Slow client access

We are running Groupwise 8.02 on Netware 6.5 sp8. The Groupwise client access recently has been very slow (people have complained particularly about Calendar Access). This is our busy time of year where network use spikes normally but this year Groupwise has been an extreme issue. Another thing that could be a contributing factor is that we have recently install a SUSE Linux server with Novell Data Synchronizer. Currently there are only 6 or 7 people setup on this server.
The Post Office logs have a particular error that is repeated constantly to the effect of:
11:49:06 17B Notifying client at: 10.xx.xx.xx Connection socket 662 Bag ID 29096
I have never seen this message in the past and have no idea WHAT it is indicating. I am assuming that this may provide some idea what might be going on.
Any help would be appreciated!

It is normal - Caching mode client "bag" update.
It sounds more as if the volume that you PO is on has gone over 80%
full and you are therefore suffereing from a disk IO shortage.
T
On Fri, 10 Feb 2012 19:36:01 GMT, cfastner
<[email protected]> wrote:
>
>We are running Groupwise 8.02 on Netware 6.5 sp8. The Groupwise client
>access recently has been very slow (people have complained particularly
>about Calendar Access). This is our busy time of year where network use
>spikes normally but this year Groupwise has been an extreme issue.
>Another thing that could be a contributing factor is that we have
>recently install a SUSE Linux server with Novell Data Synchronizer.
>Currently there are only 6 or 7 people setup on this server.
>
>The Post Office logs have a particular error that is repeated
>constantly to the effect of:
>
>11:49:06 17B Notifying client at: 10.xx.xx.xx Connection socket 662 Bag
>ID 29096
>
>I have never seen this message in the past and have no idea WHAT it is
>indicating. I am assuming that this may provide some idea what might be
>going on.
>
>Any help would be appreciated!

Similar Messages

How to scroll up and down in IBM client access using windows 7 on mac running bootcamp

How to scrool up and down in Client Access 5250 (AS/400 emulator) using windows 7 on Mac running boot camp. The key board does not function within the client access 5250 session?

You can also share a printer between the Mac/PC as well as files and mounted Volumes, see the Tiger articles here
http://www.ifelix.co.uk/tech/
You may want to use Bonjour for Windows on your PC
http://www.apple.com/macosx/features/bonjour/
Then there are VNC clients for Mac/PC that also allow you to actually control the other machine, if they aren't in the same room and you just need to check something quick that can be handy, it's kind of slow though for regular use.
The main benefit of partitioning is being able to have different versions of bootable OS on them. You can try out Leopard on a new partition, while keeping your Tiger partition intact, you can have a XP/Vista partition for parallels or BootCamp, etc... other than that drives are pretty much fast enough, having smaller partitions probably won't realize any significant speed ups over searching the whole large drive.

Slow database access across network

I have a postgresql database setup on a server machine and have written a java program in netbeans that accesses it. The problem i have is that running the jar created by netbeans from any other machine on the network has really slow database access but running the program from netbeans itself is fine. Running the jar on the server machine is also fine.
Anyoner got any idea as to why this could be?
Tom

I don't know if this will help, I'm just wading into writing my own java apps to hit a SQL 2K db. We purchased a SQL2k/JSP driven backend on which we extended their OM to meet our needs. It was build as an extranet product but ran very poorly across the 'Net.
The biggest annoyance was not the actual transaction time of the app but the time it took from the end user to click a button and the start of the transaction.
After much testing I determined it was the JSP.
So what we have done to alieviate the issue is to have multiple regional Tomcats that 'throw' their transactions to a central colocation where the SQL servers sit (so the tomcats do the JSP managment in a sense locally to the end user) . For big clients we actually place a linux/tomcat box at the edge of their firewall. For whatever reason, I'm far too busy to determine the how now that I get the responses I need, this has completely eradicated the annoying pause between user interaction and the actual transaction to the DB server. Extended testing showed the SQL server running in the sub half second range to process a command but the tomcat rendering could take up to 2 to 5 seconds in worst case for no discernable reason. Moving the tomcat frontends to the network segment where the clients we solved it.
Of course I'm digging into swing now too and it has some slowness that the Eclipse zealots say SWT fixes but I haven't the depth or experience to properly judge the camps arguments yet.
hth...

Very very slow file access iSCSI NSS on SLES11/XEN/OES11

Hi,
Like many Novell customers while carrying out a hardware refresh we are moving off traditional Netware 6.5 to OES11 and at the same time virtualising our environment.
We have new Dell Poweredge 620 serves attached by 10gig iSCSI to Equalogic SAN
Installed SLES will all patches and updates and XEN and then created OES11 SP2 virtual machines, these connect to NSS volume by iSCSI
Migrated files from traditional netware server to new hardware and stated testing and ran into very very slow files access times
A 3.5mb pdf file takes close to 10 minutes to open from local PC with Novell Client installed, same if no client and open via cifs. Opening same file off traditional NW6.5 server takes 3-4 seconds.
We have had a case open with Novell for almost 2 months but they are unable to resolve.
To test other options we installed VMWare ESXi on the internal usb flash drive and booted off that, created same OES11 VM and connected to NSS on SAN and same pdf open in seconds.
The current stack of SLES11/XEN/OES11 is not able to be put into production
Any ideas where the bottleneck might be? We think is in XEN.
Thanks

