Slow Exchange Migration

I am currently on exchange 2007 SP3 RU11
i want to install exchange 2013, but i'm wondering if I can do the install and slowly test things and migrate
if i run the exchange 2013 install, can i have it coexist on the side but keep everything pointed to my exchange 2007 environment till i'm ready to move over?
currently use
outlook 2013 MAPI clients
outlook 2011 EWS os x clients
active sync clients
no OWA
thanks, couldn't find a lot of info on this.

Yes, you can install exchange 2013 in you current exchange 2007 environment.
When you say slow migration, then I would suggest you the following steps:
1: Cut-Over CAS and MailFlow first to check how things are working, with OWA, AS,Outlook Anywhere etc.
2: Test the Mail flow as it will be flowing via exchange server 2013.
Test all these at least for 1 to 2 weeks
Once you think its working fine, start with Pilot mailbox migration (I choose IT department users)
Test it for a week or so. Test the Public Folder Migration/Replication.
Public Folder replication should be easy and make sure Pilot Users are able to access Public Folder from Exchange 2013 and also they are able to create the Public Folders too.
And once all goes well, you are safe to start full flesh migration.
Cheers,
Gulab Prasad,
Technology Consultant
Blog:
www.exchangeranger.com 
Twitter:   
LinkedIn:   
Check out CodeTwo’s tools for Exchange admins   
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Similar Messages

  • Startup slow after migration to new MacBook Pro

    startup slow after migration of 2008 MacBook Pro to 2014 MacBook  Pro

    That crash is citing an issue with a ColorSync profile - the AdobeRGB1998 one.
    Try launch ColorSync Utility and see if you can repair it.

  • Generic Groupwise to Exchange Migration Advice

    Good afternoon folks, I am after some general advice/guideance on a migration project that I am about to start working on.
    We're taking a Novell eDirector/Groupwise environment to Microsoft AD/Exchange...I know there's tools/utils that will do the migration but I am just after some general real world experiences/gotcha's etc.
    The AD will be a nice new Win2008 R2 AD so first question is, what order should I approach this in..
    Build new AD
    Install Exchange
    Migrate User Accounts/Data
    Migrate Groupwise to Exchange
    or
    Build new AD
    Install Exchange
    Migrate Groupwise to Exchange
    Migrate User Accouts/Data
    To me the first looks more logical but I'm looking for advice from the trenches so to speak....
    Also, what utils/tools would you recommend for the migration and co-existence?

    Hello,
    I think you can do migrate Groupwise to Exchange at last.
    Here is one related document for you, hope can give you some help:
    http://www.msexchange.org/articles_tutorials/exchange-server-2007/migration-deployment/groupwise-exchange-2007-interoperability-migration-part1.html
    Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or
    suitability of any software or information found there. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
    Thanks,
    Evan Liu
    TechNet Subscriber Support in forum
    If you have any feedback on our support, please contact
    [email protected]
    Evan Liu
    TechNet Community Support

  • Exchange Migration Workflow down

    Using Exchange 2013 CU6 Standard with 2 Server in a DAG. Both Servers with the same Patchlevel. Last night the "Microsoft Exchange Migration Workflow" goes down. When I try to restart the Service goes imidetly down again.
    Application Event says every time: Event ID 4999 from Source "MXExchange Common":
    Watson report about to be sent for process id: 10984, with parameters: E12IIS, c-buddy-RTL-AMD64, 15.00.0995.029, M.E.Diagnostics.Service, M.E.Diagnostics.PerformanceLogger, M.E.D.P.PerformanceLogSet.StartLog, System.ArgumentException, 95c6, 15.00.0995.012.
    ErrorReportingEnabled: False
    Mailbox-Migration only works on the second node where no problems with Migration Workflow Service detected.
    Any ideas?

