app server.
    I had this question posted to the BEA weblogic customer support ; but they
    really couldnt help me.
    Any ideas would be appreciated.
    Thanks
    Pankaj Vij

    This has many possible troubleshooting paths. You don't mention if this is a workgroup or domain based Windows network. Checking the "Directory Access" settings as appropriate may yield the solution.
    If this is a domain/active directory network the issue may lay with the machine account on the domain server.
    Create a new user account on the Mac and see if the problem follows when you log in to that account and try to access the SMB share.
    If the problem goes away, then you should look at the original user's startup items to see what might be launching at startup or simply move all files to the new user and delete the old account (not the preferred method).
    If the problem persists with a second user on the same machine, then I'd take another Mac, boot it to target disk mode (laptop is good for this), using a firewire cable, boot the troublesome mac to the target mac and try to replicate the issue.
    If issue persists, this is a network permissions issue on the server, if it goes away it is a local software issue on the Mac and a clean install of the OS may be needed if you can't locate the meddlesome settings/software.

  • My 15" macbook pro have big problems identifying and connecting to my wireless network

    my 15" macbook pro have big problems identifying and connecting to my wireless network. I have no problem connecting to my neighbour´s. Also I have a 13" macbook pro, a 13" macbook, 2 ipads and 3 iphones (3, 4 and 5) and none of these have any problems connecting to my wireless. My 15" is running Mac OS X 10.7.5, has a 2.66 GHz Intel Core I7 proc and 8 GB Ram

    Hi Frodey,
    Thanks for using Apple Support Communities.  This article has steps to take to troubleshoot connecting to a wireless network and may help:
    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    http://support.apple.com/kb/HT4628
    Cheers,
    - Ari

  • Slow component problem (logon page, login - logout)

    Hi All,
    since some time i'm experiencing a "slow component" problem with EP.
    As a sympthom portal is slow during first logon page and during login - logout.
    Jarm trace report the situation below:
    Component Name     Avg Gross Time (ms)     Total Gross Time (ms)     Max Gross Time (ms)
    UME:SAPJ2EEAuthenticator:getLoggedInUser     90,045     450,226     n/a
    AppServer:Security:Authentication:LOGIN:com.sap.security.core.server.jaas.SPNegoLoginModule     90,023     450,116     n/a
    AppServer:Security:Authentication:FastLoginContext:login     90,022     900,229     n/a
    AppServer:Security:Authentication:LOGIN:com.sun.security.auth.module.Krb5LoginModule     90,006     450,031     n/a
    (90 seconds to load login page!!)
    Seems to be an UME problem, but logs are OK and the configuration is the same of other systems that work fine.
    Anyone has any idea ?
    Thanks guru !
    Lorenzo

    Hi,
    I am dealing with exactly the same problem. I hope you should have fixed this problem by now. Please help me fix mine.
    Many thanks in advance.
    Regards,
    Pawan.

  • Slow internet problem on my iMac solved by installing Google Chrome browser

    Slow internet problem on my iMac solved by installing Google Chrome. My daughter came with her macbook pro loaded with OSX 10.6.8 but running Chrome and she could open all my problem websites instantly. So fault was in Safari. Thanks for all your help.  My original post has disappeared

    Original post is at:
    All of my pre 2012 macs extremely slow to load web pages but my son's 2014 mac and my iphone and ipad 2 load same sites instantly

  • Mac 27 inch slowing down problem

    We have a mac and here lately we have experienced when trying to open a program it takes way too long to open it and even to start up, is there a way to fix this?

