Slow GUI response time on 680

I just bought a new unlocked 680 to replace my old 650. I followed all the instructions to update Palm Desktop and sync'd my old data onto the new device. My first impressions are that the phone is good. However, I have noticed that the response time can be slow. For example, when using the navigation keypad in the main Apps screen it will get stuck for a second or so and then catch up. Also, the response in the Contacts can be noticeably slow.
Is this "normal" or is there something wrong that needs fixing?
Thanks,
-Computerguy
Post relates to:

sluggishness of the device can be attributed to the number of files and applications on it.
how slow is the response you mentioned? can you please state the time before an application opened?
if it's going to take more than 10 secs then that could an issue with your apps and data.
try soft reset and verify response again.
if it's still the same, there is a need for you to do a hard reset.
once your done with the hard reset, try your tapping the onboard apps and observe the response before doing any hotsync. try to see if it's still behaving the same.
if it is still showing the same behavior. your device is defective so you have to send back for replacement from the store.
if the device functions ok after the hard reset, you need to rename the backup folder in the username folder before doing any hotsync.
this way, you are taking away 3rd party apps when doing the hotsync. then observe the device.
if you have 3rd party apps that you need, you can install it again 1 by 1. if it's just PRC and PDB files, you can just go back to the renamed backup folder and drag them to the install tool then hotsync.
it those are exe files, you really need to reinstall it again and then sync.

Similar Messages

Will the problems I am having with slow Safari response times continue if I port the image of my 4 to an new iphone 5?

As in many families, I am ready to upgrade my iphone 4 to a 5 and pass on my 4 to my partner (who has my old 3), BUT I am resistant to do so because I have been having problems with Safari, (very slow response time) ever since I upgraded to the new OS a month or so back. I have completed all the cleaning tips (cookies, individual app shut downs) and hard boot steps with no change. I can sit my partners Iphone 3 next to my 4 and when using Safari it beats it hands down, almost doubling the time it takes on the 3. My 4 is quicker on all the other apps so I don't believe it is a hardware issue. My tests were done using our home wi fi set up the same on both phones after running all the cleaning tips on both.
I actually broke down and called the support line and the first level support told me if I upgraded to the 5 I would likely carry the problem to the new phone. She said she suspected malware or a virus and that for $300 she could forward me to second level support that could scan my phone and see what the problem is on my 4 and support any issues on a new iphone 5 OR for a one time lower fee $79, just help me fix my 4.
Thinking through her options, I chose none of the above. Seems like I should be able to either 1) isolate the issue myself with the help of this forum or 2) upgrade to the iphone 5 and if the problem follows to the new one, get the support via the new device warranty. If the support person is correct and the problem is in the software and would follow the device, then in theroy I could wipe and restore my old 4 with the back up/data of my partners 3 and the problem on the 4 should be resolved.
I really don't want to carry the problem to a new phone if I can fix the issue first. I have airwatch software to push my work email to my phone and that is usually a pain to do when I upgrade anyhow. I don't need to pay for a new phone that has the same problem as my old one. I will get grief from my partner for passing on an issue that will come up with the daily use of the old iphone 4 that I will be responsible to fix anyhow. I have invested too much time already to generate problems on both our phones. Thanks in advance for any tips or guideance about a streamlined way forward.

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Has any of this been tried?
FYI, there are no viruses that affect iOS unless the device has been hacked or jailbroken, in which case they cannot be discussed here.

Harmony One Slow Key Response Time

I've posted about this in the Logitech forums, but haven't had much success. I use my Harmony One to control my Apple TV 2, however the response time of the Apple TV after pressing a key on the remote is slow. It seems to take about 1 second between button presses for the Apple TV to respond. This makes it almost unusable as entering a movie name into a search field, etc. takes substantially longer than when I was using the original Apple TV remote.
I've tried changing the inter-key delay from 500 MS to 100 MS and then 0 MS but this doesn't seem to fix the problem. I've seen multiple posts on various forums about this issue but I've yet to find a repair. I know that many people use Harmony One remotes to control their Apple TV's so I'm hoping someone out there has figured out this annoying issue!

My Harmony One also works perfectly well with the ATV2.
What type of device have you defined the AppleTV in the, oh so wonderful Logitech software?
I previously had mine defined as a Mac Mini (when I used Front Row on my TV). All I did when I changed over to the ATV2 was rename it to AppleTV in activities. Under the hood in the Logitech software it's still defined as a Mac Mini.

