Slow GDM - different issues than other posts

Hi all,
GDM is slow to start (compare to what it use to be) the issue is I can't pin point why, as I have made a lot of updates lately including moving to Grub2 and changing quite a few .pacnew today (I know I should do it right away...)
I seems however to be an issue with the nvidia driver (see below xorg.0.log for more information)
FYI I run dual screen with twinview
Many thanks for your assistance,
Regards,
[ 11.851]
X.Org X Server 1.12.3
Release Date: 2012-07-09
[ 11.851] X Protocol Version 11, Revision 0
[ 11.851] Build Operating System: Linux 3.4.4-3-ARCH i686
[ 11.851] Current Operating System: Linux (none) 3.4.6-1-ARCH #1 SMP PREEMPT Fri Jul 20 07:24:45 UTC 2012 i686
[ 11.851] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=f4a7ed0a-8a4a-4e43-8b57-4ccddec8f31e ro quiet
[ 11.851] Build Date: 09 July 2012 04:03:16PM
[ 11.851]
[ 11.851] Current version of pixman: 0.26.2
[ 11.851] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 11.851] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 11.851] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jul 28 14:50:20 2012
[ 11.908] (==) Using config file: "/etc/X11/xorg.conf"
[ 11.908] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 11.940] (==) ServerLayout "Layout0"
[ 11.940] (**) |-->Screen "Screen0" (0)
[ 11.940] (**) | |-->Monitor "Monitor0"
[ 11.959] (**) | |-->Device "Device0"
[ 11.959] (**) |-->Input Device "Keyboard0"
[ 11.959] (**) |-->Input Device "Mouse0"
[ 11.959] (**) Option "BlankTime" "0"
[ 11.959] (**) Option "StandbyTime" "0"
[ 11.959] (**) Option "SuspendTime" "0"
[ 11.959] (**) Option "OffTime" "0"
[ 11.959] (**) Option "Xinerama" "0"
[ 11.959] (==) Automatically adding devices
[ 11.959] (==) Automatically enabling devices
[ 12.050] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 12.050] Entry deleted from font path.
[ 12.161] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 12.161] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 12.161] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 12.161] (WW) Disabling Mouse0
[ 12.161] (II) Loader magic: 0x82235a0
[ 12.161] (II) Module ABI versions:
[ 12.161] X.Org ANSI C Emulation: 0.4
[ 12.161] X.Org Video Driver: 12.0
[ 12.161] X.Org XInput driver : 16.0
[ 12.161] X.Org Server Extension : 6.0
[ 12.162] (--) PCI:*(0:1:0:0) 10de:1245:196e:085a rev 161, Mem @ 0xfc000000/33554432, 0xd8000000/134217728, 0xd4000000/67108864, I/O @ 0x0000bc00/128, BIOS @ 0x????????/524288
[ 12.162] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 12.162] (II) LoadModule: "extmod"
[ 12.253] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 12.302] (II) Module extmod: vendor="X.Org Foundation"
[ 12.302] compiled for 1.12.3, module version = 1.0.0
[ 12.302] Module class: X.Org Server Extension
[ 12.302] ABI class: X.Org Server Extension, version 6.0
[ 12.302] (II) Loading extension MIT-SCREEN-SAVER
[ 12.302] (II) Loading extension XFree86-VidModeExtension
[ 12.302] (II) Loading extension XFree86-DGA
[ 12.312] (II) Loading extension DPMS
[ 12.312] (II) Loading extension XVideo
[ 12.312] (II) Loading extension XVideo-MotionCompensation
[ 12.312] (II) Loading extension X-Resource
[ 12.312] (II) LoadModule: "dbe"
[ 12.312] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 12.328] (II) Module dbe: vendor="X.Org Foundation"
[ 12.329] compiled for 1.12.3, module version = 1.0.0
[ 12.329] Module class: X.Org Server Extension
[ 12.329] ABI class: X.Org Server Extension, version 6.0
[ 12.329] (II) Loading extension DOUBLE-BUFFER
[ 12.329] (II) LoadModule: "glx"
[ 12.329] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 13.332] (II) Module glx: vendor="NVIDIA Corporation"
[ 13.332] compiled for 4.0.2, module version = 1.0.0
[ 13.332] Module class: X.Org Server Extension
[ 13.332] (II) NVIDIA GLX Module 302.17 Tue Jun 12 18:58:55 PDT 2012
[ 13.332] (II) Loading extension GLX
[ 13.332] (II) LoadModule: "record"
[ 13.332] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 13.347] (II) Module record: vendor="X.Org Foundation"
[ 13.347] compiled for 1.12.3, module version = 1.13.0
[ 13.347] Module class: X.Org Server Extension
[ 13.347] ABI class: X.Org Server Extension, version 6.0
[ 13.347] (II) Loading extension RECORD
[ 13.347] (II) LoadModule: "dri"
[ 13.347] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 13.364] (II) Module dri: vendor="X.Org Foundation"
[ 13.364] compiled for 1.12.3, module version = 1.0.0
[ 13.364] ABI class: X.Org Server Extension, version 6.0
[ 13.364] (II) Loading extension XFree86-DRI
[ 13.364] (II) LoadModule: "dri2"
[ 13.364] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 13.364] (II) Module dri2: vendor="X.Org Foundation"
[ 13.364] compiled for 1.12.3, module version = 1.2.0
[ 13.364] ABI class: X.Org Server Extension, version 6.0
[ 13.364] (II) Loading extension DRI2
[ 13.364] (II) LoadModule: "nvidia"
[ 13.383] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 13.456] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 13.456] compiled for 4.0.2, module version = 1.0.0
[ 13.456] Module class: X.Org Video Driver
[ 13.480] (II) LoadModule: "evdev"
[ 13.480] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 13.501] (II) Module evdev: vendor="X.Org Foundation"
[ 13.501] compiled for 1.12.3, module version = 2.7.1
[ 13.501] Module class: X.Org XInput Driver
[ 13.501] ABI class: X.Org XInput driver, version 16.0
[ 13.508] (II) NVIDIA dlloader X Driver 302.17 Tue Jun 12 18:39:24 PDT 2012
[ 13.508] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 13.509] (++) using VT number 7
[ 13.529] (II) Loading sub module "fb"
[ 13.529] (II) LoadModule: "fb"
[ 13.529] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 13.548] (II) Module fb: vendor="X.Org Foundation"
[ 13.548] compiled for 1.12.3, module version = 1.0.0
[ 13.548] ABI class: X.Org ANSI C Emulation, version 0.4
[ 13.548] (II) Loading sub module "wfb"
[ 13.548] (II) LoadModule: "wfb"
[ 13.548] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 13.596] (II) Module wfb: vendor="X.Org Foundation"
[ 13.596] compiled for 1.12.3, module version = 1.0.0
[ 13.596] ABI class: X.Org ANSI C Emulation, version 0.4
[ 13.597] (II) Loading sub module "ramdac"
[ 13.597] (II) LoadModule: "ramdac"
[ 13.597] (II) Module "ramdac" already built-in
[ 13.626] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 13.626] (==) NVIDIA(0): RGB weight 888
[ 13.626] (==) NVIDIA(0): Default visual is TrueColor
[ 13.626] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 13.626] (**) NVIDIA(0): Option "NoLogo" "true"
[ 13.626] (**) NVIDIA(0): Option "RenderAccel" "true"
[ 13.626] (**) NVIDIA(0): Option "TwinViewXineramaInfoOrder" "CRT-1"
[ 13.627] (**) NVIDIA(0): Enabling RENDER acceleration
[ 13.627] (**) NVIDIA(0): Option "MetaModes" "CRT-0: nvidia-auto-select +1440+0, CRT-1: nvidia-auto-select +0+82"
[ 13.627] (**) NVIDIA(0): Enabling 2D acceleration
[ 14.712] (II) NVIDIA(GPU-0): Display (ViewSonic VA902 (CRT-0)) does not support NVIDIA 3D
[ 14.712] (II) NVIDIA(GPU-0): Vision stereo.
[ 14.718] (II) NVIDIA(GPU-0): Display (AOC N19W (CRT-1)) does not support NVIDIA 3D Vision
[ 14.718] (II) NVIDIA(GPU-0): stereo.
[ 14.720] (II) NVIDIA(0): NVIDIA GPU GeForce GTS 450 (GF116) at PCI:1:0:0 (GPU-0)
[ 14.720] (--) NVIDIA(0): Memory: 1048576 kBytes
[ 14.720] (--) NVIDIA(0): VideoBIOS: 70.26.3e.00.10
[ 14.720] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 14.720] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 14.723] (--) NVIDIA(0): Valid display device(s) on GeForce GTS 450 at PCI:1:0:0
[ 14.723] (--) NVIDIA(0): ViewSonic VA902 (CRT-0) (connected)
[ 14.723] (--) NVIDIA(0): AOC N19W (CRT-1) (connected)
[ 14.723] (--) NVIDIA(0): DFP-0
[ 14.723] (--) NVIDIA(0): DFP-1
[ 14.723] (--) NVIDIA(0): DFP-2
[ 14.723] (--) NVIDIA(0): ViewSonic VA902 (CRT-0): 400.0 MHz maximum pixel clock
[ 14.723] (--) NVIDIA(0): AOC N19W (CRT-1): 400.0 MHz maximum pixel clock
[ 14.723] (--) NVIDIA(0): DFP-0: 330.0 MHz maximum pixel clock
[ 14.723] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
[ 14.723] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
[ 14.723] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[ 14.723] (--) NVIDIA(0): DFP-2: 330.0 MHz maximum pixel clock
[ 14.723] (--) NVIDIA(0): DFP-2: Internal Single Link TMDS
