Slow Connection with FTP and SSH after a migration from 10.3.9 to 10.4.6
Hi all,
I just move my server from 10.3.9 to 10.4.6.
I import all my users and settings.
When i try to connect to my server using FTP or SSH, the connexion is slow.
I have to wait arround 45 sec before connecting to the server ( i never wait with the old 10.3.9 )
ex of connexion + delay
I enter : ssh myuser@myserverip
server : Password: ( 26 sec after i hit the return key !! )
server : Last login: Tue May 9 11:57:03 2006 from XX.XX.XX.XX ( 2 sec after )
server : Welcome to Darwin!
It is faster than the first time because the server must store some datas of recent connected users.
I have the same problem with FTP
Thx for help
I have this same problem.
I'm not sure how to set up or tweak DNS. Could someone point to where this is accomplished?
I'm not using a DNS server inside our firewall because I'm not sure how it works. I have DNS service turned off on the OS X Server.
Similar Messages
-
I'm on a windows laptop using iTunes sharing through the family to connect with Apple TV.
After choosing the folder of photos to be shared and displayed on the appletv and when I choose to show on screen, they are not shown in the order they are in the original folder.
How to pair show in a certain order, for example, sorted by name.
grateful
Julio CesarNot that I'm aware of. You just export JPEG copies to a folder that you can point iTunes to. For instance, I have created a folder in my Pictures folder called Apple TV. And within that folder I have other folders of pictures that I can choose from in iTunes to share with Apple TV. But there doesn't seem to be any way to share a Lightroom slideshow. If you have laid to create a video file that would probably work. Apple TV is a little clunky in my opinion. Some things are a little more difficult to do now than they were a while back. I probably haven't provided you with much help, but just keep experimenting and I think you will figure it out.
-
After updating to Mavericks, FaceTime will say it's connecting and then fail. I can't connect with my family in the US dialling from UK. Any tips on how to fix much appreciated!
From the Mail menu bar, select
Window ▹ Connection Doctor
Click the Show Detail button. A drawer opens. Try to send a message and post the text that appears. Anonymize any personal information before posting. -
Hi, I have a iphone4, and bought a pair of Harman/kardon bluetooth speakers, the iphone connects with the speakers but after about a munite or 2 the connection stops.
Can you please advise me on the subject
Regards
IzakThis previous discussion discusses the same if not similar problem.
https://discussions.apple.com/message/6750990#6750990 -
After downloading InCopy I click on the downloaded file to install, but the process stops when trying to connect with server and doesn't carry on. Can you please help?
Thanks,Agathe.texier which copy of InCopy are you downloading and installing? Do you receive any specific error messages? Finally what operating system are you using?
-
Downloading iOS 7.0.1 when i start intall i lost connection with iphone and iTunes at my windows 7,64bit. now my iTunes dont find my phone and my windows divice manager show Apple Mobile Device (recovery mood) . how can i start my iphone?
Hello saimunkhan
Start with trying to put in your iPhone into recovery mode and then plug it in to iTunes and then follow the steps to restore it. If in recovery mode and still not getting anywhere, check with the article that you came from to troubleshoot it further.
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Regards,
-Norm G. -
Problem in Connecting with Ftp
Hi all,
While Connecting to the ftp i am getting the folloeing error.
"An error occurred while connecting to the FTP server 'mn01crm02:21'. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 550 /usr/sap/SAP MDM 5.5/Server/Distributions/D11_ORCL/ADCWECC/Inbound/SAP_ECC/NewPort2/Ready: The system cannot find the path specified. '. For details, contact your FTP server vendor."...
Previously port was not opened now the port issue has been resolved. Please focus some light on this error. what can be the possible ways to overcome this error. Considering that i have gven user namr and password correctly (TO connect with ftp) in sender file adapter.
Thanks
SachinHi ,
The error is surely of the Path .
Just perform the following steps.
1. Logon to the FTP machine.
2. Go the Folder where the FTP is configured....(d:/ smflder/ FTPFolder/ Parent Dir/ Child Dir)
3. Now in communication channel if u have used the path say (Parent Dir/ Child Dir)
4. Then specify the Parent folder also in the channel for e.g. (FTPFolder/ Parent Dir/ Child Dir)
This must solve your problem
Regards,
Ashwin M
Mark the helpful answer -
JDBC Thin Connections with SSL and client certificates
Hi ,
we are going have a look at JDBC Thin Connections with SSL and client certificates.
