Slow booting process
my pc is slow to boot up. when logging on, it takes several minutes to allow a user to log in or after a user logs in to open up - all you see is the spinning wheel.
Hi and welcome to Apple Discussions ...
You need to use your system restore disk. Shut down your Mac. While holding down the C key, press the power button and insert the restore disk all at the same time. Keep holding down the C key until you see the Apple logo. An Installer window will open, just ignore that. Instead from the menu click Utilities/Disk Utility. When Disk Utility opens, select MacintoshHD in the panel on the left, then select the First Aid tab, then click the Verify button. If DU reports errors, click the Repair button. When it's finished, click Utilities/Startup Disk from the Menu and select MacintoshHD 10.4 and click Restart.
Carolyn
Similar Messages
-
CD drive not recognized & Very slow boot process.
(I posted this in the newbie forum, but got no answer, so I give it another go)
Hi all,
After a few years alternating between gentoo and debian, feeling they were ok, but not exactly what I wanted, I found Arch, and now I am happy. It feels just right. I am still very new, but I am already quite sure I'll settle here.
But happyness and warm feelings asides, I have a 2 problems I'd like to get some help about.
problem 1: my CD drive is not recognized. my hard drive and its partitions show up correctly, but I don't get a cd drive.
problem 2: On the boot process, a lot of time (2 minutes or so) is spend scanning the ATA bus. relevant messages are as follow (plus a few lines before and after just to give context)
Code:
Freeing unused kernel memory: 256k freed
Time: acpi_pm clocksource has been installed.
ACPI: Unable to derive IRQ for device 0000:00:10.0
ACPI: PCI Interrupt 0000:00:10.0[A]: no GSI
ata1: PATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x2000 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x2008 irq 15
scsi0 : pata_ali
ata1.00: ATA-5, max UDMA/100, 78140160 sectors: LBA
ata1.00: ata1: dev 0 multi count 16
ata1.00: configured for UDMA/100
scsi1 : pata_ali
ata2.00: ATAPI, max UDMA/33
ata2.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA IC25N040ATCS04-0 CA4O PQ: 0 ANSI: 5
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2: port is slow to respond, please be patient (Status 0xd0)
ata2: soft resetting port
ata2.00: model number mismatch 'QSI CD-RW/DVD-ROM SBW-241' != ''
ata2.00: disabled
ata2: soft resetting port
ata2.00: ATAPI, max UDMA/33
ata2.00: configured for UDMA/33
ata2: EH complete
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2: port is slow to respond, please be patient (Status 0xd0)
ata2: soft resetting port
ata2.00: configured for UDMA/33
ata2: EH complete
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2: port is slow to respond, please be patient (Status 0xd0)
ata2: soft resetting port
ata2.00: configured for UDMA/33
ata2: EH complete
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2: port is slow to respond, please be patient (Status 0xd0)
ata2: soft resetting port
ata2.00: configured for UDMA/33
ata2: EH complete
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
problem 2 and 3 are probably related, and linked to the new pata system in the kernel, but I don't really know anything about it, and my understanding of the mkinitcpio is very very limited. here is mine anyway, comments stripped.
Code:
MODULES="pata_ali"
BINARIES=""
FILES=""
HOOKS="base udev autodetect pata usbinput keymap filesystems"
I had it with
Code:
MODULES="pata_ali ata_generic"
and with scsi in the HOOKS as the result of the install, but the behavior was exactly the same.
Oh, and the machine I am using is a 4 year old laptop. Nothing in there is scsi or sata.
I hope anyone can help me with those.
ThanksHi, I'm a "newbie" too. Coming from Gentoo/Debian. Installed Arch this week and I think it could be just the distro I have been looking for.
I too had the same problem and think it's related to the pata modules. ¿Did you have to use the legacy-ide option when installing from the CD? I'm using old hardware (4 year old laptop) and had the same symptoms you are describing. I exchanged pata with ide in mkinitcpio.conf. My MODULES and HOOKS looks like this:
MODULES="ide_disk ata_generic"
HOOKS="base udev autodetect ide keymap filesystems" (deleted scsi and sata also because I don't think I need them).
Then run mkinitcpio.
I also had to change my device names in /etc/fstab from:
/dev/sda2 / ext3 defaults 0 1
/dev/sda5 swap swap defaults 0 0
to:
/dev/hda2 / ext3 defaults 0 1
/dev/hda5 swap swap defaults 0 0
And finally /boot/grub/menu.lst from:
kernel /boot/vmlinuz26 root=/dev/sda2 ro
to
kernel /boot/vmlinuz26 root=/dev/hda2 ro
¿Any experienced user can confirm that I'm doing the right thing? I didn't find documentation in the wiki for old systems. Only the mention of an ide-legacy option.
Hope it helps.
Last edited by Malakin (2007-04-29 02:29:31) -
Slow Boot process + can install Intel Application Accelerator IAA
My system takes almost 35+ seconds to reach the log in screen of windows.. I think its pretty slow.. and secondly can i install Intel Application Accelerator or its only for Intel motherboards..??
Thanks35 seconds feels like a long time, but I dont' think it's that bad. It depends on how may services get started. With time, it will take longer as you install more software.
The IAA is only required, and only works, with the ICH5R raid setup. -
Applying Software Installation Policy Is Taking Long Time During Boot Process
1 of my servers is having slow boot up issue. I have enabled user environment debugging and the gpsvc.log file has been generated. I have also used the Windows Performance Analyzer to capture logs and results came back that the GP Client is taking a long
time in the boot process. So, I reckoned the slow boot is due to GPO but I am not sure where to look from this log file.
I have only paste part of the gpsvc.log file here due to limitation in the number of characters allowed to be posted. Would appreciate some good advise on this issue that I am facing.
GPSVC(34c.408) 04:03:30:109 ReadExtStatus: Reading Previous Status for extension {FB2CA36D-0B40-4307-821B-A13B252DE56C}
GPSVC(34c.408) 04:03:30:109 ReadExtStatus: Reading Previous Status for extension {fbf687e6-f063-4d9f-9f4f-fd9a26acdd5f}
GPSVC(34c.408) 04:03:30:109 GetMachineToken: Looping for authentication again.
GPSVC(34c.408) 04:03:30:109 ProcessGPOs: Logging Data for Target <SW01E772>.
GPSVC(34c.408) 04:03:30:109 GPLockPolicySection: Sid = (null), dwTimeout= 30000, dwFlags= 0
GPSVC(34c.408) 04:03:30:109 LockPolicySectioncalled for user <Machine>
GPSVC(34c.408) 04:03:30:109 Sync Lock Called
GPSVC(34c.408) 04:03:30:109 Writer Lock got immediately.
GPSVC(34c.408) 04:03:30:109 Lock taken successfully
GPSVC(34c.408) 04:03:30:109 UnLockPolicySectioncalled for user <Machine>
GPSVC(34c.408) 04:03:30:109 UnLockedsuccessfully
GPSVC(34c.408) 04:03:30:109 ProcessGPOs: OpenThreadTokenfailed with error 1008, assuming thread is not impersonating
GPSVC(34c.408) 04:03:30:109 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:30:109 ProcessGPOs: Processing extension Registry
GPSVC(34c.408) 04:03:30:125 ReadStatus: Read Extension's Previous status successfully.
GPSVC(34c.408) 04:03:30:125 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:30:125 CheckGPOs: No GPO changes and nosecurity group membership change and extension Registry has NoGPOChangesset.
GPSVC(34c.408) 04:03:30:125 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:30:125 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:30:125 ProcessGPOs: Processing extension Wireless Group Policy
GPSVC(34c.408) 04:03:30:125CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:30:125 CheckGPOs: No GPO changes but couldn't read extension Wireless Group Policy's status or policy time.
GPSVC(34c.408) 04:03:30:125 ProcessGPOs: Extension Wireless Group Policy skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:30:125 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:30:125 ProcessGPOs: Processing extension Group Policy Environment
GPSVC(34c.408) 04:03:30:125 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:30:125 CheckGPOs: No GPO changes but couldn't read extension Group Policy Environment's status or policy time.
GPSVC(34c.408) 04:03:30:125 ProcessGPOs: Extension Group Policy Environment skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:30:125 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:30:125 ProcessGPOs: Processing extension Group Policy Local Users and Groups
GPSVC(34c.408) 04:03:30:125 ReadStatus: Read Extension's Previous status successfully.
GPSVC(34c.408) 04:03:30:125 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:30:156 GPLockPolicySection: Sid = (null), dwTimeout= 30000, dwFlags= 0
GPSVC(34c.408) 04:03:30:156 LockPolicySectioncalled for user <Machine>
GPSVC(34c.408) 04:03:30:156 Sync Lock Called
GPSVC(34c.408)04:03:30:156 Writer Lock got immediately.
GPSVC(34c.408) 04:03:30:156 Lock taken successfully
GPSVC(34c.408) 04:03:30:156 ProcessGPOList: Entering for extension Group Policy Local Users and Groups
GPSVC(34c.408) 04:03:30:156 MachinePolicyCallback: Settingstatus UI to Applying Group Policy Local Users and Groups policy...
GPSVC(34c.408) 04:03:30:156 ProcessGPOList: No changes. CSEwill not be passed in the IwbemServicesintfptr
GPSVC(34c.364)04:03:30:156 Message Status = <Applying Group Policy Local Users and Groups policy...>
GPSVC(34c.364) 04:03:30:156 Setting GPsessionstate = 1
GPSVC(34c.408) 04:03:31:796 ProcessGroupPolicyCompletedExInternal: Entering. Extension = {17D89FEC-5C44-4972-B12D-241CAEF74509}, dwStatus= 0x0
GPSVC(34c.408) 04:03:31:953 GetWbemServices: CoCreateInstancesucceeded
GPSVC(34c.408) 04:03:36:031 ConnectToNameSpace: ConnectServerreturned 0x0
GPSVC(34c.408) 04:03:36:140 ProcessGroupPolicyCompletedExInternal: Extension {17D89FEC-5C44-4972-B12D-241CAEF74509} was able to log data. Error = 0x0, dwRet= 0. Clearing the dirty bit
GPSVC(34c.408) 04:03:36:500 ProcessGroupPolicyCompletedExInternal: Finished processing extension <Group Policy Local Users and Groups> at 44203 ticks (ms)
GPSVC(34c.408) 04:03:36:500 ProcessGroupPolicyCompletedExInternal: Leaving. Extension = {17D89FEC-5C44-4972-B12D-241CAEF74509}, Return status dwRet= 0x0
GPSVC(34c.408) 04:03:36:500 ProcessGPOList: Extension Group Policy Local Users and Groups returned 0x0.
GPSVC(34c.408) 04:03:36:500 ProcessGPOList: Extension Group Policy Local Users and Groups status was not updated because there was no changes and no transition or rsopwasn't enabled
GPSVC(34c.408) 04:03:36:500 UnLockPolicySectioncalled for user <Machine>
GPSVC(34c.408) 04:03:36:500 UnLockedsuccessfully
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: Processing extension Group Policy Device Settings
GPSVC(34c.408) 04:03:36:531 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:531 CheckGPOs: No GPO changes but couldn't read extension Group Policy Device Settings'sstatus or policy time.
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: Extension Group Policy Device Settings skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: Processing extension Folder Redirection
GPSVC(34c.408) 04:03:36:531 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:531 CheckGPOs: No GPO changes but couldn't read extension Folder Redirection's status or policy time.
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: Extension Folder Redirection skipped with flags 0x7.
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: Processing extension Microsoft Disk Quota
GPSVC(34c.408) 04:03:36:531 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:531 CheckGPOs: No GPO changes but couldn't read extension Microsoft Disk Quota's status or policy time.
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: Extension Microsoft Disk Quota skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: Processing extension Group Policy Network Options
GPSVC(34c.408) 04:03:36:531CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:546 CheckGPOs: No GPO changes but couldn't read extension Group Policy Network Options'sstatus or policy time.
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: Extension Group Policy Network Options skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: Processing extension QoSPacket Scheduler
GPSVC(34c.408) 04:03:36:546 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:546 CheckGPOs: No GPO changes but couldn't read extension QoSPacket Scheduler's status or policy time.
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: Extension QoSPacket Scheduler skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: Processing extension Scripts
GPSVC(34c.408) 04:03:36:546 ReadStatus: Read Extension's Previous status successfully.
GPSVC(34c.408) 04:03:36:546 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:546 CheckGPOs: No GPO changes and no security group membership change and extension Scripts has NoGPOChangesset.
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: Processing extension Remote Desktop USB Redirection
GPSVC(34c.408) 04:03:36:546 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:546 CheckGPOs: No GPO changes but couldn't read extension Remote Desktop USB Redirection's status or policy time.
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: Extension Remote Desktop USB Redirection skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: Processing extension Internet Explorer Zonemapping
GPSVC(34c.408) 04:03:36:562 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:562 CheckGPOs: No GPO changes but couldn't read extension Internet Explorer Zonemapping'sstatus or policy time.
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Extension Internet Explorer Zonemappingskipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Processing extension Group Policy Drive Maps
GPSVC(34c.408) 04:03:36:562 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:562 CheckGPOs: No GPO changes but couldn't read extension Group Policy Drive Maps'sstatus or policy time.
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Extension Group Policy Drive Maps skipped withflags 0x7.
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Processingextension Group Policy Folders
GPSVC(34c.408) 04:03:36:562 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:562 CheckGPOs: No GPO changes but couldn't read extension Group Policy Folders'sstatus or policy time.
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Extension Group Policy Folders skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Processing extension Group Policy Network Shares
GPSVC(34c.408) 04:03:36:562 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:562 CheckGPOs: No GPO changes but couldn't read extension Group Policy Network Shares's status or policy time.
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Extension Group Policy Network Shares skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Processing extension Group Policy Files
GPSVC(34c.408) 04:03:36:562 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:562 CheckGPOs: No GPO changes but couldn't readextension Group Policy Files's status or policy time.
