Slow export for no reason

Hi fellow mac users. I have two macs. One of the macs has a much faster exporting speed that the other for Imovie HD. I heard about it being something about one using DV maybe?
Well it takes on the slow exporting mac 20 minutes to export a 10 minute clip in CD-ROM format. But on the other it takes about 4 minutes. Considering I don't want it to take 20 minutes because the 4 minutes quality is fine - how do I make it go faster again on this computer?
Thanks,
-G

Hi
Not really understanding Your problem I can make a guess.
The most common origin to that a Mac slows down is the amount of free space on
the internal (start-up) hard disk (no other counts)
• 5Gb or less - most probably Your Mac doesn't work or have an occult behaviour
• 5-10Gb might work but slow
• about 25Gb free space - my way of getting things done
Second reason:
DVD discs has a speed no: on them eg DVD-R x16 (most often to fast for most Macs
to make good burns) I use iDVD08 or Apple Disk Util tool to burn at x1 speed
Much better result and DVDs that most often works.
Yours Bengt W

Similar Messages

4S has slow wifi for no reason.

My 4S was getting blazing wifi speeds yesterday. Today it's been ridiculously slow. I've disconnected and reconnected to the wifi, but it hasn't helped at all. Any ideas?

Hi
Not really understanding Your problem I can make a guess.
The most common origin to that a Mac slows down is the amount of free space on
the internal (start-up) hard disk (no other counts)
• 5Gb or less - most probably Your Mac doesn't work or have an occult behaviour
• 5-10Gb might work but slow
• about 25Gb free space - my way of getting things done
Second reason:
DVD discs has a speed no: on them eg DVD-R x16 (most often to fast for most Macs
to make good burns) I use iDVD08 or Apple Disk Util tool to burn at x1 speed
Much better result and DVDs that most often works.
Yours Bengt W

Re: Slow internet for unknown reasons

Im sorry to hi jack this post but im ex0.38 experiencing exactly the same problems
DL Speed 1.96mbps
Upload speed 0.38mbps
Ping 61.75
FAQ
1. Best Effort Test: -provides background information.
Download Speed
1.96 Mbps
0 Mbps
2 Mbps
Max Achievable Speed
Download speedachieved during the test was - 1.96 Mbps
For your connection, the acceptable range of speeds is 0.4 Mbps-2 Mbps.
Additional Information:
Your DSL Connection Rate :8.13 Mbps(DOWN-STREAM), 0.45 Mbps(UP-STREAM)
IP Profile for your line is - 2 Mbps

welcome to the BT community forum where customers help customers and only BT employees are the forum mods
in order for the forum members to help please can you post the adsl stats from your router you may need to 'show detail' to get all stats (if hub enter 192.168.1.254 in your browser and navigate to adsl or if HH4/5 then go to troubleshooting then logs and you are looking for 2 line together when hub last connected to internet and they will show your connection speed and noise margin or if netgear enter 192.168.0.1).
are you connected directly via a filter to the NTE5 master or test socket or to somewhere else? Is the master the only phone socket in your home?
Have you tried the quiet line test? - dial 17070 option 2 - should hear nothing - best done with a corded phone. if cordless phone you may hear a 'dull hum' which is normal
Someone may then be able to offer help/assistance/suggestions to your problem
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

I have an external hard drive which has my i-photo on it & some movies from i-movie that I have on disk now. But for some reason my ehd has a caution symbol on it & I can't move my event to free up space on my hd so that I can export i-movie events. Help!

I have an external hard drive which has my i-photo on it & some movies from i-movie that I have on disk now. But for some reason my ehd has a caution symbol on it & I can't move my event to free up space on my hd so that I can export i-movie events. Help!

Usually the caution symbol means that it's formatted as a PC compatible format like NTFS or most likely FAT32. For iMovie to use it the ehd must be formatted Mac OS Extended. Then iMovie will show it without the caution symbol and you can drag/drop open any Event/Project from that hard drive.
To find out if it's formatted as PC:
Go to the desktop, holding down the Control key click on that ehd and in the pop-menu choose 'Get Info'
Under Format: It will say whether or not it's Mac OS Extended (Journaled). The only way to undo a PC formatted ehd would be to copy everything off of it first, Erase/Format the drive using Disk Utility in the Applications>Utilities folder on your Mac, choosing the Mac OS Extended (Journaled) format in the pull-down menu there.

