Slow down loads with ios 5.1

I have an iPad2 and iPhone4, Is anyone experiencing slower down loads speeds for Apps and Music under iOS 5.1?

The app is called Speed Test. I think that is what Diavonex is referring to. I have the app. I don't know that is absolutely reliable either or all that accurate. It is however, a starting point.
I think you just might experiencing what a lot of users are seeing - an overload on all of the Apple servers. With the new iOS to download and all of the apps that now need to be updated - things were a little sluggish for me for a couple of days. My download speeds for the app store seem pretty good now.
Have you even tried restarting or resetting your iPad to see if that helps?
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

Similar Messages

HT2404 I am trying to down load thenlatest iOS file and I have no software updates file to get it HELP!

How can I down load the iOS 5 on to my iPad I don't have a software updates

If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
 Cheers, Tom

Slow down issue with Premiere CS4 on a Mac pro

I am having a similar slow down issue with Premiere CS4 on a Mac pro, but I don't have bloated prproj file size.
Here is what I am working with:
Mac Pro intel quad core 2.8ghz
OSX 10.6.7 Snow Leopard
6Gigs RAM
3TB storage between 4 drives, each drive with about 50% free space
I am editing a 10 minute HD video from avchd files. The edited video is very heavy in photoshop files with a variety of different fx including green screen. The system has slowed down to almost a standstill. Anytime I move the playcurser, or try to do any action, it displays the spinning top "thinking" icon and takes 15 seconds to several minutes to unfreeze. I am often forced to force quit and I have gotten unexpected quits several times. The program also freezes on startup frequently.
No other programs are running. When I export with media encoder, it took about 4 hours to complete. The last 4 or so photoshop images I added seemed to tip the program over the edge. It had been slowing down some, but those last few really dropped the processing speed. Before those additions, export took 30 min to 1hr.
I did delete the render files (did not check if the file size was bloated beforehand, oops) but it has not significantly affected my performance.

Do you need all of those extra pixels in the stills? Are you panning the full 4976?
Two things to consider are that if you using, say a 1920 x 1080 Sequence Frame Size, you can only see that at any time, regardless of how large the images are in pixels. If there are extra pixels, i.e. the Pan is not using all 4976 pxls., I would Scale to just what you need in PS, prior to Import.
If you are doing any Scale in PrPro, its Scaling algorithms are not as efficient, as those in PS. [Note: CS5 and 5.5 are a major improvement on that statement.]
With many large stills (the max for CS4 is 4096 x 4096, if there ARE extra pixels, pushing those around will use up resources, and quickly. As a test, some years back, I was working on a "photo wall," and was using 4000 x 4000 images. The workstation had no issues with slowness, until I got to the 5th large still. By the 8th, the Project was too slow to edit. I had to wait for everything. Luckily, I have AE, and it handles large stills much more efficiently, and much differently, than PrPro. I just moved to an AE Comp, and completed the Project, finishing up n PrPro, after I Exported from AE.
Just something to think about. With Scaling in PrPro, this is one time, where bigger is not necessarily better.
Good luck,
Hunt

ITunes store not loading with iOS 7 on iPhone 4S

iTunes store not loading with iOS 7 on iPhone 4S.
I have tried reset network connections
I have restored
I have backuped
I have erased all content
I have rebooted
I have DFUed.
I have also the same issue with iTunes on pc, with -50 error.
Is this an apple server error?!

Thom_d, you mean your 4s work smoothly? my 4s also 32gb look to be more laggy especially playing asphalt8, infinity blade2, etc... the graphic will stop for few second while you racing.. Are you sure you didn't encounter this kind of problem? About battery life, it only last for 5hours without 3g services(only using wifi). Pretty shock saw what you mention above.

Cant down load new iOS 5.1 says can't connect to network

Cant down load new iOS 5.1 says can't connect to network

Check out this link to see if it helps - http://www.apple.com/support/ipad/assistant/wifi/

Typing on the iPad 2 very slow to respond with iOS 7

Why is typing on the iPad 2 very slow to respond with iOS 7?

Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.

TS1398 Ipad Minin -Cellular 64GB Slow down load speed ???

