Slow folder synchronization on windows 8.1 LR4.4

Hi there,
I need a small feedback from you. I have LR4.4 installed on both Mac OS 10 (MacBook air) and Win8.1 and I see that mac version is able to access my photos on network storage (synology disk station) much faster than windows version. The difference in speed, for example for synchronizing the folder with 50000 photos took only 15 min to show the number of photos to be synchronized on Mac compared to half day on win8.1. Further, Mac version took only less than an hour to actually synchronize the folder compared to almost a day that win version took. Can you tell if this difference is natural due to OS differences or if there is any problem with the windows version of the LR or other network settings I have to check on windows. I access the sinology over wifi on both Mac and windows machines. Thanks a lot for your valuable time and help in this regard.

Hi,
Here is a similar thread on Group Policy forum:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/05b12275-c595-4c4a-877a-c6a9e8d5e086/windows-2012-r2windows-81-gpo-folder-redirection-woes?forum=winserverGP
Several possible solutions are delivered including:
1. Try to enable the following setting:
Computer Configuration\Administrative Templates\System\Logon\ Always wait for the network at computer startup and logon
2. Run a RSOP to see the applied group policies and check if any conflict occurs which cause the issue.
3. Test to recreate user profile (as the last reply mentioned) to see if issue still exists.
If you have any feedback on our support, please send to [email protected]

Similar Messages

The new iTunes 12 does not have a rent tab. I've downloaded two movies which appear in the Movies folder on my Windows Explorer but not in the actual iTunes programme itself. Completely frustrating!

The new iTunes 12 does not have a rent tab. I've downloaded two movies which appear in the Movies folder on my Windows Explorer but not in the actual iTunes programme itself. Completely frustrating! Where can I find these two movies to watch? It asked me once it was downloaded if I wanted to watch it but I wasn't ready to and now can't find where to play these again.

When iTunes/iPod sync process failed due to timeout, the iPod, has only the initilaised filesytem structure at the start of the Sync.
The timeout failure could be due to
Bad hardisk - do the iPod disk diagnostic, refer to this excellent post by tt2
Slow USB port or resource - Dont use any USB hub, disconnect all other USB devices while syncing
Timeout due to Antivirus or other plugins - disconnect from Internet and stop the Antivirus or monitoribng software if you are syncing.
Preferably stop doing other things while syncing this ancient device, which the latest iTunes designer, think will soon be extinct.
Have a nice day!

HT201317 Photos from my iphone and ipad are going into my photo stream on the devices but aren't going into the folder on my windows PC. They used to but they suddenly stopped. Has anyone else had this same problem?. I have checked all settings and they a

Photos from my iphone and ipad are going into my photo stream on the devices but aren't going into the folder on my windows PC. They used to but they suddenly stopped. Has anyone else had this same problem?. I have checked all settings and they appear OK

Hi AP_In_Surbiton,
I am really sorry that you have had so much trouble getting your Caller ID up and going. I'll be happy to help you out with this and get it working for you.
Could you drop me in an email please? Use the 'contact us' form in my forum profile under the 'about me' section. You can find it by clicking on my username.
Thx
Craig
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)”
td-p/30">Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Error while installing "Identity Synchronization for Windows"

Hello All,
I am in the middle of installing Identity Synchronization for Windows and I am running into a probelm.
After I gave the ldap address of the Java Directory server, (which is installed in the same machine that I am installing ISW on), then I specified the "Configuration Root Suffix" , and then I gave the "cn=Directory Manager" credentials, It returns an error saying...
The selected Directory Server is not a configuration
directory server. You must select a directory server that
has "o=netscaperoot". Please note that merely adding the
+"o=netscaperoot" entry will not suffice.+
I am running Solaris 10 (SPARC) on a T2000, and I downloaded the latest version of "Sun Java System Directory Server Enterprise Edition" (6.2 I think it is...is there a way to find out?) and I downloaded ISW (1.1 SP1) from Sun.com...
Anyone else had this problem? Any solutions? Thanks.
-C