Home hub 5 slow ping response times on wireless

Ive recently had Infinity installed after being with plusnet for 2 years and having infinity before that. I was having some slow ups on wireless, nothing very drastic but enough for me to know something wasnt quite right.
When I run a constant ping to the home hub or any other device on the network from a device thats on the wireless I get about 10 good pings (around 2 or 3 ms) and then 4 bad pings ranging from 180ms - 500ms. Also get the odd ping that does not respond. For basic neowsing you would probably not notice but for an advanced user its frustrating. BT are sending a new Hub out but I'm wondering if this is a fault on all hub 5's. Has anyone lese noticed this? Can anyone else give it a go and set a constant ping off to the hun over wireless please and report back?
For info I have tried all the different settings, channels, ghz etc.
Thanks

esmewk wrote:
Are you sure your wireless card is connecting on 5GHz? I had to manually set mine to connect to 5GHz or else it'd try and connect on 2.4GHz.
Yes it's definately connecting at 5ghz i'm even forcing it with the device,i'm getting a link speed of 433 mbp/s so it's defo 5ghz i'm noticing strange bursts of speed when using the speedtest app ie downloads fast for a split second then stops and so on and so on,same with upload it's dropped from 18-19 mb/s to 9-10 mb/s and strange bursts of start stop,i've rebooted the hub a few times now,i'm still using the open reach modem as opposed to the inbuilt one of the HH5 for cabling reasons.

Slow HTTPs response time through CSS after applying KB2585542 to windows client

Anyone else having issues with HTTPS sites being very slow after applying KB2585542? Once you remove this Microsoft patch everything returns to normal. It appears that the CSS does not handle the split-ssl requests properly. I have opened a TAC case but am not really getting anywhere as we seem to be the only company that is having this issue.
Thanks,
Jim

A few more details about this patch from Microsoft:
Details about this security patch:
http://support.microsoft.com/kb/2585542
RFC's
Application can handle Fragmentation of SSL/TLS application records, as described in the following RFC’s:
TLS 1.0: http://www.ietf.org/rfc/rfc2246.txt paragraph 6.2.1
SSL 3.0 http://www.ietf.org/rfc/rfc6101 paragraph 5.2.1

Slow sampling rate = slow button response time

(Disclaimer: I am a labview novice)
I am writing a VI that acquires data from 2 sources - one via serial communication (VISA) and one via DAQmx (simple voltage measurement).
Currently, our sampling rate is 0.2 Hz (one sample per 5 seconds), which I am setting using Time Delay.vi within block structures (see screenshot). The data is being recorded satisfactorily, however when I press any button, such as the clear button (clears chart history), the stop button, or the record button (starts/stops writing to measurement file, not shown in screenshot), the button state change does not register until the next sample is recorded. The result is a delay of up to five seconds for any action I take. This is a minor inconvenience, but we would like to change our sample rate to 1/60 Hz, which will lead to up to a 60 second delay before any actions taken are registered.
Block diagram attached. I have removed all but the key functionality of the program in order to make it more readable. Does anyone have any suggestions on how to fix this problem? Any advice or suggestions are welcome, as I am new to Labview.
Thank you very much. Screenshot attached.
Attachments:
labview VI streamlined.JPG ‏222 KB

One option for you is to put your user feedback (Clear Chart...) into a parallel loop that holds an event structure. When the user triggers an event, by pressing a button in this case, that even will execute immediately. Look in the LabVIEW help for info on Event Structures, it is well documented there.
CLA, CLED, CTD,CPI, LabVIEW Champion
Platinum Alliance Partner
Senior Engineer
Using LV 2013, 2012
Don't forget Kudos for Good Answers, and Mark a solution if your problem is solved.

BAD_POOL_CALLER/Slow disk response times

Whenever I restart my laptop to install updates I geta bad pool caller error and have to refresh the laptop. The only thing I have plugged in (apart from the power cable) is a USB mouse and the only thing I have installed is Firefox. For an hour
or so after it finishes refreshing I have disk response rates varying from 3000-13000 ms, although it goes down to under 1000ms.
Screenshot of task manager showing disk use: http://i.imgur.com/nxwrWqL.png