I have two questions:
1. Is it possible to use SSL connections from JDBC Thin Driver and which release of the driver introduced it
2. Is it possible to use client certificates with JDBC Thin Driver and which release of the driver introduced it
Thanks for your help
regards
Markus ReichertI could not reproduce the error after appending the SSL certificate to the certdb.txt file available under $Jinitiator_Home/lib/security folder.
Steps to add the SSL Certificate:
1. Run the form with the https mode in the IE Browser.
2. Security Alert is raised.
3. Click on the View Certificate button.
4. In the Certificate Window, click on the Details tab.
5. Click on the Copy to File button to copy the certificate.
6. Copy the certificate and append to the certdb.txt file. -
Very slow connection with Mifi 4510L??
I'm hoping someone here can give some guidance. I am having very slow connection with the 4510L we just got. Via test on speedtest.net I'm seeing download speed of .17 MBPS at times it was so slow the test was not completing. I normally have 1 or 2 bars on the mifi unit and have seen up to 3 at times. I drove into town and see the same range (1 to 3 bars). I have yet to see the 4G light come on except for prior to activation (would light solid green at times) since activating I have only seen the violet light for 3G.
Verizon advertises full service both around our city (Richmond, VA) and at my more remote location in Hanover. I have been through the recommended resets and nothing seems to improve the connection speed. Could the unit itself be defective? Also, I've noticed when I go to a location website it thinks I am in Pennsylvania when I am in Virginia. Could the Mifi be trying to connect to a signal in that location for some reason (was refurbished device)
Thanks for any help you can offer,
BrianI was having problems but upgrading to 2.28 seems to have helped me in addition to a few other changes I made based on this review of the 4510L
http://www.anandtech.com/show/4500/novatel-wireless-mifi-4510l-review-the-best-4g-lte-wifi-hotspot/4
1) "selecting WPA2 Personal/PSK (AES)"
2) "manually selecting a channel (instead of Auto) fixes almost all the instability problems"
(I'm not sure if it actually worked as the diagnostics always shows channel 0 no matter what I picked. I did try a couple before one - or the myriad of other things I tried - seemed to make a difference - at least for now - fingers crossed)
3) "allowing for one to select between each network mode manually, so you can force 4G LTE, EVDO, 1xRTT, or all of the above. This is incredibly useful if you’re right at the cutoff for 4G LTE SINR" (that's WWAN Preferred Mode LTE only for me)
4) I also changed my 802.11 Mode to just one mode that works on both computers at my house
5) I am also careful to turn it off when I am done with it and take it off the charger for the night as well.
It is my only internet service due to my semiremote location (no cable etc) and when I first got it as a replacement for my dependable 2200 I was about to pull all my hair out. I was "forced" into it because due to antenna issues on a local tower that supplies my 3G signal my 2200 wasn't even able to load my gmail account. Verizon very helpful on that - call us if its still an issue in a "few weeks"! However, when I inquired about the antenna's effect on a 4G signal, an intelligent tech was able to tell me that it was not the tower I would be getting a 4G signal off of - odd but I didn't question that possibility.
It runs very very warm but I suspect having it on the charger and using it almost all day is part of that. At first I was wondering if heat was part of the problem - going so far as to have it sitting on an ice pack to test that theory. Of course then I had to wonder if maybe I was freezing it -lol. I am careful to turn it off when I am done with it and take it off the charger for the night as well.
I've been on it most of the day and it seems to be behaving well - so fingers crossed -
Wifi connection with 4s not working after installing new software ios6
wifi connection with 4s not working after installing ios 6.
Go to Settings > WiFi > Select your network and hit the right arrow to "Forget Network"
Then go to Settings > General > Reset Network Settings and try connecting again when the phone restarts. -
I can't set up gmail in my iPad 2. Keep on saying ' can't connect with SSL and ask me whether to connect without using SSL, then I press 'yes' and it said again IMAP is not working and tell me to see network connection and incoming mail server. No idea how to do anymore. Already tried to figure out. But not work. Can anyone pls help me?
