SLOW iChat since Safari upgrade...
While I've seen posts alluding to this, I've yet to see any answers as to WHY it might be happening.
Since updating to Safari 3 Beta sending messages on iChat (3.1.8) takes a while to actually appear in the message window. This is happening on both my MacBook and my G4, both running 10.4.9
Is this happening to anyone else? Any suggestions in getting around it? Finding it QUITE annoying!
thanks everybody!
You probably have Chax running with iChat. Go into iChat's Preferences, then under the Chax icon, in the Chats section disable “Automatically accept text invitations.” That did the trick for me.
Similar Messages
-
(Slow Network): iSight camera not working in iChat since Leopard upgrade
I have a different type of iChat video issue. My Power Mac G4, 867 MHz, 1 GB DRAM is a supported Mac for the Leopard upgrade. I've successfully installed OS 10.5.
Also my Power Mac meets the iChat Conferencing Requirements for 1-on-1 Video Chat per the OS 10.5 system requirements and the application note here:
http://docs.info.apple.com/article.html?artnum=301050
My iSight camera is connected via Firewire to an Apple Cinema Display, which feeds back to the Power Mac G4.
1) When I boot from my 10.3.9 Carbon Copy Cloner backup my iSight works in iChat (at least locally to see myself) without any issue. Green light comes on and shows me locally on video and audio sound bars. Before the OS upgrade the iSight worked fine for live video conferences with iChat 2.1.3 under Mac OS 10.3.9
2) Running OS 10.5 when I go to iChat 4.0's preferences video pane the following message is waiting "This computer does not support video conferencing."
3) With Leopard iChat 4.0 the Connector Doctor under "capabilities" says "(Slow Network)" for 1-on-1 Video Chat and won't even show video locally or turn on the iSight's green light.Fixed!
My Power Mac Quicksilver G4, 867 MHz. problem with (Slow Network) in the iChat Connection Doctor, no video preview or video iChat since upgrading to OS 10.5 Leopard and iChat 4.0 has been solved with the following posted towards the end of the thread below. I can finally see my video preview with iChat 4.0 and have also video chatted successfully with one other user.
Topic : Macbook - iChat says "This computer does not support video conferencing"
http://discussions.apple.com/thread.jspa?threadID=1197506
Fixed by Apple Article: http://docs.info.apple.com/article.html?artnum=307035
Products affected
Mac OS X 10.5 Leopard
iChat
PowerPC-based Mac with a 867MHz processor
Solution
Quit iChat.
Open Terminal (it's in the Utilities folder, in the Applications folder).
In Terminal type or paste this command on a single line:
defaults write com.apple.iChat newbwdup 300000
Press Return.
Quit Terminal.
Open iChat. -
Google and ICal issues since Safari upgrade
After we recently upgraded Safari, when I add an event to my google calendar or to my ical, which are synced, it shows up twice on the ical calendar. This only happens for my events--no one else's in our family. I am the main person on the account. Also, we are not able to see Google Calendar on safari since we upgraded.
I am trying to publish my google calendar of events onto my web page. In Firefox the calendar displays and all events show up fine. However, in Safari, my google calendar shows up but none of the events are displayed. I have checked & double checked that the sharing settings are correct in google calendars!! I've even made sure to empty all cashes Can anyone help me understand why it works in Firefox but not with Safari??
-
LG G3 Vigor - slow/unusable since Lollipop upgrade
I've had the Vigor since February - it shipped with KitKat installed, and it ran fine. Shortly after I got it, it received an OTA upgrade to Android 5, and since that time the phone is so slow as to be unusable. Some apps (inlcuding basic fucntionality like phone call and text message) can take 20-30 seconds or more to come up. There have been times where I missed a phone call because the device did not respond to my attempt to answer it in time. Sometimes apps do come up faster, but overall performance is substantially worse than it was before the upgrade - and even worse than the Galaxy S3 it replaced.
I am a fairly savvy android user - I have tried multiple things to impreove performance. I have reimaged the phone multiple times, cleared cache, tried running the phone with just the "factory" apps - nothing helps. I'm now trying multiple things to try and keep memory usage down and boost performance, but again - nothing I've tried has helped. I have the phone for work, but it is officially reaching the point where I can't rely on it to work if I need it. Is it possible the phone itself is defective?Hello there
I’m sorry you are experiencing phone issues after updating to Lollipop; I would be happy to assist you.
You stated that you have tried many troubleshooting steps. You said you cleared cache, but did you clear all cached data?
To wipe all app cache, follow these steps:
From the home screen, tap Apps.
Tap Settings.
Select the General tab.
Tap Storage.
Wait for menu options to finish calculating.
Tap Cached data, and then tap OK.
Have you downloaded the LG Support Tool? The Support Tool allows you to create a backup and also download firmware updates. To download the free software click here.
Thank you,
Charise -
Having trouble with iChat since lion upgrade
use iChat just about every night. ever since upgrading to lion, when i make a call, i can see the person on the other end but no sound. they can see and hear me. had my girlfriend record video in photo booth and it plays back with sound so its not her mic. rebooted, quit ichat, tried a number of things but still no audio. finally, we used skype and it worked perfectly. has anyone else had this issue?
It was the act of turning FaceTime off, not quitting it, that did the trick for most.
-
Slow broadband since line upgraded
My boradband speed seems to have slowed. For example I can no longer use BBC iPlayer on my Smart TV or PVR. It may be an amazing coincidence, but it seems the speed went slower at around the time BT sent me an email telling me that they had upgraded my line (13th December 2011). The email said to give it a 10 days to settle, but after 2 months it does not seem to have improved.
BT Speed test say I am getting 1.7Mbps out of 2.3Mbps but it feels slower. uSwitch are showing me as the slowest boradband connection of any house in my street at 1.4Mbps download / 0.3 upload. My Neighbours are apparently getting 2Mbps to 3.1Mbps via BT (and over 5Mbps from other suppliers).
Here are the details from my BT broadband router in case they help...
ADSL line status
Connection information
Line state Connected
Connection time 1 day, 3:22:33
Downstream 1,728 Kbps
Upstream 344 Kbps
ADSL settings
VPI/VCI 0/38
Type PPPoA
Modulation ITU-T G.992.3
Latency type Interleaved
Noise margin (Down/Up) 5.8 dB / 5.0 dB
Line attenuation (Down/Up) 52.5 dB / 25.4 dB
Output power (Down/Up) 0.0 dBm / 12.9 dBm
Loss of Framing (Local) 41
Loss of Signal (Local) 4
Loss of Power (Local) 0
FEC Errors (Down/Up) 0 / 4294967282
CRC Errors (Down/Up) 3908 / N/A
HEC Errors (Down/Up) N/A / 10
Error Seconds (Local) 12274
Do you think this a problem with my connection or my local equipment?
cheers,
JohnThanks for speedy replies. Your assistance is appreciated and have followed the links and read the advice as best I could.
I plugged laptop directly into home hub (with Cat5) and did speed test and got the results below. This seems slower than I would have expected, but would value other peoples judgement.
1. Best Effort Test: -provides background information.
Download Speed
1.51 Mbps
0 Kbps
2 Mbps Max Achievable Speed
Download speed achieved during the test was - 1.51 Mbps For your connection, the acceptable range of speeds is 800 Kbps-2 Mbps. IP Profile for your line is - 1.52 Mbps
2. Upstream Test: -provides background information.
Upload Speed
304 Kbps
0 Kbps
832 Kbps Max Achievable Speed
Upload speed achieved during the test was - 304Kbps Additional Information: Upstream Rate IP profile on your line is - 832 Kbps
We were unable to identify any performance problem with your service at this time. It is possible that any problem you are currently, or had previously experienced may have been caused by traffic congestion on the Internet or by the server you were accessing responding slowly. If you continue to encounter a problem with a specific server, please contact the administrator of that server in the first instance.