That was that !
The proof:
possum@laptop ~/Downloads/Sun/Directory Server $ tar tvzf DSEE.6.2.Solaris-Sparc-full.tar.gz | more
drwxr-xr-x svbld/staff       0 2007-08-21 13:51 DSEE_Directory_Editor/
-rw-r--r-- svbld/staff 3154227 2006-10-23 15:23 DSEE_Directory_Editor/DE_InstallConfigGuide.pdf
-rw-r--r-- svbld/staff 113483 2006-10-23 15:23 DSEE_Directory_Editor/DE_ReleaseNotes.pdf
-rw-r--r-- svbld/staff 9649312 2006-10-23 15:23 DSEE_Directory_Editor/de.class
-rw-r--r-- svbld/staff     178 2006-10-23 15:23 DSEE_Directory_Editor/install.bat
-rw-r--r-- svbld/staff     167 2006-10-23 15:23 DSEE_Directory_Editor/install.sh
drwxr-xr-x svbld/staff       0 2007-08-21 13:53 DSEE_Identity_Synchronization_for_Windows/
-rw-r--r-- svbld/staff     831 2007-08-21 13:53 DSEE_Identity_Synchronization_for_Windows/README.txt
drwxr-xr-x svbld/staff       0 2006-11-07 01:32 DSEE_Identity_Synchronization_for_Windows/installer/
drwxr-xr-x svbld/staff       0 2006-11-07 01:16 DSEE_Identity_Synchronization_for_Windows/installer/admserv_package/
drwxr-xr-x svbld/staff       0 2006-11-07 01:17 DSEE_Identity_Synchronization_for_Windows/installer/admserv_package/setup_data/
drwxr-xr-x svbld/staff       0 2006-11-07 01:16 DSEE_Identity_Synchronization_for_Windows/installer/admserv_package/setup_data/l10n/
drwxr-xr-x svbld/staff       0 2006-10-25 14:45 DSEE_Identity_Synchronization_for_Windows/installer/admserv_package/setup_data/l10n/locale/
drwxr-xr-x svbld/staff       0 2006-10-25 14:45 DSEE_Identity_Synchronization_for_Windows/installer/admserv_package/setup_data/l10n/locale/resources/
-rwxr-xr-x svbld/staff 186114 2006-10-25 14:45 DSEE_Identity_Synchronization_for_Windows/installer/admserv_package/setup_data/l10n/locale/resources/ASSetupResources_zh.properties
-rwxr-xr-x svbld/staff 163040 2006-10-25 14:45 DSEE_Identity_Synchronization_for_Windows/installer/admserv_package/setup_data/l10n/locale/resources/ASSetupResources_es.properties
-rwxr-xr-x svbld/staff 163040 2006-10-25 14:45 DSEE_Identity_Synchronization_for_Windows/installer/admserv_package/setup_data/l10n/locale/resources/ASSetupResources_es_ES.properties
-rwxr-xr-x svbld/staff 184456 2006-10-25 14:45 DSEE_Identity_Synchronization_for_Windows/installer/admserv_package/setup_data/l10n/locale/resources/ASSetupResources_zh_TW.properties
-rwxr-xr-x svbld/staff 233399 2006-10-25 14:45 DSEE_Identity_Synchronization_for_Windows/installer/admserv_package/setup_data/l10n/locale/resources/ASSetupResources_ko.properties
-rwxr-xr-x svbld/staff 233399 2006-10-25 14:45 DSEE_Identity_Synchronization_for_Windows/installer/admserv_package/setup_data/l10n/locale/resources/ASSetupResources_ko_KR.properties
-rwxr-xr-x svbld/staff 162199 2006-10-25 14:45 DSEE_Identity_Synchronization_for_Windows/installer/admserv_package/setup_data/l10n/locale/resources/ASSetupResources_de.properties
-rwxr-xr-x svbld/staff 162199 2006-10-25 14:45 DSEE_Identity_Synchronization_for_Windows/installer/admserv_package/setup_data/l10n/locale/resources/ASSetupResources_de_DE.properties
-rwxr-xr-x svbld/staff 172057 2006-10-25 14:45 DSEE_Identity_Synchronization_for_Windows/installer/admserv_package/setup_data/l10n/locale/resources/ASSetupResources_fr.properties
-rwxr-xr-x svbld/staff 172057 2006-10-25 14:45 DSEE_Identity_Synchronization_for_Windows/installer/admserv_package/setup_data/l10n/locale/resources/ASSetupResources_fr_FR.propertiesSo, we need both packaging: native PKG and tar.gz ! Great !
I think this thread can be marked as resolved now.

