Slow Bluetooth Printing

I have an HP deskjet 460 with an AmbiCom Bluetooth Printer Kit which has a USB sender unit for the computer and a reciever unit that plugs into the printer. I can print from the PowerBook G4 (10.4.4) on USB cable without a problem. Switching to BT still works, only it prints at about 4 minutes per 1 page, hardly useful. This same configuaration set up on 2 different XP laptops, prints the same documents with little or no delay. The printer works, the bluetooth kit works, what am I missing on the Mac? I've looked for drivers and firmware updates to no avail. Anyone have a suggestion on what to try next?
Thank you.

matt
i may have! i haven't looked at this specifically but i have been trying to sort out a networking printer problem, and came across this "tip" - when you are adding your printer if you alt and click on the more printers option you get the advanced options, which include bluetooth.
that may be worth a look?
good luck

Similar Messages

  • OfficeJet Pro L7700 Slow to print

    I have an HP OfficeJet Pro L7700 Series printer that is extremely slow at printing, and causing the print spooler service to pause or freeze for several minutes.
    - All the clients are running Windows 7 Professional 64-bit.
    - I have tested printing via an ethernet cable as well as wirelessly
    - I Have installed the latest driver from http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=ca&dlc=en&sw_lang=&product=2512...
    Here's exactly what I am experiencing:
    When I click print test page the properties window of the printer freezes for 30 seconds to one minute. If I move the window around it says its not responding. Approximately 1 to 15 minutes later I receive a message that the print job has been successfully sent to the printer, and then the printer prints the page.
    I have attempted uninstalling and reinstalling the software and driver as well.
    Any thoughts/suggestions/comments are greatly appreciated.
    Adam

    Hi @VexedHPUser 
    Perhaps the Microsoft Fix it utility will help;
    What it fixes
    You are unable to install a printer, connect to a printer, or print more than one job at a time
    You receive an error indicating your Print Spooler service is experiencing problems
    You receive an error indicating your is not the default printer
    You receive an error indicating: cannot be contacted over the network
    Identify if your printer is turned off
    Identify if your printer toner is low or empty causing your print job to appear faint or it does not print at all
    Identify if your printer paper is low or empty
    Identify if the printer has a paper jam which is preventing it from operating normally
    Identify if a print job that is in the print queue is preventing other print jobs from printing
    Identify if you need to update your print driver
    You receive an error stating that your Plug and Play printer %PRINTERNAME% has encountered a driver problem
    If the issue persists, I think it might be a good idea to reach out to the Microsoft Community.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • My 8620 HP Officejet Pro 8620 e-All-in-One Printer IS INCREDIBLY SLOW TO PRINT - TRIED EVERYTHING

    I have an 8620 HP Officejet Pro 8620 e-All-in-One Printer It is connected via wireless set-up, with excellent signal strength. It is incredibly slow to print anything, especially PDF files that have graphics in them. I have the latest software installed, latest firmware updates. I have even uninstalled and re-installed, the issue is still there. This is an incredibly crap product, so I'd like to get this issue solved ASAP. Thanks,Brian

    For example: printing http://www.nytimes.com/images/2015/07/04/nytfrontpage/scan.pdf Quickly goes 7.03mb/of 7.03mb... then just swirls the "printing" status on the printer's LCD screen, and takes 5 minutes to print...

  • HP Officejet100 Mobile L411a intermittent Bluetooth printing problems with PDF files

    Hello,
    Our company provides computer-hosted medical devices controlled by an application running on Windows7 computers we supply. We are currently using the HP Officejet 100 as a Bluetooth printer. In some of our customer offices, we experience printing problems using the printer in Bluetooth mode (there are never problems if the printer is connected by a USB cable.)
    The printing problems typically affect PDF files printed through Adobe Reader 10, and the symptom is one of the following:
    Send a print job to the printer. It doesn't print and eventually the print queue shows an "Error Printing" message. If any print jobs are removed and the printer is power-cycled, the problem goes away for the time being.
    2.  Same as above but power-cycling does not cure the problem and nothing will print, even a test page.
    In either of these cases there are no problems if a USB cable is used.
    The PDF files we are trying to print are typically 5 pages with 3 of the pages having a lot of graphics and the remainder being text only.
    Has anyone seen this behavior and is there anything we can do about it?
    Thanks.

