Slow display of reports on remote ConfigMgr Console

Hi
I have an issue displaying reports within the ConfigMgr console, in remote consoles that are connected via 10 MB links it takes up to 15 minutes to display the reports.
All other admin tasks within the console work fine, also accessing the reports using the web interface is ok.
Has somebody seen this issue before?
Thanks for your help

Another option you might consider depending on the type and frequency of the report is using a report subscription.  This approach tends to work well for reports that are historical in nature, such as a weekly report on compliance.  These can be
delivered from the SQL Reporting Server via email or a file share.  For real-time on demand reports there will still be the same delays you are seeing. (Of course you can just run reports from SRS directly)
More information on subscriptions.
http://technet.microsoft.com/en-us/library/ms345234.aspx
http://technet.microsoft.com/en-us/library/ms160334.aspx
Stan

Similar Messages

  • Displaying a report with 250 000 rows in BI Publisher 11.1.1.6 == very slow

    Hi,
    I try to display a report with 250 000 rows in bi publisher 11.1.1.6.
    Running the SQL Request in TOAD take 20s.
    From bi publisher 11.1.1.6 this operation take more than 2 hour without result.
    The temp file show an xml file which increase (53 M to 70M to 100 M)
    I configure jvm (1.6_029) with the following parameters : Xms512m - Xmx2048 -XX:MaxPermSize=3072m
    My configuration is the following :
    REHL5 64bits
    8G RAM
    100G file system and 50 GB tmp file for bi publisher
    4 CPU
    Jdk Parameters:
    Xms512m -Xmx2048m -XX:MaxPermSize=3072m -XX:UseParallelGC.
    Total CPU usage : 25%
    Live Threads : 85 threads
    Used : 665 Mb
    Commited : 908 Mb
    GC time :
    8.047 s on PS MarkSweep (3 collections)
    8.625 s on PS Scavenge (242 collections)
    Any idea to increase performance or other will be appreciate.
    Thank you
    Mams

    If you are generating a PDF output, select "PDF Compression" option in the properties. Ensure you reduce all the log levels to "Low". Ensure there are no (or minimal) calculations/formulas in the report template.

  • Sample code for slow moving material report?

    Hi all,
    I have a requirement to display slow moving mateial report on a particular goods issue date and material wise.
    The basic requirements are
    1. Movement type '261'  and material, plant are select-options.
    2.last goods movement date based on  parameter.
    3. Display the quantity available
    but here i am getting a problem that i couldn't find the last goods movement for that particular material with specific storage location as one material document containing more than one item. So please help? Also what logic i have to use to display quantity available?
    Please specify the sample code or logic for above requirement?
    Any custom slow moving report codes also very helpful?
    Thanks,
    Vamshi

    >
    VAMSHI KRISHNA wrote:
    > Solved.
    ....Shaved.

  • Slow moving items report for project stock

    Hi ALL,
    We are using project stock to manage all of our inventory. As the standard slow moving items report (MC46) does not contain project stock (special stock Q), we would like to develop a report then. "Slow moving" should be identified by material, plant, storage location and WBS.
    Has any had this experience? What's the main data logic for this report?
    Thanks a lot!!

    Dear,
    Do One thing.. First goto MB5B - stocks on posting date and select to display only special stock indicator Q (Project). By this you can abstract all Project materials. Save the output into Excel. (The main aim is first abstract the project stock materials into a list with a suitable transactions - MB5B or MB52).
    Then run MC50 or MC46 using these materials saved in excel file.
    Try this.
    Regards,
    Syed Hussain.

  • BW Slow moving item report in MC46 (R3) Format

    Dear Guys,
                    Regards.We got a requirement :
    1) A Slow moving Item report in BW in MC46 Report format(R3).Especially the client wants the "Period:Last Consumption(Days)" in the input selection criteria.The Standard BW Slow Moving item report has only Mat.Grp in the input selection and Caldays(Period from-to) in the Filter.Would appreciate your timely help on this...
    Manythanks
    Arun

    Hi Ramesh/Prasad,
                               Many thanks for your replies..Well i dont want the input selection for "CALDAY" but rather for "DAYS-----Like user input as 100Days,60Days...."...They want to get the display of "Slow moving materials" for the Last 100 days or so...Any take on this?
    Manythanks
    Arun

  • SCCM: Reports not appearing in console

    The Reports node in the console, which is installed on my local machine, isn't expanding to show all the ConfigMgr reports. The reports node does expand on the console on the server (just a single primary site server with SQL and SSRS). I can reproduce the
    issue using an account with full administrative access.
    Any ideas on how the reports node to show reports on the console on my machine?

