Slow Finding Subfolders When Uploading

Not even sure I'm in the correct section, but here's my situation. Recently updated computer to Snow Leopard from Leopard (about a month ago). When attempting to upload a photo to such sites as Facebook or Twitter (or any other site for that matter) it's taking absolutely forever - Approx. 5 minutes or more) for the upload window to see the photos in subfolders. For instance, I'll have a folder on my desktop with additional folders inside of that. Sometimes it takes a while even for the subfolders themselves to show up before I can choose one and then a photo within that subfolder to upload. They always end up showing up, but under Leopard it was almost instantaneous. One the photo is chosen, upload seems to occur without a hitch. Any ideas?

Thanks for the reply --
It's a 2TB drive with almost 900GB currently free. I also have 8GB RAM. I'll often have both Aperture 3 and Photoshop CS3 open but idle. I've checked the Activity Monitor several times during the process -- It's no where near topping out. I'm stumped. Same drive as I was using under Leopard when things were instantaneous.
John

Similar Messages

  • Flickering on finder window when uploading or opening.

    I got my macbook pro 13in in November so it is brand new.I suffered a fall on the ice with my laptop in my backpack.Back pack first a week ago.I have a shell case for it,but am worried something might have happened internally.
    It has been fine up until the past couple days.I began to notice black flickering occurring on my screen.I rebooted and fine.Then today I noticed when uploading things online a strong flickering showed on the finder.So I tried System Preferences > Display and UNCHECK the setting for "Automatically adjust brightness as ambient light changes".This worked on safari,but I went to open up a file in photoshop and the flickering occurred once more.I'm not sure if when dropped something occured or if just some kind of error.Anyone know?

    and I have a macbook pro 13.3 retina and yosemite

  • Intro Movie at slower frame rate when uploaded

    The intro movie I created for my photography site plays too
    slow when uploaded, thus making the music finish long before the
    animation is done; needless to say, this makes for a very tacky
    intro!
    Does anybody know what I'm doing wrong?
    Thanks

    The frame rate is always set to the "prefered" frame rate.
    The actual frame rate depends on the server, the speed and the size
    of the swf file. The best you can do is to fully optomise the
    images before you import them into flash.
    As you are into photography I can understand the need for
    good quality images thefore it is a case of what do you prefer?
    Good images or good speed!

  • Slow Finder startup when not connected to network

    I use a Linksys BEFW11S4 router/WAP for my home network. The Linksys connects my iMac (ethernet), iBook (wireless) and an Airport Express. I decided I would control my son's access to the internet by using the Linksys router software, which is password-protected, to enable or disable the network connection.
    However, I'm finding that when the network connection is disabled, the Finder loads very slowly upon startup. The dock appears fairly quickly, but a color pinwheel spins for a couple of minutes before the Finder menu bar, desktop file and volume icons and any windows I've left opened appear on the desktop. When the network connection is enabled, startup occurs normally . This situation occurs whether I'm on the iMac or the iBook.
    Does anyone know a reason for this behavior?
    iMac G4 17; iBook G4 1.33 Mhz 14; iPod 3G 20GB   Mac OS X (10.3.9)  

    I talked to Linksys technical support, and they told me this behavior was normal. As long as my computers are connected to the router, they will hunt for an Internet connection on startup. (I found this was true even when I physically disconnected my DSL modem from the outer.) It seems that the lengthy delay in getting the Finder loaded is unavoidable in that case. Good work, Jase!
    iMac G4 17; iBook G4 1.33 Mhz 14; iPod 3G 20GB   Mac OS X (10.3.9)  

  • Slow finder Browsing when accessing LAN via VPN connexion

    I am running ML Server, latest upadte on a 2010 Mac Mini Server machine.
    When I am connected to my network from a remote location via VPN, and I try to browse my LAN structure with Finder, it takes ages for the list of folders/files to appear and refresh.
    I have checked my VPN configuration and tried different type (L2TP, PPTP) but nothing significantly differ in term of browsing speed.
    I also appreciate that the network connection at the remote location, as well as the upload speed on my local network can influence the overwal browsing speed... but after several test, I confirm I have more than 3 Mbps bandwith for upload on the local network, and 20 Mbps minimum on the remote location.
    I also tried AFP / SMB, but does not seem to change anything.
    So, I guess I hope the Community has already experienced the issue and some of you guys may have found a workaround to this issue.
    Many thanks.

