Slow connection with WRT160Nv2 model router

someone help please...I am having slow to intermittent connection when router is hooked up...when hooked directly to modem speed and connection is fine..no problems when changing websites or pages...but with router hooked up, I sometimes get a very slow connection or the computer doesn't detect internet connection & goes into the diagnose connection program...which somtimes doesn't detect any connection issue when run and the computer connects to internet then or tell me to power cycle modem and router then try to connect which works...and the connection will be good for a bit then does this all over again...very frustrating...is their a setting in the router or what do I need to do to fix this issue? 

Check this link to upgade or reflash the router's firmware.

Similar Messages

  • Slow connection with westell 9100Em router...

    i decided to make my own thread and mayb a tech support will see it and solve my problems or anybody that know why this happens and can help me with this.
    1. my first problem is my speed, i never get what i paid for which is 20/5 and i know u wont always get your max speed but atleast close to it. the only time i get close to that speed is when i reset or reboot my router which is a hassel to do everytime i get on internet or when i call tech support to reset my ONT which is also a hassel to do everytime i get on the internet.
    they tried to resolve it by saying its the router but i just got a replacement router yesterday, which is also a westell 9100EM router and still the same problem. if its not consistent with the speed, i will call tech support again but so far its not, its down to 5/1 and even 2/0.8.
    2.my ping is really high, 500ms average and the max today was around 900ms and that i know its really bad when i know its suppose to be less than 100ms or even less than 50ms. so with this high ping, i cant play online on my 360 b/c the connection to each player is really bad with that high ping. my bullets for call of duty 4 modern combat is really laggy, so bad it lags for about a second or two which makes u a dead duck when you are out in the open.
    if anyone can help me with this problem, i will appreciate your efforts.

    If you send me a private message with your account info, I will look into your service and get this resolved for you. 
    Brian K
    Verizon Telecom
    Fiber Solution Center
    Notice: Content posted by Verizon employees is meant to be informational and does not supercede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan.

  • Very slow connection with Mifi 4510L??

    I'm hoping someone here can give some guidance. I am having very slow connection with the 4510L we just got. Via test on speedtest.net I'm seeing download speed of .17 MBPS at times it was so slow the test was not completing. I normally have 1 or 2 bars on the mifi unit and have seen up to 3 at times. I drove into town and see the same range (1 to 3 bars). I have yet to see the 4G light come on except for prior to activation (would light solid green at times) since activating I have only seen the violet light for 3G.
    Verizon advertises full service both around our city (Richmond, VA) and at my more remote location in Hanover. I have been through the recommended resets and nothing seems to improve the connection speed. Could the unit itself be defective? Also, I've noticed when I go to a location website it thinks I am in Pennsylvania when I am in Virginia. Could the Mifi be trying to connect to a signal in that location for some reason (was refurbished device)
    Thanks for any help you can offer,
    Brian

    I was having problems but upgrading to 2.28 seems to have helped me in addition to a few other changes I made based on this review of the 4510L
    http://www.anandtech.com/show/4500/novatel-wireless-mifi-4510l-review-the-best-4g-lte-wifi-hotspot/4
    1) "selecting WPA2 Personal/PSK (AES)"
    2) "manually selecting a channel (instead of Auto) fixes almost all the instability problems"
    (I'm not sure if it actually worked as the diagnostics always shows channel 0 no matter what I picked.  I did try a couple before one - or the myriad of other things I tried - seemed to make a difference - at least for now - fingers crossed)
    3) "allowing for one to select between each network mode manually, so you can force 4G LTE, EVDO, 1xRTT, or all of the above. This is incredibly useful if you’re right at the cutoff for 4G LTE SINR"  (that's WWAN Preferred Mode LTE only for me)
    4) I also changed my 802.11 Mode to just one mode that works on both computers at my house
    5) I am also careful to turn it off when I am done with it and take it off the charger for the night as well.
    It is my only internet service due to my semiremote location (no cable etc) and when I first got it as a replacement for my dependable 2200 I was about to pull all my hair out.  I was "forced" into it because due to antenna issues on a local tower that supplies my 3G signal my 2200 wasn't even able to load my gmail account.  Verizon very helpful on that - call us if its still an issue in a "few weeks"!  However, when I inquired about the antenna's effect on a 4G signal, an intelligent tech was able to tell me that it was not the tower I would be getting a 4G signal off of - odd but I didn't question that possibility.
    It runs very very warm but I suspect having it on the charger and using it almost all day is part of that.  At first I was wondering if heat was part of the problem - going so far as to have it sitting on an ice pack to test that theory.  Of course then I had to wonder if maybe I was freezing it -lol.  I am careful to turn it off when I am done with it and take it off the charger for the night as well.
    I've been on it most of the day and it seems to be behaving well - so fingers crossed