Can't mount a folder from a windows network..

Our "IT" (outsourced) department migrated the network folders to another server and changed the filepath on the one folder I need to mount on my Macbook Pro (OSX 10.6.8).
I have been able to mount the new folder onto other Windows boxes succesfully, but the filepath name doesn't work. I can get to the server and mount other folders there, but they have changed the file path and I'm hitting a brick wall when I try and mount it. The error message says that my Mac can't find the original folder..
Here is the windows ORIGINAL filepath ://pcmsf01\dept
Here is the new filepath ://pcmfs02\d\dept
The dept folder is the one in question...
As I said, I can mount other folders from the new (pcmfs) server, but I really think that the new naming of the filepath is confusing the Mac
Any help will be greatly appreciated.

Hold the COMMAND key while dragging a sidebar entry out of the sidebar.

Extremely annoying problem with user folder name in windows 8.1

Here is the thing:
Friend of mine bought the laptop (very strong and expensive asus - republic of gamers) with installed windows 8.1 on it, but after a few days only I bought that computer from him because he didn't need it and he didn't use it at all!
But, his name stayed in the windows. I changed all user accounts names and everything which was possible to be changed, but when i go to C/users his name is still there on folder!
I can say it is very annoying because that laptop cost almost 3.000 USD and I still need to look at someone else's name in my user folder!
I tried to change "ProfileImagePath" in: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList\ .... but after that windows logged in as a temporary profile and I spend another hour to figure out
how to reverse the thing!
How is possible that some so basic and simple things can't be changed at all in newest windows??? Only because some name was entered first it's not possible to be changed ever again???? Seriously?
Not only this problem, there is too many problems with this windows 8.1! Too many! You definitely made the worst thing ever!
I am extremely unhappy and upset with this operative system! I,m cursing the day when i gave so much money for computer with crap called windows 8.1!!!!
Very very angry!!!
(P.S English is not my native language)

Hi,
According to your description, it seems that you have resolve that issue.
Not only this problem, there is too many problems with this windows 8.1! Too many! You definitely made the worst thing ever!
Please let us know what problem did you encounter? Please give us more detailed information in order to provide the further help.
Here is a overall guide for you to know well the Windows 8.1
Windows 8.1: frequently asked questions
No Karen, I didn't resolve the issue.
I asked very simple question how to change something so basic like user folder name in Windows 8.1
You know: "C:/Users/"user name"
All the links you are giving to me doesn't provide any concrete answer to this question. I spent hours and hours googling and researching about this question and only solution which i found is that i need to create completely new user account and delete completely
the old one, just to be able to remove an old name of user folder! Are you kidding me?
How is possible that such a basic thing is so complicated?
Is there any way to change folder user name in any other way because i don't want to create a new user account!
Simple question, but, like always, no any concrete answers - just some empty talks, and totally useless links and SPINNING IN THE CIRCLE all the time without the CONCRETE solution.
As for part of my post which you quoted, and your request for more informations in order to provide me further help, i just gave it to you again. I want to change user folder name. What you don't understand in that question?
UPDATE:
Ok, i came back to edit this post because i have a feeling that maybe you don't understand the question and giving me this link because maybe you simply don't know that when you go to:
Control panel/user accounts/change your account name... and change the name, and after that, when you go to C:/users, the folder with the user name still have an old user name. Which means that any changes in control panel or anywhere else doesn't make any
changes on C:/users/ folder itself!!!!!
In previous windows versions was possible to change it by editing "ProfileImagePath" in:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList\ ....
But when I try to do that in Windows 8.1, when I reboot computer it logs in with some temporary account, so i need to reverse everything to be able to use computer with the real account!
So basically it seems that is absolutely impossible to change user folder name in Windows 8.1, which is simply unbelievable!
I really think i explained very good now.

