Slow broadband after line repair
FAQ
<script type="text/javascript"></script> Test1 comprises of Best Effort Test: -provides background information.
Download Speed
71 Kbps
0 Kbps
250 Kbps
Max Achievable Speed
Download speedachieved during the test was - 71 Kbps
For your connection, the acceptable range of speeds is 50-250 Kbps.
Additional Information:
Your DSL Connection Rate :4576 Kbps(DOWN-STREAM), 448 Kbps(UP-STREAM)
IP Profile for your line is - 135 Kbps
If you wish to discuss these results please contact your ISP.
If you are experiencing problems with specific applications, servers or websites please contact your ISP for assistance.
Your test has completed please close this window to exit the performance tester.
Please visit FAQ section if you are unable To understand the test results.
Ok so My line had problems and was fixed, over 24 hours ago but my profile is still limited at 135mb. The BT guys in India are worse thean useless and there seems to be no way of talking to someone who actually understand IP config limits and can re baseline this profile. The wait another 24 hours each time you talk to anyone at BT wears very thin.
Any suggestuions?
has your router managed to hold your connection without disconnections since the engineer visit?
If so and you profile has not increased by tomorrow then I would email the mods for assistance giving your account and phone number and a link back to this thread [email protected]
I think your profile may wll be stuck and need a 'kick' into action
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.
Similar Messages
-
Slow Broadband after line fault fixed
Hi,
After a fault was fixed on the line two weeks ago Broadband speed has been incredibly slow - 32kBs at the most (previously it was around 400kBs)
After replacing the microfilter, resetting the router, plugging directly into the test socket I just left it alone but have seen no improvement.
Tried the quiet line test and all seems fine.
Looks like the router disconnected at least once, otherwise the connection time should be longer
Stats today...
Line state:
Connected
Connection time:
3 days, 22:43:33
Downstream:
287.1 Kbps
Upstream:
1.088 Mbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.5 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
10.9 dB / 4.9 dB
Line attenuation (Down/Up):
44.2 dB / 28.1 dB
Output power (Down/Up):
17.6 dBm / 12.7 dBm
FEC Events (Down/Up):
134945 / 6918
CRC Events (Down/Up):
0 / 341
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
0 / 246
Error Seconds (Local/Remote):
0 / 211
Any suggestions would be appreciated
Also I saved the stats from the 29th Sept, the day after the line was fixed if they are any use, much the same except Noise Margin was 14.9 dB / 10.6 dB
Solved!
Go to Solution.Hi,
Yesterday mods replied that there was indeed still a fault (didn't specify what) and they were looking into it.
This morning broadband was back and faster than ever
Thanks to all involved
My current stats, in case anyone's interested...
Line state:
Connected
Connection time:
0 days, 13:14:59
Downstream:
5.615 Mbps
Upstream:
1.04 Mbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.5 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
9.6 dB / 5.7 dB
Line attenuation (Down/Up):
44.2 dB / 28.1 dB
Output power (Down/Up):
19.8 dBm / 12.7 dBm
FEC Events (Down/Up):
379372 / 686
CRC Events (Down/Up):
471 / 60
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
6422 / 41
Error Seconds (Local/Remote):
277 / 169 -
Slow Broadband after line fault
Hi,
I really hope i can some advice on here! I've been connected for over 18 months - never had a problem, brilliant BB speed (for my area) and was a happy customer. A fortnight ago my BB connection cut out suddenly but the phone was working ok. So I called 151 and did all the checks to make sure it wasn't my equipment and the line test eventually showed there was a line fault. I was told it would be fixed in due course which was fine.
4 days later the steady blue BB light came back on on my hub (after flashing purple/orange for at least an hour) and since then my speed has been so bad it feels like I'm back on dial up! Downloading is impossible, the connection drops at least 3 times a day and the BB light on my hub goes back to the orange/purple light for long spells.
Everytime I phone the fault line I get told that my line tests OK to wait untill my line 'settles in' again after having the fault. I've left it for over a week now and there has been no improvement at all - My router has been plugged into the test socket directly for the last 48 hours too but that made no change.. I'm sick fed up of being told to 'wait a while' by the indian fault team! I'm hoping for some advice on the state of the line from you guys - is it worth calling back the fault team (again!) and pushing for an engineer call out?
I've done the noise test on 1707070 on a corded phone and there was a few crackles when i tried it the first time - second time seemed ok though.
I've got a Home Hub 3.
The first BT speed test I did came back saying they could not carry out my speed test as the line was slow and it diverted me to another website where I got these results:
Download Speed (Mbps): 0.07
Upload Speed (Mbps): 0.35
Ping Latency(ms): 82.38
ADSL Line Status
Connection information
Line state:
Connected
Connection time:
0 day, 01:21:52
Downstream:
8,128 Kbps
Upstream:
448 Kbps
ADSL settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.1 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
12.9 dB / 25.0 dB
Line attenuation (Down/Up):
5.0 dB / 3.5 dB
Output power (Down/Up):
11.8 dBm / 12.0 dBm
FEC Events (Down/Up):
0 / 0
CRC Events (Down/Up):
0 / 0
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
Loss of Link (Remote):
0
HEC Errors (Down/Up):
0 / 0
Error Seconds (Local/Remote):
0 / 0
My Exchange is only about 400m away.