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Extension Group Policy Files skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Processing extension Group Policy Data Sources
GPSVC(34c.408) 04:03:36:562 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:578 CheckGPOs:No GPO changes but couldn't read extension Group Policy Data Sources's status or policy time.
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: Extension Group Policy Data Sources skipped because bothdeleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: Processing extension Group Policy Ini Files
GPSVC(34c.408) 04:03:36:578 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:578 CheckGPOs: No GPO changes but couldn't read extension Group Policy Ini Files's status or policy time.
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: Extension GroupPolicy Ini Files skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: Processing extension Internet Explorer User Accelerators
GPSVC(34c.408) 04:03:36:578 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:578 CheckGPOs: No GPO changes but couldn't readextension Internet Explorer User Accelerators's status or policy time.
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: Extension Internet Explorer User Accelerators skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: Processing extension Security
GPSVC(34c.408) 04:03:36:578ReadStatus: Read Extension's Previous status successfully.
GPSVC(34c.408) 04:03:36:578 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:578 CheckGPOs: No GPO changes and no security group membership change and extension Security has NoGPOChanges set.
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: Processing extension Deployed Printer Connections
GPSVC(34c.408) 04:03:36:578 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:578 CheckGPOs: No GPO changes but couldn't read extension Deployed Printer Connections's status or policy time.
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: Extension Deployed Printer Connections skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: Processing extension Group Policy Services
GPSVC(34c.408) 04:03:36:593 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:593 CheckGPOs: No GPO changes but couldn't read extension Group Policy Services's status or policy time.
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: Extension Group Policy Services skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: Processing extension Internet Explorer Branding
GPSVC(34c.408) 04:03:36:593 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:593 CheckGPOs: No GPO changes but couldn't read extension Internet Explorer Branding's status or policy time.
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: Extension Internet Explorer Branding skipped with flags 0x7.
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: Processing extension Group PolicyFolder Options
GPSVC(34c.408) 04:03:36:593 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:593 CheckGPOs: No GPO changes but couldn't read extension Group Policy Folder Options's status or policy time.
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: Extension Group Policy Folder Options skipped because bothdeleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: Processing extension Group Policy Scheduled Tasks
GPSVC(34c.408) 04:03:36:593 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:593 CheckGPOs: No GPO changes but couldn't read extension Group Policy Scheduled Tasks's status or policy time.
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: Extension Group Policy Scheduled Tasks skipped because both deletedand changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: Processing extension Group Policy Registry
GPSVC(34c.408) 04:03:36:593 ReadStatus: Read Extension's Previous status successfully.
GPSVC(34c.408) 04:03:36:593 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:625 GPLockPolicySection: Sid = (null), dwTimeout = 30000, dwFlags = 0
GPSVC(34c.408)04:03:36:625 LockPolicySection called for user <Machine>
GPSVC(34c.408) 04:03:36:625 Sync Lock Called
GPSVC(34c.408) 04:03:36:625 Writer Lock got immediately.
GPSVC(34c.408) 04:03:36:625 Locktaken successfully
GPSVC(34c.408) 04:03:36:625 ProcessGPOList: Entering for extension Group Policy Registry
GPSVC(34c.408) 04:03:36:625 MachinePolicyCallback: Setting status UI to Applying Group Policy Registry policy...
GPSVC(34c.408) 04:03:36:625 ProcessGPOList: No changes. CSE will not be passed in the IwbemServices intf ptr
GPSVC(34c.364) 04:03:36:625 Setting GPsession state =1
GPSVC(34c.408) 04:03:36:765 ProcessGroupPolicyCompletedExInternal: Entering. Extension = {B087BE9D-ED37-454F-AF9C-04291E351182}, dwStatus = 0x0
GPSVC(34c.408) 04:03:36:796 GetWbemServices: CoCreateInstance succeeded
GPSVC(34c.408) 04:03:36:812 ConnectToNameSpace: ConnectServer returned 0x0
GPSVC(34c.408) 04:03:36:812 ProcessGroupPolicyCompletedExInternal: Extension {B087BE9D-ED37-454F-AF9C-04291E351182} was able to log data. Error = 0x0, dwRet = 0. Clearing the dirty bit
GPSVC(34c.408) 04:03:36:843 ProcessGroupPolicyCompletedExInternal: Finished processing extension <Group Policy Registry> at 44546 ticks (ms)
GPSVC(34c.408) 04:03:36:843 ProcessGroupPolicyCompletedExInternal: Leaving. Extension = {B087BE9D-ED37-454F-AF9C-04291E351182}, Return status dwRet = 0x0
GPSVC(34c.408) 04:03:36:843 ProcessGPOList: Extension Group Policy Registry returned 0x0.
GPSVC(34c.408) 04:03:36:843 ProcessGPOList: Extension Group Policy Registry status was not updated because there was no changes and no transition or rsop wasn'tenabled
GPSVC(34c.408) 04:03:36:843 UnLockPolicySection called for user <Machine>
GPSVC(34c.408) 04:03:36:843 UnLocked successfully
GPSVC(34c.408) 04:03:36:875 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:875 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:875 ProcessGPOs: Processing extension 802.3 Group Policy
GPSVC(34c.408) 04:03:36:875 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:875 CheckGPOs: No GPO changes but couldn't read extension 802.3 Group Policy's status or policy time.
GPSVC(34c.408) 04:03:36:875 ProcessGPOs: Extension 802.3 Group Policy skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:875 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:875 ProcessGPOs: Processing extension Group Policy Printers
GPSVC(34c.408) 04:03:36:875 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:875 CheckGPOs: No GPO changes but couldn't read extension Group Policy Printers's status or policy time.
GPSVC(34c.408) 04:03:36:875 ProcessGPOs: Extension Group Policy Printers skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:875 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:875 ProcessGPOs: Processing extension Group Policy Shortcuts
GPSVC(34c.408) 04:03:36:875 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:875 CheckGPOs: No GPO changes but couldn't read extension Group Policy Shortcuts's status or policy time.
GPSVC(34c.408) 04:03:36:875 ProcessGPOs: Extension Group Policy Shortcuts skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:875 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:890 ProcessGPOs: Processing extension Software Installation
GPSVC(34c.408) 04:03:36:890 ReadStatus: Read Extension's Previous status successfully.
GPSVC(34c.408) 04:03:36:890 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:890 GPLockPolicySection: Sid = (null), dwTimeout = 30000, dwFlags = 0
GPSVC(34c.408) 04:03:36:890 LockPolicySection called for user <Machine>
GPSVC(34c.408) 04:03:36:890 Sync Lock Called
GPSVC(34c.408) 04:03:36:890 Writer Lock got immediately.
GPSVC(34c.408) 04:03:36:890 Lock taken successfully
GPSVC(34c.408) 04:03:36:890 ProcessGPOList: Entering for extension Software Installation
GPSVC(34c.408) 04:03:36:890 MachinePolicyCallback: Setting status UI to Applying Software Installation policy...
GPSVC(34c.408) 04:03:36:890ProcessGPOList: No changes. CSE will not be passed in the IwbemServices intf ptr
GPSVC(34c.364) 04:03:36:890 Message Status = <Applying Software Installation policy...>
GPSVC(34c.364) 04:03:36:890 Setting GPsession state = 1
GPSVC(34c.408) 04:03:37:312 ProcessGPOList: Extension Software Installation returned 0x0.
GPSVC(34c.408) 04:03:37:312 ProcessGPOList: Extension Software Installation status was not updated because there was no changes and no transition or rsop wasn't enabled
GPSVC(34c.408) 04:03:37:312UnLockPolicySection called for user <Machine>
GPSVC(34c.408) 04:03:37:312 UnLocked successfully
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: Processing extension TCPIP
GPSVC(34c.408) 04:03:37:328 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:37:328 CheckGPOs: No GPO changes but couldn't read extension TCPIP's status or policy time.
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: Extension TCPIP skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: Processing extension Internet Explorer Machine Accelerators
GPSVC(34c.408) 04:03:37:328 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:37:328 CheckGPOs: No GPO changes but couldn't read extension Internet Explorer Machine Accelerators's status or policy time.
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: Extension Internet Explorer Machine Accelerators skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: Processing extension IP Security
GPSVC(34c.408) 04:03:37:328 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:37:328 CheckGPOs: No GPO changes but couldn't read extension IP Security's status or policy time.
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: Extension IP Security skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: Processing extension Group Policy Internet Settings
GPSVC(34c.408) 04:03:37:343 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:37:343 CheckGPOs: No GPO changes but couldn't read extension Group Policy Internet Settings's status or policy time.
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Extension Group Policy Internet Settings skipped with flags 0x7.
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Processing extension Group Policy Start Menu Settings
GPSVC(34c.408) 04:03:37:343 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:37:343 CheckGPOs: No GPO changes but couldn't read extension Group Policy Start Menu Settings's status or policy time.
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Extension Group Policy Start Menu Settings skipped because both deleted and changed GPO listsare empty.
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Processingextension Group Policy Regional Options
GPSVC(34c.408) 04:03:37:343 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:37:343 CheckGPOs: No GPO changes but couldn't read extensionGroup Policy Regional Options's status or policy time.
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Extension Group Policy RegionalOptions skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Processing extension Group Policy Power Options
GPSVC(34c.408) 04:03:37:343 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:37:343 CheckGPOs: No GPO changes but couldn't read extension Group Policy Power Options's status or policy time.
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Extension Group Policy Power Options skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Processing extension Audit Policy Configuration
GPSVC(34c.408) 04:03:37:343 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:37:343 CheckGPOs: No GPO changes but couldn't read extension Audit Policy Configuration's status or policy time.
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Extension Audit Policy Configuration skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Processing extension Group Policy Applications
GPSVC(34c.408) 04:03:37:359 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:37:359 CheckGPOs: No GPO changes but couldn't read extension Group Policy Applications's status or policy time.
GPSVC(34c.408) 04:03:37:359 ProcessGPOs: Extension Group Policy Applications skipped with flags 0x7.
GPSVC(34c.408) 04:03:37:359 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:359 ProcessGPOs: Processing extension Enterprise QoS
GPSVC(34c.408) 04:03:37:359 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:37:359 CheckGPOs: No GPO changes but couldn't read extension Enterprise QoS's status or policy time.
GPSVC(34c.408) 04:03:37:359 ProcessGPOs: Extension Enterprise QoS skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:37:359 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:359 ProcessGPOs: Processing extensionCP
GPSVC(34c.408) 04:03:37:359 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:37:359 CheckGPOs: No GPO changes but couldn't read extension CP's status or policy time.
GPSVC(34c.408) 04:03:37:359 ProcessGPOs: Extension CP skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:37:359 gpGetFgPolicyRefreshInfo: Mode: 1, Reason: 7
GPSVC(34c.408) 04:03:37:359 SetFgRefreshInfo: Previous Machine Fg policy Synchronous, Reason: SKU.
GPSVC(34c.408) 04:03:37:359 SetFgRefreshInfo: Next Machine Fg policy Synchronous, Reason: SKU.
GPSVC(34c.408) 04:03:37:359 ProcessGPOs: No WMI logging done in this policy cycle.
GPSVC(34c.408) 04:03:37:359 ProcessGPOs: Boot/Logon Policy processing - checking if UBPM trigger events need to be fired
GPSVC(34c.408) 04:03:37:375 CheckAndFireGPTriggerEvent: FiredPolicy present UBPM trigger event for Machine.
GPSVC(34c.408) 04:03:37:375 Application complete with bConnectivityFailure = 0.
GPSVC(34c.79c) 04:03:40:546 CGPNotify::RegisterForNotification: Entering with target Machine and event 0xc8c
GPSVC(34c.79c) 04:03:40:546 Client_InitialRegisterForNotification: User = machine, changenumber = 0
GPSVC(34c.3a0) 04:03:40:546 Target = Machine
GPSVC(34c.79c) 04:03:40:546 Client_RegisterForNotification: User =machine, changenumber = 0
GPSVC(34c.79c) 04:03:40:546 CGPNotify::RegisterForNotification: Exiting with status = 0
GPSVC(3bc.ac8) 04:03:59:296 CGPNotify::RegisterForNotification: Entering withtarget Machine and event 0x1ac
GPSVC(3bc.ac8) 04:03:59:296 Client_InitialRegisterForNotification: User = machine, changenumber = 0
GPSVC(34c.748) 04:03:59:296 Target = Machine
GPSVC(3bc.ac8) 04:03:59:296 Client_RegisterForNotification: User = machine, changenumber = 0
GPSVC(3bc.ac8) 04:03:59:296 CGPNotify::RegisterForNotification: Exiting with status = 0
GPSVC(34c.748) 04:03:59:343 Target = Machine
GPSVC(34c.748) 04:03:59:343 Target = Machine,ChangeNumber 0
GPSVC(34c.3ac) 04:03:59:515 Target = Machine
GPSVC(34c.3ac) 04:03:59:531 Target = Machine, ChangeNumber 0
GPSVC(34c.3ac) 04:03:59:531 Sid = (null), dwTimeout = 600000, dwFlags = 268435456
GPSVC(34c.3ac) 04:03:59:531 LockPolicySection calledfor user <Machine>
GPSVC(34c.3ac) 04:03:59:546 Async Lock called
GPSVC(34c.3ac) 04:03:59:546 Reader Lock got immediately. m_cReadersInLock : 1
GPSVC(34c.3ac) 04:03:59:546 Sid = (null)
GPSVC(34c.3ac) 04:03:59:546 UnLockPolicySection called for user <Machine>
GPSVC(34c.3ac) 04:03:59:546 Found the caller in the ReaderHavingLock List. Removing it...