it looks like Avast (aswSP.SYS) is the cause:
BAD_POOL_CALLER (c2)
The current thread is making a bad pool request. Typically this is at a bad IRQL level or double freeing the same allocation, etc.
Arguments:
Arg1: 00000000, The caller is requesting a zero byte pool allocation.
Arg2: 00000000, zero.
Arg3: 00000001, the pool type being allocated.
Arg4: 6e557641, the pool tag being used.
Debugging Details:
BUGCHECK_STR: 0xc2_0
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: explorer.exe
CURRENT_IRQL: 0
LAST_CONTROL_TRANSFER: from 81e4f05d to 81e25b98
STACK_TEXT:
nt!KeBugCheckEx
nt!ExAllocatePoolWithTag
WARNING: Stack unwind information not available. Following frames may be wrong.
aswSP
SYMBOL_NAME: aswSP+2caf3
Image path: \SystemRoot\System32\Drivers\aswSP.SYS
Image name: aswSP.SYS
Timestamp: Tue Oct 30 23:43:45 2012
So update Avast or uninstall it, if there is no Windows 8 compatible version.
btw, why do you use the checked Build (Built by: 9200.16384.x86chk.win8_rtm.120725-1247)?
"A programmer is just a tool which converts caffeine into code"

Slow query response time

Morning SQL gurus,
Running queries on APEX takes very long compared to running the script directly on the database.
I tried setting optimizer mode to all_rows, used driving_site and index hints, any other suggestions? The scripts on Apex and DB make use of a db :-/
Regards,
Pirate
Edited by: Pirate on Jun 22, 2011 11:04 AM

This is the fourm for issues with the SQL Developer tool. You will get better answers in the Apex forum or the SQL and PL/SQL forum.

Slow AJAX Response Time

Greetings,
I have an application that uses AJAX a lot to populate related page items. For example, to populate a list of models based on the model year selected. Usually, the process is relatively fast (2-3 seconds). But, I just coded up another use of AJAX and when I select the page item that fires the AJAX process it takes 1 min 40 seconds to finish. This code also does the model year/model aspect. A person selects a model year from a list, then AJAX is used to populate the models for that year.
It looks like the problem is the size of the table I'm accessing. It has 17,000+ rows in it. It contains rows of model year/model data from 1987 to present. I've tried a few things to try and speed it up, but nothing works.
Also, it only 'freezes' when the first year is selected. After that it builds the model list in about 2-3 seconds. Not bad, considering some years have hundreds of models.
Do you have any suggestions on how to speed the process up? I'll be glad to supply code snippets if that helps.
Thanks, Tony

Hi Denes,
What I am doing is relatively straightforward. There is a table PLP_MODEL_PRODUCT_LINE that contains Model Years and Models. I have 2 page items which reference those columns. I have the user first select a Model Year, then AJAX builds the list of Models for the selected Model Year. That way the Model Year and Model selected are valid. There are 17,000+ rows in the table. It contains years from 1987 to 2010. Some years contains hundreds of models. When a Model Year is first selected the page 'hangs' for about 90 seconds. Then, after the initial selection I can select different Model Years and the process is relatively fast, 1-2 seconds.
Below is my code...
- - Table PLP_MODEL_PRODUCT_LINE - -
it contains several columns 2 of which are used by my processes - MODEL_YEAR and MODEL
- - In HTML Form Element Attributes section of P55_YEAR page item - -
onchange="get_model_list_product_line_xml(this,'P55_MODEL')"
- - LOV code of P55_YEAR page item - -
select unique MODEL_YEAR display_value, MODEL_YEAR return_value
from PLP_MODEL_PRODUCT_LINE order by MODEL_YEAR
- - LOV code of P55_MODEL page item - -
select distinct MODEL display_value, MODEL return_value
from PLP_MODEL_PRODUCT_LINE
- - APPLICATION ITEM - - Used to store the value of the Model Year selected and share between routines.
MODEL_YEAR_ITEM_1
- - HTML HEADER - -
function get_model_list_product_line_xml(pThis,pSelect){
var l_Return = null;
var l_Select = html_GetElement(pSelect);
var get = new htmldb_Get(null,html_GetElement('pFlowId').value,
'APPLICATION_PROCESS=GET_MODEL_LIST_PRODUCT_LINE',0);
get.add('MODEL_YEAR_ITEM_1',pThis.value);
gReturn = get.get('XML');
if(gReturn && l_Select){
var l_Count = gReturn.getElementsByTagName("option").length;
l_Select.length = 0;
for(var i=0;i<l_Count;i++){
var l_Opt_Xml = gReturn.getElementsByTagName("option");
appendToSelect(l_Select, l_Opt_Xml.getAttribute('value'),
l_Opt_Xml.firstChild.nodeValue)
get = null;
- - APPLICATION PROCESS - - (named GET_MODEL_LIST_PRODUCT_LINE)
BEGIN
OWA_UTIL.mime_header ('text/xml', FALSE);
HTP.p ('Cache-Control: no-cache');
HTP.p ('Pragma: no-cache');
OWA_UTIL.http_header_close;
HTP.prn ('<select>');
HTP.prn ('<option value="' || '0' || '">' || '-Select-' || '</option>');
FOR c IN (SELECT DISTINCT MODEL
FROM PLP_MODEL_PRODUCT_LINE
WHERE MODEL_YEAR =
CASE
WHEN :MODEL_YEAR_ITEM_1 = '0'
THEN MODEL_YEAR
ELSE TO_NUMBER(:MODEL_YEAR_ITEM_1)
END
ORDER BY MODEL
LOOP
HTP.prn ('<option value="' || c.MODEL || '">' || c.MODEL || '</option>');
END LOOP;
HTP.prn ('</select>');
END;