    I don't anything about this printer, but I do know that bluetooth is really flaky with large files since it's got a crappy transfer rate, could be that the transfer is dropping and freezing the printer up. Does it have encryption turned on?

  • HT4356 Can I print a pdf document on my iPhone to a bluetooth printer that is not AirPrint capable

    I have the HP OfficeJet 100 portable printer with Bluetooth and it is NOT a model with AirPrint. From what I've found, I should be able to print a docuement using my iPhone but would need some print software. I cannot figure out what software they're talking about and cannot find anything on the HP or Apple sites.

    bluetooth is just an usb cable just wireless
    a driver is still required to print on a bluetooth printer
    ios don't have drivers in that respect and can't of cause ever ever use windows or osx drivers
    there are 2 options you have
    1. if hp's free printing app in app store (assuming they have one) can do it
    2. if you install netgear genie in a computer it will make all printers the computer have access to become airprint printers in the eyes of IOS of cause the computer have to be turned on when you print
    even though it's netgear who make the app one is not required to use a netgear router or the likes

  • Bluetooth printing to Canon MP610, Help!!!

    I have the Canon MP 610 printer and I have bought the bluetooth adaptor that was recommended from the Canon website. I can get my MacBook to recognize the printer but I cannot get it to connect. I get an error message that says there are no configurable services found on your device. This could be due to services not being enabled on the device, or the device might not have any services that need to be configured with the computer. See the docmentation that came with your device for more information. This helps me none because I have all my Canon instruction booklets and nothing tells me anything about how to get bluetooth printing, eventhough it has the capability. Anyone know how to fix this?

    Good morning everyone,
    I had experienced the same symptoms with a new MacBook Air and PIXMA iP100 printer via Bluetooth printing, (Air found the printer, created a new printer device, but failed to print, produced Error message 311), and found the following solution to be successful:
    Install the Canon non-CUPS driver version 7.3.2 (posted on Canon's support page for iP100 downloads), restart, and configure a new Bluetooth printer device from within the Print & Fax System Preferences selecting the "Canon IJ printer driver" - not the "Canon iP100 series" driver. It was as simple as that.
    Installing the non-CUPS 7.3.2 driver does not overwrite the 10.1.0 iP100 series CUPS driver. You will still be able to configure separate USB-wired and Bluetooth-enabled devices, using each of the drivers for the appropriate use.
    And, (as Steve Jobs might say), " just one more thing..."
    This solution worked with either very reasonably-priced Belkin or D-Link USB bluetooth adapters, so I suspect other generic Bluetooth adapters should suffice as well; there's no need to pay a premium price to obtain great results. Printing is also fast: it took 2 seconds to spool and 5 seconds to print a NeoOffice 1-page document with text and graphics. Not too shabby for the Bluetooth protocol.
    Hope this helps soothe some of that frustration out there...
    Best of luck& best regards,
    Marc

  • Canon MP 600 Bluetooth printing...