Any information would be much appriciated (and sorry for the long post!)Results are:
Download Speed (Mbps): 0.09
Upload Speed (Mbps): 0.35
Ping Latency (ms): 62.50
Diagnostic test:
1. Best Effort Test: -provides background information.
Download Speed
0.09 Mbps
0 Mbps
0.25 Mbps
Max Achievable Speed
Download speedachieved during the test was - 0.09 Mbps
For your connection, the acceptable range of speeds is 0.05 Mbps-0.25 Mbps.
Additional Information:
Your DSL Connection Rate :8.13 Mbps(DOWN-STREAM), 0.45 Mbps(UP-STREAM)
IP Profile for your line is - 0.14 Mbps -
Hi, we had trouble with our phone /BB and vision which were down for about ten days. fault was found to be the line between pole and the main socket into the house, The; B.T engineer replaced the line and socket; which sorted out the phone, but internet was still down. BB was showing as connected, but would not connect to internet and no BT vision service. Phoned BT and Indian lady guided me through different settings and after about half an hour we managed to get the hub to connect to the internet. The speed is very slow now and this is affecting our BT vision as well. I realise that it can take up to ten days for the line to reset to its best setting. can anybody help with the info obtained from our HH1.5 which is wired by ethernet cable to the computer with nothing else connected or running at time of speed test. Original BT speed test result: BT Speed test.08/06/2011 --2am Test1 comprises of two tests 1. Best Effort Test: -provides background information. Download Speed 5751 Kbps 0 Kbps 7150 Kbps Max Achievable Speed Download speedachieved during the test was - 5751 Kbps For your connection, the acceptable range of speedsis 2000-7150 Kbps. Additional Information: Your DSL Connection Rate :7136 Kbps(DOWN-STREAM), 448 Kbps(UP-STREAM) IP Profile for your line is - 6295 Kbps ==================================Latest Hub info shows: DSL Connection Link Information Uptime: 1 day, 10:57:05 Modulation: G.992.5 annex A Bandwidth (Up/Down) [kbps/kbps]: 1,119 / 1,148 Data Transferred (Sent/Received) [MB/MB]: 156.79 / 993.94 ========================================================================= DSL Connection Link Information Uptime: 1 day, 10:58:21 Modulation: G.992.5 annex A Bandwidth (Up/Down) [kbps/kbps]: 1,119 / 1,148 Data Transferred (Sent/Received) [MB/MB]: 156.80 / 993.94 Output Power (Up/Down) [dBm]: 12.5 / 0.0 Line Attenuation (Up/Down) [dB]: 13.5 / 24.0 SN Margin (Up/Down) [dB]: 9.0 / 31.5 Vendor ID (Local/Remote): TMMB / IFTN Loss of Framing (Local/Remote): 0 / 0 Loss of Signal (Local/Remote): 2 / 0 Loss of Power (Local/Remote): 0 / 0 Loss of Link (Remote): 0 Error Seconds (Local/Remote): 2 / 0 FEC Errors (Up/Down): 0 / 171 CRC Errors (Up/Down): 0 / 0 HEC Errors (Up/Down): 0 / 0 Line Profile: Fast Are these in line with what might be expected and should my profile return to the original settings?
you have now been upgraded to 21CN adsl2+. Your noise margin is very high but there is a 10 day training period after an upgrade so just leave it connected with no manual resets.
21CN is more aggressive if you have any noise on your line and what was a good connection with adslmax may not initially be a good connection with 21CN. However if you have a noise problem after training come back and someone will provide assistance
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’. -
Stuck at 0.25 Mbps for 16 days after line repair
Hello,
I am currently experiencing some very slow broadband speeds following repair of a line fault. I believe it is due to a banded profile, although I'm not an expert.
We had terrible noise on our telephone line. As you can imagine, our broadband was severely affected. The fault was repaired on 18th June and now the telephone line is nice and quiet.
However, the broadband has failed to recover. It's now been 16 days since the repair and I've been pulling my hair out. I was told I have to wait 10 days or more for the broadband to recover. Can anyone explain why this is necessary? Contractually am I obliged to suffer an extended period of low speed following a repair? I'm sitting here staring at a solid 32 dB SNR margin whilst paying BT for an unusuable broadband connection.
I have paid for a 3G Modem and SIM card because the BT Broadband is currently unusable. Has anyone ever had success in recovering these type of costs from BT?
Any advice appreciated. Speedtests and router stats below (Draytek Vigor 2830n).
