Slow data transfer on Disk images created in Mountain Lion
Hi apple community, since upgrading to OS 10.8, every blank disk image that I create using disk utility, no matter what partition setting I use, results in excrutiatingly slow data transfer speeds. I do not have this problem when I use disk images created on previous operating systems. For some reason it's taking about a minute to transfer 40mb to these folders. Any advice would be greatly appreciated, thanks.
It happens with both sparsebundle and DMG, and I've tried various partition settings, including hard disk, CD/DVD, Apple partition map, as well as no partition map.
Similar Messages
-
How to find the max data transfer rate(disk speed) supported by mobo?
I plan on replacing my current HDD with a new and bigger HDD.
For this I need to know the max data transfer rate(disk speed) that my mobo will support. However, dmidecode is not telling me that. Am I missing something?
Here's dmidecode:
# dmidecode 2.11
SMBIOS 2.5 present.
80 structures occupying 2858 bytes.
Table at 0x000F0450.
Handle 0xDA00, DMI type 218, 101 bytes
OEM-specific Type
Header and Data:
DA 65 00 DA B2 00 17 4B 0E 38 00 00 80 00 80 01
00 02 80 02 80 01 00 00 A0 00 A0 01 00 58 00 58
00 01 00 59 00 59 00 01 00 75 01 75 01 01 00 76
01 76 01 01 00 05 80 05 80 01 00 D1 01 19 00 01
00 15 02 19 00 02 00 1B 00 19 00 03 00 19 00 19
00 00 00 4A 02 4A 02 01 00 0C 80 0C 80 01 00 FF
FF 00 00 00 00
Handle 0xDA01, DMI type 218, 35 bytes
OEM-specific Type
Header and Data:
DA 23 01 DA B2 00 17 4B 0E 38 00 10 F5 10 F5 00
00 11 F5 11 F5 00 00 12 F5 12 F5 00 00 FF FF 00
00 00 00
Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
Vendor: Dell Inc.
Version: A17
Release Date: 04/06/2010
Address: 0xF0000
Runtime Size: 64 kB
ROM Size: 4096 kB
Characteristics:
PCI is supported
PNP is supported
APM is supported
BIOS is upgradeable
BIOS shadowing is allowed
ESCD support is available
Boot from CD is supported
Selectable boot is supported
EDD is supported
Japanese floppy for Toshiba 1.2 MB is supported (int 13h)
3.5"/720 kB floppy services are supported (int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
ACPI is supported
USB legacy is supported
BIOS boot specification is supported
Function key-initiated network boot is supported
Targeted content distribution is supported
BIOS Revision: 17.0
Handle 0x0100, DMI type 1, 27 bytes
System Information
Manufacturer: Dell Inc.
Product Name: OptiPlex 755
Version: Not Specified
UUID: 44454C4C-5900-1050-8033-C4C04F434731
Wake-up Type: Power Switch
SKU Number: Not Specified
Family: Not Specified
Handle 0x0200, DMI type 2, 8 bytes
Base Board Information
Manufacturer: Dell Inc.
Product Name: 0PU052
Version:
Handle 0x0300, DMI type 3, 13 bytes
Chassis Information
Manufacturer: Dell Inc.
Type: Space-saving
Lock: Not Present
Version: Not Specified
Asset Tag:
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Safe
Security Status: None
Handle 0x0400, DMI type 4, 40 bytes
Processor Information
Socket Designation: CPU
Type: Central Processor
Family: Xeon
Manufacturer: Intel
ID: 76 06 01 00 FF FB EB BF
Signature: Type 0, Family 6, Model 23, Stepping 6
Flags:
FPU (Floating-point unit on-chip)
VME (Virtual mode extension)
DE (Debugging extension)
PSE (Page size extension)
TSC (Time stamp counter)
MSR (Model specific registers)
PAE (Physical address extension)
MCE (Machine check exception)
CX8 (CMPXCHG8 instruction supported)
APIC (On-chip APIC hardware supported)
SEP (Fast system call)
MTRR (Memory type range registers)
PGE (Page global enable)
MCA (Machine check architecture)
CMOV (Conditional move instruction supported)
PAT (Page attribute table)
PSE-36 (36-bit page size extension)
CLFSH (CLFLUSH instruction supported)
DS (Debug store)
ACPI (ACPI supported)
MMX (MMX technology supported)
FXSR (FXSAVE and FXSTOR instructions supported)
SSE (Streaming SIMD extensions)
SSE2 (Streaming SIMD extensions 2)
SS (Self-snoop)
HTT (Multi-threading)
TM (Thermal monitor supported)