Originally Posted by idgandrewg
Waiting for support to tell me what the implications are of this finding and best way to fix
Hi,
As also mentioned in the SUSE forums, there is the option of using the Equallogic Hit Kit. One of the tools, next to the great autoconfigure options it has, is the eqltune tool.
Some of the stuff that I've found important:
-gro is known read performance killer. Switch if off on the iSCSI interfaces.
- if possible (meaning you have decent hardware), disable flowcontrol as this generally offers stability but at the cost of performance. If your hardware is decent, this form of traffic control should not be needed.
-To have multipath work correctly over iSCSI and starting SLES 11 SP1. Make sure kernel routing and arp handling are set correctly (not directly relevant if you only have 1 10 GB link):
net.ipv4.conf.[iSCSI interfaceX name].arp_ignore = 1
net.ipv4.conf.[iSCSI interfaceX name].arp_announce = 2
net.ipv4.conf.[iSCSI interfaceX name].rp_filter = 2
Test if traffic is actively routed over both iSCSI interfaces:
ping -I [iSCSI interfaceX name] [iSCSI Group IP EQL]
-Make sure network buffers etc are adequately set as recommended by Dell (set in /etc/sysctl.conf):
#NetEyes Increase network buffer sizes for iSCSI
net.core.rmem_max = 16777216
net.core.wmem_max = 16777216
net.ipv4.tcp_rmem = 8192 87380 16777216
net.ipv4.tcp_wmem = 4096 65536 16777216
net.core.wmem_default = 262144
net.core.rmem_default = 262144
-Settings for the /etc/iscsi/iscsid.conf I'm using:
node.startup = automatic # <--- review and set according to environment
node.session.timeo.replacement_timeout = 60
node.conn[0].timeo.login_timeout = 15
node.conn[0].timeo.logout_timeout = 15
node.conn[0].timeo.noop_out_interval = 5
node.conn[0].timeo.noop_out_timeout = 5
node.session.err_timeo.abort_timeout = 15
node.session.err_timeo.lu_reset_timeout = 20 #Default is 30
node.session.err_timeo.tgt_reset_timeout=20 #Default is 30
node.session.initial_login_retry_max = 12 # Default is 4
node.session.cmds_max = 1024 #< --- Default is 128
node.session.queue_depth = 128 #< --- Default is 32
node.session.iscsi.InitialR2T = No
node.session.iscsi.ImmediateData = Yes
node.session.iscsi.FirstBurstLength = 262144
node.session.iscsi.MaxBurstLength = 16776192
node.conn[0].iscsi.MaxRecvDataSegmentLength = 131072 #A lower value improves latency at the cost of higher IO throughput
discovery.sendtargets.iscsi.MaxRecvDataSegmentLeng th = 32768
node.session.iscsi.FastAbort = No # < --- default is Yes
-Have Jumbo frames configured on the iSCSI interfaces & iSCSI switch.
If you are using multipathd instead of the dm-switch provided with the Equallogic Hit kit, make sure the /etc/multipath.conf holds the optimal settings for the Equallogic arrays.
Ever since Xen with SLES 11 SP1 we have been seeing strong performing virtual servers. We still use 1GB connections (two 1GB connections for each server, serving upto 180~190Mb/s).
There could be a difference with the 10GB setup, where multipath is not really needed or used (depending on the scale of your setup). One important thing is that the iSCSI switches are doing their thing correctly. But seeing you've already found better results tuning network parameters on the Xen host, seems to indicate that's ok.
Cheers,
Willem

Exchange 2013 - Client Access - Wrong Servername

Hi,
i have 4 exchange servers running, 2x Client Access, 2x MAilbox with DAG.
i configured the external URL on all virtual directories and outlook anywhere to cas.contoso.com
the internal url is cas01.contoso.com and cas02.contoso.com.
All Clients connect from outside the company, so the internal url doesn't matter.
When i client connects from outside, it's very slow. I saw on the firewall, that outlook is trying to connect to cas01 or cas02.contoso.com and then gives up and go to cas.contoso.com which is right.
how can i check, why outlook is trying to access the servers instead of the alias cas.contoso.com ?
cas.contoso.com points to KEMP Load balancers which distribute the load to the two Client access servers.

hi,
we have no internal traffic, all clients connects from external sources.
anyway, i changed all URL's to the external URL now, for OWA, ECP, EWS and Outlook Anywhere.
I created a new outlook profile and it still tries the internal URL first.
BTW: the internal URL is also a public IP address but firewalled POrt 443, only the cas.contoso.com IP is open on 443.
So the internal Hostnames are DNS resolvable on the internet? If so, that is not what you want to do. Make only the external Host name resolvable.
Twitter!:
Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.
Well, the hole system is resolvable on the Internet, i can switch them to https://localhost/...
but in my case, i switched everything from cas01 or cas02 to cas and outlook still shows up with
cas01.contoso.com connecting....
cas.contoso.com conneted...
where does this client get cas01.contoso.com from ?!

Installation of Client Access role fails on Windows Server 2008 R2 (Execution of: "$error.Clear(); Install-ExchangeCertificate -services "IIS, POP, IMAP")

Hello
I am trying to install Exchange Server 2010 beta 1 onto a Windows Server 2008 R2 (build 7000) machine which has also been set up as a domain controller.
However when attempting to install the Client Access role, setup fails with the error below.
Does anyone know of a way to get around this please?
I have already searched for this error and not found any similar threads.
Also every time I press the code button on this forum it crashes the browser and I keep losing the message! (IE8 from within Server R2). Also the message box is very small, will not expand and keeps jumping to the top.
Thanks
Robin
[code]
Summary: 4 item(s). 1 succeeded, 1 failed.
Elapsed time: 00:00:01
Preparing Setup
Completed
Elapsed Time: 00:00:00
Client Access Role
Failed
Error:
The execution of: "$error.Clear(); Install-ExchangeCertificate -services "IIS, POP, IMAP" -DomainController $RoleDomainController", generated the following error: "Could not grant Network Service access to the certificate with thumbprint 2F320F5D5B5C6873E54C8AB57F604D8AFA31D18C because a cryptographic exception was thrown.".
Could not grant Network Service access to the certificate with thumbprint 2F320F5D5B5C6873E54C8AB57F604D8AFA31D18C because a cryptographic exception was thrown.
Access is denied.
Elapsed Time: 00:00:01
Mailbox Role
Cancelled
Finalizing Setup
Cancelled
[/code]
Robin Wilson

