Slow down after crash
I recently had a total crash. I discovered that Time Machine had not worked since March, my fault. I am rebuilding the system and starting to use it. It seems to slow things down quite a bit when it is backing up. I don't remember this being the case before. It also gives a lot of errors. Does this mean that there are some files that simply will not be backed up on that current past?
I can only hope, I guess, that on the next attempt those files are actually copied. Has anyone else noticed this slowing down of the system? Is it recommended that Time Machine be used on an on and off basis. I guess that would be one way to determine if Time Machine is responsible for the slowness and the wheel popping up as often as it does.
LarryJay wrote:
I recently had a total crash. I discovered that Time Machine had not worked since March, my fault. I am rebuilding the system and starting to use it. It seems to slow things down quite a bit when it is backing up.
It's first backup, or the first one after a long time, will be a full one -- everything on your system, unless you've excluded things. So yes, that one will take quite a while. Thereafter, they should be very quick.
I don't remember this being the case before. It also gives a lot of errors. Does this mean that there are some files that simply will not be backed up on that current past?
Is it recommended that Time Machine be used on an on and off basis.
No, it's not. TM usually works best if you let it do it's normal hourly backups. If not, then something is wrong.
Start with the Time Machine - Troubleshooting *User Tip* at the top of this forum. It will lead you through the process of finding the messages and fixing whatever's wrong.
Follow it through, step by step. If it doesn't lead to a solution, copy and post the messages here, along with what you've done, what the results were, and your setup.
Similar Messages
-
Hello, I have MacBook pro Mid 2012. After update to Mavericks, my laptop really slowed down, started crashing, lagging, especially Safari, Launchpad have lags, in general video performace is bad, also Activity Monitor shows that browser takes 100% CPU, temperatures are higher in comparison to Mountain Lion.
Resetting SMC, PRAM and reinstall don't help.OK, so I booted OS X Recovery and Disk Utility - according to it, everything is fine.
Next, EtreCheck:
Hardware Information:
MacBook Pro (15-inch, Mid 2012)
MacBook Pro - model: MacBookPro9,1
1 2.3 GHz Intel Core i7 CPU: 4 cores
4 GB RAM
Video Information:
Intel HD Graphics 4000 - VRAM: 1024 MB
NVIDIA GeForce GT 650M - VRAM: 512 MB
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0
AirPlay: Version: 1.9
AppleAVBAudio: Version: 2.0.0
iSightAudio: Version: 7.7.3
Startup Items:
FanControlDaemon - Path: /Library/StartupItems/FanControlDaemon
System Software:
OS X 10.9 (13A603) - Uptime: 0 days 0:4:36
Disk Information:
TOSHIBA MK5065GSXF disk0 : (500,11 GB)
EFI (disk0s1) <not mounted>: 209,7 MB
Macintosh HD (disk0s2) /: 499,25 GB (152,22 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
HL-DT-ST DVDRW GS31N
USB Information:
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
FireWire Information:
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Kernel Extensions:
com.rim.driver.BlackBerryUSBDriverInt (0.0.74)
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[loaded] com.adobe.fpsaud.plist
[loaded] com.adobe.SwitchBoard.plist
[loaded] com.autodesk.backburner_manager.plist
[loaded] com.autodesk.backburner_server.plist
[loaded] com.autodesk.backburner_start.plist
[loaded] com.microsoft.office.licensing.helper.plist
[loaded] com.rim.BBDaemon.plist
Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist
[loaded] com.hp.messagecenter.launcher.plist
[loaded] com.rim.BBAlbumArtCacher.plist
[loaded] com.rim.BBLaunchAgent.plist
[loaded] com.wacom.pentablet.plist
User Launch Agents:
[loaded] com.adobe.ARM.[...].plist
[loaded] com.facebook.videochat.annareklinska.plist
[loaded] com.google.Chrome.framework.plist
[failed] com.google.GoogleContactSyncAgent.plist
[loaded] com.google.keystone.agent.plist
[loaded] com.spotify.webhelper.plist
User Login Items:
iTunesHelper
VMware Fusion Helper
Dropbox
Dropbox
3rd Party Preference Panes:
PenTablet
Fan Control
Flash Player
Flip4Mac WMV
Java
MacFUSE (Tuxera)
Perian
Internet Plug-ins:
AdobePDFViewer.plugin
AdobePDFViewerNPAPI.plugin
Default Browser.plugin
DirectorShockwave.plugin
Flash Player.plugin
FlashPlayer-10.6.plugin
Flip4Mac WMV Plugin.plugin
GDL Web Plugin.plugin
JavaAppletPlugin.plugin
NP_2020Player_IKEA.plugin
QuickTime Plugin.plugin
SharePointBrowserPlugin.plugin
Silverlight.plugin
WacomNetscape.plugin
WacomTabletPlugin.plugin
User Internet Plug-ins:
Bad Fonts:
None
Time Machine:
Time Machine not configured!