PBE (Pending break enabled)
Version: Not Specified
Voltage: 0.0 V
External Clock: 1333 MHz
Max Speed: 5200 MHz
Current Speed: 2666 MHz
Status: Populated, Enabled
Upgrade: Socket LGA775
L1 Cache Handle: 0x0700
L2 Cache Handle: 0x0701
L3 Cache Handle: Not Provided
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Core Count: 2
Core Enabled: 2
Thread Count: 2
Characteristics:
64-bit capable
Handle 0x0700, DMI type 7, 19 bytes
Cache Information
Socket Designation: Not Specified
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 32 kB
Maximum Size: 32 kB
Supported SRAM Types:
Other
Installed SRAM Type: Other
Speed: Unknown
Error Correction Type: None
System Type: Data
Associativity: 8-way Set-associative
Handle 0x0701, DMI type 7, 19 bytes
Cache Information
Socket Designation: Not Specified
Configuration: Enabled, Not Socketed, Level 2
Operational Mode: Varies With Memory Address
Location: Internal
Installed Size: 6144 kB
Maximum Size: 6144 kB
Supported SRAM Types:
Other
Installed SRAM Type: Other
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Unified
Associativity: <OUT OF SPEC>
Handle 0x0800, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: PARALLEL
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: DB-25 female
Port Type: Parallel Port PS/2
Handle 0x0801, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: SERIAL1
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: DB-9 male
Port Type: Serial Port 16550A Compatible
Handle 0x0802, DMI type 126, 9 bytes
Inactive
Handle 0x0803, DMI type 126, 9 bytes
Inactive
Handle 0x0804, DMI type 126, 9 bytes
Inactive
Handle 0x0805, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB1
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0806, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB2
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0807, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB3
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0808, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB4
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0809, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB5
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x080A, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB6
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x080B, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB7
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x080C, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB8
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x080D, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: ENET
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: RJ-45
Port Type: Network Port
Handle 0x080E, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: MIC
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x080F, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: LINE-OUT
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x0810, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: LINE-IN
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x0811, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: HP-OUT
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x0812, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: MONITOR
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: DB-15 female
Port Type: Video Port
Handle 0x090A, DMI type 9, 13 bytes
System Slot Information
Designation: SLOT1
Type: x1 Proprietary
Current Usage: In Use
Length: Long
Characteristics:
PME signal is supported
Handle 0x0901, DMI type 126, 13 bytes
Inactive
Handle 0x0902, DMI type 9, 13 bytes
System Slot Information
Designation: SLOT2
Type: 32-bit PCI
Current Usage: Available
Length: Long
ID: 2
Characteristics:
5.0 V is provided
3.3 V is provided
PME signal is supported
Handle 0x0903, DMI type 126, 13 bytes
Inactive
Handle 0x0904, DMI type 126, 13 bytes
Inactive
Handle 0x0905, DMI type 126, 13 bytes
Inactive
Handle 0x0906, DMI type 126, 13 bytes
Inactive
Handle 0x0907, DMI type 126, 13 bytes