Then I did a “quite line test” and heard only the faintest hints of noise.
Then I plugged home hub into the master socket, and did repeat “quite line test” and again heard very similar low levels of noise. Then I got the ADSL info from hub again, with following results:
ADSL line status
Connection information
Line state
Connected
Connection time
0 days, 0:06:52
Downstream
2,019 Kbps
Upstream
376 Kbps
ADSL settings
VPI/VCI
0/38
Type
PPPoA
Modulation
ITU-T G.992.3
Latency type
Interleaved
Noise margin (Down/Up)
6.3 dB / 6.0 dB
Line attenuation (Down/Up)
54.0 dB / 25.5 dB
Output power (Down/Up)
0.0 dBm / 12.9 dBm
Loss of Framing (Local)
52
Loss of Signal (Local)
5
Loss of Power (Local)
0
FEC Errors (Down/Up)
0 / 54
CRC Errors (Down/Up)
0 / N/A
HEC Errors (Down/Up)
N/A / 29
Error Seconds (Local)
12434
Even I can spot that this is different. Although I am not 100% sure what all the differences means, the Noise Margin is now better (6dB+). If understand what I have read this is good/OK. Given this I repeated the speed test (an hour after first one), with following results:
1. Best Effort Test: -provides background information.
Download Speed
1.76 Mbps
0 Kbps
2 Mbps Max Achievable Speed
Download speed achieved during the test was - 1.76 Mbps For your connection, the acceptable range of speeds is 800 Kbps-2 Mbps. IP Profile for your line is - 1.78 Mbps
2. Upstream Test: -provides background information.
Upload Speed
286 Kbps
0 Kbps
832 Kbps Max Achievable Speed
Upload speed achieved during the test was - 286Kbps Additional Information: Upstream Rate IP profile on your line is - 832 Kbps
We were unable to identify any performance problem with your service at this time. It is possible that any problem you are currently, or had previously experienced may have been caused by traffic congestion on the Internet or by the server you were accessing responding slowly.
If you continue to encounter a problem with a specific server, please contact the administrator of that server in the first instance.
I then carried on with some sort of QoS testing it offered and got the following:
1. Assured Rate Test: -provides background information.
Download Speed
1.85 Mbps
0 Kbps
0 Kbps Max Achievable Speed
Download speed achieved during the test was - 1.85 Mbps For your connection, the acceptable range of speeds is 0 Kbps-0 Kbps . Additional Information: Assured Rate IP profile on your line is - 0 Kbps
We were unable to identify any performance problem with your service at this time.
Given the above, it looks to me that some part of the problem is the internal phone wiring / noise beyond the master socket. Is that how others read this?
I also think that even going to the master socket I am still getting relatively slow download speeds compared to neighbour on the same exchange – and so that needs investigating too.
Cheers,
John -
Very slow BB since modem upgrade
Hi
I've recently went through with the modem upgrade provided by Kelly Comms. Seemed ok at first but now my connection is pretty much unusable upstairs.
Download speed is 1.6MBs upstairs but much better close to the modem (understandably).
Any options? Powerline? How much to get a cable professionally done ?
Can BT do anything? this is useless
RobertYeah, wireless
So the only options are powerline adapter, cable (unlikely option) really. Wonder why it has reduced as much though.
Do wireless repeaters help? -
Why is Pages slow opening since Maverick upgrade?
Hardware Information:
iMac (20-inch, Early 2008)
iMac - model: iMac8,1
1 2.66 GHz Intel Core 2 Duo CPU: 2 cores
2 GB RAM
Video Information:
ATI Radeon HD 2600 Pro - VRAM: 256 MB
System Software:
OS X 10.9.2 (13C64) - Uptime: 0 days 1:50:11
Disk Information:
ST3320820AS_Q disk0 : (320.07 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 319.21 GB (164.95 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information:
Apple, Inc. Keyboard Hub
Apple, Inc Apple Keyboard
Apple Inc. Built-in iSight
Sony USB 2.0 MultiCard R/W
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
FireWire Information:
Thunderbolt Information:
Launch Daemons:
[System] com.adobe.fpsaud.plist 3rd-Party support link
[System] com.google.keystone.daemon.plist 3rd-Party support link
[System] com.macpaw.CleanMyMac2.Agent.plist 3rd-Party support link
[System] com.oracle.java.Helper-Tool.plist 3rd-Party support link
Launch Agents:
[System] com.google.keystone.agent.plist 3rd-Party support link
[System] com.hp.messagecenter.launcher.plist 3rd-Party support link
[System] com.oracle.java.Java-Updater.plist 3rd-Party support link
User Launch Agents:
[not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
[not loaded] com.macpaw.CleanMyMac.helperTool.plist 3rd-Party support link
[not loaded] com.macpaw.CleanMyMac.volumeWatcher.plist 3rd-Party support link
[not loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist 3rd-Party support link
[not loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist 3rd-Party support link
[not loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist 3rd-Party support link
[not loaded] com.zeobit.MacKeeper.Helper 3rd-Party support link
User Login Items:
CleanMyDrive
Safari
Mail
ConnectService
Internet Plug-ins:
JavaAppletPlugin: Version: Java 7 Update 45 Outdated! Update
FlashPlayer-10.6: Version: 12.0.0.70 - SDK 10.6 3rd-Party support link
Default Browser: Version: 537 - SDK 10.9
Flash Player: Version: 12.0.0.70 - SDK 10.6 3rd-Party support link
AdobePDFViewer: Version: 9.5.5 3rd-Party support link
QuickTime Plugin: Version: 7.7.3
Silverlight: Version: 5.1.10411.0 - SDK 10.6 3rd-Party support link
PandoWebInst: Version: 1.0 3rd-Party support link
iPhotoPhotocast: Version: 7.0
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
Move-Media-Player: Version: npmnqmp 071303000006 3rd-Party support link
3rd Party Preference Panes:
Flash Player 3rd-Party support link
Java 3rd-Party support link
Media Booster 3rd-Party support link
Old Applications:
SLLauncher: Version: 1.0 - SDK 10.5 3rd-Party support link
/Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
Time Machine:
Time Machine not configured!
Top Processes by CPU:
1% WindowServer
1% EtreCheck
0% aosnotifyd
Top Processes by Memory:
111 MB Mail
78 MB Safari
68 MB com.apple.WebKit.WebContent
61 MB Pages
55 MB Calendar
Virtual Memory Information:
102 MB Free RAM
874 MB Active RAM
793 MB Inactive RAM
274 MB Wired RAM
379 MB Page-ins
2 MB Page-outsCheck out this link and see if it helps hope it does
http://www.iclarified.com/34456/how-to-tweak-ios-to-improve-the-battery-life-of- your-iphone-ipad-or-ipod-touch -
My late 2009 iMac is running slow, particularly on Mail, more so since I upgraded to Yosemite. I have run an Etrecheck but it doesn't mean too much to me. If anyone can point me to what I need to do I'll be very grateful.
