Slow creating AP Invoice when "Copy from" GRPO is used

Hi,
I was creating an AP Invoice by "copying from" an existing GRPO and the process was slow. I took 10 minutes to successfully add the AP Invoice after clicking the "add" button. Creating an invoice directly - not copying from a PO or a GRPO - gave no problems
i tried asking all the other users to log off from sap first but it was just the same - slow creating AP Invoice.
What could we do to solve this? Thank you.
eric

Thanks Gordon, I see only three UDFs in those document types and just one FMS.
I already did shrink the Log and set the recovery model to "simple" though i do not think that it would help much as the Log is not growing wild in size.
Regards,
derrick

Similar Messages

P55GD80 slowdown when copying from DVD SATA drive.

I had an issue with my system becoming unresponsive after copying files from a DVD drive to my secondary data drive. I have the specs below:
P55GD80 (Bios 1.5)
Core i7-860
Intel X-25M 80GB SSD (Boot Drive)
Seagate 7200.10 320GB (Data Drive)
DVD-ROM
DVD-RW
4 GB Gskill memory
Windows 7 Ultimate 64bit.
My initial setup had all of the drives on the Intel SATA 1-6 connections. I first noticed an issue when copying files from either of the DVD drives to my secondary data drive. My whole system would slow to a crawl. After many different combinations, I found the best performance by moving my secondary data drive to the SATA 7/8 Jmicron controller. It does not make sense why I needed to do this. Any ideas? I did not notice an issue when copying from the SSD to the data drive, but then again, I rarely do that.
Do I need to enable AHCI for the Intel controller? If so, how do I do that. When I went into the BIOS there only seemed to be an option for this for the Jmicron controller. When I enabled this, the system suddenly did not see any other drive besides the one connected to the Sata 7/8.
Also, why when I hook up the two DVD drives to SATA 7/8 (JMicron) will the BIOS see both drives, but Windows 7 sees only 1? Does JMicron only operate in RAID?

Thanks guys, I figured it out. I had two problems really. When I went to turn on AHCI the first time, I already had my secondary data drive connected to the SATA 7/8 port, which messed everything up and made me think I wasn't turning AHCI on for the right controller. Turns out I was, but I had to move all of my drives back to the Intel SATA 1 through 6 ports. Once I did that, everything was detected properly, but then my second problem was needing that registry key change which I had no idea was necessary. I would like to think I am pretty technical, but I am obviously a noob to system building since I had never heard of AHCI.

Can't change quantity when copy from Sale order for Delivery

Hi all!
Can i use authorization for can't change quantity when copy from Sale order for Delivery.

Tien,
Approval will not work when you have mutiple rows of data. You would have to work with SP Transaction Notification
There has been threads before on the forum on the same topics.
Block the Quantity in Sales Delivery
Approval Procedure for chaning quantity in Delivery Document
Suda

Error message when copying from Acrobat Reader

Error message when copying from Acrobat Reader - any file, any time (Win 7, Adobe many versions until recent).
Copy works, but causes a needless and useless error message that has to be clicked away every time.
This problem is published on the web for a million times without a working solution. And even in the Adobe forum no qualified answer (http://forums.adobe.com/thread/441370)
When can I expect a solution?

"101 Views 0 Replies
Was this helpful?"
Of course not.
But thank you anyway, I talked to my admin and we changed the whole company to Foxit.
It can be that easy.

Why do colors slightly change when copying from Illustrator to Photoshop?

I want to copy a object from Illustrator and paste it into a Photoshop document with the same color mode and profile.
When I use the Eyedropper Tool on the pasted object in Photoshop the color seems to be slightly off.
Both the Illustrator and the Photoshop document have their Color Mode set to RGB
Both Applications are using synchronized color settings.
This also happens when the object is dragged or Placed. It does not happen when copying from Photoshop to Illustrator.
Could there be a problem with my color management settings? What actually happens to the color information, when it is copied from one application to another?
Thanks for any help.

Why the heck are people still using these nonsensical hexadecimal HTML numbers?
Since some decades we got used to describe RGB values by decimal numbers 0...255.
Both your value sets are practically the same, but how they were converted from one
to the other, that requires an investigation, how Adobe workflows are distributed
between California and Bangalore.
Best regards --Gernot Hoffmann

Does OS X corrupt files when copying from SD card to desktop?