    You can also try running  ReportViewer.exe (<ConfigMgrInstallDir>\tools\ConsoleSetup again) again. Plus check the certificates.
    Torsten Meringer | http://www.mssccmfaq.de

  • Extremely slow paging through reports - why?

    We are experiencing painfully slow paging through our JRC enabled Crystal Reports in one of our web applications.  It takes upwards of 30 seconds at times to go from one page in the viewer to the next.  We are using the JSF viewer tag to display the reports, so I don't know if there's a parameter that we need to set that we haven't?  In the past, we've deployed apps using the non-JSF JRC approach and haven't had this issue, so I'm thinking it's JSF related?  Any thoughts out there?  It would be a big help! 
    Thanks,
    Mike Brubaker

    This kind of performance can happen if you aren't storing the report object / reportsource in session.  If that happens, then the report has to be completely reloaded every time you go to a new page.
    A standard practice is to have one page load the report, set up the parameters / db logon, store it in session, and then redirect to a viewer page.  The viewer page simply retrieves the report out of session and then displays it.
    Shawn

  • Slow Loading Crystal Reports

    Post Author: mel
    CA Forum: .NET
    I am using CR XI R2 SP2 and I am experiencing slowness when accessing a report within my application.  Though the report is always displayed faster the second time, the first time the report is displayed can take anywhere from 5 to 20 seconds.  Overall, the time it takes to display the report is inconsistent.  I was able to trace the source of the slowness to the ReportDocument.Load(ReportPath) call.  Can anyone please offer suggestions as to the cause of the slowness, and how to improve the speed?
    Thank you.

    Post Author: ole
    CA Forum: .NET
    Yes, I have same problem. When using CR in .NET-Application the first time, the initialisation is very slow. To work around I made a background threadafter starting the application with some CR operations like ReportDocument.Load(). When user will start CR really the initialization is done. Another fact: On users machine database connection has to be set dynamically by application at runtime. On Reportdocument.load the report looks for developper database (of course not reachable). Of course that is extremely slow. I made a workaround to load report once slowly, change database connection, and save report with new database connection for the next time. Next time loading is much faster.I don´t understand, why CR is looking for an useless database server when loading before I can set the real connection. Nevertheless: Performance of CR.NET should be improved. 

  • Budget is not getting displayed in Report S_ALR_87013558

    Hi Friends,
    For project the budget is not getting displayed in Report S_ALR_87013558 though the budget is planned by TCode: CJ30 and released also by TCode: CJ32
    Is there any setting in customising in information systems to display in the report.
    Please treat this as quite urgent.
    Regards,
    Manohar N

    Hi Sridhar,
    Thanks for the input.
    But still Budget is not appearing in the report, even after running CJBN & CJEN.
    I had a look into CJ30 but the overall Budget is available. Is there any change required in the report.
    Regards,
    Selva

  • Complete data not displayed in Report

    Hi forum,
    I have a cube based on data source 0FI_AR_4,which is updated via an ODS.I have created a query for ageging analysis.The query uses Referrence number ( invoice number) to display the receivables of various customers and number of days from due date.
    To my surprise many invoice numbers are not being displayed in the query, but when i restrict the query to the invoice numbers which are not being displayed the report generated is able to display all the doccuments.
    I have checked the data in the cube and all the invoice numbers are flowing well fro R/3.
    My only way of saying thanks to the people who solve the issue or provide helpful answers is by assigining points.
    Regds
    Suhel

    hello
    This is simple problem
    The result the query fetches is not able to display in the number of cells provided in the excel sheet
    So when you restrict the data, the query is able to show all the data fetched by accomadating in the columns available in the excel.
    Here in your case , there are not enough columns in the excel sheet to display all data
    Regards
    N Ganesh

  • Text data is not displaying at Report level for an Infoobject Item name

    Hi All,
    Texts data is maintained at Info object level but text information is not displaying at Report level for an object.  I have set the property at query level as "Text", but at report level it is displaying key values of the object, not displaying texts information.  This problem occured in QA(Quality) system but not replicated in Production system.  I have checked all properties at backend and query level and compared the same between QA and Production system didn't find any difference.
    Please suggest what might be the cause: at report level it is displaying key values instead of the textual information even text data is mainintained at backend.  In production it is displaying textal data for the IO.
    Thanks in advance.