    why not try cisco ipsec
    Input the following settings:
    Interface: VPN
    VPN Type: Cisco IPSec
    Service Name: This can be anything, I left the default.
    Edit the new interface details as follows:
    Server Address: cisco.vpntraffic.com or other country vpn such as Portugal VPN
    Account Name: Your vpn account
    Password: Your vpn password
    How to setup Mac OS X Built-In Cisco VPN

  • Can't Find Photos When Uploading to Ebay

    When I try to upload photos to ebay or another site, I can't find my photos. If I "browse," then click "applications," then iphoto, all I get is a logo. If I click on the hard drive, then user, then username, then pictures, I only get a few photos. Any ideas? The workaround I do is to move pictures to a folder on the desktop, but this is cumbersome. Thanks,

    mfeatherman
    If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser. Or, if you want to access the files with iPhoto not running, then create a Media Browser using Automator (takes about 10 seconds) or use THIS
    There are three ways (at least) to get files from the iPhoto Window.
    1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
    2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
    3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
    To upload to MySpace or any site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
    This is also true for emailing with Web-based services. If you're using Gmail you can use THIS
    If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
    Also, for 10.5 users: If you use the extended Open or Attach dialogue (with Column View) you can scroll to the bottom of the Shortcuts and find the Media browser there. Select any pic you want from there.
    Regards
    TD

  • Iweb problem - auto creation of subfolders when uploading website

    when i originally uploaded my website the uploads went straight to the url <stgeorges.co.uk>. (done via ftp, don't use mobile me)
    now when i am updating the site, iweb seems to be automatically creating a subfolder to put updates in <stgeorges.co.uk/st_george> whilst retaining the original out of date pages.
    i've had a look through the forums and found one post that seems to imply that this is a symptom rather than a fault of iweb (ie a fault that can't be corrected!)
    can anyone tell me a way to correct or bypass this problem?
    insofar as i'm aware i haven't modified the iweb page in anyway that it would start to do this. it seems iweb i thinking "oh, let me help" when that is not what i want. i have of course modified the index/home page now and i thought it may be separating owing to a duplicate file, when all i want it to do is replace the original!!!
    any help would be most appreciated!!!!

    iWeb creates and publishes an index.html and a folder containing the website files. This is what is uploaded to MobileMe using webdav or to a server using FTP.
    To remove the extra sub directory you need to publish to a local folder and upload the contents of the folder only, rather than the folder itself, using an FTP application.
    This may seem tiresome and unnecessary but, most people who are publishing to a "real" server and purchasing a domain name, probably want their site to be found by search engines and to download faster than the average iWeb built website is capable of.
    Adding SEO tags and optimizing files for faster download requires publishing to a local folder anyway....
    http://www.iwebformusicians.com/SearchEngines/Tools.html
    http://www.iwebformusicians.com/SearchEngines/Optimize.html
    "I may receive some form of compensation, financial or otherwise, from my recommendation or link."

  • Finder crashes when uploading Images to Wordpress and Facebook

    Hi All, 
    This is a bit od a long description, but I wanted it to be specifec and detailed as I've tried a couple of searches through the discussions and none of the other solutions suggested have worked so far. 
    I'm running Snow Leopard 10.6.8 on a 2.2Ghz Core I7 MBP with 8GB of RAM. 
    I recently set up my own website and installed Wordpress. As it is a photography website, it involves a lot of image uploads, however every time I try to use the uploader and select my files through the web form, the browser hangs and so does the Finder. This behavior is the same across Chrome, Firefox and Safari.
    The only way to get things rolling is to do a hard reset (using the power button). A friend of mine has faced the same issue in his system both with Wordpress and Facebook... And the two of us a stumped.
    Here are some of the possible solutions I've tried :
    Disable Intego Firewall
    Disable Little Snitch
    Repairing disk permissions through disk utility
    Use Onyx to clear user and system caches
    My suspicions lie with java asI believe both those sites use Java based uplod applets (sure about facebook,not sure about wordpress) 
    As a last resort, I've gone to the extent of installing windows on a Paralles Vm and using the browser there to perform the upload, but this has resulted in a crash once and the finder becoming unresponsive.
    Any light you can share on the matter would be most appreciated.
    If there are any logs I need to post here, please let me know how I'd get to them as I'm not too good with the Mac OS system utilities.
    Thanks.
    Brian