Thanks,
Brian
Signal-Noise Ratio Margin
Loop Attenuationi agree you are in a banded profile and need to stay connected 24/7 for 3/5 days and the banding should release and noise margin drop down to 12/15db with corresponding speed increase. You then to remain connected as noise margin drops probably in steps of 3db until it gets to normal 6db
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’. -
Slow Broadband after 21CN Upgrade?
Before my scheduled 21 upgrade my download connection has been rock solid at 8000K for several years. My whole recent experience with BT has been very disappointing and I hope you can throw some light on a solution.
So Far:
My Equipment: BT2000 Faceplate, RJ11 to BT Homehub 1010, 1 Extension fitted (No Bell wire Connected).
Problem 1. Now resolved. On the day of my appointment the engineer connected my dial tone and broadband to someone else’s line in the next village. The fault call centre insisted the fault could only be in my property as the line tested OK and I would have to accept the possible charges. Despite my requests for them to despatch an engineer to the exchange as it is more than a coincidence that my dial tone disappeared at the same time as my scheduled changeover they insisted I have an appointment. The fault was cleared in the exchange by the visiting engineer.
Problem 2. Now resolved. The engineer did not remove the call divert on my line and I missed my incoming calls for several days as my calls were diverted to a random number. I tried #21# and this did not work, so I contacted BT again. They informed me they could not remove the divert because they had not put it on. After investigation #61# managed to remove my divert. When I asked why it was not removed when my line was fixed I was told that I must have put the divert on myself as it was done by someone with access to my line. The whole point that my line had been connected elsewhere was totally alien to the call centre worker.
Problem 3. On going
After 14 days of Mediocare performance I was connected much slower speed than my old connection and as my profile was 4000k this is only half of my previous performance. (See Below)
1. Best Effort Test: -provides background information.
Download Speed
5959 Kbps
0 Kbps
4000 Kbps
Max Achievable Speed
Download speed achieved during the test was - 5959 Kbps
For your connection, the acceptable range of speeds is 1200-4000 Kbps.
Additional Information:
Your DSL Connection Rate :4603 Kbps(DOWN-STREAM), 1251 Kbps(UP-STREAM)
IP Profile for your line is - 4000 Kbps
The throughput of Best Efforts (BE) classes achieved during the test is - 16.4:29.53:54.07 (SBE:NBEBE)
These figures represent the ratio while sententiously passing Sub BE, Normal BE and Priority BE marked traffic.
The results of this test will vary depending on the way your ISP has decided to use these traffic classes.
2. Upstream Test: -provides background information.
Upload Speed
873 Kbps
0 Kbps
1251 Kbps
Max Achievable Speed
>Upload speed achieved during the test was - 873 Kbps
Additional Information:
Upstream Rate IP profile on your line is - 1251 Kbps
So I call BT again and after I have established that the only changing parameter is the new 21CN upgrade I am promised that a request will be passed to the engineers to increase the profile........ The result is that they just reset my profile, so once again my speed fluctuates for several days from a virtual stop to slow.
It is now six days since reporting my slow speed problems after receiving several calls from BT to ask me if my speed has improved, I am finally a broken man today.
They insist that I have a broadband boost engineer, before I accept this, I ask several questions and failed to get any acceptable answers..
What is wrong with my broadband? You have a fault in the property (change the record!!)
Why cannot you tell me the speed I am connected at. You cannot WOOSH test me? We cannot tell, we have to call you
Can I speak to the engineers? You cannot Sir
Can I speak to your Boss? No, why would you want to do that!
What have you done in the exchange to fix my fault? We have changed some things
Do you thing it is acceptable to still have slow speeds after twenty days? That's why you need a boost engineer
What are you going to do differently from all the other people I have spoken to to resolve my issue. Nothing
So with no other option I accept that an appointment will have to be made again. I am offered an appointment in the week, when I explain that I have business appointments and that I need a weekend appointment I am told none is available or would be available. So I agree to a Monday appointment. After the call I get a text to say I have an appointment has been made for Thursday! So I have to call them back and ask for the appointment I have been promised and I am told it's a simple and easy mistake to press the wrong button, it happens quite often!!
I since read here that it may help to upgrade my homehub, so why have they not sent me a replacement days ago?
Current Performance:
1. Best Effort Test: -provides background information.
Download Speed
2024 Kbps
0 Kbps
2000 Kbps
Max Achievable Speed
Download speed achieved during the test was - 2024 Kbps
For your connection, the acceptable range of speeds is 800-2000 Kbps.
Additional Information:
Your DSL Connection Rate :2271 Kbps(DOWN-STREAM), 771 Kbps(UP-STREAM)
IP Profile for your line is - 2000 Kbps
The throughput of Best Efforts (BE) classes achieved during the test is - 13.35:23.63:63.06 (SBE:NBEBE)
These figures represent the ratio while sententiously passing Sub BE, Normal BE and Priority BE marked traffic.