[ 14.723] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 14.723] (**) NVIDIA(0): device ViewSonic VA902 (CRT-0) (Using EDID frequencies has
[ 14.723] (**) NVIDIA(0): been enabled on all display devices.)
[ 14.732] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 14.733] (**) NVIDIA(0): device AOC N19W (CRT-1) (Using EDID frequencies has been
[ 14.733] (**) NVIDIA(0): enabled on all display devices.)
[ 14.740] (II) NVIDIA(0): Validated modes:
[ 14.740] (II) NVIDIA(0):
[ 14.740] (II) NVIDIA(0): "CRT-0:nvidia-auto-select+1440+0,CRT-1:nvidia-auto-select+0+82"
[ 14.740] (II) NVIDIA(0): Virtual screen size determined to be 2720 x 1024
[ 14.762] (--) NVIDIA(0): DPI set to (85, 86); computed from "UseEdidDpi" X config
[ 14.762] (--) NVIDIA(0): option
[ 14.763] (--) Depth 24 pixmap format is 32 bpp
[ 14.763] (II) NVIDIA: Using 1024.00 MB of virtual memory for indirect memory
[ 14.763] (II) NVIDIA: access.
[ 14.766] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 14.766] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 14.766] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 14.766] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 14.766] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 14.766] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 14.766] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 14.766] (II) NVIDIA(0): Config Options in the README.
[ 14.769] (II) NVIDIA(0): Setting mode "CRT-0:nvidia-auto-select+1440+0,CRT-1:nvidia-auto-select+0+82"
[ 14.841] (II) Loading extension NV-GLX
[ 14.968] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 14.968] (==) NVIDIA(0): Backing store disabled
[ 14.968] (==) NVIDIA(0): Silken mouse enabled
[ 14.968] (**) NVIDIA(0): DPMS enabled
[ 14.968] (II) Loading extension NV-CONTROL
[ 14.968] (II) Loading extension XINERAMA
[ 14.968] (WW) NVIDIA(0): Option "AGPFastWrite" is not used
[ 14.968] (WW) NVIDIA(0): Option "EnablePageFlip" is not used
[ 14.968] (WW) NVIDIA(0): Option "TwinView" is not used
[ 14.968] (II) Loading sub module "dri2"
[ 14.968] (II) LoadModule: "dri2"
[ 14.968] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 14.968] (II) Module dri2: vendor="X.Org Foundation"
[ 14.968] compiled for 1.12.3, module version = 1.2.0
[ 14.968] ABI class: X.Org Server Extension, version 6.0
[ 14.968] (II) NVIDIA(0): [DRI2] Setup complete
[ 14.968] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 14.969] (--) RandR disabled
[ 14.969] (II) Initializing built-in extension Generic Event Extension
[ 14.969] (II) Initializing built-in extension SHAPE
[ 14.969] (II) Initializing built-in extension MIT-SHM
[ 14.969] (II) Initializing built-in extension XInputExtension
[ 14.969] (II) Initializing built-in extension XTEST
[ 14.969] (II) Initializing built-in extension BIG-REQUESTS
[ 14.969] (II) Initializing built-in extension SYNC
[ 14.969] (II) Initializing built-in extension XKEYBOARD
[ 14.969] (II) Initializing built-in extension XC-MISC
[ 14.969] (II) Initializing built-in extension SECURITY
[ 14.969] (II) Initializing built-in extension XINERAMA
[ 14.969] (II) Initializing built-in extension XFIXES
[ 14.969] (II) Initializing built-in extension RENDER
[ 14.969] (II) Initializing built-in extension RANDR
[ 14.969] (II) Initializing built-in extension COMPOSITE
[ 14.969] (II) Initializing built-in extension DAMAGE
[ 14.971] (II) Initializing extension GLX
[ 15.344] (II) Using input driver 'evdev' for 'Keyboard0'
[ 15.344] (**) Option "CoreKeyboard"
[ 15.344] (**) Keyboard0: always reports core events
[ 15.344] (EE) evdev: Keyboard0: No device specified.
[ 15.344] (EE) PreInit returned 2 for "Keyboard0"
[ 15.344] (II) UnloadModule: "evdev"
[ 15.346] (II) config/udev: Adding input device Power Button (/dev/input/event6)
[ 15.346] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 15.346] (II) Using input driver 'evdev' for 'Power Button'
[ 15.346] (**) Power Button: always reports core events
[ 15.346] (**) evdev: Power Button: Device: "/dev/input/event6"
[ 15.346] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 15.346] (--) evdev: Power Button: Found keys
[ 15.346] (II) evdev: Power Button: Configuring as keyboard
[ 15.346] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event6"
[ 15.346] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 15.346] (**) Option "xkb_rules" "evdev"
[ 15.346] (**) Option "xkb_model" "evdev"
[ 15.346] (**) Option "xkb_layout" "us"
[ 15.366] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 15.366] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 15.366] (II) Using input driver 'evdev' for 'Power Button'
[ 15.366] (**) Power Button: always reports core events
[ 15.366] (**) evdev: Power Button: Device: "/dev/input/event5"
[ 15.366] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 15.366] (--) evdev: Power Button: Found keys
[ 15.366] (II) evdev: Power Button: Configuring as keyboard
[ 15.366] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5/event5"
[ 15.366] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 15.366] (**) Option "xkb_rules" "evdev"
[ 15.366] (**) Option "xkb_model" "evdev"
[ 15.366] (**) Option "xkb_layout" "us"
[ 15.366] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event14)
[ 15.366] (II) No input driver specified, ignoring this device.
[ 15.366] (II) This device may have been added with another device file.
[ 15.367] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event15)
[ 15.367] (II) No input driver specified, ignoring this device.
[ 15.367] (II) This device may have been added with another device file.
[ 15.367] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event16)
[ 15.367] (II) No input driver specified, ignoring this device.
[ 15.367] (II) This device may have been added with another device file.
[ 15.367] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event17)
[ 15.367] (II) No input driver specified, ignoring this device.
[ 15.367] (II) This device may have been added with another device file.
[ 15.367] (II) config/udev: Adding input device UVC Camera (046d:0809) (/dev/input/event13)
[ 15.367] (**) UVC Camera (046d:0809): Applying InputClass "evdev keyboard catchall"
[ 15.367] (II) Using input driver 'evdev' for 'UVC Camera (046d:0809)'
[ 15.367] (**) UVC Camera (046d:0809): always reports core events
[ 15.367] (**) evdev: UVC Camera (046d:0809): Device: "/dev/input/event13"
[ 15.367] (--) evdev: UVC Camera (046d:0809): Vendor 0x46d Product 0x809
[ 15.367] (--) evdev: UVC Camera (046d:0809): Found keys
[ 15.367] (II) evdev: UVC Camera (046d:0809): Configuring as keyboard
[ 15.367] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5:1.0/input/input13/event13"
[ 15.367] (II) XINPUT: Adding extended input device "UVC Camera (046d:0809)" (type: KEYBOARD, id 8)
[ 15.367] (**) Option "xkb_rules" "evdev"
[ 15.367] (**) Option "xkb_model" "evdev"
[ 15.367] (**) Option "xkb_layout" "us"
[ 15.368] (II) config/udev: Adding input device HDA Intel Line Out CLFE (/dev/input/event10)
[ 15.368] (II) No input driver specified, ignoring this device.
[ 15.368] (II) This device may have been added with another device file.
[ 15.368] (II) config/udev: Adding input device HDA Intel Line Out Surround (/dev/input/event11)
[ 15.368] (II) No input driver specified, ignoring this device.
[ 15.368] (II) This device may have been added with another device file.
[ 15.368] (II) config/udev: Adding input device HDA Intel Line Out Front (/dev/input/event12)
[ 15.368] (II) No input driver specified, ignoring this device.
[ 15.368] (II) This device may have been added with another device file.
[ 15.368] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event7)
[ 15.368] (II) No input driver specified, ignoring this device.
[ 15.368] (II) This device may have been added with another device file.
[ 15.369] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event8)
[ 15.369] (II) No input driver specified, ignoring this device.
[ 15.369] (II) This device may have been added with another device file.
[ 15.369] (II) config/udev: Adding input device HDA Intel Line Out Side (/dev/input/event9)
[ 15.369] (II) No input driver specified, ignoring this device.
[ 15.369] (II) This device may have been added with another device file.
[ 15.369] (II) config/udev: Adding input device Logitech G500 (/dev/input/event0)
