Slow down the Creative Entertainment Center Fast Foreward when using the X-FI Remo

Hello,
When watching videos on my computer using the?Creative Entertainment?Center app and the remote with my X-FI SoundBlaster card the fast forward goes from zero to ludicrous speed instantly. I usually end up fast forwarding half way through the file without intending to. Is there a setting or registry or any other adjustment I can use to slow this down to a sane level? A 30 second skip for instance would be wonderful!
Thanks!

Creative doesnt seem to hav plans to release Entertainment center for Audigy 2 ZS. But theres a way to install and use Entertainment center with AUDIGY 2 ZS Platinum/Pro. I first installed the Audigy 4 Modded PAX drivers for Audigy2 ZS with all softwares(i downloaded Audigy 4 ISO) , Then i uninstalled the drivers and reinstalled Audigy 2 ZS drivers , and again installed Entertainment Center, Guess what now Audigy 4 doesnt prompt me that i dont have the required HARD WARE before installation starts, and i can install ny Audigy 4 software(nothing much new though , only Entertainment center and Smart Recorder). and i am now enjoying Entertainment CENTER with my Audigy 2 ZS Platinum Pro and with Audigy 2 drivers!!!!.
I think its not proper on part of CREATIVE not to release Ent. Center for Audigy 2, as the IO box and remote control of Audigy 2 and Audigy 4 are the same( RM-500 remote). so wats the point in keeping Ent. Center just for Audigy 4 and Up?
BELOW IS MY ANALYSIS OF ENTERTAINMENT CENTER, just giving the pros and cons so that Audigy 2 Platinum/Pro Users can decide whether its GOOD or NOT
On the PLUS SIDE
+ it has nice interface
+ Good handling of playlists
+DVD Playback
+Slideshow and presentation support
On the NEAGATIVE SIDE
- Every time u want to perform PAUSE, NEXT TRACK, PREVIOUS TRACK operations the Ent. Center pops up as a FULL screen app. interupting u r current TASK
- Also it is not integrated with MEDIA SOURCE Player,(i.e when u start playing song with ent. center it doesnt get layed with MEDIASOURCE so not DTS Neo:6 Playback!!!)
-Even the Press of CMSS button takes u to the full screen app. again causing INTERRUPTION!!!!!
- Doesn't Have a SEARCH option to search for tracks from thee Library
- No BASS/TREBLE/BALANCE Control thru. it
Message Edited by nvpower on 09-30-2005 06:39 PM

Similar Messages

What is the best way to avoid latency when using the io plug in?

What is the best way to avoid latency when using the io plug in?

Hi colin a.
Welcome to the Support Communities!
The article below may be able to help you with this. Click on the link to see more details and screenshots.
Logic: About I/O buffer size and monitoring latency
http://support.apple.com/kb/ht1314
Cheers,
- Judy

The new version of fire fox keeps crashing my entire computer if i pull down the scroll bar to fast and when using sites that use flash player my other browsers work fine its only started happening since it updated to 3.6.10

Firefox keeps crashing my entire computer if i pull down the scroll bar too fast or go to websites that use flashplayer and sometimes for no reason at all. My other browsers work fine and firefox did till the update.

There has been a security update of the Flash Player and the current version is 10.1 r85 , so you are two versions behind (previous was 10.1 r82).
See http://www.adobe.com/software/flash/about/

Does the quadrangle's amount be limited when using the IndexedQuadArray?

Dear all,
I use IndexedQuadArray to describe a 3d's surface which is composed of thousands of quadrangle. When the quadrangle's amount is larger than 60000,the JVM is crashed with the following information:
+++++++++++++++++++++++
An unexpected error has been detected by Java Runtime Environment:
SIGSEGV(0xb) at pc=0x000000000dbefebb, ...
Java VM: Java HotSpot(TM) 64-Bit SErver VM(11.3-b02 mixed mode linux-amd64)
Problematic frame:
C [i965_dri.so + 0x31ebb]
The crash happened outside the Java Virtual Machine in native code.
See Problem ...
++++++++++++++++++++++++++++++++++
But when the amount is not larger then 60000, everything is ok.
My os is: 2.6.26.8-57.fc8, Redhat fedora 8, x86_64
J2SE : 1.6.0_13-b03
Java3D: 1.5.2
thanks

That's a computer problem. Your computer can't handle an amount larger than 60000. I had a similar problem.

