Slow broadband after upgrading from Homehub 2 to 4

Upgraded from our old, dependable Homehub 2 a couple of moths ago. Was offered Homehub 4. Since then, with nothing else changing, we found the speed to be a lot slower, both on wired (Ethernet) connections and with wireless. We have quite a few devices connected (3 PC's, 1 AppleTV box on Ethernet and a couple of IPad 2's, Wii and couple of phones on WiFi) but didn't have a problem before. I am seriously thinking about putting my Homehub 2 back. Can anyone throw any light or give any suggestions as to why we have these speed and connection issues? TIA<script charset="UTF-8" type="application/javascript" src="chrome://hdv/content/hdv.js"></script>

welcome to the BT community forum where customers help customers and only BT employees are the forum mods
in order for the forum members to help please can you run btspeedtester (MAC users may have problems). when first test completes then run diagnostic test and post the results ( do not reset the router).
are you connected directly via a filter to the NTE5 master or test socket or to somewhere else? Is the master the only phone socket in your home?
Have you tried the quiet line test? - dial 17070 option 2 - should hear nothing - best done with a corded phone. if cordless phone you may hear a 'dull hum' which is normal
Someone may then be able to offer help/assistance/suggestions to your problem
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Similar Messages

Very slow encoding after upgrade from 5.03 to 5.5 with MXO2 mini

Hi all.
After upgrading from CS5.03 to 5.5 my encoding now takes 5 times as long. A 2 minute HD Video file would take 2 minutes, and still does on the PC I haven't upgraded (identical almost) but now with CS5.5 it takes almost 11 minutes.
Some explanation....
I create HD MJPEG files on a PC with Blackmagic Decklink.
I transfer these files to an HPz800 which used to run CS5.03 with Matrox Utils 5.1.1.37 and an MXO2 Mini with Max. (Nvidia Quadro fx4800 and 12GB of RAM)
On a Blackmagic timeline HD 1080i MJPEG with filters of Auto Color, Fast Color Corrector and Gamma correction a 2 minute timeline would encode in 2 minutes give or take a couple of seconds.
Now with CS5.5 and Mtx 5.5 an identical file takes 11 minutes to encode to Microsoft avi - Matrox 1920 x 1080i - 25fps.
If I remove the filters (which I need to be able to use) it will come down to 2 minutes as it used to be.....so it seems to be the filters are now slowing things down when they never used to. I have never rendered before exporting. Ever. So this time I tried rendering first and it brought the 11 minutes down to 7 minutes but when taking into account the 4 minutes rendering time I am no better off.
I have updated CS5.5 to CS 5.5.1 and MTX Utils to 5.5 and then 5.5.1 and it makes no difference. Still 11 minutes to decode 2 minutes with three filters, which is exactly what I have always been doing but now it doesn't work....
Can anybody help? or make a suggestion as to why using filters in 5.5 now multiplies the encode time by 5 when it never used to. Everything else bar Matrox Utils on this machine is as it was before the upgrade to 5.5 and as I say my older machine is still 5.03 it can do it all in 2 minutes even with the filters intact.
So have I really spent a small fortune upgrading to make my output 5 times slower. Not happy......

To go further, every single encode that I have done is slower than it was before with CS5.01 or 5.03.
This is odd because going from Blackmagic to any other codec doesn't necessarily need the Matrox box or Matrox utils
Blackmagic HD or SD to
Matrox HD
QT HD MP4
QT SD DV25
DV AVI SD
Mpeg2 - DVD
Every single encode is slow by 2x to 6x.
Why should Blackmagic HD to QT MOV MP4 take twice as long as it used to...... having said that The speeds I am seeing now are what it was like before I attached the box in the first place, whether a Matrox codec was involved or not.... It is acting like a blocked funnel. when it used to be a lovely wide and clear funnel.
Anyway Matrox have reproduced the problem and are investigating, so hopefully there will be an answer soon....

