Slow Finder After Statrup
Since the 10.6.2 update, when I do a reastart or cold startup on my 13" MacBook Pro, everything looks normal, desktop appears, menu bar with Finder appears, but then for 2 or 3 minutes, I can't do anything. I keep my Dock, hidden, and it won't slide out. I can't get any menus, can't do anything in Finder windows. After the delay, all it normal. It seems to know the last click I made during the freeze. If I clicked on a menu, when the freeze ends that menu will drop down. It's consistent and repeatable every time I reboot. A slightly older but similar MacBook 13" with all the same software does not have this problem.
I've tried deleting the Finder plist, resetting PRAM, repairing permissions, verified with Disk Utility (no problems), booting in safe mode, booting with all peripherals disconnected. No help, same delay. Any ideas?
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.
Similar Messages
-
2 finger scroll doesnt work in Finder after Mavericks update. Macbook pro seems slow and less responsive after the update.
nateshns wrote:
2 finger scroll doesnt work in Finder after Mavericks update.
In any particular app, or all of them? -
System Slow-Down After Printing
I recently installed Mountain Lion. Over the last couple of weeks I have noticed a significant operating system (10.8.2) slow down after printing with my Epson R3000 printer. This happens after every printing session. When I say slow-down I mean significant delays and dreading "beachballs" when opening applications, selecting menu items or anything else I should choose to do. I'm left with re-starting the computer to get going normally again.After re-atarting I have gone to "verify permissions" and I get approx "5" pages of permission errors, all associated with the printer library in some fashion or another. I then repair all those permissions and re-start my MacPro. The operating system then works as normal and I can use the computer with no problems (until I start printing again). I mainly use the computer for photo editing with Adobe Photoshop CS6, Adobe Lightroom 4 and Aperture 3.2.
I did not have this problem before upgrading to Mountain Lion (and then to 10.8.2). I did not get "significant" permission errors before upgrading. Since all printer drivers for this printer are handled now by Apple via the "new" Software Update process I can't even re-download the Epson printer driver and start over. I'm completely at a loss as to what, associated with the printer function, is causing these "significant" permission errors and subsequent operating system slow down. My printer is almost brand new and was working flawlessly before Mountain Lion. Let me be clear though, I can print fine. My problem is the system slow down after using the print function which I am only guessing has something to do with the "5" pages of permission errors after printting photos (with CS6/Lightroom/Aperture).
Incidently, I am not in any way a computer expert. Verifying and repairing permissions is about all I know how to do that's why I need help. I also just thought I would try the forums first before going to technical support to see what people thought about this.
Again, I repair the permission errors, re-start my system and all is fine. Any further suggestions would be deeply appreciated.When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting. -
Mac slow down after Mavericks installation
I have realized that I am not the first with the same problem after the installation of Mavericks.
I run etrecheck as have been already advised many users.
Below are the results.
Can you please help me further? My mac is really slow. Applications, like email quit unexpectadly.
Thank you in advance.
Hardware Information:
MacBook Pro (13-inch, Early 2011)
MacBook Pro - model: MacBookPro8,1
1 2.3 GHz Intel Core i5 CPU: 2 cores
4 GB RAM
Video Information:
Intel HD Graphics 3000 - VRAM: 384 MB
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 1.9 - SDK 10.9
AppleAVBAudio: Version: 2.0.0 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
System Software:
OS X 10.9.1 (13B42) - Uptime: 1 day 1:57:8
Disk Information:
Hitachi HTS545032B9A302 disk0 : (320.07 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) /: 319.21 GB (34.86 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-898
USB Information:
Seagate Backup+ RD 1 TB
Gavrilos' III back up (disk1s1) /Volumes/Gavrilos' III back up: 500.24 GB (237.88 GB free)
Other files (disk1s2) /Volumes/Other files: 499.97 GB (159.86 GB free)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. FaceTime HD Camera (Built-in)
Lexmark International Lexmark E340
Apple Computer, Inc. IR Receiver
FireWire Information:
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Kernel Extensions:
com.rim.driver.BlackBerryUSBDriverInt (0.0.67)
com.seagate.driver.PowSecDriverCore (5.2.4 - SDK 10.4)
com.seagate.driver.PowSecLeafDriver_10_5 (5.2.4 - SDK 10.5)
Problem System Launch Daemons:
[failed] com.apple.softwareupdated.plist