Hello
Thanks for all the replies.
I have since wiped the system and installed everything again and it all worked this time so not sure what was wrong last time. I did try to uninstall all Exchange components and then uninstall IIS and Application server, reboot and re-install but I received the same error still when it came to installing the client access role.
Walter: I just attempted the standard installation which should have used the default self-signed certificate. Everything was a fresh install done at the same time on a freshly formatted PC.
For info last time when it failed to work:
- Installed Windows Server 2008 R2
- Installed Domain Controller role using dcpromo. I set the forest and domain as Windows Server 2008 R2
- Added a forest trust between main domain and test Exchange domain (set up as ex2010.local)
- Installed IIS and Application Server role
- Installed Hyper-v role
- Installed Desktop Experience feature
- Installed Exchange and recieved the error
When it worked I set up the forest and domain in Windows Server 2008 mode (i.e. not R2), installed Exchange first and then set up the forest trust and then Hyper-v. It did say it failed to configure dns which was probably because it started trying to do automatic updates half way through the dcpromo! DNS seems to work ok though.
I did notice this time that Hyper-v gave a warning about the virtual network adapter not being set up correctly and the local network did not work correctly although I could access the internet. Not sure if this could have been related to the cause of the problem previously. For now I have disabled the virtual network until I get time to try and get it working and so the mail will work in the meantime.
I also noticed that Hyper-v added an extra 443 ssl binding to the default website so as it had 2 bindings on port 443 it refused to start. After deleting one it worked.
I decided to install Exchange onto a domain controller as it is only a test and I wouldn't do it in a live environment. I am also short of test machines! It didn't give me any warnings about this actually, I think previous versions warn you that it is not recommended.
Andreas and Chinthaka: I did not know about the requirement to run the domain at 2003 mode. The main domain is running in 2008 mode with Exchange 2007 so I assume this is just a temporary beta related requirement. It does seem to be working (second attempt) so far in a 2008 mode domain although I haven't had a chance to fully test it yet.
Thanks
Robin
P.S. Sorry it's taken me a while to reply!
Robin Wilson

EMC Crash when i try to - reset client access virtual directory

Hi All,
I have one exchagne server 2010 sp3 rollup 7 installed on server 2012R2 Std.
When i try to reset client access virtual directory the MMC is crashing.
In the event viewer i can find 3 error after to crash:
1.
The program mmc.exe version 6.3.9600.17415 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
Process ID: 2360
Start Time: 01d04e7b531a4a0d
Termination Time: 4294967295
Application Path: C:\Windows\system32\mmc.exe
Report Id: 69db84d3-ba91-11e4-80c3-0050569b5787
Faulting package full name:
Faulting package-relative application ID:
2.
Application: mmc.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.Reflection.TargetInvocationException
Stack:
at Microsoft.ManagementConsole.Executive.MmcThreadMessageWindow.OnThreadException(Exception e)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(IntPtr dwComponentID, Int32 reason, Int32 pvLoopData)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
at Microsoft.ManagementConsole.Internal.SnapInMessagePumpProxy.Microsoft.ManagementConsole.Internal.ISnapInMessagePumpProxy.Run()
at Microsoft.ManagementConsole.Executive.SnapInThread.OnThreadStart()
at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object)
at System.Threading.ThreadHelper.ThreadStart()
3.
Faulting application name: mmc.exe, version: 6.3.9600.17415, time stamp: 0x54504e26
Faulting module name: KERNELBASE.dll, version: 6.3.9600.17415, time stamp: 0x54505737
Exception code: 0xe0434352
Fault offset: 0x0000000000008b9c
Faulting process id: 0x2014
Faulting application start time: 0x01d04e9e432feaef
Faulting application path: C:\Windows\system32\mmc.exe
Faulting module path: C:\Windows\system32\KERNELBASE.dll
Report Id: b8276755-ba91-11e4-80c3-0050569b5787
Faulting package full name:
Faulting package-relative application ID:
When i try to preform the task from EMC that installed on my PC (Win 7 SP1 x64) everything works fine
Thank you.

Hi Eliran,
Thank you for your question.
Are there any update recently?
We could refer to the following steps to troubleshoot:
1)disable A/V
2) Run: DISM.exe /Online /Cleanup-image /Restorehealth
http://support.microsoft.com/kb/947821/en-gb
3) follow http://support.microsoft.com/kb/929833/en-gb to upload %WinDir%\Logs\CBS\CBS.log
4) disable snap-ins exept DNS-snapin
5) run SDP
6) enable A/V
We could also re-install .Net 4.0 to check if the issue persist by the following link:
http://www.microsoft.com/en-us/download/details.aspx?id=17718
If the issue persist, we could install Exchange 2010 SP3 CU8 by the following link:
http://www.microsoft.com/en-us/download/details.aspx?id=45225
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim

[Fwd: Client accessing MBeanHome for more than one domain receives SecurityException]