Mountain Lion OSX slow response after upgrade from Lion

I have issues now to open Microsift Outlook Mail application as it is very slow in opening and all this is after install OSX ML only, frustrating time again

Nilhan, I believe I found my problem which affected two machines running ML 10.8. I found two Outlook preferences files - identical but for date - that I believe were causing a conflict.
It was intuition that led me to search for this. I noticed the splash screen text was mentioning that Outlook was looking for identities on startup. I'd never before noticed this, or it happened so quickly that I've never seen it. In any event, I did a search for all files name "outlook" using the program EasyFind. When the search completed, I sorted the found files by type. I was looking for duplicate preferences - and I found them.
There were two folders named "Office 2011." One was in (user) > Library > Preferences > Microsoft. The other was in (user) > Library > Application Support > Microsoft > Office > Preferences. These two identically named folders each had similar items enclosed, including a file named "Outlook Preferences." The dates on the "Outlook Preferences" files were not the same, although they were the same size. The date on the older file corresponds to a Microsoft Office update which was supposed to move things to locations required by Mountain Lion. The older files (some of the file dates were current - yet duplicates in name of others) were in the location: (user) > Library > Preferences > Microsoft.
I moved the "Office 2011" folder located in (user) > Library > Preferences > Microsoft to the trash. I did not empty the trash just out of caution, although I probably will ...or even archive them via a zip file, etc. Next, I restarted my machine. After logging in, I rebuilt the Outlook database using Microsoft Database Utility (hold the Option key and start Outlook to start it). I then backed up my Main Identity to a separate disk as another caution. Next, I once again restarted.
After giving the machine a little time to settle down, I opened Outlook 2011. Outlook now opened many times faster then before. I would venture to say that it is now opening as quickly as before the 10.8 ML install. All functions within Outlook also seem to be at normal speed.
This process was repeated on another Mac with a new install of 10.8 ML and Office 2011. I had tested Outlook on that machine, and it was slow. After the deletion of the duplicate preference files, Outlook was fast as ever - noticeably very fast. It was a vast difference on that machine. The Main Identity database is much smaller on that machine than the previous machine, so it should be quicker. Still, it was a tremendous difference in speed after I dumped the older preferences on it.
I am no expert on the workings of 10.8 ML compared to earlier versions of OS X, but I do understand that certain preference files are now required to be in a certain place ...different than earlier versions, or perhaps just mandating that all preference files be in a universal spot. Something like that... In any event, 10.8 ML was not the problem, but seems to have brought a problem to light. If I am going to point a finger, I will point it at a Microsoft Office update that didn't quite do its job correctly. There was trouble with an Office update not long ago, and I suspect I was a victim of that.
Maybe you are, too. Hope this helps.

Slow Queries After Upgrade from 9i to 11g

We are in the process of upgrading several of our databases from 9i to 11g. I am doing some performance testing using SQL developer and I have found that some queries are executed much faster on 9i than 11g. For example, the following query ran in 0.258 seconds on 9i and 836.50 on 11g (both databases have the same tables, indexes, data and there were no other jobs running at the time when I tested this query).
SELECT a.seq_short as seq_short, a.seq_long as seq_long, a.MD5 as md5,
a.upi as upi_key, a.len as length, a.crc64 as crc64, b.DBID as dbid,
c.DESCR as descr, c.FULL_DESCR as full_descr, b.ac as accession, b.gi as gene_id
FROM uniparc.protein a, uniparc.xref b, uniparc.cv_database c
WHERE a.upi = b.upi
AND b.dbid = c.id
;If you have any ideas what may be causing the slow down, or suggestions on how I can speed up the 11g query please let me know.
Regards,
Steve

Welcome to the forums !
How to post a tuning request:
HOW TO: Post a SQL statement tuning request - template posting
When your query takes too long ...
HTH
Srini

After upgrading from acrobat 9.5 to XI pro my users have complained on slow typing when filling in form that were created in version 9.5?