Top Processes by CPU:
6% mds
2% WindowServer
1% EtreCheck
1% TextEdit
1% ubd
1% mds_stores
0% ocspd
0% BBLaunchAgent
0% coreservicesd
0% fontd
Top Processes by Memory:
258 MB Safari
135 MB com.apple.IconServicesAgent
123 MB com.apple.WebKit.WebContent
83 MB mds_stores
70 MB Dropbox
66 MB WindowServer
37 MB Dock
37 MB com.apple.appkit.xpc.openAndSavePanelService
33 MB mds
29 MB Finder
Virtual Memory Statistics:
1.25 GB Free RAM
1.70 GB Active RAM
456 MB Inactive RAM
610 MB Wired RAM
351 MB Page-ins
0 B Page-outs
Then, I started in Safe Mode and still there was poor graphic? video? performance, I understand that it shouldn't be perfectly smooth, but there was weird flashing, crashing and stuff. Photo:
You can see some of it (it's from Safari, but for example Launchpad is even worse). It's like that all the time in Safe Mode. I don't know if that's normal.
And I did SMC reset again, but it also didn't help.
Oh and apps often crash when I first start them, but then, I repeat action and they open.
Funny story, Mavericks should improve performance, better video memory and ram, but I'm experiencing completely different story. -
System Slow-Down After Printing
I recently installed Mountain Lion. Over the last couple of weeks I have noticed a significant operating system (10.8.2) slow down after printing with my Epson R3000 printer. This happens after every printing session. When I say slow-down I mean significant delays and dreading "beachballs" when opening applications, selecting menu items or anything else I should choose to do. I'm left with re-starting the computer to get going normally again.After re-atarting I have gone to "verify permissions" and I get approx "5" pages of permission errors, all associated with the printer library in some fashion or another. I then repair all those permissions and re-start my MacPro. The operating system then works as normal and I can use the computer with no problems (until I start printing again). I mainly use the computer for photo editing with Adobe Photoshop CS6, Adobe Lightroom 4 and Aperture 3.2.
I did not have this problem before upgrading to Mountain Lion (and then to 10.8.2). I did not get "significant" permission errors before upgrading. Since all printer drivers for this printer are handled now by Apple via the "new" Software Update process I can't even re-download the Epson printer driver and start over. I'm completely at a loss as to what, associated with the printer function, is causing these "significant" permission errors and subsequent operating system slow down. My printer is almost brand new and was working flawlessly before Mountain Lion. Let me be clear though, I can print fine. My problem is the system slow down after using the print function which I am only guessing has something to do with the "5" pages of permission errors after printting photos (with CS6/Lightroom/Aperture).
Incidently, I am not in any way a computer expert. Verifying and repairing permissions is about all I know how to do that's why I need help. I also just thought I would try the forums first before going to technical support to see what people thought about this.
Again, I repair the permission errors, re-start my system and all is fine. Any further suggestions would be deeply appreciated.When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting. -
Slow down after installing Lion OS
My Macbook pro later than 2009 model slowed down after installing the new OS Lion
any suggestions to speed it upFirst suggestion ,there have been a number of identical user questions like yours, in the Lion Community. If you want to talk to other MacBook Pro owners, try the forum they have.
http://www.apple.com/support/macbookpro
What you do not need is some gizmo to "speed up" or clean caches etc.
Maybe you need to make more room on your hard drive, or add more RAM.
For now, hold down Command-R and run Disk Utility to check the health of your system drive (Lion Recovery Mode)
http://www.apple.com/support/lion -
Compleat system slow down after current updates
Has anyone learned why we all seem to have a compleat system slow down after the current set of updates? Everything works, but is VERY slow to respond. Even iTunes 7.1.1 plays video choppy now. Audio track plays fine however. Odd.
-Apple //GSFirst of all, try repairing your permissions with Applications> Utilities> Disk Utility. Select the hard drive you're running off of and then click the Repair Permissions button.
If that doesn't work I'd do an archive and install:
http://docs.info.apple.com/article.html?artnum=107120
Then run the combo update(s) instead of the consecutive ones. That seems to be working for a lot of people, but it will probably take a while. -
System slow down after lion update 8/18/11
Has anyone else had a problem with their system slowing down after downloading the system update for Lion on 8/18? My system is not nearly as responsive and is only about two weeks old and have not installed any software other than Microsoft Office 2011 when I bought the machine. Any ideas?
Ok my system is booting and shutting down faster now.. This method worked for me:
First, I repaired the permissions:
1) Open up Disk Utility
2) Select your hard drive
3) Now select Repair Disk Permissions.