    Ok took this one step further and swapped out the 8GB upgrade back to the 4GB that originally came with my laptop.This didnt solve the problem so I dont think this is related to the hardware.
    Here's one more thing I noticed though. The crash doesnt happen if you upload files the moment you turn on the PC. But after about 15 minutes of usage if I try to upload the file... system down.
    It also baffles me that finder gets taken down along with the browser......
    Anyone with a similar issue  / solution ?

  • HT1473 I am trying to upload my itunes music from my ipod to my computer.  My current Itunes library is listing the songs, but cannot find them when I try to put them on to my iphone.

    I am trying to upload my itunes music from my ipod to my itunes on my computer.  My itunes music lists all of the music, but cannot find it when I try to load it to my phone.
    The songs are on my ipod, but not on my phone and I don't know how to get them from one device to the other.

    In your case, it would be better to have transferred the library to an external drive from the PC. Then, connect it to the iMac and put the library onto the Music folder.
    You used Migration Assistant, and it creates a new user with the transferred data.
    Open  > Log Out, and log in the new user. Then, open a Finder window, choose Music in the sidebar and you will see the iTunes library. Now, you have to move the iTunes library to /Users/Shared (select Go menu -in the menu bar- > Go to Folder, type that and copy the iTunes library to it). Finally, log in the other user, go to the same folder and move the library to the Music folder.
    After doing that, open System Preferences > Users and Groups, choose the user created by Migration Assistant and press the - button to remove it. This is easier if you have an external drive

  • HT4759 when i tried to backup my contacts from my i phone 4s to be in i cloud, it dosn't work and i can not find any contact uploaded

    when i tried to backup my contacts from my i phone 4s to be in i cloud, it dosn't work and i can not find any contact uploaded, plz help

    Sorry no backup - no pictures.
    Yes phone will automatically backup to icloud when on wifi and phone is charge, but your phone storage was full so it stop backing up.
    Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes - Apple Support
    iCloud: iCloud storage and backup overview
    When your phone was connected to your computer, you should've seen an autoplay which would've allowed you to import your pics to your computer as you would a digital camera Import photos and videos from your iPhone, iPad, or iPod touch to your Mac or Windows PC - Apple Support

  • How do I find out when our exchange will be upgrad...

    Our exchange is very small (around 35O lines) and we are a long way from it - 4km.  At the very best - early in the morning - we can get 1.5mb download and 0.35mb upload.  By the time everyone else is on it in the evenings it doesn't really work at all - so slow you can't check the speeds.  Have done all we can locally, am a county broadband champion, but seems impossible to find out when the BT exchange will be upgraded.  Suspect we are too rural and will be in the 10% not covered by the Government's weedy promise of 2015.  Such a missed opportunity - as better broadband would be a fantastic boost to rural economies and save fuel. Anyone know how a) you can find out the plans and b) what's the best way to lobby?

    Hi,
    Your exchange is probably ADSLMax enabled giving your speeds of up to 8mb. The upgrade your probably talking about is the upgrade to BTw's 21cn network which enables ADSL2+ at your exchange. ADSL2+ is upto 20mb.
    You can check if your exchange is going to be upgraded here: http://www.samknows.com/broadband/broadband_checker
    However if you have a long line then a good stable line on ADSLMax may not be a good stable line on ADSL2+ as ADSL2+ is more aggressive to any noise on your line.
    Once BTW and Openreach have upgraded your exchange it can take days/weeks/months till your line is upgraded to ADSL2+ as they are manual transferred to the new equipment in the exchange in batches.
    If your on a ling line then you might be moved to BTw's 21cn network but kept on ADSLMax.
    If your able to supply your ADSL Line Statistics and a BT speedtest we might be able to tell you if you will benefit from ADSL2+.
    1) ADSL Line Stats Help
    If you have a BT Home Hub like the one below...
    Then:
    1) Go to http://192.168.1.254 or http://bthomehub.home
    2) click Settings
    3) Click Advanced Settings
    4) Click Broadband
    5) Click Connection or sometimes called ADSL (see picture Below)
    The direct Address is http://bthomehub.home/index.cgi?active_page=9116 (for bthomehub3)
    2) can your post your BT Speedtest results by using http://speedtester.bt.com (not beta version) [best done with a wired connection ie Ethernet]
    cheers
    jac_95 | BT.com Help Site | BT Service Status
    Someone Solved Your Question?
    Please let other members know by clicking on ’Mark as Accepted Solution’
    Try a Search
    See if someone in the community had the same problem and how they got it resolved.