  • I am experiencing network failures with my Airport Extremes: the main router is a 2nd Gen, the extension a 5th Gen. The 5th Gen keeps on losing connection with the main router. Any ideas why?

    I am experiencing network failures with my Airport Extremes: the main router is a 2nd Gen, the extension a 5th Gen.
    The 5th Gen keeps on losing connection with the main router and thus with the internet.
    Any ideas why?

    Is the second Extreme configured to "extend" the network created by the first? If so its position must be such that it has a strong wireless connection to the first Extreme. If it is at the limits of the first one's wireless range its connection will be tenuous. Place them closer together and determine if that makes a difference.

  • Very slow connection with WRT54GS.

    It appeared out of nowhere 2 days ago... slow connection for websites, very high latency for online games to a point where it's unplayable... i tried to reset my router, change channel(i'm usually at channel 6), moving the antennas... nothing. when i reset, the speed is fine for a few minutes, but after a while it's back to slow connection. My router isn't even 1 year old yet and it's already broken? I can't believe that, there must be some solution. Anyone can help please?

    The latest firmware is 1.02.0 if you have wrt54gs v6 & V5 if yout got v7 the latest firmware is 7.50.0
    First step you need to check is your direct connection from the modem.
    1. hardwire your computer straight to the modem using a cat 5 ethernet cable, if your download speed and your internet connection is slow, the problem is with the modem or with your ISP so you need to call your ISP and double check your connection.
    If your speed if fine straight to the modem then its with the router.
    2.Hardwire your computer straight to the router if your speed is fine when its hardwired through the router, then the problem is with your wireless card or the wireless settings of the router.
    In US the standard channel is 11,6 and 1. So play around with the channel. If its still doesnt work then access the setup page of your router click on the WIRELESS tab click on ADVANCE WIRELESS SETTINGS sub tab. set beacon interval to 50, RTS and Fragmentation Threshold to 2304.
    After that turn off the modem the router and your computer for 1min. After a minute turn on the modem first after lights of your modem are steady, turn on the router and lastly turn on your computer, check your connection if its fine then its fixed if not call linksys tech support.
    I hope this would help. Good Luck!

  • Painfully slow connection with new master socket

    Hi forum
    Hoping for some advice or perspective on possible issue with my broadband connection. Perhaps unrelated, but I recently had a new master socket fitted (NTE5), however the broadband speed in the house is now painfully slow. 
    Am using BT Home Hub 4, below are the rest results I'm receiving, however I'm curious as to whether 0.25Mbps really is likely to be the maximum achievable speed, as this renders several services almost unusable.
    Grateful if anyone feels there is more that could be done.
    Thanks,
    Kevin
    Results....
    The only socket connected is for the router/ phone, which is now connected to the test socket (with a microfilter).
    Quiet line test: normal
    Speed info from the hub manager (normal socket/ test socket)
    Download speed (Mbps): 0.17 / 0.24
    Upload (Mbps):                0.03 / 0.02
    Ping latency (ms): 326.50 / 0.00
    ADSL connection (from home hub)
    12:02:59, 29 Jun.
    (334146.810000) DSL noise margin: 16.50 dB upstream, 10.60 dB downstream
    12:02:58, 29 Jun.
    (334145.900000) DSL line rate: 440 Kbps upstream, 284 Kbps downstream
    Speed test (from BTW performance test)
    1. Best Effort Test:  -provides background information.
    Download  Speed
    0.17 Mbps
    0 Mbps
    0.25 Mbps
    Max Achievable Speed
     Download speedachieved during the test was - 0.17 Mbps
     For your connection, the acceptable range of speeds is 0.1 Mbps-0.25 Mbps.
     IP Profile for your line is - 0.25 Mbps
    2. Upstream Test:  -provides background information.
    Upload Speed
    0.03 Mbps
    0 Mbps
    0.83 Mbps
    Max Achievable Speed
    Upload speed achieved during the test was - 0.03Mbps
     Additional Information:
     Upstream Rate IP profile on your line is - 0.83 Mbps
    We were unable to identify any performance problem with your service at this time.
    It is possible that any problem you are currently, or had previously experienced may have been caused by traffic congestion on the Internet or by the server you were accessing responding slowly.
    If you continue to encounter a problem with a specific server, please contact the administrator of that server in the first instance.
    Please visit the FAQ if you are unable to understand the test results.
    From kitz.co.uk max speed calculator
    Estimation of your maximum rate adaptive adsl speed
    Downstream
    Attenuation
     0 dB
    Approx
    Line Length
    0 km
    From BT Diagnostics site:
    Broadband Speed Test
    We haven't been able to complete the speed test at this time. 
    This may be due to a problem with the speed tester, or your line may be running very slowly. 