Etrecheck says:
Problem description:
Imac late 2009 running slow
EtreCheck version: 2.2 (132)
Report generated 5/3/15, 4:33 PM
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
iMac (21.5-inch, Late 2009) (Technical Specifications)
iMac - model: iMac10,1
1 3.06 GHz Intel Core 2 Duo CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
Empty
BANK 1/DIMM0
Empty
BANK 0/DIMM1
2 GB DDR3 1067 MHz ok
BANK 1/DIMM1
2 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce 9400 - VRAM: 256 MB
iMac 1920 x 1080
System Software: ℹ️
OS X 10.10.3 (14D136) - Time since boot: 5:5:56
Disk Information: ℹ️
ST3500418ASQ disk0 : (500.11 GB)
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 499.25 GB (308.35 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-ST DVDRW GA11N
USB Information: ℹ️
Apple Inc. Built-in iSight
Western Digital My Book 111A 1 TB
disk1s1 (disk1s1) <not mounted> : 32 KB
My Book (disk1s3) /Volumes/My Book : 1.00 TB (226.58 GB free)
Apple Internal Memory Card Reader
Apple, Inc. Keyboard Hub
Apple, Inc Apple Keyboard
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Configuration files: ℹ️
/etc/hosts - Count: 30
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Toast 10 Titanium/Toast Titanium.app
[not loaded] com.roxio.BluRaySupport (1.1.6) [Click for support]
[not loaded] com.roxio.TDIXController (1.7) [Click for support]
/Library/Application Support/LogMeIn/drivers
[loaded] com.logmein.driver.LogMeInSoundDriver (4.1.48f99) [Click for support]
/System/Library/Extensions
[not loaded] com.NovatelWireless.driver.NovatelWirelessUSBCDCECMControl (3.0.13) [Click for support]
[not loaded] com.NovatelWireless.driver.NovatelWirelessUSBCDCECMData (3.0.13) [Click for support]
[not loaded] com.ZTE.driver.ZTEUSBCDCACMData (1.3.8) [Click for support]
[not loaded] com.ZTE.driver.ZTEUSBMassStorageFilter (1.3.8) [Click for support]
[not loaded] com.novamedia.driver.IceraUSB_MSD_Bypass (1.3.0) [Click for support]
[not loaded] com.novatelwireless.driver.3G (3.0.13) [Click for support]
[not loaded] com.novatelwireless.driver.DisableAutoInstall (3.0.13) [Click for support]
[not loaded] com.option.driver.Option72 (2.15.0) [Click for support]
[not loaded] com.option.driver.OptionHS (3.26.0) [Click for support]
[not loaded] com.option.driver.OptionMSD (1.21.0) [Click for support]
[not loaded] com.option.driver.OptionQC (1.11.0) [Click for support]
[not loaded] com.pctools.iantivirus.kfs (1.0.1) [Click for support]
[not loaded] com.rim.driver.BlackBerryUSBDriverInt (0.0.39) [Click for support]
[not loaded] com.rim.driver.BlackBerryUSBDriverVSP (0.0.45) [Click for support]
[not loaded] com.vodafone.driver (3.0.9) [Click for support]
[not loaded] com.zte.driver.cdc_ecm_qmi (1.0.1) [Click for support]
[not loaded] com.zte.driver.cdc_usb_bus (1.0.1) [Click for support]
[not loaded] de.novamedia.driver.NMSmartplugSCSIDevice (1.0.1) [Click for support]
[not loaded] de.novamedia.oem.vodafone.vtp.huawei.cdc (0.0.2) [Click for support]
/System/Library/Extensions/NMHuaweiPhonesVTPCDC.kext/Contents/Resources
[not loaded] de.novamedia.driver.NMUSBCDCACMData.VTP (3.2.6) [Click for support]
/System/Library/Extensions/NovatelWireless3G.kext/Contents/Plugins
[not loaded] com.novatelwireless.driver.3GData (3.0.13) [Click for support]
/System/Library/Extensions/Vodafone.kext/Contents/Plugins
[not loaded] com.vodafone.driver.Data (3.0.9) [Click for support]
/Volumes/My Book/Extras/WD +TURBO Installer.app
[not loaded] com.wdc.driver.1394HP (1.0.9) [Click for support]
[not loaded] com.wdc.driver.USBHP (1.0.11) [Click for support]
Startup Items: ℹ️
AdobeVersionCueCS2: Path: /Library/StartupItems/AdobeVersionCueCS2
Qmaster: Path: /Library/StartupItems/Qmaster
VirtualPCOSServices: Path: /Library/StartupItems/VirtualPCOSServices
Startup items are obsolete in OS X Yosemite
Problem System Launch Agents: ℹ️
[killed] com.apple.CallHistoryPluginHelper.plist
[killed] com.apple.CallHistorySyncHelper.plist
[killed] com.apple.cloudphotosd.plist
[killed] com.apple.coreservices.appleid.authentication.plist
[killed] com.apple.EscrowSecurityAlert.plist
[killed] com.apple.icloud.fmfd.plist
[killed] com.apple.Maps.pushdaemon.plist
[killed] com.apple.photolibraryd.plist
[killed] com.apple.security.cloudkeychainproxy.plist
[killed] com.apple.telephonyutilities.callservicesd.plist
10 processes killed due to memory pressure
Problem System Launch Daemons: ℹ️
[killed] com.apple.awdd.plist
[killed] com.apple.ctkd.plist
[killed] com.apple.icloud.findmydeviced.plist
[killed] com.apple.ifdreader.plist
[failed] com.apple.mtrecorder.plist
[killed] com.apple.nehelper.plist
[killed] com.apple.periodic-daily.plist
[killed] com.apple.softwareupdated.plist
[killed] com.apple.wdhelper.plist
8 processes killed due to memory pressure
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.adobe.CS4ServiceManager.plist [Click for support]
[loaded] com.adobe.CS5ServiceManager.plist [Click for support]
[failed] com.logmein.LMILaunchAgentFixer.plist [Click for support] [Click for details]
[running] com.logmein.logmeingui.plist [Click for support]
[running] com.logmein.logmeinguiagent.plist [Click for support]
[not loaded] com.logmein.logmeinguiagentatlogin.plist [Click for support]
[running] de.novamedia.VodafoneDeviceObserver.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.adobe.SwitchBoard.plist [Click for support]
[loaded] com.adobe.versioncueCS3.plist [Click for support]
[loaded] com.adobe.versioncueCS4.plist [Click for support]
[failed] com.apple.spirecorder.plist
[loaded] com.bombich.ccc.plist [Click for support]
[running] com.logmein.logmeinserver.plist [Click for support]
[loaded] com.logmein.raupdate.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[loaded] jp.co.canon.MasterInstaller.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.adobe.ARM.[...].plist [Click for support]
[loaded] com.adobe.ARM.[...].plist [Click for support]
[loaded] com.google.keystone.agent.plist [Click for support]
User Login Items: ℹ️
iTunesHelper Application Hidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Mail Application (/Applications/Mail.app)
Dropbox Application (/Applications/Dropbox.app)
AdobeResourceSynchronizer Application Hidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
iAntiVirus Application Hidden (/Applications/iAntiVirus/iAntiVirus.app)
Internet Plug-ins: ℹ️
LogMeInSafari64: Version: 1.0.730 [Click for support]
Unity Web Player: Version: UnityPlayer version 3.5.3f3 - SDK 10.6 [Click for support]
Default Browser: Version: 600 - SDK 10.10
AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
FlashPlayer-10.6: Version: 17.0.0.169 - SDK 10.6 [Click for support]
LogMeIn: Version: 1.0.730 [Click for support]
Flash Player: Version: 17.0.0.169 - SDK 10.6 [Click for support]
LogMeInSafari32: Version: 1.0.730 [Click for support]
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0
AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
SharePointBrowserPlugin: Version: 14.0.0 [Click for support]
EPPEX Plugin: Version: 10.0 [Click for support]
JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
Audio Plug-ins: ℹ️
DVCPROHDAudio: Version: 1.2
3rd Party Preference Panes: ℹ️
Adobe Version Cue CS2 [Click for support]
Adobe Version Cue CS3 [Click for support]
Adobe Version Cue CS4 [Click for support]
Déjà Vu [Click for support]
Flash Player [Click for support]
Growl [Click for support]
SixtyFourSwitcher [Click for support]
Time Machine: ℹ️
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 499.25 GB Disk used: 190.89 GB
Destinations:
My Book [Local]
Total size: 1.00 TB
Total number of backups: 13
Oldest backup: 2015-04-21 19:59:59 +0000
Last backup: 2015-05-02 19:49:37 +0000
Size of backup disk: Adequate
Backup size 1.00 TB > (Disk used 190.89 GB X 3)
Top Processes by CPU: ℹ️
12% iavd
5% iAntiVirus
5% WindowServer
5% diskimages-helper
1% mdworker(5)
Top Processes by Memory: ℹ️
537 MB kernel_task
266 MB Google Chrome Helper(4)
111 MB Google Chrome
74 MB ocspd
74 MB WindowServer
Virtual Memory Information: ℹ️
1.45 GB Free RAM
2.55 GB Used RAM
59 MB Swap Used
Diagnostics Information: ℹ️
May 3, 2015, 11:26:23 AM /Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_2015-05-03-112623_[ redacted].cpu_resource.diag [Click for details]
May 3, 2015, 11:22:17 AM Self test - passedThanks for all the replies.