The results of this test will vary depending on the way your ISP has decided to use these traffic classes.
2. Upstream Test: -provides background information.
Upload Speed
592 Kbps
0 Kbps
771 Kbps
Max Achievable Speed
>Upload speed achieved during the test was - 592 Kbps
Additional Information:
Upstream Rate IP profile on your line is - 771 Kbps
I know there are more important things going on in this world. But my work, my ebay, my shopping, my banking, my social sites etc. all require bandwidth and to have it taken away disguised as an upgrade obviously upsets me. I am shocked at the complete lack of communications, and the inability to listen and understand your customers. What is the point of a call centre that can do NOTHING outside their script to help!
Solved!
Go to Solution.Not sure why my profile is still changing and why I was disconnected today, probably the call centre doing another line test.
Uptime:
0 days, 10:24:37
Modulation:
G.992.5 annex A
Bandwidth (Up/Down) [kbps/kbps]:
803 / 2,523
Data Transferred (Sent/Received) [MB/MB]:
322.86 / 348.70
Output Power (Up/Down) [dBm]:
12.0 / 0.0
Line Attenuation (Up/Down) [dB]:
19.0 / 31.0
SN Margin (Up/Down) [dB]:
13.5 / 30.0
Vendor ID (Local/Remote):
TMMB / IFTN
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
1 / 0
Loss of Power (Local/Remote):
0 / 0
Loss of Link (Remote):
0
Error Seconds (Local/Remote):
1 / 0
FEC Errors (Up/Down):
0 / 0
CRC Errors (Up/Down):
0 / 0
HEC Errors (Up/Down):
0 / 0
Line Profile:
Fast -
Slow broadband after a line fault
Hi,
I recently returned from a week's holiday and found my broadband was dropping out almost every few minutes and was incredibly slow. I also had no dialling tone on my home phone line.
An Openreach engineer called this morning and found that a very old extension wire running through the house was causing the problem. He disconnected the troublesome wire, and now I have a good phone line and a stable broadband connection (connected for over 3 hrs without a problem).
However, the broadband is still very, very slow - the downstream is only 239kbps.
I have very little knowledge about broadband technology, but after a few hours researching I seem to have reached the conclusion that the reason for this is the connection kept dropping out whilst I was away on holiday. This has caused my IP profile to be set at 135kbps (determined by using the BT speed checker). A lot of the forums say that the IP profile will return to normal once the line has been stable for 3-10 days.
So, I guess I'm just looking for some reassurance that after a few days the line will return to normal.
If anyone can set my mind at rest, I'd be most grateful.
Phil
Solved!
Go to Solution.Here are stats from hub:
DSL Connection
Link Information
Uptime:
0 days, 3:57:27
Modulation:
G.992.3 annex A
Bandwidth (Up/Down) [kbps/kbps]:
444 / 239
Data Transferred (Sent/Received) [MB/MB]:
11.31 / 29.76
Output Power (Up/Down) [dBm]:
12.5 / 0.0
Line Attenuation (Up/Down) [dB]:
26.5 / 47.5
SN Margin (Up/Down) [dB]:
27.5 / 31.5
Vendor ID (Local/Remote):
TMMB / IFTN
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
Loss of Link (Remote):
0
Error Seconds (Local/Remote):
0 / 0
FEC Errors (Up/Down):
0 / 86
CRC Errors (Up/Down):
0 / 0
HEC Errors (Up/Down):
0 / 0
Line Profile:
Fast
And from BT Speed tester:
Test1 comprises of two tests
1. Best Effort Test: -provides background information.
Download Speed
58 Kbps
0 Kbps
250 Kbps
Max Achievable Speed
Download speedachieved during the test was - 58 Kbps
For your connection, the acceptable range of speedsis 100-250 Kbps.
Additional Information:
Your DSL Connection Rate :239 Kbps(DOWN-STREAM), 444 Kbps(UP-STREAM)
IP Profile for your line is - 135 Kbps
The throughput of Best Efforts (BE) classes achieved during the test is - 24.53:21.32:54.15 (SBE:NBEBE)
These figures represent the ratio while sententiously passing Sub BE, Normal BE and Priority BE marked traffic.
The results of this test will vary depending on the way your ISP has decided to use these traffic classes.
2. Upstream Test: -provides background information.
Upload Speed
258 Kbps
0 Kbps
444 Kbps
Max Achievable Speed
>Upload speed achieved during the test was - 258 Kbps
Additional Information:
Upstream Rate IP profile on your line is - 444 Kbps
Thanks. -
Slow Broadband after phone line fault rectified
Joined BT Broadband Option 1 on 15/02/11, all was well with linespeed up to 6mbs while stabilising, On the 16/02/11 I reported a Phone fault (Broadband reverted to 135kbps) Phone fault was rectified on 18/02/11 and was told it would be 3 days before my broadband started to improve, it is now 24/02/11 and my Ip profile is still at the fail safe 135kbps, Anyone Help please.