    Hi
    In my case the event 4999 shows:
    Watson report about to be sent for process id: 12992, with parameters: E12IIS, c-RTL-AMD64, 15.00.0995.029, MSExchangeMigrationWorkflow, unknown, M.E.M.L.L.<>c__DisplayClass11.<GetLocalServerData>b__10, System.NullReferenceException, 49af,
    unknown.
    ErrorReportingEnabled: True
    Does that solution apply too? or it has another problem?, because began to raise another events like 1001 from Windows Reporting:
    Fault bucket , type 0
    Event Name: E12IIS
    Response: Not available
    Cab Id: 0
    Problem signature:
    P1: c-RTL-AMD64
    P2: 15.00.0995.029
    P3: MSExchangeMigrationWorkflow
    P4: unknown
    P5: M.E.M.L.L.<>c__DisplayClass11.<GetLocalServerData>b__10
    P6: System.NullReferenceException
    P7: 49af
    P8: unknown
    P9:
    P10:
    Attached files:
    C:\Windows\Temp\1e07ce7f-6e1c-49ce-a995-6152985231ac\report.txt
    C:\Windows\Temp\1e07ce7f-6e1c-49ce-a995-6152985231ac\report.xml
    These files may be available here:
    Analysis symbol:
    Rechecking for solution: 0
    Report Id: c3dece0a-76c6-11e4-80d0-6cae8b1d2a4b
    Report Status: 262144
    Hashed bucket:
    But I cannot find the file report.txt and .XML even if I select to show hidden ítems.
    In the active node of the dag, that service is running without problems, but in the other node stops....
    or raise Eventid 7031 Service Control Manager:
    The Microsoft Exchange Migration Workflow service terminated unexpectedly.  It has done this 1 time(s).  The following corrective action will be taken in 5000 milliseconds: Restart the service.
    This raise every 10 seconds... even if I set that service in Manual startup type.
    I noticed this when I tried to add a database copy with no success...
    Exchange 2013 CU6 and all patch applied until this week.

  • SBS2011 Exchange Migration (Server configuration change is temporarily preventing access)

    Greetings,
    I 've begun an exchange migration from SBS2011 (Exch 2010) to 2013 Exchange.  I am on this step of the deployment assistant, for reference,  http://technet.microsoft.com/en-us/exdeploy2013/Checklist?state=2419-W-EQBEAgAAQAAAAQEAAQAAAAg~
    I can login and access any users mailbox with the respective credentials if their mailbox is on the SBS exchange server.
    Ive migrated a couple test users, and while I can access their owa box if I browse to the localhost of the 2013 server, I cannot access their mailbox internally nor externally if I go to the external FQDN of the owa site.  All other users with mailboxes
    still on the 2010 exchange work.
    I get this message for those with mailboxes on the new server: A server configuration change is temporarily preventing access to your account. Please close all Web browser windows and try again in a few minutes. If the problem continues, contact your helpdesk.
    Any ideas?
    Thanks!

    Hi,
    On current situation, please check if you move mailboxes to the new Database properly. Please refer to Olaf’s
    solution in following thread and check if can help you.
    OWA
    not working after SBS2008 to SBS 2011 Migration
    If any update, please feel free to let me know.
    Hope this helps.
    Best regards,
    Justin Gu

  • Exchange Migration from One domain to another domain on same forest

    Team, 
    we are in the process of migrating exchange infrastructure from one child domain to another child domain within same forest.
    root domain - root.com
    child domains - US.root.com and EMEA.root.com
    EMEA and US Domains setup are different from each other. Like EMEA has different email address policy , Email Flow than US , connectors etc.
    Now we need to migrate all emea users under US Domain. based on the geographical locations, we are building a new dc, mailbox , cas servers on EMEA location , but these servers will be part of US Domain.
    for CAS Servers - we are planing to register respective sites ( site affinity), so all the local requests will be handled by new cas server which is built under US Domain.
    Mailbox Servers - we would be creating new db's and the limits  on new mbx server and going to replicate as its on EMEA Mailbox server.
    can some one please let us know what are the precautions , recommendation, sequence which we need to follow to perform smoother migration. as of now , I can think of below topics.
    Mailbox Migration  -I  Have a script , which
    will take care of mailbox movement once the objects are being moved.
    Contacts Migration - Willard Martin blog helped me to perform migration
    DL Migration - I believe there is no mechanism to migrate DL. only option is to recreate.
    Email address Policy:we would be creating a new address policy and apply to OU's
    DB Consistency check – do we have to perform the health checks on source mailbox server to see , the servers are free from errors /corruption.
    Check outlook configuration - After the migration, we need to check and see , the exchange server/ auto discover works and identify the new exchange servers.
    Internal /External Email flow.- 
    Active Sybc , OWA
    Public folder Migration -
    Offline Address Book
    Certificates
    any help or suggestions would be great.
    Srinivasa K

    Hi Srinivasa,
    According to your description, I think you have done all the preparation.
    For DL migration, the following article may give your some hints:
    How to Migrate Distribution Groups Across a Forest
    Good Luck!
    Niko Cheng
    TechNet Community Support

  • Time machine backup is very slow after migration to Mountain Lion

    After I migrated to mountain lion, Time machine backup is very slow. Time machine preference says there is no previous back up although I had Time machine on before migration. It did not help verymuch to connect an ethernet cable between my timecapsule and my Macbook Pro
    Here are the screenshots I see:
    Should I erase the previous backup made on Lion before backing up on Mountain lion? in this case how do I transfer the Lion backup file on another disk just in case something goes wrong before I have a good backup under Mountain Lion? just like any other file?