I've now installed the ad blocker, thrown away the unwanted files, and thrown away a copy of Firefox that Adware said had a problematic extension.
Things are better, but still slow.
Activity Monitor shows that with just Mail, Chrome and Excel running, 2.9GB of my 4GB RAM is used. Opening InDesign (always slow) increase that to 3.2GB. But the graph stays green.
Console shows several potential problems but I don't know if any are significant. In any case I will call my Mac store tomorrow to ask their advice about RAM.
04/05/2015 18:52:05.309 mds[55]: (DiskStore.Error:1417) Unexpected file dev:16777225 storeDev:16777218 mode:41ed hint:3383189 oid:3383189 ino:3383189 fsEvents:1 /Users/leopard/Library/Mail/V2/[email protected]/INBOX.mbox/AB2DA797-EBE4-453E-82BD-8CE588E5D59D/Data/9/6/6/Attachments/669999/5 -- /Users/leopard/Library/Mail/V2/[email protected]/INBOX.mbox/AB2DA797-EBE4-453E-82BD-8CE588E5D59D/Data/9/6/6/Attachments/669999/5
04/05/2015 18:52:05.309 mds[55]: (DiskStore.Error:1417) Unexpected file dev:16777225 storeDev:16777218 mode:41ed hint:3375445 oid:3375445 ino:3375445 fsEvents:1 /Users/leopard/Library/Mail/V2/[email protected]/INBOX.mbox/AB2DA797-EBE4-453E-82BD-8CE588E5D59D/Data/9/6/6/Messages -- /Users/leopard/Library/Mail/V2/[email protected]/INBOX.mbox/AB2DA797-EBE4-453E-82BD-8CE588E5D59D/Data/9/6/6/Messages
04/05/2015 18:52:10.564 com.apple.backupd-helper[66]: Attempt to use XPC with a MachService that has HideUntilCheckIn set. This will result in unpredictable behavior: com.apple.backupd.status.xpc
04/05/2015 18:52:11.090 com.apple.backupd-helper[66]: Attempt to use XPC with a MachService that has HideUntilCheckIn set. This will result in unpredictable behavior: com.apple.backupd.status.xpc
04/05/2015 18:52:12.727 Mail[309]: {"status":"400","schemes":"Bearer","scope":"https://mail.google.com/"}
04/05/2015 18:52:13.021 Mail[309]: XOAUTH2 requires user
04/05/2015 18:52:13.022 Mail[309]: Failed to start the SASL connection
SASL(-1): generic failure: XOAUTH2 requires user
04/05/2015 18:52:14.284 helpd[296]: Cannot find executable for CFBundle 0x7fb412caabe0 </Library/Documentation/Help/iWorkFunctionsHelp.help> (not loaded)
04/05/2015 18:52:15.085 helpd[296]: Cannot find executable for CFBundle 0x7fb412d1f540 </Library/Documentation/Help/X422MFPHelp.help> (not loaded)
04/05/2015 18:52:17.455 helpd[296]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary on line 1. Parsing will be abandoned. Break on _CFPropertyListMissingSemicolon to debug.
04/05/2015 18:52:17.456 helpd[296]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary on line 1. Parsing will be abandoned. Break on _CFPropertyListMissingSemicolon to debug.
04/05/2015 18:52:21.737 helpd[296]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary on line 3. Parsing will be abandoned. Break on _CFPropertyListMissingSemicolon to debug.
04/05/2015 18:52:21.738 helpd[296]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary on line 3. Parsing will be abandoned. Break on _CFPropertyListMissingSemicolon to debug.
04/05/2015 18:52:23.292 com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
04/05/2015 18:52:31.811 AddressBookManager[428]: Validate metadata timed out, cancelling
04/05/2015 18:52:33.395 accountsd[262]: AIDA Notification plugin running
04/05/2015 18:52:33.396 accountsd[262]: Enter ShareKitAccountEnabler - didChangeWithType - type=2 for account [email protected] (A9323757-5224-408D-AE23-0CB83451E046).
04/05/2015 18:52:33.467 com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
04/05/2015 18:52:33.573 accountsd[262]: AIDA Notification plugin running
04/05/2015 18:52:33.574 accountsd[262]: Enter ShareKitAccountEnabler - didChangeWithType - type=2 for account [email protected] (A9323757-5224-408D-AE23-0CB83451E046).
04/05/2015 18:52:33.922 accountsd[262]: AIDA Notification plugin running
04/05/2015 18:52:33.923 accountsd[262]: Enter ShareKitAccountEnabler - didChangeWithType - type=2 for account [email protected] (D9A0E166-5A9D-4D1B-B82F-E4CA68F064F3).
04/05/2015 18:52:34.068 accountsd[262]: AIDA Notification plugin running
04/05/2015 18:52:34.068 accountsd[262]: Enter ShareKitAccountEnabler - didChangeWithType - type=2 for account [email protected] (D9A0E166-5A9D-4D1B-B82F-E4CA68F064F3).
