Slow entry into transaction SQ00

Hi Experts,
We currently have a slight performance problem when entering transaction SQ00 (ERP6).
The performance problem does not lie with any of the queries, but with the slow response time (~30 seconds) when entering the transaction for the first time.
Once entered for the first time, all subsequent enterings of the transaction are very quick.
I vaguely recall a similar problem with HR, where running something like OM_SETTINGS_DELETE sorted the problem.
I can't find any reference to this particular issue for SQ00 on Google, SDN, etc. - has anyone had a similar experience and found a solution?
Regards,
Chris W

Hi,
Please refer to this note Note 359883 - SAP Query: Performance/user group maintenance
Thanks,
Deepthi

Similar Messages

I am getting error messages when keying entries into SAP in transaction cod

I am getting error messages when keying entries into SAP in transaction code F-02. It will tell me that an asset doesn't exist in the company code I am posting to when the asset does exist. For example in the parked document 101079622 it tells me that asset WV0707711 doesnt' exist in CoCode . But what is keyed in the document is WV07077 1 1.
And when i look in Transaction AS03 for this asset number it does indeed exist in Co Code. Also if you take these assets out and park it and then go into Transaction FBV2 and add the asset back into the document it will add it and then post to it. This happens often and is very time consuming. I need to know how to fix this without all this additional effort

Hi,
it is urgent can any one help on this.
Thanks,
Sridhar Reddy.G

Clearing of GR/IR Account for initial stock entry into the system

Hi All,
We MM team did some initial stock entry into the system using MVT TYPE 561 in migo transaction. But in the FI, When GR/IR clearing account was checked, these entry's caused by the initial stock entry are not cleared. when tried to clear It gives a message saying this cannot be manually cleared.Do any of you know what should be done in this case?

I have one more Questiion, in my company there is some amount that is not balancing. We feel that is due to the initial stock entry of the Materials is there a way to view what was the value stock on a particular date by particular movement type, we have transaction in MM but that does not give the currency, in the currency column it says $0.00.

How to write plan data into Transactional Cube from Visual Composer ?

Dear experts,
Visual Composer is very powerfull to build a 'nice-looking' web-report (I think is much better than Web Application Designer in term of freely position the chart/graph/table/selection parameter in anywhere we like. We can't have this flexibility in WAD) plus it also has strong integration to R/3 for posting the transactions via RFC-Enabled Function Module (such as changing customer credit limit, approve PO, approve Sales Order, etc), so that the R/3 user won't even have to know the TrxCode.
In addition to this, I just wondering if VC also capable to write plan data into transactional cube via Write-Enable Query. We can simply insert a BW Query into VC as planning layout (set the edit-mode to "editable") plus having some Wizards to make it more user-friendly and self-explanatory for the users.
But I am not sure how to save the changes back to transactional cube from VC.
Could anyone please kindly advise how to achieve this.
"Seeing is believing" is always my learning method, so I would appreciate some "actioanable" explanation or hints.
Many thanks,
Sen

Hi Sen,
As far as I know, it's not possible to write data into transactional cubes directly from a table in Visual Composer through standar method, but it's possible to integrate a WAD with your input ready query into a URL element in VC (You can fill entry variables in VC and call WAD dinamically), so it's possible to create a planning application in VC calling dinamically WAD's.
Another way to interact through VC is creating button objects that calls planning sequences (with BAPI calling RSPLS_PLSEQ_EXECUTE). Also can fill variables in VC and pass them to sequence.
Regards,
Enrique

Include table entries into Transport Request manually @ SM31

Hi All,
I have an issues reg table maintenance at SM31.
We have a Z Table and I can add entries at SM31 to that table. But:
System has not asked Transport request while saving the data (after additions to the table)
Option to include in Transport Request manually is not available @ menu -> Edit -> Transport -> Include in request. Include in Request is not highlighted to select here.
Pls help me the process to add my table entries into a Transport Request.
Thank you
Chandu

Hi,
seems like your table is defined as Application table (master and transaction data).
Check SE11 to be sure
Database table: enter name > Display > Delivery & Maintenance
Delivery Class > is this A?
If so then there is no transport and it can be maintained in all systems.
You could try if required to create manual transport via SE01.
Programm ID: R3TR
Object: TDAT
Objectname: your table name
Regards
Hein