I am using FC Express HD, and for some reason, when I export a Quicktime movie, the final movie will only play audio, and the video is black. I only get the actual video if I export as self contained, or if I exportusing quicktime conversion. Why?

I am using FC Express HD, and for some reason, when I export a Quicktime movie, the final movie will only play audio, and the video is black. I only get the actual video if I export as self contained, or if I exportusing quicktime conversion. Why?

I am using FC Express HD, and for some reason, when I export a Quicktime movie, the final movie will only play audio, and the video is black. I only get the actual video if I export as self contained, or if I exportusing quicktime conversion. Why?

Whenever I export, the speed of my clip is sped up for no reason.

Basically, whenever I export a little segment I chopped up (i.e. a ring tone) it is sped up for no reason at all. The speed of the clip is fine in my timeline on soundtrack but after, nope.
Help!

If I understand the question correctly, you are having a problem of the audio getting clipped to a shorter length after exporting from Soundtrack. This is a question that comes up here every week or so.
Take a look at this:
http://www.screencast.com/users/hatuckett/folders/Default/media/d781e0cb-8689-44 4e-9c49-7e8592e86052

PINWHEEL! Keeps popping up and slowing for no reason...

Anytime I am in safari or mail, the progress indicator will pop up for no reason and slow the show down for no reason! I have office installed, but never really use it, and only usually run safari, mail and itunes all at once.
I ran disk utility and came up with nada. Rebooted after removing the battery and holding down "C"...
Any ideas?

If the network is involved with the pinwheel, I generally find that it is a broken DNS server. While I prefer using the DNS servers from my ISP, if I experience problems, I generally give the OpenDNS server a try:
208.67.222.222
208.67.220.220
As an experiment, try entering these DNS server addresses in your Network System Preferences. If they do not work, you can always remove them and go back to the settings the way they were when you started.
NOTE: The first DNS server address is the most important, as name lookups will always wait for the first server to timeout before trying the 2nd server, so you want a reliable first server.

Lightroom mobile syncing is super slow and stop for no reason. cannot resume syncing. no idea with the progress of syncing. cannot sync the original file from mobile into desktop.

lightroom mobile syncing is super slow and stop for no reason. cannot resume syncing. no idea with the progress of syncing. cannot sync the original file from mobile into desktop. stuck and cannot process any further.

Hi. Did you trigger a delete data via LR preferences ->Lightroom mobile.
I'm not seeing a catalog connected to your account.
Did you import originals via the connection-kit?
Thanks
Guido

HT1695 Today for some reason my IPad won't fully connect to my iphone and tether. For instance under settings it shows next to "Wi-FiI'm connected to the Wi-Fi but at the top of the screen there is no connection symbol and in fact i am unable to load web

Today for some reason my Ipad won't tether properly. The iphone says it's connected and on the Ipad next to Wi-Fi in settings shows I'm connected but at the top left of the screen there is no connection icon and I cannot load and display web pages. My Ipad is about three weeks old and I have never had this problem before. I have rebooted but this did not solve my problem.
Any ideas?

iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Export for web doesn't work (X and 7).

I use the export for web feature a lot. I find that I have to bounce back and forth between Quicktime 7 and X because sometime this feature will work and sometimes it doesn't. There's no consistent reason I can figure out why the applications will or will not work properly. On some occasions I get some small 8Kb file. On other occasions, I only get the audio.
Any ideas?