Inactive
Handle 0x0908, DMI type 126, 13 bytes
Inactive
Handle 0x0A00, DMI type 10, 6 bytes
On Board Device Information
Type: Video
Status: Disabled
Description: Intel Graphics Media Accelerator 950
Handle 0x0A02, DMI type 10, 6 bytes
On Board Device Information
Type: Ethernet
Status: Enabled
Description: Intel Gigabit Ethernet Controller
Handle 0x0A03, DMI type 10, 6 bytes
On Board Device Information
Type: Sound
Status: Enabled
Description: Intel(R) High Definition Audio Controller
Handle 0x0B00, DMI type 11, 5 bytes
OEM Strings
String 1: www.dell.com
Handle 0x0D00, DMI type 13, 22 bytes
BIOS Language Information
Language Description Format: Long
Installable Languages: 1
en|US|iso8859-1
Currently Installed Language: en|US|iso8859-1
Handle 0x0F00, DMI type 15, 29 bytes
System Event Log
Area Length: 2049 bytes
Header Start Offset: 0x0000
Header Length: 16 bytes
Data Start Offset: 0x0010
Access Method: Memory-mapped physical 32-bit address
Access Address: 0xFFF01000
Status: Valid, Not Full
Change Token: 0x00000018
Header Format: Type 1
Supported Log Type Descriptors: 3
Descriptor 1: POST error
Data Format 1: POST results bitmap
Descriptor 2: System limit exceeded
Data Format 2: System management
Descriptor 3: Log area reset/cleared
Data Format 3: None
Handle 0x1000, DMI type 16, 15 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 8 GB
Error Information Handle: Not Provided
Number Of Devices: 4
Handle 0x1100, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x1000
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: DIMM_1
Bank Locator: Not Specified
Type: DDR2
Type Detail: Synchronous
Speed: 667 MHz
Manufacturer: AD00000000000000
Handle 0x1101, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x1000
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: DIMM_3
Bank Locator: Not Specified
Type: DDR2
Type Detail: Synchronous
Speed: 667 MHz
Handle 0x1102, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x1000
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: DIMM_2
Bank Locator: Not Specified
Type: DDR2
Type Detail: Synchronous
Speed: 667 MHz
Handle 0x1103, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x1000
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: DIMM_4
Bank Locator: Not Specified
Type: DDR2
Type Detail: Synchronous
Speed: 667 MHz
Handle 0x1300, DMI type 19, 15 bytes
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x000FDFFFFFF
Range Size: 4064 MB
Physical Array Handle: 0x1000
Partition Width: 1
Handle 0x1400, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0007FFFFFFF
Range Size: 2 GB
Physical Device Handle: 0x1100
Memory Array Mapped Address Handle: 0x1300
Partition Row Position: 1
Interleave Position: 1
Interleaved Data Depth: 1
Handle 0x1401, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00080000000
Ending Address: 0x000FDFFFFFF
Range Size: 2016 MB
Physical Device Handle: 0x1101
Memory Array Mapped Address Handle: 0x1300
Partition Row Position: 1
Interleave Position: 1
Interleaved Data Depth: 1
Handle 0x1402, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0007FFFFFFF
Range Size: 2 GB
Physical Device Handle: 0x1102
Memory Array Mapped Address Handle: 0x1300
Partition Row Position: 1
Interleave Position: 2
Interleaved Data Depth: 1
Handle 0x1403, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00080000000
Ending Address: 0x000FDFFFFFF
Range Size: 2016 MB
Physical Device Handle: 0x1103
Memory Array Mapped Address Handle: 0x1300
Partition Row Position: 1
Interleave Position: 2
Interleaved Data Depth: 1
Handle 0x1410, DMI type 126, 19 bytes
Inactive
Handle 0x1800, DMI type 24, 5 bytes
Hardware Security
Power-On Password Status: Enabled
Keyboard Password Status: Not Implemented
Administrator Password Status: Enabled
Front Panel Reset Status: Not Implemented
Handle 0x1900, DMI type 25, 9 bytes
System Power Controls
Next Scheduled Power-on: *-* 00:00:00
Handle 0x1B10, DMI type 27, 12 bytes
Cooling Device
Type: Fan
Status: OK
OEM-specific Information: 0x0000DD00
