Slow after windows 8.1 update

I have recently done the windows 8.1 update on my laptop and now for some reason when ever i boot the laptop up it takes forever to load. before the update the laptop booted in about 17s but after it takes more like 30s. i tried solving this problem myself but haven’t had much luck. what i have found that if i uninstall or disable my Intel HD graphics 4000 card it seems to solve the problem but i need my graphics card on the play some games etc. so my thought is it must be a hardware problem or a driver problem.
Can anyone help??

Hello MooreMoose, welcome to the HP forums.
It appears that your notebook is slow too start up after an update. I will try to help you with this.
Start by doing a clean boot. This will have you disable start-up items and services that aren't essential to have running when the computer first starts.
This could also help in determining if an application is behind the slowness. If the behavior continues, then it would be something updated or the OS. If this is the case, please start by doing a system restore. I recommend doing a restore from safe mode, to ensure it goes through correctly.
I will leave you to start with this, please let me know how everything goes.
Thank you for posting on the HP forums.
I worked on behalf of HP.

Similar Messages

  • Cardbus slot (And therefore firewire and SD card??) performanc​e very slow after Windows 8.1 update.

    Hi All,
    Just updated to Windows 8.1 64 bit from Windows 8. The Cardbus slot speed/bandwidth has dropped considerably to the point that it is now unusable since the update. It worked fine before, although I had a similar problem in the past which was cured by a BIOS update. Since the RICOH chip that controls this slot also control the Firewire and the SD Slot, I was wondering whether these are also affected?
    Does anyone else have the same issue? I expect it affects all computer with this chip: T61/X61/R61 etc etc.
    Would someone who is on Windows 7 64 bit or Windows 8.0 64 bit mind sending me the pci.sys and pcmcia.sys files so that I can try rolling the drivers back to a previous version?
    System details:
    Thinkpad X61 Tablet
    Core 2 Duo 1.6
    8GB RAM
    128GB SSD
    Windows 8.1
    Many thanks.
    Shaun

    Hi @PriyanshuJ ,
    I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publically post ( serial numbers and case details).
    If you are unfamiliar with how the Forum's private message capability works, you can learn about that here.
    Regards,
    George
    I work for HP

  • Ipod touch 5th gen will not sync after windows 8.1 update

    ipod touch 5th gen will not sync after windows 8.1 update. Computer see's Itouch as mass storage and charges. Worked with Window's 8 fine, as soon as update was done and restarted computer Itouch doesn't show up. Itouch seen on two other computers.

    See:
    iOS: Device not recognized in iTunes for Windows
    I would start with
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    Run this to help if it identifies the cause
    iTunes for Windows: Device Sync Tests
    Have you tried on another computer to help determine if you have a computer or iPod problem?

  • My mbp (mid 2010) is running extremely slow after installing some mavericks updates on May 22nd.

    My mbp (mid 2010) is running extremely slow after installing some mavericks updates on May 22nd. Earlier I thought this behavior is due to spotlight indexing but it finished after 3 days. I deleted all caches from library. But no luck, still running extremely slow. I checked activity monitor for cpu usage, it shows above 90% is idle. The memory usage always shows PM - 4 GB, Memory Used 3.96 GB, VM - 4 GB, Swaped used 0 bytes, App Memory 1.82 GB, File Cache 1.44 GB, Wired Memory 480 MB.
    Thanks in adavnce for help.

    Was it the combo updater that was installed or the OS X 10.9.3 update. There is a difference.
    MORE INFO ON WHY RUNNING COMBO FIXES ISSUES
    Apple updates available from the Software Update application are incremental updates. Delta updates are also incremental updates and are available from Apple Downloads (software updates are generally smaller than delta updates). The Combo updates contain all incremental updates and will update files that could have become corrupted.
    Combo updaters will install on the same version as they're applying--no need to roll back or do a clean install. So if you think you've got a borked 10.8.4 install from a regular update, just run the 10.8.4 Combo Updater on that system.
    "Delta" updaters can only take you from one version to the next. For example: 10.9.1 to 10.9.2. If somehow the 10.9.2 is missing something it should have, and that something isn't changed between 10.9.1 and 10.9.2 it will still be stale after the delta update.