After upgrading from acrobat 9.5 to XI pro my users have complained on slow typing when filling in form that were created in version 9.5?
The issue is they type but there is 2 second delay when it appears in the field.
Windows 7 64bit

I see, I misread your reference to Reader 11 to mean you were using Acrobat 11, but it looks like it worked out anyway.
The base-14 fonts are special in PDF because they are guaranteed to be available even if they are not embedded. If you select a non-base-14 font for use with a form field, the entire font usually gets embedded, since each glyph it contains has to be available for use with the field. This can take up a lot of space if you do this a lot, and the space isn't reduced if you change back to a base-14 font later because the internal reference to it is not removed. This is caused by the bug I mentioned.
In your case, however, the entire font doesn't get embedded because fonts like it (e.g., large asian fonts with a lot of glyphs, Arial Unicode) would take up too much space if fully embedded. If it did, a 100KB PDF could bloat to 20MB with that one change. Instead, users are expected to have such fonts installed on their system, which is why you were prompted to install the font pack. This despite the fact that the font was not actually used by anything in your document, it was simply the orphaned reference to it that triggered this. This should get fixed in Acrobat eventually so this type of thing doesn't happen again.

After upgrading from Snow Leopard to Mountain Lion, the text preference, Middle Eastern, causes Photoshop CS6 to slow down. Can this be fixed?

After upgrading from Snow Leopard to Mountain Lion, and setting the text preference, Middle Eastern, causes Photoshop CS6 to slow down. Can this be fixed?

I'm Win, not Mac, but I do have a couple saved messages
Mac 10.8.3 Bug w/Encore and BluRay http://forums.adobe.com/thread/1198709
-create folder not ISO http://forums.adobe.com/thread/1216127

The optimizer changed after upgrade from 8i to 10g

I have upgraded my Oracle database from 8i (8.1.7.3) to 10g (10.2.0.3). After upgraded, there's some SQLs are with performance issue that the response time is very slow. The SQL can run very fast (around 1 seconde) in the pre-upgrade environment. Also, after generating the execution plan, there's different from the original enivronment (8i) which the query using some full table scan instead of index scan originally used in 8i.
The optimizer_mode of 8i is RULE and it's CHOOSE when upgraded.
My questions are:
1. Do I have any init.ora parameters setting in 10g environment which differ from 8i?
2. What method of analyzing tables is appropriate to use in 10g? Will this affect the performance like my case?
Thanks,
Wai

Please have a look to following threads:
Re: Optimizer Statistics collection after upgrade from 8i to 10R2
Re: DB upgrade from oracle 8.1.7 to oracle 10.2.0.2

Query slows down after upgrade

Hi,
After upgrade from oracle 10 to oracle 11 a simple query is slowing down alot.
Same amount of records, same table only the execution cost time is increased
Can someone give me some feedback over this problem?
Can I check some things to look into the problem?
Thx in advance.
Greetings
query:
Select nvl(sum(a.BM_OPENSTAAND_DEBET- a.BM_OPENSTAAND_CREDIT),0)
from bh.bh123gh a
where
a.F123_AR_NR>='4400000000' and
a.F123_AR_NR<='4404000000' and
a.F123_KL_LEV_AR_NR='0631001000' and
a.SRT_REK=2 and
a.F123_BKJR>=0000 and
a.F123_BKJR<=2011 and
a.F123_FIRMA=2
explain plans
oracle 11
cost 1,792
Bytes: 38
Cardinality: 1
oracle 10
cost 1,594
Bytes: 38
Cardinality: 1

>
After upgrade from oracle 10 to oracle 11 a simple query is slowing down alot.
Same amount of records, same table only the execution cost time is increased
Can someone give me some feedback over this problem?
Can I check some things to look into the problem?
Thx in advance.
>
Is it just one query or all queries are behaving strangely? If it's just one query, do a trace and see where it's slowing down.
In the meanwhile, you can also modify the optimizer_features_enable parameter at session level and check the explain plan.
Alter session set optimizer_features_enable='10.2.0.5';
Now test the query.
By the way, if you are just worried about the COST factor, you can just ignore it. COST by itself has no real meaning. You will only have to look at the response time.
Regards

My macbook Pro has been slow down after upgrading to mountain Lion

After upgrading from lion to mountain lion my macbook pro become slow in booting, shutdown as well as in opening programs.
Is it problem with OS or in my mac
In either way what should i do to get my previous speed back.