GPSVC(34c.3ac) 04:03:59:546 Settinglock state as notLocked
GPSVC(34c.3ac) 04:03:59:546 UnLocked successfully
GPSVC(34c.bdc) 04:04:00:000 CGPNotify::RegisterForNotification: Entering with target Machine and event 0xd04
GPSVC(34c.bdc) 04:04:00:000 Client_InitialRegisterForNotification: User = machine, changenumber = 0
GPSVC(34c.3ac) 04:04:00:000 Target =Machine
GPSVC(34c.bdc) 04:04:00:000 Client_RegisterForNotification: User = machine, changenumber = 0
GPSVC(34c.bdc) 04:04:00:000 CGPNotify::RegisterForNotification: Exiting with status = 0
GPSVC(34c.3ac) 04:04:00:000 Target = Machine, ChangeNumber 0
GPSVC(34c.748) 04:04:01:140 Target = Machine
GPSVC(34c.748) 04:04:01:140 Target = Machine, ChangeNumber 0
GPSVC(154.41c) 04:05:25:509CGPNotify::RegisterForNotification: Entering with target Machine and event 0x458
GPSVC(154.41c) 04:05:25:509 Client_InitialRegisterForNotification: User = machine, changenumber = 0
GPSVC(34c.3ac) 04:05:25:509 Target = Machine
GPSVC(154.41c) 04:05:25:525 Client_RegisterForNotification: User = machine, changenumber = 0
GPSVC(34c.3ac) 04:05:25:525 Target = Machine, ChangeNumber 0
GPSVC(154.41c) 04:05:25:525 CGPNotify::RegisterForNotification: Exiting with status = 0
GPSVC(154.41c) 04:05:25:759 CGPNotify::RegisterForNotification: Entering with target Machine and event 0x4e8
GPSVC(154.41c) 04:05:25:759 Client_InitialRegisterForNotification: User = machine, changenumber = 0
GPSVC(34c.3ac) 04:05:25:759 Target = Machine
GPSVC(154.41c) 04:05:25:775 Client_RegisterForNotification: User = machine, changenumber = 0
GPSVC(154.41c) 04:05:25:775 CGPNotify::RegisterForNotification: Exiting with status = 0
GPSVC(34c.3ac) 04:05:25:775 Target = Machine, ChangeNumber 0
GPSVC(34c.3ac) 04:05:59:217 Target = Machine
GPSVC(34c.3ac)04:05:59:233 Target = Machine, ChangeNumber 0
GPSVC(3bc.3cc) 04:05:59:389 CGPNotify::UnregisterNotification: Entering with event 0x1ac
GPSVC(3bc.3cc) 04:05:59:389 CGPNotify::AbortAsyncRegistration: No asyn registration is pending
GPSVC(3bc.3cc) 04:05:59:405 CGPNotify::UnregisterNotification: Canceling pending calls
GPSVC(3bc.3cc) 04:05:59:420 Client_CompleteNotificationCall: failed with 0x4c7
GPSVC(3bc.3cc) 04:05:59:420 CGPNotify::UnregisterNotification: Cancelled pending calls
GPSVC(3bc.3cc) 04:05:59:420 CGPNotify::UnregisterNotification: Exiting with dwStatus = 0x0
GPSVC(34c.360) 04:06:00:827 Target = Machine
GPSVC(34c.360) 04:06:00:827 Target = Machine, ChangeNumber 0
GPSVC(34c.360) 04:06:01:155 Target = Machine
GPSVC(34c.360) 04:06:01:171 Target = Machine, ChangeNumber 0
GPSVC(34c.fe8) 04:06:02:124 CGPNotify::RegisterForNotification: Entering with target Machine and event 0x218
GPSVC(34c.fe8) 04:06:02:140 Client_InitialRegisterForNotification: User = machine, changenumber = 0
GPSVC(34c.360) 04:06:02:155 Target = Machine
GPSVC(34c.fe8) 04:06:02:155 Client_RegisterForNotification: User = machine, changenumber = 0
GPSVC(34c.fe8) 04:06:02:171 CGPNotify::RegisterForNotification: Exiting with status = 0
GPSVC(34c.da4) 05:06:16:856 Target = Machine
GPSVC(34c.da4) 05:06:16:856 Target = Machine, ChangeNumber 0
GPSVC(34c.da4) 05:06:16:856 Target = S-1-5-20
GPSVC(34c.da4) 05:06:16:856 Could not find user by sid, finding user by session id
GPSVC(34c.da4) 05:06:16:856 Caller requesting for user notification/lock is from session 0
GPSVC(34c.da4) 05:06:16:856 Target = S-1-5-20, ChangeNumber 0
GPSVC(34c.da4) 05:06:16:856 Could not find user by sid, finding user by session id
GPSVC(34c.de8) 05:06:16:856 Target = S-1-5-20
GPSVC(34c.de8) 05:06:16:856 Could not find user by sid, finding user by session id
GPSVC(34c.de8) 05:06:16:872 Callerrequesting for user notification/lock is from session 0
GPSVC(34c.de8) 05:06:16:872 Target = S-1-5-20, ChangeNumber 0
GPSVC(34c.de8) 05:06:16:872 Could not find user by sid, finding user by session id
GPSVC(34c.de8) 05:06:16:872 Caller requesting for usernotification/lock is from session 0
GPSVC(34c.da4) 05:06:16:872Target = S-1-5-20
GPSVC(34c.da4) 05:06:16:872 Could not find user by sid, finding user by session id
GPSVC(34c.da4) 05:06:16:872 Caller requesting for user notification/lock is from session 0
GPSVC(34c.da4) 05:06:16:872 Target = S-1-5-20, ChangeNumber 0
GPSVC(34c.da4) 05:06:16:872 Could not find user by sid, finding user by session id
GPSVC(34c.da4) 05:06:16:872 Caller requesting for user notification/lock is from session 0
GPSVC(34c.de8) 05:06:16:887 Target = S-1-5-20
GPSVC(34c.de8) 05:06:16:887 Could notfind user by sid, finding user by session id
GPSVC(34c.de8) 05:06:16:887 Caller requesting for user notification/lock is from session 0
GPSVC(34c.de8) 05:06:16:887 Target = S-1-5-20, ChangeNumber 0
GPSVC(34c.de8) 05:06:16:887 Could not find user by sid, finding user by session id
GPSVC(34c.de8) 05:06:16:887 Caller requesting for user notification/lock is from session 0
GPSVC(34c.da4) 05:06:26:981 Setting GPsession state = 1
GPSVC(34c.de8) 05:06:32:341 SID = S-1-5-21-206128196-3657029889-627342018-7757
GPSVC(34c.de8) 05:06:32:356 bMachine = 0
GPSVC(34c.de8) 05:06:32:356 Setting GPsession state = 1
GPSVC(34c.de8) 05:06:32:356 Message Status = <Applying user settings...>
GPSVC(34c.778) 05:06:32:356 StartTime For network wait: 32140ms
GPSVC(34c.778) 05:06:32:356 Current Time: 3819953ms
GPSVC(34c.de8) 05:06:32:356 Setting GPsession state = 1
GPSVC(34c.778) 05:06:32:356 MaxTimeToWaitForNetwork: 5212ms
GPSVC(34c.778) 05:06:32:356 TimeRemainingToWaitForNetwork: 0ms
GPSVC(34c.778) 05:06:32:356 UserPolicy: Waiting for machine policy wait for network event with timeout 0 ms
GPSVC(34c.778) 05:06:32:388 GPLockPolicySection: Sid = (null), dwTimeout = 30000, dwFlags = 65538
GPSVC(34c.778) 05:06:32:388 LockPolicySection called for user <Machine>Hi,
Any update?
Just checking in to see if the suggestions were helpful. Please let us know if you would like further assistance.
Best Regards,
Andy Qi
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Andy Qi
TechNet Community Support -
New W530 Type 2436-CTO with Win 7 Pro, 16gb RAM, 256gb SSD. This is my second W530
Problem when I boot is it boots very quickly to the Welcome screen and then instead of going to the Win 7 Home screen, the screen goes dark except for the cursor and stays dark with hard drive activiity for about 45 to 55 seconds before the home screen pops up. After than the computer runs as normal and very fast.
Some thing in the boot sequence must be the problem. I did all the Windows updates, MS updates and Lenovo updates. I am mainly a user so any help needs to be specific with detail directions. Hate to send it back when it all works perfectly except it takes near two minutes to boot.
Last W530 boot like lightning - Please help meWhen I have had slow booting problems, I have found help via a web search for 'diagnose slow boot times Windows 7', or the like.
At the stage where you are having the long delay, there should be Event Logs listing how long each step in the boot process is taking, and whether that is a change from the previous time the computer booted.
Here is a guide I have found helpful:
http://itexpertvoice.com/home/what%E2%80%99s-taking-so-long-how-to-fight-slow-startup-times-in-windo...
^^ It walks you through looking at the Event Logs for particular types of messages, especially related to new delays in startup.
Hope you find your issue and get it fixed.
-JV474 -
PC with slow boot and pc speed, sudden high pc usage, delay-freeze when opening/performing something
Hi,
Before everything, two things:
1. I'm not a native english speaker so i may have some problems to speak properly/as objective as i'd like to.
2 . I'm writing in this section because i don't know the cause of my pc issues so i can't categorize them.
Now, my computer is a Toshiba satellite L755-S5244, Windows 7 Home premium 64 bits, Intel pentium CPU B940 2Ghz, 4 Gb RAM, and I'm writing this message using it.
I bought the laptop in December of 2011 and at the beggining it was working normally. Someone else used the computer these last months and he left the pc without antivirus protection; when i installed one (Avast) and start to analyze the pc it suddenly shutted down. It wasn't able to boot, so after some trys to restore/enter in safe mode I finally used the Toshiba Recovery Wizard to get the pc to the original factory settings. The process was sucessfull, so the first thing i did after finish the process was install a new antivirus (this time i used Kaspersky Pure) and the the analysis showed no threats as i expected.
However, before the recovery process i realized of some slow performance on the computer, like talking a bit too long to opening files or menus, control panel... almost anything was opening with a little delay even just after start the pc. This problem continued even after the recovery process. Also, an online game -League of legends- which was working fine when i just bought the pc, developed some issue: the screen and the audio randomly frezees for like 3-5 seconds. These problems seems to be related between each other.
But that wasn't all. After the recovery to the original factory settings, i just installed a few things:
-Kaspersky Pure 2.0, CCleaner (free), Mozila Firefox, and League of legends.
Later I also installed Microsoft Office 2010.
The antivirus showed no threats. The game kept with the freeze thing.
And 2 days ago i was playing league of legends and downloading Skype when the pc suddenly got too slow. I restarted it. After the restart it took a long time to boot, and before the windows login screen loaded there was a black screen where only the mouse was showed; the start-up was slow too, (this one showed a blue screen with the mouse too -but not BSOD-) all this took like 15-20 minutes; that never happened before so i restarted the computer again but the problem was the same: slow boot, slow desktop start-up (let's not even talk about opening something).
I went to the repair menu (f8) and try to restore the system but it didn't change anything. I checked for memory issues but there wasn't. I looked also for starting problems but the repair didn't find anything. All in there was saying: "the computer performance seems normal", but it wasn't. Like entering to windows in normal mode was talking to long, i tried the safe mode. It was also slow but not that much. When i entered, a system restore which i wasn't able to performance before in normal mode popped-up and said that the system was restored sucessfully to the first restore point -just after the factory recovery, but it apparently didn't fix the slow bot issue.
Even in safe mode the software was working slow so i decided to go for the toshiba recovery wizard again, and looked in here, the forums -and the rest of the net- for problems like mine.
This time the Toshiba Recovery Wizard took like ages to finish. 3 hours just for recovering, and like 7 more hours just installing the drivers. The boot/start-up was still slow, so i think this was the cause of the slow recovery because the wizard restarts the computer a lot.
When the factory settings recovery finished, the first boot was slow, also the start up, the programs, the start menu, the control panel, ... everything was slow the first time i opened it. If i keep using the same program, it seems normal, but randomly freezes if i select some option, of press something (like this browser, google chrome, even now when i'm writing this message or before where i was registering into the forums). As obvious, because this slow performance i'm really not comfortable using this computer.
I used the HDD SDD Alert but it says the HDD is working fine (the hard drive doesn't make weirds sounds, i almost don't hear it at all); also i did a PC Diagnostic with the PC diagnostic tool and everything passed the test. I can't think of virus/malware because i did the recovery wizard, twice. I just installed Avast again and it didn't find anything. With the task manager i noticed of a high pc usage (almost always 100%) was showing for a really short moment when/after the computer freezes.
So, i don't know how to solve this slow performance.
The last thing i did was download those speed-up softwares: SpeedUpMyPc, RegCurePro, SpeedyPC pro and Pareto logic Health Advisor. They scanned the pc for free and found like 100 system performance issues, but I'm not able to use these programms to fix the issues if i dont buy them. Also i'm not even sure if that will fix my problems.
That's why i'm here, looking for a way to identify/fix them. One last thing: all this time i've been checking the temperature of the laptop but is never hot -now is not even warm. Now i'm afraid of restarting the PC again cuz i know it will take a long time to get into a kinda stable performance like right now.
So that's all. If you read all this, have my thanks. Also, any help would be really appreciated it.
EDIT:
A new thing happened. When i try to installed league of legends, the setup told me that my hard drive may be corrupted and the file won't copy, i skip it a few times but the installation took a long of time (half hour) and the error kept ocurring. I hope this can may be a clue about what is happening to my pc.Satellite L755-S5244
If you restore the hard disk to its original out-of-the-box contents using Toshiba recovery media and still have trouble, then you know it's not due to software.
the setup told me that my hard drive may be corrupted and the file won't copy, i skip it a few times but the installation took a long of time (half hour) and the error kept ocurring.
In particular, that sort of thing occurs when a hard drive is failing. Time to call Toshiba's tech support at 1-800-457-7777 (from the US) or 1-949-859-4273 (from outside the US).
-Jerry -
Slow boot and overall system sluggishness.
My Macbook Pro is booting up very slow sometimes. It will take 10-15 minutes to be usable even though there are almost no startup items. It will happen only sometimes, most of the time I will boot in about a minute like it should. Still the system will slow down from time to time, for example the photoshop file open dialogue is extremely slow as is accessing files in the finder.
I already did PRAM and SMC reset and repaired permissions using the restore partition. Below are my EtreCheck results and a bootlog from a slow boot a few days ago.