Fwd'ing to security newsgroup
-------- Original Message --------
Subject: Client accessing MBeanHome for more than one domain receives
SecurityException
Date: 4 Mar 2004 07:27:33 -0800
From: Dinesh Bhat <[email protected]>
Reply-To: Dinesh Bhat <[email protected]>
Organization: BEA NEWS SITE
Newsgroups: weblogic.developer.interest.management
Hi,
When a client accesses MBeans of more than one domains (Weblogic 8.1)
that have
different passwords, it receives a SecurityException. This occurs when
the MBeanHome
for each domain is looked up at initialization and reused for each
request ( to
access MBeans ). The security exception does not occur if the MBeanHome
for each
domain is looked up for each request. On initial review, this behavoir
seems inconsistent.
Looking up the MBeanHome for each request may introduce a significant
overhead.
I am not sure if concurrent lookups would also cause the same problem.
I have read on another post that we can work around this problem by
establishing
a trust relationship between the servers, but this may not be feasible
when one
is monitoring a lot of servers and the overhead of configuration may be
an issue.
I have attached code that can reproduce the problem.
Please advise on the correct approach.
Thanks
Dinesh Bhat
Panacya Inc.
import java.util.ArrayList;
import java.util.Set;
import java.util.HashMap;
import java.util.Iterator;
import java.util.Hashtable;
import javax.management.MBeanServer;
import javax.naming.Context;
import weblogic.jndi.Environment;
import weblogic.management.MBeanHome;
* This class reproduces the Security Exception that is caused when a client tries to access
* MBeans of more than one domain with different weblogic passwords. Here is the stacktrace of the
* exception
* java.lang.SecurityException: [Security:090398]Invalid Subject: principals=[weblogic, Administrators]
     at weblogic.rjvm.BasicOutboundRequest.sendReceive(BasicOutboundRequest.java:108)
     at weblogic.rmi.internal.BasicRemoteRef.invoke(BasicRemoteRef.java:138)
     at weblogic.management.internal.AdminMBeanHomeImpl_811_WLStub.getDomainName(Unknown Source)
     at WLSecurityTest.getWeblogicInfo(WLSecurityTest.java:140)
     at WLSecurityTest.runTest(WLSecurityTest.java:75)
     at WLSecurityTest.<init>(WLSecurityTest.java:66)
     at WLSecurityTest.main(WLSecurityTest.java:51)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.intellij.rt.execution.application.AppMain.main(Unknown Source)
Caused by: java.lang.SecurityException: [Security:090398]Invalid Subject: principals=[weblogic, Administrators]
     at weblogic.security.service.SecurityServiceManager.seal(SecurityServiceManager.java:682)
     at weblogic.rjvm.MsgAbbrevInputStream.getSubject(MsgAbbrevInputStream.java:181)
     at weblogic.rmi.internal.BasicServerRef.acceptRequest(BasicServerRef.java:814)
     at weblogic.rmi.internal.BasicServerRef.dispatch(BasicServerRef.java:299)
     at weblogic.rjvm.RJVMImpl.dispatchRequest(RJVMImpl.java:920)
     at weblogic.rjvm.RJVMImpl.dispatch(RJVMImpl.java:841)
     at weblogic.rjvm.ConnectionManagerServer.handleRJVM(ConnectionManagerServer.java:222)
     at weblogic.rjvm.ConnectionManager.dispatch(ConnectionManager.java:794)
     at weblogic.rjvm.t3.T3JVMConnection.dispatch(T3JVMConnection.java:570)
     at weblogic.socket.NTSocketMuxer.processSockets(NTSocketMuxer.java:105)
     at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:32)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
* Note: the exception is caused only when the MBeanHome for each domain is cached and used for subsequent
* transactions. The exception does not occur if the MBeanHome for each domain is looked up for each transaction. This
* would significant overhead in practice. Also the transactions across the various domains occurs serially, hence
* the effect of concurrent lookups has to be tested.
* Usage:
* This class has been tested with weblogic 8.1
* The class needs weblogic.jar in its classpath
* One can specify the weblogic details as System properties. The properties need to be specified in
* the following format:
* wls.host.n, wls.userId.n, wls.password.n where n is the weblogix instance number. Also specify
* the boolean system property reconnect.each.iteration to toggle between reconnecting or not reconnecting
* for each iteration. When not reconnecting for each iteration, the MBeanHome is reused and the Security Exception
* occurs.
* Following is the example of system properties
* -Dwls.host.0=localhost:7001 -Dwls.userId.0=weblogic -Dwls.password.0=weblogic
* -Dwls.host.1=localhost:7011 -Dwls.userId.1=weblogic -Dwls.password.1=weblogic1
* -Dwls.host.2=localhost:7021 -Dwls.userId.2=weblogic -Dwls.password.2=weblogic2
* -Dreconnect.each.iteration=false
public class WLSecurityTest
ArrayList wlsDetailsList = new ArrayList();
HashMap connectionMap = new HashMap();
public static void main(String[] args)
try
WLSecurityTest wlSecurityTest = new WLSecurityTest();
catch (Exception e)
e.printStackTrace();
* Constructor
* @throws Exception
public WLSecurityTest() throws Exception
int noOfTries = 10;
getWLSDetails();
for( int i=0; i <= noOfTries; i++)
runTest();
* Runs the test
private void runTest()
for (int i = 0; i < wlsDetailsList.size(); i++)
WLSDetails wlsDetails = (WLSDetails) wlsDetailsList.get(i);
getWeblogicInfo(wlsDetails);
* Get Weblogic details from System properties
* @throws Exception
private void getWLSDetails() throws Exception
wlsDetailsList = new ArrayList();
String hostKeyTmpl = "wls.host";
String userIdKeyTmpl = "wls.userId";
String passwordKeyTmpl = "wls.password";
boolean done = false;
for (int i = 0; !done; i++)
WLSDetails wlsDetails = new WLSDetails();
String hostKey = hostKeyTmpl + "." + Integer.toString(i);
String userIdKey = userIdKeyTmpl + "." + Integer.toString(i);
String passwordKey = passwordKeyTmpl + "." + Integer.toString(i);
wlsDetails.hostName = System.getProperty(hostKey);
done = (wlsDetails.hostName == null) || (wlsDetails.hostName.length() == 0);
if (!done)
wlsDetails.userId = System.getProperty(userIdKey);
wlsDetails.password = System.getProperty(passwordKey);
connect(wlsDetails);
wlsDetailsList.add(wlsDetails);
* Lookup the MBeanHome for the specified weblogic server
* @param wlsDetails
* @throws Exception
public synchronized void connect(WLSecurityTest.WLSDetails wlsDetails) throws Exception
Context ctx = null;
MBeanHome mbHomeLocal = null;
try
Environment env = new Environment();
env.setProviderUrl("t3://" + wlsDetails.hostName);
env.setSecurityPrincipal(wlsDetails.userId);
env.setSecurityCredentials(wlsDetails.password);
Hashtable hashtable = env.getProperties();
System.out.println(hashtable.toString());
ctx = env.getInitialContext();
wlsDetails._mBeanHome = (MBeanHome) ctx.lookup(MBeanHome.ADMIN_JNDI_NAME);
catch (Exception e)
e.printStackTrace();
* Gets weblogic information using MBeans
* @param wlsDetails
public synchronized void getWeblogicInfo(WLSDetails wlsDetails)
try
boolean reconnectEachIteration =
Boolean.getBoolean("reconnect.each.iteration");
if( (reconnectEachIteration) || ((wlsDetails._mBeanHome == null) && (!reconnectEachIteration) ))
connect(wlsDetails);
MBeanHome mbHomeLocal = wlsDetails._mBeanHome;
String domainName = mbHomeLocal.getDomainName();
Set allMBeans = mbHomeLocal.getAllMBeans();
System.out.println("Size: " + allMBeans.size());
Set clusterMBeans = mbHomeLocal.getMBeansByType("Cluster", domainName);
System.out.println(clusterMBeans);
MBeanServer mBeanServer = mbHomeLocal.getMBeanServer();
catch (Exception ex)
ex.printStackTrace();
* Class that holds weblogic server details
class WLSDetails
String hostName = "";
String userId = "";
String password = "";
MBeanHome _mBeanHome = null;

If Server version is 61.
Make user "system" password of all weblogic servers same.
If Server version above 61(70,81)
In the Security Advanced Settings un check generated credential and specify a common credentail for all the weblogic servers(domains).