Setting folder permission in windows 8.1

setting folder permission in windows 8.1

Hi,
You can set the share and NTFS permissions on a file\folder, I'd like to share the following links with you:
(Permissions in Windows 8.1 are similiar to Windows 7)
http://windows.microsoft.com/en-in/windows/what-are-permissions#1TC=windows-7
https://technet.microsoft.com/en-in/library/cc772196.aspx?f=255&MSPPError=-2147217396
https://technet.microsoft.com/en-us/library/cc770962.aspx
Yolanda Zhu
TechNet Community Support

I can't resync and uninstall Identity Synchronization for Windows 1.0

Hi, every body.
I downloaded and installed Identity Synchronization for Windows 1.0 on Solaris 8.
But I can't execute idsync resync comannd. The below error message is output on console,
# ./idsync resync -h crow.bird.soft.hitachi.co.jp -p 3890 -D cn=manager -w managersecret -q netscape -s dc=bird,dc=soft,dc=hitachi,dc=co,dc=jp
Exception in thread "main" java.lang.NoClassDefFoundError
at com.sun.directory.wps.registry.model.dao.LDAPConfigurationRegistryDAO.initializeEncryptor(LDAPConfigurationRegistryDAO.java:756)
at com.sun.directory.wps.registry.model.dao.LDAPConfigurationRegistryDAO.open(LDAPConfigurationRegistryDAO.java:721)
at com.sun.directory.wps.registry.util.BasicRegistryFacade.openRegistry(BasicRegistryFacade.java:120)
at com.sun.directory.wps.registry.util.BasicRegistryFacade.openRegistry(BasicRegistryFacade.java:211)
at com.sun.directory.wps.ui.model.PSWConfigurationFacade.openRegistry(PSWConfigurationFacade.java:1126)
at com.sun.directory.wps.ui.model.PSWConfigurationFacade.openRegistry(PSWConfigurationFacade.java:1114)
at com.sun.directory.wps.ui.cli.CRCLIProgram.getConfigurationFacade(CRCLIProgram.java:64)
at com.sun.directory.wps.ui.cli.RefreshUsers.execute(RefreshUsers.java:283)
at com.sun.directory.wps.ui.cli.ResyncUsers.<init>(ResyncUsers.java:54)
at com.sun.directory.wps.ui.cli.IdSyncProgram.execute(IdSyncProgram.java:94)
at com.sun.directory.wps.ui.cli.IdSyncProgram.<init>(IdSyncProgram.java:129)
at com.sun.directory.wps.ui.cli.IdSyncProgram.main(IdSyncProgram.java:135)
And I can't execute runUnInstaller.sh too becasu same error messages in logs/cli/error.log file.
Both error outputs same message "org/apache/xerces/utils/Base64" in log files, so I think CLASSPATH is wrong.
In runUninstaller.sh, below jar file name are written -classpath arguments.
/usr/share/lib/mps/jss3.jar
/usr/sfw/share/lib/xerces-200.jar
These Are settings correct?
If these settings are wrong, resync is set by same wrong settings in binary code?
Please tell me how to resync and to uninstall Identity Synchronization for Windows 1.0.

I mistakes log file name.
I wrote:
And I can't execute runUnInstaller.sh too becasu same error messages in logs/cli/error.log file.But runUnsitaller.sh outputs to /var/sadm/install/logs/Uninstall-xxxxxxx.log.
logs/cli directory is where idsync command outpus error.log and audit.log.
Sorry.

TS3989 My Photo Stream works and I have iCloud control panel installed. The photo stream sync is selected, but when I go to the my photo stream folder on my windows PC there are no photos in the file.

My Photo Stream works and I have iCloud control panel installed. The photo stream sync is selected, but when I go to the my photo stream folder on my windows PC there are no photos in the file.

mlvov,
I did as you said and went to the icloud control panel on my Windows 8 Laptop to be sure I was looking at the correct folder for my photo stream. All my "shared" albulms pushed to my Laptop and are up-to-date with the exception of the "photostream" album. If I create a "shared stream album" and place photo's in it on the phone; I can see the photos on my laptop. I dont get it. I had a iphone 4s and had zero isues and now with my new nifty iPhone 5s it doesent work.
What am I not doing correctly.
Thanks,
iPhone, 5s, iOS 7.0.2

What is happening about Java System Identity Synchronization for Windows

I have been playing with "Java System Identity Synchronization for Windows" for a while now. I am about to swich over to is 100%, but I am worried that the latest version is "Windows 1 2004Q3".
Has any one got any ideas about this. The product sort of works, and is much smaller that going for the whole "Java System Identity Management Suite 2005Q4" which is way to big and complicated for our and I think many people.
Don't forget Microsoft have now release its own tools to do this in the latest Windows 2003 SP.
Andrew

