Slow down when using SHARE function?

Whenever I use the share feature to wirelessly transfer files from my Mac Air to my Macpro everything on my macpro slows down. the mouse moves slow- windows take forever to respond- or just will not close at all. I tried switching my wireless mouse to a wire and same issue. Shouldn't the transfer be a background task? Why is it effecting the overall performance of the machine?

Your explanation makes sense; I had not considered the output size because I thought that the application would make all the necessary adjustments to the size I chose.
I was not able to find the square pixel reference (below is the advanced area) but I did resolve the issue. At first I changed the output to be 400 x 300, and while the bars still existed, they were greatly reduced. So I took a screen capture and in Photoshop measured the height of the remaining top bar at 3 pixels. So, I reduced my height in PrE7 by a total of 6 pixels to 294 and that completely corrected the issue. Thanks for your help on this.

Similar Messages

Does new Airport Extreme slow down when used with Airport Express?

Maybe this is self-evident.
If get the new Airport extreme and use an old airport express to extend it, will signal slow down to the old speed?
Does the AE have a greater range? Perhaps I don't need the Express to extend.
I live in NYC and there are so many signals in the air. It seems like having the additional airport helps keep me connected.
Thanks.

The airport express is g technology not n technology, so it will be at least as slow as your old network. Also, I'm not sure but I think the the range will be a bit longer than with the old g system, but does not have the full potential of an n system.
I've set up my new system but none of my machines are n capable. I extended the system using my old expresses. The speed of the system is no greater than what it was before the n.
I bought the system to upgrade my technology because everytime my Applecare runs out, I get a new computer which isn't too far down the road. I've purchased an Apple TV which will also work better with the n technology when I upgrade. It's either buy it now or buy it later. I'm also hoping that some third party like Belkin will develop a PCIX card to provide n technology to those of my computers that aren't currently n capable. I'm sure there is many like me out there.

Extreme slow down when using wireless connection

I did not have a wireless network prior to purchasing the airport express and needed this as I purchased a macbook. My intention was only to use this device as a wireless network. I have my cable modem connected to a linksys router which is connected to the airport express. The internet connection on my macbook is extremely SLOW! I have reset and reinstalled my airport several times, called apple support and trouble shoot for over an hour, however still experiencing the same problems...slow internet connection. In my troubleshooting I have determined that cable modem and connection, router and airport are all working properly. So the only other thing is interference issue. I've tried changing the channels, use interference robustness option however still no results. I just want my laptop internet connection to work fast. This is my last hope otherwise I'm going out tomorrow to buy a wireless Linsys N router. Any suggestions????

Well it turned out to be a DNS configuration problem on the MacBook. If you go to Networks-Advanced in the System Preferences for the Airport connection, then select the DNS TAB. In there I had a spurious DNS entry. I deleted the one that was manually entered in (it's in black text) that way the one I received from the Airport Express was the only one in there (it is greyed out and you can't delete it.)
Hope that helps.

I get an error message when I try to use share function on IPhoto. I get the triangle icon with an exclamation mark inside of it.

I get an error message when I try to use the share function on iPhoto. When I try to share photos via email a triangle icon with an exclamation mark appears. Why can't I use share function?

The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
What version of iPhoto? Assuming 09 or later
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Songs slowing down when I type

I'm running iTunes 7.7.1 on a new computer. iTunes had no problem on my old one, but on my new one, the songs slow down when I type, which is rather annoying, since I listen to music while, you know, typing. I'm on WinXP Pro, and everthing else is working great. Any ideas?

What tools, Mostly I work with iWeb using iPhoto, Aperture, Photoshop TeXture Adobe FormsCentral for Acrobat etc. making and editing Web Sites. Often I have many Apps open simultanously.

Excel slows down when network drive is mapped

Since a couple of months we are experiencing strange behaviour of excel (2011) on Lion 10.7.5
Excel versions from 14.3.1. to 14.3.4 all the same behaviour.
Symptom 1)
When I connect the Time Capsule drive , Excel slows down by factor 100 when entering text. Needs up to 2 seconds to react on a key stroke.
When I disconnect the handle, excel works fast again.
(repeatable, reproducible)
Symptom 2)
on the network drive, always at the same place, a file named ~abcde.xls... occurs (exact name forgotten, but it is a recent file name
preceded with a tilde sign)
deleting of the file does not affect speed
the file reappears occasionally (TC backup is switched off!)
Where is the ghost??? :-D
maybe these symptoms are uncorrelated.
Why the heck does Excel slow down when I open the network drive??
Why does this happen on 10.7.5 and not on 10.6.8?
Anyone any idea?
thanks,
Stefan

Thanks. Away on holiday right now, but will do it as soon as I get back next week.
Out of curiosity, the external drive works fine when connected directly via USB to the laptop. I took that to mean that the problem wasn't to do with the drive, but probably the network. Is it possible there could be a problem with the drive which only shows up when it's used as a network drive?