  • I just purchased Time Capsule today.  I ONLY want to use it as an external drive.  I do not need it for Time Machine. I can see the TC in my finder, but when I click on a file or video to drag and drop, I get message that TC can't be modified. Help please

    I just purchased Time Capsule today.  I ONLY want to use it as an external drive.  I do not need it for Time Machine. I need to free up room on my computer. As of now, I can't even load updates. I can see the TC in my finder, but when I click on a file or video to drag and drop, I get message that TC can't be modified. Help please!

    I agree with Kappy.. passing files and especially via wireless is slow as slow.
    Just need to be sure your TC is the new AC model??
    And the OS on the computer is Lion?
    Have you completed the setup of the TC via the utility? You do still need to get internet via the TC so it has to be plugged into the main router..
    Give us the full picture of the network.
    Then we can help you get into it.. whether you should put your files on it is another question.

  • How do I change the default folder that opens when uploading a file to the internet from my mac? (at the moment it automatically defaults to 'Downloads' folder)

    How do I change the default folder that opens when uploading a file to the internet from my mac? (at the moment it automatically defaults to 'Downloads' folder)
    For example...
    I am on a webiste and wish to upload a photo.
    I click on select file on the website
    Finder opens and defaults to 'Downloads' folder (it happens with all wesbites)
    How do I change this?

    I am on a webiste and wish to upload a photo.
    I click on select file on the website
    You are attempting to download the picture to your computer not uploading photo to the website if I am understanding you correctly.
    To change the download direction, you must do so through your browser's Preferences.  If you are using Safari, hopefully, someone who uses Safari will help you and/or post over in their forums.  I do not use Safari.
    If using Firefox>Preferences>General>Save Files to:

  • Late-2009 iMac elusive freezing when uploading video

    Hey All,
    So I am currently experiencing a freezing problem when I try to upload youTube videos through firefox and/or safari after... a checkered past. Hopefully this isn't TMI, just being thurough to save your valuable effort.
    iMac Details:
    21.5-inch, Late 2009
    3.06 GHz Intel Core 2 Duo
    4 GB 1067 MHZ DDR3
    ATI Radeon HD 4670 256 MB
    OS X 10.8.5 (12F45)
    I am using bootCamp with windows 7
         -fyi i did have w7 virtual RAM manually defined (properly or so I thought) and have since reverted to cpu defined vram.
    Funny part is when I was exporting a video from iMovie while simultaniously mixing tracks on virtualDJ while playing a youtube video, everything was fine. Now the history...
    1. Trouble started when I was getting the 'click of death' and the 'beach ball of death' seemingly at random while running various apps one at a time.
         -I reset my PRAM
         -I was and am still totally unable to run AHT (superdrive is dead and all key comands do nothing)
         -I verified disk permissions (there were a lot of errors so I repaired them)
         -I verified the disk (it passed), I repaired the disk even though it didn't need it.
         -I downloaded, installed and ran MemTest. (passed 100%)
         -I determined that I might have a kernal extension problem so I deleted Virtual Box and that seemed to calm things down... for awhile.
    2. So there was peace in the galaxy for a couple months until after running in my windows partition I tried multiple times and could not boot into my OS X partition.
         -I again reset PRAM
         -I again verified and repaired disk permissions (all went fine, tho agian there were many permission errors)
         -I again verified and repaired the disk (even though it passed)
         -I safe booted, it worked
         -I booted into OS X, it worked.
    3. Now, I can restart OS X whenever I want but hard freezing (finder is not responding and refuses to relaunch) still occures when uploading video to youTube having tried multiple browsers.
         -Before when it froze Activity Monitor showed no disk activity, and plenty of realMemory was available.
         -I haven't actaully gotten a read form Activity Monitor when trying to upload. I will tho.
         -I have been unable to find any 'memory leaks' tho I may not understand how to track this
         -My bootcamp partion is totally fine and I've since allowed the CPU to define vram
         -Memtest just now passed all tests.
         -I have had to do hard restart several times while trying different internet browsers.
         -My OS X partition has 344.22 GB free of 1.35 TB.
         -I have no external hardware plugged in, only a USB keyboard and mouse.
    So, a few questions...
         1. Did my manual addition of Virtual RAM on my bootcamp partition mess up my ram? if so why does it still test okay?
         2. Do I have to run memtest as the root user to get a real read on my ram? I haven't done this, yet.
         3. Why do I still get freezes while uploading video even tho when I try to max out my memory usage everything runs fine, no freezing?
         4. Is my hardrive messed even tho it passes checks when I'm booted to an external recovery drive?
         5. Is Apple trying to tell me they want more of the money I don't have anymore because I bought this thing 5 years ago?
    Ya'll are heros for even trying. You knew that. I'm just reminding you.