[ 15.369] (**) Logitech G500: Applying InputClass "evdev pointer catchall"
[ 15.369] (II) Using input driver 'evdev' for 'Logitech G500'
[ 15.369] (**) Logitech G500: always reports core events
[ 15.369] (**) evdev: Logitech G500: Device: "/dev/input/event0"
[ 15.369] (--) evdev: Logitech G500: Vendor 0x46d Product 0xc068
[ 15.369] (--) evdev: Logitech G500: Found 20 mouse buttons
[ 15.369] (--) evdev: Logitech G500: Found scroll wheel(s)
[ 15.369] (--) evdev: Logitech G500: Found relative axes
[ 15.369] (--) evdev: Logitech G500: Found x and y relative axes
[ 15.369] (II) evdev: Logitech G500: Configuring as mouse
[ 15.369] (II) evdev: Logitech G500: Adding scrollwheel support
[ 15.369] (**) evdev: Logitech G500: YAxisMapping: buttons 4 and 5
[ 15.369] (**) evdev: Logitech G500: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 15.369] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/input/input0/event0"
[ 15.369] (II) XINPUT: Adding extended input device "Logitech G500" (type: MOUSE, id 9)
[ 15.369] (II) evdev: Logitech G500: initialized for relative axes.
[ 15.369] (**) Logitech G500: (accel) keeping acceleration scheme 1
[ 15.369] (**) Logitech G500: (accel) acceleration profile 0
[ 15.370] (**) Logitech G500: (accel) acceleration factor: 2.000
[ 15.370] (**) Logitech G500: (accel) acceleration threshold: 4
[ 15.370] (II) config/udev: Adding input device Logitech G500 (/dev/input/mouse0)
[ 15.370] (II) No input driver specified, ignoring this device.
[ 15.370] (II) This device may have been added with another device file.
[ 15.370] (II) config/udev: Adding input device Logitech G500 (/dev/input/event1)
[ 15.370] (**) Logitech G500: Applying InputClass "evdev keyboard catchall"
[ 15.370] (II) Using input driver 'evdev' for 'Logitech G500'
[ 15.370] (**) Logitech G500: always reports core events
[ 15.370] (**) evdev: Logitech G500: Device: "/dev/input/event1"
[ 15.370] (--) evdev: Logitech G500: Vendor 0x46d Product 0xc068
[ 15.370] (--) evdev: Logitech G500: Found 1 mouse buttons
[ 15.370] (--) evdev: Logitech G500: Found scroll wheel(s)
[ 15.370] (--) evdev: Logitech G500: Found relative axes
[ 15.370] (II) evdev: Logitech G500: Forcing relative x/y axes to exist.
[ 15.370] (--) evdev: Logitech G500: Found absolute axes
[ 15.370] (II) evdev: Logitech G500: Forcing absolute x/y axes to exist.
[ 15.370] (--) evdev: Logitech G500: Found keys
[ 15.370] (II) evdev: Logitech G500: Configuring as mouse
[ 15.370] (II) evdev: Logitech G500: Configuring as keyboard
[ 15.370] (II) evdev: Logitech G500: Adding scrollwheel support
[ 15.370] (**) evdev: Logitech G500: YAxisMapping: buttons 4 and 5
[ 15.370] (**) evdev: Logitech G500: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 15.370] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.1/input/input1/event1"
[ 15.370] (II) XINPUT: Adding extended input device "Logitech G500" (type: KEYBOARD, id 10)
[ 15.370] (**) Option "xkb_rules" "evdev"
[ 15.370] (**) Option "xkb_model" "evdev"
[ 15.370] (**) Option "xkb_layout" "us"
[ 15.370] (II) evdev: Logitech G500: initialized for relative axes.
[ 15.370] (WW) evdev: Logitech G500: ignoring absolute axes.
[ 15.371] (**) Logitech G500: (accel) keeping acceleration scheme 1
[ 15.371] (**) Logitech G500: (accel) acceleration profile 0
[ 15.371] (**) Logitech G500: (accel) acceleration factor: 2.000
[ 15.371] (**) Logitech G500: (accel) acceleration threshold: 4
[ 15.371] (II) config/udev: Adding input device Logitech USB Multimedia Keyboard (/dev/input/event2)
[ 15.371] (**) Logitech USB Multimedia Keyboard: Applying InputClass "evdev keyboard catchall"
[ 15.371] (II) Using input driver 'evdev' for 'Logitech USB Multimedia Keyboard'
[ 15.371] (**) Logitech USB Multimedia Keyboard: always reports core events
[ 15.371] (**) evdev: Logitech USB Multimedia Keyboard: Device: "/dev/input/event2"
[ 15.371] (--) evdev: Logitech USB Multimedia Keyboard: Vendor 0x46d Product 0xc317
[ 15.371] (--) evdev: Logitech USB Multimedia Keyboard: Found keys
[ 15.371] (II) evdev: Logitech USB Multimedia Keyboard: Configuring as keyboard
[ 15.371] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.0/input/input2/event2"
[ 15.371] (II) XINPUT: Adding extended input device "Logitech USB Multimedia Keyboard" (type: KEYBOARD, id 11)
[ 15.371] (**) Option "xkb_rules" "evdev"
[ 15.371] (**) Option "xkb_model" "evdev"
[ 15.371] (**) Option "xkb_layout" "us"
[ 15.371] (II) config/udev: Adding input device Logitech USB Multimedia Keyboard (/dev/input/event3)
[ 15.371] (**) Logitech USB Multimedia Keyboard: Applying InputClass "evdev keyboard catchall"
[ 15.371] (II) Using input driver 'evdev' for 'Logitech USB Multimedia Keyboard'
[ 15.372] (**) Logitech USB Multimedia Keyboard: always reports core events
[ 15.372] (**) evdev: Logitech USB Multimedia Keyboard: Device: "/dev/input/event3"
[ 15.372] (--) evdev: Logitech USB Multimedia Keyboard: Vendor 0x46d Product 0xc317
[ 15.372] (--) evdev: Logitech USB Multimedia Keyboard: Found keys
[ 15.372] (II) evdev: Logitech USB Multimedia Keyboard: Configuring as keyboard
[ 15.372] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.1/input/input3/event3"
[ 15.372] (II) XINPUT: Adding extended input device "Logitech USB Multimedia Keyboard" (type: KEYBOARD, id 12)
[ 15.372] (**) Option "xkb_rules" "evdev"
[ 15.372] (**) Option "xkb_model" "evdev"
[ 15.372] (**) Option "xkb_layout" "us"
[ 15.372] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 15.372] (II) No input driver specified, ignoring this device.
[ 15.372] (II) This device may have been added with another device file.
[ 15.462] (II) NVIDIA(GPU-0): Display (ViewSonic VA902 (CRT-0)) does not support NVIDIA 3D
[ 15.462] (II) NVIDIA(GPU-0): Vision stereo.
[ 15.462] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 15.462] (**) NVIDIA(0): device ViewSonic VA902 (CRT-0) (Using EDID frequencies has
[ 15.462] (**) NVIDIA(0): been enabled on all display devices.)
[ 15.477] (II) NVIDIA(GPU-0): Display (AOC N19W (CRT-1)) does not support NVIDIA 3D Vision
[ 15.477] (II) NVIDIA(GPU-0): stereo.
[ 15.477] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 15.477] (**) NVIDIA(0): device AOC N19W (CRT-1) (Using EDID frequencies has been
[ 15.477] (**) NVIDIA(0): enabled on all display devices.)
[ 27.188] (II) NVIDIA(GPU-0): Display (ViewSonic VA902 (CRT-0)) does not support NVIDIA 3D
[ 27.188] (II) NVIDIA(GPU-0): Vision stereo.
[ 27.188] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 27.188] (**) NVIDIA(0): device ViewSonic VA902 (CRT-0) (Using EDID frequencies has
[ 27.188] (**) NVIDIA(0): been enabled on all display devices.)
[ 27.203] (II) NVIDIA(GPU-0): Display (AOC N19W (CRT-1)) does not support NVIDIA 3D Vision
[ 27.203] (II) NVIDIA(GPU-0): stereo.
[ 27.203] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 27.203] (**) NVIDIA(0): device AOC N19W (CRT-1) (Using EDID frequencies has been
[ 27.203] (**) NVIDIA(0): enabled on all display devices.)
[ 50.273] (II) NVIDIA(GPU-0): Display (ViewSonic VA902 (CRT-0)) does not support NVIDIA 3D
[ 50.273] (II) NVIDIA(GPU-0): Vision stereo.
[ 50.273] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 50.273] (**) NVIDIA(0): device ViewSonic VA902 (CRT-0) (Using EDID frequencies has
[ 50.273] (**) NVIDIA(0): been enabled on all display devices.)
[ 50.289] (II) NVIDIA(GPU-0): Display (AOC N19W (CRT-1)) does not support NVIDIA 3D Vision
[ 50.289] (II) NVIDIA(GPU-0): stereo.
[ 50.289] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 50.289] (**) NVIDIA(0): device AOC N19W (CRT-1) (Using EDID frequencies has been
[ 50.289] (**) NVIDIA(0): enabled on all display devices.)
[ 57.536] (II) NVIDIA(GPU-0): Display (ViewSonic VA902 (CRT-0)) does not support NVIDIA 3D
[ 57.536] (II) NVIDIA(GPU-0): Vision stereo.
[ 57.536] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 57.536] (**) NVIDIA(0): device ViewSonic VA902 (CRT-0) (Using EDID frequencies has
[ 57.536] (**) NVIDIA(0): been enabled on all display devices.)
[ 57.552] (II) NVIDIA(GPU-0): Display (AOC N19W (CRT-1)) does not support NVIDIA 3D Vision
[ 57.552] (II) NVIDIA(GPU-0): stereo.
[ 57.552] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 57.552] (**) NVIDIA(0): device AOC N19W (CRT-1) (Using EDID frequencies has been
[ 57.552] (**) NVIDIA(0): enabled on all display devices.)
Last edited by sweetthdevil (2012-07-28 13:56:48)