What should the Master Clock be set to when using the Rode NT-USB Microphone? (Audition)

Re: Adobe Audition
Just received a Rode NT-USB and curious as to what Master Clock is and what it should be set to in Audtion CC for the NT-USB mic under Preferences > Audio Hardware.
*I do not see an Audition Support Forum, reason for posting in PP CC.

It's listed in the "Communities" box to the right side of the PrPro "Overview" tab page ...
Audition CS5.5, CS6 & CC
Neil

Creative Entertainment Center Driv

Hey there,
? I've been looking for the Creative Entertainment Center for XP. Under downloads I can find "[url="http://us.creative.com/support/downloads/download2.asp?MainCategory=&Product=&dlcentric=034 2&filetype=&filename=ECUP_PCVTAPP_LB_3_40_2.exe">C reative Entertainment Center 3.40.2[/url]" which is Vista only. I've downloaded this and I've tried to install it anyways and it tells me to get Vista or higher. I'm not about to buy Vista, so can anyone please help me find an older version of the Entertainment Center? Thanks for any help! I've lost my install CD and I reformatted my computer, now my remote won't work. Again, thanks to anyone that can help me!!
-Denis L

http://drivers.softpedia.com/progDownload/Creative-Entertainment-Center-Download-63385.html
Found this.
Doesn't seem to be available on Creative's website.
EDIT:?Seems that's the same thing which is available on the Creative site. Nope, no XP updates and no stand alone installation. If you attempt to install it directly off the CD, you get a Installshield Error. Also, if you attempt to do a custom setup with just installing the Entertainment Center from the CD, you get to 4% and it freezes. This company really sucks at customer service. They do not respond. So many people have begged for updates to this software for XP and their Drivers for Vista are worthless. So basically, you're stuck with a $300 sound card that is better used as a paper weight. This is a thread I made late last year begging for an update.
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&thread.id=0038
Here's a thread which has lasted 3 years with others asking for enhancements. "We're passing info along".
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&thread.id=30527
Yet... and even older request.
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=624#M624C reative, please get your stuff together. AT LEAST ACKNOWLEDGE THIS!
Message Edited by ProperMethodz on 08-3-2008 0:07 AM

Creative Entertainment Center

Since Creative has yet to release Win7 updated Creative Entertainment Center software for X-Fi cards, can one install the Creative Entertainment Center 5.0.2 released for X-Fi Surround 5. and get it to work properly instead?
Thanks!

I would like to see official update from Creative for X-Fi Elite Pro - Creative Entertainment Center for Windows 7
But for now we can use only patched Creative Entertainment Center..
Here is the links (mirrors):
<a rel="nofollow" target="_blank" href="http://rapidshare.lv/wos/8229/Creative_Entertainment_Center_for_Win7_v5_0_6_patc hed_X-Fi_Elite_Pro.rar.html"]http://rapidshare.lv/wos/8229/Creative_Entertainment_Center_for_Win7_v5_0_6_patc hed_X-Fi_Elite_Pro.rar.html[/url]
http://rapidshare.de/files/495942/Cr...e_Pro.rar.html
http://rapidshare.com/files/35544690...e_Pro.rar.html
http://www.filefront.com/5603309/Cre..._Elite_Pro.rar
http://filebeam.com/3634fbcad9a09d5bf9a22597f9f6d5a

Creative Entertainment Center not installing (Audigy

hey
i have a creative audigy 4, everything installs but the creativ entertainment center. the setup always stalled at the point when inst alling it so i removed everythign and installed everything but the entertainment system and it works fine. i tried to isntall the entertainment system afterwards but when selecting add in the setup its not in the list but under repair itslisted ever though it hasnt been installed. anyone know how i can isntall it's i tried runing the setup straigh from the cd but that doesnt work(used to work for my SBLi've in WinME(said coul onyl isntlal from 98se or higher)),
is there a independent setup program for it's? anyone have an idea how i might be able to install it's
thanks

I'm getting the same problem with my SATA hard disk, although it worked on my old SCSI's
Athlon64 3000
gb ram (pc400)
Geforce 6200
Soundblaster X-Fi
ABit UL8 motherboard (ULi 689 chipset - latest bios)
Maxtor 6V60E0 SATA hard disk
fujitsu 0gb udma66 hard disk
old scsi dri'ves were Seagate barracudas on an old initio scsi card
windows can read the hard disk - 60gb formatted as 25gb NTFS (mounted as D
C: is NTFS as well

Significant delay when using the "tap to click" trackpad function

(I accidently post this in the wrong forum -- for the old MBP -- so this is a repost)
Hello everyone! I bought a 2.4 Ghz unibody MBP like 3 weeks ago. I had an issue and they replaced the computer with a new one at the store. Today is the first day of using the new laptop. They switched out the ram upgrade and the hard drive.
The issue seems to be that when using the tap to click function on the trackpad, there is a relatively significant delay (at least for a click). With the regular mouse button the delay isn't there. Such as if I'm clicking on the finder or the file tab, there's a bit of a delay before they pop up, compared to instantaniously with the mouse button. When using the trackpad for regular types of tasks, there is a bit of a delay sometimes too. Such as I'll be moving the mouse across the screen and it will stop.
Please help me out. If I could solve it without going back to the Apple store that would be great. Thanks everyone in advance.