Using finder to copy a folder and its files from SD card to mac desktop seems to cause *some* files to be corrupted, specifically a handful of MP4 files from a FAT32 SD card which was used in a digital camera. Using a binary/hex comparison tool reveals that some segments of the files contents were modified when copied from the SD card.
This error occurs when copying multiple files using Finder windows. However, when copying the same files one at a time, the corruption does not occur. This appears to be an OS level bug. In reviewing past content, I found that dozens of MP4 files have been corrupted in the past 4 months by merely copying the files from the SD card to mac desktop using Finder copy/paste.
I am using OS X Mountain Lion 10.8.3

Well, like I said, the byte size in fact did *not* change. So I'm not even concerned about that. What *did* change is the content of those bytes and it doesn't matter what operating system you are using, the content of those bytes is *not* supposed to change.
Also, like I said before, if I copy the individual file (MP4) insead of the entire folder, and then do the binary/hex comparison, the byte data is identical. i.e.
a) copying one file at a time produces an *identical* file on the HD, i.e. the byte count AND the byte content are precisely the same.
b) copying a folder with multiple files produces a *different* file on the HD, i.e. the byte count is the same BUT the byte content differs from the original file.

Getting The operation can't be completed because you don't have permission to access "iPhoto Library". when copy from old leopard timemachine backup

Getting The operation can’t be completed because you don’t have permission to access “iPhoto Library”. when copy from old leopard timemachine backup.
any help?

Welcome to the Apple Support Communities
See > http://pondini.org/TM/E9.html

SRM validate the Catalog Item when copying from old templates

Do SRM validate the Catalog Item when copying from old templates and previous shopping carts? Is this standard functionality?
Thanks,
Rajan

Continuation to my previous post:
My findings based on the analysis I did. Might help people who are looking for similar info.
As Jason mentioned, the Subroutine name is CATALOG_CONTENT_VALIDATE_GET
This is under package BBP_SC --> Function Group: BBP_SC_APP
After making a webservice call to get catalog details, the mapping is done as below.
IF sy-subrc EQ 0.
    READ TABLE lt_enriched_item INDEX 1.
    IF sy-subrc EQ 0.
      ls_item_validate-price      = lt_enriched_item-price.
      ls_item_validate-currency   = lt_enriched_item-currency.
      ls_item_validate-price_unit = lt_enriched_item-price_unit.
      ls_item_validate-deliv_date = lt_enriched_item-deliv_date.
      ls_item_validate-leadtime   = lt_enriched_item-leadtime.
      ls_item_validate-unit       = lt_enriched_item-unit.
    ELSE.
      lv_validate_item_exception = gc_yes.
    ENDIF.
ELSE.
    lv_validate_item_exception = gc_yes.
ENDIF.
If you go one level deeper into subroutine PERFORM sc_itm_copy_to_basket, you can see that following validations are performed.
If EITHER price, currency or price unit changes, we get the message u201C&: Price changed due to catalog validationu201D
If UOM changes, we get the message u201C&: Unit of measure changed in catalog; item not transferredu201D
When Delivery date or lead time changes, no message is raised but the new values are copied.
In a nut shell, the fields that are considered for validation are Price, Currency, Price Unit, UOM, Delivery date, Lead Time.
Thanks,
Seyed

Changing frame rate when exporting from iMovie '09 using quicktime has no impact on duration. Why?

Changing frame rate when exporting from iMovie '09 using quicktime has no impact on duration. Why?
I have a file created by digitizing an 8mm film at a rate of 24 fps. I would like to create a downloaded movie at a frame rate of 15 fps. The Export using Quicktime option seems to provide that capability but the resulting file has the same duration as the original 24 fps file. How can I get the exported movie to be slowed down?

joegez,
There is a feature you can use to slow down the video. In the project, move the mouse pointer over the clip, then click the gear icon. That brings up the Inspector. Click the Clip tab. Then you will see a feature there called Speed. Move the slider to the left to slow down the clip. Or you can enter a percentage in the box on the right.
Hope this solves the problem for you.

How can one create a paint color generated from a photo using Kuler?

How can one create a paint color generated from a photo using Kuler?