High GUI Time - Causing high Response time

Hi All,
Average GUI Response time is approx 400 ms in my ECC 6.0 system, OS - HP UX, Database - Oracle 10.2.0.5.
I expect it should always be approx 200 ms, but as it is high it is contibuting to high overall response time.
I expect there are normally two ways of high GUI time :
1) High network time between Presentation layer( User System) and Application Layer(SAP Server).
2) High amount of time in Loading User Screen
For Option 2 I have checked we are using SAP access menu so there should not any problem with loading of User Access Menu.
Average Response time for session_manager is 2 Secs.
Please suggest me what all other ways available to improve GUI time,
Can there be other reasons of high GUI time and how can we make sure that high GUI time is only because of high Network time.
Please suggest.
Shivam

I believe in case you have multiple roundtrips per step, then the client performance comes into play as well. So if you have slow clients this could be an issue too.
Basically you are already looking in the right place (network connection), but i recommend you also check:
- roundtrips per step and amount of data sent to the client
- are all transactions having high gui times, or only a few?
- how is the situation on the clients?
- if you have clients working on prod and qas check the values on the qas system too
Cheers Michael

Slow response time Java 2 (Standard Edition) v1.4.2_13

Hello all, I'm a new user to Java and not a developer or a programmer, but I thought this forum might be the best place to start seeking answers to my questions.
The organization I work for uses a centralized web-based Oracle (v10g) accounting program to monitor it�s worldwide inventory. Our network has very strong firewalls and uses a lot of security software to insure network integrity. Users navigate to a portal website and login to their account where they post transactions and such. When users login and initiate a session we use Microsoft VM to create the virtual environment where we communicate with the accounting program. Microsoft VM works well in our environment and provides quick GUI response times (seconds) as transactions are posted.
Understanding the real possibility that Microsoft VM might go away in the not so distant future we tried using Java 2 (Standard Edition) v1.4.2_13 (build-B06) to create the virtual environment and connect to our accounts. The response time was incredibly slow, it took minutes for the GUI transition from screen to screen or provide any response to input.
As a test I bypassed our network and used a standard commercial ISP (cable) connection and Java 2 (Standard Edition) v1.4.2_13 (build-B06) to create the virtual environment then logged into my account. The GUI response time I experienced using this connection was very fast.
Our internet browser is IE 6 or better, changing to a different browser is not an otion.
My question is: Are the security settings of our network affecting the system response time when using Java to create the virtual environment? Or could it be something else?
Thanks for your help
Gambert

RC4 algorithm is patented by RSA Security and it does NOT included into J2SDK 1.4 (there are Blowfish, DES, DESede, PBEWithMD5AndDES and PBEWithMD5AndTripleDE ciphers in SunJCE provider). You can download a free and JDK 1.4 compliant JCE provider with RC4 (and many other ciphers) from http://www.bouncycastle.org/ But keep in mind you may have to pay some royalty if you are going to use it in the production.

Azure CDN Slow Response time

We are having weird issue:
While accessing CDN (tied to blob images) we get this occasional slowness in images loading between 8:00AM to 9:00AM EST. Also we have SiteGuardian tool setup to monitor our page which has CDN Images which reports slowness in getting images.
Sometimes we get slow response:
URL
https://xxxxx.vo.msecnd.net/xxxxxx/629120870.jpg
Content-Type
application/octet-stream
Element Type
image
Resolve host time
1.032823 seconds
Request connect time
0.012877 seconds
Request transmit time
25.593073 seconds
Response server time
0.337203 seconds
Response receive time
0.002101 seconds
Total time
26.98s
Response
200 - OK
Size
23 K
When things are fine we get a quick response:
URL
https://xxxxx.vo.msecnd.net/xxxxxx/629120870.jpg
Content-Type
application/octet-stream
Element Type
image
Resolve host time
0.012714 seconds
Request connect time
0.035204 seconds
Request transmit time
0.294088 seconds
Response server time
0.254342 seconds
Response receive time
0.006517 seconds
Total time
603ms
Response
200 - OK
Size
23 K
And sometime it just times out.
What is the best way to trouble shoot such scenario? Is there any logging available if a request fails or if there is slowness in response time? Also, anyway to find out which CDN nodes things are cached at etc?
Thanks in advance.