Update: I think the 1/2 second delay is too long of an estimate, but the delay is significant enough to make me notice something has to be wrong. My previous MBP had no delay.
When moving the mouse around, I'm not sure if it's a MBP issue, but occasionally the mouse seems to "get stuck" on the screen and I have to begin moving my finger again on the trackpad. This happened on the first MBP too.

When is Creative Entertainment Center coming to the Audigy 2 ZS Platinum P

<SPAN>Hi all
<SPAN>Does anybody know if/when Creative Entertainment Center is coming to the Audigy 2 ZS platinum PRO. I have seen it running on the Audigy 4 PRO/ X-Fi on review sites and it appears to be a lot better than our Remote Centre had has a lot more functionality as well as charisma (the graphics look good to).
<SPAN>Are us Audigy 2 ZS Platinum PRO users going to receive this wonderful package, or is it going to be just for those who are privileged to own the X-Fi or the Audigy 4 PRO.
<SPAN>Thanks for any information/updates

Creative doesnt seem to hav plans to release Entertainment center for Audigy 2 ZS. But theres a way to install and use Entertainment center with AUDIGY 2 ZS Platinum/Pro. I first installed the Audigy 4 Modded PAX drivers for Audigy2 ZS with all softwares(i downloaded Audigy 4 ISO) , Then i uninstalled the drivers and reinstalled Audigy 2 ZS drivers , and again installed Entertainment Center, Guess what now Audigy 4 doesnt prompt me that i dont have the required HARD WARE before installation starts, and i can install ny Audigy 4 software(nothing much new though , only Entertainment center and Smart Recorder). and i am now enjoying Entertainment CENTER with my Audigy 2 ZS Platinum Pro and with Audigy 2 drivers!!!!.
I think its not proper on part of CREATIVE not to release Ent. Center for Audigy 2, as the IO box and remote control of Audigy 2 and Audigy 4 are the same( RM-500 remote). so wats the point in keeping Ent. Center just for Audigy 4 and Up?
BELOW IS MY ANALYSIS OF ENTERTAINMENT CENTER, just giving the pros and cons so that Audigy 2 Platinum/Pro Users can decide whether its GOOD or NOT
On the PLUS SIDE
+ it has nice interface
+ Good handling of playlists
+DVD Playback
+Slideshow and presentation support
On the NEAGATIVE SIDE
- Every time u want to perform PAUSE, NEXT TRACK, PREVIOUS TRACK operations the Ent. Center pops up as a FULL screen app. interupting u r current TASK
- Also it is not integrated with MEDIA SOURCE Player,(i.e when u start playing song with ent. center it doesnt get layed with MEDIASOURCE so not DTS Neo:6 Playback!!!)
-Even the Press of CMSS button takes u to the full screen app. again causing INTERRUPTION!!!!!
- Doesn't Have a SEARCH option to search for tracks from thee Library
- No BASS/TREBLE/BALANCE Control thru. it
Message Edited by nvpower on 09-30-2005 06:39 PM

Recording with audio playback slowed down 65% what speed do I need to speed the video back up to to get it into real time?

Ive recorded a test video with audio/music playback slowed down 65% what speed do I need to speed the video back up to to get it into "real" time?
If I'd slowed the audio playback down 50% I would make the video 100% faster.
If I'd slowed the audio playback down 100% I would make the video 200% faster.
So its obviously somewhere inbetween speeding up by 100-200%
Sorry but its melting my brain today and I cant remember the calculation.
thanks