The best way to remove a pattern is to use a Fast Fourier Transform. There's a free plugin (as well as examples and instructions) here:
http://dl.dropboxusercontent.com/u/6795661/4N6site/improc/fftplugin/examples.htm
Using the plugin requires editing the individual colour channels, which PSE does not natively allow. You'll need the reasonably-priced Elements+ addin:
http://elementsplus.net/
Here's a crop at 100% of the result I got:
The pattern is much reduced. With some experimenting, you can probably do a little better.
Ken

Quicklook does not work with WMV files and quick look no longer maintains resized views when viewing from a folder using the up/down arrows

Quicklook does not work with WMV files and quick look no longer maintains resized views when viewing from a folder using the up/down arrows. Any fixes?

Same problem here...

Request: "Draw Document Wizard" when copying from Sales Order to A/R Invoic

Hi Colleagues
Our clients complain about not being able to choose the exchange rate from the base document when copying the Sales Order to A/R Invoice.
The "Draw Documents Wizard", where you can choose this option, starts only when you're in the "A/R Invoice" form and copying data from the Sales Order. But "Draw Document Wizard" doesn't start when you're in the Sales Order and copying all its data to an A/R Invoice, and they use only this sequence.
Is it possible to add the "Draw Documents Wizard" for the "Sales Order -> A/R Invoice" chain in one of the next versions of SAP BusinessOne 2007?
Thanks!

Hi,
is this happening for perticuler user or for all users.?
check any addon is running ,If yes stop addon and check again this activity.
Check general authorization too for perticuler user..
Hope it will help you.
Regards
Deepak Tyagi

Download doc problem when copied from APEX_APPLICATION_FILES to local table

Good morning!
As the subject indicatesm, I am experiencing problems downloading a document I have copied from APEX_APPLICATION_FILES to my local table FILE_SUBJECTS
and would be very grateful if someone could help.
Here is the problem:
I can successfully upload a document into APEX_APPLICATION_FILES and dowload it from there too.
I can copy the record from APEX_APPLICATION_FILES into my local table FILE_SUBJECTS and delete that entry from APEX_APPLICATION_FILES but I cannot download it from my local table, it keeps pointing me to a page which cannot be found, so I'm guessing there is something wrong with either, my INSERT INTO statement or, my link in the report.
My INSERT INTO statement is:
INSERT INTO file_subjects (id,filename,updated_by,updated_on,blob_content,mime_type)
SELECT id, filename, name, updated_by, updated_on,blob_content,mime_type
FROM APEX_APPLICATION_FILES
WHERE APEX_APPLICATION_FILES.filename = :P2_FILE_NAME;
REPORT LINK
I have tried just a normal column link in my report like: #ID# (this works when looking at APEX_APPLICATION_FILES)
but I have also tried the following:
#OWNER#.DOWNLOAD_MY_FILE?p_file=#ID#
where download_my_file is a procedure:
create or replace PROCEDURE "DOWNLOAD_MY_FILE" (p_file in number) AS
v_mime VARCHAR2(48);
v_length NUMBER;
v_file_name VARCHAR2(2000);
Lob_loc BLOB;
BEGIN
--apex_application.g_flow_id := 166;
--if not(APEX_CUSTOM_AUTH.IS_SESSION_VALID) then
-- owa_util.status_line(404, 'Page Not Found', true);
-- return;
--end if;
SELECT MIME_TYPE, BLOB_CONTENT, name,DBMS_LOB.GETLENGTH(blob_content)
INTO v_mime,lob_loc,v_file_name,v_length
FROM FILE_SUBJECTS
WHERE id = p_file;
-- set up HTTP header
-- use an NVL around the mime type and
-- if it is a null set it to application/octect
-- application/octect may launch a download window from windows
owa_util.mime_header( nvl(v_mime,'application/octet'), FALSE );
-- set the size so the browser knows how much to download
htp.p('Content-length: ' || v_length);
-- the filename will be used by the browser if the users does a save as
htp.p('Content-Disposition: attachment; filename="'||replace(replace(substr(v_file_name,instr(v_file_name,'/')+1),chr(10),null),chr(13),null)|| '"');
-- close the headers
owa_util.http_header_close;
-- download the BLOB
wpg_docload.download_file( Lob_loc );
end DOWNLOAD_MY_FILE;
Many thanks in advance!
Sue