Then, I deleted the caches folder:
1) From the Finder's Go menu, select Go To Folder, and go to this folder: /Library
2) Delete everything inside the Caches folder (This might require the Admin Username & Password)
Finally, go to System Preferences and click on Startup Disc then click on your boot drive (In my case I've selected my HD labeled "Macintosh HD Mac OS X, 10.7.1". Now do a restart by clicking on the Restart button. If you don't have a Startup drive selected your mac will waste time at boot searching for a suitable boot drive !
I Hope this works for you as well.
Cheers! -
System slow down after upgrade to 10.10.2
Still have a slow down after updating to 10.10.2
Tried everything I can think of.
Get spinning color wheel for a long time when opening even small files. Scrolling through folders, cursor hangs for a moment. opening and saving takes much longer.
Used HD repair and repaired permissions and diagnosed HD. No problems.
Looking at Activity Monitor, I don't see anything that stand out-
-CWhen you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting. -
Has anyone noticed MacBook Air slowing down after installing Maverick
Has anyone noticed MacBook Air slowing down after installing Maverick?
Activity Monitor - Mavericks
Activity Monitor in Mavericks has significant changes
Performance Guide
Why is my computer slow
Why your Mac runs slower than it should
Slow Mac After Mavericks
Things you can do to resolve slowdowns see post by Kappy -
Lightroom workflow slows down after modifying an image
Hi fellow users,
Lightroom 4.3 runs smoothly if I work on unmodified images.
However, if I apply modifications on an image, retouching it afterwards becomes much slower, even if I render a preview AFTER I made modifications on the image.
I tell you an example: I import a raw file to the program and I render it`s preview. Then I retouch the image - it works very fast, no waiting time, no Loading overlay.
Where the problem starts: I import a raw file, I apply some modifications on it (for example a preset), then I render it`s preview - then I want to do more modifications on the image, which becomes very slow.
I was monitoring the cpu usage of the computer. In the first case, the cpu usage during modifying the image is normal.
In the second case, it goes up to 100%.
It seems that applying modifications on an image makes working on it slow, no matter if you have the most up-to-date preview or not.
Anyone knows if it is normal or not?
Is there any solution to this?
Thanks,
Tamas
My configuration:
Windows 7 64 bit (up to date)
Lightroom 4.3 64 bit
Fast PC
lightroom settings:
camera raw cache: 20gb
video cache: 10gbFirst of all, you can forget about the preview rendering, that's irrelevant. Previews are only used by the Library module, not the Develop module. In Develop, it's handled by the ACR cache.
Now, as for slowing down after initial adjustments, that's a variable I haven't looked out for. But it could well be correct (it would explain some weird results I got across two machines recently).
In general, Lightroom 4 performs well below expected standards on some systems, while others fly along, and it seems nobody can explain why. Long story, do a search on this forum and you'll come up with several lengthy threads. The problem is that there are so many variables in this that it's almost impossible to even define what "slow" means. And now you've added another (interesting) one... -
I have Windows 8.1 Pro (x64) installed on Alienware M17x. The slowdown mostly appears as slow response in the situation such as open a folder/window, open/close/switch tabs in IE, drag window, and there's also cursor lag. It gradually
slows down after system boot, noticeable after 3-4 hours, really slow after 8-9 hours.
I have thought about many possible processes which can cause this issue, and then I found out that it's caused by "explorer.exe". If I kill "explorer.exe", the speed suddenly becomes normal. Then, I restart explorer.exe
again, it stays normal, and then it still gradually slows down again after hours.
I have checked driver or software compatibility. Also, CPU usage and Disk usage is normal.
Please give some advises, reasoning, or solutions.SaccoSVD
The process that is causing the problem is called sidebar.exe and I am curious why it is running on a win 8 machine as I dont believe it is built in. (It seems to have over 22,000 instances launched so I suspect either malware or a broken app)
It is usually associated with a Vista machine, or updated win 7 machine. Did you do do a clean install? Have you run a malwarebytes scan?
Please download the free version of Malwarebytes.
Update it immediately.
Do a full system scan
Let us know the results at the end.
http://www.malwarebytes.org/products
Wanikiya and Dyami--Team Zigzag -
Illustrator begins to slow down after 10 to 15 minutes
Illustrator begins to slow down after 10 to 15 minutes, my system exceeds the minimum requirements. What gives?
Xeon Processor 3ghz
20gigs of ram
Win7 64bit
200gigs of storageSorry I forgot to mention that it's the Creative Cloud version.
-
Why do my loops slow down after many iterations
My Vi seems to freeze up or slow down after several iterations of the loop. This is an Analog Input Capture VI.
Attachments:
Final_Main_VI_with_working_amp.vi 456 KBFirst of all, thank you for your contribution. You are right to say that I have no need in changing the AI Config every time that the loop runs. But as this is supposed to be a soft-scope, I need to be able to update the parameters associated with AI Start while the loop is running (e.g. trigger level).