Right so the line in /etc/default/grub shouldn't like that?
GRUB_GFXPAYLOAD_LINUX=keep
and see below the dmesg output, I couldn't see anything wrong
Many thanks for your assistance
[ 0.208614] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.208617] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.208642] pnp 00:02: [dma 4]
[ 0.208644] pnp 00:02: [io 0x0000-0x000f]
[ 0.208645] pnp 00:02: [io 0x0081-0x0083]
[ 0.208647] pnp 00:02: [io 0x0087]
[ 0.208648] pnp 00:02: [io 0x0089-0x008b]
[ 0.208649] pnp 00:02: [io 0x008f]
[ 0.208651] pnp 00:02: [io 0x00c0-0x00df]
[ 0.208671] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.208679] pnp 00:03: [io 0x0070-0x0071]
[ 0.208686] pnp 00:03: [irq 8]
[ 0.208706] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.208712] pnp 00:04: [io 0x0061]
[ 0.208733] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.208741] pnp 00:05: [io 0x00f0-0x00ff]
[ 0.208746] pnp 00:05: [irq 13]
[ 0.208766] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.208816] pnp 00:06: [io 0x0000-0xffffffff disabled]
[ 0.208818] pnp 00:06: [io 0x0000-0xffffffff disabled]
[ 0.208820] pnp 00:06: [io 0x0290-0x029f]
[ 0.208856] system 00:06: [io 0x0290-0x029f] has been reserved
[ 0.208858] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.208937] pnp 00:07: [io 0x0010-0x001f]
[ 0.208939] pnp 00:07: [io 0x0022-0x003f]
[ 0.208940] pnp 00:07: [io 0x0044-0x004d]
[ 0.208942] pnp 00:07: [io 0x0050-0x005f]
[ 0.208943] pnp 00:07: [io 0x0062-0x0063]
[ 0.208945] pnp 00:07: [io 0x0065-0x006f]
[ 0.208946] pnp 00:07: [io 0x0072-0x007f]
[ 0.208948] pnp 00:07: [io 0x0080]
[ 0.208949] pnp 00:07: [io 0x0084-0x0086]
[ 0.208951] pnp 00:07: [io 0x0088]
[ 0.208952] pnp 00:07: [io 0x008c-0x008e]
[ 0.208954] pnp 00:07: [io 0x0090-0x009f]
[ 0.208955] pnp 00:07: [io 0x00a2-0x00bf]
[ 0.208957] pnp 00:07: [io 0x00e0-0x00ef]
[ 0.208960] pnp 00:07: [io 0x04d0-0x04d1]
[ 0.208961] pnp 00:07: [io 0x0800-0x087f]
[ 0.208963] pnp 00:07: [io 0x0400-0x03ff disabled]
[ 0.208964] pnp 00:07: [io 0x0500-0x057f]
[ 0.208966] pnp 00:07: [mem 0xfed08000-0xfed08fff]
[ 0.208968] pnp 00:07: [mem 0xfed1c000-0xfed1ffff]
[ 0.208969] pnp 00:07: [mem 0xfed20000-0xfed3ffff]
[ 0.208971] pnp 00:07: [mem 0xfed50000-0xfed8ffff]
[ 0.209028] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.209030] system 00:07: [io 0x0800-0x087f] has been reserved
[ 0.209032] system 00:07: [io 0x0500-0x057f] has been reserved
[ 0.209034] system 00:07: [mem 0xfed08000-0xfed08fff] has been reserved
[ 0.209037] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.209039] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.209041] system 00:07: [mem 0xfed50000-0xfed8ffff] has been reserved
[ 0.209043] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.209094] pnp 00:08: [mem 0xfed00000-0xfed003ff]
[ 0.209116] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.209154] pnp 00:09: [mem 0xffb00000-0xffbfffff]
[ 0.209156] pnp 00:09: [mem 0xfff00000-0xffffffff]
[ 0.209179] pnp 00:09: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.209211] pnp 00:0a: [mem 0xffc00000-0xffefffff]
[ 0.209247] system 00:0a: [mem 0xffc00000-0xffefffff] has been reserved
[ 0.209250] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.209455] pnp 00:0b: [io 0x03f8-0x03ff]
[ 0.209460] pnp 00:0b: [irq 4]
[ 0.209462] pnp 00:0b: [dma 0 disabled]
[ 0.209522] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.209605] pnp 00:0c: [io 0x0060]
[ 0.209607] pnp 00:0c: [io 0x0064]
[ 0.209609] pnp 00:0c: [mem 0xfec00000-0xfec00fff]
[ 0.209610] pnp 00:0c: [mem 0xfee00000-0xfee00fff]
[ 0.209649] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.209651] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.209654] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.209713] pnp 00:0d: [mem 0xe0000000-0xefffffff]
[ 0.209750] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.209753] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.209887] pnp 00:0e: [mem 0x00000000-0x0009ffff]
[ 0.209889] pnp 00:0e: [mem 0x000c0000-0x000cffff]
[ 0.209891] pnp 00:0e: [mem 0x000e0000-0x000fffff]
[ 0.209893] pnp 00:0e: [mem 0x00100000-0x7fffffff]
[ 0.209894] pnp 00:0e: [mem 0xe0000000-0xffffffff]
[ 0.209944] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.209947] system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.209949] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.209951] system 00:0e: [mem 0x00100000-0x7fffffff] could not be reserved
[ 0.209953] system 00:0e: [mem 0xe0000000-0xffffffff] could not be reserved
[ 0.209956] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.210071] pnp: PnP ACPI: found 15 devices
[ 0.210072] ACPI: ACPI bus type pnp unregistered
[ 0.248477] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 05-05] add_size 1000
[ 0.248480] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 05-05] add_size 400000
[ 0.248488] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04-04] add_size 200000
[ 0.248495] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03-03] add_size 200000
[ 0.248502] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02-02] add_size 200000
[ 0.248512] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000
[ 0.248514] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.248517] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.248519] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.248521] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.248525] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80000000-0x803fffff]
[ 0.248527] pci 0000:00:1c.3: BAR 15: assigned [mem 0x80400000-0x805fffff 64bit pref]
[ 0.248530] pci 0000:00:1c.4: BAR 15: assigned [mem 0x80600000-0x807fffff 64bit pref]
[ 0.248533] pci 0000:00:1c.5: BAR 15: assigned [mem 0x80800000-0x809fffff 64bit pref]
[ 0.248535] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.248538] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.248540] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
[ 0.248543] pci 0000:00:01.0: bridge window [mem 0xfc000000-0xfe8fffff]
[ 0.248546] pci 0000:00:01.0: bridge window [mem 0xd4000000-0xdfffffff 64bit pref]
[ 0.248549] pci 0000:00:1c.0: PCI bridge to [bus 05-05]
[ 0.248552] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.248555] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x803fffff]
[ 0.248559] pci 0000:00:1c.0: bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
[ 0.248564] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[ 0.248566] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
[ 0.248570] pci 0000:00:1c.3: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.248573] pci 0000:00:1c.3: bridge window [mem 0x80400000-0x805fffff 64bit pref]
[ 0.248578] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
[ 0.248581] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.248585] pci 0000:00:1c.4: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.248588] pci 0000:00:1c.4: bridge window [mem 0x80600000-0x807fffff 64bit pref]
[ 0.248593] pci 0000:00:1c.5: PCI bridge to [bus 02-02]
[ 0.248595] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
[ 0.248599] pci 0000:00:1c.5: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.248602] pci 0000:00:1c.5: bridge window [mem 0x80800000-0x809fffff 64bit pref]
[ 0.248607] pci 0000:00:1e.0: PCI bridge to [bus 06-06]
[ 0.248626] pci 0000:00:1c.0: enabling device (0106 -> 0107)
[ 0.248648] pci 0000:00:1e.0: setting latency timer to 64
[ 0.248651] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.248653] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.248656] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.248658] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.248660] pci_bus 0000:00: resource 8 [mem 0x80000000-0xdfffffff]
[ 0.248662] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xffffffff]
[ 0.248664] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
[ 0.248666] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfe8fffff]
[ 0.248668] pci_bus 0000:01: resource 2 [mem 0xd4000000-0xdfffffff 64bit pref]
[ 0.248670] pci_bus 0000:05: resource 0 [io 0x1000-0x1fff]
[ 0.248672] pci_bus 0000:05: resource 1 [mem 0x80000000-0x803fffff]
[ 0.248674] pci_bus 0000:05: resource 2 [mem 0xfaf00000-0xfaffffff 64bit pref]
[ 0.248676] pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
[ 0.248678] pci_bus 0000:04: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.248680] pci_bus 0000:04: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
[ 0.248682] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.248683] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.248685] pci_bus 0000:03: resource 2 [mem 0x80600000-0x807fffff 64bit pref]