Uhh, the system requirements for Photoshop CC state you need 2 GB RAM, 8 GB recommended. This is likely your problem.
Benjamin

FCP 7 exporting for DVD, Image problems

Hey,
New here so sorry if I'm a little slow with everything. We shot some concert footage using 4 cameras, 3 cameras shot in 1440X1080 HDV 1080i60 and the other camera shot in AVCHD but was imported as 1440X1080 ProRes 422. I edited the video in a sequence with settings of 1440X1080, field dominance of Upper (odd), and compressor HDV 1080i60. I was trying to find a way to export for SD DVD in the best quality I could and found Ken Stone's site,
http://www.kenstone.net/fcp_homepage/hdv_timeline_to_sd_dvd.html
It's worked for me on other projects. This project is a 2 1/2 hour DVD, so I tested that method on a minute of the footage and it didn't come out well just for one camera. I followed Ken Stone's page and took the sequence and changed the settings to field dominance None, and compressor to ProRes 422. Then I exported using quicktime conversion with settings of ProRes 422 HQ. Once that file is exported I've been taking it to Compressor and using either DVD Best 90 Minutes or 120 Minutes. On the max bitrate I don't go above 7.9 and on the average I'm usually around 6.7 for Best 90 minutes and 5.2 for Best 120 minutes. Whenever I put the footage in DVD Studio Pro, the footage from the 3 cameras shot in 1080i60 look great but the footage originally shot in AVCHD has all sorts of lines and distortion on movement. I'm just trying to find out if there is a better way for me to take my footage from final cut to SD DVD and still get good looking footage out of the original AVCHD footage. I don't really understand why the footage from the AVCDD footage is coming out like that since it was imported as ProRes 422. Any ideas on how to fix this?
Thanks,
Matt

Thanks a lot, this did the trick.
Yeah I'm doing a dual layer dvd, but I'm sending it off for replication so from what I've read it sounds like I have to build and format the dvd, then burn each Layer to it's own dvd. Do you have any experience with this? The break point is kind of confusing me right now because it sounds like just a lot of trial and error.
Thanks again
Matt

[Solved] Slow resizing for some apps under KDE4.

I use KDE4 (with the default theme) and Radeon graphic card (free driver). My problem is that the resizing of some windows is really slow. The problem does not appear with the KDE QT applications, but mostly for some old apps. Claws-mail is particularly affected. I do not think it is really a driver problem because claws-mail is unaffected in other window manager (as the default one in Ubuntu, with the same driver) as well in more primitive window managers like icewm. Moreover, native KDE4 QT apps behave properly.
It seems that modern Qt apps redraw approximatively while the resizing and do a final, complete redraw when it is finished, so it is smooth. Claws-mail redraw every time and it's not smooth. However, with other window managers, claws-mail does not redraw at all while the resizing and redraw one time at the end which is less visually appealing, but nevertheless smooth (it was probably the old method); for some reason it redraw every time while the resizing in KDE4.
I am only guessing and have not been able to find a proper documentation nor any fix. Anyone can point me in the right direction?
Last edited by olive (2014-09-24 18:11:59)

I reply to my own post. The culprit was the oxygen GTK theme under KDE. Under KDE, change it to Raleigh with System Setting -> Application Appearance -> GTK and the problem is solved. I had a problem with bluegriffon (from the AUR) that crashes. It was suggested here that the oxygen GTK theme was the culprit: https://groups.google.com/forum/#!topic … Xb92OyWNj8 . Indeed, after changing the theme, no more crash, and as no more problem with resizing windows!. Strange bugs though, I would have thought of everything but the GTK theme ?!?

Emergency questions exporting for dvd studio pro (ntsc and pal)

Hi,
I'm under a tight timeline and would appreciate any help possible. I'm experimenting with outputs/burning today so the real thing can happen tomorrow.
I have an hour long project that was shot on two different kinds of cams -- a sony hdv V1U and pan dvx100b. The first shot mostly in 16:9, the second squeeze 24p. We imported all footage as non-hd though, because the V1u has had problems syncing properly with hd settings with final cut. The issue/question now is this-
I don't know what file format (I'm assuming mpeg-4 for DVD studio pro, but using compressor or no?) or settings to use -- I'm used to mpeg-4, but for some reason it is coming out all grainy/pixelated and I'm not sure if I need to adjust the settings. Also, once exported into a usable/high quality format, I need to burn a ntsc dvd but also a pal dvd -- I've burned pal dvds on dvd studio pro before and know adjusting the settings is just in preferences, but I'm assuming the video will need to be converted into a different kind of file. Or no?
My sequence settings are 1440x1080 (16:9), quicktime video settings compressor hdv 1080i60. When I export as a quicktime file the conversion is great and no problems, but that isn't workable in dvd studio pro.
I would appreciate any advice you could offer,
Thank you,
Tenzin