    Thanks for your quick response, much appreciated. Further results below - suggesting that faster should be possible?
    The connection time from 12 was due to a manual reset, the only time it was reset (WAN logs also noted below).
    ADSL Checker....
    Telephone Number 01562xxxxxx on Exchange WOLVERLEY is served by Cabinet 3
    Featured ProductsDownstream Line Rate(Mbps)Upstream Line Rate(Mbps)Downstream Range(Mbps)Availability Date
    WBC ADSL 2+
    Up to 13.5
    11.5 to 15
    Available
    WBC ADSL 2+ Annex M
    Up to 13.5
    Up to 1.5
    11.5 to 15
    Available
    ADSL Max
    Up to 8
    7 to 8
    Available
    WBC Fixed Rate
    2
    Available
    Fixed Rate
    2
    Available
    Other Offerings
    Copper Multicast
    Available
    12:02:59, 29 Jun.
    (334146.810000) DSL noise margin: 16.50 dB upstream, 10.60 dB downstream
    12:02:58, 29 Jun.
    (334145.900000) DSL line rate: 440 Kbps upstream, 284 Kbps downstream
    12:01:36, 29 Jun.
    (334063.890000) DSL is down after 2226 minutes uptime
    12:01:36, 29 Jun.
    (334063.890000) ETHoA is down after 2226 minutes uptime
    12:01:36, 29 Jun.
    (334063.550000) PPPoA is down after 2226 minutes uptime [Waiting for Underlying Connection (WAN DSL -​ Up)]
    12:01:33, 29 Jun.
    (334060.470000) PPP LCP Send Termination Request [User request]

  • Slow connection with wireless, normal when wired

    I've looked at the previous posts regarding this problem but I don't know how to do any of the recommended procedures. I can connect to the internet wirelessly with no problem but my wireless connection has become very slow all of a sudden (speakeasy speed test is 150-300 kbps). If I connect with a cable instead (wired connection) I get my great Comcast digital cable download speed on Speakeasy which is 15-16 Mbps! Previous posts mention looking at what the "RWIN" is set at and changing it but I'm not comfortable messing around with such basic Windows XP settings when I don't know how to reset back to the default if it doesn't work. Is there any patch from Linksys for fixing this or another easy way to fix it? Thanks! Kenshu

    First thing is download firmware from www.linksys.com/download, and update it to latest version. Now follow this from a wired computer : Open setup page of router by typing http://192.168.1.1 in browser's address bar, and typing password as "admin" and no user name. Here enable MTU and set size to 1350. Go to security tab, and disable block anonymous internet requests. Change channel to 11. Go to advanced wireless settings and here change beacon interval to 50, fragmentation threshold to 2306, and RTS threshold to 2307, DTIM to 2. Now reboot modem and router.