I have the same exact problem

After upgrade from 10.2.0.1 to 10.2.0.4 enterprise manager not working

after upgrade from 10.2.0.1 to 10.2.0.4
on windows enterprise manager is not working
Edited by: 830525 on Mar 24, 2012 9:44 AM

F:\Documents and Settings\hakem>emctl start dbconsole
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
https://M1C3:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 10g Database Control ...The OracleDBConsoleor
cl service is starting..........................................................
The OracleDBConsoleorcl service could not be started.
A service specific error occurred: 1.
More help is available by typing NET HELPMSG 3547.
F:\Documents and Settings\hakem>NET HELPMSG 3547
A service specific error occurred: ***.
EXPLANATION
A service-specific error occurred.
ACTION
Refer to the Help or documentation for that service to determine the problem.
that's what happen while trying to start db console

File- Export not working after upgrade from 11i to R12

Hi,
File -> Export not working after upgrade from 11i to R12.1.3 in few systems. Can you please let me know what could be the issue.
If export record count more than 200 it is working fine in all the systems and if change the profile option "Export MIME type” value to ‘text/tab-separated-values’ from application/excel also it is wokring.
Thanks and Regards,
Jagadeesha

Enabled the FRD. Below are few last lines. Can you please let me know what i can in this log file contents.
In Argument 1 - Type: String Value: global.frd_debug
Executing GET_ITEM_PROPERTY/FIELD_CHARACTERISTIC Built-in:
In Argument 0 - Type: Integer Value: 196613
In Argument 1 - Type: Number Value: 54
Out Argument 0 - Type: String Value: 12
Executing COPY Built-in:
In Argument 0 - Type: String Value: Entering app_menu.set_prop.
In Argument 1 - Type: String Value: global.frd_debug
Executing FIND_MENU_ITEM Built-in:
In Argument 0 - Type: String Value: FILE.EXPORT
Out Argument 0 - Type: Integer Value: 19
Executing GET_MENU_ITEM_PROPERTY Built-in:
In Argument 0 - Type: Integer Value: 19
In Argument 1 - Type: Number Value: 79
Out Argument 0 - Type: String Value: TRUE
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_menu.set_prop.
In Argument 1 - Type: String Value: global.frd_debug
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_synch.menu_toolbar_sync. Event is WHEN-NEW-ITEM-INSTANCE.
In Argument 1 - Type: String Value: global.frd_debug
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: GLOBAL.APP_CUSTOM_MODE
Out Argument 0 - Type: String Value: NORMAL
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: GLOBAL.APP_CUSTOM_MODE
Out Argument 0 - Type: String Value: NORMAL
Executing COPY Built-in:
In Argument 0 - Type: String Value: NULL
In Argument 1 - Type: String Value: GLOBAL.OUT
Executing USER_EXIT Built-in:
In Argument 0 - Type: String Value: FND GETPROFILE NAME="UPK_RECORDING_ENABLED" FIELD="GLOBAL.OUT" N
FNDCPVCM, 11, Built-In, Entry, 316509814, USER_EXIT
FNDCPVCM, 11, Built-In, Exit, 316509814, USER_EXIT
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: GLOBAL.OUT
Out Argument 0 - Type: String Value: N
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_form
Out Argument 0 - Type: String Value: FNDCPVCM
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_block
Out Argument 0 - Type: String Value: MASTER
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_form
Out Argument 0 - Type: String Value: FNDCPVCM
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_block
Out Argument 0 - Type: String Value: MASTER
Executing GET_APPLICATION_PROPERTY Built-in:
In Argument 0 - Type: Number Value: 75
Out Argument 0 - Type: String Value: IHR40P
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed call_all_libraries. Event is WHEN-NEW-ITEM-INSTANCE.
In Argument 1 - Type: String Value: global.frd_debug
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_standard.event. Event is WHEN-NEW-ITEM-INSTANCE.
In Argument 1 - Type: String Value: global.frd_debug
FNDCPVCM, 10, Prog Unit, Exit, 316509814, /FNDCPVCM-3/P45_30_DEC_201223_28_33
FNDCPVCM, 9, Trigger, Exit, 316509814, WHEN-NEW-ITEM-INSTANCE
FNDCPVCM, 8, Prog Unit, Exit, 316509814, /DMU-4/P8_30_DEC_201223_23_12
# 15 - FNDCPVCM:MASTER.USER_CONCURRENT_QUEUE_NAME.1359399301498413820
WINDOW FNDCPVCM PROGRESS_INDICATOR RESIZE 4198 1500 3
# 16 - FNDCPVCM:MASTER.USER_CONCURRENT_QUEUE_NAME.1359399301512613925
WINDOW FNDCPVCM PROGRESS_INDICATOR RESIZE 4198 1500 3