Handle 0x1B11, DMI type 27, 12 bytes
Cooling Device
Type: Fan
Status: OK
OEM-specific Information: 0x0000DD01
Handle 0x1B12, DMI type 126, 12 bytes
Inactive
Handle 0x1B13, DMI type 126, 12 bytes
Inactive
Handle 0x1B14, DMI type 126, 12 bytes
Inactive
Handle 0x2000, DMI type 32, 11 bytes
System Boot Information
Status: No errors detected
Handle 0x8100, DMI type 129, 8 bytes
OEM-specific Type
Header and Data:
81 08 00 81 01 01 02 01
Strings:
Intel_ASF
Intel_ASF_001
Handle 0x8200, DMI type 130, 20 bytes
OEM-specific Type
Header and Data:
82 14 00 82 24 41 4D 54 01 01 00 00 01 A5 0B 02
00 00 00 00
Handle 0x8300, DMI type 131, 64 bytes
OEM-specific Type
Header and Data:
83 40 00 83 14 00 00 00 00 00 C0 29 05 00 00 00
F8 00 4E 24 00 00 00 00 0D 00 00 00 02 00 03 00
19 04 14 00 01 00 01 02 C8 00 BD 10 00 00 00 00
00 00 00 00 FF 00 00 00 00 00 00 00 00 00 00 00
Handle 0x8800, DMI type 136, 6 bytes
OEM-specific Type
Header and Data:
88 06 00 88 5A 5A
Handle 0xD000, DMI type 208, 10 bytes
OEM-specific Type
Header and Data:
D0 0A 00 D0 01 03 FE 00 11 02
Handle 0xD100, DMI type 209, 12 bytes
OEM-specific Type
Header and Data:
D1 0C 00 D1 78 03 07 03 04 0F 80 05
Handle 0xD200, DMI type 210, 12 bytes
OEM-specific Type
Header and Data:
D2 0C 00 D2 F8 03 04 03 06 80 04 05
Handle 0xD201, DMI type 126, 12 bytes
Inactive
Handle 0xD400, DMI type 212, 242 bytes
OEM-specific Type
Header and Data:
D4 F2 00 D4 70 00 71 00 00 10 2D 2E 42 00 11 FE
01 43 00 11 FE 00 0F 00 25 FC 00 10 00 25 FC 01
11 00 25 FC 02 12 00 25 FC 03 00 00 25 F3 00 00
00 25 F3 04 00 00 25 F3 08 00 00 25 F3 0C 07 00
23 8F 00 08 00 23 F3 00 09 00 23 F3 04 0A 00 23
F3 08 0B 00 23 8F 10 0C 00 23 8F 20 0E 00 23 8F
30 0D 00 23 8C 40 A6 00 23 8C 41 A7 00 23 8C 42
05 01 22 FD 02 06 01 22 FD 00 8C 00 22 FE 00 8D
00 22 FE 01 9B 00 25 3F 40 9C 00 25 3F 00 09 01
25 3F 80 A1 00 26 F3 00 A2 00 26 F3 08 A3 00 26
F3 04 9F 00 26 FD 02 A0 00 26 FD 00 9D 00 11 FB
04 9E 00 11 FB 00 54 01 23 7F 00 55 01 23 7F 80
5C 00 78 BF 40 5D 00 78 BF 00 04 80 78 F5 0A 01
A0 78 F5 00 93 00 7B 7F 80 94 00 7B 7F 00 8A 00
37 DF 20 8B 00 37 DF 00 03 C0 67 00 05 FF FF 00
00 00
Handle 0xD401, DMI type 212, 172 bytes
OEM-specific Type
Header and Data:
D4 AC 01 D4 70 00 71 00 03 40 59 6D 2D 00 59 FC
02 2E 00 59 FC 00 6E 00 59 FC 01 E0 01 59 FC 03
28 00 59 3F 00 29 00 59 3F 40 2A 00 59 3F 80 2B
00 5A 00 00 2C 00 5B 00 00 55 00 59 F3 00 6D 00
59 F3 04 8E 00 59 F3 08 8F 00 59 F3 00 00 00 55
FB 04 00 00 55 FB 00 23 00 55 7F 00 22 00 55 7F
80 F5 00 58 BF 40 F6 00 58 BF 00 EB 00 55 FE 00
EA 00 55 FE 01 40 01 54 EF 00 41 01 54 EF 10 ED
00 54 F7 00 F0 00 54 F7 08 4A 01 53 DF 00 4B 01
53 DF 20 4C 01 53 7F 00 4D 01 53 7F 80 68 01 56
BF 00 69 01 56 BF 40 FF FF 00 00 00
Handle 0xD402, DMI type 212, 152 bytes
OEM-specific Type
Header and Data:
D4 98 02 D4 70 00 71 00 00 10 2D 2E 2D 01 21 FE
01 2E 01 21 FE 00 97 00 22 FB 00 98 00 22 FB 04
90 00 11 CF 00 91 00 11 CF 20 92 00 11 CF 10 E2
00 27 7F 00 E3 00 27 7F 80 E4 00 27 BF 00 E5 00
27 BF 40 D1 00 22 7F 80 D2 00 22 7F 00 45 01 22
BF 40 44 01 22 BF 00 36 01 21 F1 06 37 01 21 F1
02 38 01 21 F1 00 39 01 21 F1 04 2B 01 11 7F 80
2C 01 11 7F 00 4E 01 65 CF 00 4F 01 65 CF 10 D4
01 65 F3 00 D5 01 65 F3 04 D2 01 65 FC 00 D3 01
65 FC 01 FF FF 00 00 00
Handle 0xD403, DMI type 212, 157 bytes
OEM-specific Type
Header and Data:
D4 9D 03 D4 70 00 71 00 03 40 59 6D 17 01 52 FE
00 18 01 52 FE 01 19 01 52 FB 00 1A 01 52 FB 04
1B 01 52 FD 00 1C 01 52 FD 02 1D 01 52 F7 00 1E
01 52 F7 08 1F 01 52 EF 00 20 01 52 EF 10 21 01
52 BF 00 22 01 52 BF 40 87 00 59 DF 20 88 00 59
DF 00 E8 01 66 FD 00 E9 01 66 FD 02 02 02 53 BF
00 03 02 53 BF 40 04 02 53 EF 00 05 02 53 EF 10
06 02 66 DF 00 07 02 66 DF 20 08 02 66 EF 00 09
02 66 EF 10 17 02 66 F7 00 18 02 66 F7 08 44 02
52 BF 40 45 02 52 BF 00 FF FF 00 00 00
Handle 0xD800, DMI type 126, 9 bytes
Inactive
Handle 0xDD00, DMI type 221, 19 bytes
OEM-specific Type
Header and Data:
DD 13 00 DD 00 01 00 00 00 10 F5 00 00 00 00 00
00 00 00
Handle 0xDD01, DMI type 221, 19 bytes