EtreCheck version: 1.9.15 (52)
Report generated 3. Oktober 2014 16:59:07 MESZ
Hardware Information: ?
MacBook Pro (13-inch, Early 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.7 GHz Intel Core i7 CPU: 2 cores
8 GB RAM
Video Information: ?
Intel HD Graphics 3000 - VRAM: 512 MB
Color LCD 1280 x 800
System Software: ?
OS X 10.9.5 (13F34) - Uptime: 0 days 21:8:6
Disk Information: ?
Hitachi HTS547550A9E384 disk0 : (500,11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209,7 MB
HDD (disk0s2) / [Startup]: 499,25 GB (375,48 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-8A8
USB Information: ?
Apple Inc. iPhone
Native Instruments Audio Kontrol 1
Apple Computer, Inc. IR Receiver
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Thunderbolt Information: ?
Apple Inc. thunderbolt_bus
Configuration files: ?
/etc/hosts - Count: 31
Gatekeeper: ?
Mac App Store and identified developers
Kernel Extensions: ?
[loaded] com.caiaq.driver.NIUSBHardwareDriver (2.6.0 - SDK 10.8) Support
[not loaded] com.caiaq.driver.NIUSBMaschineControllerDriver (2.5.2 - SDK 10.7) Support
Launch Daemons: ?
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.adobe.SwitchBoard.plist Support
[loaded] com.klieme.TMSHelper.plist Support
[not loaded] com.maintain.AutoLoginUserScreenLocked.plist Support
[not loaded] com.maintain.CocktailScheduler.plist Support
[not loaded] com.maintain.HideSpotlightMenuBarIcon.plist Support
[not loaded] com.teamviewer.teamviewer_service.plist Support
[loaded] net.freemacsoft.LiteIcon.LIHelperTool.plist Support
Launch Agents: ?
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[not loaded] com.maintain.LogOut.plist Support
[not loaded] com.maintain.PurgeInactiveMemory.plist Support
[not loaded] com.maintain.Restart.plist Support
[not loaded] com.maintain.ShutDown.plist Support
[not loaded] com.maintain.Sleep.plist Support
[running] com.maintain.SystemEvents.plist Support
[not loaded] com.teamviewer.teamviewer.plist Support
[not loaded] com.teamviewer.teamviewer_desktop.plist Support
User Launch Agents: ?
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.google.keystone.agent.plist Support
User Login Items: ?
iTunesHelper
Alfred 2
WDQuickView
Internet Plug-ins: ?
AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 Support
FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
Default Browser: Version: 537 - SDK 10.9
AdobePDFViewerNPAPI: Version: 10.1.12 Support
AdobePDFViewer: Version: 10.1.12 Support
Flash Player: Version: 15.0.0.152 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
Safari Extensions: ?
Adblock Plus
ClickToPlugin-2
Awesome Screenshot (Disabled)
LinkThing
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes: ?
Flash Player Support
Native Instruments USB Audio Support
Time Machine: ?
Skip System Files: NO
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
HDD: Disk size: 464.96 GB Disk used: 115.27 GB
Destinations:
TimeMachine [Network] (Last used)
Total size: 3 TB
Total number of backups: 17
Oldest backup: 2014-08-03 17:35:39 +0000
Last backup: 2014-09-30 20:23:15 +0000
Size of backup disk: Excellent
Backup size 3 TB > (Disk size 464.96 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU: ?
7% WindowServer
5% Safari
2% hidd
0% fontd
0% SystemUIServer
Top Processes by Memory: ?
180 MB Safari
147 MB mds_stores
131 MB com.apple.IconServicesAgent
115 MB Finder
82 MB com.apple.WebKit.WebContent
Virtual Memory Information: ?
3.46 GB Free RAM
2.05 GB Active RAM
1.19 GB Inactive RAM
1.30 GB Wired RAM
691 MB Page-ins
0 B Page-outs
29.09.14 09:06:40,000
bootlog[0]
BOOT_TIME 1411974400 0
29.09.14 09:09:10,000
syslogd[20]
Configuration Notice:
ASL Module "com.apple.appstore" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
29.09.14 09:09:10,000
syslogd[20]
Configuration Notice:
ASL Module "com.apple.authd" sharing output destination "/var/log/system.log" with ASL Module "com.apple.asl".
Output parameters from ASL Module "com.apple.asl" override any specified in ASL Module "com.apple.authd".
29.09.14 09:09:10,000
syslogd[20]
Configuration Notice:
ASL Module "com.apple.authd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
29.09.14 09:09:10,000
syslogd[20]
Configuration Notice:
ASL Module "com.apple.bookstore" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
29.09.14 09:09:10,000
syslogd[20]
Configuration Notice:
ASL Module "com.apple.eventmonitor" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
29.09.14 09:09:10,000
syslogd[20]
Configuration Notice:
ASL Module "com.apple.install" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
29.09.14 09:09:10,000
syslogd[20]
Configuration Notice:
ASL Module "com.apple.iokit.power" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
29.09.14 09:09:10,000
syslogd[20]
Configuration Notice:
ASL Module "com.apple.mail" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
29.09.14 09:09:10,000
syslogd[20]
Configuration Notice:
ASL Module "com.apple.MessageTracer" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
29.09.14 09:09:10,000
syslogd[20]
Configuration Notice:
ASL Module "com.apple.performance" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
29.09.14 09:09:10,000
syslogd[20]
Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
29.09.14 09:09:10,000
syslogd[20]
Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
29.09.14 09:09:10,000
syslogd[20]
Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
29.09.14 09:09:10,000
syslogd[20]
Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
29.09.14 09:09:10,000
syslogd[20]
Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
29.09.14 09:09:10,000
syslogd[20]
Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
29.09.14 09:09:10,000
syslogd[20]
Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
29.09.14 09:09:10,000
kernel[0]
Longterm timer threshold: 1000 ms
29.09.14 09:09:10,000
kernel[0]
PMAP: PCID enabled
29.09.14 09:09:10,000
kernel[0]
Darwin Kernel Version 13.4.0: Sun Aug 17 19:50:11 PDT 2014; root:xnu-2422.115.4~1/RELEASE_X86_64
29.09.14 09:09:10,000
kernel[0]
vm_page_bootstrap: 1953945 free pages and 126823 wired pages
29.09.14 09:09:10,000
kernel[0]
kext submap [0xffffff7f807a9000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff80007a9000]
29.09.14 09:09:10,000
kernel[0]
zone leak detection enabled
29.09.14 09:09:10,000
kernel[0]
"vm_compressor_mode" is 4
29.09.14 09:09:10,000
kernel[0]
standard timeslicing quantum is 10000 us
29.09.14 09:09:10,000
kernel[0]
standard background quantum is 2500 us
29.09.14 09:09:10,000
kernel[0]
mig_table_max_displ = 74
29.09.14 09:09:10,000
kernel[0]
TSC Deadline Timer supported and enabled
29.09.14 09:09:10,000
kernel[0]
"name" not a kext
29.09.14 09:09:10,000
kernel[0]
AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
29.09.14 09:09:10,000
kernel[0]
AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
29.09.14 09:09:10,000
kernel[0]
AppleACPICPU: ProcessorId=3 LocalApicId=1 Enabled
29.09.14 09:09:10,000
kernel[0]
AppleACPICPU: ProcessorId=4 LocalApicId=3 Enabled
29.09.14 09:09:10,000
kernel[0]
AppleACPICPU: ProcessorId=5 LocalApicId=255 Disabled
29.09.14 09:09:10,000
kernel[0]
AppleACPICPU: ProcessorId=6 LocalApicId=255 Disabled
29.09.14 09:09:10,000
kernel[0]
AppleACPICPU: ProcessorId=7 LocalApicId=255 Disabled
29.09.14 09:09:10,000
kernel[0]
AppleACPICPU: ProcessorId=8 LocalApicId=255 Disabled
29.09.14 09:09:10,000
kernel[0]
calling mpo_policy_init for Sandbox
29.09.14 09:09:10,000
kernel[0]
Security policy loaded: Seatbelt sandbox policy (Sandbox)
29.09.14 09:09:10,000
kernel[0]
calling mpo_policy_init for Quarantine
29.09.14 09:09:10,000
kernel[0]
Security policy loaded: Quarantine policy (Quarantine)
29.09.14 09:09:10,000
kernel[0]
calling mpo_policy_init for TMSafetyNet
29.09.14 09:09:10,000
kernel[0]
Security policy loaded: Safety net for Time Machine (TMSafetyNet)
29.09.14 09:09:10,000
kernel[0]
Copyright (c) 1982, 1986, 1989, 1991, 1993
29.09.14 09:09:10,000
kernel[0]
The Regents of the University of California. All rights reserved.
29.09.14 09:09:10,000
kernel[0]
MAC Framework successfully initialized
29.09.14 09:09:10,000
kernel[0]
using 16384 buffer headers and 10240 cluster IO buffer headers
29.09.14 09:09:10,000
kernel[0]
AppleKeyStore starting (BUILT: Aug 17 2014 20:21:39)
29.09.14 09:09:10,000
kernel[0]
IOAPIC: Version 0x20 Vectors 64:87
29.09.14 09:09:10,000
kernel[0]
ACPI: sleep states S3 S4 S5
29.09.14 09:09:10,000
kernel[0]
pci (build 20:04:33 Aug 17 2014), flags 0x63008, pfm64 (36 cpu) 0xf80000000, 0x80000000
29.09.14 09:09:10,000
kernel[0]
[ PCI configuration begin ]
29.09.14 09:09:10,000
kernel[0]
console relocated to 0xf80000000
29.09.14 09:09:10,000
kernel[0]
[ PCI configuration end, bridges 12, devices 16 ]
29.09.14 09:09:10,000
kernel[0]
AppleIntelCPUPowerManagement: Turbo Ratios 0057
29.09.14 09:09:10,000
kernel[0]
AppleIntelCPUPowerManagement: (built 20:17:40 Aug 17 2014) initialization complete
29.09.14 09:09:10,000
kernel[0]
mcache: 4 CPU(s), 64 bytes CPU cache line size
29.09.14 09:09:10,000
kernel[0]
mbinit: done [96 MB total pool size, (64/32) split]
29.09.14 09:09:10,000
kernel[0]
Pthread support ABORTS when sync kernel primitives misused
29.09.14 09:09:10,000
kernel[0]
BTCOEXIST off
29.09.14 09:09:10,000
kernel[0]
BRCM tunables:
29.09.14 09:09:10,000
kernel[0]
pullmode[1] txringsize[ 256] txsendqsize[1024] reapmin[ 32] reapcount[ 128]
29.09.14 09:09:10,000
kernel[0]
rooting via boot-uuid from /chosen: 176B7B54-8174-3798-BF61-52E2B0E98E94
29.09.14 09:09:10,000
kernel[0]
Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
29.09.14 09:09:10,000
kernel[0]
com.apple.AppleFSCompressionTypeDataless kmod start
29.09.14 09:09:10,000
kernel[0]
com.apple.AppleFSCompressionTypeLZVN kmod start
29.09.14 09:09:10,000
kernel[0]
com.apple.AppleFSCompressionTypeZlib kmod start
29.09.14 09:09:10,000
kernel[0]
FireWire (OHCI) Lucent ID 5901 built-in now active, GUID a4b197fffe9af848; max speed s800.
29.09.14 09:09:10,000
kernel[0]
com.apple.AppleFSCompressionTypeDataless load succeeded
29.09.14 09:09:10,000
kernel[0]
com.apple.AppleFSCompressionTypeLZVN load succeeded
29.09.14 09:09:10,000
kernel[0]
com.apple.AppleFSCompressionTypeZlib load succeeded
29.09.14 09:09:10,000
kernel[0]
AppleIntelCPUPowerManagementClient: ready
29.09.14 09:09:10,000
kernel[0]
Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/Hitachi HTS547550A9E384 Media/IOGUIDPartitionScheme/HRVSTR HDD@2
29.09.14 09:09:10,000
kernel[0]
BSD root: disk0s2, major 1, minor 2
29.09.14 09:09:10,000
kernel[0]
AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitialized
29.09.14 09:09:10,000
kernel[0]
Thunderbolt Self-Reset Count = 0xedefbe00
29.09.14 09:09:10,000
kernel[0]
hfs: mounted HDD on device root_device
29.09.14 09:09:10,000
kernel[0]
Waiting for DSMOS...
29.09.14 09:09:10,000
kernel[0]
process taskgated[13] caught causing excessive wakeups. Observed wakeups rate (per sec): 1423; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 45017
29.09.14 09:07:18,002
com.apple.launchd[1]
*** launchd[1] has started up. ***
29.09.14 09:07:18,002
com.apple.launchd[1]
*** Shutdown logging is enabled. ***
29.09.14 09:08:43,028
fseventsd[45]
event logs in /.fseventsd out of sync with volume. destroying old logs. (3 122 43080)
29.09.14 09:08:53,416
hidd[44]
void __IOHIDPlugInLoadBundles(): Loaded 0 HID plugins
29.09.14 09:08:53,418
hidd[44]
Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
29.09.14 09:09:11,000
kernel[0]
VM Swap Subsystem is ON
29.09.14 09:09:11,000
kernel[0]
IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
29.09.14 09:09:11,000
kernel[0]
IO80211Interface::efiNVRAMPublished():
29.09.14 09:09:12,342
com.apple.SecurityServer[26]
Session 100000 created
29.09.14 09:09:17,027
com.apple.usbmuxd[18]
usbmuxd-344 on Jul 29 2014 at 13:52:57, running 64 bit
29.09.14 09:09:22,000
kernel[0]
Ethernet [AppleBCM5701Ethernet]: Link up on en0, 1-Gigabit, Full-duplex, No flow-control, Debug [796d,2301,0de1,0300,c1e1,3800]
29.09.14 09:09:26,367
stackshot[22]
Timed out waiting for IOKit to finish matching.
29.09.14 09:09:26,000
kernel[0]
AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
29.09.14 09:09:26,573
spindump[71]
CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
29.09.14 09:09:26,573
spindump[71]
Unable to register Stop Spinning port: 1011
29.09.14 09:09:26,574
spindump[71]
CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
29.09.14 09:09:27,177
configd[55]
dhcp_arp_router: en1 SSID unavailable
29.09.14 09:09:27,189
configd[55]
network changed.
