Slow. iMac 10.5.8. Verified Disk Permissions and then Repaired Disk Permissions. Not much improvement in speed. How do I empty internet files from safari?

iMac 10.5.8 is slow. Verified Disk Permissions and then repaired. No big improvement in speed.
What about internet files (safari and firefox) ; caches and cookies?
Thank you.

Applejack might help.
Download:
http://sourceforge.net/projects/applejack/
Article on using:
http://reviews.cnet.com/8301-13727_7-10334620-263.html?tag=mfiredir
It runs in single user mode, where it runs more safely than other maintenance/cleaning programs because there is less chance of interference from the OS. After installing (you won't see it in the Applications Folder) hold CMD-S at startup. You will get a black screen with MS-DOS like text. Just follow the prompts: type in "applejack AUTO" and it will run through the following:
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
Trash old Log files.
You can also run tasks selectively and for specific users by typing in "applejack." After running in "AUTO," you can go back and run it again as "applejack," steps 3 & 4 only, for your user.
The first reboot will take much longer than usual, as it rebuilds caches. It may take several restarts to see the benefits. Because of the deep cache cleaning in AUTO mode some applications may tell you they are being opened for the first time.
NOT YET UPDATED FOR LION
(Adapted from post by BDAqua)

Similar Messages

How does one remove temporary files from Safari? A friend logged on to her Facebook account using my iMac. Now I can't remove her e-mail address from Facebook. It was suggested to me that I try clearing temporary files from Safari but I can't find

How does one remove temporary files from Safari? A friend logged on to her Facebook account using my iMac running Mac OSX 10.7.5 and Safari 6.1.6. Now I can't remove her e-mail address from my computer. When I open Facebook her address shows in the user button. I do not have a Facebook account. It was suggested to me that I try clearing temporary files from Safari but I can't find anything that tells me how to do this. Are temporary files the same as the cache? It also was suggested that I try clearing Safari cache. How do I do that?

Check Safari/Preferences/Passwords to see if the Facebook account is there. If so, select it and remove it. If you are still having problems, Safari/Preferences/Advanced - enable the Develop menu, then go there and Empty Caches. Quit/reopen Safari and test. If that doesn't work, Safari/Reset Safari.

Anyone clean their mac using the disk utility using the repair disk permissions??

anyone clean their mac using the disk utility using the repair disk permissions??

No. Threads don't hurt anything. If your computer is not functioning properly perhaps you need to try some basic maintenance. Let's start by having you do this:
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Next, try booting into Safe Mode then immediately restart normally. Safe mode is going to take a while so be patient. It's slow.
Next, create a new user account. Log out of your account then log into the new account. Try using iPhoto and the publishing button. Do they work now?
If you still have a problem, then do the following. If you don't want to go through the above then just start with the following and forget the others above.
Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

Why isn't Disk Utility clear after "Repair Disk Permissions"?

