Slow Graphics in Reports 10g?

Hi
we are currently building a massprinting engine based on the oracle 10 Reports server.
Now we have the following problem:
Building a normal report without any graphics on it takes under normal conditions not more than 2 seconds.
Based on the same report, we added a graphic on it. a simple pie chart.
NOW IT TAKES 20 seconds to generate that report. This is an impossible time for MASSPRINTING. Now it takes 15 days for our planned massprinting (or better massreporting).
Any ideas or experiences about that problem????
Thanks anyway.

Hi,
It is difficult to pin-point the problem without looking at the report and your environment. As I said, it may depend on how many "data points" are you trying to plot on the graph. For example, if there are 1,000 data points (slices in your pie chart), the performance will be slow.
One may need to test the performance on other output formats like HTML, RTF, etc. Then one can say whether this is an engine formatting problem, data fetching problem or PDF outupt problem.
What I would suggest is that you open a Service Request with Oracle Support, who can then get more insight into the problem and advise you accordingly.
Navneet.

Similar Messages

  • How to add Oracle Graphics 6i charts (OGD) to my Oracle Reports 10g

    Hi,
    Is there any possibility to add Oracle Graphics 6i Charts (.OGD) to Oracle Reports 10g
    (OR)
    If not possible, Can you please provide steps to migrate OGD to any format that is supported in Oracle Reports 10g.
    Regards,
    Swethan

    Oracle Graphics and its OGD image format are no longer supported. Reports built with previous versions of Oracle Reports containing Oracle Graphics charts will continue to run in Oracle Reports 10g Release 2 (10.1.2) if the Oracle Graphics 6i runtime is installed on the same machine in a separate ORACLE_HOME. However, this is not a supported configuration, and Oracle will not fix bugs that result from this configuration.
    Re-create all Oracle Graphics 6i objects using the Graph Wizard

  • Migrating Graphs from Reports 6i to Reports 10g

    While migrating Graphs from Reports 6i to Reports 10g is there a possibility of maintaining the same graphs rather than recompiling them using the Graph Wizard of Reports 10g. I have hundreds of reports with graphs and will be an uphill task to re-draft all the graphs. Kindly suggest alternatives to overcome this dead-lock.
    Thanx in advance
    Sridhar

    Hello Sridhar,
    10g is not supporting Graphics builder. So you got to create/insert all these 6i graphs in 10g. Open the 6i report and compile in 10g. It will give you file not found error. Delete the graph area in the layout editor.
    Then drag the chart icon and drop in layout. Redesign again. Offcourse it is not fun. But there is no way.
    Also there are tons of bugs in 10g report Graphs. You won't find some cool features like Others % option in the pie slice provided by Graphics bulider. You got to change graph.xml file for some of the features. Even the graphs looks ugly in 10g. Migrating graph reports is really frustrating in 10g. But we have no choice. Recently we migrated to 10g. Becareful with matrix reports. 10g keeps on getting crashed when ever we develop matrix report. GOD knows the reason.
    But 10g has some very very good features like Distribution
    Cheers.
    Ram.

  • Running Reports 10g on Apps Server

    We have a Windows 2003 apps server running Oracle Forms and Reports 10g.
    We are having a problem running reports in Oracle 10g, and believe it to be something to do with the configuration files. Currently, we can run the test report through Enterprise Manager using both the default reports service and the one that we have created. However we are unable to run our own reports through forms.
    To check that there was nothing wrong with our forms, we copied one of the reports into the …\forms10g\reports\samples\demo folder to see if we could run it through Enterprise Manager. However, we get the following error:
    Rep-110: Unable to open file ……
    Rep-1070: Error while opening or saving a document.
    Rep-0110: Unable to open file …...
    We then renamed the test.rdf file and tried to run that. Again we got the above message. Next we tried again to run test.rdf, even though this no longer existed, and the report ran. This implied that it isn't actually running the report, but has the report output stored somewhere, and it just displays this.
    No matter how we try to run reports, and with which reports service, we always get the above error.
    So why is it that no reports will run, not even the test one when it is renamed? Is there a configuration setting somewhere?