29.09.14 09:09:27,189
configd[55]
setting hostname to "Richard-Muhler.local"
29.09.14 09:09:28,000
kernel[0]
flow_divert_kctl_disconnect (0): disconnecting group 1
29.09.14 09:09:32,529
com.apple.SecurityServer[26]
Entering service
29.09.14 09:09:32,619
awacsd[58]
Starting awacsd connectivity_executables-97.1 (Jul 27 2014 17:02:42)
29.09.14 09:09:32,623
awacsd[58]
InnerStore CopyAllZones: no info in Dynamic Store
29.09.14 09:09:32,643
UserEventAgent[11]
Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin
29.09.14 09:09:32,654
UserEventAgent[11]
Captive: CNPluginHandler en1: Inactive
29.09.14 09:09:32,657
digest-service[64]
label: default
29.09.14 09:09:32,658
digest-service[64]
dbname: od:/Local/Default
29.09.14 09:09:32,658
digest-service[64]
mkey_file: /var/db/krb5kdc/m-key
29.09.14 09:09:32,658
digest-service[64]
acl_file: /var/db/krb5kdc/kadmind.acl
29.09.14 09:09:32,660
digest-service[64]
digest-request: uid=0
29.09.14 09:09:32,675
mDNSResponder[36]
mDNSResponder mDNSResponder-522.92.1 (Jul 27 2014 17:31:49) starting OSXVers 13
29.09.14 09:09:32,000
kernel[0]
Sandbox: mDNSResponder(36) deny file-read-data /Library/Preferences/com.apple.security-common.plist
29.09.14 09:09:32,708
digest-service[64]
digest-request: netr probe 0
29.09.14 09:09:32,709
digest-service[64]
digest-request: init request
29.09.14 09:09:32,721
digest-service[64]
digest-request: init return domain: BUILTIN server: RICHARD-MUHLER indomain was: <NULL>
29.09.14 09:09:32,737
configd[55]
network changed.
29.09.14 09:09:32,740
configd[55]
network changed: DNS*
29.09.14 09:09:32,741
mDNSResponder[36]
D2D_IPC: Loaded
29.09.14 09:09:32,741
mDNSResponder[36]
D2DInitialize succeeded
29.09.14 09:09:32,743
mDNSResponder[36]
4: Listening for incoming Unix Domain Socket client requests
29.09.14 09:09:32,746
systemkeychain[87]
done file: /var/run/systemkeychaincheck.done
29.09.14 09:09:32,776
networkd[104]
networkd.104 built Aug 24 2013 22:08:46
29.09.14 09:09:33,089
airportd[62]
airportdProcessDLILEvent: en1 attached (up)
29.09.14 09:09:33,000
kernel[0]
createVirtIf(): ifRole = 1
29.09.14 09:09:33,000
kernel[0]
in func createVirtualInterface ifRole = 1
29.09.14 09:09:33,000
kernel[0]
AirPort_Brcm4331_P2PInterface::init name <p2p0> role 1
29.09.14 09:09:33,000
kernel[0]
AirPort_Brcm4331_P2PInterface::init() <p2p> role 1
29.09.14 09:09:33,000
kernel[0]
Created virtif 0xffffff8020d6b400 p2p0
29.09.14 09:09:33,350
locationd[41]
NBB-Could not get UDID for stable refill timing, falling back on random
29.09.14 09:09:33,808
locationd[41]
Location icon should now be in state 'Inactive'
29.09.14 09:09:33,821
aosnotifyd[61]
ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
29.09.14 09:09:33,865
mdmclient[37]
ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
29.09.14 09:09:33,932
apsd[60]
CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
29.09.14 09:09:38,337
sandboxd[107]
([62]) airportd(62) deny file-read-data /private/var/root/Library/Preferences/ByHost/.GlobalPreferences.A041C59B-5480-5 7C2-875E-9C156DC9D4C9.plist
29.09.14 09:09:44,006
apsd[60]
CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
29.09.14 09:09:47,632
awacsd[58]
Exiting
29.09.14 09:09:48,556
spindump[71]
CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
29.09.14 09:09:49,000
kernel[0]
hfs: mounted Recovery HD on device disk0s3
29.09.14 09:09:52,266
configd[55]
subnet_route: write routing socket failed, Network is unreachable
29.09.14 09:09:54,196
configd[55]
network changed: Proxy
29.09.14 09:10:10,177
fseventsd[45]
implementation_register_rpc: implementation_added_client() => 22
29.09.14 09:10:11,655
configd[55]
InterfaceNamer: timed out waiting for IOKit to quiesce
29.09.14 09:10:11,655
configd[55]
Busy services :
29.09.14 09:10:11,655
configd[55]
MacBookPro8,1 [2, 212828 ms]
29.09.14 09:10:11,655
configd[55]
MacBookPro8,1/AppleACPIPlatformExpert [7, 58245 ms]
29.09.14 09:10:11,655
configd[55]
MacBookPro8,1/AppleACPIPlatformExpert/CPU0@0 [1, 55411 ms]
29.09.14 09:10:11,655
configd[55]
MacBookPro8,1/AppleACPIPlatformExpert/CPU0@0/AppleACPICPU [1, 55172 ms]
29.09.14 09:10:11,655
configd[55]
MacBookPro8,1/AppleACPIPlatformExpert/PCI0@0 [1, 57881 ms]
29.09.14 09:10:11,655
configd[55]
MacBookPro8,1/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI [9, 57875 ms]
29.09.14 09:10:11,655
configd[55]
MacBookPro8,1/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/MCHC@0 [1, 55180 ms]
29.09.14 09:10:11,655
configd[55]
MacBookPro8,1/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/PEG1@1,1 [1, 57873 ms]
29.09.14 09:10:11,655
configd[55]
MacBookPro8,1/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/PEG1@1,1/IOPP [1, 57273 ms]
29.09.14 09:10:11,656
configd[55]
MacBookPro8,1/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/PEG1@1,1/IOPP/UPSB@0 [1, 57273 ms]
29.09.14 09:10:11,656
configd[55]
MacBookPro8,1/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/PEG1@1,1/IOPP/UPSB@0/ IOPP [1, 56667 ms]
29.09.14 09:10:11,656
configd[55]
MacBookPro8,1/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/PEG1@1,1/IOPP/UPSB@0/ IOPP/DSB0@0 [1, 56667 ms]
29.09.14 09:10:11,656
configd[55]
MacBookPro8,1/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/PEG1@1,1/IOPP/UPSB@0/ IOPP/DSB0@0/IOPP [1, 56650 ms]
29.09.14 09:10:11,656
configd[55]
MacBookPro8,1/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/PEG1@1,1/IOPP/UPSB@0/ IOPP/DSB0@0/IOPP/NHI0@0 [1, 56650 ms]
29.09.14 09:10:11,656
configd[55]
MacBookPro8,1/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/PEG1@1,1/IOPP/UPSB@0/ IOPP/DSB0@0/IOPP/NHI0@0/AppleThunderboltHAL [1, 56311 ms]
29.09.14 09:10:11,656
configd[55]
MacBookPro8,1/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/PEG1@1,1/IOPP/UPSB@0/ IOPP/DSB0@0/IOPP/NHI0@0/AppleThunderboltHAL/AppleThunderboltNHIType1 [1, 56311 ms]
29.09.14 09:10:11,656
configd[55]
MacBookPro8,1/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/PEG1@1,1/IOPP/UPSB@0/ IOPP/DSB0@0/IOPP/NHI0@0/AppleThunderboltHAL/AppleThunderboltNHIType1/IOThunderbo ltController [1, 56311 ms]
29.09.14 09:10:11,656
configd[55]
MacBookPro8,1/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/PEG1@1,1/IOPP/UPSB@0/ IOPP/DSB0@0/IOPP/NHI0@0/AppleThunderboltHAL/AppleThunderboltNHIType1/IOThunderbo ltController/IOThunderboltLocalNode [1, 55173 ms]
29.09.14 09:10:11,657
configd[55]
MacBookPro8,1/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/IGPU@2 [1, 55177 ms]
29.09.14 09:10:11,657
configd[55]
MacBookPro8,1/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/pci8086,1c3a@16 [1, 55177 ms]
29.09.14 09:10:11,657
configd[55]
MacBookPro8,1/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/EHC2@1A,7 [1, 57124 ms]
29.09.14 09:10:11,657
configd[55]
MacBookPro8,1/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/EHC2@1A,7/AppleUSBEHC I [1, 56602 ms]
29.09.14 09:10:11,657
configd[55]
MacBookPro8,1/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/EHC2@1A,7/AppleUSBEHC I/Bluetooth USB Host Controller@fa113000 [1, 55176 ms]
29.09.14 09:10:11,657
configd[55]
MacBookPro8,1/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/HDEF@1B [1, 55184 ms]
29.09.14 09:10:11,657
configd[55]
MacBookPro8,1/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/RP03@1C,2 [1, 56629 ms]
29.09.14 09:10:11,657
configd[55]
MacBookPro8,1/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/RP03@1C,2/IOPP [1, 56113 ms]
29.09.14 09:10:11,657
configd[55]
MacBookPro8,1/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/RP03@1C,2/IOPP/FRWR@0 [1, 56113 ms]
29.09.14 09:10:11,658
configd[55]
MacBookPro8,1/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/RP03@1C,2/IOPP/FRWR@0 /AppleFWOHCI [!registered, !matched, 1, 55552 ms]
29.09.14 09:10:11,658
configd[55]
MacBookPro8,1/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/RP03@1C,2/IOPP/FRWR@0 /AppleFWOHCI/IOFireWireController [1, 55552 ms]
29.09.14 09:10:11,658
configd[55]
MacBookPro8,1/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/RP03@1C,2/IOPP/FRWR@0 /AppleFWOHCI/IOFireWireController/IOFireWireLocalNode [1, 55552 ms]
29.09.14 09:10:11,658
configd[55]
MacBookPro8,1/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/LPCB@1F [1, 55183 ms]
29.09.14 09:10:11,658
configd[55]
MacBookPro8,1/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SBUS@1F,3 [1, 55184 ms]
29.09.14 09:10:11,658
configd[55]
MacBookPro8,1/AppleACPIPlatformExpert/SMC [1, 55177 ms]
29.09.14 09:10:11,658
configd[55]
MacBookPro8,1/AppleACPIPlatformExpert/SMS0 [1, 55177 ms]
29.09.14 09:10:11,658
configd[55]
MacBookPro8,1/AppleACPIPlatformExpert/ALS0 [1, 55177 ms]
29.09.14 09:10:11,658
configd[55]
MacBookPro8,1/AppleACPIPlatformExpert/GMUX [1, 55177 ms]
29.09.14 09:10:11,658
configd[55]
MacBookPro8,1/AppleACPIPlatformExpert/PNLF [1, 55177 ms]
29.09.14 09:10:11,659
configd[55]
MacBookPro8,1/IOResources [1, 57289 ms]
29.09.14 09:10:13,156
fseventsd[45]
log dir: /.fseventsd getting new uuid: 4D918F9C-D859-4503-908A-3E5829A68AB2
29.09.14 09:10:20,817
diskarbitrationd[51]
kextd [12]:15659 not responding.
29.09.14 09:10:22,503
configd[55]
network changed: v4(en0+:192.168.2.212) DNS+ Proxy+ SMB
29.09.14 09:10:22,000
kernel[0]
hfs: unmount initiated on Recovery HD on device disk0s3
29.09.14 09:10:23,445
warmd[17]
[warmctl_evt_timer_bc_activation_timeout:287] BC activation bcstop timer fired!
29.09.14 09:10:27,173
ntpd[120]
proto: precision = 1.000 usec
29.09.14 09:10:33,493
apsd[60]
Unrecognized leaf certificate
29.09.14 09:10:36,913
sandboxd[107]
DebugSymbols was unable to start a spotlight query: spotlight is not responding or disabled.
