Slow broadband over the past few days.

My broadband speed has gone slow pver the past few days, from a guaranteed 2mbps to 0.92kbps
http://www.speedtest.net/my-result/3615801582
I'm a BT Vision customer, so if I don't have the 2mbps guaranteed, my Bt Vision is pointless. 
Any help would be greatly appreciated. 

in order for the forum members to help please can you post the adsl stats from your router you may need to 'show detail' to get all stats (if hub enter 192.168.1.254 in your browser and navigate to adsl or if HH4/5 then go to troubleshooting then logs and you are looking for 2 line together when hub last connected to internet and they will show your connection speed and noise margin or if netgear enter 192.168.0.1). Then run  btspeedtester  (MAC users may have problems). when first test completes then run diagnostic test and post the results ( do not reset the router).
are you connected directly via a filter to the NTE5 master or test socket or to somewhere else? Is the master the only phone socket in your home?
Have you tried the quiet line test? - dial 17070 option 2 - should hear nothing - best done with a corded phone. if cordless phone you may hear a 'dull hum' which is normal
there is no speed guaranteed - all packages are sold as up to speeds.  no ISP guarantees any speed
Someone may then be able to offer help/assistance/suggestions to your problem
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Similar Messages

  • I cannot log on to my Comcast e-mail from my IMac anymore.  This is a new issue, recently I had to delete cookies from my system in order so my email wasn't frozen, but over the past few days it has went from bad to worse.  Any suggestions-I am not very c

    I cannot log on to my Comcast e-mail from my IMac anymore.  This is a new issue, recently I had to delete cookies from my system in order so my email wasn’t frozen, but over the past few days it has went from bad to worse.  I am able to enter my login information, but it just goes right back to the home page.  Any suggestions…maybe I deleted something else in the process.

    OK, restart in Safe Mode, this will clear some caches. It's possible one or more is corrupt. To restart in Safe Mode when you hear the start up tone hold down the Shift Key until you see a progress bar. Let it fully boot then restart normally and test.
    Also I am assuming you have checked Finder - Preferences  - General and see what boxes are checked in "Show these items on desktop." You can also mount an item in Disk Utility, simply highlight it and then look in the File menu for Mount.....

  • I have anew iMac, less than 3 months old -  over the past few days i notice my wireless mouse keeps looksing contact with the mac. why is this?  anything i can do ?

    I have a new iMac, less than 3 months old -  over the past few days i notice my wireless mouse keeps loosing contact with the mac. why is this?  anything i can do ?

    thanks.   battery level is ok.  have just reinstalled the mouse.....  as to whether the problem continues, i'll have to see over next few days......thanks for your help

  • My iMac has slowed considerably over the past few weeks.

    Even after simply entering my password to get through screensaver there is a lag of 7-10 seconds. running 10.9.2 on a 3.06 intel core 2 duo. please advise