Line state: Connected
Connection time: 0 days, 19:19:09
Downstream: 286.3 Kbps
Upstream: 440 Kbps
ADSL Settings
VPI/VCI: 0/38
Type: PPPoA
Modulation: G.992.5 Annex A
Latency type: Interleaved
Noise margin (Down/Up): 26.3 dB / 23.2 dB
Line attenuation (Down/Up): 30.3 dB / 16.8 dB
Output power (Down/Up): 17.9 dBm / 12.9 dBm
FEC Events (Down/Up): 1528 / 2
CRC Events (Down/Up): 0 / 32
Loss of Framing (Local/Remote): 0 / 0
Loss of Signal (Local/Remote): 0 / 0
Loss of Power (Local/Remote): 0 / 0
HEC Events (Down/Up): 0 / 7
Error Seconds (Local/Remote): 0 / 0
Download speedachieved during the test was - 52 Kbps
For your connection, the acceptable range of speedsis 100-250 Kbps.
Additional Information:
Your DSL Connection Rate :286 Kbps(DOWN-STREAM), 440 Kbps(UP-STREAM)
IP Profile for your line is - 135 Kbps
Thankyou chas2209
Solved!
Go to Solution.Hello,
Your noise margin does seem high but the speed does take about 3-10 days to build up after faults. I had the same issue if you call tech help desk 0800 111 4567 they will be able to sent you profile higher. -
Slow/ unreliable broadband after line upgrade
Approximemtly 2 months ago I received an email informing me that my phoneline was going to be upgraded to improve reliability and possibly speed and that it may take approximently 10 days for my line to settle. At this time I was recieving a steady broadband speed of around 3.5mbps. (Please note my router is the home hub 3 and is upgraded to the latest firmware).
The day after my line was upgraded the line seemed to be as good as before however this deteriorated and I am now recieving speeds that vary from 3mbps down to 1mbps and even 0.05mbps on one ocassion!
I tried contacting BT by phone however they didnt listen to me. They tried changing my router channel and then when my laptop, which I rarely use, wouldnt connect they said the wifi reciever on the laptop was to blame.
I was wondering if anyone else has experienced a similar problem after a so called "upgrade" and if anyone has any ideas or solutions.
Many ThanksADSL Line Status
Connection Information
Line state:
Connected
Connection time:
0 days, 00:54:09
Downstream:
3.773 Mbps
Upstream:
1.004 Mbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.3 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
7.3 dB / 5.9 dB
Line attenuation (Down/Up):
46.1 dB / 26.1 dB
Output power (Down/Up):
17.7 dBm / 12.6 dBm
FEC Events (Down/Up):
340444 / 213
CRC Events (Down/Up):
0 / 32
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
0 / 9
Error Seconds (Local/Remote):
0 / 0
i am not currently connected to my master socket as I found that my connection was less reliable using it than other sockets in my house. -
Like everyone else I have found the BT advisors a waste of time. After taliking for an hour each time to six or seven advisors in the last 3 weeks I was told there was a line fault and that it was now fixed. I have waited 5 days but the speed was about !Mbps at best. I talked to another advisor who said everything was fine and he would get the IP profile reset. I waited another 5 days and still the speed is lower than I should get. Before the fault I was getting about 3.6 Mbps for an IP profile of 4.0 Mbps. Now I get about 2.4 Mbps with the IP profile stuck for two days at 2.71 Mbps. Any help would be appreciated.
The ASDL details are:
ADSL line status
Connection Information
Line state
Connected <script type="text/javascript"></script>
Connection time
2 days, 04:25:59
Downstream
3,071 Kbps
Upstream
1,107 Kbps
ADSL Settings
VPI/VCI
0/38
Type
PPPoA
Modulation
G.992.5 Annex A
Latency type
Fast
Noise margin (Down/Up)
12.4 dB / 5.6 dB
Line attenuation (Down/Up)
53.4 dB / 29.5 dB
Output power (Down/Up)
7.0 dBm / 1.6 dBm
Loss of Framing (Local/Remote)
0 / 0
Loss of Signal (Local/Remote)
0 / 0
Loss of Power (Local/Remote)
0 / 0
FEC Errors (Down/Up)
0 / 0
CRC Errors (Down/Up)
7951 / 9
HEC Errors (Down/Up)
9159 / 0
Error Seconds (Local/Remote)
4918 / 4hi your ip profile is on the new 88.2% system that goes up and down immediately with any change of connection speed there fore it no longer needs resetting as the old system did
the line fault has increased your noise margin which has lowered your connection speed once you have maintained a 3 day connection you can contact the forum mods and get them to reset the noise margin for you this is a link to them
http://bt.custhelp.com/app/contact_email/c/4951
they normally reply by email or phone directly to you within 3 working days
They are a UK based BT specialist team who have a good record at getting problems solved
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’ -
Automatic reset after line repairs? And excessive ...