Hello From Australia
Question I recently boiught a new Ipad Minin -Cellular 64GB and am very disapointed
Reason is Very Very Slow down load speed ??? My Ipad Minin -Cellular 64GB when connected to our home Telstra high-speed Wi-Fi Internet has a maximum download speed of say 2Mbps while my laptop pro (side by side comparison) is downloading at 8Mbps ?? I am using a Telstra Technicolour :
Wireless Access Point - Telstra
Configuration
Interface Enabled:
Physical Address:
a4:b1:e9:79:99:b5
Network Name (SSID):
Actual Speed [Mbps]:
65
Band:
2.4GHz
Region:
Australia
Channel Selection:
                                     Automatic                                     Manual
Channel:
                                     1                                     2                                     3                                     4                                     5                                     6                                     7                                     8                                     9                                     10                                     11                                     12                                     13
Channel Width:
                                     20MHz                                     20/40MHz
Allow multicast from Broadband Network:
Security
WPS Enabled:
Broadcast Network Name:
Allow New Devices:
                                     New stations are not allowed                                     New stations are allowed (via registration)                                     New stations are allowed (automatically)
Encryption:
Disabled
Use WEP Encryption
Use WPA-PSK Encryption
WPA-PSK Encryption Key:
WPA-PSK Version:
                                     WPA                                     WPA2                                     WPA+WPA2

This is the iPod touch forum. I requested your post be moved to the iPad forum.

Ipad 1 slows down after installing IOS 5

Adter installing IOS 5 my Ipad 1 slows down considerably. Apps take time to start and especially the writing is so slow that I actually I cannot use the Pad anyomore. I udgraded only because I could not update imoorstant apps (keypad, pages) anymore with the old operating system. But this is no solution. Anyone elseexperiencing this problem or am I the only one?

it just doesn't work...
I used Pages and Keynote and Garageband extensively in ios4, with few problems. now, in ios5 they take quite literally several minutes to load, if they don't crash (usually a 50% chance).
I have been to my local Genius Bar and they suggested "restoring as new", as opposed to "restoring with backup". i took this advice, and did both (post ios5 upgrade) and performance is still just awful.
really loved this device up until now, and could even reliably use it for work. at the moment i have an expensive paperweight and am not at all pleased.
seems i have company here. are you listening apple?

WLC-4402 : Users complaint slow down load

Hello
My users complaint the down load speed is slow when using wireless. I checked and indeed is slow.
Before this happen, my WLC is running 802.11b/g. So my thought maybe the 802.11b can slow down
on the users so I changed WLAN to run on 802.11g only. Well, it is still slow. If anyone has any idea
on this is appreciated.
The WLC-4402 is running on version 4.1.185 and all 19 LAPs is 1242AG with IOS version 12.4(3g)JA2

OUCH...
"Channel Utilization is depending on what channel and is changing from time to time.
Channel 1 is between 17 and 62, Channel 6 is between 9 and 33, and Channel 11 is between 28 and 45"
Do your APs have 802.11a radios? If so, move your asscoation to the 802.11a side and run your test... Your channel utlization is high, very high. I assume you have 1 PHY rate set to mandatory and lower data rates are enabled 1,2,5.5 ?
Lets clean up the utilization first and see the results before you go further...
Test the 802.11a side ...

Slowing down samples with pitch change

I'm looking for the easiest way to slow down a sample within Logic and have the pitch change as well.
For example, my sample is two bars of jazz piano at 140 bpm, I'd really like to take it down to
115-118 bpm and have the tempo change affect the pitch so it's lower and more suited to hip hop.
I use ReCycle, and so far I've tried two ways. I've tried loading the REX file directly from the browser and slowing down the master tempo, but it just stretched my sample out and kept the pitch the same.
I also tried loading the samples to the ESX24 and then adjusting the tempo, with the same effect....
Any suggestions anyone has would be greatly appreciated.