    After further reading on the forum, the problem was solved: I used the possibility to back up on a second disk (in the preferences Time Machine choose a disk and save on both disks) to make a back up on another usb disk, and then erased the old .sparsebundle file on my Time Capsule. I have then re defined time capsule as the back up disk and then the backup was muuuuuch faster (one night instead of less than 1 giga after 3 days.....)

  • Exchange Migration 2010 to 2013 different AD domains....

    Here's my situation, I have migrated our users AD accounts to a new domain (newDomain.corp), but still use the exchange server in our old domain (oldDomain.corp) with linked mailboxes, which work fine. 
    I am now to the point where I want to decommission our old 2010 exchange server in the old domain, or at least have the users mailboxes on a new Exchange 2013 box belonging to the new domain. 
    I am looking for the best way to migrate the users mailboxes from the EXCH01oldDomain.corp (2010 Exchange server) to the new exchange 2013 server EXCH01.newDomain.corp, yet still have both servers online serving mailbox roles for users for a limited
    time. So basically, can i have 2 exchange servers from different domains serving the same users in newdomain.corp? 
    Free busy and calendaring all have to work.
    Thanks!
    richard

    Hi Richard,
    Please make sure the two-way trust between the new domain and old domain has been set up.
    Generally, when we run New-MoveRequest cmdlet to move a mailbox from an Exchange source forest (Old domain) to an Exchange target forest (New domain), the target forest must contain a valid Mail-Enabled user account with the set of AD attributes.
    Since the mailboxes in old Exchange 2010 are all linked mailbox
    which have Mail-enabled user accounts in new forest, we can directly move the mailbox from old Exchange 2010 to new Exchange 2013.
    We can use the Prepare-MoveRequest.ps1 script with the -UseLocalObject to move mailbox with the existing AD account in new domain:
    http://technet.microsoft.com/en-us/library/ee861103(v=exchg.150).aspx
    Regards,
    Winnie Liang
    TechNet Community Support

  • Exchange Migration

    Hi All,
    Require some help if possible.
    Migrated a company from a 3rd party exchange provider over to our own internal exchange.
    Users are now unable to edit or change calendar items that existed prior to the migration, a bounceback is below.
    They have full permissions over the calendars, this has been confirmed and rechecked. I know this for certain as new items can be created.
    The bounceback I see is like below:
    Delivery has failed to these recipients or groups:
    [email protected] You can't send a message on behalf of this user unless you have permission to do so. Please make sure you're sending on behalf
    of the correct sender, or request the necessary permission. If the problem continues, please contact your helpdesk.
    Diagnostic information for administrators:
    Generating server:
    [email protected] #MSEXCH:MSExchangeIS:/DC=local/DC=uptime:USEXMB2[578:0x000004DC:0x0000001D]
    #SMTP#

    How is the co-existence working between 2 forest?
    Is it happens to all the Calendar items or some of them?
    Did you had a chance to look at this thread?
    http://social.technet.microsoft.com/Forums/exchange/en-US/128f9a31-e805-4dd9-8255-629d871b90d3/you-cant-send-a-message-on-behalf-of-this-user-unless-you-have-permission-to-do-so?forum=exchangesvrgeneral
    Cheers,
    Gulab Prasad,
    Technology Consultant
    Blog:
    www.exchangeranger.com 
    Twitter:   
    LinkedIn:   
    Check out CodeTwo’s tools for Exchange admins   
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

  • Getting Slow after Migration to a new Mac

    Every time, I've bought a new Mac and using Migration Assistant to migrate my data to new Mac. The new Mac is getting slower, not look like a hardware upgrade. For example, my Macbook Pro i5 needs more than 10 seconds to start MS Word while my MBA needs less than 2 seconds.
    Will there so many scrap or unused data migrated from my old mac? And my "migration data" has been accumulated for several times since 5~6 years ago. I've used this "migration data" for every new Mac arrives. So, This is not the first time I've expereinced, this was happens several times when I bought a new Mac.
    Please note that Spotlight Indexing is complete.
    Thanks.
    Regards,