    Problem description:
    Opening programs take a long time, slow performance
    EtreCheck version: 2.0.11 (98)
    Report generated November 11, 2014 at 8:52:37 AM CST
    Hardware Information: ℹ️
      iMac (27-inch, Mid 2011) (Verified)
      iMac - model: iMac12,2
      1 2.7 GHz Intel Core i5 CPU: 4-core
      4 GB RAM Upgradeable
      BANK 0/DIMM0
      2 GB DDR3 1333 MHz ok
      BANK 1/DIMM0
      2 GB DDR3 1333 MHz ok
      BANK 0/DIMM1
      empty empty empty empty
      BANK 1/DIMM1
      empty empty empty empty
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      AMD Radeon HD 6770M - VRAM: 512 MB
      iMac 2560 x 1440
    System Software: ℹ️
      OS X 10.9.5 (13F34) - Uptime: one day 18:50:8
    Disk Information: ℹ️
      WDC WD1001FALS-403AA0 disk0 : (1 TB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      Macintosh HD (disk0s2) /  [Startup]: 999.35 GB (853.00 GB free)
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      HL-DT-STDVDRW  GA32N 
    USB Information: ℹ️
      Logitech USB Receiver
      Apple Internal Memory Card Reader
      Apple Computer, Inc. IR Receiver
      Apple Inc. FaceTime HD Camera (Built-in)
      Plantronics Voyager Legend
      Apple Inc. BRCM2046 Hub
      Apple Inc. Bluetooth USB Host Controller
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /Library/Application Support/Roxio
      [not loaded] com.roxio.TDIXController (2.0) Support
      /System/Library/Extensions
      [not loaded] com.devguru.driver.SamsungComposite (1.4.12 - SDK 10.6) Support
      [not loaded] com.roxio.BluRaySupport (1.1.6) Support
      /System/Library/Extensions/ssuddrv.kext/Contents/PlugIns
      [not loaded] com.devguru.driver.SamsungACMControl (1.4.12 - SDK 10.6) Support
      [not loaded] com.devguru.driver.SamsungACMData (1.4.12 - SDK 10.6) Support
      [not loaded] com.devguru.driver.SamsungMTP (1.4.12 - SDK 10.5) Support
      [not loaded] com.devguru.driver.SamsungSerial (1.4.12 - SDK 10.6) Support
    Startup Items: ℹ️
      HP Trap Monitor: Path: /Library/StartupItems/HP Trap Monitor
      ProTec6b: Path: /Library/StartupItems/ProTec6b
      Startup items are obsolete and will not work in future versions of OS X
    Launch Agents: ℹ️
      [not loaded] com.adobe.AAM.Updater-1.0.plist Support
      [failed] com.epson.Epson_Low_Ink_Reminder.launcher.plist Support
      [loaded] com.epson.esua.launcher.plist Support
      [running] com.epson.eventmanager.agent.plist Support
      [running] com.genieoinnovation.macextension.plist Support
      [not loaded] com.hp.help.tocgenerator.plist Support
      [running] com.rosettastone.rosettastonedaemon.plist Support
      [running] net.culater.SIMBL.Agent.plist Support
      [loaded] org.macosforge.xquartz.startx.plist Support
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist Support
      [invalid?] com.adobe.SwitchBoard.plist Support
      [loaded] com.genieoinnovation.macextension.client.plist Support
      [running] com.iobit.AMCDaemon.plist Support
      [loaded] com.macpaw.CleanMyMac2.Agent.plist Support
      [loaded] com.microsoft.office.licensing.helper.plist Support
      [loaded] net.sourceforge.MonolingualHelper.plist Support
      [loaded] org.macosforge.xquartz.privileged_startx.plist Support
    User Launch Agents: ℹ️
      [loaded] com.adobe.AAM.Updater-1.0.plist Support
      [loaded] com.adobe.ARM.[...].plist Support
      [loaded] com.facebook.videochat.[redacted].plist Support
      [loaded] com.genieo.completer.download.plist Support
      [loaded] com.genieo.completer.ltvbit.plist Support
      [running] com.genieo.completer.update.plist Support
      [loaded] com.google.keystone.agent.plist Support
      [loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist Support
      [loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
      [loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
      [loaded] com.mediafire.express.plist Support
      [not loaded] com.user.UninstallAD.plist Support
    User Login Items: ℹ️
      Dropbox Application (/Applications/Dropbox.app)
    Internet Plug-ins: ℹ️
      QuickTime Plugin: Version: 7.7.3
      AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
      AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
      Default Browser: Version: 537 - SDK 10.9
      SharePointBrowserPlugin: Version: 14.4.5 - SDK 10.6 Support
      Google Earth Web Plug-in: Version: 7.1 Support
      JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
    User Internet Plug-ins: ℹ️
      CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 Support
    Safari Extensions: ℹ️
      AddThis
      AllMyTube
      Video Converter
    3rd Party Preference Panes: ℹ️
      Flash Player  Support
      Tuxera NTFS  Support
    Time Machine: ℹ️
      Skip System Files: NO
      Auto backup: YES
      Destinations:
      Time Machine Backups [Local]
      Total size: 319.73 GB
      Total number of backups: 0
      Oldest backup: -
      Last backup: -
      Size of backup disk: Excellent
      Backup size 319.73 GB > (Disk size 0 B X 3)
    Top Processes by CPU: ℹ️
          5% Adobe Photoshop CS6
          3% WindowServer
          3% fontd
          2% Dock
          0% Google Chrome
    Top Processes by Memory: ℹ️
      1.28 GB Adobe Photoshop CS6
      262 MB Finder
      103 MB Google Chrome Helper
      103 MB Google Chrome
      82 MB Mail
    Virtual Memory Information: ℹ️
      42 MB Free RAM
      1.36 GB Active RAM
      1.33 GB Inactive RAM
      924 MB Wired RAM
      61.17 GB Page-ins
      63 MB Page-outs