ISW is already present in the 5.2p4 and 5.2p6 archives.
dn: cn=pswsync,cn=plugins,cn=config
objectClass: top
objectClass: nsSlapdPlugin
objectClass: ds-signedPlugin
objectClass: extensibleObject
cn: pswsync
nsslapd-pluginPath: /export/home/abc/local/ds52p6/lib/psw-plugin.so
nsslapd-pluginInitfunc: pswsync_init
nsslapd-pluginType: preoperation
nsslapd-pluginEnabled: off
creatorsName: cn=server,cn=plugins,cn=config
modifiersName: cn=server,cn=plugins,cn=config
createTimestamp: 20090121011643Z
modifyTimestamp: 20090121011643Z
nsslapd-pluginId: Identity Sync for Windows
nsslapd-pluginVersion: 5.2_Patch_6
nsslapd-pluginVendor: Sun Microsystems, Inc.
nsslapd-pluginDescription: Identity Synchronization for Windows Plug-In

Unable to download Sun Java System Identity Synchronization for Windows

Please any one can help me How can i download Sun Java System Identity Synchronization for Windows
* Sun Java System Directory Server ---------------------able to download
* Sun Java System Directory Proxy Server --------------able to download
* Sun Java System Identity Synchronization for Windows-------------Not able to download
* Sun Java System Directory Editor------------------------able to download
* Sun Java System Directory Server Resource Kit------able to download
Regards
kamal

ISW is already present in the 5.2p4 and 5.2p6 archives.
dn: cn=pswsync,cn=plugins,cn=config
objectClass: top
objectClass: nsSlapdPlugin
objectClass: ds-signedPlugin
objectClass: extensibleObject
cn: pswsync
nsslapd-pluginPath: /export/home/abc/local/ds52p6/lib/psw-plugin.so
nsslapd-pluginInitfunc: pswsync_init
nsslapd-pluginType: preoperation
nsslapd-pluginEnabled: off
creatorsName: cn=server,cn=plugins,cn=config
modifiersName: cn=server,cn=plugins,cn=config
createTimestamp: 20090121011643Z
modifyTimestamp: 20090121011643Z
nsslapd-pluginId: Identity Sync for Windows
nsslapd-pluginVersion: 5.2_Patch_6
nsslapd-pluginVendor: Sun Microsystems, Inc.
nsslapd-pluginDescription: Identity Synchronization for Windows Plug-In

How to fix Import and folder-synchronize?

Installed Lightroom 4.2 RC. Now Import and folder synchronize hang up. Uninstalled 42. RC with same result. Removed and then reinstalled 4.1 with same problem.
Please advise.
[email protected]
Message was edited by: SD Rowdies

They might not be compatible with the iPad's video capability. Are they Flash videos?

HT1535 i have 4 ipods on my itunes but my computer was running slow so i put windows 7 on it and installed itunes but if i sync my ipod it will erase all my music i want to know how to take my music from my ipod and send it to my playlist so when i sync m

i have 4 ipods on itunes but my computer was running slow so i put windows 7 on it but it wants me to sync my ipod but if i do i will lose all my music on my ipod how do i take my music and send it to my playlist so i can sync myipod so i won't lose any music

Sync is only oneway, from PC to your device. Unless you have the music on your PC, iTunes is going to wipe out what you have on your device if you are syncing to a new library.
You can only transfer Purchased music over to Itunes on your PC.
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
http://support.apple.com/kb/HT1848
As for you own music, you may have to use a third party software. A good Free one is called Sharepod which you can download from Download.com here:
http://download.cnet.com/SharePod/3000-2141_4-10794489.html?tag=mncol;2

Help with Adobe.premiere.elements12. Please It would appear under the organizer tab that the photos are organised in the lowest folder in the folder structure within Windows Explorer. How can I use the Windows Explorer structure to organise the photos wi

Help with Adobe.premiere.elements12. Please
It would appear under the organizer tab that the photos are organised in the lowest folder in the folder structure within Windows Explorer. How can I use the Windows Explorer structure to organise the photos within Elements.

In a situation such as yours, I tend to consolidate items into folders so I have folders of nice workable numbers of images, somewhere between 20 and 200 images. Now, whatever, once you've imported, do your moving within LR, not the OS! I will select all in a folder and drag into a folder a level or two or three above, and then delete the newly empty subfolders. I hope this helps a bit!
Once you've reached just new Imports of camera output, you'll be flying along.