Hi - Our issue is not yet resolved.
We have CDN connected to Azure Blob Storage Account. We let CDN Heuristics control the caching as our images (blobs) do not have any cache control policy set at this time.
We enabled log and we are seeing such entries, one is below:
1.0;2014-03-07T14:35:43.8958635Z;GetBlob;AnonymousClientOtherError;304;4;4;anonymous;;containername;blob;"http://XXXX.blob.core.windows.net/image1087175937.jpg";"/containername/image1087175937.jpg";abcc2dd9-cf8d-42c5-9e54-7dd9d96a3177;0;65.54.81.147:23347;2009-09-19;696;0;116;0;0;;;;;"If-None-Match=Tuesday,
04-Mar-14 00:22:58 GMT";"Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.1; WOW64; Trident/7.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; .NET4.0C; .NET4.0E; BRI/2; EIE10;ENUSWOL)";"REFERRER URL";
Are such entries getting logged because of CDN or why do we get these? The IP address is a Microsoft IP.
Based on documentation it seems:
AnonymousClientOtherError
Indicates that the anonymous requests failed precondition checks (like If- Modified etc.) for GET requests.
Examples: Conditional GET requests that fail the check.
Thanks in advance.

Why does HP LoadRunner measure slow response time for SAP GUI selection steps?

We are running HP LoadRunner 11.52 scenarios out to multiple (up to 4) load generators. Load generators have 24 GB ram and 8 CPU's. We have run a maximum of 200 users and see a maximum usage of ~25% on CPU's. We were previously running SAP GUI 7.4 and downgraded to 7.3 when we came to understand 7.4 is not supported in PAM for LR 11.52. Regardless, our results have not changed. What we are trying to resolve is why the first two steps of opening the SAP GUI and entering system-related selection is taking so long to process? Additionally, we typically see that during the time escalation of those steps, that there is a period where the process seems to pause for a large time gap. The process below shows a snapshot while in progress. The SAP GUI steps are hitting severe peaks wthile all other steps during the process tend to track at a steady quick response time. Any degradation there looks to be tied to the long pauses.
Would anyone have knowledge or experience with this type of output and understand why it might be consistenty happening? Thanks.

> Has anybody else been contacted by SAP regarding a "Very Important Notification about Security and Your SAP System"
A forum search on ' 1298160", one of the note numbers, reveals the answer to your question.
Please always use the search first.

Slow response time with terminal emulator

We are using Oracle Financials pkg. 10.7 Character mode using Oracle DB 7.3.3 on a IBM (sequent) S5000 running at DYNIX/ptx 4.2.3 (soon to be 4.2.4). On the end user side, the accounting dept. is connecting to the server using EXTRA Personal Client. During the course of the day, the response time of the emulator slows down. I can count to 25 sometimes b/4 the emulator responds (catches up with the key strokes). Some days it does not happen until the end of the work day and other times it can happen after just a few hours. After checking the network, application and server, we can find nothing wrong. If we have the user reboot their p.c., this seems to clear up the problem. Has anyone else seen or heard of this problem??? If so, does anyone know how to correct it??? We have installed and tried a different emulator that seems to be doing the samething, but only not as bad (slow).
Thanks,
Tony Dopkins
UNIX System Administrator
Andersen Windows

Never heard of this problem or this emulator product.
Oracle did/does have their own emulator that sort of similuates a GUI environment.
It is called OADM (Oracle Display Manager).
If you call support, they may be able to send it to you. However, it's no longer supported, and is a little buggy. But it has no performance problems.
If it straight character feel the users need, Kea TERM works 4 me.
Or, possibly call the your emulators support line.. it could be a known issue with their product..
Most likely it has nothing to do with Oracle products.

After IOS 8 update, the screen is jerky and the response time is really, really slow... Using a PC to submit this!

Is there a solution to a jerky screen and a slow response time after updating to IOS 8?

Try some basic troubleshooting:
(A) Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
(B) Try reset all settings
Settings>General>Reset>Reset All Settings
(C) Setup as new (data will be lost)
Settings>General>Reset>Erase all content and settings

Slow GUI response time on 680

Similar Messages

Maybe you are looking for