How do I find the MAC address of a CLIENT ACCESS POINT created from the FILE SERVICES ROLE

I have several Client Access Points created within the clustered File Services Role. The only way I seem to be able to determine the MAC address of each of these, is by visiting the DHCP server.
Does anyone know if there is a way of reporting on this from the server (active node) itself? I have tried ipconfig all, checked the properties of the CAP in the FCS console etc.
Many thanks.
Kathleen Hayhurst Senior IT Support Analyst

Hi,
As far as I know there have no original option for query all the CAP MAC address, may you can create a PowerShell command then filter the configuration result, you can ask
in PowerShell forum for the further help.
More information:
PowerShell forum:
http://social.technet.microsoft.com/Forums/en-US/bf0e249b-a9f3-4bef-a536-c210b3f09340/powershell-script-to-alert-on-failed-system-state-backups?forum=winserverpowershell
The related KB:
Failover Clusters Cmdlets in Windows PowerShell
http://technet.microsoft.com/en-us/library/hh847239.aspx
The related article:
PowerShell for Failover Clustering: Frequently Asked Questions & Enabling CSV
http://blogs.msdn.com/b/clustering/archive/2009/05/23/9636665.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

RV042 VPN Client Access not able to connect two users at same time

I have a RV042 and have set it up for VPN Client access using the QuickVPN client to connect my remote users. I discovered today that I cannot have two users connect in at the same time. Both users are in the same remote office. They can connect individually with no problem but if one is connected and the other tries connect also the second user gets a message the gateway is not responding. They are both running WinXPPRo SP3. Any help is greatly appreciated.

Were your QuickVPN clients behind a firewall router of some sort? For multiple QuickVPN clients to be able to connect to the remote RV042 at the same time, the local firewall router must have VPN Passthrough correctly implemented. You could try using a RV042 as the firewall router for your QuickVPN clients and you should be able to maintain 2 tunnels at the same time to the remote RV042.

REMOTE DESKTOP SERVICES CLIENT ACCESS LICENSES FOR MICROSOFT WINDOWS SERVER 2012 STANDARD AND DATACENTER

I am using a window 7 professional service pack 1 and I purchase REMOTE DESKTOP SERVICES CLIENT ACCESS LICENSES FOR MICROSOFT WINDOWS SERVER 2012 STANDARD AND DATACENTER. but the seller did not send me any installation CD or instruction
on how to use it.
Please how can I use it on my window 7 professional service pack 1.
Thank you.

Though Bill is absolutely correct for most CALs, Remote Desktop Services does have its own special licensing server. I haven't installed one on 2012, yet, but here is a step-by-step guide for 2008.
http://technet.microsoft.com/en-us/library/dd983943(v=ws.10).aspx
Here is a lab guide for 2012 -
http://technet.microsoft.com/en-us/library/jj134160.aspx
But, the explanation of your environment begs the question - what are you trying to do? You say you have a desktop OS and you are talking about Windows Server products. In that light, your question does not make a lot of sense.
. : | : . : | : . tim

AnyConnect error " User not authorized for AnyConnect Client access, contact your administrator"