Manage a new entry into V_T020R table for RFEBBECODA00 program

Hello SDN,
For the bank statement integration with the Belgium format Coda 2.1, I need to use a new conversion program so called RFEBBECODA00. This program is an update of RFEBBE00.
The customizing table V_T020R (OT61 transaction) allows to manage a dedicated variant for FEBC user transaction and the program used for file conversion to Multicash.
I do not need to use anymore RFEBBE00 program, but I am not able to manage a new entry into V_T020R for the new program RFEBBECODA00.
Any idea on how too update V_T020R in order to keep using FEBC transaction ?
Many thx for your help.
Regards,
Aurelien

Guess you have completed all the manual activities specified in the attachmet to the following SAP Note.
https://service.sap.com/sap/support/notes/1035142
In the attachment titled "Manual_Activities_Required_FI.doc" to the above SAP Note, the last step to add an entry to table T020R. I was just wondering if completing the manual activities is a prerequisite to add a new entry to the table T020R. As such, if you go to OT61 transaction, you don't see the 'New Entries' button.
The attachment to the above SAP Note has the following text as a last step.
Also maintain the following entry in Table T020R:
MANDT TCODE REPID VARIANT NSHOW
000 FEBC RFEBBECODA00
Activate the table. Now run transaction FEBC and check if the program RFEBBECODA00 is being displayed.
As per the Note, complete the manual activities, then apply the correction instruction in the Note, activate the program and then maintain the text symbols and selection text a shown in the document. Just check the note in the above link and follow the instructions. Let me know if you finally succeed in maintaining this entry in table T020R. I'll be happy to hear a 'yes' from you!

Can't make entries into Roboform Lite 2.1?

I have loaded and reloaded RFL (and have disabled KeeFox), but I still am not able to make any entries. For example, when clicking on the Identity icon, the tooltip says I should "set an active identity," but there is no dropdown into which information can be entered. Furthermore, when typing into a blank field, I get two, not one as usual, vertical cursor lines that follow the typing. When RFL is disabled, this doubling goes away. To tell you the truth, I'd be happy (I think for the time being) with KeeFox and form filler. I did dl Autofill, but it seems to be rather complicated in its setup.
EDIT
Have found out how to make entries into RFL: Download Roboform, make entries, and the RFL will pick up those entries. So now my self-debate is to continue with the combo of Keefox+Autofill which is working well, or go over to RF+RFL?

This will fix your google toolbar and it works with firefox 7 or 8 or any of them, even if you can't sign in it will still have spell check and all the other stuff. Down load this firefox add on and then it will bring up another page with instructions after you down load and restart firefox, restart it twice and you're good to go. below is the link. https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/?src=api|https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/?src=api

Is there a way to stop the OS from switching to a newly opened app? I would like to be able to continue what I'm doing while I wait for an app to launch and not get interrupted by a forced entry into the app.

Is there a way to stop the OS from switching to a newly opened app? I would like to be able to continue what I'm doing while I wait for an app to launch and not get interrupted by a forced entry into the app.
As an example, I'm going to my email in safari, while I wait for it to load, I open an excel document, and the OS decides excel should be the front app, so I go back to safari so I can enter my login info, but halfway through my password the OS decides that excel is where I should finish typing my password.
VERY ANNOYING. Can I open apps in the background?

Thank you everyone for the suggestions. J D, I'm not a terminal fan, but I'm sure it works. I found a solution that I can use in the dock from another post.
Annoyed by Mac OS
Works great and allows me to maximize those multitasking minutes.

I am using GUI_DOWNLOAD FM to download my internal table entries into .xls

Hi
I am using GUI_DOWNLOAD FM to download my internal table entries into .xls file. but it's not download total records in final table.
in debugging it showing total records.
exporting:
filename
filetype
field-suprater
header
tables
data_tab
fieldnames
plz help me.
thanks
Sankar

Hi
Use as below:
CALL FUNCTION 'MS_EXCEL_OLE_STANDARD_DAT'
EXPORTING
file_name = p_file " path offile where u need to download
CREATE_PIVOT = 0
DATA_SHEET_NAME = ' '
PIVOT_SHEET_NAME = ' '
PASSWORD = ' '
PASSWORD_OPTION = 0
TABLES
PIVOT_FIELD_TAB =
data_tab = int_data "internal table with data
fieldnames = int_head "internal table with header
EXCEPTIONS
file_not_exist = 1
filename_expected = 2
communication_error = 3
ole_object_method_error = 4
ole_object_property_error = 5
invalid_filename = 6
invalid_pivot_fields = 7
download_problem = 8
OTHERS = 9
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Regards,
Sreeram

How to pass parameter into transaction iview ?