Nope, doesn't pass verification. I get the spinner for a minute or so, then the alert about setting it up without SSL. Are you suggesting I disable Fetch and Push BEFORE I enter the account details? Because I never get past the account details screen, unless I choose "Set up without SSL" after the warning.
-
Regaining Airport connection with WEP and Siemens Gigaset
After loosing connection with MBP and Macbook and latest security- and Airport updates, reinstalling of IO80211Family.kext vers.1.5.1 helped.
It's included in Airport Extreme Update 2007 001.
Extracted it with Pacifist and copied it the Extensions folder.(as root)
Important!!
Repairing permissions and reboot.
Took me two days to find out.
Maybe it helps for other third party routers too.
Intel MacMini works with all latest updated. (so far)Can anyone talk me though what to do since I know very little about wireless networking. I am quite prepared to buy a new wireless adaptor for the PC, but don't want to buy something that isn't going to work.
Unfortunately, you didn't provide much information about your PC or the current external wireless adapter to be of much help. WPA was first supported with WinXP w/SP1; which OS is your PC running? Likewise, early versions of wireless adapters only supported WEP. What is the make/model of yours? Does your PC support PC cards, PCI cards (internal), and/or USB devices? -
I had problems with my iphone 5. After hanging many times, I connected with itunes and restored the settings. But it didn't work. And my phone is now starting with "Hello" to newly activate. Again, it could not proceed but saying "cannot activate now".. please help me how to do. Thank you very much.
you will need to do a hard wipe or remember the password hard wipe can be found on youtube how to. but this will erase all data
-
HT201263 Connection with Itunes and my Iphone 4s IOS7 is not possible.
Connection with Itunes and my Iphone 4s IOS7 is not possible. You can see in my iphone in windows explore. But still not the new Itunes for IOS7
Here's an odd fix that worked for me.(After trying restarting AMDS and uninstalling/reinstalling iTunes* to no avail.)
I swapped my current USB cable from it's usual port to one of the front ones. That prompted iTunes to, instead of stare blankly back at me, to force up the error message indicating it recognized an iPhone in Recovery Mode.
This switches iTunes to the Restore from backup screen and gets you back on your way.
* For anyone having trouble with files being in use when they try to manually delete the 'Common Files\Apple' folder, it works if you go into Safe Mode. -
Problem with Rescue and Recovery after installing Norton Internet Security 2010
Hi all.
It's my first time in this forum.
I have a problem, with Rescue and Recovery, after installing Norton Internet Security 2010 on my T43.
The message I get it:
"Rescue and Recovery is unable to back up the file 'C:\Documents and settings\all Users\Application Data\ Norton\ 00000082\00000109\000003c1\cltMLS1.bat' Because the file is either corrupted or being used by another application. Please close any application that could be using the file.
I tried to close the Norton but I couldn't find how.
Tanks
Doron71Hi and welcome to the forum,
the reason for this situation is, that the antivir files are protected from being modified.
This is the reason, why this file cannot be backed up. I assume, that you would get much more such messages, as there are surelly multiple files files, that are protected like this.
So the solution is to block folders from being archived. Please start RnR application and in the configuration set this folder as the excluded one.
This will skip the backup of this file and will fix your situation.
Please let me know, if you have covered this.
Cheers
Maybe you are looking for
-
Safari Crashing Issue - Need Help Diagnosing/Solving
When i use safari, it randomly crashes, i am not sure of the patterns and i previously thought it was the flash player. i reinstalled that and it kept happening. so i was wondering what i could do it fix it, like maybe reinstall safari alltogether (i
-
Hi, Can anybody tel me where the withholding tax related details are stored.(which tables)
-
My new MacBook Air keeps shutting down the screen while I use it
My new MacBook Air keeps shutting down the screen while I use it and has to be rebooted. I took it in to the Genius desk at my local store, but they couldn't find anything wrong and said that they have never seen this problem before. I Spoke to the I
-
I'm developing an application using WebRTC and Data channels. I have no problem connecting data channels in chrome browsers across separate networks but, unable to connect data channels in Firefox browsers across separate networks. I always get iceCo
-
HT201320 Google keeps telling me my password in incorrect
I am adding a gmail account and they keep telling me my passsword s incorrect. I cahned the password and it is still telling me that.