Hi everyone,
it's probably just me but I have tried real hard to get a simple AnyConnect setup working in a lab environment on my ASA 5505 at home, without luck. When I connect with the AnyConnect client I get the error message "User not authorized for AnyConnect Client access, contact your administrator". I have searched for this error and tried some of the few solutions out there, but to no avail. I also updated the ASA from 8.4.4(1) to 9.1(1) and ASDM from 6.4(9) to 7.1(1) but still the same problem. The setup of the ASA is straight forward, directly connected to the Internet with a 10.0.1.0 / 24 subnet on the inside and an address pool of 10.0.2.0 / 24 to assign to the VPN clients. Please note that due to ISP restrictions, I'm using port 44455 instead of 443. I had AnyConnect working with the SSL portal, but IKEv2 IPsec is giving me a headache. I have stripped down certificate authentication which I had running before just to eliminate this as a potential cause of the issue. When running debugging, I do not get any error messages - the handshake completes successfully and the local authentication works fine as well.
Please find the current config and debugging output below. I appreciate any pointers as to what might be wrong here.
: Saved
ASA Version 9.1(1)
hostname ASA
domain-name ingo.local
enable password ... encrypted
xlate per-session deny tcp any4 any4
xlate per-session deny tcp any4 any6
xlate per-session deny tcp any6 any4
xlate per-session deny tcp any6 any6
xlate per-session deny udp any4 any4 eq domain
xlate per-session deny udp any4 any6 eq domain
xlate per-session deny udp any6 any4 eq domain
xlate per-session deny udp any6 any6 eq domain
passwd ... encrypted
names
name 10.0.1.0 LAN-10-0-1-x
dns-guard
ip local pool VPNPool 10.0.2.1-10.0.2.10 mask 255.255.255.0
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif Internal
security-level 100
ip address 10.0.1.254 255.255.255.0
interface Vlan2
nameif External
security-level 0
ip address dhcp setroute
regex BlockFacebook "facebook.com"
banner login This is a monitored system. Unauthorized access is prohibited.
boot system disk0:/asa911-k8.bin
ftp mode passive
clock timezone PST -8
clock summer-time PDT recurring
dns domain-lookup Internal
dns domain-lookup External
dns server-group DefaultDNS
name-server 10.0.1.11
name-server 75.153.176.1
name-server 75.153.176.9
domain-name ingo.local
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network LAN-10-0-1-x
subnet 10.0.1.0 255.255.255.0
object network Company-IP1
host xxx.xxx.xxx.xxx
object network Company-IP2
host xxx.xxx.xxx.xxx
object network HYPER-V-DUAL-IP
range 10.0.1.1 10.0.1.2
object network LAN-10-0-1-X
access-list 100 extended permit tcp any4 object HYPER-V-DUAL-IP eq 3389 inactive
access-list 100 extended permit tcp object Company-IP1 object HYPER-V-DUAL-IP eq 3389
access-list 100 extended permit tcp object Company-IP2 object HYPER-V-DUAL-IP eq 3389
tcp-map Normalizer
check-retransmission
checksum-verification
no pager
logging enable
logging timestamp
logging list Threats message 106023
logging list Threats message 106100
logging list Threats message 106015
logging list Threats message 106021
logging list Threats message 401004
logging buffered errors
logging trap Threats
logging asdm debugging
logging device-id hostname
logging host Internal 10.0.1.11 format emblem
logging ftp-bufferwrap
logging ftp-server 10.0.1.11 / asa *****
logging permit-hostdown
mtu Internal 1500
mtu External 1500
ip verify reverse-path interface Internal
ip verify reverse-path interface External
icmp unreachable rate-limit 1 burst-size 1
icmp deny any echo External
asdm image disk0:/asdm-711.bin
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
object network obj_any
nat (Internal,External) dynamic interface
object network LAN-10-0-1-x
nat (Internal,External) dynamic interface
object network HYPER-V-DUAL-IP
nat (Internal,External) static interface service tcp 3389 3389
access-group 100 in interface External
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa-server radius protocol radius
aaa-server radius (Internal) host 10.0.1.11
key *****
radius-common-pw *****
user-identity default-domain LOCAL
aaa authentication ssh console radius LOCAL
http server enable
http LAN-10-0-1-x 255.255.255.0 Internal
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec ikev2 ipsec-proposal DES
protocol esp encryption des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal 3DES
protocol esp encryption 3des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES
protocol esp encryption aes
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES192
protocol esp encryption aes-192
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES256
protocol esp encryption aes-256
protocol esp integrity sha-1 md5
crypto ipsec security-association pmtu-aging infinite
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev2 ipsec-proposal AES256 AES192 AES 3DES DES
crypto map External_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map External_map interface External
crypto ca trustpoint srv01_trustpoint
enrollment terminal
crl configure
crypto ca trustpoint asa_cert_trustpoint
keypair asa_cert_trustpoint
crl configure
crypto ca trustpoint LOCAL-CA-SERVER
keypair LOCAL-CA-SERVER
crl configure
crypto ca trustpool policy
crypto ca server
cdp-url http://.../+CSCOCA+/asa_ca.crl:44435
issuer-name CN=...
database path disk0:/LOCAL_CA_SERVER/
smtp from-address ...
publish-crl External 44436
crypto ca certificate chain srv01_trustpoint
certificate <output omitted>
quit
crypto ca certificate chain asa_cert_trustpoint
certificate <output omitted>
quit
crypto ca certificate chain LOCAL-CA-SERVER
certificate <output omitted>
quit
crypto ikev2 policy 1
encryption aes-256
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 10
encryption aes-192
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 20
encryption aes
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 30
encryption 3des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 40
encryption des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 enable External client-services port 44455
crypto ikev2 remote-access trustpoint asa_cert_trustpoint
telnet timeout 5
ssh LAN-10-0-1-x 255.255.255.0 Internal
ssh xxx.xxx.xxx.xxx 255.255.255.255 External
ssh xxx.xxx.xxx.xxx 255.255.255.255 External
ssh timeout 5
ssh version 2
console timeout 0
no vpn-addr-assign aaa
no ipv6-vpn-addr-assign aaa
no ipv6-vpn-addr-assign local
dhcpd dns 75.153.176.9 75.153.176.1
dhcpd domain ingo.local
dhcpd option 3 ip 10.0.1.254
dhcpd address 10.0.1.50-10.0.1.81 Internal
dhcpd enable Internal
threat-detection basic-threat
threat-detection scanning-threat shun except ip-address LAN-10-0-1-x 255.255.255.0
threat-detection statistics access-list
threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200
dynamic-filter use-database
dynamic-filter enable interface Internal
dynamic-filter enable interface External
dynamic-filter drop blacklist interface Internal
dynamic-filter drop blacklist interface External
ntp server 128.233.3.101 source External
ntp server 128.233.3.100 source External prefer
ntp server 204.152.184.72 source External
ntp server 192.6.38.127 source External
ssl encryption aes256-sha1 aes128-sha1 3des-sha1
ssl trust-point asa_cert_trustpoint External
webvpn
port 44433
enable External
dtls port 44433
anyconnect image disk0:/anyconnect-win-3.1.02026-k9.pkg 1
anyconnect profiles profile1 disk0:/profile1.xml
anyconnect enable
smart-tunnel list SmartTunnelList1 mstsc mstsc.exe platform windows
smart-tunnel list SmartTunnelList1 putty putty.exe platform windows
group-policy DfltGrpPolicy attributes
vpn-tunnel-protocol ikev1 ikev2 l2tp-ipsec ssl-client ssl-clientless
webvpn
anyconnect profiles value profile1 type user
username write.ingo password ... encrypted
username ingo password ... encrypted privilege 15
username tom.tucker password ... encrypted
class-map TCP
match port tcp range 1 65535
class-map type regex match-any BlockFacebook
match regex BlockFacebook
class-map type inspect http match-all BlockDomains
match request header host regex class BlockFacebook
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 1500
id-randomization
policy-map TCP
class TCP
set connection conn-max 1000 embryonic-conn-max 1000 per-client-max 250 per-client-embryonic-max 250
set connection timeout dcd
set connection advanced-options Normalizer
set connection decrement-ttl
policy-map type inspect http HTTP
parameters
protocol-violation action drop-connection log
class BlockDomains
policy-map global_policy
class inspection_default
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect dns preset_dns_map dynamic-filter-snoop
inspect http HTTP
service-policy global_policy global
service-policy TCP interface External
smtp-server 199.185.220.249
privilege cmd level 3 mode exec command perfmon
privilege cmd level 3 mode exec command ping
privilege cmd level 3 mode exec command who
privilege cmd level 3 mode exec command logging
privilege cmd level 3 mode exec command failover
privilege cmd level 3 mode exec command vpn-sessiondb
privilege cmd level 3 mode exec command packet-tracer
privilege show level 5 mode exec command import
privilege show level 5 mode exec command running-config
privilege show level 3 mode exec command reload
privilege show level 3 mode exec command mode
privilege show level 3 mode exec command firewall
privilege show level 3 mode exec command asp
privilege show level 3 mode exec command cpu
privilege show level 3 mode exec command interface
privilege show level 3 mode exec command clock
privilege show level 3 mode exec command dns-hosts
privilege show level 3 mode exec command access-list
privilege show level 3 mode exec command logging
privilege show level 3 mode exec command vlan
privilege show level 3 mode exec command ip
privilege show level 3 mode exec command failover
privilege show level 3 mode exec command asdm
privilege show level 3 mode exec command arp
privilege show level 3 mode exec command ipv6
privilege show level 3 mode exec command route
privilege show level 3 mode exec command ospf
privilege show level 3 mode exec command aaa-server
privilege show level 3 mode exec command aaa
privilege show level 3 mode exec command eigrp
privilege show level 3 mode exec command crypto
privilege show level 3 mode exec command ssh
privilege show level 3 mode exec command vpn-sessiondb
privilege show level 3 mode exec command vpnclient
privilege show level 3 mode exec command vpn
privilege show level 3 mode exec command dhcpd
privilege show level 3 mode exec command blocks
privilege show level 3 mode exec command wccp
privilege show level 3 mode exec command dynamic-filter
privilege show level 3 mode exec command webvpn
privilege show level 3 mode exec command service-policy
privilege show level 3 mode exec command module
privilege show level 3 mode exec command uauth
privilege show level 3 mode exec command compression
privilege show level 3 mode configure command interface
privilege show level 3 mode configure command clock
privilege show level 3 mode configure command access-list
privilege show level 3 mode configure command logging
privilege show level 3 mode configure command ip
privilege show level 3 mode configure command failover
privilege show level 5 mode configure command asdm
privilege show level 3 mode configure command arp
privilege show level 3 mode configure command route
privilege show level 3 mode configure command aaa-server
privilege show level 3 mode configure command aaa
privilege show level 3 mode configure command crypto
privilege show level 3 mode configure command ssh
privilege show level 3 mode configure command dhcpd
privilege show level 5 mode configure command privilege
privilege clear level 3 mode exec command dns-hosts
privilege clear level 3 mode exec command logging
privilege clear level 3 mode exec command arp
privilege clear level 3 mode exec command aaa-server
privilege clear level 3 mode exec command crypto
privilege clear level 3 mode exec command dynamic-filter
privilege cmd level 3 mode configure command failover
privilege clear level 3 mode configure command logging
privilege clear level 3 mode configure command arp
privilege clear level 3 mode configure command crypto
privilege clear level 3 mode configure command aaa-server
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:41a021a28f73c647a2f550ba932bed1a
: end
Many thanks,
Ingo

