Slow editting channel in arrangement, but quick with mixer open
Hi,
A few weeks ago i freshly reinstalled Lion on my MacPro, because it was responding slow in Loepard even after upgrading my MacPro from 4 to 16GB and working in 64-bit mode. Unfortunately i still have the same problem. Please see also post https://discussions.apple.com/thread/4103719
USB Connected:
Axiom Pro 49
Virus TI
FireWIre Connected:
Apogee Duet Firewire,
Specs:
Mac Pro
Mac OS X (10.7.4)
2x 2.26 Ghz Quad Core
16GB
The problem:
Logic 9 is responding really slow. Mute, Solo, copying, dragging, loading an instrument.
It all works with seconds in between, even moving the mouse a bit after pressing solo it will press the button where you are on at the moment after. All in 64 bit Logic 9.
The strange thing is, when i open the mixer (x on my keyboard) editiing a chanell and press solo, mute or load any effect or plugins its does work like it should! Quick! Instant!
When i play a project, the CPU peaks to the max but the HD indication remains almost zero. Loading to many plugins will make Logic even slower, but i'm running 64 bit mode and with 16GB. Checking Activity monitor, and only about 4 GB is in use. See screenshots below.
I did al possible thing read on forums, reorganising memory, undo steps, disk repairs, and so on. Spent hours reading the net...
So what could it be?
THANKS!
Quintin
Who knows. Apparently faster doesn't mean faster. As can be seen in the thread below.
Why does timer code (by dbasnett) no longer work splendidly?
So an application is written in VB2010 and uses and is distributed with during install apparently an Access 2003 database which runs fast on startup on Windows 8 or maybe Windows 8.1 some style of PC yet the same app installed on Windows 7 PC's
either 32 or 64 bit doesn't run fast on startup.
Have you tried compiling the app to x86 to see if that alters its startup performance?
La vida loca
Similar Messages
-
I have photoshop cc and a mac book pro. I cannot access my photos from photoshop. I can go to iPhoto and click edit to edit them in photoshop, but photoshop won't open them. I want to do a collage, so I need to get to more than one photo.
See if exporting them helps:
Exporting From iPhoto | Apple Support Communities
Gene -
hello
I have a laptop and I installed cs4 on it (32 bit)
it is running very slow
(it is ok with one single time line, but i need to work with 3 timelines and it moves like a snail or not at all)
my computer ability is attached in a pic.
helppppppp pleaseee...
thanxHow many hard drives, and what speed?
If you only have the "usual" one hard drive, at 5400 RPM, you are not going to be happy editing video
Trying to use only ONE Hard Drive for Video Editing
You are a music conductor, with a baton that you use to point to various parts of the orchestra... this is like Windows pointing to various parts of the hard drive to do Windows housekeeping or to load program segments for various functions
Now, at the same time and with the same hand... while still using the baton to conduct the orchestra... pick up a bow and play a fiddle... this would be doing something with your video file at the same time as all the other work
You as a person cannot do both at the same time with the same hand
A computer is a LITTLE better, in that it can switch from one kind of task to another very quickly... but not quickly enough for EASY video editing
You need AT LEAST two hard drives (separate drives, never a partition http://forums.adobe.com/thread/650708 for more) with Windows (or Mac OS) and software on your boot drive, and video files on a 2nd drive so the boot drive is not slowed down by trying to do everything
I find that the three drives I use work very well for me, for editing AVCHD video... some people use a 4th drive, so video INPUT files are on drive three and all OUTPUT files are on drive four... I only bought a mid-tower case instead of a full tower case (my bad... but had to fit in the space available on my office desk!) so I use the three drives that will fit
Depending on your exact hardware (motherboard brand & model AND USB2 enclosure brand & model AND external hard drive brand & model) AND the type of video file, you may... or may NOT... be able to use an external USB2 hard drive for SD (Standard Definition) video editing
Steve Grisetti in the Premiere Elements forum http://forums.adobe.com/thread/856208 and Jim Simon in the Premiere Pro forum http://forums.adobe.com/thread/856433 use USB externals for editing
A USB3 hard drive connected to a motherboard with USB3 is supposed to be fast enough for video editing (I don't have such, so don't know) but eSata DOES have a fast enough data transfer for video editing... I have not used the eSata Dock below... for reference only, YMMV and all the usual disclaimers
http://www.amazon.com/Thermaltake-BlacX-eSATA-Docking-Station/dp/B001A4HAFS/ref=cm_cmu_pg_ t -
I upgraded my 3rd gen iTouch to iOS 5.1.1 and now its speed to repond is slower and the battery goes flat quicker than before the upgrade. Skype, Sky iCloud and other apps are turned off (I think). Has anybody else suffered with this? Any ideas?