Lost Developer Toolbar after upgrade from 4.1 to 4.2

After upgrading from 4.1 to 4.2.1.00.08, we have lost the Developer Toolbar.
Have others run into this with the upgrade or fresh installation of 4.2.1?
If so, what suggestions are there for fixing, short of reinstallation mentioned in this other thread:
{message:id=10692572}
Following the guidance there to look at the instance ID and other preference settings, I compared our three instances. The two that are not having the problem are both at 4.2.0.00.27.
Here are the preferences that exist on our other instances but are null on the problem instance:
APEX_4_1_0_PATCH_12920544
APEX_4_2_0_PATCH_14777994
APP_EXPORT_TO_DB_ENABLED
HPROF_DIRECTORY
INSTANCE_ID
MOBILE_DEVELOPMENT_ENABLED
PRINT_SVR_HOST
PRINT_SVR_PORT
PRINT_SVR_SCRIPTI have asked our support team to review the upgrade log. Re-installation from scratch is an option.
Any advice is welcome.
Skip

Thanks, Joel.
You inspired me to take a closer look, and look beyond the upgrade.
After the upgrade, my application passed a superficial checkout. Later, I exported my application and in the export file, the Instance ID was not NULL. I had not noticed any problems with how APEX was working.
The problems of the missing Developer Toolbar, Instance ID = NULL, and a new one, did not occur until I removed my application and tested a clean installation of the workspace and application. This is the sequence of events. The immediate triggering cause is clearly one of the following:
1. Deinstall application (ID 820) from APEX 4.2.1.00.08 instance, running 11g (11.1.0.7.0).
2. Remove workspace (PVA_AH9_R12)
3. (drop the parsing schema, xxpva, and related tablespace)
4. (create tablespace and schema user, xxpva)
5. Import workspace (PVA_AH9_R12) from an APEX 4.2.0.00.27 instance.
6. Import application (ID 820) including supporting objects from an APEX 4.2.0.00.27 instance, running 11g (11.2.0.1.0).
The next day I noticed the Developer Toolbar missing problem, and found that Instance ID is NULL.
Also, after Exporting an application in Database format, I cannot download the file from the Export Repository. When I click the filename link, I get 'Access Denied' instead of the normal download dialog.
Does this suggest anything else I should look into?
Do you think I should post this as a new problem/question with more detail about the sequence of events?
Skip

SSO and Portal down after upgrade from AS 10.1.2.0.2 to 10.1.2.3

SSO and Portal is down after upgrade from AS 10.1.2.0.2 to 10.1.2.3. All others are running fine. Any similiar experience and solution?
Thanks.
Andy

cn=XXX information is missing for the SSO Server (orasso) when going to http://servername:7777/pls/orasso/orasso.home. Is that causing the problem? If so, how can I resolve it?
Thanks.
Andy