[failed] com.apple.wdhelper.plist
Problem System Launch Agents:
Launch Daemons:
[loaded] com.adobe.fpsaud.plist
[loaded] com.adobe.SwitchBoard.plist
[invalid] com.bjango.istatmenusdaemon.plist
[loaded] com.google.keystone.daemon.plist
[loaded] com.macpaw.CleanMyMac2.Agent.plist
[loaded] com.microsoft.office.licensing.helper.plist
[loaded] com.oracle.java.Helper-Tool.plist
[not loaded] com.teamviewer.teamviewer_service.plist
Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist
[loaded] com.adobe.CS5ServiceManager.plist
[loaded] com.bjango.istatmenusagent.plist
[loaded] com.divx.dms.agent.plist
[loaded] com.divx.update.agent.plist
[loaded] com.google.keystone.agent.plist
[loaded] com.oracle.java.Java-Updater.plist
[not loaded] com.teamviewer.teamviewer.plist
[not loaded] com.teamviewer.teamviewer_desktop.plist
[loaded] de.novamedia.VodafoneDeviceObserver.plist
User Launch Agents:
[loaded] com.adobe.ARM.[...].plist
[loaded] com.adobe.ARM.[...].plist
[failed] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist
[failed] com.macpaw.CleanMyMac2Helper.scheduledScan.plist
[failed] com.macpaw.CleanMyMac2Helper.trashWatcher.plist
[loaded] com.spotify.webhelper.plist
[loaded] com.yourcompany.HSPA_USB_MODEM.plist
User Login Items:
Citations
AppTrap
Mail
Skype
iTunesHelper
Dropbox
Safari
AdobeResourceSynchronizer
Calendar
KiesViaWiFiAgent
fuspredownloader
3rd Party Preference Panes:
AppTrap
Flash Player
Java
MacFUSE
Paragon NTFS for Mac ® OS X
Internet Plug-ins::
o1dbrowserplugin: Version: 4.9.1.16010
OVSHelper: Version: 1.1
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 2.3.8.1
AdobePDFViewerNPAPI: Version: 11.0.04 - SDK 10.6
FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6
DivX Web Player: Version: 3.0.1.5 - SDK 10.5
Silverlight: Version: 5.1.10411.0 - SDK 10.6
Flash Player: Version: 11.9.900.170 - SDK 10.6
iPhotoPhotocast: Version: 7.0 - SDK 10.8
googletalkbrowserplugin: Version: 4.9.1.16010
NP_2020Player_IKEA: Version: 5.0.94.1 - SDK 10.6
AdobePDFViewer: Version: 11.0.04 - SDK 10.6
npgtpo3dautoplugin: Version: 0.1.44.29 - SDK 10.5
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6
JavaAppletPlugin: Version: Java 7 Update 45
User Internet Plug-ins::
Picasa: Version: 1.0 - SDK 10.4
Google Earth Web Plug-in: Version: 7.1
Bad Fonts:
None
Old applications:
None
Time Machine:
Skip System Files: NO
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 297.29 GB Disk used: 264.82 GB
Destinations:
Gavrilos' III back up [Local] (Last used)
Total size: 465.88 GB
Total number of backups: 7
Oldest backup: 2013-12-03 22:42:27 +0000
Last backup: 2013-12-17 06:16:17 +0000
Size of backup disk: Too small
Backup size 465.88 GB < (Disk used 264.82 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
10% PluginProcess
5% coreaudiod
4% Mail
4% WindowServer
3% Safari
Top Processes by Memory:
140 MB Safari
108 MB Mail
82 MB Finder
72 MB com.apple.WebKit.WebContent
53 MB Skype
Virtual Memory Statistics:
27 MB Free RAM
936 MB Active RAM
915 MB Inactive RAM
1.01 GB Wired RAM
6.01 GB Page-ins
517 MB Page-outsYou have been up for ~17 days, and you have 1.72GB of pageouts. That averages out to one page every 3 seconds, and we will assume you re not working 24/7, so when you are using your Mac you are spending a lot of time paging to disk. Disks are slow.
As Kappy says, you are either concurrently running too may RAM hungry apps, or you have some apps that really want lots of RAM and you are running them a lot day after day. Either "Stop That!", or get more RAM.
You could also consider a Solid State Disk, but that is not as good as having real RAM and would be more expensive than RAM unless you Mac is max'ed out on RAM. Of course you could do both. More RAM and an SSD
If you want to see the paging for yourself, start an Applications -> Utilities -> Terminal session, and run the command:
sar -g 60 100
which will report the pageout stats every minute for 100 minutes (adjust the numbers to suit your tastes).
Now use your Mac as your normally would, including the times when it is running slow. After you have experienced the slowness, go back and look at the 'sar' output. If you have mostly zeros with maybe a trivial blip every once in awhile, that is noise and not a paging issue. If you have some high numbers, then you are paging heavily at that time. If you have sustained paging, even if small value, it is going to affect your performance. High numbers will affect your performance even more. -
System slow down after lion update 8/18/11
Has anyone else had a problem with their system slowing down after downloading the system update for Lion on 8/18? My system is not nearly as responsive and is only about two weeks old and have not installed any software other than Microsoft Office 2011 when I bought the machine. Any ideas?
Ok my system is booting and shutting down faster now.. This method worked for me:
First, I repaired the permissions:
1) Open up Disk Utility
2) Select your hard drive
3) Now select Repair Disk Permissions.