    Suggestions of Things You Can Do To Help A Slow Computer
    If your computer seems to be running slower here are some things you can do:
    Start with visits to:     OS X Maintenance - MacAttorney;
                                      The X Lab: The X-FAQs;
                                      The Safe Mac » Mac Performance Guide;
                                      The Safe Mac » The myth of the dirty Mac;
                                      Mac maintenance Quick Assist.
    Boot into Safe Mode then repair your hard drive and permissions:
    Repair the Hard Drive and Permissions Pre-Lion
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    Repair the Hard Drive - Lion/Mountain Lion/Mavericks
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilites Menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD disk icon and click on the arrow button below.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
    Restart your computer normally and see if this has helped any. Next do some maintenance:
    For situations Disk Utility cannot handle the best third-party utility is Disk Warrior;  DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible.
    Note: Alsoft ships DW on a bootable DVD that will startup Macs running Snow Leopard or earlier. It cannot start Macs that came with Lion or later pre-installed, however, DW will work on those models.
    Suggestions for OS X Maintenance
    OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep.  Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger.  These utilities have limited or no functionality with Snow Leopard or later and should not be installed.
    OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive.
    Helpful Links Regarding Malware Protection
    An excellent link to read is Tom Reed's Mac Malware Guide.
    Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
    See these Apple articles:
              Mac OS X Snow Leopard and malware detection
              OS X Lion- Protect your Mac from malware
              OS X Mountain Lion- Protect your Mac from malware
              About file quarantine in OS X
    If you require anti-virus protection I recommend using VirusBarrier Express 1.1.6 or Dr.Web Light both from the App Store. They're both free, and since they're from the App Store, they won't destabilize the system. (Thank you to Thomas Reed for these recommendations.)
    Troubleshooting Applications
    I recommend downloading a utility such as TinkerTool System, OnyX, Mavericks Cache Cleaner, or Cocktail that you can use for removing old log files and archives, clearing caches, etc. Corrupted cache, log, or temporary files can cause application or OS X crashes as well as kernel panics.
    If you have Snow Leopard or Leopard, then for similar repairs install the freeware utility Applejack.  If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line.  Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. Applejack does not work with Lion and later.
    Basic Backup
    For some people Time Machine will be more than adequate. Time Machine is part of OS X. There are two components:
    1. A Time Machine preferences panel as part of System Preferences;
    2. A Time Machine application located in the Applications folder. It is
        used to manage backups and to restore backups. Time Machine
        requires a backup drive that is at least twice the capacity of the
        drive being backed up.
    Alternatively, get an external drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
      1. Carbon Copy Cloner
      2. Get Backup
      3. Deja Vu
      4. SuperDuper!
      5. Synk Pro
      6. Tri-Backup
    Visit The XLab FAQs and read the FAQ on backup and restore.  Also read How to Back Up and Restore Your Files. For help with using Time Machine visit Pondini's Time Machine FAQ for help with all things Time Machine.
    Referenced software can be found at MacUpdate.
    Additional Hints
    Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
    Add more RAM. If your computer has less than 2 GBs of RAM and you are using OS X Leopard or later, then you can do with more RAM. Snow Leopard and Lion work much better with 4 GBs of RAM than their system minimums. The more concurrent applications you tend to use the more RAM you should have.
    Always maintain at least 15 GBs or 10% of your hard drive's capacity as free space, whichever is greater. OS X is frequently accessing your hard drive, so providing adequate free space will keep things from slowing down.
    Check for applications that may be hogging the CPU:
    Pre-Mavericks
    Open Activity Monitor in the Utilities folder.  Select All Processes from the Processes dropdown menu.  Click twice on the CPU% column header to display in descending order.  If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar.  Click on the Force Quit button to kill the process.  See if that helps.  Be sure to note the name of the runaway process so you can track down the cause of the problem.
    Mavericks and later
    Open Activity Monitor in the Utilities folder.  Select All Processes from the View menu.  Click on the CPU tab in the toolbar. Click twice on the CPU% column header to display in descending order.  If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar.  Click on the Force Quit button to kill the process.  See if that helps.  Be sure to note the name of the runaway process so you can track down the cause of the problem.
    Often this problem occurs because of a corrupted cache or preferences file or an attempt to write to a corrupted log file.

  • Over the past few days, sometimes opening a webpage in a new tab leads to that page and all of my other tabs coming up just black.

    For example- I will have several tabs running, and will hit the "+" sign for a new tab, and choose a website. Firefox will load the page (ie, the circle in the top left that denotes that a page is loading will run, and will then be replaced by the website's icon), but the tab itself will be pure black under the navigation bar. I know the page gets loaded, since the website's icon shows, and if it's a forum, for example, I will get the message that it's linked with Tapatalk; but suddenly all of my tabs are black. In order to be able to actually do anything on Firefox again, I have to either quit out or Force Stop it; however, the problem eventually recurs. I've even uninstalled and re-installed Firefox, to no avail. I'm using an old Motorola Atrix (bought it summer of 2011), and the latest version of Firefox. Not really sure what's going on here. Thanks!
    This has only been going on for about a week now, but it's very frustrating.

    Well, the only add-on I have is the AdBlocker Plus, and I'd installed it when I first installed Firefox, so I don't think that was the issue. Also, can you even run Firefox Safe Mode on a phone? (I wasn't super clear that this is on my Android phone; it's buried in my post a bit.)
    But yeah, I don't think it has to do with any add-ons.

  • I don't know if this is a "crash," but Firefox is freezing, "not responding," very often over the past few days. What's the deal? Also, I am getting pop-ups recently, usually a game, associated with Firefox, and don't want them. How do I stop them?

    My details are in my question.