Slow down when processing image clipping in photo shop with pen tool

Adobe cs5 slow down when processing image clipping use with pen tool. The path is applying after few seconds when we draw on the image. My system supporting 4 GB memory with 64 bit.

The main thing i use paths for in photoshop is extracting objects from photos.
Other uses include stroking paths with the paint tools. For example, if you had
a powerline to remove, one could trace the line with the pen tool and then stroke
the path with spot healing brush set to content aware fill.
more info on photoshop paths:
http://help.adobe.com/en_US/photoshop/cs/using/WSfd1234e1c4b69f30ea53e41001031ab64-73ada.h tml
MTSTUNER

Internet speed slows down when connected via airport express

Internet speed slows down when connecting via airport express. When connecting directly via the timecapsulethe internet speed is ok, when connecting via the airport express the speed slows down.What can I do to change that? Any suggestions?

Turn off the AirPort Express completely as a test, and move your computer very close to the location of the Express.
As I said before, the Express can only extend the bandwidth (speed) that it receives from the Time Capsule, so the speed that you see there with the Express powered off will be the fastest speed of which the Express is capable.
The Express will make the signal go further when it extends....but it will not make the signal go faster.
A good location for a device that extends wirelessly is a point that is about half the distance from the Time Capsule and the general area that needs more wireless coverage.
If you locate the AirPort Express too far from the Time Capsule or there are more than a couple of walls in the signal path, the signal will be very slow by the time that it reaches the Express....and the Express simply extends a signal that has already slowed down significantly.
If you already have the Express located about half the distance between the Time Capsule and general area that needs more wireless coverage, how many walls, ceilings or other obstructions are there in the signal path between the Time Capsule, the AirPort Express and the area that needs more coverage?
Often, due to obstructions, it is just not possible to achieve good performance when you try to extend a network wirelessly. The solution is connect the AirPort Express to the Time Capsule using a wired Ethernet connection.
There is virtually no signal loss with this type of connection, so the Express can be located exactly where it is needed and it will produce a much faster wireless signal in this type of setup.

Exchange 2013 CU5 , Exchange Power Shell very very very slow reasponse when using get command.

Exchange 2013 CU5 , Exchange Power Shell very very very slow reasponse when using get command.
First my organize has Exchange on 2 site like
site A (internet facing) : 2CAS 2 MB all are Services pack1
site B (DR Site , no user active on this site) : 2CAS 2MB all are Services pack 1
so today I upgrade Exchange 2013 from SP1 to CU5 start on "site B" and I found this issue and the details is....
When I open EMS on any CU5 for query something (like get-mailboxdatabasecopystatus) the response return very slow and some query will not return at all (like get-owavirtualdirectory).
But If I using EMS on SP1. Everything is ok then I try to use EMS on SP1 connect to CU5 and try to query something. the result is
some query command cannot return for any result that are server on siteB (just some query command)
Problem
EMS on CU5 return very slow result.
EMS on SP1 still ok.
Does anyone face this problem before for CU5??? Please help me figure this out. Thank you
reply from Social.technet

Hi,
Have you used the above cmdlets to check your Exchange server health?
"all other command that I ran on EMS didn't logged on event viewer.", my environment is the same with you. I use Exchange 2013, only errors will be displayed in MSExchange Management. Actually, it is not related to slow EMS response.
Hope it helps.
Best regards,
Amy Wang
TechNet Community Support