04/05/2015 18:52:34.354 com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
04/05/2015 18:52:35.161 icbaccountsd[430]: Connection error while checking Apple Internalness. Error: Error Domain=NSCocoaErrorDomain Code=4099 "Couldn’t communicate with a helper application." (The connection to service named com.apple.CrashReporterSupportHelper was invalidated.) UserInfo=0x7fe8584355d0 {NSDebugDescription=The connection to service named com.apple.CrashReporterSupportHelper was invalidated.}
04/05/2015 18:52:35.597 helpd[296]: Could not find access page in directory /Applications/Carbon Copy Cloner/Carbon Copy Cloner.app/Contents/Resources/Help
04/05/2015 18:52:35.598 helpd[296]: Could not find access page in directory /Applications/Carbon Copy Cloner/Carbon Copy Cloner.app/Contents/Resources/Help
04/05/2015 18:52:35.612 helpd[296]: Could not find access page in directory /Applications/Final Cut Pro Studio/Final Cut Pro.app/Contents/Resources/English.lproj/Final Cut Pro Help
04/05/2015 18:52:35.613 helpd[296]: Could not find access page in directory /Applications/Final Cut Pro Studio/Final Cut Pro.app/Contents/Resources/English.lproj/Final Cut Pro Help
04/05/2015 18:52:37.542 mds[55]: (DiskStore.Error:1417) Unexpected file dev:16777225 storeDev:16777218 mode:41ed hint:3111641 oid:3111641 ino:3111641 fsEvents:1 /Users/leopard/Library/Mail/V2/[email protected]@imap.gmail.com -- /Users/leopard/Library/Mail/V2/[email protected]@imap.gmail.com
04/05/2015 18:52:37.542 mds[55]: (DiskStore.Error:1417) Unexpected file dev:16777225 storeDev:16777218 mode:41ed hint:3078032 oid:3078032 ino:3078032 fsEvents:1 /Users/leopard/Library/Mail/V2/[email protected] -- /Users/leopard/Library/Mail/V2/[email protected]
04/05/2015 18:52:37.542 mds[55]: (DiskStore.Error:1417) Unexpected file dev:16777225 storeDev:16777218 mode:41ed hint:3096791 oid:3096791 ino:3096791 fsEvents:1 /Users/leopard/Library/Mail/V2/[email protected]/[Google Mail].mbox/Spam.mbox -- /Users/leopard/Library/Mail/V2/[email protected]/[Google Mail].mbox/Spam.mbox
04/05/2015 18:52:37.542 mds[55]: (DiskStore.Error:1417) Unexpected file dev:16777225 storeDev:16777218 mode:41ed hint:3112877 oid:3112877 ino:3112877 fsEvents:1 /Users/leopard/Library/Mail/V2/[email protected]@imap.gmail.com -- /Users/leopard/Library/Mail/V2/[email protected]@imap.gmail.com
04/05/2015 18:52:37.542 mds[55]: (DiskStore.Error:1417) Unexpected file dev:16777225 storeDev:16777218 mode:41ed hint:3105498 oid:3105498 ino:3105498 fsEvents:1 /Users/leopard/Library/Mail/V2/Mailboxes -- /Users/leopard/Library/Mail/V2/Mailboxes
04/05/2015 18:52:39.465 sandboxd[328]: ([430]) icbaccountsd(430) deny mach-lookup com.apple.CrashReporterSupportHelper
04/05/2015 18:52:42.205 com.apple.backupd[433]: Starting automatic backup
04/05/2015 18:52:43.308 com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
04/05/2015 18:52:50.022 com.apple.backupd[433]: Backing up to /dev/disk1s3: /Volumes/My Book/Backups.backupdb
04/05/2015 18:53:40.588 mapspushd[322]: 2015-05-04 18:53:40.588, 322, 42c4fc20, [MapsAnnouncements]: server returned error: 404 for URL http://gspe21.ls.apple.com/config/announcements?hardware=iMac10,1&lang=en&os=osx &os_build=14D136&os_version=10.10.3
04/05/2015 18:53:40.589 mapspushd[322]: 2015-05-04 18:53:40.588, 322, 42c4fc20, [MapsAnnouncements]: Failed to load announcements document: Error Domain=GEOErrorDomain Code=-601 "The operation couldn’t be completed. (GEOErrorDomain error -601.)" UserInfo=0x7fba42c4deb0 {NSErrorFailingURLStringKey=http://gspe21.ls.apple.com/config/announcements?hardware=iMac10,1&lang=en&os=osx &os_build=14D136&os_version=10.10.3, HTTP Status Code=404}
04/05/2015 18:53:40.989 com.apple.xpc.launchd[1]: (com.apple.quicklook[440]) Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.quicklook
04/05/2015 18:53:41.159 nbagent[439]: XPC Activity invoked with state=0
04/05/2015 18:53:41.160 nbagent[439]: XPC Activity invoked with state=2
04/05/2015 18:53:41.329 storeaccountd[317]: AccountServiceDelegate: Accepting new connection <NSXPCConnection: 0x7ff9a8580770> connection from pid 439 with interface <AccountServiceInterface: 0x7ff9a8598880> (PID 439)
04/05/2015 18:53:41.739 periodic-wrapper[441]: Running daily periodic task.
04/05/2015 18:53:43.613 storeaccountd[317]: ADI: {
"Accept-Ranges" = bytes;
"Cache-Control" = "max-age=14400";
Connection = "Keep-Alive";
"Content-Encoding" = gzip;
"Content-Language" = "en-us";
"Content-Length" = 793;
"Content-Type" = "application/x-apple-plist";
Date = "Mon, 04 May 2015 17:53:43 GMT";
Etag = "\"e20-5071070ddab80\"";
Expires = "Mon, 04 May 2015 21:53:43 GMT";
"Keep-Alive" = "timeout=15, max=281";
"Last-Modified" = "Tue, 04 Nov 2014 23:01:18 GMT";
Server = Apache;
04/05/2015 18:53:44.006 sandboxd[328]: ([447]) nbstated(447) deny ipc-posix-shm-read-data com.apple.AppleDatabaseChanged
04/05/2015 18:53:58.000 kernel[0]: hfs: mounted Recovery HD on device disk0s3
04/05/2015 18:53:58.472 mdworker[366]: (ImportBailout.Error:1325) Asked to exit for Diskarb
04/05/2015 18:53:58.474 mdworker[435]: (ImportBailout.Error:1325) Asked to exit for Diskarb
04/05/2015 18:53:58.476 mdworker[436]: (ImportBailout.Error:1325) Asked to exit for Diskarb
04/05/2015 18:53:58.476 mdworker[437]: (ImportBailout.Error:1325) Asked to exit for Diskarb
04/05/2015 18:53:58.478 CoreServicesUIAgent[359]: unexpected message <OS_xpc_error: <error: 0x7fff76be0c60> { count = 1, contents =
"XPCErrorDescription" => <string: 0x7fff76be0f70> { length = 18, contents = "Connection invalid" }
}>
04/05/2015 18:53:58.478 mdworker[438]: (ImportBailout.Error:1325) Asked to exit for Diskarb
04/05/2015 18:53:58.558 fseventsd[42]: Logging disabled completely for device:1: /Volumes/Recovery HD
04/05/2015 18:53:58.565 mds[55]: (Volume.Normal:2464) volume:0x7f96c413b000 ********** Bootstrapped Creating a default store:0 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/Recovery HD
04/05/2015 18:53:58.000 kernel[0]: hfs: unmount initiated on Recovery HD on device disk0s3
04/05/2015 18:56:38.724 Mail[309]: {"status":"400","schemes":"Bearer","scope":"https://mail.google.com/"}
04/05/2015 18:56:39.031 Mail[309]: XOAUTH2 requires user
04/05/2015 18:56:39.031 Mail[309]: Failed to start the SASL connection
SASL(-1): generic failure: XOAUTH2 requires user
04/05/2015 18:56:40.704 Mail[309]: {"status":"400","schemes":"Bearer","scope":"https://mail.google.com/"}
04/05/2015 18:56:40.977 Mail[309]: XOAUTH2 requires user
04/05/2015 18:56:40.977 Mail[309]: Failed to start the SASL connection
SASL(-1): generic failure: XOAUTH2 requires user
04/05/2015 18:56:43.160 Mail[309]: {"status":"400","schemes":"Bearer","scope":"https://mail.google.com/"}
04/05/2015 18:56:43.428 Mail[309]: XOAUTH2 requires user
04/05/2015 18:56:43.428 Mail[309]: Failed to start the SASL connection
SASL(-1): generic failure: XOAUTH2 requires user
04/05/2015 18:57:00.920 WindowServer[154]: CGXDisplayDidWakeNotification [729933074334]: posting kCGSDisplayDidWake
04/05/2015 18:57:00.920 WindowServer[154]: handle_will_sleep_auth_and_shield_windows: Deferring.