hey all
Thanks for the advise on this. I will explain a little more what am have/am intending to do.
I have used Audacity to slow the song down (Effect>Change Tempo)
Audacity will allow me slow the original song down by up to 99% (Or anything in-between up to 3 decimal places)
Unfortunately I am working to a time restraint of 12 minutes per clip (as my DSLR will only allow up to a 12 minute clip).
The song at normal speed is 4 minutes long.
Originally I slowed the audio down by 50% (Making the audio 8 minutes long), lip synced to it using a rasta blaster and recorded the video using my DSLR at 720p 50fps.
I then imported the video and audio I had been lip syncing to into FCPX.
I sped up the video by x2 (equivalent to speeding it up 200%)
Retime>Fast 2X
Layered the PROPER normal speed audio back over the top and all was fine.
Test video complete.
(You can ignore the 65% slowed down audio I mentioned earlier if you like, that was just an example of a slower than 50% audio test)
Firstly what I really want to do is to be able to slow the AUDIO down as much as possible (But still within the restraints of only being able to adjust FCPX retiming within a whole 1 percentage in the final video edit), but have the AUDIO of the song as near to/under 12 minutes as possible.
I will then re-record the video again to this new slowed down audio.
Secondly I will speed up the video from 12 minutes to 4 minutes.
Thirdly I will layer the correct 100% Normal AUDIO on top.
The FINISHED video should then look like everyone is wizzing around at high speed but the guitar playing/lyrics look like they are being played/sung at the normal speed.
Whatever happens (due to the constraints of FCPX) I need the calculations to work so that FCPX is retimed exactly to a whole 1% for the final video to sync up correctly.
So what I need to know in a nut shell is:-
What calculation do I use to work out the percentage to slow a 4 minute song down to a 12 minute song?
What calculation do I use to work out the percentage of how much I need to then speed the 12 minute video up to turn it back into a 4 minute video?
My mind is melting

Can you tell me how I can ask for help with the following Indesign question: I am a new Indesign user and a Creative Cloud member. I was using the Window/Pages drop down window to view my pages alphabetically or by page number and also to determine whet

I am a new Indesign user and a Creative Cloud member. I was using the Window/Pages drop down window to view my pages alphabetically or by page number and also to determine whether or not my JPEG files were sufficiently HI-Res for the printer. I don't know how I did it but somehow the window has changed so that now it does not have the alphabetical/numerical/Hi-Res information. It just shows the pages in a two page spread in numerical order. How can I restore the window so that I will be able to view the information as I did previously.
Your help will be appreciated,
Don Unwin
[Personal Information Removed]

The pages panel is not the place where you see this information. You can customize the Links panel to show all sorts of things, including the page number, effective and actual ppi, and whether the link is OK or needs updating.

My macbook pro is running very slow with some strange mouse and window movements. The trackpad is very unresponsive and when responding the cursor moves on its own and/or very erratically. When on safari the window suddenly zooms in or highlights words.

My macbook pro is running very slow with some strange mouse and window movements. The trackpad is very unresponsive and when responding the cursor moves on its own and/or very erratically. When on safari the window suddenly zooms in or highlights words and looks them up via dictionary. I currently have a wireless mouse connected and I am still having the same problems.
I fee like I may have a virus or my laptop is perhaps being accessed remotely. All of the sharing options are unchecked.
HELP PLEASE
Very worried!!

Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
     Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
     COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
     after the chime press and hold down the OPTION key until the boot manager screen appears.
     Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
     Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems n

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]

I am trying to get space on an external hard drive which has some old time machine back up files that I do not need but can not eliminate, even by going into the time machine, clicking on the backup file to be eliminated and using the drop down eliminate

I am trying to get space on an external hard drive which has some old time machine back up files that I do not need but can not eliminate, even by going into the time machine, clicking on the backup file to be eliminated and using the drop down menu with the gear box symbol to eliminate

I cannot find this 300GB "Backup" in the Finder, only in the Storage info when I check "About This Mac".
You are probably using Time Machine to backup your MacBook Pro, right? Then the additional 300 GB could be local Time Machine snapshots. Time Machine will write the hourly backups to the free space on your hard disk, if the backup drive is temporarily not connected. You do not see these local backups in the Finder, and MacOS will delete them, when you make a regular backup to Time Machine, or when you need the space for other data.
See Pondini's page for more explanation: What are Local Snapshots? http://pondini.org/TM/FAQ.html
I have restarted my computer, but the information remains the same. How do I reclaim the use of the 300GB? Why is it showing up as "Backups" when it used to indicate "Photos"? Are my photos safe on the external drive?
You have tested the library on the external drive, and so your photos are save there.
The local TimeMachine snapshot probably now contains a backup of the moved library. Try, if connecting your Time Machine drive will reduce the size of your local Time Machine snapshots.

Slow down the Creative Entertainment Center Fast Foreward when using the X-FI Remo

Similar Messages

Maybe you are looking for