  • I'm using iPhone 4S and it was working fast once I purchased and after few months I update my phone since to 7.0.1 since then neither my wifi is working nor my Bluetooth and even my phone is working slow, after than many new updates came I did but nothing

    I'm using iPhone 4S and it was working fast once I purchased and after few months I update my phone since to 7.0.1 since then neither my wifi is working nor my Bluetooth and even my phone is working slow, after than many new updates came I did but nothing works. Kindly help me out how to solve this problem.

    Hi Sameer alamgir!
    Here are two articles that can help you troubleshoot these issues with your Wi-Fi and Bluetooth connections:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    iOS: Troubleshooting Bluetooth connections
    http://support.apple.com/kb/TS4562
    Take care, and thanks for visiting the Apple Support Communities.
    -Braden

  • Cannot Adjust Screen Brightness after Windows 8.1 Update

    Cannot Adjust Screen Brightness after Windows 8.1 Update....i am using sony vaio laptop....i recently updated windows 8 to 8.1

    Hi:
    Most likely you need to install the graphics driver for W8.1 from your PC's support and driver page.

  • IPhoto slideshow is very very very slow after the latest software update

    As the subject states, iPhoto slideshows are very slow: after clicking on the slideshow-button first nothing happens, after a while the screen goes black (that lasts about a minute or so) and the (finally) the slideshow starts. which is very annoying because it displays no options screen at first as it used to do, it just starts using very annoying standard music... quitting slideshow again to go to the options menu takes ages!! this problem started after the latest software update... way to go Apple...
    suggestions anyone?!

    EelcoR
    Welcome to the Apple Discussions.
    Well I haven’t seen this problem.
    Start with the troubleshooting basics:
    1. Delete the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
    2. Repair Permissions using Disk Utility
    3. Create a new account (systempreferences -> accounts) and see if the problem is repeated there. If it is, then a re-install of the app might be indicated. If it's not, then it's likely the app is okay and the problem is something in the main account.
    Regards
    TD

  • Unable to boot from ODD or USB after windows 8.1 update on P850-31L

    Hi
    I just updated a P850-31L to windows 8.1 from windows 8 through the windows store.
    Before the update I was able to boot from a USB drive by pressing F12 during start up.
    After the update I was no longer able to boot from the USB drive. Selecting the USB drive by changing the boot order in BIOS setup via F2 or by pressing F12 no longer works.
    Booting from ODD is also no longer possible.
    The BIOS version is 6.70 and does not allow secure boot to be disabled. However the DVD and the USB stick I tried are signed Ubuntu 12.10 which worked prior to the upgrade. Fastboot in windows 8.1 is disabled.
    This would then appear to be a bug in the Toshiba BIOS? Or has the windows 8.1 updated the BIOS or the EFI boot partition in such a way as to override the BIOS setting? Really stuck here, doesn't seem to be much information about.
    Any thoughts or assistance would be very much appreciated!
    Thanks
    Michael
    Update: I just tried booting from the Toshiba windows 8 recovery DVD and this no longer works either.
    Message was edited by: michael_toshiba_forum

    OK I fixed this.
    Firstly it's worth noting that it is possible to to disable secure boot in the 6.70 BIOS.
    However this option is only available when the user password is not set in the security menu.
    After enabling or disabling the password a reboot is required to make the secure boot enable/disable option either available or unavailable.
    That's good I suppose as I guess it may prevent secure boot from being disabled when the machine is running. However this does not appear to have been related to this issue.
    I selected the 'reset to factory defaults' option on the exit menu.
    The machine was then able to boot from USB and DVD. The boot order was also respected.
    Perhaps the windows 8.1 upgrade somehow invisibly corrupted the BIOS settings. Or maybe it was just a stranage co-incidence that the BIOS corrupted itself during the install. Either way that factory reset fixed it.