29.09.14 09:10:37,000
kernel[0]
SMC::smcHandleInterruptEvent WARNING status=0x0 (0x40 not set) notif=0x0
29.09.14 09:10:37,000
kernel[0]
SMC::smcReadKeyAction ERROR: smcReadData8 failed for key LsNM (kSMCKeyNotFound)
29.09.14 09:10:37,000
kernel[0]
SMC::smcReadKeyAction ERROR LsNM kSMCKeyNotFound(0x84) fKeyHashTable=0x0
29.09.14 09:10:37,000
kernel[0]
SMC::smcGetLightshowVers ERROR: smcReadKey LsNM failed (kSMCKeyNotFound)
29.09.14 09:10:37,000
kernel[0]
SMC::smcPublishLightshowVersion ERROR: smcGetLightshowVers failed (kSMCKeyNotFound)
29.09.14 09:10:37,000
kernel[0]
SMC::smcInitHelper ERROR: smcPublishLightshowVersion failed (kSMCKeyNotFound)
29.09.14 09:10:37,000
kernel[0]
Previous Shutdown Cause: 5
29.09.14 09:10:37,000
kernel[0]
SMC::smcInitHelper ERROR: MMIO regMap == NULL - fall back to old SMC mode
29.09.14 09:10:39,000
kernel[0]
en3: promiscuous mode enable succeeded
29.09.14 09:10:41,000
kernel[0]
IOBluetoothUSBDFU::probe
29.09.14 09:10:41,000
kernel[0]
IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0042
29.09.14 09:10:41,000
kernel[0]
**** [IOBluetoothHostControllerUSBTransport][start] -- completed -- result = TRUE -- 0xb400 ****
29.09.14 09:10:41,000
kernel[0]
**** [BroadcomBluetoothHostControllerUSBTransport][start] -- Completed -- 0xb400 ****
29.09.14 09:10:42,000
kernel[0]
fGPUIdleIntervalMS = 0
29.09.14 09:10:42,793
UserEventAgent[11]
assertion failed: 13F34: com.apple.telemetry + 17682 [AE0C3032-1747-317E-9871-E26B5B6B0120]: 0xffffffffe0000001
29.09.14 09:10:43,000
kernel[0]
init
29.09.14 09:10:43,000
kernel[0]
probe
29.09.14 09:10:43,000
kernel[0]
start
29.09.14 09:10:43,000
kernel[0]
DSMOS has arrived
29.09.14 09:10:43,000
kernel[0]
[IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification -- 0xb400
29.09.14 09:10:43,000
kernel[0]
[IOBluetoothHCIController][start] -- completed
29.09.14 09:10:43,128
loginwindow[39]
Login Window Application Started
29.09.14 09:10:43,000
kernel[0]
[IOBluetoothHCIController::setConfigState] calling registerService
29.09.14 09:10:43,000
kernel[0]
**** [IOBluetoothHCIController][protectedBluetoothHCIControllerTransportShowsUp] -- Connected to the transport successfully -- 0xcd40 -- 0xb000 -- 0xb400 ****
29.09.14 09:10:43,266
WindowServer[132]
Server is starting up
29.09.14 09:10:43,283
mds[35]
(Normal) FMW: FMW 0 0
29.09.14 09:10:44,000
kernel[0]
mTail has not been written to hardware: mTail = 0x00000000, hardare tail register = 0x00000040
29.09.14 09:10:44,370
WindowServer[132]
Session 256 retained (2 references)
29.09.14 09:10:44,371
WindowServer[132]
Session 256 released (1 references)
29.09.14 09:10:44,385
WindowServer[132]
Session 256 retained (2 references)
29.09.14 09:10:44,388
WindowServer[132]
init_page_flip: page flip mode is on
29.09.14 09:10:45,086
WindowServer[132]
Found 13 modes for display 0x00000000 [13, 0]
29.09.14 09:10:45,095
WindowServer[132]
Found 18 modes for display 0x00000000 [18, 0]
29.09.14 09:10:45,103
WindowServer[132]
Found 1 modes for display 0x00000000 [1, 0]
29.09.14 09:10:45,110
WindowServer[132]
Found 1 modes for display 0x00000000 [1, 0]
29.09.14 09:10:45,112
WindowServer[132]
mux_initialize: kAGCGetMuxState (kMuxControl, kMuxControl_switchingMode) failed (0xe0000John Galt
1. I have backed up my Mac on WD MyCloud, a small NAS with a Time Machine feature.
2. I have uninstalled Cocktail and cleared all settings reverting them to default.
3. I removed 30 entries for privacy reasons. If it's necessary i can PM you the full list.
# Host Database
# localhost is used to configure the loopback interface
# when the system is booting. Do not change this entry.
127.0.0.1 localhost
255.255.255.255 broadcasthost
::1 localhost
fe80::1%lo0 localhost
127.0.0.1 *removed*
127.0.0.1 *removed*
127.0.0.1 *removed*
Linc Davis
I restarted in safe mode and restarted again. I guess I have to wait now to see if this is fixed or should post the console output? -
Windows 8/8.1 slow boot (sudden onset)
Can anyone help with a slow boot problem on Windows 8/8.1, please? This concerns an Asus Zenbook. It's about 15 months old, and has always booted very quickly. Now, all of a sudden, it takes 5 minutes to get beyond the Windows logo screen.
I have tried all the standard things (clean boot, turn off Asus Fast Boot, etc), up to and including Resetting Windows. No good: on either Windows 8 or 8.1, it still takes 5 minutes. I have looked at the Windows System Log, and the delay occurs
right at the beginning of the Boot process. E.g., on the most recent boot I see as the first 3 entries (note, I'm in Europe, so dates are dd/mm/yyyy, and times are in 24-hour clock):
Information 10/03/2014 19:36:23 Kernel-General 12 None The operating system started at system time 2014-03-10T19:36:23.490074300Z.
Information 10/03/2014 19:36:23 Kernel-Boot 30 None The firmware reported boot metrics.
Information 10/03/2014 19:40:26 FilterManager 6 None File System Filter 'FileInfo' (6.3, 2013-08-22T11:38:45.000000000Z) has successfully loaded and registered with Filter Manager.
and you can see the 4-minute gap between the 2nd and 3rd entries. That's where the delay always comes, though sometimes the "reported boot metrics" doesn't show.
A little later in the procedure I do always get the following warning:
Warning 10/03/2014 19:40:31 Kernel-PnP 219 (212) The driver \Driver\WudfRd failed to load for the device ACPI\ACPI0008\2&daba3ff&2.
However because that comes later I can't see how it can be causing the problem, and I suspect it's an independent issue.
The machine appears to run normally once booted. It is protected against viruses by Windows Defender. I have looked at many posts on this and other fora on slow boot, and tried everything suggested, but none of the solutions have worked.
I have also looked widely on the web for problems with the File System Filter but nothing relevant comes up. The machine is under warranty, and could be sent back, but that would be a serious pain so if there is a solution I can implement I would much
prefer to do so. Thank you for looking at this.
There are no stupid rats, only misguided studentsHi Seglea,
I have exact the same issue as you have! The only difference is the time period the splash screen / logo screen with the dots spinning in a circle hangs / delays / freezes: exactly 120 seconds. You can set your watch to that delay. During these 120 seconds
nothing happens, no HDD LED activity, just nothing. Having passed the 120 s, the HDD LED begins to flicker and the logon screen is displayed 15 s later.
For the first look at it, I believe that it is a timeout problem. Usually Windows services retry to start after just these 120 seconds (e.g. Software Protection is configured this way, but in my case it does not start although configured as auto delayed).
I believe that the clue is to find out which service causes this delay.
My event logs are exactly the same as yours (without boot metrics), I do also have your WudRfd warning!
When started, the machine operates in a fast and stable way, as if nothing harmful had ever happened.
I do also have an SSD installed as only (system) disk.
In my case the startup screen of the BIOS also stays visible for more than 10 seconds, longer as on any other computer I have had before. I also had problems during installation of Windows 8.1. After the first reboot during OS installation the BIOS POST
screen restarted in an endless loop. I could solve that problem by setting the dedicated internal Graphics memory to less than 1024M, although I own 32 GBytes of RAM.
Nothing helped so far, I permuted my BIOS settings, even Fast Boot or Ultra Fast Boot did not help.
I have installed the latest drivers, I even tried to update the firmware of my SSD, but Intels toolbox told me, that my 3 years old 520 series SSD (never had seen any firmware updates before) was up-to date! Thus Windows 8.1 should handle with it. I also
did a quick analyzation with the tools, but everything was ok.
I just run chkdsk /r /f, as Zigzag proposed, but I had nearly the same problems as you have had:
Chkdsk got stuck at 10 % for 10 minutes then the machine rebooted with the 2 minutes delay and event logs do not show any Checkdisk entry.
In the Applications log, I noticed a igfxCUIService1.0.0.0 sourced entry as the first entry after reboot approximately 2 minutes after the end of the delay: The description of the event-ID "0" from the source "igfxCUIService1.0.0.0" could not be found. Event:
started/resumed which sounds ok. But it says that the component that caused this event, is not installed. (my translation from the German log)
The device manager shows that everything is fine and working well.
Here's my System constellation:
Gigabyte Z77X-UD3H, Intel Ivy Processor i7-3770 with 32 GBytes RAM, Intel 520 Series SSD via SATA 6G, BD Writer from LG via SATA 3G
BIOS F20e with UEFI and Secure Boot enabled (Windows 8.1 did install the GPT partitions):
Fast Boot enabled/disabled doesn't bother, Intel Virtualization Technoloy Enabled, VT-d enabled, OS Type Windows 8, Network Stack disabled, Secure Boot Mode standard, AHCI, USB 3.0 xHCI, Internal Graphics Size now 32M, (didn't bother up
to 512M, 1024M BIOS POST-screen endless loop), Intel Rapid Start Technology Enabled (disabled same effect) => I installed Windows 8.1 with "Intel SATA Preinstall driver For AHCI RAID Mode" in the F6 mode, as Intel recommended, Marvell ATA Controller
for eSATA (disabling same effect), ErP same effects on dis/enabled.
Windows 8.1 Pro German. Same effect when with or without LAN connected
I am thinking of Reinstalling Windows 8 with CSM mode without UEFI, but I believe that would not have any effect. Maybe I'll try another system disk for a reinstallation (HDD or other older SSD).
It would be nice if this problem could be solved by the community or by Microsoft, since I am not the only one!
Peter -
Win 7 slow boot - login in with fingerprint reader
Hi
I have a T400s (2.4 GHz and 4 GB) with an Intel SSD and WIn 7 RTM with latest Lenovo beta drivers.
I have the fingerprint reader activated for login and my boot time of 35 seconds is now split about half in the fingerprint login and half in the rest of the boot process.
Or described in another way if the machine is powered off and I swipe my finger to start the machine it takes about 17 seconds before the login prompt (the finger) is shown.
Then the machine shows "waiting" for 15-20 second during which my personal login icon flashes by before it completes the login and almost immediately shows the desktop.
I am surprised by the very slow login with my finger already swiped. It would be much faster to disable the fingerprint reader and log in using a password. Anyone encountered this problem and knows how to fix it?
Other problems with the boot I have found (and solved) is the use of a solid color as the Windows background which for some reason costs about 15 second in boot time!!? I also had to reflash the firmware of my SSD to gain an additional 10 seconds at the start of the boot process.
Mats
Thinkpad T400s, X61s, X41, 600Hi Mats,
I have a similar, if not, the same complaint. I have a T500 running Win 7, which was just upgraded from NT.
My complaint - and it goes under the topic of usabiltiy - is that it takes anywhere from a couple of seconds up to 20 seconds before a valid fingerprint scan is accepted. If it's a scan doesn't match, there's immediate feedback of an error. I wouldn't mind the delay so much if the was some immediate feedback. If I click the "other credentials" button, I can see that the machine is "validating". If I enter my password, boom, I'm immediately logged in.
This is annoying. Under NT, there was not such problem. Your post is from 1 1/2 years ago. It's surprising that no one else is complaining about this. I guess most just say "forget it - I'm just using my password." But I know the process works and works nicely. (I've run the ThinkVantage System Update as recently as Feb '11. So, the drivers are current.)
Hey, anyone from Lenovo listening?!!
Regards, Ed -
Hi,
I'm experiencing a really slow boot time after updating to 10.4.3.
This only effects my Dual 2.3 G5, the iMac G5 boots as normal.
It seems to hang for at least 2 minutes on the grey screen before completing the boot and launching the login window.
I booted in verbose mode <apple> V , to see where it seems to be hanging and this is what is on screen at the time:
Nov 23 16:07:04 localhost kernel[0]: IPv6 packet filtering initialized, default to accept, logging disabled
Nov 23 16:07:04 localhost kernel[0]: UniNEnet: Ethernet address 00:11:24:86:33:46
Then after almost 2 minutes it moves on with the rest:
Nov 23 16:07:05 localhost diskarbitrationd[33]: disk0s3 hfs 8EB46343-98A2-3545-835D-FEE52DE4DA60 Blanche /
Nov 23 16:07:06 localhost lookupd[58]: lookupd (version 365) starting - Wed Nov 23 16:07:06 2005
Nov 23 16:07:08 localhost kernel[0]: ATY,ChockStone_A: vram [a0000000:10000000]
Nov 23 16:07:08 localhost kernel[0]: ATY,ChockStone_B: vram [a0000000:10000000]
Nov 23 16:07:08 G5 kernel[0]: UniNEnet::monitorLinkStatus - Link is up at 100 Mbps - Full Duplex
Nov 23 16:07:08 G5 configd[31]: setting hostname to "G5.local"
Nov 23 16:07:09 G5 /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Nov 23 16:07:10 G5 loginwindow[64]: Login Window Started Security Agent
aped[61]: Not affecting system service user (uid 92). This is just an informative message. It is not causing your problem.
Nov 23 16:07:11 G5 launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[58]: exited abnormally: Hangup
Nov 23 16:07:11 G5 configd[31]: executing /System/Library/SystemConfiguration/Kicker.bundle/Contents/Resources/enable-net work
Nov 23 16:07:11 G5 configd[31]: posting notification com.apple.system.config.network_change
Nov 23 16:07:11 G5 configd[31]: setting hostname to "G5"
Nov 23 16:07:11 G5 lookupd[74]: lookupd (version 365) starting - Wed Nov 23 16:07:11 2005
aped[61]: Not affecting super-user process ifcstart[130]. This is just an informative message. It is not causing your problem.
Nov 23 16:07:12 G5 configd[31]: target=enable-network: disabled
aped[61]: Not affecting super-user process ioxdeviced[199]. This is just an informative message. It is not causing your problem.
Nov 23 16:07:13 G5 mDNSResponder: Adding browse domain local.
aped[61]: Not affecting super-user process mcxd[67]. This is just an informative message. It is not causing your problem.
Nov 23 17:51:46 G5 KernelEventAgent[41]: tid 00000000 received unknown event (12)
aped[61]: Not affecting super-user process coreaudiod[32]. This is just an informative message. It is not causing your problem.
I have no idea what any of this means or what is causing the delay in booting.
Any clues?
G5 Dual 2.3 /G5 iMac 20 Mac OS X (10.4.3)Hi,
I have the same problem. My iMac also hangs for about one minute at the same place;
"Nov 23 16:07:04 localhost kernel[0]: IPv6 packet filtering initialized, default to accept, logging disabled
Nov 23 16:07:04 localhost kernel[0]: UniNEnet: Ethernet address 00:11:24:86:33:46"
but with a different MAC address ofcourse.
I 've run the maintenance scripts and repaired permissions using Onyx but it did no difference.
Any other ideas?
iMac DV/450 -
10.8.4 slow boot & launch deamons/agents [not loaded]
Hi,
I'm experiencing problems with my 10.8.4,
slow boot up, slow open apps...
Here below some infos... pls could you help me in some way?
Does it normal that all those deamons/agents are [not loaded]?