Purplehiddledog wrote:
I do backup with iCloud. I can't wait until the new iMac is available so that I can once again have my files in more than 1 location without needing to rely solely on the cloud.
I also rely on iTunes and my MacBook and Time Machine as well as backing up to iCloud. I know many users know have gone totally PC free, but I chose to use iCloud merely as my third backup.
I assume that the restore would result in my ability to open Pages and Numbers and fix the problem with deleting apps, but this would also mean that if my Numbers documents still exist solely within the app and are just not on iCloud for some reason that they would be gone forever. Is that right?
In a word, yes. In a little more detail.... When you restore from an iCloud backup, you must erase the device and start all over again. There is no other way to access the backup in iCloud without erasing the device. Consequently, you are starting all over again. Therefore, it would also be my assumption that Pages and Numbers will work again and that the deleting apps issues would be fixed as well.
If the documents are not in the backup, and you do not have a backup elsewhere, the documents could be gone forever. -
I have a Windows 8.1 and it's even running slow. I'm a complete novice with computers (I've only had this one for 3 weeks) and I'm probably doing something wrong, but I haven't a clue what.
The tools are not responding when I try to use them. Some of them work sometimes, but not others and some don't work at all. I'm in a design class online and I need these tools desperately. I have an assignment due Monday and I'm losing the whole weekend because Tech Support is only open M-F!
Any help anyone can give me will be appreciated.
Thanks,
Rose IrelandMaybe these links provide some pertinent information.
Optimize performance | Photoshop CS4, CS5, CS6, CC
Photoshop: Basic Troubleshooting steps to fix most issues -
My MacBookPro has slowed significantly. I have cleaned it with CleanMyMac2 but it did not help. I have cleaned iPhoto and emptied the trash.
Any suggestions are appreciated.
thanks,
jim,Thanks for the help....
stevejobsfan0123 wrote:
First off, uninstall CleanMyMac, it's a scam. http://macpaw.com/support/cleanmymac/knowledgebase/how-to-uninstall-cleanmymac-2
Next, run EtreCheck, which will give us information about your system: http://etresoft.com/etrecheck.
Problem description:
MacBookPro running very slowly. Three minutes to open Safari. Four to open iPhoto.