[ 0.248687] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
[ 0.248689] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
[ 0.248691] pci_bus 0000:02: resource 2 [mem 0x80800000-0x809fffff 64bit pref]
[ 0.248693] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7]
[ 0.248695] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff]
[ 0.248697] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.248699] pci_bus 0000:06: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.248701] pci_bus 0000:06: resource 8 [mem 0x80000000-0xdfffffff]
[ 0.248702] pci_bus 0000:06: resource 9 [mem 0xf0000000-0xffffffff]
[ 0.248733] NET: Registered protocol family 2
[ 0.248778] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.248881] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.249128] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.249262] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.249264] TCP: reno registered
[ 0.249266] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.249271] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.249313] NET: Registered protocol family 1
[ 0.249482] pci 0000:01:00.0: Boot video device
[ 0.249501] PCI: CLS 32 bytes, default 64
[ 0.249536] Unpacking initramfs...
[ 0.300861] Freeing initrd memory: 2904k freed
[ 0.301793] apm: BIOS not found.
[ 0.301982] audit: initializing netlink socket (disabled)
[ 0.301994] type=2000 audit(1343559626.299:1): initialized
[ 0.302338] highmem bounce pool size: 64 pages
[ 0.302341] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.303890] VFS: Disk quotas dquot_6.5.2
[ 0.303933] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.304010] msgmni has been set to 1719
[ 0.304303] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.304360] io scheduler noop registered
[ 0.304361] io scheduler deadline registered
[ 0.304366] io scheduler cfq registered (default)
[ 0.304470] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.304536] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.304610] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
[ 0.304685] pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X
[ 0.304759] pcieport 0000:00:1c.5: irq 44 for MSI/MSI-X
[ 0.304906] intel_idle: does not run on family 6 model 23
[ 0.304923] GHES: HEST is not enabled!
[ 0.304934] isapnp: Scanning for PnP cards...
[ 0.660595] isapnp: No Plug & Play device found
[ 0.660658] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.681141] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.702001] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.702338] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.704811] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.704826] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.704932] mousedev: PS/2 mouse device common for all mice
[ 0.704977] rtc_cmos 00:03: RTC can wake from S4
[ 0.705087] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.705108] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.705131] cpuidle: using governor ladder
[ 0.705132] cpuidle: using governor menu
[ 0.705273] TCP: cubic registered
[ 0.705357] NET: Registered protocol family 10
[ 0.705507] NET: Registered protocol family 17
[ 0.705511] Registering the dns_resolver key type
[ 0.705551] Using IPI No-Shortcut mode
[ 0.705627] PM: Hibernation image not present or could not be loaded.
[ 0.705635] registered taskstats version 1
[ 0.706104] rtc_cmos 00:03: setting system clock to 2012-07-29 11:00:27 UTC (1343559627)
[ 0.706139] Initializing network drop monitor service
[ 0.706220] Freeing unused kernel memory: 524k freed
[ 0.706378] Write protecting the kernel text: 3812k
[ 0.706409] Write protecting the kernel read-only data: 1120k
[ 0.712224] systemd-udevd[50]: starting version 187
[ 0.734511] usbcore: registered new interface driver usbfs
[ 0.734527] usbcore: registered new interface driver hub
[ 0.734597] usbcore: registered new device driver usb
[ 0.735077] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.735108] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.735111] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.735129] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.735148] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.739018] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 0.739034] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfbfffc00
[ 0.739358] SCSI subsystem initialized
[ 0.740431] libata version 3.00 loaded.
[ 0.741226] ahci 0000:03:00.0: version 3.0
[ 0.741265] ahci 0000:03:00.0: JMB361 has only one port
[ 0.741273] ahci 0000:03:00.0: forcing port_map 0x3 -> 0x1
[ 0.743297] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.746687] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.747281] hub 1-0:1.0: USB hub found
[ 0.747286] hub 1-0:1.0: 6 ports detected
[ 0.747416] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.747420] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.747428] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.747450] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.751348] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.751364] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbfff800
[ 0.753538] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x1 impl SATA mode
[ 0.753541] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 0.754156] scsi0 : ahci
[ 0.754412] scsi1 : ahci
[ 0.754557] ata1: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe100 irq 16
[ 0.754559] ata2: DUMMY
[ 0.760029] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.760173] hub 2-0:1.0: USB hub found
[ 0.760176] hub 2-0:1.0: 6 ports detected
[ 0.760287] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.760292] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.760303] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.760331] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a800
[ 0.760499] hub 3-0:1.0: USB hub found
[ 0.760503] hub 3-0:1.0: 2 ports detected
[ 0.760610] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.760612] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.760620] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.760650] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a880
[ 0.760807] hub 4-0:1.0: USB hub found
[ 0.760810] hub 4-0:1.0: 2 ports detected
[ 0.760900] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 0.760902] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.760908] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.760928] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000ac00
[ 0.761054] hub 5-0:1.0: USB hub found
[ 0.761057] hub 5-0:1.0: 2 ports detected
[ 0.761136] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.761139] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.761145] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.761164] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a080
[ 0.761520] hub 6-0:1.0: USB hub found
[ 0.761525] hub 6-0:1.0: 2 ports detected
[ 0.761611] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.761614] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.761624] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.761652] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a400
[ 0.762016] hub 7-0:1.0: USB hub found
[ 0.762024] hub 7-0:1.0: 2 ports detected
[ 0.762119] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.762122] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.762128] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.762153] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a480
[ 0.762343] hub 8-0:1.0: USB hub found
[ 0.762346] hub 8-0:1.0: 2 ports detected
[ 0.762450] ata_piix 0000:00:1f.2: version 2.13
[ 0.762467] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.762507] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.763149] scsi2 : ata_piix
[ 0.763255] scsi3 : ata_piix
[ 0.764437] ata3: SATA max UDMA/133 cmd 0x9000 ctl 0x8c00 bmdma 0x8480 irq 19
[ 0.764441] ata4: SATA max UDMA/133 cmd 0x8880 ctl 0x8800 bmdma 0x8488 irq 19
[ 0.764463] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 0.764495] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 0.764712] scsi4 : ata_piix
[ 0.764793] scsi5 : ata_piix
[ 0.765583] ata5: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 19
[ 0.765587] ata6: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 19
[ 0.765646] pata_acpi 0000:03:00.1: setting latency timer to 64
[ 1.053355] usb 1-5: new high-speed USB device number 2 using ehci_hcd