Then, I deleted the caches folder:
1) From the Finder's Go menu, select Go To Folder, and go to this folder: /Library
2) Delete everything inside the Caches folder (This might require the Admin Username & Password)
Finally, go to System Preferences and click on Startup Disc then click on your boot drive (In my case I've selected my HD labeled "Macintosh HD Mac OS X, 10.7.1". Now do a restart by clicking on the Restart button. If you don't have a Startup drive selected your mac will waste time at boot searching for a suitable boot drive !
I Hope this works for you as well.
Cheers! -
System slow down after upgrade to 10.10.2
Still have a slow down after updating to 10.10.2
Tried everything I can think of.
Get spinning color wheel for a long time when opening even small files. Scrolling through folders, cursor hangs for a moment. opening and saving takes much longer.
Used HD repair and repaired permissions and diagnosed HD. No problems.
Looking at Activity Monitor, I don't see anything that stand out-
-CWhen you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting. -
Very slow internet after Mavericks update. Opening websites very slow. Console info here. 9/25/14 11:12:51.416 AM com.apple.launchd[1]: (com.apple.qtkitserver[22059]) Could not terminate job: 3: No such process 9/25/14 11:12:51.416 AM com.apple.launc
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
Hi my MAC has slowed considerably after yosemite, is this normal? It is very slow
I saw that it is advisable to use etrecheck and post it here I hope this helps any kind expert out there give me some clue to speed it up
Problem description:
Since install yosemite the mac has slowed down so I wish I could roll back
EtreCheck version: 2.0.11 (98)
Report generated 28 November 2014 10:16:09 am AEDT
Hardware Information: ℹ️
MacBook Pro (13-inch, Late 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.4 GHz Intel Core i5 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 4 days 12:28:31
Disk Information: ℹ️
Hitachi HTS545050B9A302 disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / [Startup]: 498.88 GB (259.36 GB free)
Core Storage: disk0s2 499.25 GB Online
MATSHITADVD-R UJ-8A8
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/MyExpatNet.app
[not loaded] net.tunnelblick.tap (1.0) Support
[not loaded] net.tunnelblick.tun (1.0) Support
/System/Library/Extensions
[not loaded] com.Belcarra.iokit.USBLAN_netpart (3.1.1 - SDK 10.6) Support
[not loaded] com.Belcarra.iokit.USBLAN_usbpart (3.1.1 - SDK 10.6) Support
[not loaded] com.RemoteControl.USBLAN.usbpart (3.1.1 - SDK 10.7) Support
[not loaded] com.ZTE.driver.ZTELTEUSBCDCACMData (5.0.1) Support
[not loaded] com.ZTE.driver.ZTELTEUSBMassStorageFilter (5.0.1) Support
[not loaded] com.ZTE.driver.ZTEUSBCDCACMData (1.3.12) Support
[not loaded] com.ZTE.driver.ZTEUSBMassStorageFilter (1.3.12) Support
[loaded] com.eltima.SyncMate.kext (0.2.5b15) Support
[not loaded] com.seagate.driver.PowSecDriverCore (5.2.6 - SDK 10.4) Support
[not loaded] com.sierrawireless.driver.SierraDIPSupport (1.0.0) Support
[not loaded] com.sierrawireless.driver.SierraFSRSupport (3.0.0) Support
[not loaded] com.sierrawireless.driver.SierraHSRSupport (3.0.0) Support
[not loaded] com.sierrawireless.driver.SierraIPDirect (1.1.5) Support
[loaded] com.silex.driver.sxuptp (1.5.1) Support
[not loaded] com.zte.LTEdriver.cdc_ecm_qmi (1.0.2) Support
[not loaded] com.zte.LTEdriver.cdc_usb_bus (1.0.2) Support
/System/Library/Extensions/2.2.0/Belcarra.USBLAN_netpart.kext/Contents/Plug-Ins
[not loaded] com.belcarra.iokit.netpart.panther (1.6.3) Support
/System/Library/Extensions/2.2.0/Belcarra.USBLAN_usbpart.kext/Contents/Plug-Ins
[not loaded] com.belcarra.iokit.usbpart.panther (1.6.3) Support
/System/Library/Extensions/2.2.0/RemoteControl.USBLAN_usbpart.kext/Contents/Plu g-Ins
[not loaded] com.RemoteControl.USBLAN.panther (1.6.2) Support
/System/Library/Extensions/Seagate Storage Driver.kext/Contents/PlugIns
[not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.2.6 - SDK 10.4) Support
[not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.2.6 - SDK 10.5) Support
[not loaded] com.seagate.driver.SeagateDriveIcons (5.2.6 - SDK 10.4) Support
Problem System Launch Daemons: ℹ️
[running] BkBackupScheduler.plist Support
[running] com.seagate.TBDecorator.plist Support
Launch Agents: ℹ️
[running] com.Affinegy.InstaLANa.plist Support
[loaded] com.google.keystone.agent.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[running] com.sierrawireless.SwitchTool.plist Support
[running] syncmateStarter.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.google.keystone.daemon.plist Support
[running] com.iobit.AMCDaemon.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[invalid?] com.purenetworks.AgentDaemon.plist Support
[running] rapiback.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
[running] com.iobit.MacBoosterMini.plist Support
[failed] com.iskysoft.TunesOverWatchDemo.plist Support
[running] com.microsoft.LaunchAgent.SyncServicesAgent.plist Support