Having used my computer for several days I decided to use Disk Utility to “Repair Disk Permissions” after a few hours of use.
2008-11-29 08:30:17 -0800: Disk Utility started.
2008-11-29 08:30:24 -0800: Repairing permissions for “Macintosh HD”
2008-11-29 08:30:24 -0800: Reading permissions database.
2008-11-29 08:30:24 -0800: Reading the permissions database can take several minutes.
2008-11-29 08:43:29 -0800: Permissions differ on "private/var/log/secure.log", should be -rw------- , they are -rw-r----- .
2008-11-29 08:48:26 -0800: Group differs on "private/etc/cups", should be 0, group is 26.
2008-11-29 08:48:28 -0800:
2008-11-29 08:48:28 -0800: Permissions repair complete
2008-11-29 08:48:28 -0800:
2008-11-29 08:48:28 -0800:
I shut down the computer, turned off its power for 1 minute and restarted. I initiated Disk Utility once again.
2008-11-29 09:16:42 -0800: Disk Utility started.
2008-11-29 09:20:55 -0800: Repairing permissions for “Macintosh HD”
2008-11-29 09:20:55 -0800: Reading permissions database.
2008-11-29 09:20:55 -0800: Reading the permissions database can take several minutes.
2008-11-29 09:38:47 -0800: Group differs on "private/etc/cups", should be 0, group is 26.
2008-11-29 09:38:49 -0800:
2008-11-29 09:38:49 -0800: Permissions repair complete
2008-11-29 09:38:49 -0800:
2008-11-29 09:38:49 -0800:
When Disk Utility was finished, I clicked on “Clear History” and reran “Repair Disk Permissions.”
2008-11-29 09:42:01 -0800: Repairing permissions for “Macintosh HD”
2008-11-29 09:42:01 -0800: Reading permissions database.
2008-11-29 09:42:01 -0800: Reading the permissions database can take several minutes.
2008-11-29 10:00:19 -0800:
2008-11-29 10:00:19 -0800: Permissions repair complete
2008-11-29 10:00:19 -0800:
2008-11-29 10:00:19 -0800:
Now everything seems clear.
My question...
Why did I initially see:
2008-11-29 08:43:29 -0800: Permissions differ on "private/var/log/secure.log", should be -rw------- , they are -rw-r----- .
2008-11-29 08:48:26 -0800: Group differs on "private/etc/cups", should be 0, group is 26.
and why after restarting should I end up with only
2008-11-29 09:38:47 -0800: Group differs on "private/etc/cups", should be 0, group is 26.
and after “Clear History” and rerunning Disk Utility why is everything clear until I start using the computer again?
I’ve had it explained that “Group differs on "private/etc/cups", should be 0, group is 26” is not meaningful, but I’d like to know WHY it happens. I’d also like to know why “ Permissions differ on "private/var/log/secure.log", should be -rw------- , they are -rw-r----- .” initially appears.
Thank you,
ZTIWYM3ZUI

As a casual "Apple Discussions" user it hadn't occurred to me that if a question had been answered previously, it should never be asked again.
It's not that. It's because the problem's been beaten to death over the past fourteen months, since Apple shipped Leopard, that most consider it common knowledge, no matter where one's been visiting or how often. Every Apple/Macintosh related website has addressed the never ending issue. Finally, since the forums Help file says:
*I have a question or issue—how do I search for answers?*
+It's possible that your question or issue has already been answered by other members so do a search before posting a question. On most Apple Discussions pages, you'll find a Search Discussions box in the upper right corner. Enter a search term (or terms) in the field and press Return. Your results will appear as a list of links to posts below the Search Discussions Content pane.+
+You can also refine your search by using the options in the Search Discussions Content pane. Click the Search Tips link for help with our search features. You can streamline your results by restricting your search terms by category or forum, specifying a date range, or searching for posts by username. You can also search the User Tips Library.+
Maybe that should be retitled: *+I have a question or issue—how do I resolve it?+*
Just out of curiosity, I wonder if any of these exceptional people can figure out my signature.
ZTIWYM3ZUI - "time is what you make—use it" or something of that nature.

Disk utility unable to repair disk. What next?

Disk utility unable to repair disk. What next?

I encountered the same problem. After verify disk, I got the message to repair the disk. But it was unable to complete the repair. Rather than purchase Disk Warrior, I tried something else.
What I did was reinstall the OSX (this iMac is still on Leopard). I backed up everything, naturally, before doing the reinstall. I chose the "Archive and Install" option, along with "Preserve Users and Network Settings". This method moves existing files to a folder named "Previous System" and imports existing user accounts, network settings, and home folders into the new OSX.
After the successful reinstall, I ran Disk Utility. It checked AND repaired Permissions. It verified that the disk was fine and no longer needed repair.
If this didn't work, my plan "B" was to reinstall the OSX again, this time with the "Erase and Install" option. Fortunately, I didn't have to go to plan "B".