OEM-specific Type
Header and Data:
DD 13 01 DD 00 01 00 00 00 11 F5 00 00 00 00 00
00 00 00
Handle 0xDD02, DMI type 221, 19 bytes
OEM-specific Type
Header and Data:
DD 13 02 DD 00 01 00 00 00 12 F5 00 00 00 00 00
00 00 00
Handle 0xDE00, DMI type 222, 16 bytes
OEM-specific Type
Header and Data:
DE 10 00 DE C1 0B 00 00 10 05 19 21 01 00 00 01
Handle 0x7F00, DMI type 127, 4 bytes
End Of Table
Hdparm also does not tell me the max data transfer rate (disk speed) of my current drive although this link : www.wdc.com/en/library/sata/2879-001146.pdf says that it is 3.0Gb/s
and here's hdparm -I /dev/sda
/dev/sda:
ATA device, with non-removable media
Model Number: WDC WD800JD-75JNC0
Firmware Revision: 06.01C06
Standards:
Supported: 6 5 4
Likely used: 8
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
CHS current addressable sectors: 16514064
LBA user addressable sectors: 156250000
Logical/Physical Sector size: 512 bytes
device size with M = 1024*1024: 76293 MBytes
device size with M = 1000*1000: 80000 MBytes (80 GB)
cache/buffer size = 8192 KBytes
Capabilities:
LBA, IORDY(can be disabled)
Standby timer values: spec'd by Standard, with device specific minimum
R/W multiple sector transfer: Max = 16 Current = 8
Recommended acoustic management value: 128, current value: 254
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* Host Protected Area feature set
* WRITE_BUFFER command
* READ_BUFFER command
* DOWNLOAD_MICROCODE
SET_MAX security extension
Automatic Acoustic Management feature set
* Device Configuration Overlay feature set
* Mandatory FLUSH_CACHE
* SMART error logging
* SMART self-test
* Gen1 signaling speed (1.5Gb/s)
* Host-initiated interface power management
* SMART Command Transport (SCT) feature set
* SCT Long Sector Access (AC1)
* SCT LBA Segment Access (AC2)
* SCT Error Recovery Control (AC3)
* SCT Features Control (AC4)
* SCT Data Tables (AC5)
Security:
Master password revision code = 65534
supported
not enabled
not locked
frozen
not expired: security count
not supported: enhanced erase
Checksum: correct
Last edited by Inxsible (2011-03-27 04:40:49)I just checked my BIOS and my current setting is set at IDE although it also mentions that the default should be AHCI. Currently I have a dual boot of Windows 7 (need it for Tax software) and Arch
So I guess, when I get the new HDD, I will first set it to AHCI and then install the OSes on it. See if NCQ helps any, and if not I will turn it back and re-install (if I have to). I am planning to have Windows only in virtualbox in the new drive.
Anyhoo, while I was in the BIOS I found two things which I had questions about :
1) Under Onboard Devices --> Integrated NIC , my setting is currently set at "On w/PXE" and it says the default should be just "On". Would it be ok to change it back to On since its a single machine and its not booting an OS on any server. I just don't want to have to re-install anything now since I will be doing that in the new HDD.
2) How would I know whether my BIOS would support a 64 bit OS in Virtualbox? I checked some setting under Virtualization, but they weren't very clear.
I will edit this post and let you know exactly what settings were present under the Virtualization sub-section. -
IMovie data on a disk image?
I use(d) iMovie to cut clips for my school and therefore I want to store the events and projects etc. on their server. We don't want to store it on a external hard drive for security reasons.
Is there any possibility to store iMovie data on a disk image?any ideas!!
-
Unable to unlock encrypted disk images created with Snow Leopard using Lion
Anyone else unable to unlock encrypted disk images created with Leopard and Snow Leopard with Lion? I know that they made changes with the release of FileVault 2 on Lion and Snow Leopard cannot use Lion encrypted disks but I thought it was backwards compatible where Lion should still be able to work with Snow Leopard created images (it was in the pre-release versions of Lion).