  • Slow Shutdown Problem

    Recently, my iMac is experiencing unusually slow shutdown times.
    Typical shutdown times were about 10 - 15 seconds.
    Shutdown is now taking about 35 - 45 seconds, and occasionally, shutdown completely fails to occur.
    This appears to have started with the update to OS X 10.10.3.
    I have included a recent EtreCheck Report.
    Problem description:
    Slow Shutdown
    EtreCheck version: 2.2 (132)
    Report generated 4/23/15, 7:57 AM
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        iMac (21.5-inch, Mid 2011) (Technical Specifications)
        iMac - model: iMac12,1
        1 2.5 GHz Intel Core i5 CPU: 4-core
        16 GB RAM Upgradeable
            BANK 0/DIMM0
                4 GB DDR3 1333 MHz ok
            BANK 1/DIMM0
                4 GB DDR3 1333 MHz ok
            BANK 0/DIMM1
                4 GB DDR3 1333 MHz ok
            BANK 1/DIMM1
                4 GB DDR3 1333 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
        AMD Radeon HD 6750M - VRAM: 512 MB
            iMac 1920 x 1080
    System Software: ℹ️
        OS X 10.10.3 (14D136) - Time since boot: 0:1:54
    Disk Information: ℹ️
        ST3500418AS disk0 : (500.11 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
            Ken's HD (disk2) / : 498.88 GB (437.32 GB free)
                Encrypted AES-XTS Unlocked
                Core Storage: disk0s2 499.25 GB Online
        OPTIARC DVD RW AD-5690H 
    USB Information: ℹ️
        HP ENVY 110 series
        Griffin Technology, Inc. PowerWave Composite
        Apple Inc. BRCM2046 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Inc. FaceTime HD Camera (Built-in)
        Apple, Inc. Keyboard Hub
            Apple Inc. Apple Keyboard
        Apple Computer, Inc. IR Receiver
        Apple Internal Memory Card Reader
    Firewire Information: ℹ️
        G-TECH OEM ATA Device 00 800mbit - 800mbit max
            EFI (disk1s1) <not mounted> : 210 MB
            Boot OS X (disk1s3) <not mounted> : 134 MB
            Boot OS X (disk1s5) <not mounted> : 134 MB
            KLBackup (disk3) /Volumes/KLBackup : 150.19 GB (88.76 GB free)
                Encrypted AES-XTS Unlocked
                Core Storage: disk1s2 150.55 GB Online
            TimeMachineBackup (disk4) /Volumes/TimeMachineBackup : 348.75 GB (234.71 GB free)
                Encrypted AES-XTS Unlocked
                Core Storage: disk1s4 349.08 GB Online
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [loaded]    com.google.keystone.daemon.plist [Click for support]
        [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    com.adobe.ARM.[...].plist [Click for support]
        [loaded]    com.shirtpocket.backupbytime.plist [Click for support]
    User Login Items: ℹ️
        AirPort Base Station Agent    Application  (/System/Library/CoreServices/AirPort Base Station Agent.app)
        Calendar    Application  (/Applications/Calendar.app)
    Internet Plug-ins: ℹ️
        FlashPlayer-10.6: Version: 17.0.0.169 - SDK 10.6 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
        AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