Thanks so much in advance.
jo
Hardware Information:
MacBook Pro (15-inch, Mid 2010)
MacBook Pro - model: MacBookPro6,2
1 2.4 GHz Intel Core i5 CPU: 2 cores
4 GB RAM
Video Information:
Intel HD Graphics - VRAM: 288 MB
NVIDIA GeForce GT 330M - VRAM: 256 MB
System Software:
OS X 10.8.4 (12E55) - Uptime: 0 days 0:14:49
Disk Information:
Hitachi HTS545032B9SA02 disk0 : (320,07 GB)
disk0s1 (disk0s1) <not mounted>: 209,7 MB
JPA10 ML (disk0s2) /: 319,73 GB (204,23 GB free)
MATSHITADVD-R UJ-898
USB Information:
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Internal Memory Card Reader
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Apple Inc. Built-in iSight
FireWire Information:
Thunderbolt Information:
Kernel Extensions:
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[not loaded] com.adobe.fpsaud.plist
[not loaded] com.adobe.SwitchBoard.plist
[not loaded] com.bjango.istatlocaldaemon.plist
[not loaded] com.google.keystone.daemon.plist
[not loaded] com.maintain.CocktailScheduler.plist
[not loaded] com.microsoft.office.licensing.helper.plist
[not loaded] com.quark.quarkupdate.plist
[not loaded] com.radiosilenceapp.nke.plist
[not loaded] com.teamviewer.teamviewer_service.plist
Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist
[not loaded] com.bjango.istatlocal.plist
[not loaded] com.google.keystone.agent.plist
[not loaded] com.Logitech.Control Center.Daemon.plist
[not loaded] com.maintain.LogOut.plist
[not loaded] com.maintain.PurgeInactiveMemory.plist
[not loaded] com.maintain.Restart.plist
[not loaded] com.maintain.ShutDown.plist
[not loaded] com.maintain.Sleep.plist
[not loaded] com.maintain.SystemEvents.plist
[not loaded] com.quark.quarkupdate.agent.plist
[not loaded] com.radiosilenceapp.agent.plist
[not loaded] com.teamviewer.teamviewer.plist
[not loaded] com.teamviewer.teamviewer_desktop.plist
User Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist
[not loaded] com.adobe.ARM.de23d1e3aa2d00ce38d73f10fcbdc8dcaaaf6be989610710a1ddda77.plist
[not loaded] nhoj.DatesToiCal.plist
[not loaded] uk.co.markallan.clamxav.clamscan.plist
[not loaded] uk.co.markallan.clamxav.freshclam.plist
User Login Items:
Quicksilver
Bartender
iTunesHelper
3rd Party Preference Panes:
Flash Player
Logitech Control Center
Quark Update Preferences
Internet Plug-ins:
AdobeAAMDetect.plugin
AdobeExManDetect.plugin
AdobePDFViewer.plugin
AdobePDFViewerNPAPI.plugin
Flash Player.plugin
FlashPlayer-10.6.plugin
googletalkbrowserplugin.plugin
iPhotoPhotocast.plugin
JavaAppletPlugin.plugin
npgtpo3dautoplugin.plugin
o1dbrowserplugin.plugin
QuickTime Plugin.plugin
SharePointBrowserPlugin.plugin
Silverlight.plugin
User Internet Plug-ins:
Bad Fonts:
None
Top Processes by CPU:
4% Console
3% WindowServer
2% WebProcess
1% EtreCheck
1% fontd
1% iStatLocalDaemon
1% Wunderlist
1% ps
0% SystemUIServer
0% Bartender
Top Processes by Memory:
283 MB WebProcess
172 MB Wunderlist
147 MB Safari
94 MB CalendarAgent
90 MB WindowServer
86 MB mds
78 MB Quicksilver
70 MB TextWrangler
66 MB com.apple.dock.extra
66 MB SystemUIServer
Virtual Memory Statistics
1.12 GB Free RAM
1.84 GB Active RAM
187 MB Inactive RAM
749 MB Wired RAM
298 MB Page-ins
0 B Page-outs"AppCleaner" is just as useless as "Cocktail," or perhaps worse.
Any third-party software that doesn't install by drag-and-drop into the Applications folder, and uninstall by drag-and-drop to the Trash, is a system modification.
Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
Here are some general guidelines. Suppose you want to remove something called “BrickYourMac.” First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickyourmac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, contact the developer. While you're waiting for a response, download BrickYourMac.dmg and open it. There may be an application in there such as “Uninstall BrickYourMac.” If not, open “BrickYourMac.pkg” and look for an Uninstall button.
You may have to log out or reboot in order to complete an uninstallation.
If you can’t remove software in any other way, you’ll have to erase your boot volume and perform a clean reinstallation of OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" that purport to remove software. -
[solved] dhcpcd seriously slowing boot time, how to fix?
As the title says, dhcpcd is really the limiting factor in my boot process. Of the 4.125 seconds spent doing userland boot stuff, 2.95 are spent waiting for dhcpcd to finish loading so the network.target is reached and the last few things can continue loading. It might seem petty to complain about an 8 second boot, but I'm just trying to get it as quick as possible. What can I do to make it go faster? I've read through the wiki on improving boot times, dhcpcd, etc. and haven't found anything that has helped significantly. This is on a permanent ethernet connection, by the way.
Last edited by davidjosepha (2015-06-01 21:02:29)roy@uberpc ~ $ sudo dhcpcd -k
sending signal ARLM to pid 3015
waiting for pid 3015 to exit
roy@uberpc ~ $ time sudo dhcpcd
dev: loaded udev
enp3s0: adding address fe80::8d30:2b85:75ba:2d40
wlp4s0: adding address fe80::893f:45de:2864:e33f
DUID 00:01:00:01:1b:79:14:0c:e8:94:f6:3f:9b:95
wlp4s0: IAID f6:3f:9b:95
enp3s0: waiting for carrier
wlp4s0: soliciting a DHCP lease
wlp4s0: offered 10.73.2.30 from 10.73.1.1 `uberserver.marples.name'
wlp4s0: soliciting an IPv6 router
wlp4s0: leased 10.73.2.30 for 3600 seconds
wlp4s0: router 10.73.1.1 requires a host route
wlp4s0: adding route to 10.73.2.0/24
wlp4s0: adding host route to 10.73.1.1
wlp4s0: adding default route via 10.73.1.1
ntpd | * Stopping ntpd ... [ ok ]
ntpd | * Starting ntpd ... [ ok ]
forked to background, child pid 3276
real 0m5.083s
user 0m0.031s
sys 0m0.009s
So, with ARP checking it's just over 5 seconds, which is about right.
roy@uberpc ~ $ sudo dhcpcd -k
sending signal ARLM to pid 3276
waiting for pid 3276 to exit
roy@uberpc ~ $ time sudo dhcpcd -A
dev: loaded udev
enp3s0: adding address fe80::8d30:2b85:75ba:2d40
wlp4s0: adding address fe80::893f:45de:2864:e33f
DUID 00:01:00:01:1b:79:14:0c:e8:94:f6:3f:9b:95
wlp4s0: IAID f6:3f:9b:95
enp3s0: waiting for carrier
wlp4s0: soliciting a DHCP lease
wlp4s0: offered 10.73.2.30 from 10.73.1.1 `uberserver.marples.name'
wlp4s0: leased 10.73.2.30 for 3600 seconds
wlp4s0: router 10.73.1.1 requires a host route
wlp4s0: adding route to 10.73.2.0/24
wlp4s0: adding host route to 10.73.1.1
wlp4s0: adding default route via 10.73.1.1
ntpd | * Stopping ntpd ... [ ok ]
ntpd | * Starting ntpd ... [ ok ]
forked to background, child pid 3537
real 0m0.170s
user 0m0.030s
sys 0m0.010s
roy@uberpc ~ $
Without ARP, it's under 200 milliseconds. This was a lucky run due to RFC mandated randomised startup delays (this is noted when you add --debug, I omitted this otherwise this post would be quite huge with other debug info)
But wait, we can go faster yet by ignoring these RFC mandated delays.
roy@uberpc ~/src/dhcpcd $ sudo dhcpcd -k
sending signal ARLM to pid 5994
waiting for pid 5994 to exit
roy@uberpc ~/src/dhcpcd $ time sudo dhcpcd -A --nodelay
dev: loaded udev
DUID 00:01:00:01:1b:79:14:0c:e8:94:f6:3f:9b:95
wlp4s0: IAID f6:3f:9b:95
wlp4s0: soliciting an IPv6 router
wlp4s0: soliciting a DHCP lease
enp3s0: waiting for carrier
wlp4s0: offered 10.73.2.30 from 10.73.1.1 `uberserver.marples.name'
wlp4s0: leased 10.73.2.30 for 3600 seconds
wlp4s0: router 10.73.1.1 requires a host route
wlp4s0: adding route to 10.73.2.0/24
wlp4s0: adding host route to 10.73.1.1
wlp4s0: adding default route via 10.73.1.1
ntpd | * Stopping ntpd ... [ ok ]
ntpd | * Starting ntpd ... [ ok ]
forked to background, child pid 6272
real 0m0.126s
user 0m0.028s
sys 0m0.013s
roy@uberpc ~/src/dhcpcd $
I'm sure we can get under 100ms here!
Let's strip the NTP options to avoid restarting that.
roy@uberpc ~/src/dhcpcd $ sudo dhcpcd -k
sending signal ARLM to pid 6653
waiting for pid 6653 to exit
roy@uberpc ~/src/dhcpcd $ time sudo dhcpcd -A --nodelay -O ntp_servers
dev: loaded udev
DUID 00:01:00:01:1b:79:14:0c:e8:94:f6:3f:9b:95
wlp4s0: IAID f6:3f:9b:95
wlp4s0: soliciting an IPv6 router
wlp4s0: soliciting a DHCP lease
enp3s0: waiting for carrier
wlp4s0: offered 10.73.2.30 from 10.73.1.1 `uberserver.marples.name'
wlp4s0: leased 10.73.2.30 for 3600 seconds
wlp4s0: router 10.73.1.1 requires a host route
wlp4s0: adding route to 10.73.2.0/24
wlp4s0: adding host route to 10.73.1.1
wlp4s0: adding default route via 10.73.1.1
forked to background, child pid 6815
real 0m0.068s
user 0m0.019s
sys 0m0.007s
roy@uberpc ~/src/dhcpcd $
Lets go nuts and not bother running any scripts.
After all, DNS from DHCP is optional - a good local resolver will try DNS ROOT servers by default.
But screw fast DNS lookups, we want a fast boot!
roy@uberpc ~/src/dhcpcd $ sudo dhcpcd -k
sending signal ARLM to pid 7025
waiting for pid 7025 to exit
roy@uberpc ~/src/dhcpcd $ time sudo dhcpcd -A --nodelay -O ntp_servers -c /dev/null
dev: loaded udev
DUID 00:01:00:01:1b:79:14:0c:e8:94:f6:3f:9b:95
wlp4s0: IAID f6:3f:9b:95
wlp4s0: soliciting an IPv6 router
wlp4s0: soliciting a DHCP lease
enp3s0: waiting for carrier
wlp4s0: offered 10.73.2.30 from 10.73.1.1 `uberserver.marples.name'
wlp4s0: leased 10.73.2.30 for 3600 seconds
wlp4s0: router 10.73.1.1 requires a host route
wlp4s0: adding route to 10.73.2.0/24
wlp4s0: adding host route to 10.73.1.1
wlp4s0: adding default route via 10.73.1.1
forked to background, child pid 7030
real 0m0.024s
user 0m0.001s
sys 0m0.002s
roy@uberpc ~/src/dhcpcd $
palm, meet face! I was stupidly releasing the lease between runs. lets just clear the IP from the network stack to instead.
After all, we are rebinding to the same network each boot.
oy@uberpc ~/src/dhcpcd $ sudo dhcpcd -x
sending signal TERM to pid 7900
waiting for pid 7900 to exit
roy@uberpc ~/src/dhcpcd $ sudo ip a d 10.73.2.30/24 dev wlp4s0
roy@uberpc ~/src/dhcpcd $ time sudo dhcpcd -4A --nodelay -O ntp_servers -c /dev/null --nodev
DUID 00:01:00:01:1b:79:14:0c:e8:94:f6:3f:9b:95
wlp4s0: IAID f6:3f:9b:95
wlp4s0: rebinding lease of 10.73.2.30
enp3s0: waiting for carrier
wlp4s0: leased 10.73.2.30 for 3600 seconds
wlp4s0: router 10.73.1.1 requires a host route
wlp4s0: adding route to 10.73.2.0/24
wlp4s0: adding host route to 10.73.1.1
wlp4s0: adding default route via 10.73.1.1
forked to background, child pid 7992
real 0m0.015s
user 0m0.002s
sys 0m0.000s
roy@uberpc ~/src/dhcpcd $
There are other ways of making dhcpcd go faster, but that involves hacking the code NOT to query the kernel for any existing IP addresses or routes so we don't break networking needlessly even for a every small window and other such things.
So at 15ms I think dhcpcd is pretty fast, and this is just profilng via the time shell command.
Of course, dhcpcd by default provides the most RFC compliant way of autoconfiguring your network address.
But of course, I leave the best trick until last. A well configured system with well written programs shouldn't need to forceably wait for the initial DHCP run to finish.
roy@uberpc ~/src/dhcpcd $ sudo dhcpcd -k
sending signal ARLM to pid 7992
waiting for pid 7992 to exit
roy@uberpc ~/src/dhcpcd $ time sudo dhcpcd -b
dev: loaded udev
forked to background, child pid 8217
real 0m0.004s
user 0m0.001s
sys 0m0.002s
If you still believe dhcpcd to be slow, add the debug option and post some logs, ideally with timestamps and then we'll talk about making it go faster to meet your needs. -
Slow boot/startup MBP after Mavericks upgrade
Hi Macbook Pro users out there!
Since upgrading my MBP Mid 2009 from Mountain Lion to Mavericks, a simple system restart takes about 3-5 minutes, compared to about 15-30 seconds before the upgrade. Most of the booting time ist consumed after entering my password.