User Login Items: ℹ️
Box Sync Application (/Applications/Box Sync.app)
Garmin Express Service Application (/Applications/Garmin Express.app/Contents/Library/LoginItems/Garmin Express Service.app)
Microsoft Database Daemon Application (/Applications/Microsoft Office 2011/Office/Microsoft Database Daemon.app)
Yahoo! Messenger Application (/Applications/Yahoo! Messenger.app)
AdobeResourceSynchronizer ApplicationHidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
MailTab for Gmail Application (/Applications/MailTab for Gmail.app)
Mail Application (/Applications/Mail.app)
Google Chrome Canary ApplicationHidden (/Applications/Google Chrome Canary.app)
Google Chrome UNKNOWNHidden (missing value)
Internet Plug-ins: ℹ️
LogitechHarmony: Version: 1.2.0.2 - SDK 10.7 Support
o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 Support
Default Browser: Version: 600 - SDK 10.10
net.juniper.DSSafariExtensions: Version: (null) Support
AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
FlashPlayer-10.6: Version: 15.0.0.239 - SDK 10.6 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
Flash Player: Version: 15.0.0.239 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 Support
SharePointBrowserPlugin: Version: 14.3.0 - SDK 10.6 Support
AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
GarminGpsControl: Version: 4.2.0.0 - SDK 10.8 Support
JavaAppletPlugin: Version: Java 7 Update 71 Check version
User Internet Plug-ins: ℹ️
Picasa: Version: 1.0 Support
WebEx64: Version: 1.0 - SDK 10.6 Support
3rd Party Preference Panes: ℹ️
Flash Player Support
Java Support
MacFUSE (Tuxera) Support
Perian Support
Seagate Dashboard for Mac OSX Support
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 498.88 GB Disk used: 239.51 GB
Destinations:
SEAGATE BAC [Local]
Total size: 999.86 GB
Total number of backups: 19
Oldest backup: 2014-11-06 04:17:26 +0000
Last backup: 2014-11-25 02:42:12 +0000
Size of backup disk: Adequate
Backup size 999.86 GB > (Disk used 239.51 GB X 3)
Top Processes by CPU: ℹ️
7% mtmd
6% WindowServer
2% Box Sync Monitor
2% Box Sync
1% mds_stores
Top Processes by Memory: ℹ️
219 MB MenuTab for Facebook
168 MB MailTab for Gmail
107 MB Finder
92 MB com.apple.WebKit.WebContent
69 MB Calendar
Virtual Memory Information: ℹ️
67 MB Free RAM
1.26 GB Active RAM
1.21 GB Inactive RAM
1.12 GB Wired RAM
35.38 GB Page-ins
906 MB Page-outsPlease describe the problem in as much relevant detail as possible. The "etrecheck" fad hasn't made that step any less necessary. The better your description, the better the chance of a solution. The results of posting etrecheck output on this site without a full description of the problem are very poor.
For example, if the computer is slow, which specific actions are slow? Is it slow all the time, or only sometimes? What other changes did you make, if any, just before it became slow? Have you seen any alerts or error messages? Have you done anything to try to fix it? Most importantly, do you have a current backup of all data? If the answer to the last question is "no," back up now. Ask if you need guidance. Do nothing else until you have a backup. -
Slow requests after swapping staging and production slots
Hi!
I'm sometimes experiencing an issue where swapping staging and production slots creates a first slow request on the production (and sometimes on the staging) URL. I thought the whole point of staged deployments were to eliminate slow requests after deployment.
When creating a simple Hello World Website a normal load time for the website could be 100ms, but after swapping it sometimes increases to over a second.
I also tested this with a bit more complex websites and the first request after swapping sometimes exceeds ten seconds, which I find unacceptable.
I am measuring the request times with my browser throughout the swapping process. The websites I tested this with were Standard Websites which had Always-On enabled. The staging slot was called before swapping.
Am I doing something wrong? Why are first requests sometimes so slow? Or is this normal behavior?
Thanks in advance for an answer!I'm still able to reproduce the issue.
I just created a new Website (Web App) with the name swaptest and a staging slot named staging. Then I created a git repository in the staging slot and this is the repo I am always pushing to.
After that, I created a basic node.js Express app via the generator and pushed it towards the staging slot. After I loaded the site successfully on the staging slot (which sometimes takes a few seconds, but is fine since this is the warm up) I swap the slots
via the new portal. Most of my swaps were fine, however one of the swaps was slow again. See the screenshot for a very long request time (9 seconds). I already loaded the page once on the staging slot, so it should have been warmed up already.
Screenshot: http://i.imgur.com/HXfDJr8.png
Website: http://swaptest.azurewebsites.net/
Staging: http://swaptest-staging.azurewebsites.net/
Timeframe: Within the last 30 minutes.