    So, I've been attempting to solve the issue by using diskUtility to erase free space on my mac and bootcamp partitions to identify bad drive sectors. Unfortunately erasesing free space did not work after defrag on the bootcamp partition. It simply crashed.
    Intitally on the OS X partition I did successfully erase free space and that improved all problems for about 3 days. Then freezes became random and increased in regularity. So I moved about 500GB of data to an external drive (the important stuff) and tried to erase free space again to make it identify bad sectors. So I've tried both booting into my external and recovery drive and having the utility erase free space. Both atempts failed when the utility simply gave up after 2hrs and would no longer recognize the drive. I'm booted into my mac partition right now and am gettimg more random freezing with 2/3 of the drive free.
    I'm resigned to claiming warranty and replacing the drive after upgrading it about 2yrs ago but can't find any real info on what my model and serial number are. All info that I've found does not seem to direct me to the correct information as I've tried entering it into Seagate's website and it will not accept my input. Any advice on claiming on my Seagate warranty and possibly what the model and serial number should look like? I can't seem to find the right numbers.

  • Finder crash when opening any Folder

    I am a very experienced mac user and this one has me stumped. Im posting here to see if anyone else has this problem.
    Finder crashes when opening a folder on the desktop
    Finder crashes when using any option from the Go menu (or key combo) except Airdrop.
    Once Finder window is open on Airdrop any navigation to home folder or any other folder using side bar causes Finder to crash.
    Using Go To Folder causes crash, even on hidden folder like /var
    Finder is OK when opening files on desktop
    All other apps can browse file system and open/save OK
    Google Drive is not present on system (this used to be an issue a long time a go that caused similar symptoms in other threads)
    Drop Box is installed. But issue occurs even when dropbox is not running
    Using spotlight to open applications still works normally.
    Clicking the Finder icon in the Dock results in a non-functional blank window entitled "Window", all tool buttons are disabled.
    Repeatedly opening the same folder over and over results in the message "The last time you open Finder, it unexpectedly quite while reopening windows. Do you want to try to reopen its windows again? If you choose not to reopen windows, you may have to open and position the windows yourself" Two options "Don't Reopen" and "Reopen". Both buttons have no effect except to dismiss the dialog.
    Steps Taken to fix:
    Booted into recovery mode and performed repair disk and Permissions - Finder Still Crashes
    Removed finder preference files using terminal
    ~/Library/Preferences/com.apple.finder.plist
    ~/Library/Preferences/com.apple.sidebarlists.plist
    Recent changes to system:
    iTunes 11.4 Installed with normal Software Update.
    Possible Cause of Problem
    Found app in iTunes that has File Sharing enabled and has a shared folder. Curious as to what was in the folder i dragged it to my desktop and double clicked. Im not sure if iTunes would have had enough time to copy the contents of the folder before i tried to open the folder. Finder crashed. This was the first time it happened.
    iPhone app in iTunes that I picked in was "Ubersense".

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p) if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' s/^ +N.+ =//p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return  three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
    12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Maybe you are looking for