Hi Sed,
Use this one, in the *sample editor window*, with the correct sample/audio file in it of course:
Then pick *'classic mode' OR free mode* (both do exactly what you describe) and 'complex' algorithm. You can pick any setting in the Tempo or Pitch fields - they are linked. Click '*process an paste*' and you're done.
Regards, Erik
Message was edited by: Eriksimon
Message was edited by: Eriksimon

Web pages slow to load with IE11 and the cursor/mouse is very slow to work until after page loads

Web pages are very slow to load, I hve run Norton Eraser and found no issues that would cause this

New HP Pavilion three weeks ago. After several attempts by the 'experts' I finally got a straight answer from a tech in the Philipines yesterday, 01-29-2015. HP and Microsoft are working to resolve the issue of slow pages and a dead cursor until the next page finally loads. You may have discovered that Google Chrome DOES NOT have this issue. Comments about HP would not be allowed here so I will just say, use Chrome until the issue with IE 11 is resolved.

Projector very slow to load with text members - d11.5 & Mac

Hi,
Im currently trying to port some old projects to 11.5 and am having issue with the projector load time and text members on mac.
When a projector contains any #text members it takes a very long time to load and appears to be frozen for some time (with spinning beachball cursor for at least 30 seconds).
If there are no text members it loads instantly.
Things i have tried:
* Embeding xtras
* Excluding xtras and having in external folder.
* Using stub movie with no text members that loads offending movie. (does slow load when it navigates to movie)
* Built clean test movie from 11.5
Environment: OSX 10.6.7 and director 11.5
Any help appreciated?
Regards,
Mia

hi.
still cant get this resolved:
OSX 10.6.8, _player.productVersion 11.5.9
Can anyone test this for me ??
Build a mac projector with a text member. Does it take 12 secs extra to load (with spinning beach ball)
Perhaps some one with lion ?
Not sure if its just me or a known issue.
please & thanks.

Slow down audio with quick keys

can you slow audio just a bit with a quick key to check an editing point before cutting?

Logic 9 has speed fades that achieve this very easily. Plugins like Amazing slow downer could do this.
Have you tried turning the clip into an Apple Loop which follows tempo. Then slowing down the tempo of the project?
JG

Slow down loading

new apple tv is so slow to watch a preview or down load a movie I checked my speed on speed test . net and my cable speed was over 15

http://support.apple.com/kb/TS3623 (scroll to the bottom)
As I said also rule out interference, also there could be ISP throttling either specific to the device, or at certain times etc.

Notice iPad1 Slower than ever with iOS 5?

Boy, am I ever glad I updated my iPad to IOS 5. Not only did Apple lose my back during the update (causing me to resore the whole "system"), but now it runs even slower than the last iOS 4 update.
Hasn't anyone else noticed this?
When I updated to iOS 5, I said to myself, "If iOS 5 runs even slower or causes any other problems, I'm going to throw this thing out the window. Well, not going to do this, but I'm REALLY going to recommend AGAINST the iPAD to anyone interested
Can't touch this

LaraCroft_NYC wrote:
Nothing is wrong. System was restored from scratch for the update. It's an iPad 1 and Apple designs new operating systems for newer, faster hardware. Older hardware ALWAYS runs slower with newer operating systems, including, and especially MACS. This is 44 years of system internals design experience with MS in Comp Sci+BS Comp Engineering talking, 25 years of Mac experience since 1986, and iOS experience since it first came out.
What is your "experience"? Oh, yes...You mentioned it: Like "most" iOS users.
Strangely, i have worked in Software Engineering and Operating Systems development since 1964. That gives me, oh, 48 years or so of relevant experience. I also have an MS in Computer Science.
When I tell you that i am using my iPad 1 with iOS 5 and am NOT experiencing a slowdown do you not believe me? Is it necessary to become insulting and condescending? Is it necessary to close your mind to other data input?
I do believe you when you say that you are having problems. Since these problems are not present for every iPad 1 user there has to be something unique about your iPad 1 or the environment/settings that it is functioning in.
To find out what is the problem I suggest, as I said before, that you contact Apple, demonstrate your problem and get assistance.
To reach the conclusion, on the basis of one example, that Apple has crippled the iPad 1 with iOS 5 is illogical.

Slow down loads with ios 5.1

Similar Messages

Maybe you are looking for