    Rename each file to end in .rtf, and then open TextEdit. Save three new documents to your desktop with the same name as each file the Finder reports as being in use, and then overwrite the existing documents. Throw away the TextEdit files.
    (11241)

  • Let's see, had to reboot modem many times over the past few days....

    ( message deleted  )

    Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Accessibility settings.
    *Tools > Options > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
    *http://kb.mozillazine.org/Website_colors_are_wrong
    *http://kb.mozillazine.org/Websites_look_wrong

  • I am on the Adobe Cloud, but for the past few days every time I attempt to open indesign I get the message missing plug-in Actions. RPLN, and the app will not open.

    I am on Adobe Cloud but over the past few days every time I try to open indesign I get the message that there is a missing plug-in Actions. RPLN, and the app will not open. Any ideas?

    Hi, when I try to open indesign itself this message comes up:
    Adobe Indesign cannot load the ACTIONS.RPLN plug-in. The plug-in requires
    the 10.1 version of indesign.. Please contact the vendor to get a
    compatible version of ACTIONS.RPLN.
    I am not able to click off the message to make the box disappear, so have
    to crash out.
    Paul

  • TS1717 I can't open iTunes. I'd been experiencing frequent freezes when I was using the iTunes store the past few days. What can I do to open iTunes?

    ? I can't open iTunes at all. When I hit the icon, it lights up but doesn't engage to open the program. The past few days I'd been experiencing frequent freezes when using the iTunes Store. Any ideas for how to open iTunes?

    I would copy over the entire thing if you have room.  With iTunes 10.4 though, you can download any previous iTunes purchases you have made in the past with your current iTunes account.  While in iTunes, look at the left hand side of your screen and select "Purchases" and look at the bottom right corner of the screen and select "Download Previous Purchases".  If you have an iPhone, iPod and/or iPad...you can do the same thing from each device.  Nice new feature...just remember that those ripped CDs need a back-up!!!  Enjoy...

  • Downloading images used to go automatically to the last folder used to save images, even when reopening Firefox. In just the past few days, possibly coinciding wih the most recent updates, the folder defaults to the 'Downloads' folder. This is most annoyi

    Downloading images used to go automatically to the last folder used to save images, even when reopening Firefox. In just the past few days, possibly coinciding wih the most recent updates, the folder defaults to the 'Downloads' folder. This is most annoying. What happened? Internet Explorer 8.0 did the same thing. This was one of the reasons why I started using Firefox to download all images. I went into Tools>Options and it only lets me set another folder. I dont want to set a specific folder I want it to always go to the last folder used. So what gives?
    == This happened ==
    Every time Firefox opened
    == possibly when the most recent updates were installed, a few days ago

    Thanks jscher 2000. I guess I didn't make it clear. "It restarts with all the addons activated, and resumes with the tabs that were open before closing it." IE, it's running fine now with all the extensions activated. Everything is OK now.
    So something in the Firefox code was causing the bad behavior. It's not essential that I find out what the problem was - I'm just curious. And if anybody else has this same problem, it might be nice to have it corrected at the source.

  • Hello, every one. Over the last few days I haven't been able to download any app from the app store. can any one help me, please?

    Over the last few days I haven't been able to download any app. can any one help me, please ? thank you.

    Andrea...
    You posted in the "Using Mac App Store" forum but your profile indicates you are using an iPad so that's what I'll try helping you with.
    On the iPad tap Settings > General > Reset > Reset Network Settings
    Then restart the iPad.  Hold the On/Off Sleep/Wake button down until the red slider appears. Slide your finger across the slider to turn off iPhone. To turn iPhone back on, press and hold the On/Off Sleep/Wake button until the Apple logo appears.
    If you still can't download apps, the problem may be your Wi-Fi connection >  iOS: Troubleshooting Wi-Fi networks and connections

  • The past few days my Mail app has started downloading multiple copies of e-mails from all pop servers.  This is only happening on my Macbook not other macs.  Deleting mail from server does not help. I ran ClamXav found 2 viruses deleted problem continues

    opps.  Long title there... The past few days my Mail app has started downloading multiple copies of e-mails from all pop servers.  This is only happening on my Macbook not other macs.  Deleting mail from server does not help. I ran ClamXav found 2 viruses deleted those.  Checked for software update and installed suggested downloads.  Problem still contintues.  Any suggestions?