I returned from a trip to rural India, with excellent broadband, to find my home broadband has been unusable for the first two weeks of November, and is currently operating at 0.5Mbs, a quarter of its usual speed. This is due to a large cable fault and now repair occurring locally. I am only aware of this through word of mouth from the neighbours, no communications at all from BT.
Presumably the current speed is due to the line being dodgy and the frequent disconnections. My question is whether the line will automatically return to full speed when the fault is fixed?
It currently is not fixed, as the phone is off, and hasn't worked for a few days.
The other question is whether BT has made its broadband usage meter any less inaccurate than it used to be, as I seem to have managed to download 6GB mostly during the first off-time at the start of the month? I have been getting suspicious of the meter as I've run over the 10GB limit a few times recently unexpectedly. And no iplayer or online videos here to complicate matters, all far too slow!
Thanks,
Paul.Hi Welcome to the community forums
Here is a basic guide to getting help from the community members done by CL Keith Please read through the link posted http://forumhelp.dyndns.info/speed/first_steps.html
once you have posted the information asked for then the community members can help you more
if using a hub 4 locate these lines located in the hub logs
Lines should look like this
19:11:29, 07 Nov. (2290101.460000) DSL noise margin: 7.00 dB upstream, 6.10 dB downstream
19:11:29, 07 Nov. (2290101.390000) DSL line rate: 448 Kbps upstream, 288 Kbps downstream
Thank You
This is a customer to customer self help forum the only BT presence here are the forum moderators
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’ -
Slow broadband since line upgraded
My boradband speed seems to have slowed. For example I can no longer use BBC iPlayer on my Smart TV or PVR. It may be an amazing coincidence, but it seems the speed went slower at around the time BT sent me an email telling me that they had upgraded my line (13th December 2011). The email said to give it a 10 days to settle, but after 2 months it does not seem to have improved.
BT Speed test say I am getting 1.7Mbps out of 2.3Mbps but it feels slower. uSwitch are showing me as the slowest boradband connection of any house in my street at 1.4Mbps download / 0.3 upload. My Neighbours are apparently getting 2Mbps to 3.1Mbps via BT (and over 5Mbps from other suppliers).
Here are the details from my BT broadband router in case they help...
ADSL line status
Connection information
Line state Connected
Connection time 1 day, 3:22:33
Downstream 1,728 Kbps
Upstream 344 Kbps
ADSL settings
VPI/VCI 0/38
Type PPPoA
Modulation ITU-T G.992.3
Latency type Interleaved
Noise margin (Down/Up) 5.8 dB / 5.0 dB
Line attenuation (Down/Up) 52.5 dB / 25.4 dB
Output power (Down/Up) 0.0 dBm / 12.9 dBm
Loss of Framing (Local) 41
Loss of Signal (Local) 4
Loss of Power (Local) 0
FEC Errors (Down/Up) 0 / 4294967282
CRC Errors (Down/Up) 3908 / N/A
HEC Errors (Down/Up) N/A / 10
Error Seconds (Local) 12274
Do you think this a problem with my connection or my local equipment?
cheers,
JohnThanks for speedy replies. Your assistance is appreciated and have followed the links and read the advice as best I could.
I plugged laptop directly into home hub (with Cat5) and did speed test and got the results below. This seems slower than I would have expected, but would value other peoples judgement.
1. Best Effort Test: -provides background information.
Download Speed
1.51 Mbps
0 Kbps
2 Mbps Max Achievable Speed
Download speed achieved during the test was - 1.51 Mbps For your connection, the acceptable range of speeds is 800 Kbps-2 Mbps. IP Profile for your line is - 1.52 Mbps
2. Upstream Test: -provides background information.
Upload Speed
304 Kbps
0 Kbps
832 Kbps Max Achievable Speed
Upload speed achieved during the test was - 304Kbps Additional Information: Upstream Rate IP profile on your line is - 832 Kbps
We were unable to identify any performance problem with your service at this time. It is possible that any problem you are currently, or had previously experienced may have been caused by traffic congestion on the Internet or by the server you were accessing responding slowly. If you continue to encounter a problem with a specific server, please contact the administrator of that server in the first instance.
Then I did a “quite line test” and heard only the faintest hints of noise.