When attempting to mount an encrypted disk image created with Snow Leopard on Lion the normal password prompt appears but then just reappears every time the password is entered and does not unlock and mount the image. I'm positive the correct password is being entered and it works just fine when done on a machine running Snow Leopard.Not in cases when the computer successfully boots to one OS but produces three beeps when an attempt is made to boot it to another. If it really was a RAM problem that serious, the computer wouldn't get as far as checking the OS version, and it has no problems booting Lion. In the event of a minor RAM problem, it wouldn't produce three beeps like that at all.
(67955) -
Mail created w/ mountain Lion will not open in SL10.6.8, or OS X yosemite. How can I convert it to open?
After a second call to AppleCare, they had advised me differently than before. Once they found out that my personal computer has Mac OS X Lion installed from the App Store, they suggested I simply upgrade my parents computer to Lion.
So, I used my download from the App Store and upgraded. It went smoothly, but Mail still will not open properly. And instead of the original error message, it comes up with this:
"Check with your developer to make sure Mail can work with your version of Mac OS X. You may need to reinstall the application. Check if there are any updates available for the application."
How can I re-install just Mail? A startup disk is not accessible for me right now. Can I download the latest version of Mail and install it from the Apple.com website? -
Unable to boot disk utility or reinstall Mountain Lion
Hello,
I bought an iMac via ebay and I am unable to boot to disk utility and reinstall mountain lion becouse the guy I bought it from didnt delete the users nor reinstall OS
I have a Pc keyboard and am pressing the correct command+r but mac just hangs on apple sign and loading.
I can enter single user terminal and this is what I did and can do. There are 4 users in the /Users
tried following;
/sbin/fsck -fy
disk is ok
/launchctl load /System/Library/LaunchDaemons/com.apple.DirectoryServicesLocal.plist
Bug:launchctl.c:2344 (25952):2: (dbfd = open(g_job_overrides_db_path, 0_RDONLY | 0_EXLOCK | 0_CREAT, S_IRUSR | S_IWUSR)) != - 1
launch_msg(): Socket is not connected
I am connected to the internet via ethernet and I am stuck here not knowing what to do! I dont have an original DVD from Apple but I do have an image on the DVD.
There is no other mac in my house either and I cant make bootable usb or firewire.
Any suggestions on where to go from here or I am screwed?
Thanks in advanceApr 7, 2013 7:42 AM (in response to daiktsu)
@daiktsu: I wonder why these two are helping you at all.
@sls and Radiation: I admire your patience with this troll.
Unreal ! hahaha , congrats to all 3 - Lex, SSLS and Radiation for taking the HIGH road . Now that is CON"TROL" ! -
No startup disk with OS X Mountain Lion
I just bought a new MacBook Pro Retina running OS X Mountain Lion 10.8.2.
It did not come with any startup / 'emergency bootup' disk like previous Macs.
I have seen the site's articles on 'Internet Recovery', but Is there any way of getting the OS X software from the Apple Support site, and then burning this to a disk in case of future need?
Any advice would be appreciated.To reinstall OS X, repair permissions..., you have Recovery HD, a special partition from where you can start pressing Command and R keys while your Mac is starting. See > http://support.apple.com/kb/HT4718
If you want to create a Mountain Lion bootable drive, first open App Store, go to Purchases tab and download Mountain Lion. Then, you can use Lion Diskmaker to create a bootable DVD or USB drive > http://liondiskmaker.com
If you don't see Mountain Lion, your Mac is using a special OS X version that it's not available in the App Store, so you can't create a bootable drive -
I saved a document created on mountain lion on my flash drive. I cannot open the falsh drive on my other computer which is snow leopard. I was able to go back and forth until I installed snow leopard. Is this normal?
How is the flash drive formatted?
And, which application and which format did you use/save the document in? -
Cannot open disk image created in Snow Leopard
I created an encrypted disk image in Snow Leopard. When I'm running Mavericks, it asks for the password, then the folder doesn't appear anywhere. Disk Utility shows it as mounted, but it is not visible in the Finder or in the sidebar as a mounted volume usually is. First Aid says all is OK.Unmount with Disk Utility, then it doesn't even ask for a password when reopening is attempted. Nothing happens. What's going on?
sdl3 wrote:
OK... I opened iDVD, found my project, and selected 'file', 'save as disk image'. The disk image was created (took almost 3 hours this way!). now, when i open disk utility, i can see the image there. i placed a blank DVD in the computer, selected the image in disk utility and clicked 'burn'. when i placed the burned DVD in my DVD player, it says it cannot read the disk! my understanding is that creating a disk image is the smart way to keep backup copies of my home made DVD's but if I can't burn playable replacement DVD's that obviously negates this option. Is there something I'm doing wrong?