04/05/2015 18:57:01.086 identityservicesd[287]: <IMMacNotificationCenterManager: 0x7fd52247b130>: notification observer: com.apple.iChat notification: __CFNotification 0x7fd522414040 {name = _NSDoNotDisturbDisabledNotification}
04/05/2015 18:57:01.235 identityservicesd[287]: <IMMacNotificationCenterManager: 0x7fd52247b130>: NC Disabled: NO
04/05/2015 18:57:01.241 identityservicesd[287]: <IMMacNotificationCenterManager: 0x7fd52247b130>: DND Enabled: NO
04/05/2015 18:57:01.242 identityservicesd[287]: <IMMacNotificationCenterManager: 0x7fd52247b130>: Updating enabled: YES (Topics: (
04/05/2015 18:57:06.630 com.apple.backupd[433]: Will copy (547 KB) from Macintosh HD
04/05/2015 18:57:06.720 com.apple.backupd[433]: Found 14392 files (112.99 GB) needing backup
04/05/2015 18:57:06.728 com.apple.backupd[433]: 136.19 GB required (including padding), 118.1 GB available
04/05/2015 18:57:09.840 Mail[309]: {"status":"400","schemes":"Bearer","scope":"https://mail.google.com/"}
04/05/2015 18:57:10.119 Mail[309]: XOAUTH2 requires user
04/05/2015 18:57:10.119 Mail[309]: Failed to start the SASL connection
SASL(-1): generic failure: XOAUTH2 requires user
04/05/2015 18:57:12.387 Mail[309]: {"status":"400","schemes":"Bearer","scope":"https://mail.google.com/"}
04/05/2015 18:57:12.668 Mail[309]: XOAUTH2 requires user
04/05/2015 18:57:12.669 Mail[309]: Failed to start the SASL connection
SASL(-1): generic failure: XOAUTH2 requires user
04/05/2015 18:57:14.340 Mail[309]: {"status":"400","schemes":"Bearer","scope":"https://mail.google.com/"}
04/05/2015 18:57:14.619 Mail[309]: XOAUTH2 requires user
04/05/2015 18:57:14.619 Mail[309]: Failed to start the SASL connection
SASL(-1): generic failure: XOAUTH2 requires user
04/05/2015 18:57:14.620 com.apple.backupd[433]: Deleted backup /Volumes/My Book/Backups.backupdb/Paul Breeden’s imac (2)/2015-05-02-204937 containing 782.8 MB; 118.88 GB now available, 136.19 GB required
04/05/2015 18:57:22.106 com.apple.backupd[433]: Deleted backup /Volumes/My Book/Backups.backupdb/Paul Breeden’s imac (2)/2015-05-03-181125 containing 31.6 MB; 118.92 GB now available, 136.19 GB required
04/05/2015 18:57:22.108 com.apple.backupd[433]: Removed 2 expired backups so far, more space is needed - deleting oldest backups to make room
04/05/2015 18:57:22.281 Mail[309]: {"status":"400","schemes":"Bearer","scope":"https://mail.google.com/"}
04/05/2015 18:57:22.562 Mail[309]: XOAUTH2 requires user
04/05/2015 18:57:22.562 Mail[309]: Failed to start the SASL connection
SASL(-1): generic failure: XOAUTH2 requires user
04/05/2015 18:57:47.959 com.apple.backupd[433]: Deleted backup /Volumes/My Book/Backups.backupdb/Paul Breeden’s imac (2)/2015-04-25-125849 containing 2.94 GB; 121.86 GB now available, 136.19 GB required
04/05/2015 18:57:47.960 com.apple.backupd[433]: Removed 3 expired backups so far, more space is needed - deleting oldest backups to make room
04/05/2015 18:58:01.552 com.apple.backupd[433]: Deleted backup /Volumes/My Book/Backups.backupdb/Paul Breeden’s imac (2)/2015-04-26-110446 containing 6.31 GB; 128.17 GB now available, 136.19 GB required
04/05/2015 18:58:01.554 com.apple.backupd[433]: Removed 4 expired backups so far, more space is needed - deleting oldest backups to make room
04/05/2015 18:58:30.290 com.apple.backupd[433]: Deleted backup /Volumes/My Book/Backups.backupdb/Paul Breeden’s imac (2)/2015-04-27-095120 containing 110.88 GB; 239.05 GB now available, 136.19 GB required
04/05/2015 18:58:30.290 com.apple.backupd[433]: Deleted 5 backups containing 120.95 GB total; 239.05 GB now available, 136.19 GB required
04/05/2015 18:58:30.290 com.apple.backupd[433]: Backup date range was shortened: oldest backup is now Apr 28, 2015
04/05/2015 18:59:01.076 com.apple.xpc.launchd[1]: (com.apple.quicklook[533]) Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.quicklook
04/05/2015 18:59:09.015 com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
04/05/2015 18:59:10.846 nsurlstoraged[308]: purgeEntireFileSystemStore - failed to rename the current cache dir /Users/leopard/Library/Containers/com.apple.mail/Data/Library/Caches/com.apple. mail/fsCachedData to new cache dir /var/folders/wv/x9z7l4911p33dv8jyv6nby6m0000gn/T/fsCachedData_remove. Errno=18
04/05/2015 18:59:14.837 com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
04/05/2015 18:59:51.249 spindump[412]: Saved spin report for System Preferences version 14.0 (14.0) to /Library/Logs/DiagnosticReports/System Preferences_2015-05-04-185951_Paul-Breedens-imac-5.spin
04/05/2015 19:00:05.000 kernel[0]: process WindowServer[154] caught causing excessive wakeups. Observed wakeups rate (per sec): 157; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 66094
04/05/2015 19:00:05.871 com.apple.xpc.launchd[1]: (com.apple.ReportCrash.Root[544]) Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.ReportCrash.DirectoryService
04/05/2015 19:00:05.875 SubmitDiagInfo[340]: Couldn't load config file from on-disk location. Falling back to default location. Reason: Won't serialize in _readDictionaryFromJSONData due to nil object
04/05/2015 19:00:11.473 spindump[412]: Saved wakeups_resource.diag report for WindowServer version ??? (???) to /Library/Logs/DiagnosticReports/WindowServer_2015-05-04-190011_Paul-Breedens-im ac-5.wakeups_resource.diag
04/05/2015 19:00:56.197 com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
04/05/2015 19:00:56.530 iconservicesd[59]: Failed to move temp file /Library/Caches/com.apple.iconservices.store/B9FF2D6E-5D0C-1218-402C-B706F28B0A 68.isdata.tmp to /Library/Caches/com.apple.iconservices.store/B9FF2D6E-5D0C-1218-402C-B706F28B0A 68.isdata with error: Error Domain=NSCocoaErrorDomain Code=516 "“B9FF2D6E-5D0C-1218-402C-B706F28B0A68.isdata.tmp” couldn’t be moved to “com.apple.iconservices.store” because an item with the same name already exists." UserInfo=0x7fb949c13070 {NSSourceFilePathErrorKey=/Library/Caches/com.apple.iconservices.store/B9FF2D6E -5D0C-1218-402C-B706F28B0A68.isdata.tmp, NSUserStringVariant=(
Move
), NSDestinationFilePath=/Library/Caches/com.apple.iconservices.store/B9FF2D6E-5D0 C-1218-402C-B706F28B0A68.isdata, NSFilePath=/Library/Caches/com.apple.iconservices.store/B9FF2D6E-5D0C-1218-402C -B706F28B0A68.isdata.tmp, NSUnderlyingError=0x7fb949c11ba0 "The operation couldn’t be completed. File exists"}
04/05/2015 19:00:57.204 QuickLookSatellite[545]: Failed to obtain sandbox extension for path=/Users/leopard/Library/Caches/com.apple.quicklook.satellite. Errno:1
04/05/2015 19:00:57.211 QuickLookSatellite[545]: Failed to obtain sandbox extension for path=/Users/leopard/Library/Caches/com.apple.quicklook.satellite. Errno:1
04/05/2015 19:00:57.796 QuickLookSatellite[545]: CGSConnectionByID: 0 is not a valid connection ID.