    Hi All,
    Thanks for your valuable information.  I have changed the setting under Advanced tab as "Master data" for Access type for results values, but didn't solved the problem still it showing key information for the IO.
    In Production system the report displaying texts information for the IO, but in QA its displaying key information. The problem exits only in QA, its working fine in DEv and Production.
    As per my understanding might be the issue with Patches will be checking with Basis team on the same.
    Please suggest if you have any alternatives to fix the issue.

  • I need to display a Report which contain -- del QTY  and  INV QTY   in one

    Hi ALL,
    I need to display a Report which contain
    <b>Customer  , Material , Order No, Delivery No, Billing No , Order Qty , Dev Qty, Bill Qty , Invoiced Qty  and There Values  in One Line  .</b>
    How can I Display, When I am executing the report against the Delivery Number Bill Qty and Invoiced Qty is showing Hash ( # ).
    Do I need to right any Routines for this, if I am correct,  where I have to write that code and what is the code ,
    What are the Consolidation  routines ?????
    I am working on BI 7.
    Regards ,
    Shaik
    Message was edited by:
            shaik

    Frst check in backend, which all cubes have got data for each of three..
    Corresponding you can go ahead with Multi/Infoset..
    Look for reference no in all three cubes and pick one order and track tht by reference no in all cubes,
    Hope it helps..
    Thanks for points assigned

  • Report 6i/Webdb -Not able to display the report in the browser - rep- 3002 error.

    Would someone tell what I missed, I have set up the following:
    1) a report using report builder on NT
    2) my database is in Unix
    3) my report server is started in NT
    4) I run webdb listener for the following code: http://myweb.com/cgi/rwcgi60.exe?server=repserver+report=myreport+userid=usid/pw/connect_string+destype=cache+desformat=html. Then, I receive this message:
    Error: The requested URL was not found, or cannot be served at this time.
    Oracle Reports Server CGI - Report Job has terminated with error.
    Reports Server Replies:
    REP-3002: Error initializing printer. Please make sure a printer is installed.
    Why is it thinking I want to use the printer whereas I want to display the report in the browser?. Any help would be appreciated.
    null

    It sounds like that your Web CGI did not configure right. To test if your CGI configuration is correct, type:
    http://hostname:port/cgi-bin/rwcgi60exe?
    If you get a help screen, then you should be able to bring up your report.
    Regards,
    Xiaoling

  • Field symbol has not yet been defined-ALV Grid Display in Report

    Hi all,
              Iam calling a Function module for ALV grid display in Report programming. Its throwing the Error message Field Symbol has not yet defined. Can any one suggest what i have to do regarding it?

    Hi,
    <li> This is problem with fieldcatalog.
    <li> Check field names or table name in small letters in quotes while building fieldcatalog internal table
    <li> Check the fieldcatalog internal table , whether it has same fields as in data table which is shown using GRID_DISPLAY function module.
    Thanks
    Venkat.O

  • Can not display BI report in Web ui

    I created reporting profile with both bi and interactive reporting active and assigned to the business role functional profile
    I gave the BI connection client in the report that I wanted. When I select the report in webu ui, it's taking me to a sign on pad. I assume this for BI sign on pad and When i enter sign on, it's not taking me any where.
    This just a standard report in CRM My top 5 quotations. All necessary steps in basic bi connection, basic sales analytics are done too
    How does the the connection between BI and crm works?
    Please advise

    Hi Experts,
    We are using Webiu 2007 with BI 7. 
    We linked our sandbox to RWT system to test the report output. In my CRS, I have source system RWT defined and the same way in BI also we have assigned CRS to link these systems together. It is my understanding that when we select the report, we are just calling the from BI into CRM.  I have done the following steps in CRM
    1) Created reporting profile in CRM analytics as both BI and CRM interactive reporting activated
    2) Assigned this reporting profile to business role
    3) I selected My-Top-5 quotation report and gave the BI system in display  bi reports
    4) I can see the report on webui.
    Problem: When I selected the report,  a logon pad appears and I enter RWT user id and password, it's doing nothing.  But, I have another user who is logging in for the first time got an error "Error loading template "OTPLB_OCRM_QUTO_Q0001_1 notification number BRAIN276". When the same new user tried to login second or third time, it's not showing the error and nothing is happening when we enter userid and pass word.  But, we can logon to GUI RWT.
    We tried to pull a query view report and web template reports see if we can display data. The BI team gave me couple of info objects keys. 
    1) I created the report with object key and type as one for 3.x template and one for 3.x query view
    2) Created logical links for these two reports and selected these two reports in business role. Now the reports are showing in webui
    3) When I select any of these, it taking to a blank screen without any logon screen. 
    BW team says that these reports are running with data in their system.
    Can someone please help?

Maybe you are looking for