Remote Desktop Connection stop working after upgrade from 10.5.8 to 10.6.1

I too could not connect to a W2K3 server with RDC 2.0.1 after upgrading from Mac OS X, 10.5.8 to 10.6/10.6.1. I have another Mac which is on 10.5.8 and connect fine with the same version of RDC 2.0.1 as well as other PC with Terminal Service Clients.
There is no change on the server side. I have uninstalled and reinstalled RDC 2.0.1 several time and it did not resolve the issue. To rule out firewall/network, I tested with another remote desktop application called CoRD (for Mac) on the same laptop running SL 10.6.1 and it connected to the same W2K3 server fine.
One thing that is worth mentioning (in my case), when it does not connect, RDC totally quit (not running anymore. Not minimize, no cannot connect error message, no little dot on the Dock for RDC, nothing) right after I put in the credential in. When looking at the log entries that are related to RDC in the Console application, I see the following
machine 10.6.1. with RDC 2.0.1 (non-working)
9/22/09 1:17:16 PM [0x0-0x3a03a].com.microsoft.rdc[468] objc[468]: Class NLAssertionHandler is implemented in both /Applications/Remote Desktop Connection.app/Contents/MacOS/../Frameworks/Netlib.framework/Versions/12/Netlib and /Applications/Remote Desktop Connection.app/Contents/MacOS/../Frameworks/RDCPAL.framework/Versions/12/RDCPAL . One of the two will be used. Which one is undefined.
On the 10.5.8 machine with RDC 2.0.1 (working), I see the following entries
9/22/09 1:13:23 PM [0x0-0x24f24f].com.microsoft.rdc[5502] objc[5502]: Class NLAssertionHandler is implemented in both /Applications/Remote Desktop Connection.app/Contents/MacOS/../Frameworks/Netlib.framework/Versions/12/Netlib and /Applications/Remote Desktop Connection.app/Contents/MacOS/../Frameworks/RDCPAL.framework/Versions/12/RDCPAL . Using implementation from /Applications/Remote Desktop Connection.app/Contents/MacOS/../Frameworks/RDCPAL.framework/Versions/12/RDCPAL .
9/22/09 1:13:39 PM Remote Desktop Connection[5502] * _NSAutoreleaseNoPool(): Object 0x16a25c20 of class NSCFArray autoreleased with no pool in place - just leaking
Stack: (0x9277af4f 0x92687432 0x93062bf5 0x926ce0fb 0x9723dff5 0x9268d52c 0x92fd447a 0x92fd4753 0x92fd4a48 0x930375da 0x530bac 0x4831a2 0x483750 0x483c0b 0x47a811 0x4796ac 0x485dad 0x47d475 0x5099dc 0x574c70 0x4ade03 0x4ae65d 0x4ae6f7 0x4ac8dd 0x53260c 0x534187 0x4ae76a 0x4ae7d0 0x4ae88e 0x493925 0x4ae13d 0x533b1a 0x53da6c 0x94a48057 0x934b3155 0x934b3012)
Any help would be appreciated

Doing some more troubleshooting after my post above as I saw a couple of entries referencing Stop Light keep popping up in the log of the Console. I removed Stoplight and Cocoa Gesture (for good meausre) and RDC 2.0.1 started working. I think it is Stop Light which causes RDC stop working, but I don't have to time right now to put Cocoa Gesture back to confirm that. I might if I have the time or post here if you have Stop Light installed as well and removing it resolved the RDC issue for you.

ITunes Not Recognizing my iPod Touch after Upgrading from Tiger to Leopard

After upgrading from Tiger (10.4.x) to Leopard (10.5.0=>10.5.6), my iPod Touch is no longer recognized by iTunes 8.0.2. The iPod Touch no longer appears in iTunes' "source list" (left side pane in iTunes' GUI).
Immediately prior to that upgrade, my iPod Touch was working great with Tiger (10.4.x). iTunes 8.0.2 recognized it (listed it in sources) and always synchronized with it successfully.''
My iPod Touch is also not shown in the Finder. However, it does show up as recognized in iPhoto.
Any ideas on how to get the iPod recognized again in iTunes under Leopard?

Thanks to a posting by Jim in a different Apple Discussions (forum), my problem is now resolved. Read on for the details.
iPods & Finder. Some other postings incorrectly lead me to believe that the iPod would show up in the "Finder". Jim's posting set me straight on this.
iTunes Not Recognizing iPod Touch. Prior to Jim's posting, I had already read the article that Jim referenced (to remove and reinstall the Apple Mobile Device Service per article "http://support.apple.com/kb/HT1747").
Prior to Jim's posting, I had also read other articles in various "Apple Discussions" (forums) that suggested this recognition problem could be resolved by uninstalling/re-installing iTunes 8.0.2. Some implied that you could just re-install iTunes 8.0.2 right over the currently installed one without bothering to uninstall it.
Based on those postings, I "gambled" last night and simply downloaded and re-installed iTunes 8.0.2 (without uninstalling it first). I noticed during the installation that the Apple Mobile Device agent was also re-installed. Well, my gamble paid off! After the installation (and a reboot?), iTunes onces again RECOGNIZED my iPod Touch.

Slow broadband after upgrading from Homehub 2 to 4

Similar Messages

Maybe you are looking for