EtreCheck version: 2.0.9 (96)
Report generated October 31, 2014 at 9:11:03 PM CDT
Hardware Information: ℹ️
MacBook Pro (13-inch, Early 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.3 GHz Intel Core i5 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: 4:25:31
Disk Information: ℹ️
Hitachi HTS545032B9A302 disk0 : (320.07 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Dummy (disk1) / [Startup]: 318.84 GB (210.08 GB free)
Encrypted AES-XTS Unlocked
Core Storage: disk0s2 319.21 GB Online
MATSHITADVD-R UJ-8A8
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Canon MP620 series
Generic Mass Storage 4.03 GB
S.M.A.R.T. Status: Verified
IPHOTO (disk2s1) /Volumes/IPHOTO : 4.03 GB (3.84 GB free)
Logitech USB Receiver
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.macpaw.CleanMyMac2.Agent.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
User Login Items: ℹ️
Canon IJ Network Scanner Selector2 Application (/Library/Printers/Canon/IJScanner/Utilities/Canon IJ Network Scanner Selector2.app)
Safari ApplicationHidden (/Applications/Safari.app)
Internet Plug-ins: ℹ️
Flip4Mac WMV Plugin: Version: 3.0.0.126 - SDK 10.8 Support
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
Default Browser: Version: 600 - SDK 10.10
AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
Silverlight: Version: 5.1.30514.0 - SDK 10.6 Support
Mathematica: Version: 9.0.1.4092152 Support
JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
Safari Extensions: ℹ️
Omnibar
3rd Party Preference Panes: ℹ️
Flash Player Support
Flip4Mac WMV Support
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
Dummy: Disk size: 318.84 GB Disk used: 108.76 GB
Destinations:
BackUp [Local]
Total size: 319.94 GB
Total number of backups: 3
Oldest backup: 2014-09-11 14:40:53 +0000
Last backup: 2014-10-15 17:08:07 +0000
Size of backup disk: Too small
Backup size 319.94 GB < (Disk used 108.76 GB X 3)
Top Processes by CPU: ℹ️
8% mds
6% WindowServer
0% AppleSpell
0% ps
0% askpermissiond
Top Processes by Memory: ℹ️
588 MB com.apple.WebKit.WebContent
133 MB Safari
69 MB Preview
56 MB CalendarAgent
56 MB WindowServer
Virtual Memory Information: ℹ️
73 MB Free RAM
1.28 GB Active RAM
1.21 GB Inactive RAM
1.03 GB Wired RAM
2.63 GB Page-ins
26 MB Page-outs -
I Have a Mac 10.9.5 I have Photoshop CS 5.. Also have Photoshop CC. As of last month was able to edit any image with either program,as of today I can't edit images in either program. I can't see and editing I've done ,but when close the image both program ask (do you want to save changes) I look at the image I don't see any changes to save. Please help Thanks for time in advance
Please describe the steps involved in the issue exactly (with screenshots maybe).
What have you done for trouble-shooting so far?
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html -
I have downloades Logic Pro 9 onto my older modfel Mac Book Pro 1,1 with OS 10.6.8 and 2 GB RAM, according to the rquirements for Logic 9. the program should run on OS 10.6.8. with 2 GB RAM, 4 GB better, but it won't open. Is my configutation too slow?
Looks as if you're just at the minimum specs - http://www.apple.com/logicpro/specs/. Says 2GB minimum, 4GB recommended. And 2GB of RAM is all the RAM the 1,1 can handle. If I were you I would call Apple's App Store service center - you have the minimum requirements, as I read it, but perhaps you need a faster processor?
I had a 1,1 but sold it when I bought my late 2011 in March of this year - maybe it's time to look at a new machine?
Clinton -
I have a problem when i open Safari.it takes a few minutes to open, the home page opens but if i try to open ( say Amazon) it just sits there for more minutes before opening ,but once it has opened i can switch from web site to web site very quick.can anyone tell me why this and is there anything i can do to
Try changing the "Top Sites shows:" to the smallest number possible. Safari is loading these sites when its starts so it can give you an image of what the site looks like when you start blank new window. A smaller number of sites will make that quicker, assuming the top sites do not have a very slow site in the mix.
-
Editing a scanned document in Adobe Pro XI but need to edit an image on the document with Photoshop. Can anyone give me step by step instructions, please? I am desperate.
chef gilly wrote:
Yes sir! If you tell me how to do that.
When replying, click the camera icon above the reply box. Then click "choose file" and choose your file. Etc. -
Printing from web pages is excruciatingly slow since downloading most recent upgrades of Firefox Mozilla. I have a desktop iMac, OS 10.6.8, and an HP officejet printer 4500 G510n. The printer works fine with the Safari Browser and with woodprocessed files, but not with Firefox and web pages. Help please! It used to print fast with earlier versions of Firefox.
Hello and welcome to the Apple Discussions Forum.
I have hardly any experience with HP printers but since your posting has not been replied to yet I thought I'd offer some assistance.
With the printer status and ink levels working, it shows that you have a connection to the printer. So I would look at the issue being with the protocol being used for the print queue on the Mac.