  • IDT High Definition (HD) Audio Driver problem after windows 8.1 update 1.

    Hello. I have HP Probook 4730s. After I installed Windows 8.1 update 1 the sound driver stopped working properly. When I want to play some music, video or even system sounds, sound appears after 1-2 minutes. At that time HDD usage is 100% cause of windows audio device graph isolation. I’ve installed that IDT High Definition (HD) Audio Driver from HP’s driver support site, but that’s not working. As I see in device manager driver’s release date is 24.10.2012. I think, it’s too old for Windows 8.1. Can you help me? Is there any other newer version of that sound driver? Also I’m sending two pictures where are HDD usage and driver release date.

    Hello GDartsimelia,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand that after you installed Windows 8.1 on your notebook computer, the sound driver stopped working properly, and I would be happy to guide you towards a resolution!
    I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at:   
    http://h30499.www3.hp.com/t5/Notebook-HP-ProBook-EliteBook/bd-p/bsc-274
    I hope this helps!
    Regards 
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • After Windows 8.1 update Lenovo L420 has half the WLAN speed

    After the Windows 8.1 update my L420 WLan only works with 55 MBit max. In Windows 8.0 it was between 120 and 150 Mbit. I have the 1x1 11b/g/n W-LAN-PCI-Express-Half-Mini-Card-Adapter. Lenovo L420 is 7854-4LG.
    The WLAN driver is a Microsoft driver as in Windows 8 but a newer version.
    How can I get the Windows 8 driver back?
    Why doesn't provide Lenovo a driver as with Windows 7?
    Is Lenovo not testing any of their Laptops for compatibility?
    Any help?
    Michael
    Solved!
    Go to Solution.

    I found a solution in the meantime: I loaded  the driver for the RTL8188CE chipset from the REALTEK site.
    Now I'm back between 120 and 150 MBit.
    Michael

  • System gets Slow after 10.6.5 update

    So, I just updated it using standalone combo installer and straight away notice that to repair the disc permitions now takes 3 mins, before it took only 1min. even if there is nothing to repair. and futher more my whole system gets very slow after a few hours of using safari, skype, vuze, together and wasn't able to shut down just after using safari alone, had to press the power. havent been using anything else for so long so dont know how about it, but it seems to be ok. ah, im using airport to get to the internet if that's important.

    See:
    Mac Maintenance Quick Assist,
    Mac OS X speed FAQ,
    Speeding up Macs,
    Macintosh OS X Routine Maintenance
    Essential Mac Maintenance: Get set up,
    Essential Mac Maintenance: Rev up your routines,
    Maintaining OS X,
    Five Mac maintenance myths, and
    Myths of required versus not required maintenance for Mac OS X for information.

  • Running slow after downloading a mandatory update

    running slow after downloading an update!
    I had zero complaints until today when I downloaded an update and restarted my machine.
    Now It feels like I'm back in the PC world.
    Any suggestions?

    If it is Safari loading web pages slowly, I would suggest http://support.apple.com/kb/ts3230 or http://support.apple.com/kb/TS1594, one of these will surely help. If not, as previously suggested, more detail will greatly help.

  • MSI GT70 audio not working with hmdi after windows 8.1 update

    When I connect my laptop to the TV, the video comes out fine, but the audio for the TV does not show up in playback devices. It worked fine with windows 8, but after the windows 8.1 update it stopped.
    I have tried updating realtek drivers, but it still doesn't show up. updating other drivers also doesn't work. plugging the cable into the computer then booting it up also doesn't work like it did for other people. This is really making me mad... any help would be appreciated.

    Quote from: zipper.sippola on 16-December-14, 23:25:58
    Pah, no probs to my ext. monitor speakers via HDMI, GT70 0NE, Win 8.1.
    Have you tried assigning HDMI one on audio tab as default and see if sound will come out to tv? if so then that was the problem.