[ 1.073378] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.093981] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.104642] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.303351] Refined TSC clocksource calibration: 2833.011 MHz.
[ 1.303356] Switching to clocksource tsc
[ 1.556729] ata3.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.556741] ata3.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.556931] ata4.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.556942] ata4.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.570764] ata3.00: ATA-7: WDC WD740ADFD-00NLR5, 21.07QR5, max UDMA/133
[ 1.570768] ata3.00: 145226112 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.571780] ata3.01: ATA-7: Maxtor 6V300F0, VA111900, max UDMA/133
[ 1.571783] ata3.01: 586114704 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.584089] ata3.00: configured for UDMA/133
[ 1.586888] ata4.00: HPA detected: current 312579695, native 312581808
[ 1.586893] ata4.00: ATA-7: WDC WD1600JS-00MHB0, 02.01C03, max UDMA/133
[ 1.586896] ata4.00: 312579695 sectors, multi 16: LBA48
[ 1.587075] ata4.01: ATA-7: Hitachi HDT725032VLA360, V54OA7EA, max UDMA/133
[ 1.587079] ata4.01: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.593554] ata4.00: configured for UDMA/133
[ 1.597791] ata3.01: configured for UDMA/133
[ 1.597910] scsi 2:0:0:0: Direct-Access ATA WDC WD740ADFD-00 21.0 PQ: 0 ANSI: 5
[ 1.598087] scsi 2:0:1:0: Direct-Access ATA Maxtor 6V300F0 VA11 PQ: 0 ANSI: 5
[ 1.606947] ata4.01: configured for UDMA/133
[ 1.607053] scsi 3:0:0:0: Direct-Access ATA WDC WD1600JS-00M 02.0 PQ: 0 ANSI: 5
[ 1.607253] scsi 3:0:1:0: Direct-Access ATA Hitachi HDT72503 V54O PQ: 0 ANSI: 5
[ 1.607628] pata_jmicron 0000:03:00.1: setting latency timer to 64
[ 1.607968] scsi6 : pata_jmicron
[ 1.608246] scsi7 : pata_jmicron
[ 1.608966] ata7: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 17
[ 1.608969] ata8: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 17
[ 1.612463] sd 2:0:0:0: [sda] 145226112 512-byte logical blocks: (74.3 GB/69.2 GiB)
[ 1.612493] sd 2:0:1:0: [sdb] 586114704 512-byte logical blocks: (300 GB/279 GiB)
[ 1.612514] sd 3:0:0:0: [sdc] 312579695 512-byte logical blocks: (160 GB/149 GiB)
[ 1.612551] sd 2:0:0:0: [sda] Write Protect is off
[ 1.612556] sd 3:0:1:0: [sdd] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.612559] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.612564] sd 2:0:1:0: [sdb] Write Protect is off
[ 1.612567] sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.612596] sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.612599] sd 3:0:0:0: [sdc] Write Protect is off
[ 1.612603] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.612611] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.612624] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.612639] sd 3:0:1:0: [sdd] Write Protect is off
[ 1.612641] sd 3:0:1:0: [sdd] Mode Sense: 00 3a 00 00
[ 1.612660] sd 3:0:1:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.629729] sdb: sdb1
[ 1.638871] sdd: sdd1
[ 1.639013] sdc: sdc1 sdc2 sdc3
[ 1.639240] sd 3:0:1:0: [sdd] Attached SCSI disk
[ 1.639304] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 1.645336] sda: sda1 sda2
[ 1.651080] sd 2:0:1:0: [sdb] Attached SCSI disk
[ 1.651120] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.767173] ata7.00: ATAPI: HL-DT-ST DVDRAM GSA-4167B, DL13, max UDMA/33
[ 1.780577] ata7.00: configured for UDMA/33
[ 1.789452] scsi 6:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4167B DL13 PQ: 0 ANSI: 5
[ 1.823346] usb 7-1: new full-speed USB device number 2 using uhci_hcd
[ 1.960093] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.960097] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.960396] sr 6:0:0:0: Attached scsi CD-ROM sr0
[ 2.018103] input: Logitech G500 as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/input/input0
[ 2.018180] generic-usb 0003:046D:C068.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech G500] on usb-0000:00:1d.1-1/input0
[ 2.026816] input: Logitech G500 as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.1/input/input1
[ 2.026938] generic-usb 0003:046D:C068.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [Logitech G500] on usb-0000:00:1d.1-1/input1
[ 2.026958] usbcore: registered new interface driver usbhid
[ 2.026959] usbhid: USB HID core driver
[ 2.236679] usb 7-2: new low-speed USB device number 3 using uhci_hcd
[ 2.313441] EXT4-fs (sda2): mounting ext3 file system using the ext4 subsystem
[ 2.318714] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.423066] input: Logitech USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.0/input/input2
[ 2.423132] generic-usb 0003:046D:C317.0003: input,hidraw2: USB HID v1.10 Keyboard [Logitech USB Multimedia Keyboard] on usb-0000:00:1d.1-2/input0
[ 2.461742] input: Logitech USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.1/input/input3
[ 2.461800] generic-usb 0003:046D:C317.0004: input,hidraw3: USB HID v1.10 Device [Logitech USB Multimedia Keyboard] on usb-0000:00:1d.1-2/input1
[ 3.650311] systemd-udevd[151]: starting version 187
[ 4.287002] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 4.330449] Linux agpgart interface v0.103
[ 4.391975] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
[ 4.391981] ACPI: Power Button [PWRB]
[ 4.392043] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 4.392046] ACPI: Power Button [PWRF]
[ 4.441963] iTCO_vendor_support: vendor-support=0
[ 4.442648] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 4.442734] iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0860)
[ 4.442790] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 4.497221] ACPI Warning: 0x00000400-0x0000041f SystemIO conflicts with Region \SMRG 1 (20120320/utaddress-251)
[ 4.497226] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.749531] microcode: CPU0 sig=0x1067a, pf=0x10, revision=0xa07
[ 4.784993] microcode: CPU1 sig=0x1067a, pf=0x10, revision=0xa07
[ 4.785420] microcode: CPU2 sig=0x1067a, pf=0x10, revision=0xa07
[ 4.785803] microcode: CPU3 sig=0x1067a, pf=0x10, revision=0xa07
[ 4.786231] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 5.219764] Linux media interface: v0.10
[ 5.420067] firewire_ohci 0000:04:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[ 5.593979] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 5.594571] Linux video capture interface: v2.00
[ 5.614093] nvidia: module license 'NVIDIA' taints kernel.
[ 5.614097] Disabling lock debugging due to kernel taint
[ 5.627654] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 5.627842] NVRM: loading NVIDIA UNIX x86 Kernel Module 302.17 Tue Jun 12 18:37:51 PDT 2012
[ 5.642727] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0809)
[ 5.657583] input: UVC Camera (046d:0809) as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5:1.0/input/input7
[ 5.657664] usbcore: registered new interface driver uvcvideo
[ 5.657665] USB Video Class driver (1.1.1)
[ 5.743117] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 5.743314] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 5.743414] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 5.743496] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 5.743601] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 5.744250] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 5.748503] hda_intel: Disabling MSI
[ 5.920090] firewire_core 0000:04:00.0: created device fw0: GUID 001e8c0001d58481, S400
[ 6.078944] usbcore: registered new interface driver snd-usb-audio
[ 6.260209] set resolution quirk: cval->res = 384
[ 6.610117] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input14
[ 6.610219] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input15
[ 6.610282] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input16
[ 6.610345] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input17
[ 6.839612] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 6.997988] fuse init (API version 7.18)
[ 7.318862] EXT4-fs (sdb1): warning: maximal mount count reached, running e2fsck is recommended
[ 7.319390] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 7.625490] Adding 8289504k swap on /dev/sdc1. Priority:-1 extents:1 across:8289504k
[ 9.330544] ATL1E 0000:02:00.0: irq 46 for MSI/MSI-X
[ 9.330673] ATL1E 0000:02:00.0: eth0: NIC Link is Up <100 Mbps Full Duplex>
[ 9.330749] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 9.330881] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 20.190004] eth0: no IPv6 routers present
[ 26.034112] EXT4-fs (sda2): re-mounted. Opts: commit=0
[ 26.035771] EXT4-fs (sdb1): re-mounted. Opts: commit=0