Since you have XP and Vista working, I would check the printer queue configuration on either box. In XP, go to the Properties and select Ports. Click the Configure Port tab to view the connection. If you are using RAW, then this is known as HP Jetdirect-Socket on OS X. So if you are not sure what protocol was used before I would create another printer queue, this time selecting IP > HP Jetdirect-Socket. Then enter your IP address and select the K5400dn from the Print Using menu.
If this still fails to print then please reply. There may be limitations with adding the HP driver this way that I am not aware of. There may also be other driver options you can look at, such as HPIJS. If Greg Sahli reads this posting he has expert knowledge on this matter and will be able to offer some guidance.
PaHu -
iPhone 5 was so intuitive before the update. Editing photos has changed for the worst-any word of a fix for editing photos for wallpaper? Not a work around, a fix. If I wanted this kind of photo editing I'd still be using my droid x.
Anyway to go back to ios6?Is Apple working on a fix for editing photos for wallpaper, call contacts with photo, etc?
How would we know?
What's broken that you think needs to be fixed?
Anyway to go back to ios6?
No -
ESR,ID working with 8000 port but not with 50000
Hi experts,
I am working with PI 7.1. I am working with SOAP to ABAP SERVER Proxy scenario. I have downloaded the WSDL from ID and using XMLSPY sent a SOAP request to PI server and I got an error in SXMB_MONI under the Call Adapter step saying CLIENT_RECEIVE_FAILED.
We cross checked the services in SMICM transaction, and we missed the HTTP port 8000 for the parameter icm/servr/port_xx.
Then basis team changed the port 8000 in SMICM for the same parameter and restarted the Java stack.we checked the icm/HTTP/j2ee parameter which is having 50000 port.
Now ESR,ID,SLD,RWB... etc are working with ABAP port 8000 but not with 50000 java port and also I am getting an error in SXI_ CACHE while doing my delta refresh if_http_client receive http_communication_failure : http_communication_failure:ICM_HTTP_CONNECTION_FAILED. Kindly suggest me to resolve this error.
NaveenHi,
Re: Architecture of PI 7.1
NW PI 7.1 - ICM is not binding to port 5$$00
from the above two threads it is very clear that from PI 7.1 both the ABAP and J2EE ports are same.
Now we maintained both the ICM and j2ee port as 50000. Now ESR,ID,SLD are working with port 50000.
But in my SOAP to Proxy scenario I am getting the same error. When I try to send request to XI server using Altova xmlspy I am getting following error in SXMB_MONI under Call Adapter
<SAP:Code area="INTERNAL">CLIENT_RECEIVE_FAILED</SAP:Code>
<SAP:P1>400</SAP:P1>
<SAP:P2>ICM_HTTP_CONNECTION_FAILED</SAP:P2>
When i click that HTML error It shows
404 Resource not found
I am getting the following error in CC monitoring .
com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.engine.interfaces.messaging.api.exception.MessagingException: XIServer:CLIENT_RECEIVE_FAILED
My reciever communication channel is in green status CC monitoring.
I tested my server proxy in my end system which is successfully fetching data.
I am using the following URL format for generating the WSDL from Integration directory.
http://host:port /XISOAPAdapter/MessageServlet?channel=p:s:c
Do we need to maintain the Fully qualified host name in the above URL?
I tried with a test scenario which is an asynchronous communication with the above mentioned URL format. I got a success message in SXMB_MONI.
Since I am using PI 7.1 I tried the following URL also but i this case,the XML spy itself throws error. I couldnt see any messages in SXMB_MONI.
http://host:port/XISOAPAdapter/MessageServlet?senderParty=&sender
Service=FS&interface=IF&receiverParty=&receiverService=TS&interfa
ceNamespace=IFNamespace
I have seen many threads in SDN for this same error but I didn't get an answer for my scenario.
Lakshman and Manjusha
Thanks for the quick responses.
Regards
Naveen
Edited by: naveen perumal on Jul 24, 2009 8:00 PM -
At 4gb of ram, literally 0 memory to spare when editing. What's going on with CC?