04/05/2015 19:00:57.796 QuickLookSatellite[545]: Invalid Connection ID 0
04/05/2015 19:01:02.753 sandboxd[328]: ([545]) QuickLookSatelli(545) deny file-issue-extension /Users/leopard/Library/Caches/com.apple.quicklook.satellite
04/05/2015 19:01:02.824 sandboxd[328]: ([545]) QuickLookSatelli(545) deny mach-lookup com.apple.nsurlstorage-cache
04/05/2015 19:01:02.837 sandboxd[328]: ([545]) QuickLookSatelli(545) deny file-issue-extension /Users/leopard/Library/Caches/com.apple.quicklook.satellite
04/05/2015 19:01:02.896 sandboxd[328]: ([545]) QuickLookSatelli(545) deny mach-lookup com.apple.nsurlstorage-cache
04/05/2015 19:01:08.015 com.apple.xpc.launchd[1]: (com.apple.quicklook.satellite.7940DB53-496F-47D2-87E2-C3EE3CBF1E27[545]) Service exited due to signal: Killed: 9
04/05/2015 19:01:19.128 apsd[75]: Illegal subject name missing 'courier.push.apple.com' (2.5.4.3): ({
label = "2.5.4.6";
"localized label" = "2.5.4.6";
type = string;
value = US;
label = "2.5.4.8";
"localized label" = "2.5.4.8";
type = string;
value = California;
label = "2.5.4.7";
"localized label" = "2.5.4.7";
type = string;
value = Cupertino;
label = "2.5.4.10";
"localized label" = "2.5.4.10";
type = string;
value = "Apple Inc.";
label = "2.5.4.3";
"localized label" = "2.5.4.3";
type = string;
value = "courier.sandbox.push.apple.com";
04/05/2015 19:01:24.087 Adobe InDesign CS5[550]: WARNING: The Gestalt selector gestaltSystemVersion is returning 10.9.3 instead of 10.10.3. Use NSProcessInfo's operatingSystemVersion property to get correct system version number.
Call location:
04/05/2015 19:01:24.087 Adobe InDesign CS5[550]: 0 CarbonCore 0x93ff9291 ___Gestalt_SystemVersion_block_invoke + 135
04/05/2015 19:01:24.087 Adobe InDesign CS5[550]: 1 libdispatch.dylib 0x9a9460b5 dispatch_once_f + 251
04/05/2015 19:01:24.087 Adobe InDesign CS5[550]: 2 libdispatch.dylib 0x9a9470d8 dispatch_once + 31
04/05/2015 19:01:24.088 Adobe InDesign CS5[550]: 3 CarbonCore 0x93f7269d _Gestalt_SystemVersion + 1050
04/05/2015 19:01:24.088 Adobe InDesign CS5[550]: 4 CarbonCore 0x93f717c0 Gestalt + 150
04/05/2015 19:01:24.088 Adobe InDesign CS5[550]: 5 AdobeAFL 0x016ebfae _ZN5adobe3afl12MacFileUtils13AFileToFSSpecERKNS0_5AFileER6FSSpec + 5254
04/05/2015 19:01:24.088 Adobe InDesign CS5[550]: 6 ??? 0x8feb70b3 0x0 + 2414571699
04/05/2015 19:01:28.908 Mail[309]: {"status":"400","schemes":"Bearer","scope":"https://mail.google.com/"}
04/05/2015 19:01:28.952 Adobe InDesign CS5[550]: The function ‘CGSFlushWindow’ is obsolete and will be removed in an upcoming update. Unfortunately, this application, or a library it uses, is using this obsolete function, and is thereby contributing to an overall degradation of system performance. Please use `CGSFlushWindowContentRegion' instead.
04/05/2015 19:01:29.229 Mail[309]: XOAUTH2 requires user
04/05/2015 19:01:29.229 Mail[309]: Failed to start the SASL connection
SASL(-1): generic failure: XOAUTH2 requires user
Hope this isn't too much ... thanks again for everyone's input. -
Mac Book Pro slow with boot up since Mavericks upgrade
Hi folks,
my mac book pro is booting up very slow and running slow as well since I upgraded to Mavericks.
Tried cleaning up, booting in safe mode, veryfying disk utility but nothing detected.
Can someone check my ETRE or does anyone have another idea what I can do to better the overall performance of my mac?
Thanks and cheers
EtreCheck version: 1.9.11 (43) - report generated 10 June 2014 1:19:56 pm GMT+2
Hardware Information:
MacBook Pro (15-inch, Mid 2009)
MacBook Pro - model: MacBookPro5,3
1 2.66 GHz Intel Core 2 Duo CPU: 2 cores
4 GB RAM
Video Information:
NVIDIA GeForce 9400M - VRAM: 256 MB
NVIDIA GeForce 9600M GT - VRAM: 256 MB
System Software:
OS X 10.9.3 (13D65) - Uptime: 0 days 0:14:20
Disk Information:
Hitachi HTS545032B9SA02 disk0 : (320.07 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 319.21 GB (91.53 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-868
USB Information:
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Gatekeeper:
Mac App Store and identified developers
Kernel Extensions:
[not loaded] com.wdc.driver.1394HP (1.0.11 - SDK 10.4) Support
[not loaded] com.wdc.driver.1394_64HP (1.0.1 - SDK 10.6) Support
[not loaded] com.wdc.driver.USBHP (1.0.11) Support
[not loaded] com.wdc.driver.USB_64HP (1.0.0 - SDK 10.6) Support
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
User Launch Agents:
[loaded] com.facebook.videochat.[redacted].plist Support
User Login Items:
Skype
Dropbox
Internet Plug-ins:
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
FlashPlayer-10.6: Version: 13.0.0.214 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 13.0.0.214 - SDK 10.6 Outdated! Update
Default Browser: Version: 537 - SDK 10.9
SharePointBrowserPlugin: Version: 14.3.6 - SDK 10.6 Support
Silverlight: Version: 4.0.50826.0 Support
iPhotoPhotocast: Version: 7.0
Safari Extensions:
DuckDuckGo: Version: 1.6.1
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
Picasa: Version: 1.0 Support
3rd Party Preference Panes:
Flash Player Support
Time Machine:
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 297.29 GB Disk used: 212.05 GB
Destinations:
My Passport for Mac [Local] (Last used)
Total size: 931.16 GB
Total number of backups: 2
Oldest backup: 2014-05-15 12:51:17 +0000
Last backup: 2014-05-30 21:29:41 +0000
Size of backup disk: Excellent
Backup size 931.16 GB > (Disk size 297.29 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
3% WindowServer
3% Dropbox
1% fontd
0% com.apple.WebKit.WebContent
0% Skype
Top Processes by Memory:
172 MB com.apple.WebKit.WebContent
143 MB Safari
82 MB Skype
78 MB Dropbox
66 MB mds_stores
Virtual Memory Information:
1.90 GB Free RAM
1.18 GB Active RAM
190 MB Inactive RAM
495 MB Wired RAM
273 MB Page-ins
0 B Page-outs[not loaded] com.wdc.driver.1394HP (1.0.11 - SDK 10.4) Support
[not loaded] com.wdc.driver.1394_64HP (1.0.1 - SDK 10.6) Support
[not loaded] com.wdc.driver.USBHP (1.0.11) Support
[not loaded] com.wdc.driver.USB_64HP (1.0.0 - SDK 10.6) Support
Western Digital Software and Mavericks
Remove the software.