Then I plugged home hub into the master socket, and did repeat “quite line test” and again heard very similar low levels of noise. Then I got the ADSL info from hub again, with following results:
ADSL line status
Connection information
Line state
Connected
Connection time
0 days, 0:06:52
Downstream
2,019 Kbps
Upstream
376 Kbps
ADSL settings
VPI/VCI
0/38
Type
PPPoA
Modulation
ITU-T G.992.3
Latency type
Interleaved
Noise margin (Down/Up)
6.3 dB / 6.0 dB
Line attenuation (Down/Up)
54.0 dB / 25.5 dB
Output power (Down/Up)
0.0 dBm / 12.9 dBm
Loss of Framing (Local)
52
Loss of Signal (Local)
5
Loss of Power (Local)
0
FEC Errors (Down/Up)
0 / 54
CRC Errors (Down/Up)
0 / N/A
HEC Errors (Down/Up)
N/A / 29
Error Seconds (Local)
12434
Even I can spot that this is different. Although I am not 100% sure what all the differences means, the Noise Margin is now better (6dB+). If understand what I have read this is good/OK. Given this I repeated the speed test (an hour after first one), with following results:
1. Best Effort Test: -provides background information.
Download Speed
1.76 Mbps
0 Kbps
2 Mbps Max Achievable Speed
Download speed achieved during the test was - 1.76 Mbps For your connection, the acceptable range of speeds is 800 Kbps-2 Mbps. IP Profile for your line is - 1.78 Mbps
2. Upstream Test: -provides background information.
Upload Speed
286 Kbps
0 Kbps
832 Kbps Max Achievable Speed
Upload speed achieved during the test was - 286Kbps Additional Information: Upstream Rate IP profile on your line is - 832 Kbps
We were unable to identify any performance problem with your service at this time. It is possible that any problem you are currently, or had previously experienced may have been caused by traffic congestion on the Internet or by the server you were accessing responding slowly.
If you continue to encounter a problem with a specific server, please contact the administrator of that server in the first instance.
I then carried on with some sort of QoS testing it offered and got the following:
1. Assured Rate Test: -provides background information.
Download Speed
1.85 Mbps
0 Kbps
0 Kbps Max Achievable Speed
Download speed achieved during the test was - 1.85 Mbps For your connection, the acceptable range of speeds is 0 Kbps-0 Kbps . Additional Information: Assured Rate IP profile on your line is - 0 Kbps
We were unable to identify any performance problem with your service at this time.
Given the above, it looks to me that some part of the problem is the internal phone wiring / noise beyond the master socket. Is that how others read this?
I also think that even going to the master socket I am still getting relatively slow download speeds compared to neighbour on the same exchange – and so that needs investigating too.
Cheers,
John -
Slow broadband since line fault fixed
Good Afternoon,
A few weeks ago my Broadband dropped out completely which was due to a line fault which has since been repaired. Prior to the line fault I had a connection / download speed close to 1.8Mbps.
Since the fault has been 'repaired' I have struggled to keep a stable connection, the Broadband drops out randomly and is also much slower (almost unbearably slow). I have done all the home help checks etc. and having read many posts on this forum I have concluded that part of the problem may be my Noise margins.
I have not reset my router for several days and have had a connection for over three days now.
Here are the stats from my router and results of the BT Speed test:
ADSL Line Status
Connection Information
Line state:
Connected
Connection time:
3 days, 03:24:38
Downstream:
576 Kbps
Upstream:
448 Kbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.1 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
8.2 dB / 18.0 dB
Line attenuation (Down/Up):
61.1 dB / 31.5 dB
Output power (Down/Up):
16.3 dBm / 12.2 dBm
FEC Events (Down/Up):
420072 / 382
CRC Events (Down/Up):
676 / 85
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
1566 / 45
Error Seconds (Local/Remote):
592 / 238
Speed test results:
Download Speed (Mbps): 0.50
Upload Speed (Mbps): 0.32
Ping Latency (ms): 52.75
To reiterate - nothing in my setup has changed and I haven't done anything that could have caused the problems. The problems have been since the line fault (which I reported as a fault and have had closed out) was repaired.
I will contact the mods for help and see if they can do anything.
Solved!
Go to Solution.Ok, couple of things,
Roger, did the quiet line test - no problems.
John,
I went to check the wiring and found (as I suspected) that both the socket where I plug the router in and the phone extension are hard wired into the faceplate front of the socket that plugs into the test socket - if that makes sense. It assume it shouldn't make any difference though. All my problems have been since the line fault that BT traced and fixed, not problems with my internal wiring. As mentioned previously, my connection and speeds have been fine until the outside fault.
So in checking this, I disconnected my router :-(
It has reconnected and I will post the stats and test results below. What is going on? My connection rate has leapt up to 1.18Mbps but download rate is still poor.
Connection Information
Line state:
Connected
Connection time:
0 days, 00:01:17
Downstream:
1.156 Mbps
Upstream:
448 Kbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.1 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
7.7 dB / 19.0 dB
Line attenuation (Down/Up):
61.0 dB / 31.5 dB
Output power (Down/Up):
17.4 dBm / 12.2 dBm
FEC Events (Down/Up):
28 / 0
CRC Events (Down/Up):
0 / 0
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
0 / 0
Error Seconds (Local/Remote):
600 / 239
Speed tester results:
Download speed achieved during the test was - 0.37
Mbps
For your connection, the acceptable range of speeds is 0.05 Mbps-0.5 Mbps.