Can't configure Identity Synchronization for Windows through Server Console

Hi everybody!
I am trying to get Sun Java System Directory Server EE talking with Windows Active Directory buy my progress has come to a halt getting Identity Synchronization for Windows 6 configured and working. I would appreciate any hints!
Here are the steps I have taken:
1. I installed Directory Server Enterprise Edition 6.3.1 using native packages, no problems there (in terms of adding resources to directory, browsing them, etc).
2. I installed the Message Queue (3.6 05Q1) that is bundled with the zip archive of DSEE
3. I installed Identitty Synchronization for Windows (6), that is bundled with the zip archive of DSEE
4. Logged into Sun Java System Server Console as per instructions after install.
Here is where I am stuck!
I logged in, but something is really weird! Here is what my structure looks like in the default view:
domain name
+Server
++Server Group [desc: Directory Server 6.0 /opt/SUNWdsee/ds6]
++Server Group (1) [var/mps/serverroot]
+++Administration Server
+++Identity Synchronization for Windows [details are totally blank... even icon is an empty blue square!]
This is the second time I went through the process of installing all this stuff, I made sure to pay attention to the installation instructions as best as I could, but I am very new to Solaris and unfortunately am on an extremely tight deadline.
I am suspecting the problem has something to do with ports or directories, but my knowledge of Solaris is not even at a level where I can troubleshoot this by myself. Even if you have some advice that seems stupid to you, please let me hear it! I am pretty stupid, I might benefit from it!!
Please, if anyone has any hints or suggestions, I would love to hear them. Like I said, I configured all this while following the installation guides, but I am worried I missed something or misunderstood something.
Thanks in advance,
Al
Edited by: newtmonkey on May 25, 2009 2:05 AM

Hello wlier, thanks for all your help with this! I really appreciate it.
Reinstalled this whole thing, and at least I got everything under one server group... still can't access ISW though... it is listed in the leftside pane, but when I click on it the rightside pane goes completely blank.
~status of idsnyc is:
-no connectors were found
-System Manager Status: Started
next step is "1. create an initial configuration using the product's console..."
~installed/configured everything as root
~no errors generated when I login to the console, but when I expand the hostname in the leftside pane I get the following error:
Exception in thread "Thread-2" java.lang.UnsatisfiedLinkError: /usr/lib/mps/libjss4.so: ld.so.1: java: fatal: libnss3.so: open failed: No such file or directory
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1751)
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1676)
at java.lang.Runtime.loadLibrary0(Runtime.java:822)
at java.lang.System.loadLibrary(System.java:993)
at org.mozilla.jss.CryptoManager.loadNativeLibraries(CryptoManager.java:1443)
at org.mozilla.jss.CryptoManager.initialize(CryptoManager.java:912)
at com.netscape.management.client.util.UtilConsoleGlobals.initJSS(Unknown Source)
at com.netscape.management.client.util.UtilConsoleGlobals.getLDAPSSLSocketFactory(Unknown Source)
at com.sun.directory.wps.ui.gui.view.PSWServer.<init>(PSWServer.java:71)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
at java.lang.Class.newInstance0(Class.java:350)
at java.lang.Class.newInstance(Class.java:303)
at com.netscape.management.client.topology.ServerNode.createServerInstance(Unknown Source)
at com.netscape.management.client.topology.ServerNode$ServerLoadThread.run(Unknown Source)
~If "run the Administration Server from the Server Group" means what I think it means, I can do that with no problem. I can double click on the Administration Server and configure various options, start/stop the server, etc.
~I just have one interface/hostname configured, and the Server Console shows the correct name
It's like it's not making the connection to the ISW server (btw, it is listed as "isw-solaris1"... is this okay? "solaris1" is the hostname for this server). From what I understand after logging in to Server Console as Directory Manager, it should be asking me for a password to access ISW, but I don't any kind of login/password prompt.
I should be logging in to Server Console on the port I configured during ISW installation, right? In my case, port 1390.
We don't have a service plan and I doubt my company would want to spring the cash for it, so I'm pretty much stuck!!

Slow folder synchronization on windows 8.1 LR4.4

Similar Messages

Maybe you are looking for