Specs
Model Name: MacBook Air
Model Identifier: MacBookAir6,2
Processor Name: Intel Core i5
Processor Speed: 1.4 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache (per Core): 256 KB
L3 Cache: 3 MB
Memory: 4 GB
Chipset Model: Intel HD Graphics 5000
Type: GPU
Bus: Built-In
VRAM (Dynamic, Max): 1536 MB
Vendor: Intel (0x8086)
Device ID: 0x0a26
Revision ID: 0x0009
Displays:
Color LCD:
Display Type: LCD
Resolution: 1440 x 900
Pixel Depth: 32-Bit Color (ARGB8888)
Main Display: Yes
Mirror: Off
Online: Yes
Built-In: Yes
So I was editing a project the other day. The project is not that big either. I have a bunch of small clips with a few keyframes automating some effects. Same for title stills. Whenever I render them for a quick preview, which is the only way to see how I'm doing when lining clips up to an audio track, my machine slows down considerably. Is Premiere Pro CC the one at fault? It used to run incredibly well on my machine. I understand yes, my gpu is on the low side and my cpu as well, but with 4gb of ram its hard to believe that its even struggling. Not sure what to do now with my work. It's frustrating that I can't edit at the speed I want, with hiccups every few seconds, sometimes my whole machine shutting down due to running out of memory.
PeaceWith those specs, I'm surprised that it runs at all.
What kind of PC to use? -
PRINTING KEY COMMANDS/ EDITING VOCALS/LOGIC PRO 7 compared with Logic 8
Dear all,
q1: i am trying to print the key commands. A way to do this is by Copy Key Commands in the Options pull down menu and then paste it onto a text editor (e.g word). My problem is, when I paste it onto word the names of the commands appear but the actual key commands on the right do not, and some symbols appear on the left of the names where they should not. Is there a simple way to print the key commands. My word processor is a 2004 word version and my Logic Pro 7 about a year old.
q2: I am recording a multitude of vocals. Which window would you find most practical for quick and effective editing? the arrange window or going into each region by double click and trim detail there? I somehow seem to prefer the arrange but would welcome any suggestions.
q3: I feel much more comfortable using Logic Pro 7 as Logic 8 does not advance my workflow yet. Am I alone in thinking in these terms. Would you agree on the possibility of users sticking at 7 for quite some time, maybe a year or two before they switch to 8 if at all. I d be very interested to hear anyones thoughts on this
Thank you all for reading. if you can spare a thought ot two I d be so thankful.
NikMy experience is that I only learn a few key commands at a time.. ie really use them and remember them. Therefore go to the KC window and open up the commands where you want to concentrate your learning. Then take a Screenshot
(Command + Shift + 4 and draw a box) which appears as a Picture 1 on your desktop. Then just refer to that
many users ( me included) are still working in L7 with occasional experimental forays into L8
Those really on top of L8 have committed early on and really gone for it.. if you dont have a high new info tolerance or are not particularly software savvy.. stick with L7
Maybe you are looking for
-
I have called Lenovo for Recovery Discs to be shipped to me since I have none to fix my laptop which came pre-installed with Windows 8. THEY verified my serial number to make sure it was still under warranty. I told the rep I had Windows 8 to make su
-
Ipod Freezes on Exact Same Song as it starts. Virus?
My ipod freezes every so often on just one song, at 00:00. Its done it a good few times now. I can't reset it, no matter how many times i try. I have to wait a good 5 minutes and it will just start replaying my songs again from the begginning. Could
-
1. How to assign a proxy group for AD approval process? Right now the access policy is set to 'with approval' and can be approved only by system admin and not the Ad admin group. Assuming the above will work in future.... 2. How to send an email noti
-
Hi experts, below is the output of show policy-map. PE3-AMS-EU# show policy-map int serial 3/0/10:0 o Serial3/0/10:0 Service-policy output: rao-pe-out Class-map: pe-management-output (match-any) 0 packets, 0 bytes 30 second offered rate 0 bps, drop r
-
Cfindex fieldboost does nothing - CF10
Using cfindex to attempt to boost the "Question" field over the "Answer" field of Q&A data. I see no effect from adding anything in the fieldboost field on the index. <cfindex action="refresh" collection="faq" type="custom" title="question" body="que