        Flash Player: Version: 17.0.0.169 - SDK 10.6 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        SharePointBrowserPlugin: Version: 14.4.9 - SDK 10.6 [Click for support]
        Silverlight: Version: 5.1.20913.0 - SDK 10.6 [Click for support]
        DirectorShockwave: Version: 12.0.2r122 - SDK 10.6 [Click for support]
    Safari Extensions: ℹ️
        1-ClickWeather
        AdBlock
    3rd Party Preference Panes: ℹ️
        Flash Player  [Click for support]
    Time Machine: ℹ️
        Skip System Files: NO
        Mobile backups: OFF
        Auto backup: YES
        Volumes being backed up:
            Ken's HD: Disk size: 498.88 GB Disk used: 61.55 GB
        Destinations:
            TimeMachineBackup [Local]
            Total size: 348.75 GB
            Total number of backups: 65
            Oldest backup: 2014-08-18 16:35:10 +0000
            Last backup: 2015-04-23 10:45:16 +0000
            Size of backup disk: Adequate
                Backup size 348.75 GB > (Disk used 61.55 GB X 3)
    Top Processes by CPU: ℹ️
             2%    WindowServer
             2%    fontd
             0%    HP Scanner 3
             0%    taskgated
             0%    dpd
    Top Processes by Memory: ℹ️
        872 MB    kernel_task
        115 MB    mds_stores
        98 MB    mdworker(7)
        82 MB    opendirectoryd
        82 MB    loginwindow
    Virtual Memory Information: ℹ️
        13.00 GB    Free RAM
        3.08 GB    Used RAM
        0 B    Swap Used
    Diagnostics Information: ℹ️
        Apr 23, 2015, 07:54:16 AM    Self test - passed
        Apr 23, 2015, 04:53:26 AM    /Library/Logs/DiagnosticReports/firefox_2015-04-23-045326_[redacted].cpu_resour ce.diag [Click for details]
        Apr 23, 2015, 03:29:53 AM    /Library/Logs/DiagnosticReports/Disk Utility_2015-04-23-032953_[redacted].cpu_resource.diag [Click for details]
        Apr 22, 2015, 07:59:05 AM    /Library/Logs/DiagnosticReports/firefox_2015-04-22-075905_[redacted].cpu_resour ce.diag [Click for details]

    Okey, want some more suggestions?
    Check Device Manager when in Safe Mode. Any foul marks?
    PCI devices in non-optimal slots: Place them in other.
    Can you see what processes are running when shut down is in progress? (Does Ctrl+Alt+Del work with XP?)
    You could also make it a Windows question:
    When you order Windows to shut itself, it sends signals to all processes and gives them time to close down themselves, and if they don't do it in stipulated time Windows finishes them off. There is a Registry setting for the amount of time given by Windows, but I can't remember it now. But you can find it on the Internet I'm sure. Don't be too tight with the time though!
    From your description one could guess, that something tries to prohibit shut down, or that a process can't find the driver to turn itself off.

  • Hi, I recently came back from 3 months of not using my imac and found it to be exceedingly slow (a problem i have never had before (eg i cant get through playing a song on itunes without it pausing over 10 times for intervals of ~5 seconds.