Similar Messages

"Check Video Cable" Message on HP 2311x (different issue than original post by jca93)

Hello,
Monitor Status displays:
MONITOR STATUS
DVI: No Signal
HDMI: No Signal
VGA: Active
Auto-Switch Source: Off
Default Source: VGA
Recommended Settings: 1920 x 1080 - 60 Hz
I only have VGA cables, so I do not use DVI or HDMI to connect monitor to computer. I was configuring the On-Screen Display (OSD) when I accidently went into Source Control Options and changed the video source from VGA to HDMI (or DVI, whichever one is placed directly above VGA).
By default, auto-switch should be on, but I turned it off a month prior. Computer is not affected, only monitor. I have tried to access the Source Control Options, but the OSD does not pop up.
My question is: is it possible to fix this issue, error without purchasing the other 2 types of cables? Is it possible to open up the OSD?
Help from an HP Expert or the community will be much appreciated. If you need me to provide more information, I will be happy to comply.
This question was solved.
View Solution.

Please try performing a hard reset on your 2311x monitor;
1. Disconnect the power cord from the monitor.
2. Hold down the power button for 30 seconds.
3. Plug the power cord back into pc.
This should clear your current video source issue and your OSD issue by returning the settings to factory.
Please send KUDOs
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Safari displays a very different website than others

We have one workstation in our workgroup that all of a sudden (last Friday) when you go to "Underground Weather" [www.wunderground.com], it goes to some generic worthless site instead of the real site. All other computers on the network will go to the proper site. Typing the URL in doesn't work either, it just pops back the this awful place. Tried cleaning out the cashe, cookies, pop-ups, and re-set Safari with no luck.
Any Ideas?
Thanks
Mac G4 10.4, Safari 2.0.3

When you had this problem, did the bogus site look like a shopping site? Tag line something like "Weather Service... what you want when you want it"?
If the problem returns, while you're looking at the bogus site, open View> View Source and see if it looks different than your other machines looking at the same site.
My mac has been occasionally doing something similar since it was new (August) and I'm hoping someone can figure out the problem.

ITunes will not open-- different problem than others here...

I just purchased the iPod video and I went to apple.com to install the latest version. I went through all the standard prompts as usual. Finally, I get the message that i have downloaded successfully. I got to the iTunes icon on my desktop and after clicking, nothing happens. I get the hourglass and that's it. I've tried rebooting with no change. I even called the Applecare hotline to figure this out. The operator had me to uninstall and install iTunes again. Same thing happened and she was stumped. She told me to come here and ask someone what the problem could be. This is not my first iPod (i have the ipod photo) so I have a general idea of how this thing works. Just can't open the dadburn iTunes!!! I have all my music backed up on an external hard drive so i know my music is somewhere in pc limbo. Help me please!! Oh, and I do have Norton security if that makes much of a difference. Sorry for being so long winded.
Windows XP
Windows XP

Not sure if you've seen these, but they might help:
iTunes for Windows won't open if firewall software is not up-to-date
http://docs.info.apple.com/article.html?artnum=302775
iTunes for Windows doesn't open after upgrading
http://docs.info.apple.com/article.html?artnum=302386
How to recreate your iTunes Library (if there is a corrupt iTunes library file, this could help iTunes open correctly)
http://docs.info.apple.com/article.html?artnum=93313
Using MSCONFIG to troubleshoot conflicts in Windows
http://docs.info.apple.com/article.html?artnum=302538
It's a lot to shuffle through, but definitely worth it. You also may want to try, if available, to sign onto another XP user account and see if the same symptoms exist. This way you'll know if it's a more user-specific issue or if it's something system-wide. If you don't have another user, temporarily create one (with admin abilities, preferably), and give iTunes a go.
Hope this helps =) Let me know how everything goes.

Make hyperlink different color than others on page

I want to make a text hyperlink (in Comic Sans) white in all of its states while leaving the rest of the text links on the page the default blue. In Site Properties, I created a text hyperlink called FIND OUT MORE! making all states white, and bold text, but when clicking OK, nothing applies or changes for the text selected - still default blue. See image - want to change the hyperlinked text in the black box to white. Is this possible?
Thank you!

I seemed to have solved this issue by ignoring the text within the box and making a hyperlink for the box which includes the text in the hyperlink. I didn't bother changing or deleting the hyperlink setting I created in Site Properties, though I don't think it has any bearing.

Changing Users Name - different from the other post below

I want to change my home name under the places folder. It's not my account name that can be viewed in the preferences under account. When I got this new MacBook Pro and went thru the set up, somehow I must have agreed to use the name that is next to the house icon under places in the finder sidebar. I really don't know where they got it from and when I search the whole computer all that comes up is the user folder. I tried to rename the name but it won't let me. There has to be somewhere I can change that name short of clearing out the contents of the MacBook and loading a new system from the supplied start up disk.

Hi,
Just to amplify -
An account actually has two names, the "long name" (now called "Full Name" in System Preferences), and the ""short name" (normally a single word in lower case, called "Account Name" in System Preferences when you first set up an account).
When you set up a user account and enter your "Full Name," the system will suggest an Account Name (the "short name"), and you have *just this one chance* to change it:
Once set, the short name becomes the name of your home folder (the house icon in Finder) and is not easily changed. You can't just change the home folder name, because the short name is also an intrinsic part of your user account. However if you very much want to change the short name, there are a few ways to do this. Apple's method is here:
*Mac OS X: How to change user short name or home directory name*
http://support.apple.com/kb/HT1428?viewlocale=en_US
It's somewhat complicated as you will see, and changing the short name this way can sometimes introduce a few permissions glitches. You could still try it, or since your Mac is still new, you might instead consider wiping the HD and starting over.