Please let me know if you need more information,
Thanks,
Peter. -
Slow finder start up at airport card boot
Hi,
For some reason my macbook pro 17" is extremely slow at start-up, when it gets to the part where it's loading the airport and battery icon (after logging in as a user). Any internet related applications (ichat, safari, entourage) are also slow to start if I try it soon after booting up. I'm also having problems connecting to the internet via the airport. The signal is at full strength, but there is no internet connection. This was all working the day before yesterday, and when I plug in directly to the cable internet connection via ethernet, the internet works.
One other catch is that I'm in a foreign country and don't have any startup CDs/DVDs with me, and it would be cost-prohibitive for me to call applecare (which I'd really like to do!). Also couldn't figure out how to contact applecare via ichat (there are still some luddites among us, apologies). Any and all advice would be greatly appreciated.
Thanks.
Macbook Pro 17"
MacbookPro 1,2
Intel Core Duo
2.16 Ghz processor
Memory: 2 ghz
bus speed: 667 Mhz
Wireless connection via: D-link, airplus G, 2.4 ghz to cable modem
I've tried the following:
SLOW FINDER:
Repair disk permissions - didn't seem to do much
Switching user accounts - same slowness with my other account
Downloading 10.4.9 update - problems downloading, says it sent the file to the trash and I can retrieve it and try again. Did that, but it didn't work.
Resetting PRAM at start up
AIRPORT:
downloaded software updates
tried plugging directly into internet connection, and that works fine.
Read something about reseating the airport card but can't find instructions on how to do it for a Macbook Pro 17".
Macbook Pro 17"
2.16 Ghz Intel Core Duo
2 GB Mhz DDR2 SDRam
2ghz Memory
Bus Speed 667 Mhz
Boot Rom Version: MBP12.0061.B03
10.4.8 TigerYou should never let your hard drive get less than 15% empty. This number is an arbitrary number that most have found to be the maximum you can have and still have a relatively smooth riding system. That may not directly affect wireless internet, but the speed of caching for the browser gets harder as it has lack of space to write to when it gets too full. The speed of startup is also affected as caches are written when the startup happens.
-
Slow finder start up, Airport problems
Hi,
For some reason my macbook pro 17" is extremely slow at start-up, when it gets to the part where it's loading the airport and battery icon (after logging in as a user). Any internet related applications (ichat, safari, entourage) are also slow to start if I try it soon after booting up. I'm also having problems connecting to the internet via the airport. The signal is at full strength, but there is no internet connection. This was all working the day before yesterday, and when I plug in directly to the cable internet connection via ethernet, the internet works.
One other catch is that I'm in a foreign country and don't have any startup CDs/DVDs with me, and it would be cost-prohibitive for me to call applecare (which I'd really like to do!). Also couldn't figure out how to contact applecare via ichat (there are still some luddites among us, apologies). Any and all advice would be greatly appreciated.
Thanks.
Macbook Pro 17"
MacbookPro 1,2
Intel Core Duo
2.16 Ghz processor
Memory: 2 ghz
bus speed: 667 Mhz
Wireless connection via: D-link, airplus G, 2.4 ghz to cable modem
I've tried the following:
SLOW FINDER:
Repair disk permissions - didn't seem to do much
Switching user accounts - same slowness with my other account
Downloading 10.4.9 update - problems downloading, says it sent the file to the trash and I can retrieve it and try again. Did that, but it didn't work.
Resetting PRAM at start up
AIRPORT:
downloaded software updates
tried plugging directly into internet connection, and that works fine.
Read something about reseating the airport card but can't find instructions on how to do it for a Macbook Pro 17".
Macbook Pro 17"
2.16 Ghz Intel Core Duo
2 GB Mhz DDR2 SDRam
2ghz Memory
Bus Speed 667 Mhz
Boot Rom Version: MBP12.0061.B03
10.4.8 Tiger
macbook pro 17" Mac OS X (10.4.8)You should never let your hard drive get less than 15% empty. This number is an arbitrary number that most have found to be the maximum you can have and still have a relatively smooth riding system. That may not directly affect wireless internet, but the speed of caching for the browser gets harder as it has lack of space to write to when it gets too full. The speed of startup is also affected as caches are written when the startup happens.
-
Suddenly my iBook G4 after booting slows down when launching the Finder.
It takes as long as 5 minutes to see the desktop, icons, dock, etc.
I've tried repairing permissions and cleaned manually the caches with no results. Then I used TinkerTool 3.5 to erase the .DS Store file on the desktop
( I assumed that may be this was the corrupted file ) and again the same slow down after re-boot.
Any ideas?This seemed the cause of the slow down. I'll left it off as you suggested.
When I go to the nearest mall to my home I have access for free on my laptop. That's why I forgot to turn it off.
Wi-Fi is starting to grow in my country. Not only is available for free at some malls but on some restaurants and buildings. And since wireless routers are getting more and more cheap, people in their houses are building their wi-fi networks.