Activity Monitor - Mavericks
Activity Monitor in Mavericks has significant changes
Performance Guide
Why is my computer slow
Why your Mac runs slower than it should
Slow Mac After Mavericks
Things you can do to resolve slowdowns see post by Kappy -
Hi: my mac air safari is not loading all websites since i upgraded my software.. it download only few website and crome in the mac is not responding at all.. what to do please advise ???
Safari Problems
Safari - Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues
Try setting up another admin user account to see if the same problem continues. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
Isolating an issue by using another user account
If the problem is still there, try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode
Safe Mode - About -
Since i upgraded to Yosemite, my iMac is too slow
Since i upgraded to Yosemite, my iMac is too slow. For example, at the starting up, it needs minutes 34" to open.
When i open a window / folder, i need between 1 and 2 minutes. By opening a pdf or an other document i uses 2 to 7 minutes.
WHY? How can i change this?1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Bluetooth SerialATA Fonts 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB 'com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx' '879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487' 51 5120 files 4 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[46]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p ' '/^root$/p' ' !/^\/[AD]|\/Contents\/.+\/Contents\//&&/\/(Lib|usr).+\/(.+\.framework|Contents|Info\.plist|Resources|Versions)$/ { n++;sub(/\/Info\.plist$/,"");sub(/\/(Content|Resource|Version)s(\/.+)?/,"");print|"sort|uniq";} END { if(n<1100) print "/System/";} ' '/\.dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /^\/[AD]/d;p;' 's/Pr.+n //p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&& $3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T~/^Apple b/) { f="";l=0;while("PlistBuddy -c Print "F|getline g) { l++;if(l<=L) f=f"\n "g;};};if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+\)$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END { if(i>1) print n;} ' ' s/:[^:]+$//;s/ +([0-9]+)(.+)/\2 x\1/p;' ' { gsub(/[()"]/,"",$3);if(!$3) $3="N/A";print $3;} ' ' /es: ./{ s/^.+://;b0'$'\n'' };/^ +C.+ted: +[NY]/H;/:$/b0'$'\n'' d;:0'$'\n'' x;/: +N/d;s/\n.+//p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom 'mdfind -onlyin /' ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e netstat mdls );S1() { printf kMDItemContentTypeTree=com.apple.$1'|sort';};S2() { printf 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :'$1'" {} \;|uniq';};c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" "`S2 CFBundleDisplayName`" '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '-F \$Message -k Sender kernel -k Message CSeq "I/O e"|sort|uniq -c' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne '08012|Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|idle ex|inval|jnl:|last value [1-9]|NVDA\(|pagin|pci pa|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' "`S1 bundle`" "`S1 mach-o-dylib`" `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " -i '-app Safari UserStyleSheetEnabled' -name\ kMDItem${p[35]} "`S2 ${p[35]}`" );N1=${#c2[@]};for j in {0..10};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files I/O\ errors 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns Nets Stylesheet );N3=${#l[@]};for i in {0..3};do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 0 $((N1+8)) 71 $((N3+3));D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D13 5 5 69 1;D13 5 54 30 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 24 22 29;B7 12;B2 14;A4 39 57 70 14;B2 15;B6 14 15 4;C3 29;A1 24 23 32;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+10)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 38 55 68 57;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;A1 4 3 60;B2 30;A1 4 58 60;B2 31;B6 30 31 4;C3 5;D12 21 56 35 58;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Ever since my upgrade to lion 10.7.3, and iCloud, my macbook is running extremely slow. What can I do? It doesn't seem like my contacts are pushing through to the computer from iPhone.
Then your basic issues are: too little RAM, incompatible software, dysfunctional installation.
Add more RAM or kill as many programs that you use until the computer is running normally.
See App Compatibility Table - RoaringApps. Upgrade any old software.
Reinstall OS X:
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it isthree times faster than wireless. -
Since I upgraded my Ipad2 to IOS6, I keep getting kicked out of Safari after I am in the middle of searching for something. Also, Ebay kicks me back to first item if I click on an item, say number 153 or 642! Very annoying. Even CNN kicked me out back to Ipad home screen last night! How do I make it stop???
My question is this:
What is the best way of getting the pictures out of the iPhoto Library? I
Select the photos you want out and export them as JPGEs - kind = current for the current edited version - kind = original for the original
f I get access to the original folders within the library by right-clicking any photo and then being able to browse inside the library, am I going to have any problems if I copy or move those original pictures directly to a folder outside of the iPhoto Library?
Copying photos out will not be a problem if you make no errors - for me that is not a good bet - it is best to stay out of yoru iPhoto library
Would it be better to export the pictures?
Yes
Does exporting using "current" under "Kind" give you the original more safely?
No - it gives you the current version which may be the original if no changes have been made or will be the current edited version if edits ahve been made
Also, any suggestions on how to best have photos OUTSIDE of an iPhoto library organized so that iPhoto can reference them, but your backup is also organized?
In the iPhoto preferences un check the advanced preference to "copy imported items to the iPhoto library"
HOWEVER - this is not recommended - it makes importing more complicated, deleting more complicated and makes replacing a hard drive or going to a new computer much more difficult - and it puts you totally in charge of your original photos - being sure that they are there and do not get moved
I'd like to have my photos organized by date in the backup as well, so that I don't have to backup all my pictures every time I add new ones, just add the latest to the backup drive.
Finally, any suggestions on what to do with pictures that you scan so that they appear by the date they were taken as opposed to the date they were scanned? Is there a way to modify the date of the photo info?
Select the photos in iPhoto and use the batch change command under the photos menu - the tiem and date option
LN -
Problems with browsing on Safari and Firefox since Leopard upgrade ??
Ever since I upgraded to Leopard, I am experiencing consistent problems while browsing. Both Firefox and Safari stall when I click on links or try to load pages. The browsers just appears dead and the loading icons just stall. Firefox is much worse than Safari with every 3rd or 4th click causing a stall. I have to wait about a minute before the click is recognized and the page is loaded.
I thought it might be my airport connect but I have other Windows comps on the same network and they don't have the problem.
I haven't seen any thread in the Safari discussions about this and can't find anything on the net about it either.
Anyone know what the problem might be?
Safari 3.1.1
Firefox 2.0.0.14
Leaopard 10.5.2There were no error messages in the console for the stalling. However after I plugged the ethernet cable into the Imac, the problem seems to have gone away.
This is good but how can I fix the problem with my airport wireless connection ?
Maybe you are looking for
-
I restored from iTunes backup but it goes back to 'welcome to your new iphone'
My iphone 5 was replaced today because of a faulty power button. I had done an iTunes backup this morning, choosing to backup iTunes purchases and the apps as well. In order to restore the backup to my new phone I had to set it up as a new phone and
-
Build unsuccessfull product not found on the system or has been upgraded: daqmx 8.7
I get the following error when doing a build: The build was unsuccessful. The following product(s) are not found on the system or have been upgraded: NI-DAQmx 8.7 I just upgraded from LabView 8.6 to 8.61. Any ideas?
-
I have deleated java and reinstalled from sun but still I can communicate because the site cannot find java on my firefox. It is my bank site and there was no problem earlyer
-
Input level resets every time using FaceTime
Hi. I recently added a webcam to my Mac Mini to use with FaceTime. (It's an IceCam 2). Works fine for my needs, except every time I connect with Facetime, the input level gets reset to 0. I'm able to change it back via system preferences, but is t
-
Recently I've been having a problem with Mail. Messages that are moved to the Trash are saved there unless I delete them manually. I was always able to retrieve messages without a problem, but recently half my messages come up with this message: The