Hi experts,
I want to know "how to pass parameter into transaction iview ".
Regards,
Krishna Balaji T

Hi Krishna,
Not sure if this can help you.
1) Passing a parameter to a transaction iview (I saw a resolved suggestion)
Passing a parameter to a transaction iview
2) Passing a parameter from the portal to R3 (helpful info for you)
Passing a parameter from the portal to R3
3) Create SAP Transaction iView using SAPGUI for Windows (Great Blog and info about TA Iview)
Create SAP Transaction iView using SAPGUI for Windows
Please check the following link for Transaction Iviews
http://help.sap.com/saphelp_nw2004s/helpdata/en/02/f9e1ac7da0ee4587d79e8de7584966/frameset.htm
Just some info: Portal is basically what the end user can see. What he can do, is still maintain in the backend system. If there are parameters setup already for the user in the backend system (in SU01), then those parameters should still valid for the transaction that the parameters are linked to.
Hope that helps and award points for helpful suggestions.
Ray

Transform sap query into transaction

hi!
my question is not related to mm but also not to other forums in this site.
i'm trying to transform sap query into transaction using se93 transaction.
i just learing sap in a class and we use an old version of sap.
user group name: ofer6
infoset name: ofer9
query name: ofer8
all created in global area
when i enter se93 i write t-code ZSTART and press "create".
then i choose: "transaction with parameters" in the popup window.
in the second screen i write the transaction ZSTART again.
i mark "skip initial screen" and "inherit gui attributes"
at the bottom of the page in "default values" i use the following:
D_SREPOVARI-EXTDREPORT     OFER8
D_SREPOVARI-REPORT          OFER6 G
D_SREPOVARI-REPORTTYPE     AQ
when i press enter i get messages:
transaction ZSTART does not exist
Screen 0000 of program does not exist
The field D_SREPOVARI-REPORTTYPE does not exist on the called screen
The field D_SREPOVARI-REPORT does not exist on the called screen

Hi,
Please check the link below:
http://www.freesaptutorial.com/how-to-create-transaction-code-in-sap-using-se93/
Hope this will be helpful to you.
Thanks,
Neeraj

Table entries into VIRSA_CC_ALLASTRUN

Hi folks,
As per Note 1015921, I am trying to configure Alerts in CC.
It advocates to insert table entries into table VIRSA_CC_ALLASTRUN on AS Java.
Where and how do you execute these insert statements, so that the table records are modified?
Pleaset let me know.
Regards,
Reddy P.

Thanks. My issue is resolved now.
Basically, the FM /VIRSA/ZCC_GET_STATREC_DATA was giving abap dumps with not enough sort memory available on ERP system. Once that was fixed, the alert job ran like a charm.
We did not have to modify the table level details in AS Java.
Regards,
Reddy P.

Best-practice to redistribute NAT entries into OSPF

I have several different subnets that are all either NAT'd or accessible via a VPN. There's no actual route on the ASA to the addresses, and they're not directly connected, eliminating the usual redistribution commands.
What is the best-practice for redistributing such entries into an OSPF area? In the past, I've had static entries on the upstream firewall, allowing the rest of the network to see this. I'm trying to get rid of as many static routes as possible (or at least make them a floating route so as to provide backup should something in OSPF fail), but am having difficulty figuring out how to redistribute these into the OSPF area.
I can't use a summary-address command as there's no external routes that are being redistributed. The area range command is out as I don't have a separate area that routes are being redistributed from.
One thought I've had is to create a static null route for each subnet (allowing me to redistribute static, and have the static entries only on the originating box), but I imagine rather than NAT'ng or open the site-to-site VPN, it would discard traffic (as the destination is null).
Any ideas on what to do when you have "imaginary" addresses that don't exist anywhere but in NAT entries or that's defined as interesting traffic for a site-to-site VPN?
Thanks in advance.

I have the code working without use of config files. I am just disappointed that it is not working using the configuration files. That was one of the primary intents of my code re-factoring.
Katherine
Xiong , If you are proposing this as an answer then does this imply that Microsoft's stance is not to use configuration files with SSIS?? Please answer.
SM

Attach Pdf output into transaction FB03

Hi experts,
My requirement is to attach Pdf output coming from FM CONEVRT_ABAPSPOOLJOB_2_PDF
into transaction FB03 (SERVICE attachment list)
Needs pointers for this.
thanks
Manish Puri

Hi
ZPO_PDF is the transaction code.
You can create this transaction code using transaction SE93 and assigning the program RSTXPDFT4 to it.
Thanks & Regards
Kishore

Are there any standard Idocs or Bapis for posting the data into transaction

Hi,
Are there any standard Idocs or Bapis for posting the data into transactions ME42N and IK11?
Thank You.

Thank you.
Any idea of the other one?

Slow entry into transaction SQ00

Similar Messages

Maybe you are looking for