Thanks a lot -
Why are both my Mac's so slow now after upgrading to Mavericks?
I have 2 Macs, an MB Pro Core i5, & Mac Mini Mid 2010 Core 2 Duo, (both 4/320's) and both have remained significantly slower, even after indexing, unless indexing takes days upon days. I understand why the Mini may have taken a speed dip, but a Core i5 unit too?
The upgrade was done over a dysfunctional system. Do this:
Fixing a Mavericks Installation Problem
How to manage a failed OS X Mavericks installation | MacFixIt - CNET Reviews.
Re-download and reinstall Mavericks.
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion/Mavericks: Select Reinstall Lion/Mountain Lion/Mavericks and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
Error in finder after install osx mavericks
error in finder after install osx mavericks
I have a similar problem but the error code that keeps coming up is -600 please help !
-
Mac Pro slow down after Yosemite 10.10.2 upgrade
Upgraded in January.
I get the spinning color wheel all the time. Programs crash.
I've run adware medic a few times, and etrecheck.
First run through, adware found Genio.
Since then, it hasn't. Etrecheck still says it sees it, but Adware doesn't. Still no good.
I reset SMS and PRAM.
This machine is slow. Previous to the upgrade, this machine was very fast!
Etrecheck report:
Hardware Overview:
Model Name: Mac Pro
Model Identifier: MacPro5,1
Processor Name: Quad-Core Intel Xeon
Processor Speed: 2.4 GHz
Number of Processors: 2
Total Number of Cores: 8
L2 Cache (per Core): 256 KB
L3 Cache (per Processor): 12 MB
Memory: 20 GB
Processor Interconnect Speed: 5.86 GT/s
Boot ROM Version: MP51.007F.B03
SMC Version (system): 1.39f11
SMC Version (processor tray): 1.39f11
Serial Number (system): YM12403QEUF
Serial Number (processor tray): J512102JZBH8C
Hardware UUID: 331ADEF9-7672-54D4-B314-6CC9510F23F1
EtreCheck version: 2.1.8 (121)
Report generated March 26, 2015 at 2:21:54 PM CDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Click the [Adware! - Remove] links for help removing adware.
Hardware Information: ℹ️
Mac Pro (Mid 2010) (Technical Specifications)
Mac Pro - model: MacPro5,1
2 2.4 GHz Quad-Core Intel Xeon CPU: 8-core
20 GB RAM Upgradeable
DIMM 1
4 GB DDR3 ECC 1066 MHz ok
DIMM 2
4 GB DDR3 ECC 1066 MHz ok
DIMM 3
1 GB DDR3 ECC 1066 MHz ok
DIMM 4
1 GB DDR3 ECC 1066 MHz ok
DIMM 5
4 GB DDR3 ECC 1066 MHz ok
DIMM 6
4 GB DDR3 ECC 1066 MHz ok
DIMM 7
1 GB DDR3 ECC 1066 MHz ok
DIMM 8
1 GB DDR3 ECC 1066 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en2: 802.11 a/b/g/n
Video Information: ℹ️
ATI Radeon HD 5770 - VRAM: 1024 MB
HP 2711 1920 x 1080 @ 60 Hz
HP 2711 1920 x 1080 @ 60 Hz
System Software: ℹ️
OS X 10.10.2 (14C1514) - Time since boot: 4:30:37
Disk Information: ℹ️
HL-DT-ST DVD-RW GH61N
WDC WD1001FALS-41Y6A1 disk0 : (1 TB)
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 999.35 GB (365.24 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
Seagate FreeAgent GoFlex 1.5 TB
disk1s1 (disk1s1) <not mounted> : 32 KB
Flux Capacitor (disk1s3) /Volumes/Flux Capacitor : 1.50 TB (880.50 GB free)
EPSON EPSON Perfection V37/V370
Logitech USB Receiver
Apple, Inc. Keyboard Hub
Apple, Inc Apple Keyboard
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Gatekeeper: ℹ️
Mac App Store and identified developers
Adware: ℹ️
Geneio [Adware! - Remove]
Kernel Extensions: ℹ️
/System/Library/Extensions
[not loaded] com.keyspan.iokit.usb.KeyspanUSAdriver (2.2) [Click for support]
[not loaded] com.wacom.kext.wacomtablet (6.1.4) [Click for support]
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[running] com.adobe.AdobeCreativeCloud.plist [Click for support]
[running] com.extensis.FMCore.plist [Click for support]
[loaded] com.oracle.java.Java-Updater.plist [Click for support]
[running] com.teamviewer.teamviewer.plist [Click for support]
[running] com.teamviewer.teamviewer_desktop.plist [Click for support]
[running] com.wacom.wacomtablet.plist [Click for support]
[running] jp.co.canon.CUPSCMFP.BG.plist [Click for support]
[running] jp.co.canon.UFR2.BG.plist [Click for support]
Launch Daemons: ℹ️
[running] com.adobe.adobeupdatedaemon.plist [Click for support]
[running] com.adobe.ARM.[...].plist [Click for support]