Disk Utility - Can't repair Disk - Help needed :(

Hi,
I have some trouble to use Disk Utility (on my iBook G4 - 1.33 Ghz+1 GB RAM)
I run Disk Utility to verify and repair permissions, which worked, and then Verify Disk. HEre is the logged result:
++++++++++++++++++++++++++++++++++++++++++++++++++++
Aug 26 09:32:58: Disk Utility started.
Verify permissions for “E=G4”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Verifying volume “E=G4”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Volume Bit Map needs minor repair
Checking volume information.
Invalid volume free block count
Invalid volume free block count
uld be %@ instead of %@)",2)
4078185
4078184
Volume Header needs minor repair
The volume E=G4 needs to be repaired.
Error: The underlying task reported failure on exit
Disk Utility stopped verifying “E=G4” because the following error was encountered:
The underlying task reported failure on exit
1 HFS volume checked
Volume needs repair
+++++++++++++++++++++++++++++++++++++++++++++++++++++
I wanted to run Disk Repair, but the button would not highlight, therefore could not be started.
I retried today, and now the Verify Disk task won't even work, blocking Disk Utility (needs force quit)
(E=G4 is the name of my Hard Drive on the iBook)
I also tried TechTool Deluxe coming with Applecare protection plan, but TTD can not check the "Volume Structure".
Has anyone got any tips or sequence to solve this?
Thanks in advance
Yann
Message was edited by: ObiYann

I just ran the Disk Utility, and cannot very disk. It gives me an error message;
Error: The underlying task reported failure on exit
1 HFS volume checked
Volume needs repair
and when I run the repair, this is the message:
The volume GERRARD could not be repaired.
Error: The underlying task reported failure on exit
1 HFS volume checked
1 volume could not be repaired because of an error
Repair attempted on 1 volume
1 volume could not be repaired
Prior to running Disk Utility, I have already tried DiskWarrior, and could not repair my disk. Anyway I can fix this problem??? Formatting the disk would be my last option (though I am unsure if it will fix the problem). Any advise would be greatly appreciated. Meanwhile, I will continue to back up my file, and delete unused data and try to run it again.
Thank you all very much for any input.
Cheers,
Matt

IBook G4 slowed SIGNIFICANTLY & FREEZES with OSX 10.4.8 and then 10.4.9 too

Hi,
My iBook G4 slowed SIGNIFICANTLY after installing OSX 10.4.8 and then 10.4.9 and freezes often too!!!
I mean, it takes a few minuets to boot-up sometimes.... I hate that spinning wheel!
It ran great before the two up-dates, and I have done all the "verify and repair" that can possibly be done with and without the original installation DVD, including disk repair.
I had no other programs running at the installation, nor were there USB or Firewire attached. But I was plugged into the local network (how else was I supposed to download the upgrade).
Basically, can I revert to 10.4.7???
Or, is there a simple solution?

Hi Thanks for the help,
S.M.A.R.T. Status: Verified, is appearing just like
that.
OK, that's a good sign, though it doesn't necessarily mean that everything is okay with the drive, just that nothing is currently far enough out of spec to get flagged.
I looked in the console (I dont even know what it is)
and the only things I could find that looked dodgey
were lines such as those below...
Apr 12 10:19:11 localhost launchd: Server 3d2b in
bootstrap 1103 uid 0: "/usr/sbin/lookupd"[41]: exited
abnormally: Hangup
Apr 12 10:19:18 james-rk-modzelewskis-ibook-g4
launchd: Server 0 in bootstrap 1103 uid 0:
"/usr/sbin/lookupd"[55]: exited abnormally: Hangup
Apr 18 11:14:20 james-rk-modzelewskis-ibook-g4
launchd: Server 0 in bootstrap 1103 uid 0:
"/usr/sbin/lookupd"[55]: exited abnormally: Hangup
These occur a few dozen times throughout the system
log. Does it mean anything to you???
Those are harmless, I think. I've seen them on my laptop, I think around when I switch the network from ethernet to AirPort or vice versa. And maybe when I put the computer to sleep, too.
One thing you should try to do is see if you can figure out a pattern to the stalls and freezes. Do they only happen when you're on the Internet? Maybe just with one particular web site or page? Also, try running Activity Monitor and keep an eye on it to see if you can catch the name of a process that's taking too much processor time.
How much RAM does your computer have, and how much free space on your hard drive? That can make a difference, too. You should have a few GB (I like to keep at least 8GB free on my PowerBook) of free hard drive space. 512 MB of RAM is pretty much the minimum for Tiger, I think. Less than that and you'll find the computer will be using swap space on the hard drive quite a bit if you try to do anything but the bare minimum of simple web pages and email.
charlie