    Please read subject first then continue with this text:
    Then I tried to connect my IPAD and IPHONE and neither would update because it couldnt find the file or something and then i couldnt even restore.
    The next day itunes was gone completely: "The iTunes application could not be opened. An unknown error occurred (13014)"
    dAnd then the next day ie today there is NO DOCK, NO BACKGROUND and NO DESKTOP ICONS! I had to open safari from the top bar that was only there because I have one random application called Garmin ANT that remained open (i never use this application, its a running computer watch thing)
    Thank you so much for any help you can provide
    PS Do i have a virus?
    I didnt think macs could get viruses?
    How do i back up my computer if i cant open finder?
    Thanks again
    PPS my computer is updated as far as i can tell and achieve.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem(s)?
    After testing, reboot as usual (i.e., not in safe mode.)

  • Slow system – problem with OS, software, memory, hard drive?

    I am running a MacBookPro5,3 (Intel Core 2 Duo – 2.8 GHz, Memory = 2 x 4 GB, Hard drive = NVidia 500 GB - 100GB of which is free space), using Mac OS X 10.6.3.
    I was running 10.6.6. Then attempted a software update to 10.6.7 and the system essentially stopped working, Was able to back up data using target disk mode, and then reinstalled 10.6.3 using a purchased snow leopard DVD (had lost the disk that came with the computer). Worked for a while but have been having issues with increasingly long and frequent system slow downs (spinning beach ball). Recently attempted another system update, and the update failed and wasn't able to do anything. Used the 10.6.3 dvd and did a disk utility check – it initially said there was a problem with the hard drive – but on another restart from the DVD this issue disappeared (but still no working OS). Attempted connection of my computer to another laptop using target disk mode – this failed to show the target hard drive and only showed the dvd which was in the computer booted up in target disk mode.
    At this point rebooted using the DVD and was able again to install system 10.6.3. However, there are still occasions of sporadic slow-downs associated with specific applications (spinning beach ball for anywhere from 5 – 120 sec). Ran disk utility from the DVD again – states that the permissions and the hard drive is OK. Also, ran a memory test (using Rember) which stated that everything was fine (although the test took nearly 2 hours to run and was punctuated by much spinning beach ball activity).
    At this stage i am not sure whether I have a problem with memory, the hard drive, the OS or the software. Clearly something is not right – are there any other options to test my system (since I don't have the original dvd – I haven't been able to run a system hardware test) - other third party options?
    Thanks in advance for any advice, and apologies for long post.
    Rob

    Sounds like a failing hard drive or SATA controller. It's not clear whether you have a backup of your data. If not, you should remove the hard drive from the machine and install it an external enclosure or dock, then back it up using another Mac. Then take the unit to an authorized service outlet for testing.

  • Slow Browsing/Problem connecting to games

    Hi,
    About two weeks ago I started to have a problem with my internet, webpages were slow to load, some not loading at all, and a number of games were suffering from disconnects. Upon contacting BT technical support they found a problem with our Home Hub 3.0 so sent us a new one.
    However after setting up the new hub, i'm still having the exact same problems. The slow browsing is on both my PC which is connected by ethernet, and my laptop which is wireless. Despite this during peak and off-peak times, BT's speedtest is telling me that my PC has 75mb download speed and 16MB upload speeds.

    Have you tried changing the DNS setting to google DNS on your devices
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

  • YOSEMITE SLOW, GRAPHIC PROBLEM & MORE..

    I have problem with everything in my mac. Safari is slow and lags. I need to w8 much time to open my apps like; iTunes, Steam, App store, finder and more. I have graphic problems, fps prob, yosemite need a lot of CPU and memory. Someone has the same problem? Need 7-10 min to turn on my mac. Will be resolved with an update? Sorry for my bad english, I'm italian.