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.adobe.SwitchBoard.plist [Click for support]
[loaded] com.barebones.authd.plist [Click for support]
[loaded] com.barebones.textwrangler.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[loaded] com.oracle.java.Helper-Tool.plist [Click for support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Click for support]
[loaded] com.teamviewer.Helper.plist [Click for support]
[running] com.teamviewer.teamviewer_service.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.adobe.ARM.[...].plist [Click for support]
[loaded] com.adobe.ARM.[...].plist [Click for support]
[loaded] com.google.keystone.agent.plist [Click for support]
User Login Items: ℹ️
AraxiVolume_HW25512-63_J Volume Hidden (/Volumes/AraxiVolume_HW25512-63_J)
AraxiTemp_HW25512-63_C Volume Hidden (/Volumes/AraxiTemp_HW25512-63_C)
JobNAS Volume Hidden (/Volumes/JobNAS)
Dropbox Application (/Applications/Dropbox.app)
Microsoft Outlook Application (/Applications/Microsoft Office 2011/Microsoft Outlook.app)
Internet Plug-ins: ℹ️
WacomNetscape: Version: 1.1.0-5 [Click for support]
Default Browser: Version: 600 - SDK 10.10
AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 [Click for support]
WacomSafari: Version: 1.1.0-5 [Click for support]
AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 [Click for support]
FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0 - SDK 10.8
SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
JavaAppletPlugin: Version: Java 8 Update 31 Check version
User internet Plug-ins: ℹ️
Unity Web Player: Version: UnityPlayer version 2.6.1f3 [Click for support]
Safari Extensions: ℹ️
AdBlock
Video Converter
WOT
Firebug Lite for Safari
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
Java [Click for support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
12% WindowServer
3% launchd
2% AdobeAcrobat
1% plugin-container
1% hidd
Top Processes by Memory: ℹ️
966 MB firefox
537 MB Adobe Illustrator
494 MB softwareupdated
451 MB Adobe Photoshop CC 2014
301 MB mds_stores
Virtual Memory Information: ℹ️
3.78 GB Free RAM
10.89 GB Active RAM
5.13 GB Inactive RAM
1.65 GB Wired RAM
13.32 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Mar 26, 2015, 02:01:09 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Adobe Illustrator_2015-03-26-140109_[redacted].crash
Mar 26, 2015, 09:57:44 AM /Library/Logs/DiagnosticReports/Microsoft Excel_2015-03-26-095744_[redacted].hang
Mar 26, 2015, 09:57:43 AM /Library/Logs/DiagnosticReports/AdobeAcrobat_2015-03-26-095743_[redacted].hang
Mar 26, 2015, 09:46:15 AM Self test - passed
Mar 26, 2015, 08:02:51 AM /Library/Logs/DiagnosticReports/???_2015-03-26-080251_[redacted].cpu_resource.d iag [Click for details]
Mar 26, 2015, 08:02:13 AM /Library/Logs/DiagnosticReports/???_2015-03-26-080213_[redacted].cpu_resource.d iag [Click for details]
Mar 26, 2015, 08:01:35 AM /Library/Logs/DiagnosticReports/???_2015-03-26-080135_[redacted].cpu_resource.d iag [Click for details]
Mar 26, 2015, 08:00:58 AM /Library/Logs/DiagnosticReports/???_2015-03-26-080058_[redacted].cpu_resource.d iag [Click for details]
Mar 26, 2015, 08:00:20 AM /Library/Logs/DiagnosticReports/???_2015-03-26-080020_[redacted].cpu_resource.d iag [Click for details]
Mar 26, 2015, 07:59:42 AM /Library/Logs/DiagnosticReports/???_2015-03-26-075942_[redacted].cpu_resource.d iag [Click for details]
Mar 26, 2015, 07:59:04 AM /Library/Logs/DiagnosticReports/???_2015-03-26-075904_[redacted].cpu_resource.d iag [Click for details]
Mar 26, 2015, 07:57:45 AM /Library/Logs/DiagnosticReports/???_2015-03-26-075745_[redacted].cpu_resource.d iag [Click for details]
Mar 26, 2015, 07:56:27 AM /Library/Logs/DiagnosticReports/???_2015-03-26-075627_[redacted].cpu_resource.d iag [Click for details]
Mar 26, 2015, 07:54:30 AM /Library/Logs/DiagnosticReports/???_2015-03-26-075430_[redacted].cpu_resource.d iag [Click for details]
Mar 26, 2015, 07:53:11 AM /Library/Logs/DiagnosticReports/???_2015-03-26-075311_[redacted].cpu_resource.d iag [Click for details]
Mar 26, 2015, 07:51:53 AM /Library/Logs/DiagnosticReports/???_2015-03-26-075153_[redacted].cpu_resource.d iag [Click for details]