IBook G4 "slowed" SIGNIFICANTLY afte installing OSX 10.4.8 and then 10.4.9

Hi,
My iBook G4 slowed SIGNIFICANTLY after installing OSX 10.4.8 and then 10.4.9 and freezes often too!!!
I mean, it takes a few minuets to boot-up sometimes.... I hate that spinning wheel!
It ran great before the two up-dates, and I have done all the "verify and repair" that can possibly be done with and without the original installation DVD.
Basically, can I revert to 10.4.7???
Or, is there a simple solution?

First let's take a step back and have a look at your upgrade procedures. Here is one suggestion of how to proceed:
Mac OS X 10.4.9: Update procedure recommendation
First, make a full backup of your current Mac OS X installation -- preferably a clone ( try SuperDuper! or Carbon Copy Cloner). If something goes wrong, or you experience a major incompatibility after updating, the backup will prove invaluable.
Next, if you are the cautious type, run a disk repair on the volume targeted for installation. You can use an n alternative startup drive or your Mac OS X installation disc. If you are starting up from your Mac OS X install disc, put the disc in your optical drive and restart holding down the "C" key. After your system starts up and you've selected your language, go to the "Utilties" menu and select "Disk Utility." Use the "Repair Disk" function. After disk repairs are complete, restart from your normal startup drive and continue.
Avoid performing any other operations (in Mac OS X or third-party applications) while the update process is occurring. Performing other tasks during the update process potentiates various issues, including problems with prebinding (which is happening during the "Optimizing the system" phase of the update process) and others that can occur when files are being replaced by the update are also being read/written by the currently logged in user. You should not only refrain from launching applications or working with files during the update process, but also from putting the system to sleep, disconnecting/connecting devices, and other potentially interruptive actions.
In addition, before installing the update, make sure all Apple-installed applications and utilities are in their original locations. Moving one of these applications to a different location on your hard drive can lead to an incomplete update. Also, disconnect any FireWire/USB devices before applying Mac OS X 10.4.9 (except for your startup drive, if it is FireWire or USB, and your keyboard/mouse), then re-connect the devices one by one (checking for issues created by any particular device) after the update process is complete and the system has restarted. Also, note that the first restart after applying Mac OS X 10.4.9 may be abnormally long. Subsequent restarts should take place at normal speed.

Disk Utility can't repair disk

Hi, I just saw that the amount of memory left on my HD just dropped around 60GB, so I used the "Verify Disk" option on Disk Utility, and the output was:
Verifying volume “Macintosh HD”
Performing live verification.
Checking Journaled HFS Plus volume.
Checking extents overflow file.
Checking catalog file.
Checking multi-linked files.
Checking catalog hierarchy.
Checking extended attributes file.
Checking volume bitmap.
Checking volume information.
Volume header needs minor repair
The volume Macintosh HD was found corrupt and needs to be repaired.
Error: This disk needs to be repaired. Start up your computer with another disk (such as your Mac OS X installation disc), and then use Disk Utility to repair this disk.
I don't have the disk right now, so is there some other way I can repair it, get another install disk, or anything else? I've been thinking of booting up with a Linux livecd, but can it access the HFS+ filesystem?
Thanks.