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.FolderActions.folders com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper ' ' 879294308 461455494 3627668074 1083382502 1274181950 1855907737 464843899 3694147963 1417519526 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 3301885676 891055588 998894468 695903914 1443423563 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */   /;' ' s/^.+ |\(.+\)$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e sysctl\ -n pluginkit );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|Roame|SMC:|suhel| VALI|ver-r|xpma' -o -o -k Sender fseventsd -k Message Req SL -o -k Sender Req launchd -k Message Req de: " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 38 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 39 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return  three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
    12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • Slow Wireless Problem

    After I updated OSX 10.6, my internet becomes extremely slow. Since it is too slow, I cannot open any web page. However, my other computer, which is using window, has good internet speed. Also, my ipod has no problem.
    When I go to near my router, my Mac works very well. However, the internet speed becomes very slow when I am using my mac far from the router about 10m. In this distance, other things(other labtop and ipod) work well.
    Does anyone know how to solve this problem? Before I update my OSX, I NEVER had this problem. Currently, I'm using OSX 10.6.2 in my Macbook.
    Thanks

    A few things to try..
    Run repair permissions from Disk Utility.
    I've experienced "conversion" problems going from 10.5 to 10.6. Go to the System Preferences, then Network Preferences window, and delete the connection by pressing the "-" button, then add the service by pressing the "+" button. Reboot and try again.

  • Slow Motion Problems

    I've been using FCP now for many projects, and this is the first time I have had this problem. I will use slow motion on a clip and render it. But when I play the clip back, it will skip ahead in the clip, and then freeze. For example, people walking down the street. The clip is 3 seconds and I slow it to 6 seconds. As people are walking, about every 5 frames the picture jumps. Then at 4 seconds into the clip it freezes and plays that frame for the remaining 2 seconds. I never had this problem before, and I'm at a loss as to what is wrong. Does anyone have any ideas? I'm almost at the point where I want to just reinstall the whole FCS!

    It depends on the formats you import. Are you slowing your footage down -100%? make sure you have constant speed checked. Maybe your time remapping it.

  • Slow typing problem

    I am having a problem where the type on the screen in Pages 2 can't keep up with my typing speed. I only type about 40-40 words per minutes. This was not a problem in Pages 1. Help...

    Hello Appraiser,
    there are a lot of posts about this issue in this forum. To maximize the respond of Pages is to:
    1) Hide the thumbnail view with the menu: "View/Show(Hide) Thumbnails".
    2) If there are a lot of images, shapes or tables, use the wrap option "follow contour" and not "rectangle" in the bottom section of the wrap inspector.
    3) If there are a lot of images, shapes or tables with the fix positioned oprion set, Pages has to recalculate a lot the text positiones, because there is heavy text flow in long sections. Try to avoid that.
    Do a search for "slow typing", there are more advices and suggestions.
    Frank.

Maybe you are looking for

  • Computer crashing after system update to 10.6.4

    Hi. I'm on a macbook pro. Everything was wonderful until the update. Now I'm crashing seemingly randomly. in Mail in safari at start up --- never getting past the apple I just hold the powerbutton to crash it...restart. It works for a while and then

  • Movieclip button in movieclip?

    i have put the attached code in a frame, that's in a movieclip. gotei13_thumbnail is a movieclip, that's in the same movieclip as the script. why does this not work? if i copy the script to a frame on the main timeline, and copy gotei13_thumbnail to

  • Multi-Value Parameters to Oracle Stored Procedures via SQL Commands

    Hi, When you used stored procedure in CR, you need to declare REF CURSOR, This type of cursor is a dynamic cursor not a static cursor. Hence, you are able to manipulate dataset in this type of cursor. Regards, Titanium0203

  • IPhoto 11: Will not allow me to select photos for upload

    Hello my knowledgeable compadres. I have installed iLife 11 and am running Snow Leopard 10.6.6 on a MacBookPro. I have had no problems with iPhoto 09 but since I've upgraded to the latest version, I am unable to select photos to upload to email, face

  • Download problem from App Store.

    A local network problem interupted the download of Mountain Lion from App Store. The network is now fixed but I can not restart the download. When I try to buy again at tells me I already have purchased it and ask me to click OK to start down load. B