    Hi All,
    Hope YOu are fine.
    We have running Oracle Forms and Reports Services 10g on Windows 2000 Advanced Server.
    The Application Works fine, and reports are generated successfully.
    But when we access the same application by using either Linux OS (RHEL 4.0, Ubuntu 6),
    The forms works fine but Linux OS could not run the report.
    This seems to be a configuration problem.
    Any Clues.
    Thanks and Looking Forward.
    Aamer Javaid
    [email protected]

  • Formula Columns are not working in Reports 10g

    Hi,
    We converted the reports developed in Reports 6i to Reports 10g. When we run the report in Reports 10g Builder everything works fine. But when we deploy the same report in Oracle Application Server and invoking the report the formula columns are not working ie., the fields/ placeholder columns which are based on the formula column are not displaying any values in the report.
    Please, someone help us in this regard.
    Thanks & Rgds,
    M T

    What version of Reports do you use..???
    Greetings...

  • Image_Item not working in Reports 10g

    we can't use ImageItems in our report.
    we had a table with some images in a column with Datatype Longraw. Because we can't use that with Forms/reports 10g, we cahnged the Table-Column to Blob and migrated the Data with Import/Export. Within Forms we don't have any problem, we can display the old migrated pictures, we can import new images with Webutils Client_Image.Read_Image_Item and we can display those new images as well.
    But now we have a problem with Reports. Our Report has an item (the new Blob_Column) in the query and that item is displayed within the report. If the Report is run for a record with a migrated Image, it works fine, but with a new Record and a new imported Image_Item, the Report fails (on the Server) with the following information in EM :
    Mit Fehler beendet: REP-69: Interner Fehler REP-62203: Interner Fehler beim Lesen des Bildes - Unable to render RenderedOp for this operation..
    it is a very small Report but with 2 images (both are small).
    Any ideas out there ?
    regards,
    Mark

    Found the solution by myself.
    The Problem isn't within Reports it is within Forms. The Image_Item has to set to FileType "BMP" instead of "JFIF".
    That solved the problem.

  • Report 6i and Report 10g together in a system

    Hi,
    Is it create any problem if I installed both Report 6i and Report 10g in
    a system having 10g database.
    What are possible problem that will have to face?

    Hi,
    There won't be any issues. We are using both in our development machines. You must make sure the tnsnames.ora has correct entries.
    Regards,
    Manu.

  • Suppressing a warning message in reports 10g

    Hi All,
    I am getting REP-32751: Warning: Some text segments are missing warning message when ever i open a report and also while run the report in the browser. I am not able to find the missing text segments. Is there any way to suppress this warning message in oracle reports 10g?. Please let me know.
    Regards,
    Prasad.

    probably best to post this in the reports forum

  • Issue with Oracle Report 10g output

    I want to generate text output in Oracle Reports 10g. I am using paper layout.Length of the fields want to print is 750. Each line is broken in the output after 120 characters length apporx. Please let me know if there is any way to print complete 750 characters.

    Sample output is coming as below :
    T2013 56600084112345                                                                                         FPWC
                                                                           955 OLD WILMINGTON RD                   FAYETTEVILLE
         CUMBERLAND                 NC28301                   00000001CONTACT TESING                          1234567890
                    00000001          I'
    I want it to be discplayed in single line instead of breaking.

  • 4 PDF reports from Single report in reports 10G

    Hi All,
    i want to generate 4 PDF report from one oracle report in reports 10G.
    from the same query i want to generate 4 PDF with different order and result set based upon the query parameter at a single time.
    exp: query fetch Some eng/spanish provider and client data. requirement is i want to spilt into 4 PDF:
    Provider wise Eng.
    Provider wise spanish.
    Client wise english.
    Client wise spanish.
    Can anybody please help on this?
    Regards
    Abhishek

    Hi All,
    i am generating 4 PDF reports from one Oracle reports in 10 G.
    i used RUN_REPORT_OBJECT built in 4 times with some different parameter list at a single time.
    some time it generates but some time it generate 2 or 3 out of 4.
    Can you anyone help me on this issue.
    Regards,
    Abhishek
    Edited by: user651239 on Sep 22, 2008 10:16 PM

  • XML Publisher is not integrating with Reports 10g Concurrent program

    Hello,
    I created report in reports 10g. Saved report in the custom_top/reports/US. Created a concurrent program for the report with output as XML. Created a Data Definition with the same short name as the concurrent program and created a template used the same short name as the Data Definition, associated template with the data definition. Uploaded the .rtf file to the template.
    The issue i have is when i run the concurrent program the output is xml tags rather than the xml publisher report.
    Any help will be appreciated.

    | Starting concurrent program execution...
    +-----------------------------
    Arguments
    P_Start_Date='01-JAN-11'
    P_end_Date='15-AUG-11'
    Forcing NLS_NUMERIC_CHARACTERS to: '.,' for XDO processing
    APPLLCSP Environment Variable set to :
    Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
    American_America.AL32UTF8
    Enter Password:
    Report Builder: Release 10.1.2.3.0 - Production on Wed Aug 24 09:25:14 2011
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    Start of log messages from FND_FILE
    End of log messages from FND_FILE