Advice above is 'spot on' : Do 'save as disk image'INSIDE iDVD. The disk image should be playable in anything which PLAYs DVD VIDEO_TS Folders: DVD Player, Mpegstreamclip, VLC.... I'm sure the only reason it took almost 3 hours this way is because iDVD Wasn't finished encoding/finalising the project....
W/O changes, subsequent Burns shd be as fast as any other DVD Burn (Altho, as I think was suggested, Burn at slow speed on slwo media is a very wise move.
CAVEAT: Burning using OTHER tools - from folder etc is not alway going to 'get everything' iDVD Changes, assets/work /temp files may be kept elsewhere.. etc etc.
INSIDE iDVD is the only safe way of 'getting it all.
best,
[PS: Hitchhikers' advice: Don't panic: This is very mature stuff now, you have a zillion options, most of them work very very well.- Good Luck] -
How does Time Capsule treat data other than disk images?
Hi there
I have a 3TB TC to use primarily as a wireless backup, as intended by Apple.
However, I wish to temporarily transfer a couple of GBs of data to it for transferring across to another machine.
I seem able to do the above, but my question is: how does the TC treat the two different types of data?
- Is it a better idea to partition the drive first?
- Is the TC likely to automatically delete the original data, like it does with old disk images, when the disk gets full?
- Can the TC handle the disk images and the original data side-by-side?
Just need some help understanding the 'Apple Magic' with this one!
I do realise that having the original data on the TC won't help me if it fails, but like I said, this is a temporary measure. Please don't post about this, as you won't win yourself any points - you'll just look like a smart-*** and annoy everyone.
Thanks in advance!1. The Time Capsule will not automatically delete data that wasn't originally put on it as part of a Time Machine backup.
2. It isn't possible to partition the Time Capsule. Network drives can only be partitioned by software specifically designed to work with that drive.
(67818) -
How Can I Transfer My Disk Image to An Identical Macbook Pro?
Hi there,
I'm attempting to make an exact copy of my primary Macbook Pro's Disk Image (we'll call it Computer A) and transfer it to a nearly identical Macbook Pro (Computer B) so that it may function as a backup on the road. I use my computer for musical performance and need to have a backup ready to go in the event of any show-stopping bugs. I need to be able to open Computer B in case my existing one fails.
I've already made a copy of Computer A's entire disk image using SuperDuper! and now need to know what steps I can take to overwrite the hard drive of Computer B with Computer A's disk image, thus making a perfect clone of Computer A.
On Computer A I am running Yosemite 10.10.1 on a 13-inch Mid 2010 Macbook Pro w/ a 2.66 GHz Intel Core 2 Duo and 8 gigs of 1067 MHz DDR3 RAM.
Computer B is a Macbook Pro (Mid 2009) currently running OSX 10.5.8 (as it's old owner fell behind on OS updates) w/ 2.53 GHz Intel Core 2 Duo and 4GB of 1067 MHz DDR3 RAM.
Will the Migration Assistant be able to do what I'm expecting? Are there any potential pitfalls I should look out for? Is Macbook Pro the best community to pitch this question?You may try SMC and PRAM resets:
http://support.apple.com/en-us/HT201295
http://support.apple.com/en-us/HT204063
If no success, then you have a hardware problem. Make an appointment at an Apple store genius bar for a FREE evaluation.
Ciao. -
"Error #-1 was reported..." No disk image created
I created a new project, using the iDVD 4.0 movie projector theme. I dropped a 75 minute movie onto the theme that I created in Final Cut Pro and exported as a self contained movie. It has chapters and there are 5 pages of scene selection submenus. I put a :30 clip into the drop zone in the main menu and each of the submenu pages. I changed the default font to American Typewriter, and its color to white instead of the default color. All seemed well.
I chose Save as Disk Image and let it rip. I checked on it occasionally, and it seemed to be burning right along; I could see the footage passing in the burn window. At the end of the ordeal, I got a message that "Error #-1 was reported...", and I have no disk image and no encoded assets.
What's up with that? I had saved an almost identical project as a disk image a couple of days ago, and have used the same two movies for this one. The differences are that I made a couple of fixes in the movie, and that I exported as self contained instead of reference movie.
I have been using iDVD 5 since it came out, and had very good luck. But this project is giving me a headache. Any suggestions?
Thanks.