Additional
Information:
Your DSL Connection Rate :1.18 Mbps(DOWN-STREAM),
0.45 Mbps(UP-STREAM)
IP Profile for your line is - 0.5 Mbps -
Hi all,
Had a fault on my broadband line for a few months .. random disconnections and poor speed until finally my broadband speed fell through the floor. After a few phone calls to the helpdesk they indentified a fault in the network. One month later and the underground line running down the road is now replaced and all seems good. However the speed on my broadband line hasn't started to recover yet .. 6 days so far ..
ADSL Link
Downstream
Upstream
Connection Speed
283 kbps
888 kbps
Line Attenuation
41.0 db
19.8 db
Noise Margin
30.4 db
10.8 db
Download speedachieved during the test was - 0.22 Mbps
For your connection, the acceptable range of speeds is 0.1 Mbps-0.25 Mbps.
IP Profile for your line is - 0.25 Mbps
Upload speed achieved during the test was - 0.6Mbps
Additional Information:
Upstream Rate IP profile on your line is - 0.83 Mbps
Based on the attenuation and noise margin I think I should be able to achieve around about 6Mbs which is slightly slower than before the fault occured but the IP profile seems to be stuck at 0.25Mbs.
Is it worth waiting longer to see if it improves or do I need to get the IP profile reset and start the 10day training process in motion?
cheers
ElsThis link should also help to explain it.
Why has my speed dropped
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones. -
Hi,
We recently had a problem with our line (lots of noise), so an openreach engineer came out, who was very helpful, and replaced a large section of the outside line that had degraded and fitted a new master box. I was aware that after fixing the fault, I would have to wait for the broadband to retrain, and reset the noise margin on the IP profile.
But I was quite supprised that the day after my speed had actually reduced further. Ive phone the help line, where I was told there was a problem, but no-one seems to be able to sort it, and ive been told to wait. This is very annoying as I had over 11Mbps before the fault, and now its that slow its pretty much unusable for streaming video / games.
This is my current ADSL stats,
Downstream:
1.123 Mbps
Upstream:
440 Kbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.5 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
18.4 dB / 28.6 dB
Line attenuation (Down/Up):
29.1 dB / 17.1 dB
Output power (Down/Up):
18.2 dBm / 12.5 dBm
FEC Events (Down/Up):
215 / 41
CRC Events (Down/Up):
0 / 11
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
0 / 7
Error Seconds (Local/Remote):
16 / 0
(before the fault, the nosie margin was ~7db each way)
Any Suggestions of what to do next would be greatly appreciated, as the call centre's dont seem to be of any use.Upto 2d 10hours it remained exactly the same. Ive just come in from work now, where it should have reached 3d 5hours, but here is the status
Connection Information
Line state:
Connected
Connection time:
0 days, 05:44:10
Downstream:
1.123 Mbps
Upstream:
888.9 Kbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.5 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
18.2 dB / 13.0 dB
Line attenuation (Down/Up):
29.0 dB / 17.1 dB
Output power (Down/Up):
18.2 dBm / 12.0 dBm
FEC Events (Down/Up):
429 / 0
CRC Events (Down/Up):
0 / 0
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
0 / 0
Error Seconds (Local/Remote):
20 / 0
It looks like it has resynced, and the upstream nosie margin has reduced, and the upstream speed improved. The downstream though is exactly the same. I really cant wait another 3 days again, as ive now been without usable internet for 7 days already, and i will probably need it for work this weekend.
So what do i do next?
Maybe you are looking for
-
Photo Editing, Photoshop elements 4.0 doesn't work with snow leopard?
Tried reinstalling photoshop elements after upgrading to snow leopard and message came back not compatible. ? , what version is that doesn't break you wallet and can do some decent photo editing including cutting and removing parts of images, pasting
-
I have a custom list called "Suggestions" with a field called 'Notes from Reveiwer'. Folks enter a new suggestion and kicks off a workflow to approvers. Approvers review the suggestions and add notes. When notes are added, I would like to have the
-
OIM 11g process implementation
Hi All, We have a requirement where some roles(priviliges in the target app) are getting provisioned. Each role is considered as a separate resource instance and getting provisioned for users.And we have automated this process using schedulers where
-
Changing the speed of Ethernet Link of the PC to 10 or 100 MBPS
Hello, I need to change Ethernet Speed of the PC programmatically that is change the Speed to either 10 or 100 mbps. Is it possible, If yes , then please let me know the procedure. Or atleast I should be able to read the PC Ethernet speed in LabVIEW
-
Pdf icons in Textedit document
When opening a Textedit document which contains pdf files, the pdf's open as scrollable windows inside the text document. Is it possible to display as pdf icons instead? thanks Ken