    Folks,
    even after having repaired the inbox folder under "properties" a few times, I still had some e-mails where the contents are different from the subject line.
    In other words in the inbox there are two e-mails: one with subject line "abc", and another one with subject line "def".
    When I display the e-mail with the subject line "abc", the contents are from the e-mail with the subject line "def" in the in-basket.
    What else can be done to correct this problem?
    Thanks and best regards.
    Fred Kunz-Shirzad
    Chemin Ronzeures 6A
    1297 Founex VD
    Switzerland
    [email protected]

  • Already bought iWork. How do I get the App Store to recognize App purchases that I've made over the past few years?

    I know I'm not the only person experiencing this issue, but I can't find who else has a solution. Essentially, I've been buying Mac Apps over the past few years and using them frequently. Now the App Store exists. Awesome. But how do I get the App Store to understand that I have all those past purchases and serial numbers? I'd love to download the Apps through the App Store because it's a better system of downloading and updating apps, but that convenience isn't worth the extra $300-400 I'd spend re-downloading all those apps.
    Does anyone have any advice or experience with a work around to this?
    Thanks in advance.

    As Carolyn has told you, you cannot opt Apple apps that you have acquired from some other distribution stream into the MAS stream. Period. It does not work that way. It will not be working that way. And many folks have come here wanting it to work that way over the last seven months or so that the MAS has existed.
    If your End User License Agreement does not allow you to install the apps that you have on your new Mac, then the only way to get it today for the new Mac is to buy it from the MAS. The MAS apps use a different type of DRM and there are no serial numbers involved, they are tied to your Apple ID. If you are not ready at this time to purchase apps from the MAS then I would remove the apps from any older Macs and install them on the new Mac to transfer your EULA there. Then when a major paid upgrade becomes available in the future opt that app into the MAS by buying it through the MAS. That should be the only way to get the app in the future, Apple no longer is issuing boxed apps, just currently selling off any of the surviving stock.

  • The original 5 meters distance router in WiFi signal is full, but the beginning of the past few days more than 3 meters on the search to the WiFi signal, my own iPhone 5, iPhone 4S received signal is full, only iPad2 searching for less than the signal.

    The original 5 meters distance router in WiFi signal is full, but the beginning of the past few days more than 3 meters on the search to the WiFi signal, my own iPhone 5, iPhone 4S received signal is full, only iPad2 searching for less than the signal.

    The original 5 meters distance router in WiFi signal is full, but the beginning of the past few days more than 3 meters on the search to the WiFi signal, my own iPhone 5, iPhone 4S received signal is full, only iPad2 searching for less than the signal.

  • During CS5 master collection update, I get the error "There was an error downloading this update. Please quit and try again later." This has been happening for the past few days. Can someone help me getting my updates?

    During CS5 master collection update on Windows 7, 64-bit laptop, I get the error "There was an error downloading this update. Please quit and try again later." This has been happening for the past few days. Can someone help me getting my updates?

    Since CS5 is from 4+ years before the Cloud, this is not the right forum... but I don't really know a correct forum for that very old product
    Have you tried to manually update the individual programs?
    All updates start here and select product, read to see if you need to install updates in number order, or if the updates are cumulative for the individual product http://www.adobe.com/downloads/updates/

Maybe you are looking for

  • What's the difference between ACW and PCW?

    Hi Gurus, What's the difference between ACW (Application Controlled Workflow) and PCW (Process Controlled Workflow) ? I read that SRM 4.0 uses ACW and SRM 7.0 uses PCW. My current system is SRM 4.0 but I'm upgrading to SRM 7.0. What is the difference

  • When we go for BPM?

    BPM Team, Please can you give inputs when we go for BPM? Regards Swarna.

  • Opening a PDF File from WebDynpro

    Hello Everyone, I have a Webdynpro project and need to create a link on one of the views to display a .PDF document. 1.  Where should I store the PDF document within the webdynpro project? 2.  How do I open the PDF file? I've created a link with acti

  • Urgent MF60 Steploop Issue

    Hi, When I run the t-code MF60, I get a list of Materials for Staging. Now there is a step loop to select the materials which I want to see the Staging. Say, I select all materials (from the Select All Button) and when I click Stage > Individual Log,

  • Actually i have one doubt in message class

    Actually i have one doubt in message class. I want create message for following logic. If the records already exits in database table , whatever  input i will given in input fields like  entry type and material no ,it will need in message. i want ris