Try this: from http://support.apple.com/kb/TS1417
Start up your computer in single-user mode to reach the command line.
Note: If necessary, perform a forced restart as described in the Emergency Troubleshooting Handbook that came with your computer. On desktop computers, you can do this by pressing the reset/interrupt button (if there is one) or holding down the power button for several seconds. On portable computers, simultaneously press the Command-Control-power keys. If your portable computer doesn't restart with this method, you may need to reset the Power Manager.
At the command-line prompt type:
/sbin/fsck -fy
Press Return. fsck will go through five "phases" and then return information about your disk's use and fragmentation. Once it finishes, it'll display this message if no issue is found:
** The volume (name_of_volume) appears to be OKIf fsck found issues and has altered, repaired, or fixed anything, it will display this message:
***** FILE SYSTEM WAS MODIFIED *****
Important: If this message appears, repeat the fsck command you typed in step 2 until fsck tells you that your volume appears to be OK (first-pass repairs may uncover additional issues, so this is a normal thing to do).
When fsck reports that your volume is OK, typerebootat the prompt and then press Return.
Your computer should start up normally and allow you to log in.
If you can't find your original install disk, you could always buy another Snow Leopard disk. It's only $29.

Macbook Pro not booting after update. ''Disk Utility can't repair disk''. Help needed!

I have recently updated my macbook pro as I had some pending software updates. I left it to do the job over night and the next day I noticed it was not letting me sign in to my account session as usual.
I restarted the computer and ever since then when I boot it, it just shows the apple grey screen with a bar that loads to about a 3rd and then it turns off again. I have contacted apple but they were unable to help me with this.
So far I have tried to:
1. Re-install OS X 10.8 - but it says the disk is locked or OS X cannot be installed on Recovery HD.
2. Verify and Repair the disk and I errors but it cannot fix them. Some are:
               'invalid leaf count''
               ''missing thread record''
               ''incorrect number of file hard links''
               ''overlapped extent allocation''
          and it finally says ''the volume Macintosh HD cannot be repaired'' Error: ''Disk Utility can't repair this disk.. disk, and restore your backed up files.
I would like to know a way to back up my files so that i can completely restore the disk without any data loss as I havent backed up for a while!
If anyone has any solution to this issue it would be much appreciated!

I just ran the Disk Utility, and cannot very disk. It gives me an error message;
Error: The underlying task reported failure on exit
1 HFS volume checked
Volume needs repair
and when I run the repair, this is the message:
The volume GERRARD could not be repaired.
Error: The underlying task reported failure on exit
1 HFS volume checked
1 volume could not be repaired because of an error
Repair attempted on 1 volume
1 volume could not be repaired
Prior to running Disk Utility, I have already tried DiskWarrior, and could not repair my disk. Anyway I can fix this problem??? Formatting the disk would be my last option (though I am unsure if it will fix the problem). Any advise would be greatly appreciated. Meanwhile, I will continue to back up my file, and delete unused data and try to run it again.
Thank you all very much for any input.
Cheers,
Matt

Disk utility can't repair disk, back up and restore files......I need help, I'm worried I'll lose all my photos, files etc

Mac started hanging up while streamlining a kids show. Restarted and got the screen with the apple and the circle. restarted with control-option p and r. Ran disk repairitem got the following results;
invalid index key,
it rebuilds catalog b-tree,
volume repair complete,
updating boot support partitions for the volume as required,
Error disk utility can't repair disk
I'm then prompted to back up all files, reformat the disk and restore backed up files.
Obviously need help here as I think I'm in danger of losing my files, photos etc if I don't do this right.
Can anyone help
Steve