    Hello,
    The Canon MP600 simply will not print via Blueooth for me. I can control the device in Printer Setup Utility via BT. I can print via USB as well. I simply cannot work out how to get the infernal thing to print via BT.
    I am certain I am missing something really simple and obvious. Am I ?
    Thanks in advance
    Ian

    Hi Ian,
    It was suggested that I respond to you because I can print via my Canon MP600. All I did is plug in the printer. The only thing I can think of that you may not have done is that perhaps your Canon is mislabeled. This is what I would try: Go to Canon's website and under support you can get instructions on how to re-install all the drivers after you delete them. Do that. Then, when you plug in the printer anew, name it with the place you are trying to use it in parenthesis, e.g. Canon MP600 (Airport) or Canon MP600 (USB) or Canon MP600 (Bluetooth). It seems that the printer needs to be added as many times as places you want to use it. I have it listed twice (Airport & Bluetooth). Then I made sure that the bluetooth setup is set to recognize the (Bluetooth) printer. I have no problems printing via airport or via bluetooth.
    Lastly, I spoke with Canon, and they agree that this printer is unable to ever do anything other than print via airport & bluetooth. If you want a wireless printer, they suggest the Canon MP800R. I'm going to look into that option.
    I hope this was helpful.
    Cheers,
    Spencer

  • Problem with printing to a Bluetooth printer from T60p

    Hello,
    I have a Thinkpad T60p ( 2007-93G) and up to now I had no problem with using my HP Deskjet 460 MobilePrinter via Bluetooth. However, a few days ago I updated my "Thinkpad Bluetooth with Enhanced Data Rate Software" to v. 5.5.0.6400, and since then I have not been able to use the printer via Bluetooth.
    I investigated the problem by opening the printer Properties panel (right-click on printer icon; down to Properties), and at the same time the printer window (double-click on printer icon). In the printer properties panel I clicked on "Print Test Page", and then observed what was happening in the printer window. The test page appeared in the printer window, stayed for some time, and then was deleted. It appears that the printer software was sending the data somewhere, but the data never arrived at the printer. It would appear the the Bluetooth printer port is not working, or is configured incorrectly. I wonder if anybody else experienced a similar problem.
    Regards,
    bostjanv

    Thanks for your reply.
    I should have mentioned I am using Windows XP.
    No, there are no eps graphics in the document.
    Photoshop CS5 prints with no problems. I did a work-around by making a PDF and printing from that.
    As I mentioned there was no problem printing from the CS4 version.
    This may be a similar problem to the TWAIN problem in CS4.
    Again Thanks,
    Justin Kerr

  • Printing pictures via bluetooth to a bluetooth printer that is not online

    i was wondering if iphone will be able to send a picture or file to a bluetooth printer that is not online i'm out in the field alot and need to print pictures right there i have a bluetooth printer in my van. my old phone would send via bluetooth and i could give customer the pic at that time instead of having to bring them back to the customer. please advise
    thank you
    jimski3332002

    I suppose that would depend on the model of the printer, some print companies provide apps for wireless printing to certain models. But if the printer isn't online and you're looking for a BlueTooth only type of connection, it still may be a good idea to check out the app store to see if the makers of your particular printer have written an app making it possible for you to do so.

  • Wireless laptop, bluetooth printer Help please?

    I was confused about the difference in a wireless laptop and how it would connect to my new bluetooth printer.   I thought wireless was the same & now I can't connect unless I have the cable plugged in between the two.
    Can I get another bluetooth device to make them "talk" to each other & work without cables?

    Bluetooth and the 802.11 wireless on your laptop are 2 different technologies. even though they are wireless, they communicate using different frequencies, so it wont work.
    if you want to use the printer via bluetooth, you'll need a bluetooth dongle for your laptop.
    btw which printer are you using?
    Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
    Click on the BLUE KUDOS button on the left to say "Thanks"
    I am an ex-HP Employee.

  • Print option on WAP Browser via Bluetooth Printer

    Hi!
    I have Bluetooth printer then I wanted to print the WAP site on the WAP browser. Is there a way that I can print the page just like a typical Internet Explorer in my Computer?
    Please advise
    Many thank,
    Francis

    Hi!
    I have Bluetooth printer then I wanted to print the WAP site on the WAP browser. Is there a way that I can print the page just like a typical Internet Explorer in my Computer?
    Please advise
    Many thank,
    Francis

  • HP Bluetooth Printing

    One of the reasons for upgrading to a Z30 from a curve 9380 was to (hopefully) be able to print a pdf and the like, directly to my HP Office jet 150 via bluetooth. The 9380 was only capable of bluetooth photo printing. It seems with the z that neither is possible. I'm not interested in email or wifi printing. The idea is to be completely wireless as the OJ150 is a battery powered, color printer/scanner.
    Any help would be great!