Hi Jose,
here is what I got now:
ASA(config)# sh run | begin tunnel-group
tunnel-group DefaultWEBVPNGroup general-attributes
address-pool VPNPool
authorization-required
and DAP debugging still the same:
ASA(config)# DAP_TRACE: DAP_open: CDC45080
DAP_TRACE: Username: tom.tucker, aaa.cisco.grouppolicy = DfltGrpPolicy
DAP_TRACE: Username: tom.tucker, aaa.cisco.username = tom.tucker
DAP_TRACE: Username: tom.tucker, aaa.cisco.username1 = tom.tucker
DAP_TRACE: Username: tom.tucker, aaa.cisco.username2 =
DAP_TRACE: Username: tom.tucker, aaa.cisco.tunnelgroup = DefaultWEBVPNGroup
DAP_TRACE: Username: tom.tucker, DAP_add_SCEP: scep required = [FALSE]
DAP_TRACE: Username: tom.tucker, DAP_add_AC:
endpoint.anyconnect.clientversion="3.1.02026";
endpoint.anyconnect.platform="win";
DAP_TRACE: Username: tom.tucker, dap_aggregate_attr: rec_count = 1
DAP_TRACE: Username: tom.tucker, Selected DAPs: DfltAccessPolicy
DAP_TRACE: Username: tom.tucker, DAP_close: CDC45080
Unfortunately, it still doesn't work. Hmmm.. maybe a wipe of the config and starting from scratch can help?
Thanks,
Ingo

No new mail notification in Outlook - CAS Exchange RPC Client Access problem

Hi, we're facing this problem:
Users start complaining they suddenly don’t receive new mail notifications in Outlook (2010/2013) anymore
Inbox does not show the new mail either
When the user changes folders in outlook, the new mail does show in the Inbox folder
Restarting Outlook shows the new mail as well.
The same new e-mail arrives instantly (with notifications) in Owa and on mobile devices
Sometimes the new mail notification pops up after a longer period of time (from 30 seconds to 10 minutes). But more often not at all.
This issue seems to occur at random. We’ve been problem free for a week, and sometimes it comes back three times a day.
Clients running Outlook 2010, 2013 cached or online, on site and off site. So it seems server related, not client.
It was seen first around January 8th. We did not make any changes around that time that we can link to this problem.
Only one CAS server (EXCH1-RTD) shows this issue. CAS servers on other sites are ok
EXCH1-RTD has CAS and HUB transport roles. The same site has two mailbox only servers. EXCH2-RTD (mailbox server for normal mailboxes). And EXCH3-RTD (mailbox server for archive mailboxes)
No entries in the event logs that seems to be related
As the problem only occurs with Outlook clients, I suspected RPC issues. We cannot gracefully stop the “Microsoft Exchange RPC Client Access” service on EXCH1-RTD while the issue occurs. We
can only kill the process and restart the service, solving the issue instantly.
What we’ve tried until now:
Updated all Exchange servers from Exchange 2010 SP3 RU6 to RU8-v2 (server OS=W2K8R2)
Updated all Exchange servers to latest critical Windows updates
Recalculated requirements using MS Sizing tool. Upgraded EXCH1-RTD VM from 8GB and 2 vCPU (1 core/cpu) to 16GB
and 4vCPU (1 core/cpu)
Ran various perfmon counters and compared them with other Exchange servers, not finding any obvious anomalies.
Any ideas would be greatly appreciated!
Ron