  • Slow connection with build in WiFi card

    I have a wanadoo family adsl internet 20 mbit connection with a live box. The live box is also a wireless router.
    When i connect to the livebox wiht my toshiba mx40-231 the connection is very slow. The connection is constantly switching between 1mbps and 54 mbps and speeds between.This is also the problem. One moment a internet page is send in 1/10 of a seccond and 1 minute later a page is loading in 20 secconds! the strang thing is that the signal strength is constant high!
    With the live box i got also a USB wireless stick. when i use this stick i get a constant 54 mbps very very fast connection.
    It seems to me the build in wireless card is the problem. I have already the latest wireless driver and tried a few channels on the router.
    Anyone got a idea to solve this problem so i can throw this wireless stick away :-) Very clumpsy thing this wireless stich on such a beautifull laptop!

    Hi
    If you check wireless board you will find many topics about this theme. It is known that Intel wireless card 2200 B/G make troubles and connection is not constant. We can just speculate why this happen but the fact is that this card has problems with different routers.
    For example: Satellite M40 has the same card and work fantastic with Netgear router. Even with Belkin it works well with full speed.
    I recommend you to install latest Intel driver
    Good luck

  • How to stream audio/vide​o files on bb playbook and create different play lists from another pc and/or external hard disk drive connected with a share router

    hi guys
    i wish to use my external hard disk drive (1tb) connected with a belkin share router as main storage drive and stream audio/ video and other files on bb playbook through wifi.
    also wish to create different playlists directly on playbook.
    please tell me guys how can I do it.
    thank you in advance

    Try this...
    http://forums.crackberry.com/blackberry-playbook-f​222/how-stream-video-music-more-your-mac-pc-your-p​...

  • Macbook pro Unable to connect with my belkin router 5ghz

    I have recenly purchased belkin N750 dual core router (1. 2.4 Ghz and 2. 5 Ghz).  My macbook detects both wireless network, however, it is not connecting with 5Ghz.
    I have updated the firmware of my router. Now it is most updated.
    I have also performed network diagnostics still I am not able to connect 5Ghz.  However, I am able properly connect with 2.4 Ghz network.
    Pls guide me.

    Hello Oliver,
    I would start with removing your Wi-Fi network from your Preferred Network list. To do that, navigate to the Symptom: After restarting or waking from sleep, my computer might not connect to the Internet section in the first article and it will walk you through that. Another thing you can try is creating a new Network Location to see if there is an issue with your current configuration and the steps for that are in the second article.  
    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    http://support.apple.com/en-us/HT202222
    Using network locations (Mac OS X v10.6 and later)
    http://support.apple.com/en-us/HT202480
    Regards,
    -Norm G.  

  • Very slow connection with db2 ver 9.1 client on win2000

    I have been having difficulty in diagnosing why when after installing db2 9.1 fp5  client on our wind2000 box which has Crystal Embedded 10 RAS ( service pack 6 ) running, the reports  that i am invoking using the Java SDK ( we have an  online J2ee web application ) are very slow. I have narrowed the problem area down to where the java sdk is trying to set the table location.
    Using the db2 7.1 client since 2005, we have not had this issue. We must upgrade to ver 9.1 db2 since this is being done at  an enterprise level. I upgraded our test server to 9.1 and noticed this slowness. With the 7.1 db2 client and the same RAS server, the reports take about 2 or 3 seconds but with the 9.1 client the reports take about 40+ seconds each and this is always as the setTableLocation method. Once is goes through this, the rest runs fine.
    I have tested this with a local db2 datbase on windows, a remote db2 database 3000 miles away ( same as with what the 71 client runs against) and it is consistently the same response time.
    I did notice that if I ran my java online on the same server as the RAS server, the response time is great. This only seems to be happenning when the java app is not on the same server as the RAS server.
    I also have a java stub that does not run in a web container. in this case, with the same code and the same databases, whether i am local or remote from the crystal server, the response time is 40+ seconds to connect.
    The .rpt files are developed via Crystal Reports 10 and we develop on a local database and we modify the database credentials throught the SDK as we deploy upto production. I have also tried this with the same database we developed with and the same 40+ seconds connect time.
    All of these scenarios work fine with the 7.1 client.
    so it seems there is some connection issue with the 9.1 client only.
    Need help urgently.