  • Network slow after 10.4.5 update

    Hi there, after installing the 10.4.5 update my PowerBook 12" is really slow when accessing network services. Web, Mail are impossibly slow.
    I have a cable modem broadband connection with a Belkin wireless router sharing the connection. The laptop connects via Airport and uses DHCP for autoconfiguration.
    I have tried the fix suggested on MacFixit of putting the DNS manually in the TCP/IP settings. Also I have turned off IPv6 which was also suggested to no avail.
    My other laptops with earlier system revisions are running fine (I am using one to write this) and I have tried the Mac on another network with the same effect so it has to be something that 10.4.5 has done to my poor alubook
    Can anyone help please.
    PowerBook 12" 867Mhz 1.12GB RAM   Mac OS X (10.4.5)  

    This was offered by MacFixit: Friday, February 24 2006 @ 09:30 AM PST
    Mac OS X 10.4.5 (#9): Another fix for network slowness -- re-applying the combo updater; SIIG FireWire card not working; more
    Another fix for network slowness -- re-applying the combo updater Over the past few days we've outlined a number of fixes for network slowness that occurs after the update to Mac OS X 10.4.5, including entry of a DNS address, toggling of IPv6 and more.
    We've now received notes indicating that a tried and true workaround for various issues -- re-applying the Mac OS X 10.4.5 combo updater (as noted in our general workarounds for 10.4.5) -- can have beneficial effects in this case as well.
    MacFixIt reader Fred Moore writes:
    "After much thrashing about and wasted time, I appear to have solved both the slow web page loading as well as my email sending problems in one stroke. Guess how: download the Mac OS X 10.4.5 combo updater and reapply it. This nonsense has cost me a lot of time but everything seems to work now. IPv6 is set back to Automatic, there is no entry in the Network prefs DNS server field, and my email sending works perfectly (so far; I've sent a bunch of tests). Why didn't I just download the combo updater and apply from my hard drive at the beginning? Well, Software Update should (yes, I know, I know...) work. I'll never again use Software Update for a system update."

  • Lenovo B590 I3 slow after Windows 8.1 upgrade

    Am looking for the best fix for slow laptop after Windows upgrade from 8 to 8.1

    Dear, alanj9za and somran. Mostly laptop runs slow issue occurs due to broken Windows registry entries. Fixing registry will help you to boost up your laptop. You need to download and install a Registry Cleaner program to fix corrupt or broken registry entries. To download a reliable registry cleaner, go to famous website download.cnet and search there Reginout. Which I personally use and recommend the friends. After downloading run all of its tools one by one except Internet Optimizer, to clean all the junks and registry errors from your computer.

Maybe you are looking for

  • Size and creation file tempOutlooksoftDatabase.bak

    Hi gurus!! Does Somebody know what program or job creates the file tempOutlooksoftDatabase.bak?

  • Best practice to set up the user authorization

    Dear expert, I have a question regarding the user authorization access. I've attend the BOE training but I'm still blur in term of user authorization planning. Currently, I have around 50 named users that need to access the BOE server. But the certai

  • Getting "Firmware Update Failure" when restoring

    My ipod mini kept giving me the folder and exclamation point icon and resetting didn't work to make it stop. I tried a few times to restore, but it keeps giving me the message "Firmware Update Failure. Disk Write Error" whenever I try to restore. Now

  • VIDEO Screen CAPTURE + Snapzpro

    I use snapzpro to video screen capture for demos that I produce. Recently a colleague sent me one captures with Camtasia software and the quality was fantastic compared with snapzpro. I've set the snapzpro options to the highest quality but it just d

  • OS updating problem

    My BBCurve9300 won't finish updating the operating system to the new OS6. I tried multiple times through the BlackBerry website and it wouldnt work, always said an error occured and it couldnt connect properly. Now I am trying it through my service p