When using TODATE function MDX query is not correctly generated

Essbase 9.3.1.2 and OBIEE 10.1.3.4.1.
When using TODATE function MDX query is not correctly generated.
This leads to unexpected values not only on cumulative columns in report (generated with TODATE), but also other columns (calculated with AGO function or directly read from cube) have incorrect values.
The problem occurs when you filter on a column that is not in the select list. If you filter on just one level of dimension, results are fine. You can filter on multiple dimensions as long as you filter on just one level of each dimension.
If you filter on two or more levels of one dimension, than results are not correct. In some cases results for TODATE column are all zeros, in some cases it is a random value returned by Essbase (same random value for all rows of that column), and in some cases BI Server returns an error:
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. Essbase Error: Network error [10054]: Cannot Send Data (HY000).
Here is generated MDX code:
With
set [Grupe proizvoda2] as '{[Grupe proizvoda].[N4]}'
set [Grupe proizvoda4] as 'Generate([Grupe proizvoda2], Descendants([Grupe proizvoda].currentmember, [Grupe proizvoda].Generations(4), leaves))'
set [Segmentacija2] as '{[Segmentacija].[RETAIL]}'
set [Segmentacija4] as 'Filter(Generate({[Segmentacija2]}, Descendants([Segmentacija].currentmember, [Segmentacija].Generations(4),SELF), ALL), ([Segmentacija].CurrentMember IS [Segmentacija].[AFFLUENT]))'
set [Vrijeme3] as '{[Vrijeme].[MJESEC_4_2009]}'
member [Segmentacija].[SegmentacijaCustomGroup]as 'Sum([Segmentacija4])', SOLVE_ORDER = AGGREGATION_SOLVEORDER
member [Accounts].[MS1] as '(ParallelPeriod([Vrijeme].[Gen3,Vrijeme],2,[Vrijeme].currentmember), [Accounts].[Trosak kapitala])'
member [Accounts].[MS2] as '(ParallelPeriod([Vrijeme].[Gen3,Vrijeme],1,[Vrijeme].currentmember), [Accounts].[Trosak kapitala])'
member [Accounts].[MS3] as 'AGGREGATE({PeriodsToDate([Vrijeme].[Gen2,Vrijeme],[Vrijeme].currentmember)}, [Accounts].[Trosak kapitala])'
select
{ [Accounts].[Trosak kapitala],
[Accounts].[MS1],
[Accounts].[MS2],
[Accounts].[MS3]
} on columns,
NON EMPTY {crossjoin ({[Grupe proizvoda4]},{[Vrijeme3]})} properties ANCESTOR_NAMES, GEN_NUMBER on rows
from [NISE.NISE]
where ([Segmentacija].[SegmentacijaCustomGroup])
If you remove part with TODATE function, the results are fine. If you leave TODATE function, OBIEE returns an error mentioned above. If you manually modify variable SOLVE_ORDER and set value to, for example, 100 instead of AGGREGATION_SOLVEORDER, results are OK.
In all cases when this variable was modified in generated MDX, and query manually executed on Essabse, results were OK. This variable seems to be the possible problem.

Hi,
Version is
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bi
PL/SQL Release 10.2.0.5.0 - Production
CORE 10.2.0.5.0 Production
TNS for 64-bit Windows: Version 10.2.0.5.0 - Production
NLSRTL Version 10.2.0.5.0 - Production
Sorry, in my last post i forgot to mention that i already created a function based index but still it is not using because, there is a UNIQUE constraint on that column.
Thanks

Photoshop CS6 shuts downs when using the move tool

Photoshop CS6 shuts downs when using the move tool. It seemas to run fine until i try and use the move tool. PS worked fine just a few weeks ago and now it has this issue. What can i do to resole this issue?
Thnaks,
System Specs
Windows XP Home SP3
AMD Atholon 64 X2 Dual
2GB RAM
Video Cards
Radeon 7200
NVIDIA GeForce 8400GS

Two displays are OK on one adapter, Two displays adapters are not OK. http://helpx.adobe.com/photoshop/kb/gpu-opengl-support-photoshop-cs4.html
7. If you are using more than one video adapter, remove the additional cards.
Multiple video adapters can cause problems when OpenGL and Photoshop use the GPU. It's best to connect two (or more) monitors into one video adapter. If you have to use more than one video adapter, make sure that they are the same make and model. Also make sure that they both support the same versions of OpenGL and Shader Model. Otherwise, crashes and other problems can occur in Photoshop.
Note: Using two video adapters does not enhance Photoshop's performance.

Elements 11 Organizer window is truncated at top, on iMac running 10.9.2, so I can't use Share function, etc.

Elements 11 Organizer window is truncated at top, on iMac running 10.9.2, so I can't use Share function, etc.

Thank you very much. I changed the resolution from 2048 x 1152 to 1600 x 900, and it showed the bar with the Import, Media ... Create, Share buttons, but did not show the bar at the very top with the red, yellow and green buttons for closing, hiding and maximizing the window.
Then I noticed that Apple had an update to Mavericks available. Since I installed that, I can set the resolution back to 2048 x 1152 and still see the Import, etc. bar. I can live without the Close and Maximize buttons, but it does seem like there is a bug lurking here that either Adobe or Apple needs to fix.

HELP - 88.2 k 24-bit wav file is slowing down when imported to garageband

i have an 88.2 k 24-bit wav file that is slowing down when imported to garageband. How do i get around this problem?

You need to convert it to 44.1 16 bit. You can do that with iTunes.

Safari browser seems to slow down when working with my wifi ASUS AC 68U router

safari browser seems to slow down when working with my wifi ASUS AC 68U router - any ideas on why?

Is your problem with Safari on the iPad, or some MacBook Air?
Are you sure that the ASUS firmware is tested with the device having trouble and its operating system?
Note: MacBook Airs do not run iOS. They run Mac OS X, Windows or Linux.

Software shuts down when using the lightning effects filter. Help!

Software shuts down when using the lightning effects filter. Help!

Have you done a Forum search yet?
Is your GPU driver up to date?
What are your version of Photoshop, OS and GPU anyway?

Slow down when using SHARE function?

Similar Messages

Maybe you are looking for