    I have exactly the same issue.

  • Re: Data Modeler: Slow responsiveness with large Models

    I am using V3.3, and I still experience the similar performance problem with large models.  Even for small models,  if I leave the modeler to run for a long time, it becomes slower and slower over time.  Last night, left the it to run a synch with the dictionary, and this morning, the program pretty much stopped responding and running ( indicated by 0% CPU).  I am not sure if the synch was done. After I tried a few times of resizing and waited for long time,  it displayed the menu. So I clicked on Save, then again it hung and never complete the save. Took forever to complete the repaint of screen.  Seems have some memory leaking problem.  Is Oracle aware this kind of issue?  What is the largest model that Oracle tested on the release of SQL Data Modeler? 

    Hi,
    you can try this Re: Memory Problem with Big Model
    Philip

  • Yestderday I connected with wifi from router in my ipad2 but today I cannot, have any help please?

    According to previous problem and solution, I reset and power ON/OFF of my router and also ipad2. But No change stil!. My router is quite OK, because I was always connected with laptop. Anyway, I need assistance and kind help.

    So you've power cycled the iPad 2 & the router. The laptop is working again fine with the router.
    Can the iPad 2 see you network, aswell as other networks?
    Try selecting you network if its on the list in Settings > WiFi then Forget this Network. Then iPad 2 settings > general > reset > reset network settings.
    Test to see if the wifi network can be detected & joined again in the Ipad 2.

  • Loosing and slow connection with Airport Extreme

    Hi. Before I start, I hope there are some who suffer the same problem as me.
    First of all, I have a problem with my MacBook and Airport Extreme. The Network I created with Airport is getting really slow or unconnected with my MacBook. So I tried to reset both the modem and Airport. Actually, it kinda works, however this problem occurs later.
    First time I thought it was the problem with uTorrent that I didn't use uTorrent anymore but it still has a problem.
    Because of this **** problem, I have to reset my modem and Airport Extreme several times a day and it really stressed me out. Embarrasingly, I don't even know what the problem is. is ti the problem with My macBook? AirPort Extreme? Modem? No idea..
    I need a help...
    P.S. Modem seems working fine since the ethernet is working fine. maybe problem of Airport or MacBook. I think I should go to the Genius Bar but I am afraid that 'Genius' is going to just check once and say 'It has no problem.'

    zdawg77 wrote:
    I too am having very slow connection speed issues with two of my white macbooks, both running 10.6.2, same airport extreme wireless adapter (built in). The strange thing is, these two macbooks came in a macbook 5-pack, and the 3 other laptops all have excellent speed. Nothing different has been done with these 2 laptops - all were updated (albeit the 2 were much slower to download the update), with nothing new installed otherwise...
    There were some Macbooks that had an issue with the screws holding their internal AirPort cards in place loosening, resulting in noise and lower signal levels from the antennas.
    You may want to try taking one of the affected Macbooks to a local Apple Store and see if you experience the same issues on their in-store network.

  • Itunes slow connection with internet

    HELP please someone!
    I recently purchased an iphone 4 and so had to get itunes!
    I never had the need for it before but I'm quite impressed with it, sorts my music well and works quicker than I thought it would on Windows.
    There is 1 issue though, the connection with the internet seem terrible!
    I can't stream the 30sec clips of songs in the itunes store! If I download a song it takes at least half an hour! =(
    My connection works fine for everything else, normally around 3Mb/sec download speed, often more though! So don't have any issues with anything else!
    If I download a song from another source, often takes a matter of a few mins, if not seconds. But itunes seems so slow on the internet!
    Really quick to use, just slow as **** on the net!
    Any solutions you can suggest?
    I've got a Comodo firewall and Mcafee anti-virus and I've added itunes to their safe lists! I can't see what's slowing it up!
    HELP PLEASE!
    Thanks in advance folks!

    How about the built-in Windows firewall - is that also active?
    As a test if this was my PC, I'd turn off all firewalls and security to see if it made any difference. You can always turn it back on after the test.
    Also I'd try closing itunes in the main account, logging into the windows guest account and see if it is slow there, too.

Maybe you are looking for