    Thanks for your suggestions. I've updated the software already (noticing that it was system, i-movie and garage band which were being updated) but that didn't help. Previously that did help for i-photo though.
    Anyway, I tried the sudo thing, I got the following messages but still no i-movie :
    updatedyld_sharedcache: warning mismatched install path in /System/Library/CoreServices/RawCamera.bundle/Contents/Resources/MetadataLib.dy lib for /usr/lib/libgcc_s.1.dylib
    updatedyld_sharedcache: warning mismatched install path in /System/Library/CoreServices/RawCamera.bundle/Contents/MacOS/RawCamera for /usr/lib/libgcc_s.1.dylib
    updatedyld_sharedcache: warning mismatched install path in /System/Library/CoreServices/RawCamera.bundle/Contents/Resources/MetadataLib.dy lib for /usr/lib/libgcc_s.1.dylib
    updatedyld_sharedcache: warning mismatched install path in /System/Library/CoreServices/RawCamera.bundle/Contents/MacOS/RawCamera for /usr/lib/libgcc_s.1.dylib
    updatedyld_sharedcache: warning mismatched install path in /System/Library/CoreServices/RawCamera.bundle/Contents/MacOS/RawCamera for /usr/lib/libgcc_s.1.dylib
    updatedyld_sharedcache: warning mismatched install path in /System/Library/CoreServices/RawCamera.bundle/Contents/Resources/MetadataLib.dy lib for /usr/lib/libgcc_s.1.dylib
    Any other ideas?

  • Exchange Co-existing Migration not completing (Event ID's 1006 - Mailbox Replication, 2002 - Exchange Migration)

    Hi Guys,
    a few issues all relating to AD/Exchange Setup, Causeing migration issues.
    quick overview:
    1. installed new server (Server 2012 R2), installed exchange 2013 install completed properly, issues logging into ecp and owa, ssl certs werent created, created manually didnt solve. - scrapped that server deleted from adsi exchange administration servers
    (time spent troubleshooting was 5 days)
    2. fixed ca issues, re-installed server installed exchange 2013, /preparead ,system mailboxes created migration mailbox created, create mailbox db, system mailboxes are there if checked with get-mailbox -arbitration
    Try to migrate, migration mailbox not found in organization (accounts were there, made sure change user password on logon was not ticked on the account and never expire was ticked, account was disabled like it should be too so no go.
    delete all system accounts from ad, recreate with /preparead, enable them according to articles:
    http://technet.microsoft.com/en-us/library/gg588318%28v=exchg.150%29.aspx
    http://www.telnetport25.com/2013/01/quick-tiprecovering-from-a-missing-migration-mailbox-in-exchange-2013/
    http://social.technet.microsoft.com/wiki/contents/articles/5317.recreate-and-enable-missing-arbitration-user-accounts-and-mailboxes-in-exchange-server-2010.aspx
    http://social.technet.microsoft.com/wiki/contents/articles/6874.how-to-recreate-system-mailbox-federatedemail-discoverysearchmailbox-in-exchange-2010.aspx
    get-mailbox -arbitration found all mailboxes, check w/o -arbitration and discovery mailbox was there too.
    3. Tried migration again no errors in ecp, migration not starting, encountered above error id's
    Error 2002 - MSExchange Migration
    error info ('Migration.MigrationMailboxNotFoundException|The migration mailbox for the organization is either missing or invalid.
    Error 1006 - MSExchange Mailbox Replication (ps: no dag's setup yet either)
    -> error info ('The Microsoft Exchange Mailbox Replication service was unable to process jobs in a mailbox database.
    Database: CL1-3_Main-DB
    same error for each db on the server with different mailboxes
    Error: Couldn't find system mailbox '6d5f301b-7323-47c1-85eb-a76a01b9b3c0' in Active Directory.')
    Error: Couldn't find system mailbox 'f6ba51f8-c076-42e9-b00f-014a1c6b3634' in Active Directory
    Error: Couldn't find system mailbox 'SystemMailbox{eae9aad5-0984-440d-b37c-7a399961e171}' in Active Directory.
    Error: Couldn't find system mailbox '8c6d0335-af32-41e3-86b1-e4c15fd14a23' in Active Directory.
    SystemMailbox{eae9aad5-0984-440d-b37c-7a399961e171}' is in Active Directory and mail enabled according to above articles.
    also received this error id 1006 - MSExchangeDiagnostics
    error info ('The performance counter '\\CL1-3\LogicalDisk(HarddiskVolume17)\Free Megabytes' sustained a value of '207.00', for the '15' minute(s) interval starting at '8/22/2014 7:12:00 AM'. Additional information: None. Trigger Name:DatabaseDriveSpaceTrigger.
    Instance:harddiskvolume17')
    I don't want to reinstall again as i feel that would just add wood to the fire... can anyone help diagnose this?
    been trying to fix this myself for over a month.
    Thanks!!