    Marchanic wrote:
    One of the reasons for upgrading to a Z30 from a curve 9380 was to (hopefully) be able to print a pdf and the like, directly to my HP Office jet 150 via bluetooth. The 9380 was only capable of bluetooth photo printing. It seems with the z that neither is possible. I'm not interested in email or wifi printing. The idea is to be completely wireless as the OJ150 is a battery powered, color printer/scanner.
    Any help would be great!
    Hello, 
    Could you provide more details?
    What exactly have you tried that didn`t work?
    The only thing I get from your post is that with the Z30, bluetooth printing is not possible.  

  • IPhone and Bluetooth printing

    Hi
    With the latest iPhone OS(4), is bluetooth printing supported?
    If not directly from the existing apple apps, but using the SDK/development tools to connect and print (even text format output) to a bluetooth printer?
    I have a requirement to develop an app that needs to produce some output to a printer. Will this be possible?
    Urfan

    Hello
    Thanks for the reply but, Iam not looking to print via the existing apps, like photo/notes etc.., but from my own app.
    If a bluetooth connection is possible to a bluetooth 'device' (e.g. a small BT printer) then I would want to send output to the device.
    This output could be simple text/ASCII using spaces/tabs to align the data.
    In other words, can I connect in a similar fashion to a serial device via BT?
    Urfan

  • I just bought a new dell quad core 5i and HAVE DOWNLOADED THE TRIAL VERSION OF PHOTO SHOP - its Slow to open up a small file and equally as slow to print why?

    HELP I just bought a new dell quad core 5i and HAVE DOWNLOADED THE TRIAL VERSION OF PHOTO SHOP - its Slow to open up a small file and equally as slow to print why?

    Use Photoshop menu Help>system Info... use its copy button and paste that info in an append here.
    Supply pertinent information for quicker answers
    The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
    Adobe product and version number
    Operating system and version number
    The full text of any error message(s)
    What you were doing when the problem occurred
    Screenshots of the problem
    Computer hardware, such as CPU; GPU; amount of RAM; etc.

  • TouchPad Bluetooth Printing?

    Just wondering if you can print from a TouchPad to a bluetooth printer?
    Post relates to: HP TouchPad (WiFi)

    direstrates wrote:
    Does it have to be an HP printer?
    From what I'm told, it MIGHT work with a non-HP printer, but only HP Printers are officially supported.

Maybe you are looking for

  • ITunes 10.7 install wants to move my music library.

    I need to upgrade iTunes 10.6 on my Windows 7 Lenovo T420 laptop to 10.7 to use my new iPod Classic (replaces my iPod video), and I'm not yet ready to accommodate the changes in iTunes 11. My iTunes music data files have been moved to a large partiti

  • Mail: "Message contains NUL characters," not listed in ANY folder

    On occasion, I will hear a new message sound in Mail, and I will see the little progress indicator showing an incoming message, but there is no trace of it in the inbox. If I am there to see the incoming notice and remember the message content, I can

  • Report of discounts availed in POs

    HI Friends, Somebody pls let me know the Report / Transaction which will give the list of discounts taken in the POs (the POs in which there is value entered for discount-condition type ) Points will be promply given. Thanks in advance.

  • What is the bdc program for vendor master?

    what is the bdc program for vendor master?

  • Serialize or not?

    Hi I am new to jsp & java. I am slightly confused about how to go about using my database with my jsp app. Should I store all information in the database, initialize the objects everytime they are called & use them or store my objects as serialized o