Some more technical details:
* MBP equipped with SSD and 3.01 GHz Intel Core Duo
* I did a "clean" install from an Mavericks image and used a time machine backup to reinstall apps & docs
* I switched ON file-vault
* volume check shows no errors; access rights check shows a lot of issues, but they cannot seem to be repaired (tried this several times!)
* only few background processes running and no active applications
Does anyone of you have a hint or advice for me, how to speed up the system-boot process? Everything worked perfectly with Mountain Lion. Is anybody experiencing similar problems? What exactly happens after entry of the password, besides loading of active apps and processes? Is there a way to find out, which part of the boot process takes so long?
Thank you for your help in advance!I have a new Macbook Pro 15 Retina, and since installing Bootcamp I have a 3 minute boot time before my password. Bootcamp installation was quite a chore, so I am not wild about wiping out the machine for a clean install, especially if this is a product of Mavericks (I would get the same result). The original clean machine booted in 20 to 30 seconds...just a bit longer than my 2010 MB Pro with Snow Leopard and Bootcamp. I assume there is a diagnostic tool to figure out what is slowing the boot, but I have not found it yet.
-
Slow boot after updating to 10.7.2
Hi there,
Since updating from SL to Lion, I have noticed a slower boot up than usual, but now even more so since updating to 10.7.2. Furthermore once it is at the login screen, it fails to find the bluetooth magic mouse meaning I have to switch it off and on for it to be recognized. Once the mouse connects, there are no further issues with bluetooth.
Is there a way for me to check what is being used during startup, or some way to edit the startup process?
Mac is a 24" 2008 model, Core 2 Extreme with 4GB RAM.Hello:
I don't know about the "slow," but try this for the mouse problem:
Trash a preference file (com.apple.bluetooth.plist) and restart.
Reset the PRAM and SMC
Make the mouse a favorite
Barry -
Yosemite slow boot .... most of the time
I use EtreCheck to see what's running on my system.
One such check showed this:
A little research showed that Warmd 'controls caches used during startup and login. It is a launch daemon started by launchd during boot and is not mean to be invoked directly.'
Besides this single occurrence, I have not been able to see warmd creating a problem since. (and I run EntreCheck after any slow startup)
Additionally, my 'slow startup' happens irregularly. About 95% of the time. Isn't that weird?!
Most of the time my system (defined below) just hangs at the progress bar for about 1.25 minutes. Then starts.
Apple, what is your take on this?
=================================================
EtreCheck version: 2.0.6 (91)
Report generated October 23, 2014 at 12:35:00 PM PDT
Hardware Information: ℹ️
iMac (27-inch, Late 2012) (Verified)
iMac - model: iMac13,2
1 3.4 GHz Intel Core i7 CPU: 4-core
16 GB RAM Upgradeable
BANK 0/DIMM0
8 GB DDR3 1600 MHz ok
BANK 1/DIMM0
8 GB DDR3 1600 MHz ok
BANK 0/DIMM1
empty empty empty empty
BANK 1/DIMM1
empty empty empty empty
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce GTX 680MX - VRAM: 2048 MB
iMac 1600 x 900
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: 0:2:52
Disk Information: ℹ️
APPLE HDD ST3000DM001 disk1 : (3 TB)
S.M.A.R.T. Status: Verified
EFI (disk1s1) <not mounted> : 210 MB
Recovery HD (disk1s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk2) / [Startup]: 3 TB (3 TB free)
Core Storage: disk0s2 120.99 GB Online
Core Storage: disk1s2 3 TB Online
APPLE SSD SM128E disk0 : (121.33 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Boot OS X (disk0s3) <not mounted> : 134 MB
Macintosh HD (disk2) / [Startup]: 3 TB (3 TB free)
Core Storage: disk0s2 120.99 GB Online
Core Storage: disk1s2 3 TB Online
USB Information: ℹ️
Logitech USB-PS/2 Optical Mouse
Apple Inc. FaceTime HD Camera (Built-in)
HP Photosmart 7520 series
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Library/Application Support/Roxio
[not loaded] com.roxio.TDIXController (1.6) Support
/Library/Extensions
[not loaded] foo.tun (1.0) Support
Launch Agents: ℹ️
[loaded] com.oracle.java.Java-Updater.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
User Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist Support
User Login Items: ℹ️
None
Internet Plug-ins: ℹ️
JavaPlugin2_NPAPI: Version: 15.0.0 - SDK 10.7
Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
AdobePDFViewer: Version: 9.5.2 Support
Unity Web Player: Version: UnityPlayer version 4.3.7f1 - SDK 10.6 Support
googletalkbrowserplugin: Version: 5.4.2.18903 Support
iPhotoPhotocast: Version: 7.0
DYMO Safari Addin: Version: (null) - SDK 10.4 Support
QuickTime Plugin: Version: 7.7.3
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
GarminGpsControl: Version: 2.8.2.0 Release Support
nplastpass: Version: 2.0.15 Support
npgtpo3dautoplugin: Version: 0.1.44.29 - SDK 10.5 Support
NP2020Player: Version: 4.5.2.0 Support
CouponPrinter-FireFox: Version: Version 1.1.2
Silverlight: Version: 5.1.20913.0 - SDK 10.6 Support
Google Earth Web Plug-in: Version: 6.0 Support
DYMO NPAPI Addin: Version: 1.0 - SDK 10.4 Support
Default Browser: Version: 600 - SDK 10.10
o1dbrowserplugin: Version: 5.4.2.18903 Support
SharePointBrowserPlugin: Version: 14.4.4 - SDK 10.6 Support
JavaAppletPlugin: Version: Java 8 Update 25 Check version
OfficeLiveBrowserPlugin: Version: 12.2.9 Support
User Internet Plug-ins: ℹ️
nprevweb: Version: 1.0 Support
BSVersion: Version: 1.0.0.7 Support
tossc plugin_x86_64: Version: TOS Sharing Center plugin_x86_64 1.0.0.0 - SDK 10.7 Support
WebEx64: Version: 1.0 - SDK 10.5 Support
thinkorswim plugin_x86_64: Version: thinkorswim_x86_64 1.0.0.0 - SDK 10.7 Support
WebEx: Version: 1.0 Support
Picasa: Version: 1.0 Support
Google Earth Web Plug-in: Version: 7.1 Support
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 Support
BSContact: Version: 7.220 Support
Safari Extensions: ℹ️
Button Bar
GmailThis (Disabled)
Add To Amazon Wish List
LastPass
Reload Button
Licorize
YoutubeWide (Disabled)
Ookong- Amazon price history & more
AdBlock
Awesome Screenshot
3rd Party Preference Panes: ℹ️
3ivx MPEG-4 Support
Flash Player Support
Java Support
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: YES
Volumes being backed up:
Destinations:
TimeCapsule [Network]
Total size: 2 TB
Total number of backups: 114
Oldest backup: 2013-02-07 15:40:13 +0000
Last backup: 2014-10-23 16:59:36 +0000
Size of backup disk: Excellent
Backup size 2 TB > (Disk size 0 B X 3)
Top Processes by CPU: ℹ️
4% mds
3% WindowServer
1% fontd
0% ocspd
0% AppleSpell
Top Processes by Memory: ℹ️
69 MB mds_stores
52 MB Dock
52 MB Finder
34 MB mds
34 MB Spotlight
Virtual Memory Information: ℹ️
14.59 GB Free RAM
1.05 GB Active RAM
396 MB Inactive RAM
1.14 GB Wired RAM
713 MB Page-ins
0 B Page-outsMy computer is very slow to boot since I updated the OS.
How could I fix those start up problems?
"Aladdin: Path: /Library/StartupItems/Aladdin
AMPAgentBootup: Path: /Library/StartupItems/AMPAgentBootup
Startup items are obsolete in OS X Yosemite"
Problem description:
Slow boot
EtreCheck version: 2.1.2 (105)
Report generated December 13, 2014 at 11:10:43 AM EST
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2012) (Verified)
MacBook Pro - model: MacBookPro9,2
1 2.9 GHz Intel Core i7 CPU: 2-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1600 MHz ok
BANK 1/DIMM0
4 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 4000 -
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 0:10:19
Disk Information: ℹ️
APPLE HDD HTS541010A9E662 disk0 : (1 TB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 998.97 GB (653.40 GB free)
Core Storage: disk0s2 999.35 GB Online
HL-DT-ST DVDRW GS31N
USB Information: ℹ️
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. FaceTime HD Camera (Built-in)
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[loaded] com.epson.driver.EPSONProjectorUDAudio (1.30 - SDK 10.4) [Support]
Startup Items: ℹ️
Aladdin: Path: /Library/StartupItems/Aladdin
AMPAgentBootup: Path: /Library/StartupItems/AMPAgentBootup
Startup items are obsolete in OS X Yosemite
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Support]
[loaded] com.citrix.AuthManager_Mac.plist [Support]
[running] com.citrix.ReceiverHelper.plist [Support]
[running] com.citrix.ServiceRecords.plist [Support]
[loaded] com.google.keystone.agent.plist [Support]
[invalid?] com.kace.AdminAlert.plist [Support]
[running] com.kace.KSWMeterSvc.plist [Support]
[invalid?] com.oracle.java.Java-Updater.plist [Support]
[loaded] org.macosforge.xquartz.startx.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[invalid?] com.adobe.SwitchBoard.plist [Support]
[loaded] com.google.keystone.daemon.plist [Support]
[running] com.kace.ampagent.plist [Support]
[running] com.mcafee.agent.cma.plist [Support]
[not loaded] com.microsoft.office.licensing.helper.plist [Support]
[invalid?] com.oracle.java.Helper-Tool.plist [Support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Support]
[loaded] org.macosforge.xquartz.privileged_startx.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist [Support]
[loaded] com.adobe.ARM.[...].plist [Support]
[loaded] com.adobe.ARM.[...].plist [Support]
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Citations Application (/Applications/Papers.app/Contents/SharedSupport/Citations.app)
Dropbox Application (/Applications/Dropbox.app)
Internet Plug-ins: ℹ️
MeetingJoinPlugin: Version: Unknown - SDK 10.6 [Support]
o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
Default Browser: Version: 600 - SDK 10.10
AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 [Support]
Flip4Mac WMV Plugin: Version: 3.2.0.16 - SDK 10.8 [Support]
VLC Plugin: Version: 1.0.5 [Support]
AdobeAAMDetect: Version: AdobeAAMDetect 1.0.0.0 - SDK 10.6 [Support]
AdobePDFViewerNPAPI: Version: 11.0.07 - SDK 10.6 [Support]
FlashPlayer-10.6: Version: 15.0.0.246 - SDK 10.6 [Support]
Silverlight: Version: 5.1.30317.0 - SDK 10.6 [Support]
Flash Player: Version: 15.0.0.246 - SDK 10.6 Mismatch! Adobe recommends 16.0.0.235
QuickTime Plugin: Version: 7.7.3
CitrixICAClientPlugIn: Version: 11.8.2 - SDK 10.7 [Support]
googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
AdobePDFViewer: Version: 11.0.07 - SDK 10.6 [Support]
SharePointBrowserPlugin: Version: 14.4.5 - SDK 10.6 [Support]
DirectorShockwave: Version: 12.1.1r151 - SDK 10.6 [Support]
User internet Plug-ins: ℹ️
Picasa: Version: 1.0 - SDK 10.4 [Support]
3rd Party Preference Panes: ℹ️
Flash Player [Support]
Flip4Mac WMV [Support]
FUSE for OS X (OSXFUSE) [Support]
Perian [Support]
Time Machine: ℹ️
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 998.97 GB Disk used: 345.58 GB
Destinations:
Flavia Barros [Local]
Total size: 999.83 GB
Total number of backups: 27
Oldest backup: 2013-09-25 13:12:15 +0000
Last backup: 2014-12-13 04:10:23 +0000
Size of backup disk: Too small
Backup size 999.83 GB < (Disk used 345.58 GB X 3)
Flavia II [Local]
Total size: 2.00 TB
Total number of backups: 7
Oldest backup: 2014-10-16 20:23:40 +0000
Last backup: 2014-12-10 21:31:27 +0000
Size of backup disk: Adequate
Backup size 2.00 TB > (Disk used 345.58 GB X 3)
Top Processes by CPU: ℹ️
8% Google Chrome
7% WindowServer
3% mds
1% hidd
1% coreaudiod
Top Processes by Memory: ℹ️
180 MB Google Chrome
141 MB Google Chrome Helper
86 MB mds_stores
86 MB ocspd
77 MB Dropbox
Virtual Memory Information: ℹ️
4.53 GB Free RAM
2.57 GB Active RAM
596 MB Inactive RAM
889 MB Wired RAM
1.48 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Dec 13, 2014, 11:01:00 AM Self test - passed
Dec 11, 2014, 08:07:19 AM Microsoft Excel_2014-12-11-080719_Flavias-MacBook-Pro.cpu_resource.diag [Details]
Maybe you are looking for
-
If my iPod Touch 5 battery is failing, can I pay Apple to send me a refurbished one before I send them the one with a failing battery? I don't want to go without my ITouch. I really don't want to go without it but I dont want to have to purchase a n
-
would u please tell me some answers to my questions 1) what is the purpose of new gl account in ECC 6.0 2) what is the purpose of document splitting? 3) can u generate balancesheet report in fi using report painter? if it generate plz give me so
-
Logic crashing and quitting constantly
And pretty much as soon as its launched. repaired permissions(but there are a small number that dont seem to repair). trashed permissions Can the program logic get corrupted? Anyway, any helpfull suggestions appreciated
-
I have downloader Adobe Reader 8.1.2-Dansk, but when I will install it I get this message: Fundet program( AC76BA86-7AD7-1030-7B44-A8100000000) Kommandolinie: UPGR..., and the program interrops. I have ben in the REGEDIT and deletet alle about Adobe
-
HRMS Payroll: Migrating Element Links between Environments/Instances
Hi, I need to migrate element links between environments i.e, I need to move my element links from one instance to another. Apart from doing this manually or using dataloader, what are the other options/best practices that I can look at? Regards, San