Thank you, I'm trying that -- someone else just mentioned it needing to be an mpeg 2 file as well. The trouble I'm having now in compressor is it isn't converting when I press submit -- nothing is showing up in the batch monitor. I've tried this directly exporting from fcp using compressor, as well exporting quicktime from fcp and then using the quicktime file in compressor.
I'm not used to using compressor so I'm thinking I am not doing something properly in this process? Thank you for the suggestions, they are reassuring. Do you know if the same file produced by compressor can be used for the pal dvd?

Export for Acro X1 to powerpoint

Hi, I have an indesign CS6 file which needs to be used for powerpoint. I can save to pdf and export to powerpoint which is great. But for some reason the document size has extended and some of the pages have rotated (very odd).
Has anyone had problems exporting to powerpoint from Acrobat

I've got a client or two like that-- pc all the way and totally paranoid about a QT installation.
At first, we used to export an mp1 from compressor at best quality and they'd drop that into ppt. I originally bought flip4mac to do little e-mailable roughcuts, but with a little experimentation, found a wonderful 640x480 1400K cbr wmv export that totally blows their minds for the size/quality issue.
Flip4 mac is a terrific investment for those of us who have to deliver for the windows world.

Question about file size when using "Export for Web"

Hi!
I created a .mov file and worked to get a great balance between file size and quality so that I could deliver it via the web and make it easier for end users to see the video on a slower connection.
My question: When I use "Export for Web," my .mov file is converted into a very large .m4v file--more than double the size of the original file. I know that this export option is to optimize the file for a wide variety of users/internet speeds. Am I correct in guessing that the end size is not an issue? I would post the .mov file instead, but I really like the option of embedding into a html page along with the "click to play" option.
Bottom line--is it better to post the smaller .mov file that i originally started with or to go ahead and link to the bigger .m4v file that was created with the "Export for Web" option?

"Export for Web" is a feature of QuickTime Pro and it makes 4 files and the html page code for easy copy/paste Web page editing.
The very first file is called a "reference movie" and it links to the other 3 files (56kbps, 900kbps and 1.5Mbps). It, and the page code, "read" the connection speed of the viewing hardware and "serve up" the correct file based on that connection speed.
In nearly all cases the "Desktop" version would still be smaller in file size than the original source. The times the file would "increase" in file size would be when an already compressed was used as the source file. You can find out more about your source file by opening it in QuickTime Player and viewing the Movie Inspector window information.
There are dozens of other html "tricks" that could be used if your source file is already compressed but you want a different display size:
Page code to show "aspect" or scale="tofit". This code allows values "outside" of those found in the actual QuickTime file be used for the Web page display. A 320X240 QuickTime .mov file looks pretty good at double size (640X480) but the file size would still be that of the source file.
"Poster Movie" is another html trick that loads the Web based file directly in the QuickTime Player application (bypassing Web page layout restrictions). These files are also known as "Presentation Movies".
Another method is the QuickTime Media Link file (.qtl). These are simple text based files that are used as a "direct link". These use simple XML (Extensible Markup Language) and are easily created in any text editing application. The simple syntax has amazing control over a simple QuickTime .mov file. You can launch (and quit) the QuickTime Player, display at other dimensions and even embed "links" inside the display.
Some of my files as examples:
http://homepage.mac.com/kkirkster/Lemon_Trees/ a "Poster Movie" style.
http://homepage.mac.com/kkirkster/.Public/RedneckTexasChristmas.qtl
A QuickTime Media Link file. A tiny file should download to the viewing machine, launch QuickTime Player, present the movie and it even includes a "link" to my Web page.
Edit: It appears you must now double click the .qtl download to launch QuickTime.

Slow export for no reason

Similar Messages

Maybe you are looking for