    Hi,
    Even if you think re-installation is annoyed, I still suggest perform the re-installation.
    Because fix this issue also annoyed.
    Remove the Exchange server and use ADSIedit to clear it up.
    Also remove the Windows server 2012 from AD.
    Then re-install Windows server 2012 and Exchange 2013 server via articles from TechNet.
    Thanks 

  • Slow Mailbox Migration

    Hello All 
    We are in coexistence with 2007 and exchange 2013 and everything is working fine except mailbox migration, which is taking very long. 
    Mailbox size is average 200MB and migration for 10 mailboxes takes about 12 hours, even within the same LAN and across WAN link
    The architecture is
    DataCenter 1
    2007 Environment
    2013 CAS1
    2013 Mailbox1
    2013 Edge
    DataCenter 2
    2013 CAS2
    2013 Mailbox2
    2013 Edge2
    Has anyone experienced problems like this before?
    Thanks

    Hi,
    If the servers are performing other higher priority jobs, the mailbox movements will be stalled. When the servers get freed up from higher priority jobs, the mailbox movement resumes.
    I recommend you use the New-MoveRequest cmdlet with the Priority parameter to check the result.
    If only some mailboxes are affected, you can set the BadItemLimit parameter to a higher value to check the result.
    Best regards,
    Belinda
    Belinda Ma
    TechNet Community Support

  • Need help with the Exchange migration task (SBS2003 to SBS2011)

    Hi,
    I am currently migrating from SBS2003 to SBS2011.  Here is the environment configuration currently;
    Old Server - SBS2003
    New Server - SBS2011
    DNS is handled by Godaddy and I have DNS records pointing to the single IP issued by our internet provider (MX records, locator, etc).
    My trusted certificate has been resigned and installed on the new server.
    The "configure internet" and "migrate network settings" has created rules on the router for uPNP and pointed 80,443,25, etc to the new servers's internal IP.
    The new server's remote web workplace is functioning and users are able to use the RDP gateway piece.
    I have gotten to the step of the migration wizard - "Migrate Exchange Mailboxes and Settings"
    and this is where I need help.  I am on the step "Remove the Exchange Server 2003 Internet connectors from the Source Server" and I don't find the "SmallBusiness SMTP connector".  I don't want to proceed because I don't
    know much about mail routing and what has or hasn't been done by the rest of the migration tasks.  I think e-mail may already be routed through the new server but I don't know really.
    How should I proceed?

    Hi,
    Just addition. Please also refer to following articles and check if can help you.
    Move Exchange Server mailboxes and settings
    for Windows SBS 2011 Standard migration
    SBS 2003 to SBS 2011 Migration
    Guide – v1.4.0
    If any update, please feel free to let us know.
    Hope this helps.
    Best regards,
    Justin Gu

  • Zoho Mail to Exchange migration

    Hi, 
    We are looking to shift from Zoho Mail and Calendar to Exchange Online (Microsoft hosted).
    What support can you offer to migrate all employees mail and calendar contents to Exchange? Does Microsoft offer this service or can you recommend a provider who does. This needs to be flawless as we can't risk losing information.  
    Thanks, 
    Martin

    Hi,
    I notice that you have asked this question on the answer Forum:
    http://answers.microsoft.com/en-us/office/forum/office_365hp-outlook/migrating-from-zoho-mail-to-exchange/560e88ec-fff4-4d4b-a96c-dbe10457f31f
    However, Exchange Online is different from Exchange On-Premises, I suggest ask Exchange Online Forum to double confirm whether Zoho can be migrated to Exchange Online. For your convenience:
    http://social.technet.microsoft.com/Forums/msonline/en-US/home?forum=onlineservicesexchange
    Hope you can get more professional suggestions there.
    Thanks
    Mavis
    Mavis Huang
    TechNet Community Support

  • Zenworks to SCCM before Exchange migration??

    We are currently a Novell shop and will be moving to all Microsoft in the next year. With that said, would you recommend having SCCM in production before migrating from Groupwise to Exchange?

    Totally unrelated products. The order does not matter. It could even be done in parallel.
    Torsten Meringer | http://www.mssccmfaq.de

Maybe you are looking for