I have tried to move the AI Config subVI out of both loops but the error as a result is: "No transfer in progress for the specified source."
I also need a sampling rate of exactly 96kHz. I realize that the laptop clock cannot attain this value. Do you know how I could get exactly 96kHz.
Attachments:
Final_Main_VI_with_working_amp.vi 498 KB -
AME CS4 Batch - Slow Down After First File
I've been using AME to batch timelines from various different Premiere Pro projects. Problem is the first one in the batch will take the normal amount of time around 2 hours. Then everyone in the batch after that takes 5 hours.
If I stop the encode once it gets to the second file and slows. And then restart the program and put that one as first it renders in a fraction of the time....
Why does AME drastically slow down after the first file in the queue?Where do you close the ResultSet?
Where do you close the Statement?
Presumably you only create one connection for all users or you close it somewhere. -
Macbook WI-FI Slow down after Screensaver kicks in
I just got this new macbook a few days ago. Everything is been working great except for this problem. I am experiencing an internet slow down after the screensaver Flurry kicks in. as long as the screen saver doesnt kick in, the internet still works fine.
Does anyone has a solution to it or experienced something similar to my problem?
Any help is appreciated. thanks in advance.I encounter a similar problem using my girlfriends new Macbook (Intel Core 2 duo). Out of the box, i remember it working well and it was fast on my network using a Linksys WRT54G router (firmware v8.00.2). However, over the course of a few days, WiFi speeds deteriorated quickly.
This solution worked for me:
-Set the router to channel 3, 6 or 11
-Enable WEP encryption (mine is set to WEP 128bit)
-When entering the Key (key 1) into Airport prefix it with a *"$"* ie. "*$19C7B8C383489.....*" would be your key.
This is prior to adjusting settings on the router.
http://img37.picoodle.com/img/img37/5/12/15/t_macbook1m_b852f94.jpg
This is after adjusting settings on the router.
http://img27.picoodle.com/img/img27/5/12/15/t_macbook2m_7e443da.jpg -
Why does my data logging program slow down after a while?
A data logging program created with Labview 5.1. Slows down after a few weeks and creates files in the Temp. directory.Computer is Siemens Scenic pro 124 MB ram and AT-MIO-16XE50 Data acquisition board. Also using Solartron Dig. probes and Fieldpoint units.
Any chance that you are using Win 95/88/ME? Those OS's have well documented
memory leaks which will consume all your available memory if an application
is run long enough. Also there are some issues of memory management within
LabView in the allocation of memory.
The solution to the first is to switch to WinNT/2K. The second will be much
more difficult.
On Thu, 22 Feb 2001 03:19:12 -0800 (PST), Freek wrote:
>A data logging program created with Labview 5.1. Slows down after a
>few weeks and creates files in the Temp. directory.Computer is Siemens
>Scenic pro 124 MB ram and AT-MIO-16XE50 Data acquisition board. Also
>using Solartron Dig. probes and Fieldpoint units.
===========================================================================
SolidW
orks Research Partner National Instruments Alliance Member
Christopher Dubea Phone: (504) 847-2280
Vice President of Engineering Fax: (504) 847-2282
Moving Parts L.L.C. email: [email protected]
P. O. Box 6117 URL: http://www.movingpart.com
Slidell, LA 70469-6117
Maybe you are looking for
-
Error when Upgrading BI_UDI SP-9 to BI_UDI SP-20 from SDM
Hi Experts. can any one solve my problem its urgent. I am trying to upgrade BI_UDI SP-9 to BI_UDI SP-20,but it is giving me the error. The below is the entire log of the Error. <!LOGHEADER[START]/> <!HELP[Manual modification of the header may cause
-
[SOLVED]xinit as user - dri permission denied
I've tried to launch a game in a separate X instance with: xinit /usr/bin/ufo -- :1.0 vt2 xinit /usr/bin/ufo -- :1 xinit /usr/bin/env ufo -- :1 etc but I get very slow rendering and strange output. X.Org X Server 1.15.0 Release Date: 2013-12-27 X Pro
-
BI Content 7.57 SP4 Activating Process Chain
Hi, I am trying to activate a process chain from BI content . My source system is ERP 6.0. While collecting objects for activating this Process Chain BW gives an errors. It says some of DTP and Transformations are missing. I have put two of the error
-
Serial Number for creative suite 6 edu
Still trying to get my serial number for my CS6 pack have a closed case #0212129916 because i was on holidays overseas when i tried to activate. I am now back in Australia and want to install my product?
-
Oracle 9iAS dcmctl permission error
How do I configure Oracle 9iAS to permit a new user (domain account) the ability to run the dcmctl utility? Currently only the account used to install Oracle 9iAS is permitted to run the dcmctl utility. All other users receive the following error: dc