Hi Ron,
From your description, OWA works well, the issue is related to Outlook side. In your case, I recommend you use Outlook safe mode to determine whether the issue is related to add-ins. If the issue persists, you can create a new profile to check the result.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

It's very slow to access file server after installed SP1 of Win7.

I found it's become very slow to access shared files on file server after installed win7 SP1, (windows6.1-KB976932-X86.exe), access same file, the win7 without sp1 is fast in 5 secs, but the pc with sp1 need more than 30 secs. And
I tried to removed the sp1, everything goes fine, access fast as others.
I don't understand what's the reason and which feature affected it, I believe the sp1 can help Win7 be more safety, but why the performance on it get worse.
And I didn't find the same question or tips on forum or website, do you really haven't the issue?
Arnold From Shanghai, China
Arnold Yu

Hi Arnold,
Windows 7 Service pack and any other Windows Updates are released to improve the performance, reliability and security of the system.
Firstly please run the performance troubleshooter:
Open the Performance troubleshooter
http://windows.microsoft.com/en-US/windows7/Open-the-Performance-troubleshooter
If it doesn't resolve the issue, Put the computer in
Clean Boot and then check to see if the issue persists.
If it still persists, please use performance monitor to trace your computer's performance:
Performance Monitoring Getting Started Guide
http://technet.microsoft.com/en-us/library/dd744567(v=ws.10).aspx
Karen Hu
TechNet Community Support

No client access on DAG switchover - Single site

Let’s summarize my environment:
I have 3 Exchange 2013 SP1 (cu4) server in one site. CAS01, only have cas role and MBX01&MBX02 have only mailbox. Both mailbox are in a DAG (DAG01).
The server mounting my database is MBX02. Whenever a switchover to MBX01 occur (or when I force it whith Move-ActiveMailboxDatabase –server MBX02 -ActivateOnServer MBX01), all my client get disconnected so no more outlook, active sync
and even owa. As soon as I roll them back on MBX02, everything returns to normal. However, every single email delivered while the DAG was mounted on MBX01 are getting delivered to the mailbox server so dag is working properly for the mail flow, minus the client
access HA.
Now I know that on Exchange 2010 and the issue could have been with the value of –rpcclientaccessserver on my database, but this value is not used anymore on 2013.
Any ideas?
Thanks

Hi S.Nithyanandham
1. No my servers are working pretty fine is I create a non dag DB on MBX01, Client access and mail flow is fine. Turning off both Windows firewall didn’t
change anything
2.
Server Check                Result Error
MBX01 ClusterService       Passed
MBX01 ReplayService        Passed
MBX01 ActiveManager        Passed
MBX01 TasksRpcListener     Passed
MBX01 TcpListener          Passed
MBX01 ServerLocatorService Passed
MBX01 DagMembersUp         Passed
MBX01 ClusterNetwork       Passed
MBX01 QuorumGroup          Passed
MBX01 FileShareQuorum      Passed
MBX01 DatabaseRedundancy   Passed
MBX01 DatabaseAvailability Passed
Server Check                Result Error
MBX02 ClusterService       Passed
MBX02 ReplayService        Passed
MBX02 ActiveManager        Passed
MBX02 TasksRpcListener     Passed
MBX02 TcpListener          Passed
MBX02 ServerLocatorService Passed
MBX02 DagMembersUp         Passed
MBX02 ClusterNetwork       Passed
MBX02 QuorumGroup          Passed
MBX02 FileShareQuorum      Passed
MBX02 DatabaseRedundancy   Passed
MBX02 DatabaseAvailability Passed
MBX02 DBCopySuspended      Passed
MBX02 DBCopyFailed         Passed
MBX02 DBInitializing       Passed
MBX02 DBDisconnected       Passed
MBX02 DBLogCopyKeepingUp   Passed
MBX02 DBLogReplayKeepingUp Passed
3. I’ve double check that and recreated the dag binding multiple time with no luck.
4. yes they are
[PS] C:\Windows\system32>get-mailboxdatabasecopystatus | ft -au
Name      Status CopyQueueLength ReplayQueueLength LastInspectedLogTime ContentIndexState
DB1\MBX01 Mounted 0               0
Healthy
DB2\MBX01 Mounted 0               0
      Healthy
DB3\MBX01 Mounted 0               0
Healthy
DB4\MBX01 Mounted 0               0
Healthy
[PS] C:\Windows\system32>get-mailboxdatabasecopystatus -server mbx02 | ft -au
Name      Status CopyQueueLength ReplayQueueLength LastInspectedLogTime ContentIndexState
DB1\MBX02 Healthy 0               0                 2015-01-12 19:57:58 Healthy
DB2\MBX02 Healthy 0               0                 2015-01-12 19:58:10 Healthy
DB3\MBX02 Healthy 0               0                 2015-01-12 19:58:07 Healthy
DB4\MBX02 Healthy 0               0                 2015-01-12 20:00:23 Healthy
5. None except those related to the failover if I bring MBX02 down
6. File share is fine and acessible.
Then please explain me what you are trying to say on the below mentioned line?
When I have a failover and database are mounted and healthy I can’t connect trougth any devices but email sent to my organization are devilered in databases correctly. I can see them with Get-MessageTrackingLog. In addition, my Wtachguard
in front of my cas is not reporting any bounce or error, everything is delivred and queue is empty inside it.
A big Thank you for your help
Alex
Alexandre Contant

Slow client access

Similar Messages

Maybe you are looking for