Sue,
If you are running XE or running with the EPG versus the http server, you need to grant access to the procedure you are using for it to be run properly..
You may need to look at this function, if you are using XE or have the EPG setup for your database.. http://download.oracle.com/docs/cd/E10513_01/doc/appdev.310/e12856/adm_wrkspc.htm#BABEFDHI [Look for the section called *Restricting Access to Oracle Application Express by Database Access Descriptor (DAD)*]
Thank you,
Tony Miller
Webster, TX

A BUG in FCP 7: Multiclip Markers slip when copied from project to project

Alas, not all things are great with multiclip markers in FCP 7.
We are shooting multicam on a show with dual system sound. Individual camera angles are synced to the production sound (broadcast .wav) and merged to create new master clips that use the stereo production audio instead of the original camera audio, then the new synced/merged clips are made into multiclips using In points set on the slate claps as the multiclip synchronization method. Markers added to the A angle and B angle do indeed stay attached when added in the viewer (thanks for that bug fix, Apple). The assistants are marking the beginning of each take and all resets on each angle, so that both Angle 1 (A camera) and Angle 2 (B camera) have the exact same markers on the exact same frames.
Problem is, when the editor opens the dailies project and copies the bins with the marked multiclips into his editor project, or his or her version of the dailies project is updated, the markers on Angle 2 (B camera) all shift in time (like they were all slipped). All Angle 2 markers in each individual clip slip the same amount, but every multiclip's markers slip a different amount. Copying clips from one bin to another IN THE SAME PROJECT yields the same slippage, and what's more, even messes up the markers in the original master multiclips (as if the copies were not affiliates but literally the same master clip as the multiclips). To make matters even worse, sometimes it's the A camera (Angle 1) that has markers slipping.
This bug does not affect multiclips that are made from the clips using original camera audio. Since the production has, thus far, been unable to properly jam sync the audio and camera timecode, each merged audio multiclip can have, potentially, three different timecode numbers associated with each track, Angle 1, Angle 2 and the stereo audio. Clearly FCP has no idea what to do when it attempts to recreate the clips in another bin or project, but the offset (i.e. how much the markers slip) is not directly correlated to any timecode offset between the different tracks of the multiclip. How weird is that?
It's forcing the editors to mark their own footage, which is really the assistant's job. At least in FCP 6 you could mark the original angles prior to multiclipping and the markers would stay as you switched angles, or you could mark the original angles and then replace the angle in the multiclip with the marked angle and, again, the markers would stay affixed to the angle when you switched from angle to angle. Now that doesn't even work.
Help!
Any workaround out there?

Actually the 4:2:2 smoother is for prepping footage in a 4:2:2 color space for chroma keying (it prevents stairstepping due to the blocky chroma values). It is the right setting for DVCPRO HD.
Sure about that? because it already is in a 4:2:2 color space, and there are no stair steps. Only DV has those ugly stair steps. I believe this is for DV. I have never used it, and I have comped a lot of DVCPRO HD.
am using the Chroma Keyer filter from FCP (possibly derived from Primatte?
Nope...Primatte is a NEW filter in FCP 7. The built in Chroma Keyer in FCP downright *****. I use DV Matte Pro for simple stuff in FCP, and Primatte or Keylight for the more complex ones, and in AE or Motion. But Primatte is now in FCP 7...well, a "lite" version called Primatte RT.
If chroma smoothing is causing that issue...don't use it.
Shane

Font changes when copied from PDF to Word Docuemt

Hi ,
I have created a form which has text fields and static text and font style is Arial "10".In the preview i could see Someother fonts instead of Arial "10".
When i copied the text from PDF to Word document it is showing "Calibri (Body)" or "Myriad Pro". I need same font when i preview the form as well as when i copied from PDF to word.
I have created Custom component with Arial "10" even though in the preview i could see someother font.
What could be the reason ..
Thanks In advance.
Vjay

I can't think of why Acrobat/Reader wouldn't be displaying Arial. Try saving the form as pdf with Fonts Embedded in your Designer preferences.
Kyle

Slow creating AP Invoice when "Copy from" GRPO is used

Similar Messages

Maybe you are looking for