BCTo follow up on this, I found that by switching to a completely different theme, my error message did not recur. So then I went back to my original theme (the movie projector) and did a test with a short clip, and I did not get the error.
I did the test on the movie projector theme without changing anything about it; when I first did the project that generated the error, I had made changes to the font, position and color of the theme, and I had five pages of scene selection submenus. It's possible that something I edited didn't agree with iDVD, and I got my error.
But it was INFURIATING to wait six hours for a disc image to burn, only to find that it didn't work. In the end, I decided to go without a menu and have an autoplay DVD. I used a method I found here in the discussions:
http://karsten.schluter.googlepages.com/nothemedvd
I used the one labeled the hard way. It worked great!
BC
one hit, no errors -
Viewing a disk image created in iDVD6
After succesfully creating and burning a DVD project, and confirming it works on my TV/DVD player, I decided to make a disk image of the file for convenience of easily burning more copies later. The iDVD6 help page says "you can play it on your computer by double-clicking the disc image icon. You can move the disc image to another computer or hard disk, but you cannot edit it. When you're ready to burn the disc image to a DVD, use Disk Utility in Mac OS X."
I cannot play it by double-clicking (just opens folders named "AUDIO_TS" and "VIDEO_TS" wich contain files that are .ifo, .vob, etc). I used disk utility to burn a dvd from the image and it creates the same thing when read on the computer. TV/DVD player cannot read it at all.
Has anyone succesfully used the disk image feature in iDVD?
Thanks for any help you may be able to give.Nancy,
Welcome to the Apple Support Forums.
When you have created a disk image of a DVD on your hard drive, double-click the image file to mount the DVD on your desktop. Then, use Apple's DVD Player application (in your Applications folder) to open the VIDEO_TS folder on that mounted image for playing.
See: http://docs.info.apple.com/article.html?artnum=93006 and http://docs.info.apple.com/article.html?artnum=42724 for information on using Disk Utility to burn the disk image to writable media.
If you don't follow the intructions properly, you will end up creating a DVD disc in the Mac OS Extended format rather than the UDF format needed to play it back on settop DVD players. -
Slow data transfer between servers across ACE
Hello all,
We have been facing slowness in SFTP file transfer. All three tiers are in different Vlan on ACE module.
App Server1 to DB Servers (Data Transfer is slow 32KB)
App Server2 to DB Server (Data Transfer is OK)
DB Servers to Web Servers (Data Transfer is OK)
TestPC to App Server1 (Data Transfer is slow 32KB)
TestPC to App Server2 (Data Transfer is OK)
I have requested the customer on results of some other test cases, but before i start on ace, just checking if someone has faced similar problem.
Regards,
AkhtarSee this thread.
http://community.bt.com/t5/Other-BB-Queries/HomeHub-3-LAN-speeds-only-10Mb/m-p/238589/highlight/true...
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones. -
Megastick 511 slow data transfer
Hi
I have a 1GB Megastick that should support USB2.0 but it's data transfer is extremly slow. It doesn't give more than some 0.5 MB/s or even less. Is it some kind of firmware or software problem? I tried latest firmware but it did't help...https://forum-en.msi.com/index.php?topic=90221.0
https://forum-en.msi.com/index.php?topic=81136.0
the Search button is your friend...
now without knowing more details of the system you are connecting your MegaStick too, it is difficult to advise further...
Maybe you are looking for
-
Oracle Grid Installer cannot list available disks
Hi all, I'm trying to install Oracle Database 11g R2 64-bit with ASM on an Oracle Enterprise Linux 5.5 64-bit. The problem I'm facing is that the Grid Infrastructure Installer cannot list available disks. In the setp of creating Diskgroups, I only se
-
Ref cursor from anonymous block
I have no problem to get a ref cursor from a Fill method call with an anonymous pl/sql block. But if my anonymous block contains a DECLARE section, the dataset is not populated. ex: BEGIN OPEN :cuInscription FOR SELECT column FROM table; END; is ok b
-
Linking exturnal hardware to sync with logic
hello, i require help with linking my yamaha rs7000 with logic so that logic triggers the rs7000 sounds. i've been trying for several hours to to record and have been having problems. i can use the rs7000 to trigger logic but for some reason the firs
-
Hi guys, I am totally new in flex programming, right now I am trying to have a swf file of my air application. There is no error in my application and when I run the app it works well. I even can package the app and it works as well. when I run the a
-
In the client place the architecture team wants to implement a a node RAC cluster on Sun Solaris on Oracle 10g. But in order to minimize the interconnect traffic they want applications to connect only to one node and the other node will provide fail