Mar 26, 2015, 07:51:15 AM /Library/Logs/DiagnosticReports/???_2015-03-26-075115_[redacted].cpu_resource.d iag [Click for details]
Mar 26, 2015, 07:50:37 AM /Library/Logs/DiagnosticReports/???_2015-03-26-075037_[redacted].cpu_resource.d iag [Click for details]
Mar 26, 2015, 07:48:39 AM /Library/Logs/DiagnosticReports/???_2015-03-26-074839_[redacted].cpu_resource.d iag [Click for details]
Mar 26, 2015, 07:48:01 AM /Library/Logs/DiagnosticReports/???_2015-03-26-074801_[redacted].cpu_resource.d iag [Click for details]
Mar 26, 2015, 07:47:22 AM /Library/Logs/DiagnosticReports/???_2015-03-26-074722_[redacted].cpu_resource.d iag [Click for details]
Mar 26, 2015, 07:46:42 AM /Library/Logs/DiagnosticReports/???_2015-03-26-074642_[redacted].cpu_resource.d iag [Click for details]
Mar 26, 2015, 07:40:07 AM /Library/Logs/DiagnosticReports/???_2015-03-26-074007_[redacted].cpu_resource.d iag [Click for details]
Mar 26, 2015, 07:39:29 AM /Library/Logs/DiagnosticReports/???_2015-03-26-073929_[redacted].cpu_resource.d iag [Click for details]
Mar 26, 2015, 07:31:07 AM /Library/Logs/DiagnosticReports/Adobe Photoshop CC 2014_2015-03-26-073107_[redacted].cpu_resource.diag [Click for details]
Mar 26, 2015, 07:18:59 AM /Users/[redacted]/Library/Logs/DiagnosticReports/Adobe Photoshop CC 2014_2015-03-26-071859_[redacted].crash
Mar 26, 2015, 07:08:28 AM /Library/Logs/DiagnosticReports/mdworker32_2015-03-26-070828_[redacted].cpu_res ource.diag [Click for details]
Mar 26, 2015, 06:52:15 AM /Library/Logs/DiagnosticReports/mdworker32_2015-03-26-065215_[redacted].cpu_res ource.diag [Click for details]
Mar 26, 2015, 06:28:11 AM /Library/Logs/DiagnosticReports/mdworker32_2015-03-26-062811_[redacted].cpu_res ource.diag [Click for details]
Mar 26, 2015, 06:27:33 AM /Library/Logs/DiagnosticReports/mdworker32_2015-03-26-062733_[redacted].cpu_res ource.diag [Click for details]
Mar 25, 2015, 09:19:55 AM /Users/[redacted]/Library/Logs/DiagnosticReports/Adobe Illustrator_2015-03-25-091955_[redacted].crash
Mar 25, 2015, 05:40:16 AM /Users/[redacted]/Library/Logs/DiagnosticReports/plugin-container_2015-03-25-05 4016_[redacted].crash
Mar 24, 2015, 10:58:55 AM /Library/Logs/DiagnosticReports/Adobe Illustrator_2015-03-24-105855_[redacted].cpu_resource.diag [Click for details]
Mar 23, 2015, 04:52:41 PM /Library/Logs/DiagnosticReports/Adobe Illustrator_2015-03-23-165241_[redacted].hang
Mar 23, 2015, 04:46:35 PM /Library/Logs/DiagnosticReports/Adobe Illustrator_2015-03-23-164635_[redacted].hang
Mar 23, 2015, 04:45:23 PM /Library/Logs/DiagnosticReports/Adobe Illustrator_2015-03-23-164523_[redacted].cpu_resource.diag [Click for details]
Mar 23, 2015, 03:29:11 PM /Library/Logs/DiagnosticReports/Canon Office Printer Utility_2015-03-23-152911_[redacted].hangMalware – Adware removal – Apple Support
Activity Monitor - Mavericks also Yosemite
Activity Monitor in Mavericks has significant changes
Performance Guide
Why is my computer slow
Why your Mac runs slower than it should
Slow Mac After Mavericks
Things you can do to resolve slowdowns see post by Kappy
Maybe you are looking for
-
TS2972 How do you port forward for Home Sharing ?
I want to home share with my apple tv and it's not working, so i think i need to port forward for home sharing on my apple tv. But i dont know how to port forward :S
-
How to determine who has done a transport in STMS ?
Hello, Is there a table, program or transaction ... which can tell us who has done a transport by STMS in a machine ? In the cofile and data file there is no information .... Thanks. Pedro
-
PSJ LDB in back ground execution
Hi experts, i am using zprogram which uses a submit and return statement and calls PSJ LDB in the called program. The zprogram works fine in foreground but i when i schedule it in background i am getting the below error.. "Fill in all required entry
-
Opening Microsoft Works files in OS X
I have some files that I saved as .wps back when I was a sad little user of Microsoft Works (they didn't even give you Word with a new computer back then, the cheapskates)... I need to open them somehow on my MacBook. Anybody have any ideas for openi
-
Can I get a new charger for free for my MacBook Air
Just a question I think mine broke