X230 won't wake up from hibernation-- different issue from x1 post

only got my x230 last week, the same problem has happened twice.
I put my laptop into hibernation mode, when I turned it back on, it led to a black screen. it seems like it's running (with the green light for the wifi and power being on) and when i clicked on the space bar, it makes a noise
but nothing happened even after 10 minutes.-- the screen stays black.
the first time i did a hard shut down and when i restarted, i run into some kind of window update errors
is it a defect item? can i get it exchange?

So, do I understand that you want to physically remove the hard drive to retreive your files?
What is the model number of your computer? HP might have a document for your model that gives detailed instructions for removing the hard drive.
GeorgeFN
I work on behalf of HP.

Moveing average price after posting invoice with different value than GR

Hello all
I have a question as in subject.
If I will post goods receipt and after this I would like to post an invoice in MIRO with different value than in goods receipt , the MAP on my stock will change about this different???

Hi,
Your MAP will get recalculated as the price difference will change the total value of the stock and the stock quantity will remain the same
MAP=Total value/Total stock
Hope this will help you
Reward if useful
Thanx and Regards
SHYAM.R

How can I make a link a different color than the other links according to the current page?

Hello. I have created a navigation bar. And I would like to style the links to have the current page link a different color than the other links. For example, if all of the links have a black background, I would like to have the current page link to have a white background. The reason that I would like to style them this way is so that the visitor knows what page is being visitied.
I tried different ways but all of them did not show to make any change to the links. This is what I have so far. The links work, but all of them have the same color and background. When on the home page, I would like to have the home page link to have a white background with black letters. I would appreciate your advice.
<head>
ul {
    list-style-type: none;
    text-align: right;
    padding-top: 10px;
    padding-bottom: 6px;
    padding-right: 10px;
li {
    display: inline;
a:link {
    color: #FFF;
    background-color: #000;
    text-align: center;
    padding-top: 8px;
    padding-right: 8px;
    padding-bottom: 8px;
    padding-left: 7px;
    text-decoration: none;
a:visited {
    color: #FFF;
    background-color: #000;
    text-decoration: none;
a:hover {
    color: #000;
    background-color: #FFF;
    text-decoration: none;
a:active {
    color: #FFF;
    background-color: #000;
    text-decoration: none;
a.menu:link {
     color: #000
     background-color: #FFF;
     text-decoration: none;
</head>
<body>
<div class="navigation">
    <ul>
        <li class="menu"><a href="index.html" target="_self">HOME</a></li>
</body>
Thank you very much.

http://www.itworld.com/development/351097/setting-active-menu-item-based-current-url-jquer y

Uploading issues to other providers than .mac

has anyone had uploading issues to other providers than .mac??

can the names of the pages have spaces in them, or do
i have to change both the file name and the name of
the page?
As the note says, some servers will let you upload files with spaces in their names, and some will not. Names without spaces will always work.
In iWeb, the name you give to a site or page is the same as the name of the folder or file associated with it. So to avoid spaces in folder or file names, you need to omit them in the site and page names, or replace by hyphen or underscore.

Is iPad 3G infrastructure different than other 3Gs?

Hi,
Mobile service providers offer cheaper 3G packets with 3G mobile usb modems in Turkey as campaigns.
I called their customer service and asked "may i get the sim out from usb 3G modem, crop it to make micro sim with scissors and use it on the iPad 1?" and the support staff replied "you can do it but if you do your data transfer will use different infrastructure than the modem and you'll be charged out of the packet.". Packet limit is 1Gb/mo.
Is that answer valid? I mean they'd do anything to get our money, especially in Turkey. I suspect they try to trick me.
Is there any difference with ipad 3g infrastructure and 3g usb modems?

yes the ipad2 verison model is cdma which is a different tech then gsm and don't use sims
and is not widely supported around the world
so get the att model

I've read others' posts on this issue and still need an answer that works. Safari keeps dropping wireless; no issues on a Dell laptop with XP in same room. Cleared cache, etc. - any other ideas?

I've read others' posts on this issue and still don't have an answer that works! Safari keeps dropping wireless connection every 5 - 10 minutes (it's gotten progressively worse over the last month). My husband, sitting 10 ft across from me, has no issues on a Dell laptop with XP so doesn't appear to be the router or ISP. Safari v5.0.6 Mac OS 10.5.8. Cleared cache, tried kill commands in Terminal, restarts, etc. Only restarting seems to keep it at bay for a period, but then it will start again. Any other ideas?

You posted a question about a problem connecting a Mac to a wireless router. You have an old Dell laptop that works well with that router.
I pointed you to a brief discussion with another poster who had a problem connecting a Mac to a wireless router. He had an old Dell laptop that worked well with that router. I suggested he upgrade the router firmware. He upgraded it, and the problem was solved. Another poster in that thread did the same thing, and his problem was also solved. Within the last day or two, I made the same suggestion to a third poster in another thread, and his problem was solved too.
Conclusion: Upgrading the router firmware helps sometimes.
If I understand your response, you think that checking for a firmware update isn't even worth a try. Am I missing something?

HT5538 My boss has an IPhone from a different carrier than my iPhone. I want to set up iMessage so we can text each other for free. Is that possible? If so, what do I do to my phone and/or hers to set it up?

My boss has an IPhone from a different carrier than my iPhone. I want to set up iMessage so we can text each other for free. Is that possible? If so, what do I do to my phone and/or hers to set it up?

Just turn on iMessage... Settings > Messsages > iMessage > On
Note that iMessage uses data (very small amount) so you need a cellular data (3G/4G) or wifi connection for iMessagae to work. Also, in the Messages app, iMessages are blue and standard text messages are green.

Ipod Touch Recognition Problems...***Different Than Others***

I have seen a bunch of other posts similar to the problem i have but i wanted to post one specifically with my problem.
Ok, when i plug my ipod in it starts to charge like it should and itunes opens up, like it should...But my ipod doesn't show up in itunes and it doesn't show up in My Computer. If anyone can help me with my situation it would be much appreciated. I just want my baby back!

I had the same problem with my iPhone with iTunes 7 and I solved it up by installing iTunes 8.
If your problem remains, you can use an alternative iPod Touch manager such as the one I used before iTunes 8 was released: CopyTrans Manager http://www.copytrans.net/manager.php

Booting into empty grub prompt and slow GDM

Hello,
I haven't performed update for long time and I did last day. I had issues related to /sbin exists etc which I have resolved by following the instructions posted in the Arch linux website. However after a successful update, I have the following issues.
(1) - When I log in back, it puts me into an empty grub prompt. I figured out that pacman changed menu.lst to menu.lst.pacsave. So from the grub prompt, I did
configfile /grub/menu.lst.pacsave
and I got the arch linux boot screen.
(2) - It started booting and loaded GDM with the login screen. Login and key strokes are very slow here. Even after login, I don't see GNOME shell. I don't see any errors while booting.
Any help to fix these issues would be good.
Cheers
Navaneeth

What exactly did you do when following the instructions? That is, following them is good, but it would be better if people could make sure there was no misunderstanding which might be causing issues.
You need to go back further through the news as you have evidently ignored various changes to Arch.
For example, legacy grub has not been in the official repos for some time. When you updated, grub2 (which is now called grub) replaced grub (legacy). Hence the pacsave. But you still have grub legacy installed as your boot loader. If you want to keep using it, install the AUR package which has been updated to work with the new filesystem package. Otherwise, configure and install grub (i.e. grub2) or install an alternative such as syslinux.
You are likely to have other pacnew and pacsave files. You need to look through pacman's output (/var/log/pacman.log) and follow the instructions there to ensure that your system is properly configured in light of the updates.
Arch is meant to be updated frequently. If that isn't an option, you would be better served by a different distro.

Slow GDM - different issues than other posts

Similar Messages

Maybe you are looking for