You might want to back up the disk as soon as possible, do the repair, then back it up again. First time will have the issues that Disk Utility can't fix, however, you'll have the data saved. Then, once you get things repaired, make a new backup, and go from there.
If you're going to use a hard drive directly connected to your iMac for backup, this is what I mentioned earlier: http://twelvesouth.com/products/backpack/ Great way to use space behind the iMac without adding something else to the desk top. You can buy it through Apple online/stores or Amazon, and there are probably other sources too.
For external hard drives, I like those sold by OWC at http://eshop.macsales.com/shop/firewire/ as many of them use Oxford chip sets, wihch work well with macs (I've used several for years with no issues). Most pre-packaged drive/cases have a 3 year warranty, although you can buy a case and add your own hard drive. I like Western Digital Scorpio Blacks that have a 5 year warranty.

Imac 21inch 2010 on boot vertical green lines then white screen ,will not load can anyone help please

imac 21inch 2010 on boot vertical green lines then white screen ,will not load can anyone help please

Howdy carliosa,
If your iMac is not starting up normally you may need to do some checking to make sure things are working correctly. I would suggest starting with the steps in this article -
Resolve startup issues and perform disk maintenance with Disk Utility and fsck - Apple Support
Thanks for using Apple Support Communities.
Best,
Brett L

How can I delete PDF files from my iMac desktop?

How can I delete PDF files from my iMac desktop?

Not on my system,When I try to dump if off in the trash it will not go. I get a message that says this file cannot be removed. I also tried going to File and clicking on Move to Trash. No dice.

I want a new Imac Core 2 Duo how do I move my files from my PowerPC G3?

I want to get a new Imac Core 2 Duo but I can't figure out how to move my old files from my very old PowerPC G3 to a new Imac when I get it -- which I hope is very soon. The G3 has a CD drive but it is not a CD burner, has a Zip Drive, does not have firewire ports or USB ports -- how on earth can I move my stuff over to the new computer? It does have a 10baseT port [I think that's what it is] -- maybe that's the key? I hope someone can help.
PowerPC G3 Mac OS 9.1.x

2sockeye, yes, you can use the new mac's Migration Assistant Program to help you move files etc to your new mac via a firewire connection.
Before you do that, search more on "migration" etc on this Discussion; Move only your data files (music, photos) as much as possible but do not move applications and especially system files, preferences that may or will override what's in your new Intel mac, it will cause corruption or an unstable system.
Download and install all the applications from ground up, especially 3rd party utilities etc - look for the Universal versions (either stated, or with a blue "ying yang" logo)
Cheers
NEW
No, when you go through the beginning of setting up your new Mac, a page with the Migration Program would appear, and ask you questions on how and what kind of migration you want to perform, it will also ask you (with given instructions) connect the 2 macs up with a firewire cable - this cable goes into your firewire ports
If you don't have a firewire port on your old computer, then search again in this Discussion and under the Support tab, whether on how to transfer data on macs without FW ports

How do I move music files from the startup disc to iTunes in the other internal hard disk os 10.5.8?

How do I move music files from the startup disc to iTunes in the other internal hard disk os 10.5.8?
The music I want to move was in iTunes but is now just files. I had to reinstall a new iTunes and lost all my old music.
Thank you!

That article is about using your iPod as an external hard drive, to move files from one computer to another computer. It is not related to your question.
You can't use iTunes to move song files from iPod to computer, except for songs you purchased from the iTunes Store (and you can also re-download purchases). However, there are third-party methods and utilities that can move song files from iPod to computer. If you do a Google search on something like "ipod transfer," you should get some links.
Once the song files are on your current computer, add them to that computer's iTunes library by dragging the files (or folder containing the files) to the iTunes window. After confirming everything is there (and fixing the data issue you mentioned) you can sync the iPod. You may want to do a Restore on the iPod, if it might have a data corruption issue, which will erase the iPod's hard drive, re-install the latest software, and set it to defautl settings.

Slow. iMac 10.5.8. Verified Disk Permissions and then Repaired Disk Permissions. Not much improvement in speed. How do I empty internet files from safari?

Similar Messages

Maybe you are looking for