  • Need help with Oracle reports 10g

    Hi
    we have a requirement in a oracle 10g application
    this application is on the unix server
    the requirement is such that the user must be able to print a report directly to the default printer
    when the user clicks on the button a report must be printed on the users default printer
    can u help us understand that how can we configure the local printer of the user on the unix server?

    hi, piyush9010
    Check this following link...
    Oracle reports 10g output directly to printer
    Oracle reports 10g output directly to printer
    Make your printer as shared printer then try.
    Use DESTYPE=PRINTER.
    http://qamarsyed.blogspot.com/2011/02/how-to-print-oracle-report-to-network.html
    http://docs.oracle.com/cd/E14571_01/bi.1111/b32121/pbr_cla005.htm#i637246
    Hope this helps
    If someone's response is helpful or correct, please mark it accordingly.

  • How do I repeat the same row more than once in report 10g

    How do I repeat the same row more than once in report 10g
    So I can print the bar code more than once
    in report;
    Edited by: user11106555 on May 9, 2009 5:50 AM

    GREAT THAN X MAN
    It is already working, but with the first ROW
    select ename from emp
    CONNECT BY ROWNUM<=5
    ENAME
    SMITH
    SMITH
    SMITH
    SMITH
    SMITH
    ALLEN
    WARD
    JONES
    MARTIN
    BLAKE
    CLARK
    SCOTT
    KING
    TURNER
    ADAMS
    JAMES
    FORD
    MILLER
    BUT I want this result
    Item1
    Item2
    Item3
    to
    Item1
    Item1
    Item1
    Item2
    Item2
    Item2
    Item3
    Item3
    Item3

  • How to call a Report 10g from a parameter form..?

    Hello,
    pls i wanna know the procedure of :
    How to call a Report 10g from a parameter form..?
    regards,
    Abdetu..

    hopes it work for you.
    procedure get_report is
    pl_id paramlist;
    p_year varchar2(4);
    param_name varchar2(10) :'param';
    begin
    pl_id := get_parameter_list(param_name);
    if not id_null(pl_id_)then
    destroy_parameter_list(pl_id);
    end if;
    pl_id := create_parameter_list(param_name);
    p_year := year -- assign the value.
    add_parameter(pl_id,'p_year',text_parameter,p_year);
    execute_report('report_name',pl_id);
    end;

  • T520 - 42435gg / Sound stutter and slow Graphic performance with Intel Rapid Storage AHCI Driver

    Hi everybody,
    I have serious Problems with my 42435gg
    Any time I install the Intel Storage AHCI Driver (I've tried plenty of different versions) which is suggested by System Update I experience a horrible Sound stutter and slow Graphic performance in Windows 7 64-Bit.
    The funny thing in this case: If the external e-sata port is connected the problems do not occur. If the port is unused again, the stutter begins immediately.
    The only thing I can do is using the Windows internal Storage Driver with which I am not able to use my DVD recorder for example.
    The device was sent to lenovo for hardware testing with no result. It was sent back without any repairing.
    Anybody experience on this?
    Kind regards,
    Daniel

    Did you try the 11.5 RST beta? Load up DPClat and see if DPC conditions are favorable.
    What are you using to check graphics performance?
    W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
    X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
    Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Maybe you are looking for

  • Data Execution Protection

    I have just installed iTunes On my Windows based XP (SP3) HP lap-top, but I can not launch it. Every time it comes up with DEP has closed this program. I have tried all the suggestions. Uninstalling everything and re-install iTunes. Create another us

  • Why does some text disappear in Design View?

    Hi, I've had a website for about six years. On my Windows XP computer I used Dreamweaver 8 with minimal problems. When I upgraded to Windows 7 last spring, I bought Dreamweaver CS5. I've had a lot of problems since then. Here's the latest and most se

  • Hi :) help me please

    I forgot my password for iCloud Forgot your registered e-mail address phone is locked Please send them to e-mail me about this topic

  • Cannot burn DVD in Premier Elements 10 longer than 1 hour in Length

    I cannot figure out why I have to limit my DVD projects to no more than 1 hour in PE 10.  As long as I keep the timeline to 1 hour or less, the DVD burns just fine.  If I try a project over 1 hour - 1 hour, 10 minutes for example - it compiles everyt

  • Does tungsten e2 work with windows 8

    let me know